Zigbee-Adapter 1.0.2 Danalock

Asgothian

@patrick039212
Das zeigt zumindest das der Adapter versucht das Schloss zu konfigurieren. Kannst Du bitte prüfen (ohne den Adapter neu zu starten)

ob nach der Nacht die Statusmeldungen vom Schloss ankommen ?
ob das Schloss vom ioBroker steuerbar ist ?

Zusätzlich ist die Frage ob im Log von gestern abend / heute morgen noch weitere Einträge zum Configure auftauchen. Kannst du bitte im Log mal nach

DeviceConfigure failed 0x000b57fffe59e779 V3-BTZB

bzw.

DeviceConfigure success 0x000b57fffe59e779 V3-BTZB

suchen ?

Jan Puchta

@Asgothian hallo

ja ich nutze das Schloss
nutze aber den offiziellen Adapter 1.2.1 da es mein Running System ist

ich lasse mein System jeden Tag neu starten, wenn ich das DanaLock repaire funktioniert es bis zum nächsten Neustart
über die Analyse kann ich den Status manuell abrufen, nutze ich meist über vpn wenn ich längere Montagen habe und sicher gehen will das meine Wohnung abgeschlossen ist.

wo finde ich die gepatchte Version?

Asgothian

@Jan-Puchta
https://github.com/asgothian/ioBroker.zigbee

da liegt die gepatchte version. Sie sollte dem 1.2.1 weitgehend entsprechen. Die einzige Modifikation die ich gemacht habe betrifft das erzwungene neu konfigurieren des Schlosses bei Neustart.

A.

Jan Puchta

@Asgothian
habe die version über die katze installiert
woran sehe ich das es die neue gepatchte ist

nach einem reboot funktioniert es trotzdem nicht

das steht im log

zigbee.0	2020-10-04 13:59:37.117	error	at processTimers (internal/timers.js:492:7))
zigbee.0	2020-10-04 13:59:37.117	error	at listOnTimeout (internal/timers.js:549:17)
zigbee.0	2020-10-04 13:59:37.117	error	at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35)
zigbee.0	2020-10-04 13:59:37.117	error	(3956) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms)

Asgothian

@Jan-Puchta Abwarten.. das ist normal, da das Schloss nicht immer auf Nachrichten reagieren wird. Es sollte irgendwann eine Erfolgsmeldung zum Configure kommen.

Erkennen kannst du das gepatcht ist wenn bem Start diese Meldung kommt:

Starting Zigbee V3-BTZB hack...

Jan Puchta

@Asgothian

also beim ersten neustart hat es funktioniert da wird nachdem fail nochmals ein configure ausgeführt

2020-10-04 13:59:21.308 - info: zigbee.0 (3956) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-04 13:59:21.543 - info: zigbee.0 (3956) Starting Zigbee V3-BTZB hack...
2020-10-04 13:59:26.960 - info: zigbee.0 (3956) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-04 13:59:26.977 - info: zigbee.0 (3956) Unable to disable LED, unsupported function.
2020-10-04 13:59:26.978 - info: zigbee.0 (3956) --> transmitPower : high
2020-10-04 13:59:27.002 - info: zigbee.0 (3956) Currently 12 devices are joined:
2020-10-04 13:59:27.026 - info: zigbee.0 (3956) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 13:59:27.041 - info: zigbee.0 (3956) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-04 13:59:27.052 - info: zigbee.0 (3956) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 13:59:27.055 - info: zigbee.0 (3956) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 13:59:27.057 - info: zigbee.0 (3956) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 13:59:27.059 - info: zigbee.0 (3956) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 13:59:27.062 - info: zigbee.0 (3956) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 13:59:27.064 - info: zigbee.0 (3956) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 13:59:27.067 - info: zigbee.0 (3956) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 13:59:27.068 - info: zigbee.0 (3956) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 13:59:27.070 - info: zigbee.0 (3956) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 13:59:27.072 - info: zigbee.0 (3956) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 13:59:27.074 - info: zigbee.0 (3956) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-04 13:59:27.076 - info: zigbee.0 (3956) Zigbee started
2020-10-04 13:59:37.117 - error: zigbee.0 (3956) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35)
at listOnTimeout (internal/timers.js:549:17)
at processTimers (internal/timers.js:492:7))
2020-10-04 13:59:42.636 - info: unifi.0 (3705) Update done
2020-10-04 13:59:43.178 - error: unifi.0 (3705) fetchSites: Returned data is not in valid format
2020-10-04 13:59:45.315 - info: text2command.0 (3679) processText: "🚪 Door lock"
2020-10-04 13:59:45.323 - info: text2command.0 (3679) Control ID zigbee.0.000b57fffe59e847.lockState with : lock
2020-10-04 13:59:45.366 - info: text2command.0 (3679) Response: wird verschlossen
2020-10-04 13:59:56.664 - warn: readFile will not read this file (nuki-logo.png) in future versions: nuki2.admin is not an object of type "meta"
2020-10-04 14:00:00.033 - info: host.ioBroker-Pi4 instance system.adapter.ical.0 started with pid 5330
2020-10-04 14:00:02.375 - info: ical.0 (5330) starting. Version 1.7.4 in /opt/iobroker/node_modules/iobroker.ical, node: v12.18.4, js-controller: 3.1.6
2020-10-04 14:00:03.449 - info: ical.0 (5330) processing URL: Mein Kalendar https://calendar.google.com/calendar/ical/middrive1978%40googlemail.com/private-1fa08408e334c7194a1cc86982a246fa/basic.ics
2020-10-04 14:00:08.886 - info: ical.0 (5330) Terminated (NO_ERROR): Without reason
2020-10-04 14:00:09.410 - info: host.ioBroker-Pi4 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
2020-10-04 14:00:18.421 - info: text2command.0 (3679) processText: "🚪 Door unlock"
2020-10-04 14:00:18.422 - info: text2command.0 (3679) Control ID zigbee.0.000b57fffe59e847.lockState with : unlock
2020-10-04 14:00:18.444 - info: text2command.0 (3679) Response: wird aufgeschlossen
2020-10-04 14:00:19.233 - info: unifi.0 (3705) Update done
2020-10-04 14:00:48.430 - info: unifi.0 (3705) Update done
2020-10-04 14:01:19.781 - info: unifi.0 (3705) Update done
2020-10-04 14:01:49.586 - info: unifi.0 (3705) Update done
2020-10-04 14:02:19.420 - info: unifi.0 (3705) Update done
2020-10-04 14:02:50.487 - info: unifi.0 (3705) Update done
2020-10-04 14:02:59.730 - info: text2command.0 (3679) processText: "🚪 Door lock"
2020-10-04 14:02:59.732 - info: text2command.0 (3679) Control ID zigbee.0.000b57fffe59e847.lockState with : lock
2020-10-04 14:02:59.748 - info: text2command.0 (3679) Response: wird verschlossen
2020-10-04 14:03:19.372 - info: text2command.0 (3679) processText: "🚪 Door unlock"
2020-10-04 14:03:19.373 - info: text2command.0 (3679) Control ID zigbee.0.000b57fffe59e847.lockState with : unlock
2020-10-04 14:03:19.396 - info: text2command.0 (3679) Response: wird aufgeschlossen
2020-10-04 14:03:19.500 - info: unifi.0 (3705) Update done
2020-10-04 14:03:31.554 - info: nut.0 (2445) Start NUT update
2020-10-04 14:03:31.617 - info: nut.0 (2445) All Nut values set
2020-10-04 14:03:49.199 - info: unifi.0 (3705) Update done
2020-10-04 14:04:19.066 - info: unifi.0 (3705) Update done
2020-10-04 14:04:42.701 - info: zigbee.0 (3956) Configuring 0x000b57fffe59e847 V3-BTZB
..........
2020-10-04 14:04:47.216 - info: zigbee.0 (3956) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB

beim zweiten reboot funktioniert es leider nicht mehr (das zweite configure fehlt)

2020-10-04 14:18:37.823 - info: zigbee.0 (3943) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-04 14:18:38.014 - info: zigbee.0 (3943) Starting Zigbee V3-BTZB hack...
2020-10-04 14:18:43.694 - info: zigbee.0 (3943) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-04 14:18:43.707 - info: zigbee.0 (3943) Unable to disable LED, unsupported function.
2020-10-04 14:18:43.708 - info: zigbee.0 (3943) --> transmitPower : high
2020-10-04 14:18:43.724 - info: zigbee.0 (3943) Currently 12 devices are joined:
2020-10-04 14:18:43.735 - info: zigbee.0 (3943) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 14:18:43.744 - info: zigbee.0 (3943) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-04 14:18:43.749 - info: zigbee.0 (3943) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 14:18:43.750 - info: zigbee.0 (3943) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 14:18:43.752 - info: zigbee.0 (3943) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 14:18:43.753 - info: zigbee.0 (3943) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 14:18:43.755 - info: zigbee.0 (3943) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 14:18:43.756 - info: zigbee.0 (3943) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 14:18:43.757 - info: zigbee.0 (3943) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 14:18:43.759 - info: zigbee.0 (3943) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 14:18:43.761 - info: zigbee.0 (3943) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 14:18:43.762 - info: zigbee.0 (3943) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 14:18:43.763 - info: zigbee.0 (3943) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-04 14:18:43.765 - info: zigbee.0 (3943) Zigbee started
2020-10-04 14:18:53.783 - error: zigbee.0 (3943) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35)
at listOnTimeout (internal/timers.js:549:17)
at processTimers (internal/timers.js:492:7))
2020-10-04 14:18:54.491 - info: unifi.0 (3696) Update done
2020-10-04 14:19:05.302 - info: unifi.0 (3696) Update done
2020-10-04 14:19:35.473 - info: unifi.0 (3696) Update done
2020-10-04 14:20:04.551 - info: unifi.0 (3696) Update done
2020-10-04 14:20:36.116 - info: unifi.0 (3696) Update done
2020-10-04 14:21:06.075 - info: unifi.0 (3696) Update done
2020-10-04 14:21:35.556 - info: unifi.0 (3696) Update done
2020-10-04 14:22:05.377 - info: unifi.0 (3696) Update done
2020-10-04 14:22:35.347 - info: unifi.0 (3696) Update done
2020-10-04 14:22:47.527 - info: nut.0 (2451) Start NUT update
2020-10-04 14:22:47.634 - info: nut.0 (2451) All Nut values set
2020-10-04 14:23:05.735 - info: unifi.0 (3696) Update done
2020-10-04 14:23:36.556 - info: unifi.0 (3696) Update done
2020-10-04 14:24:05.611 - info: unifi.0 (3696) Update done
2020-10-04 14:24:35.311 - info: unifi.0 (3696) Update done
2020-10-04 14:25:04.386 - info: unifi.0 (3696) Update done
2020-10-04 14:25:34.351 - info: unifi.0 (3696) Update done
2020-10-04 14:26:04.336 - info: unifi.0 (3696) Update done
2020-10-04 14:26:34.484 - info: unifi.0 (3696) Update done
2020-10-04 14:26:49.726 - info: text2command.0 (3670) processText: "🚪 Door unlock"
2020-10-04 14:26:49.730 - info: text2command.0 (3670) Control ID zigbee.0.000b57fffe59e847.lockState with : unlock
2020-10-04 14:26:49.796 - info: text2command.0 (3670) Response: wird aufgeschlossen
2020-10-04 14:27:04.168 - info: unifi.0 (3696) Update done
2020-10-04 14:27:34.763 - info: unifi.0 (3696) Update done
2020-10-04 14:27:47.530 - info: nut.0 (2451) Start NUT update
2020-10-04 14:27:47.581 - info: nut.0 (2451) All Nut values set
2020-10-04 14:28:04.831 - info: unifi.0 (3696) Update done
2020-10-04 14:28:34.208 - info: unifi.0 (3696) Update done
2020-10-04 14:29:04.238 - info: unifi.0 (3696) Update done
2020-10-04 14:29:34.677 - info: unifi.0 (3696) Update done
2020-10-04 14:29:50.880 - info: text2command.0 (3670) processText: "🚪 Door lock"
2020-10-04 14:29:50.881 - info: text2command.0 (3670) Control ID zigbee.0.000b57fffe59e847.lockState with : lock
2020-10-04 14:29:50.897 - info: text2command.0 (3670) Response: wird verschlossen
2020-10-04 14:30:00.048 - info: host.ioBroker-Pi4 instance system.adapter.ical.0 started with pid 22911
2020-10-04 14:30:02.264 - info: ical.0 (22911) starting. Version 1.7.4 in /opt/iobroker/node_modules/iobroker.ical, node: v12.18.4, js-controller: 3.1.6
2020-10-04 14:30:03.327 - info: ical.0 (22911) processing URL: Mein Kalendar https://calendar.google.com/calendar/ical/middrive1978%40googlemail.com/private-1fa08408e334c7194a1cc86982a246fa/basic.ics
2020-10-04 14:30:04.948 - info: unifi.0 (3696) Update done
2020-10-04 14:30:08.798 - info: ical.0 (22911) Terminated (NO_ERROR): Without reason
2020-10-04 14:30:09.324 - info: host.ioBroker-Pi4 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
2020-10-04 14:30:34.433 - info: unifi.0 (3696) Update done
2020-10-04 14:31:03.926 - info: unifi.0 (3696) Update done
2020-10-04 14:31:33.925 - info: unifi.0 (3696) Update done
2020-10-04 14:32:04.353 - info: unifi.0 (3696) Update done
2020-10-04 14:32:33.687 - info: unifi.0 (3696) Update done
2020-10-04 14:32:47.530 - info: nut.0 (2451) Start NUT update
2020-10-04 14:32:47.596 - info: nut.0 (2451) All Nut values set
2020-10-04 14:33:03.822 - info: unifi.0 (3696) Update done

kannst du das erste configure später ausführen lassen
nach dem alle clients da sind zum Beispiel

Asgothian

@Jan-Puchta Nein, kann ich nicht. Und auch beim 2. Neustart wird noch ein weiteres Configure versucht werden. Das ist nicht an ein festes Zeitraster gebunden.

ggf. kannst du durch schliessen / öffnen des Schlosses vom ioBroker aus ein Configure triggern.

Jan Puchta

@Asgothian

habe rausgefunden das das 2te configure nach dem ersten reboot von mir selber über die Entwickleroption ausgelöst wurde

wie du im log sehen kannst habe ich das schloss geöffnet und geschlossen wird auch ausgeführt nur der status ändert sich nicht und ein configure wird nicht getriggert

text2command.0	2020-10-04 14:29:50.897	info	(3670) Response: wird verschlossen
text2command.0	2020-10-04 14:29:50.881	info	(3670) Control ID zigbee.0.000b57fffe59e847.lockState with : lock
text2command.0	2020-10-04 14:29:50.880	info	(3670) processText: "🚪 Door lock"
unifi.0	2020-10-04 14:29:34.677	info	(3696) Update done
unifi.0	2020-10-04 14:29:04.238	info	(3696) Update done
unifi.0	2020-10-04 14:28:34.208	info	(3696) Update done
unifi.0	2020-10-04 14:28:04.831	info	(3696) Update done
nut.0	2020-10-04 14:27:47.581	info	(2451) All Nut values set
nut.0	2020-10-04 14:27:47.530	info	(2451) Start NUT update
unifi.0	2020-10-04 14:27:34.763	info	(3696) Update done
unifi.0	2020-10-04 14:27:04.168	info	(3696) Update done
text2command.0	2020-10-04 14:26:49.796	info	(3670) Response: wird aufgeschlossen
text2command.0	2020-10-04 14:26:49.730	info	(3670) Control ID zigbee.0.000b57fffe59e847.lockState with : unlock
text2command.0	2020-10-04 14:26:49.726	info	(3670) processText: "🚪 Door unlock"
unifi.0	2020-10-04 14:26:34.484	info	(3696) Update done

Jan Puchta

@Asgothian

also mit Entwickleroption kann ich das configure triggern
mit lock oder unlock nicht

Asgothian

@Jan-Puchta funktioniert denn das lock oder unlock ?

Jan Puchta

@Asgothian

ja lock und unlock funktionieren also schloss schließt und öffnet

Asgothian

@Jan-Puchta Aber die Meldungen vom Schloss kommen weiterhin nicht an, korrekt ?

Jan Puchta

@Asgothian

update nach mehreren probieren

nach einem neustart wird zwar ein configure getriggert (7) aber es failed (21)
danach wird kein neues getriggert

auch wird über unlock (27) oder lock (30) kein neues configure getriggert

wenn nach dem neustart über entwickler den status abfrage wird configure getriggert (34) und dann wird es auch über unlock (36,39) bzw lock (45,48)

2020-10-04 15:28:07.257 - info: zigbee.0 (3917) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-04 15:28:07.531 - info: zigbee.0 (3917) Starting Zigbee V3-BTZB hack...
2020-10-04 15:28:12.911 - info: zigbee.0 (3917) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-04 15:28:12.924 - info: zigbee.0 (3917) Unable to disable LED, unsupported function.
2020-10-04 15:28:12.925 - info: zigbee.0 (3917) --> transmitPower : high
2020-10-04 15:28:12.938 - info: zigbee.0 (3917) Currently 12 devices are joined:
2020-10-04 15:28:12.949 - info: zigbee.0 (3917) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 15:28:12.965 - info: zigbee.0 (3917) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-04 15:28:12.972 - info: zigbee.0 (3917) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.974 - info: zigbee.0 (3917) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.976 - info: zigbee.0 (3917) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.978 - info: zigbee.0 (3917) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 15:28:12.980 - info: zigbee.0 (3917) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.982 - info: zigbee.0 (3917) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.984 - info: zigbee.0 (3917) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.986 - info: zigbee.0 (3917) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 15:28:12.988 - info: zigbee.0 (3917) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.990 - info: zigbee.0 (3917) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.993 - info: zigbee.0 (3917) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-04 15:28:12.994 - info: zigbee.0 (3917) Zigbee started
2020-10-04 15:28:23.026 - error: zigbee.0 (3917) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35)
at listOnTimeout (internal/timers.js:549:17)
at processTimers (internal/timers.js:492:7))
2020-10-04 15:28:26.236 - info: unifi.0 (3670) Update done
2020-10-04 15:28:33.722 - info: unifi.0 (3670) Update done
2020-10-04 15:28:45.352 - info: text2command.0 (3644) processText: "🚪 Door unlock"
2020-10-04 15:28:45.355 - info: text2command.0 (3644) Control ID zigbee.0.000b57fffe59e847.lockState with : unlock
2020-10-04 15:28:45.390 - info: text2command.0 (3644) Response: wird aufgeschlossen
2020-10-04 15:29:01.071 - info: text2command.0 (3644) processText: "🚪 Door lock"
2020-10-04 15:29:01.072 - info: text2command.0 (3644) Control ID zigbee.0.000b57fffe59e847.lockState with : lock
2020-10-04 15:29:01.121 - info: text2command.0 (3644) Response: wird verschlossen
2020-10-04 15:29:04.437 - info: unifi.0 (3670) Update done
2020-10-04 15:29:15.068 - info: zigbee.0 (3917) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 15:29:20.096 - info: zigbee.0 (3917) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 15:29:24.220 - info: text2command.0 (3644) processText: "🚪 Door unlock"
2020-10-04 15:29:24.221 - info: text2command.0 (3644) Control ID zigbee.0.000b57fffe59e847.lockState with : unlock
2020-10-04 15:29:24.239 - info: text2command.0 (3644) Response: wird aufgeschlossen
2020-10-04 15:29:32.277 - info: zigbee.0 (3917) Configuring 0x000b57fffe59e847 V3-BTZB
............
2020-10-04 15:29:38.286 - info: zigbee.0 (3917) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 15:36:05.255 - info: unifi.0 (3670) Update done
2020-10-04 15:36:33.756 - info: unifi.0 (3670) Update done
2020-10-04 15:37:03.802 - info: unifi.0 (3670) Update done
2020-10-04 15:37:09.665 - info: text2command.0 (3644) processText: "🚪 Door lock"
2020-10-04 15:37:09.666 - info: text2command.0 (3644) Control ID zigbee.0.000b57fffe59e847.lockState with : lock
2020-10-04 15:37:09.684 - info: text2command.0 (3644) Response: wird verschlossen
2020-10-04 15:37:14.861 - info: zigbee.0 (3917) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 15:37:16.913 - info: nut.0 (2425) Start NUT update
2020-10-04 15:37:16.961 - info: nut.0 (2425) All Nut values set
2020-10-04 15:37:21.382 - info: zigbee.0 (3917) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB

Jan Puchta

@Asgothian

noch ein update

ungefähr eine halbe stunde nach dem reboot wurde automatisch ein configure getriggert

2020-10-04 15:28:07.257 - info: zigbee.0 (3917) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-04 15:28:07.531 - info: zigbee.0 (3917) Starting Zigbee V3-BTZB hack...
2020-10-04 15:28:12.911 - info: zigbee.0 (3917) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-04 15:28:12.924 - info: zigbee.0 (3917) Unable to disable LED, unsupported function.
2020-10-04 15:28:12.925 - info: zigbee.0 (3917) --> transmitPower : high
2020-10-04 15:28:12.938 - info: zigbee.0 (3917) Currently 12 devices are joined:
2020-10-04 15:28:12.949 - info: zigbee.0 (3917) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 15:28:12.965 - info: zigbee.0 (3917) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-04 15:28:12.972 - info: zigbee.0 (3917) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.974 - info: zigbee.0 (3917) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.976 - info: zigbee.0 (3917) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.978 - info: zigbee.0 (3917) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 15:28:12.980 - info: zigbee.0 (3917) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.982 - info: zigbee.0 (3917) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.984 - info: zigbee.0 (3917) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 15:28:12.986 - info: zigbee.0 (3917) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 15:28:12.988 - info: zigbee.0 (3917) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.990 - info: zigbee.0 (3917) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 15:28:12.993 - info: zigbee.0 (3917) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-04 15:28:12.994 - info: zigbee.0 (3917) Zigbee started
2020-10-04 15:28:23.026 - error: zigbee.0 (3917) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35)
at listOnTimeout (internal/timers.js:549:17)
at processTimers (internal/timers.js:492:7))
.........
zigbee.0	2020-10-04 16:02:25.936	info	(3917) Configuring 0x000b57fffe59e847 V3-BTZB
zigbee.0	2020-10-04 16:02:31.476	info	(3917) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB

Asgothian

@Jan-Puchta
Fein.. Jetzt die Schlüsselfrage: Kommen jetzt die Meldungen vom Schloss an wenn du am Schloss auf/zu schliesst ?

A.

Jan Puchta

@Asgothian

ja kommen sie

das das erste configure nach dem neustart nicht funktioniert wird das problem sein

ich starte noch einmal durch und mache garnichts
werde mal abwarten wann das erste funktionierende configure durchläuft

gebe es dann durch

Jan Puchta

@Asgothian

update

die zeit scheint für das erste funktionierende configure unterschiedlich zu sein
jetzt wurde nach 25 minuten nach dem neustart gleich dreimal das configure getriggert
nächstes configure wurde ca. 15 min später getriggert

also scheint es zu funktionieren leider halt nicht direkt nach dem neustart
werde meinen Neustart in eine Zeit verlegen wo kein kommen und gehen statt finden sollte

vielen Dank

2020-10-04 16:21:01.757 - info: zigbee.0 (4007) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-04 16:21:01.910 - info: zigbee.0 (4007) Starting Zigbee V3-BTZB hack...
2020-10-04 16:21:07.557 - info: zigbee.0 (4007) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-04 16:21:07.582 - info: zigbee.0 (4007) Unable to disable LED, unsupported function.
2020-10-04 16:21:07.583 - info: zigbee.0 (4007) --> transmitPower : high
2020-10-04 16:21:07.607 - info: zigbee.0 (4007) Currently 12 devices are joined:
2020-10-04 16:21:07.620 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:21:07.630 - info: zigbee.0 (4007) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-04 16:21:07.637 - info: zigbee.0 (4007) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.639 - info: zigbee.0 (4007) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.641 - info: zigbee.0 (4007) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.642 - info: zigbee.0 (4007) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 16:21:07.644 - info: zigbee.0 (4007) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.646 - info: zigbee.0 (4007) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.648 - info: zigbee.0 (4007) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.650 - info: zigbee.0 (4007) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 16:21:07.652 - info: zigbee.0 (4007) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.654 - info: zigbee.0 (4007) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.655 - info: zigbee.0 (4007) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-04 16:21:07.657 - info: zigbee.0 (4007) Zigbee started
2020-10-04 16:21:17.680 - error: zigbee.0 (4007) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35) at listOnTimeout (internal/timers.js:549:17) at processTimers (internal/timers.js:492:7))
............
2020-10-04 16:45:23.868 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:28.827 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:29.206 - info: unifi.0 (3755) Update done
2020-10-04 16:45:29.874 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:35.317 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:35.875 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:42.864 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:59.064 - info: unifi.0 (3755) Update done
.............
2020-10-04 17:02:25.762 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 17:02:30.754 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB

patrick039212

starte den adapter neu, neues log kommt dann morgen hatte leider ein kleines problem heute

Wenn ich die Tür öffne wird der Status derzeit im Iobroker geändert, über iobroker kann ich das schloss weder öffnen noch schließen

2020-10-04 21:14:24.892 - error: zigbee.0 (12413) Error on send command to 0x000b57fffe59e779. Error: Error: Command 0x000b57fffe59e779/1 closuresDoorLock.unlockDoor({"pincodevalue":""}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null}) failed (no response received)

patrick039212

@Asgothian
soeben getestet wieder die gleiche Fehlermeldung, Status ändert sich nur wenn ich die Tür selbst aufsperre via Iobroker passiert nichts keine Öffnung o.ä.

Log-File kann ich gegen 17 Uhr posten, kann die Logs nicht über iobroker.pro downloaden ...

Jan Puchta

@Asgothian

hallo und Entschuldigung wenn ich wieder nerve

leider war meine Freude von gestern zu früh

nach dem gestrigen Neustart wurde bis auf das erste configure ca. alle eine Stunde ein configure getriggert welches auch funktionerte (Success)
bis zum heutigen automatischen Reboot, da wurde leider kein configure ausgeführt,
auch keine 1h später
erst ca 2h später habe ich manuell über vpn wieder über Analyse den Status aktuallisiert und somit ein configure getriggert

kannst du mir sagen was ich bei blockly bzw. javascript eingeben muss damit ich das configure manuell triggern kann?

2020-10-04 16:21:01.757 - info: zigbee.0 (4007) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-04 16:21:01.910 - info: zigbee.0 (4007) Starting Zigbee V3-BTZB hack...
2020-10-04 16:21:07.557 - info: zigbee.0 (4007) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-04 16:21:07.582 - info: zigbee.0 (4007) Unable to disable LED, unsupported function.
2020-10-04 16:21:07.583 - info: zigbee.0 (4007) --> transmitPower : high
2020-10-04 16:21:07.607 - info: zigbee.0 (4007) Currently 12 devices are joined:
2020-10-04 16:21:07.620 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:21:07.630 - info: zigbee.0 (4007) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-04 16:21:07.637 - info: zigbee.0 (4007) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.639 - info: zigbee.0 (4007) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.641 - info: zigbee.0 (4007) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.642 - info: zigbee.0 (4007) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 16:21:07.644 - info: zigbee.0 (4007) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.646 - info: zigbee.0 (4007) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.648 - info: zigbee.0 (4007) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-04 16:21:07.650 - info: zigbee.0 (4007) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-04 16:21:07.652 - info: zigbee.0 (4007) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.654 - info: zigbee.0 (4007) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-04 16:21:07.655 - info: zigbee.0 (4007) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-04 16:21:07.657 - info: zigbee.0 (4007) Zigbee started
2020-10-04 16:21:17.680 - error: zigbee.0 (4007) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35) at listOnTimeout (internal/timers.js:549:17) at processTimers (internal/timers.js:492:7))
.............
2020-10-04 16:45:23.868 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:28.827 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
..............
2020-10-04 16:45:29.874 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:35.317 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:35.875 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 16:45:42.864 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.............
2020-10-04 17:02:25.762 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 17:02:30.754 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.............
2020-10-04 17:14:05.928 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 17:14:10.955 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.................
2020-10-04 18:14:05.212 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:14:10.232 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
................
2020-10-04 18:19:27.187 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:19:35.707 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:19:36.729 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:19:42.726 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...............
2020-10-04 18:26:59.387 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:27:05.906 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:27:22.444 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:27:28.963 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...............
2020-10-04 18:58:05.581 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:58:09.385 - info: javascript.0 (2140) script.js.Heimüberwachung_Alarmanlage_An_Aus: telegram: 
2020-10-04 18:58:11.597 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:58:27.606 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 18:58:33.186 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.............
2020-10-04 19:19:26.380 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 19:19:31.413 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
................
2020-10-04 19:58:26.814 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 19:58:31.840 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
................
2020-10-04 20:58:26.078 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 20:58:31.616 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...............
2020-10-04 21:58:25.359 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 21:58:30.889 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.............
2020-10-04 22:58:24.652 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 22:58:29.678 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...............
2020-10-04 23:58:23.963 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-04 23:58:28.996 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
..................
2020-10-05 00:58:23.279 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 00:58:28.309 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
..................
2020-10-05 01:58:22.648 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 01:58:27.668 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
..................
2020-10-05 02:58:21.994 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 02:58:27.012 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...........
2020-10-05 03:58:21.384 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 03:58:26.412 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...........
2020-10-05 04:58:20.790 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 04:58:25.821 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.............
2020-10-05 05:45:14.704 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 05:45:22.746 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
>>>>>manuell getriggert zum auf Arbeit gehen
2020-10-05 06:11:54.330 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 06:12:00.866 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
>>>>>>>>manuell getriggert Wohnung verlassen
2020-10-05 06:45:14.031 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 06:45:19.054 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.............
2020-10-05 07:11:53.641 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 07:11:58.667 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.................
2020-10-05 08:11:53.002 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 08:11:59.024 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
..................
2020-10-05 09:11:52.345 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 09:11:57.363 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
...............
2020-10-05 10:11:51.683 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 10:11:56.720 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.........
2020-10-05 11:11:51.028 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 11:11:56.081 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
..............
2020-10-05 12:11:50.350 - info: zigbee.0 (4007) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 12:11:55.373 - info: zigbee.0 (4007) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB
.....................
2020-10-05 13:02:38.820 - info: zigbee.0 (4009) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6
2020-10-05 13:02:38.974 - info: zigbee.0 (4009) Starting Zigbee V3-BTZB hack...
2020-10-05 13:02:44.116 - info: zigbee.0 (4009) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200805}}
2020-10-05 13:02:44.128 - info: zigbee.0 (4009) Unable to disable LED, unsupported function.
2020-10-05 13:02:44.129 - info: zigbee.0 (4009) --> transmitPower : high
2020-10-05 13:02:44.144 - info: zigbee.0 (4009) Currently 12 devices are joined:
2020-10-05 13:02:44.171 - info: zigbee.0 (4009) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 13:02:44.192 - info: zigbee.0 (4009) 0x00158d0001ffddcf (addr 46775): SPZB0001 - Eurotronic Spirit Zigbee wireless heater thermostat (EndDevice)
2020-10-05 13:02:44.203 - info: zigbee.0 (4009) 0x00158d000446fc53 (addr 57273): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-05 13:02:44.208 - info: zigbee.0 (4009) 0x00158d00044525e0 (addr 33793): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-05 13:02:44.210 - info: zigbee.0 (4009) 0x00158d000446fbbc (addr 35744): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-05 13:02:44.212 - info: zigbee.0 (4009) 0x00158d0002424ac2 (addr 43645): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-05 13:02:44.216 - info: zigbee.0 (4009) 0x00158d00044afaa9 (addr 45873): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-05 13:02:44.220 - info: zigbee.0 (4009) 0x00158d00044454bf (addr 39804): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-05 13:02:44.222 - info: zigbee.0 (4009) 0x00158d00044452b7 (addr 14820): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-10-05 13:02:44.225 - info: zigbee.0 (4009) 0x00158d00023ff955 (addr 17823): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-10-05 13:02:44.230 - info: zigbee.0 (4009) 0x00158d00041ce46e (addr 31466): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-05 13:02:44.232 - info: zigbee.0 (4009) 0x00158d0003f24814 (addr 58425): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-10-05 13:02:44.236 - info: zigbee.0 (4009) 0x000b57fffe59e847 (addr 17685): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-10-05 13:02:44.237 - info: zigbee.0 (4009) Zigbee started
2020-10-05 13:02:53.211 - info: unifi.0 (3760) Update done
2020-10-05 13:02:54.280 - error: zigbee.0 (4009) DeviceConfigure failed 0x000b57fffe59e847 V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe59e847/1 closuresDoorLock from '0x00124b001caaaad1/1' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35) at listOnTimeout (internal/timers.js:549:17) at processTimers (internal/timers.js:492:7))
.............................
2020-10-05 14:50:13.999 - info: zigbee.0 (4009) Configuring 0x000b57fffe59e847 V3-BTZB
2020-10-05 14:50:19.008 - info: zigbee.0 (4009) DeviceConfigure successful 0x000b57fffe59e847 V3-BTZB

lass dir Zeit mit antworten

NEWS

Zigbee-Adapter 1.0.2 Danalock

Support us

1.2k
Online

31.7k
Users

79.7k
Topics

1.3m
Posts

NEWS

Zigbee-Adapter 1.0.2 Danalock

Support us

1.2kOnline

31.7kUsers

79.7kTopics

1.3mPosts

1.2k
Online

31.7k
Users

79.7k
Topics

1.3m
Posts