Instanz MiHome wechselt Status ständig von grün auf gelb

Agria4800

So, und in der Zeit, wo ich den letzten Beitrag geschrieben habe wieder das klassisch alte Verhalten.... ohne das irgendwas geändert/verändert wurde...

mihome.3	2020-10-02 09:20:49.473	debug	(3676805) RAW: {"cmd":"read_ack","model":"switch","sid":"158d000401067f","short_id":51208,"data":{"voltage":3122}}
mihome.3	2020-10-02 09:20:49.473	debug	(3676805) data: 158d000401067f(switch): {"voltage":3.122,"percent":100}
mihome.3	2020-10-02 09:20:49.473	debug	(3676805) known device: 158d000401067f(switch)
mihome.3	2020-10-02 09:20:49.472	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d00042471cb","short_id":10924,"data":{"voltage":3005,"status":"unknown"}}
mihome.3	2020-10-02 09:20:49.472	debug	(3676805) data: 158d00042471cb(magnet): {"voltage":3.005,"percent":100}
mihome.3	2020-10-02 09:20:49.472	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_motion.aq2","sid":"158d000446685d","short_id":16930,"data":{"voltage":3005,"lux":"82"}}
mihome.3	2020-10-02 09:20:49.472	debug	(3676805) data: 158d000446685d(sensor_motion.aq2): {"voltage":3.005,"percent":100,"lux":82}
mihome.3	2020-10-02 09:20:49.472	debug	(3676805) known device: 158d000446685d(sensor_motion.aq2)
mihome.3	2020-10-02 09:20:49.471	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000252bef1","short_id":11604,"data":{"voltage":3025,"status":"close"}}
mihome.3	2020-10-02 09:20:49.471	debug	(3676805) data: 158d000252bef1(magnet): {"voltage":3.025,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:49.471	debug	(3676805) known device: 158d000252bef1(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:49.471	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000251f72f","short_id":59879,"data":{"voltage":3035,"status":"close"}}
mihome.3	2020-10-02 09:20:49.470	debug	(3676805) data: 158d000251f72f(magnet): {"voltage":3.035,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:49.469	debug	(3676805) known device: 158d000251f72f(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:49.466	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000251eb2a","short_id":4973,"data":{"voltage":3005,"status":"close"}}
mihome.3	2020-10-02 09:20:49.466	debug	(3676805) data: 158d000251eb2a(magnet): {"voltage":3.005,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:49.466	debug	(3676805) known device: 158d000251eb2a(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:49.465	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000252b2e2","short_id":44237,"data":{"voltage":2995,"status":"open"}}
mihome.3	2020-10-02 09:20:49.465	debug	(3676805) data: 158d000252b2e2(magnet): {"voltage":2.995,"percent":98.6,"state":true}
mihome.3	2020-10-02 09:20:49.465	debug	(3676805) known device: 158d000252b2e2(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:49.465	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b87cad","short_id":47081,"data":{"voltage":2845,"temperature":"1988","humidity":"6600","pressure":"97530"}}
mihome.3	2020-10-02 09:20:49.465	debug	(3676805) data: 158d0002b87cad(weather.v1): {"voltage":2.845,"percent":55.1,"temperature":19.88,"humidity":66,"pressure":975.3}
mihome.3	2020-10-02 09:20:49.465	debug	(3676805) known device: 158d0002b87cad(weather.v1)
mihome.3	2020-10-02 09:20:49.464	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b6dc62","short_id":44102,"data":{"voltage":2815,"temperature":"2127","humidity":"5678","pressure":"97540"}}
mihome.3	2020-10-02 09:20:49.464	debug	(3676805) data: 158d0002b6dc62(weather.v1): {"voltage":2.815,"percent":46.4,"temperature":21.27,"humidity":56.78,"pressure":975.4}
mihome.3	2020-10-02 09:20:49.464	debug	(3676805) known device: 158d0002b6dc62(weather.v1)
mihome.3	2020-10-02 09:20:49.464	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b87d72","short_id":45144,"data":{"voltage":2875,"temperature":"1959","humidity":"6280","pressure":"0"}}
mihome.3	2020-10-02 09:20:49.464	debug	(3676805) data: 158d0002b87d72(weather.v1): {"voltage":2.875,"percent":63.8,"temperature":19.59,"humidity":62.8}
mihome.3	2020-10-02 09:20:49.464	debug	(3676805) known device: 158d0002b87d72(weather.v1)
mihome.3	2020-10-02 09:20:49.463	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b6dc2d","short_id":59190,"data":{"voltage":3125,"temperature":"1160","humidity":"9627","pressure":"97540"}}
mihome.3	2020-10-02 09:20:49.463	debug	(3676805) data: 158d0002b6dc2d(weather.v1): {"voltage":3.125,"percent":100,"temperature":11.6,"humidity":96.27,"pressure":975.4}
mihome.3	2020-10-02 09:20:49.463	debug	(3676805) known device: 158d0002b6dc2d(weather.v1)
mihome.3	2020-10-02 09:20:49.462	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_cube.aqgl01","sid":"158d00027d8b14","short_id":5472,"data":{"voltage":3005}}
mihome.3	2020-10-02 09:20:49.462	debug	(3676805) data: 158d00027d8b14(cube): {"voltage":3.005,"percent":100}
mihome.3	2020-10-02 09:20:49.462	debug	(3676805) known device: 158d00027d8b14(sensor_cube.aqgl01)
mihome.3	2020-10-02 09:20:49.462	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_wleak.aq1","sid":"158d00024bfb42","short_id":40077,"data":{"voltage":3025}}
mihome.3	2020-10-02 09:20:49.462	debug	(3676805) data: 158d00024bfb42(sensor_wleak.aq1): {"voltage":3.025,"percent":100}
mihome.3	2020-10-02 09:20:49.461	debug	(3676805) known device: 158d00024bfb42(sensor_wleak.aq1)
mihome.3	2020-10-02 09:20:49.461	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d00042471cb","short_id":49264,"data":{"voltage":3015,"status":"close"}}
mihome.3	2020-10-02 09:20:49.461	debug	(3676805) data: 158d00042471cb(magnet): {"voltage":3.015,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:49.461	debug	(3676805) known device: 158d00042471cb(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:49.461	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b87d36","short_id":25591,"data":{"voltage":2805,"temperature":"2101","humidity":"5568","pressure":"97587"}}
mihome.3	2020-10-02 09:20:49.460	debug	(3676805) data: 158d0002b87d36(weather.v1): {"voltage":2.805,"percent":43.5,"temperature":21.01,"humidity":55.68,"pressure":975.87}
mihome.3	2020-10-02 09:20:49.460	debug	(3676805) known device: 158d0002b87d36(weather.v1)
mihome.3	2020-10-02 09:20:49.460	debug	(3676805) RAW: {"cmd":"read_ack","model":"gateway","sid":"7c49eb1da247","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}}
mihome.3	2020-10-02 09:20:49.460	debug	(3676805) data: 7c49eb1da247(gateway): {"proto_version":"1.1.2","illumination":1292,"connected":true,"on":false,"dimmer":0,"rgb":"#000000"}
mihome.3	2020-10-02 09:20:49.459	debug	(3676805) RAW: {"cmd":"read_ack","model":"gateway","sid":"04cf8c8fadb8","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}}
mihome.3	2020-10-02 09:20:49.459	debug	(3676805) data: 04cf8c8fadb8(gateway): {"proto_version":"1.1.2","illumination":1292,"connected":true,"on":false,"dimmer":0,"rgb":"#000000"}
mihome.3	2020-10-02 09:20:49.450	debug	(3676805) RAW: {"cmd":"get_id_list_ack","sid":"7c49eb1da247","token":"zSnIyuqIhdKIwQvW","data":["158d00042471cb"]}
mihome.3	2020-10-02 09:20:49.450	debug	(3676805) Send json: {"cmd":"read","sid":"158d00042471cb"}
mihome.3	2020-10-02 09:20:49.450	debug	(3676805) Send json: {"cmd":"read","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:20:49.450	debug	(3676805) RAW: {"cmd":"get_id_list_ack","sid":"04cf8c8fadb8","token":"gqVvTycer4iE9ZSx","data":["158d0002b87d36","158d00024bfb42","158d00027d8b14","158d0002b6dc2d","158d0002b87d72","158d0002b6dc62","1
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d000401067f"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d00042471cb"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d000446685d"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d000252bef1"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d000251f72f"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d000251eb2a"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d000252b2e2"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b87cad"}
mihome.3	2020-10-02 09:20:49.449	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b6dc62"}
mihome.3	2020-10-02 09:20:49.447	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b87d72"}
mihome.3	2020-10-02 09:20:49.447	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b6dc2d"}
mihome.3	2020-10-02 09:20:49.447	debug	(3676805) Send json: {"cmd":"read","sid":"158d00027d8b14"}
mihome.3	2020-10-02 09:20:49.447	debug	(3676805) Send json: {"cmd":"read","sid":"158d00024bfb42"}
mihome.3	2020-10-02 09:20:49.447	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b87d36"}
mihome.3	2020-10-02 09:20:49.447	debug	(3676805) Send json: {"cmd":"read","sid":"04cf8c8fadb8"}
mihome.3	2020-10-02 09:20:49.439	debug	(3676805) RAW: {"cmd":"iam","port":"9898","sid":"04cf8c8fadb8","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.44"}
mihome.3	2020-10-02 09:20:49.439	debug	(3676805) known device: 04cf8c8fadb8(gateway)
mihome.3	2020-10-02 09:20:49.439	debug	(3676805) sid : 04cf8c8fadb8 ip : 192.168.178.44
mihome.3	2020-10-02 09:20:49.439	debug	(3676805) Send json: {"cmd":"get_id_list","sid":"04cf8c8fadb8"}
mihome.3	2020-10-02 09:20:49.438	debug	(3676805) RAW: {"cmd":"iam","port":"9898","sid":"7c49eb1da247","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.139"}
mihome.3	2020-10-02 09:20:49.438	info	(3676805) Change connection status: true
mihome.3	2020-10-02 09:20:49.438	debug	(3676805) known device: 7c49eb1da247(gateway)
mihome.3	2020-10-02 09:20:49.438	debug	(3676805) sid : 7c49eb1da247 ip : 192.168.178.139
mihome.3	2020-10-02 09:20:49.438	debug	(3676805) Send json: {"cmd":"get_id_list","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:20:46.380	info	(3676805) Change connection status on timeout after 20000ms: false
mihome.3	2020-10-02 09:20:46.369	debug	(3676805) data: 7c49eb1da247(gateway): {"connected":false}
mihome.3	2020-10-02 09:20:46.355	debug	(3676805) data: 04cf8c8fadb8(gateway): {"connected":false}
mihome.3	2020-10-02 09:20:26.380	debug	(3676805) RAW: {"cmd":"read_ack","model":"switch","sid":"158d000401067f","short_id":51208,"data":{"voltage":3122}}
mihome.3	2020-10-02 09:20:26.379	debug	(3676805) data: 158d000401067f(switch): {"voltage":3.122,"percent":100}
mihome.3	2020-10-02 09:20:26.379	debug	(3676805) known device: 158d000401067f(switch)
mihome.3	2020-10-02 09:20:26.379	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d00042471cb","short_id":10924,"data":{"voltage":3005,"status":"unknown"}}
mihome.3	2020-10-02 09:20:26.378	debug	(3676805) data: 158d00042471cb(magnet): {"voltage":3.005,"percent":100}
mihome.3	2020-10-02 09:20:26.378	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_motion.aq2","sid":"158d000446685d","short_id":16930,"data":{"voltage":3005,"lux":"84"}}
mihome.3	2020-10-02 09:20:26.377	debug	(3676805) data: 158d000446685d(sensor_motion.aq2): {"voltage":3.005,"percent":100,"lux":84}
mihome.3	2020-10-02 09:20:26.377	debug	(3676805) known device: 158d000446685d(sensor_motion.aq2)
mihome.3	2020-10-02 09:20:26.377	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000252bef1","short_id":11604,"data":{"voltage":3025,"status":"close"}}
mihome.3	2020-10-02 09:20:26.376	debug	(3676805) data: 158d000252bef1(magnet): {"voltage":3.025,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:26.376	debug	(3676805) known device: 158d000252bef1(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:26.376	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000251f72f","short_id":59879,"data":{"voltage":3035,"status":"close"}}
mihome.3	2020-10-02 09:20:26.375	debug	(3676805) data: 158d000251f72f(magnet): {"voltage":3.035,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:26.375	debug	(3676805) known device: 158d000251f72f(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:26.375	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000251eb2a","short_id":4973,"data":{"voltage":3005,"status":"close"}}
mihome.3	2020-10-02 09:20:26.374	debug	(3676805) data: 158d000251eb2a(magnet): {"voltage":3.005,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:26.374	debug	(3676805) known device: 158d000251eb2a(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:26.374	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d00042471cb","short_id":49264,"data":{"voltage":3015,"status":"close"}}
mihome.3	2020-10-02 09:20:26.373	debug	(3676805) data: 158d00042471cb(magnet): {"voltage":3.015,"percent":100,"state":false}
mihome.3	2020-10-02 09:20:26.369	debug	(3676805) known device: 158d00042471cb(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:26.369	debug	(3676805) RAW: {"cmd":"read_ack","model":"gateway","sid":"7c49eb1da247","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}}
mihome.3	2020-10-02 09:20:26.368	debug	(3676805) data: 7c49eb1da247(gateway): {"proto_version":"1.1.2","illumination":1292,"connected":true,"on":false,"dimmer":0,"rgb":"#000000"}
mihome.3	2020-10-02 09:20:26.368	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d000252b2e2","short_id":44237,"data":{"voltage":2995,"status":"open"}}
mihome.3	2020-10-02 09:20:26.367	debug	(3676805) data: 158d000252b2e2(magnet): {"voltage":2.995,"percent":98.6,"state":true}
mihome.3	2020-10-02 09:20:26.367	debug	(3676805) known device: 158d000252b2e2(sensor_magnet.aq2)
mihome.3	2020-10-02 09:20:26.367	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b87cad","short_id":47081,"data":{"voltage":2845,"temperature":"1964","humidity":"5928","pressure":"0"}}
mihome.3	2020-10-02 09:20:26.364	debug	(3676805) data: 158d0002b87cad(weather.v1): {"voltage":2.845,"percent":55.1,"temperature":19.64,"humidity":59.28}
mihome.3	2020-10-02 09:20:26.363	debug	(3676805) known device: 158d0002b87cad(weather.v1)
mihome.3	2020-10-02 09:20:26.363	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b6dc62","short_id":44102,"data":{"voltage":2815,"temperature":"2127","humidity":"5678","pressure":"97540"}}
mihome.3	2020-10-02 09:20:26.362	debug	(3676805) data: 158d0002b6dc62(weather.v1): {"voltage":2.815,"percent":46.4,"temperature":21.27,"humidity":56.78,"pressure":975.4}
mihome.3	2020-10-02 09:20:26.362	debug	(3676805) known device: 158d0002b6dc62(weather.v1)
mihome.3	2020-10-02 09:20:26.361	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b87d72","short_id":45144,"data":{"voltage":2875,"temperature":"1959","humidity":"6280","pressure":"0"}}
mihome.3	2020-10-02 09:20:26.361	debug	(3676805) data: 158d0002b87d72(weather.v1): {"voltage":2.875,"percent":63.8,"temperature":19.59,"humidity":62.8}
mihome.3	2020-10-02 09:20:26.361	debug	(3676805) known device: 158d0002b87d72(weather.v1)
mihome.3	2020-10-02 09:20:26.360	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b6dc2d","short_id":59190,"data":{"voltage":3125,"temperature":"1050","humidity":"9815","pressure":"0"}}
mihome.3	2020-10-02 09:20:26.360	debug	(3676805) data: 158d0002b6dc2d(weather.v1): {"voltage":3.125,"percent":100,"temperature":10.5,"humidity":98.15}
mihome.3	2020-10-02 09:20:26.359	debug	(3676805) known device: 158d0002b6dc2d(weather.v1)
mihome.3	2020-10-02 09:20:26.359	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_cube.aqgl01","sid":"158d00027d8b14","short_id":5472,"data":{"voltage":3005}}
mihome.3	2020-10-02 09:20:26.358	debug	(3676805) data: 158d00027d8b14(cube): {"voltage":3.005,"percent":100}
mihome.3	2020-10-02 09:20:26.358	debug	(3676805) known device: 158d00027d8b14(sensor_cube.aqgl01)
mihome.3	2020-10-02 09:20:26.358	debug	(3676805) RAW: {"cmd":"read_ack","model":"sensor_wleak.aq1","sid":"158d00024bfb42","short_id":40077,"data":{"voltage":3025}}
mihome.3	2020-10-02 09:20:26.357	debug	(3676805) data: 158d00024bfb42(sensor_wleak.aq1): {"voltage":3.025,"percent":100}
mihome.3	2020-10-02 09:20:26.357	debug	(3676805) known device: 158d00024bfb42(sensor_wleak.aq1)
mihome.3	2020-10-02 09:20:26.357	debug	(3676805) RAW: {"cmd":"read_ack","model":"weather.v1","sid":"158d0002b87d36","short_id":25591,"data":{"voltage":2805,"temperature":"2101","humidity":"5568","pressure":"97587"}}
mihome.3	2020-10-02 09:20:26.356	debug	(3676805) data: 158d0002b87d36(weather.v1): {"voltage":2.805,"percent":43.5,"temperature":21.01,"humidity":55.68,"pressure":975.87}
mihome.3	2020-10-02 09:20:26.356	debug	(3676805) known device: 158d0002b87d36(weather.v1)
mihome.3	2020-10-02 09:20:26.356	debug	(3676805) RAW: {"cmd":"read_ack","model":"gateway","sid":"04cf8c8fadb8","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}}
mihome.3	2020-10-02 09:20:26.355	debug	(3676805) data: 04cf8c8fadb8(gateway): {"proto_version":"1.1.2","illumination":1292,"connected":true,"on":false,"dimmer":0,"rgb":"#000000"}
mihome.3	2020-10-02 09:20:26.339	debug	(3676805) RAW: {"cmd":"get_id_list_ack","sid":"7c49eb1da247","token":"D9qD0utJoG1u1wgc","data":["158d00042471cb"]}
mihome.3	2020-10-02 09:20:26.338	debug	(3676805) Send json: {"cmd":"read","sid":"158d00042471cb"}
mihome.3	2020-10-02 09:20:26.338	debug	(3676805) Send json: {"cmd":"read","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:20:26.333	debug	(3676805) RAW: {"cmd":"get_id_list_ack","sid":"04cf8c8fadb8","token":"Ky9rUl2dQ06MYMoT","data":["158d0002b87d36","158d00024bfb42","158d00027d8b14","158d0002b6dc2d","158d0002b87d72","158d0002b6dc62","
mihome.3	2020-10-02 09:20:26.332	debug	(3676805) Send json: {"cmd":"read","sid":"158d000401067f"}
mihome.3	2020-10-02 09:20:26.332	debug	(3676805) Send json: {"cmd":"read","sid":"158d00042471cb"}
mihome.3	2020-10-02 09:20:26.332	debug	(3676805) Send json: {"cmd":"read","sid":"158d000446685d"}
mihome.3	2020-10-02 09:20:26.331	debug	(3676805) Send json: {"cmd":"read","sid":"158d000252bef1"}
mihome.3	2020-10-02 09:20:26.331	debug	(3676805) Send json: {"cmd":"read","sid":"158d000251f72f"}
mihome.3	2020-10-02 09:20:26.331	debug	(3676805) Send json: {"cmd":"read","sid":"158d000251eb2a"}
mihome.3	2020-10-02 09:20:26.331	debug	(3676805) Send json: {"cmd":"read","sid":"158d000252b2e2"}
mihome.3	2020-10-02 09:20:26.330	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b87cad"}
mihome.3	2020-10-02 09:20:26.330	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b6dc62"}
mihome.3	2020-10-02 09:20:26.330	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b87d72"}
mihome.3	2020-10-02 09:20:26.329	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b6dc2d"}
mihome.3	2020-10-02 09:20:26.329	debug	(3676805) Send json: {"cmd":"read","sid":"158d00027d8b14"}
mihome.3	2020-10-02 09:20:26.329	debug	(3676805) Send json: {"cmd":"read","sid":"158d00024bfb42"}
mihome.3	2020-10-02 09:20:26.329	debug	(3676805) Send json: {"cmd":"read","sid":"158d0002b87d36"}
mihome.3	2020-10-02 09:20:26.328	debug	(3676805) Send json: {"cmd":"read","sid":"04cf8c8fadb8"}
mihome.3	2020-10-02 09:20:26.321	debug	(3676805) RAW: {"cmd":"iam","port":"9898","sid":"7c49eb1da247","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.139"}
mihome.3	2020-10-02 09:20:26.321	debug	(3676805) known device: 7c49eb1da247(gateway)
mihome.3	2020-10-02 09:20:26.321	debug	(3676805) sid : 7c49eb1da247 ip : 192.168.178.139
mihome.3	2020-10-02 09:20:26.320	debug	(3676805) Send json: {"cmd":"get_id_list","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:20:26.320	debug	(3676805) RAW: {"cmd":"iam","port":"9898","sid":"04cf8c8fadb8","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.44"}
mihome.3	2020-10-02 09:20:26.319	info	(3676805) Change connection status: true
mihome.3	2020-10-02 09:20:26.319	debug	(3676805) known device: 04cf8c8fadb8(gateway)
mihome.3	2020-10-02 09:20:26.319

Agria4800

und hier wieder das LOG, nachdem ich Gateway 1 rausgezogen habe.
Gateway 2 alleine in Betrieb, habe es sogar auch kurz vom Strom getrennt, aber kein Unterschied im Verhalten

Ist irgendwie ein klassisches Verbindungsproblem...

Hat dafür jemand eine Erklärung für solch ein Phänomen ?

Hier das LOG von Gateway2 alleine
analog dem Beispiel von hier
"Hier nur mal in der Instance 3 das zweite Gateway alleine ............ Beitrag weiter unten)"

mihome.3	2020-10-02 09:28:51.149	debug	(3690770) RAW: {"cmd":"iam","port":"9898","sid":"7c49eb1da247","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.139"}
mihome.3	2020-10-02 09:28:51.148	info	(3690770) Change connection status: true
mihome.3	2020-10-02 09:28:51.148	debug	(3690770) known device: 7c49eb1da247(gateway)
mihome.3	2020-10-02 09:28:51.148	debug	(3690770) sid : 7c49eb1da247 ip : 192.168.178.139
mihome.3	2020-10-02 09:28:51.147	debug	(3690770) Send json: {"cmd":"get_id_list","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:28:47.898	info	(3690770) Change connection status on timeout after 20000ms: false
mihome.3	2020-10-02 09:28:47.897	debug	(3690770) data: 7c49eb1da247(gateway): {"connected":false}
mihome.3	2020-10-02 09:28:27.898	debug	(3690770) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d00042471cb","short_id":49264,"data":{"voltage":3005,"status":"close"}}
mihome.3	2020-10-02 09:28:27.897	debug	(3690770) data: 158d00042471cb(magnet): {"voltage":3.005,"percent":100,"state":false}
mihome.3	2020-10-02 09:28:27.897	debug	(3690770) known device: 158d00042471cb(sensor_magnet.aq2)
mihome.3	2020-10-02 09:28:27.897	debug	(3690770) RAW: {"cmd":"read_ack","model":"gateway","sid":"7c49eb1da247","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}}
mihome.3	2020-10-02 09:28:27.897	debug	(3690770) data: 7c49eb1da247(gateway): {"proto_version":"1.1.2","illumination":1292,"connected":true,"on":false,"dimmer":0,"rgb":"#000000"}
mihome.3	2020-10-02 09:28:27.890	debug	(3690770) RAW: {"cmd":"get_id_list_ack","sid":"7c49eb1da247","token":"nRFnqnOgS5G0TXPT","data":["158d00042471cb"]}
mihome.3	2020-10-02 09:28:27.890	debug	(3690770) Send json: {"cmd":"read","sid":"158d00042471cb"}
mihome.3	2020-10-02 09:28:27.890	debug	(3690770) Send json: {"cmd":"read","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:28:27.883	debug	(3690770) RAW: {"cmd":"iam","port":"9898","sid":"7c49eb1da247","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.139"}
mihome.3	2020-10-02 09:28:27.883	info	(3690770) Change connection status: true
mihome.3	2020-10-02 09:28:27.883	debug	(3690770) known device: 7c49eb1da247(gateway)
mihome.3	2020-10-02 09:28:27.882	debug	(3690770) sid : 7c49eb1da247 ip : 192.168.178.139
mihome.3	2020-10-02 09:28:27.882	debug	(3690770) Send json: {"cmd":"get_id_list","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:28:24.860	info	(3690770) Change connection status on timeout after 20000ms: false
mihome.3	2020-10-02 09:28:24.859	debug	(3690770) data: 7c49eb1da247(gateway): {"connected":false}
mihome.3	2020-10-02 09:28:04.860	debug	(3690770) RAW: {"cmd":"read_ack","model":"sensor_magnet.aq2","sid":"158d00042471cb","short_id":49264,"data":{"voltage":3005,"status":"open"}}
mihome.3	2020-10-02 09:28:04.860	debug	(3690770) data: 158d00042471cb(magnet): {"voltage":3.005,"percent":100,"state":true}
mihome.3	2020-10-02 09:28:04.859	debug	(3690770) known device: 158d00042471cb(sensor_magnet.aq2)
mihome.3	2020-10-02 09:28:04.859	debug	(3690770) RAW: {"cmd":"read_ack","model":"gateway","sid":"7c49eb1da247","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}}
mihome.3	2020-10-02 09:28:04.858	debug	(3690770) data: 7c49eb1da247(gateway): {"proto_version":"1.1.2","illumination":1292,"connected":true,"on":false,"dimmer":0,"rgb":"#000000"}
mihome.3	2020-10-02 09:28:04.849	debug	(3690770) RAW: {"cmd":"get_id_list_ack","sid":"7c49eb1da247","token":"IckE5j9z50tdITR6","data":["158d00042471cb"]}
mihome.3	2020-10-02 09:28:04.848	debug	(3690770) Send json: {"cmd":"read","sid":"158d00042471cb"}
mihome.3	2020-10-02 09:28:04.848	debug	(3690770) Send json: {"cmd":"read","sid":"7c49eb1da247"}
mihome.3	2020-10-02 09:28:04.842	debug	(3690770) RAW: {"cmd":"iam","port":"9898","sid":"7c49eb1da247","model":"gateway","proto_version":"1.1.2","ip":"192.168.178.139"}
mihome.3	2020-10-02 09:28:04.841	info	(3690770) Change connection status: true
mihome.3	2020-10-02 09:28:04.841	debug	(3690770) known device: 7c49eb1da247(gateway)
mihome.3	202

Thomas Braun

@Agria4800
In allen logs steht nichts verwertbares drin.

Agria4800

@Thomas-Braun was genau meinst du damit ?
Mehr geht nicht, ist debug mode

Thomas Braun

@Agria4800 Ich meine, das es keine Hinweise gibt, warum die Geräte in ein timeout laufen.
Ich vermute da irgendwas 'krummes' in deinem (WLAN)-Netzwerk.

Agria4800

@Thomas-Braun
und ihr sieht man, wenn es funktioniert steht: cmd: heartbeat

mihome.3	2020-10-02 09:02:42.952	debug	(3676805) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"dV0szronSXiBL7Al","data":{"ip":"192.168.178.139"}}
mihome.3	2020-10-02 09:02:32.918	debug	(3676805) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"aNUGREd0WjrreuxU","data":{"ip":"192.168.178.139"}}
mihome.3	2020-10-02 09:02:22.985	debug	(3676805) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"Bz54k600RCtQrzff","data":{"ip":"192.168.178.139"}

geht es nicht, steht folgendes: read

020-10-02 09:28:04.859	debug	(3690770) RAW: {"cmd":"read_ack","model":"gateway","sid":"7c49eb1da247","short_id":0,"data":{"rgb":0,"illumination":1292,"proto_version":"1.1.2"}

Agria4800

@Thomas-Braun ja, da gebe ich dir recht, ich denke auch, das es nur noch was mit meinem Netzwerk zu tun haben kann.
Ich habe eine Fritzbox 7590 und lasse 2,4Ghz und 5Ghz getrennt laufen, alle Mihome laufen logo auf 2,4Ghz. WLAN hat super Signal, eigentlich alles 1a...

crunchip

@Agria4800 Wlan hätte ich auch im Verdacht, vllt mal auf nen anderen Kanal wechseln. Üblicherweise sind ja Kanal 1,6 und 11 die üblichen Kanäle, bei mir half auf Kanal 4 zu stellen
desweiteren würde ich den Key notieren, Adapter mal komplett löschen und neu installieren, danach erst mal nur eines der Gateways eintragen

Thomas Braun

@Agria4800
Verschlüsselung auf 'WPA2 only'?
Schalt mal zum Testen das 5GHz-Netz aus. Ich würde das 2,4GHz-Netz so simpel wie möglich konfigurieren.
Meine Netze stehen auf 'automatische Kanalwahl'.

Agria4800

@Thomas-Braun ich habe WPA + WPA 2 drin stehen,
werde das später testen und mal nur auf 2,4Ghz laufen lassen... mal sehen, habe aber irgendwie aus dem Bauch heraus wenig Hoffnung.
Analog dazu werde ich auch nochmal den Adapter löschen, neu booten und neu installieren...
(Ich meine aber, das ich das schon gemacht hatte)
Melde mich wieder mit neuen Erkenntnissen

Thomas Braun

@Agria4800
Hast du Geräte die nur WPA können? Ansonsten würde ich bei WLAN immer alles unnötige Ausschalten. Auch z. B. den WLAN-Standard 802.11B nicht aktivieren, wenn der nicht benötigt wird.

Agria4800

@Thomas-Braun ich bin leider kein Experte, daher weiß ich leider nicht, welche Geräte nur WPA mögen...
Ich habe das 2,4GHz nur für Smart Home Devices + Kameras, Handys, Computer und restliches auf 5Ghz.
Ich habe aktuell bei 2,4Ghz auf kanal 5 manuell gestellt, Verschlüsselung von WPA+WPA2 auf WPA umgestellt und
folgende Einstellung noch in der Fritzbox:
Bildschirmfoto 2020-10-02 um 15.28.11.png
Aktuell scheint es gerade zu gehen...
Parallel habe ich noch einen 2ten Nuc laufen, der eigentlich mein Testsystem ist und der schon mehr als ein Jahr unverändert ist. Da schein es auch zu laufen... mal sehen, wie es in 30 min. ist...

Beide Gateway sind eingebunden

NUC1:

mihome.3	2020-10-02 15:30:15.167	debug	(3841145) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"CSDUkUyYQD0MLZSI","data":{"ip":"192.168.178.139"}}
mihome.3	2020-10-02 15:30:14.553	debug	(3841145) RAW: {"cmd":"heartbeat","model":"gateway","sid":"04cf8c8fadb8","short_id":"0","token":"sGj8QORfnlkO77bD","data":{"ip":"192.168.178.44"}}
mihome.3	2020-10-02 15:30:05.133	debug	(3841145) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"YpMVxRxQ7Om8QGfl","data":{"ip":"192.168.178.139"}}
mihome.3	2020-10-02 15:30:04.620	debug	(3841145) RAW: {"cmd":"heartbeat","model":"gateway","sid":"04cf8c8fadb8","short_id":"0","token":"lYZKW4jxoqMcMyQN","data":{"ip":"192.168.178.44"}}
mihome.3	2020-10-02 15:29:55.199	debug	(3841145) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"iUyWRswihDk3Xvls","data":{"ip":"192.168.178.139"}}
mihome.3	2020-10-02 15:29:54.688	debug	(3841145) RAW: {"cmd":"heartbeat","model":"gateway","sid":"04cf8c8fadb8","short_id":"0","token":"PlpJmEXyupeQF4Ap","data":{"ip":"192.168.178.44"}}
mihome.3	2020-10-02 15:29:45.164	debug

NUC2:

mihome.0	2020-10-02 15:29:25.180	debug	(2105345) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"ecmTjzhsuXwlUSiu","data":{"ip":"192.168.178.139"}}
mihome.0	2020-10-02 15:29:24.670	debug	(2105345) RAW: {"cmd":"heartbeat","model":"gateway","sid":"04cf8c8fadb8","short_id":"0","token":"Oo7iqOYjOPsEGkmG","data":{"ip":"192.168.178.44"}}
mihome.0	2020-10-02 15:29:15.247	debug	(2105345) RAW: {"cmd":"heartbeat","model":"gateway","sid":"7c49eb1da247","short_id":"0","token":"fZ9nM1G2StcGyDUZ","data":{"ip":"192.168.178.139"}}
mihome.0	2020-10-02 15:29:14.735	debug	(2105345) RAW: {"cmd":"heartbeat","model":"gateway","sid":"04cf8c8fadb8","short_id":"0","token":"n7AKyG3oisow1Med","data":{"ip":"192.168.178.44"}}
mihome.0	2020-10-02 15:29:13.097	debug	(2105345) RAW: {"cmd":"report","model":"sensor_motion.aq2","sid":"158d000446685d","short_id":16930,"data":{"no_motion":"180"}}

Thomas Braun

@Agria4800
Wenn da mehrere WLANs rumfunken würde die Koexistenz noch aktivieren.
Kanalwahl würde ich auf automatisch setzen.
Und ob WPA benötigt wird siehst du ja, wenn es mal testweise ausgeschaltet wird.

Agria4800

@Thomas-Braun Autokanal aktiviert, Adapter bleibt grün, aber die Gateways verlieren die Verbindung, Kanal 4 --> Adapter und Gateways dauerhaft verbunden...
So scheint es zu laufen...
Bildschirmfoto 2020-10-02 um 16.08.22.png
Werde beobachten und heute abend Rückmeldung geben..
Danke euch beiden für die Tipps und für´s dranbleiben an meinem Problem

Tim 0

Hallo Leute,

bevor ich ein neues Thema eröffne, kapere ich dieses hier erstmal. Hffe das ist im Sinne des Erstellers. = )

Ich möchte das Mihome Gateway (Version 2) als Nachtlicht und Alarm nutzen. Und schon beim Nachtlcht hakt es...
So sieht die Zeitschlatung aus:
Um 19.33 Uhr geht das Licht an; jeden Tag. Soweit funzt es auch.

Um 0.33 Uhr (beispielhaft) soll es ausgeschaltet werden.
Zwei Bausteine sind deaktiviert, weil "Light = unwahr" zum Ausschalten ausreicht.

Problem:
Das Licht geht immer vor 0.33 Uhr aus. Meist schon immerhalb der 90 oder 60 Minuten nach Anschalten.
Das tritt unabhängig davon auf, ob das Gerät direkt neben dem Router in der Steckdose seckt oder einen Raum weiter.
Die IP Adresse ist fest zugewiesen durch die Fritzbox.

Ich habe keine Ahnung woran es liegt.
Hier noch ein Ausschnitt von der einzigen Meldung des mihome Adapters:
Die "change connection status" Meldungen sind unabhängig vom Ein - und Ausschalten des Lichtes. Also die erscheinen auch so mal zwischendurch den ganzen Tag über.

Hier die Einstellungen des Adapters:
(dabei ist es egal, ob "auf allen Adressen" oder nur auf der zugewiesenen IP Adressen "gehört" wird.

Bei gleichem Problem geht´s hier weiter:
https://forum.iobroker.net/topic/41500/mihome-gateway-zeitplan-trigger-funktioniert-nicht

Habt ihr zufälligerweise eine Idee woran es liegen könnte?
Tante EDIT: - Gibt es eine Möglichkeit mitzuloggen, wann das Licht ausgeht?

Vielen Dank.
Einen schönen Abend.

MfG Tim

Thomas Braun

@tim-0 Und wo ist jetzt der Bezug zum Thema? Mach einen eigenen Thread mit deinem Blockly-Logik-Problem auf.

NEWS

Instanz MiHome wechselt Status ständig von grün auf gelb

Support us

659
Online

31.2k
Users

78.6k
Topics

1.3m
Posts

NEWS

Instanz MiHome wechselt Status ständig von grün auf gelb

Support us

659Online

31.2kUsers

78.6kTopics

1.3mPosts

659
Online

31.2k
Users

78.6k
Topics

1.3m
Posts