INFO / ACHTUNG : Zwave-Adapter

fisch

Hallo zusammen,

habe heute den 1.5.0 insatlliert...jetzt geht wieder nichts

$ ./iobroker add zwave  --host ioBroker-Pi
host.ioBroker-Pi install adapter zwave
npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.zwave"
find: ‘/tmp/systemd-private-e840114d2b404515948665fe563358d5-redis-server.service-S60QFf’: Keine Berechtigungfind: ‘/tmp/systemd-private-e840114d2b404515948665fe563358d5-colord.service-o5xroB’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   125    0   125    0     0    362      0 --:--:-- --:--:-- --:--:--   363

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file master.zip: Keine Berechtigung

  0 12.5M    0  1370    0     0   1615      0  2:16:13 --:--:--  2:16:13 12685
curl: (23) Failed writing body (0 != 1370)

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: curl -L -O https://github.com/OpenZWave/open-zwave/archive/master.zip
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   125    0   125    0     0    362      0 --:--:-- --:--:-- --:--:--   363

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file master.zip: Keine Berechtigung

  0 12.5M    0  1370    0     0   1615      0  2:16:13 --:--:--  2:16:13 12685
curl: (23) Failed writing body (0 != 1370)

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:147:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:776:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm
 
ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! iobroker.zwave@1.5.0 preinstall: `node lib/preinstall.js`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the iobroker.zwave@1.5.0 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm WARN Local package.json exists, but node_modules missing, did you mean to install?
npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-07-12T13_49_56_096Z-debug.log

ERROR: fs.js:114    throw err;
    ^

Error: EACCES: permission denied, open '/opt/iobroker/node_modules/iobroker.zwave/iob_npm.done'
    at Object.openSync (fs.js:443:3)
    at Object.writeFileSync (fs.js:1194:35)
    at ChildProcess.child.on (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2946:20)
    at ChildProcess.emit (events.js:198:13)
    at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)

ERROR: process exited with code 1

Kann mir jemand weiterhelfen?

habe schon iobroker del zwave gemacht und neuinstalliert... und dann über Admin eine neue Instanz installieren wollen

fisch

ok installiert habe ich ihn nun bekommen....

host.ioBroker-Pi	2019-07-12 16:51:28.841	error	instance system.adapter.zwave.0 terminated with code 0 (OK)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Module._compile (internal/modules/cjs/loader.js:776:30)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/lib/openzwave-shared.js:27:19)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Module.require (internal/modules/cjs/loader.js:690:17)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:805:18)
Caught	2019-07-12 16:51:28.839	error	by controller[0]: Error: libopenzwave.so.1.6: cannot open shared object file: No such file or directory

EDIT: OK, ich habe wieder die 1.4.2 installiert...geht wieder?!
Mit der 1.5.0 gehts leider nicht!

fisch

Erledigt:

mit

sudo ldconfig

läuft es nun !°

gery80

Hallo versuche gerade zwave adapter zu installieren leider funktioniert es nicht image ist das neue ioBroker Image für Raspberry Pi2/3/4 Buster mit piVCCU 20190723 bitte um hilfe

$ ./iobroker add zwave  --host IOBroker
NPM version: 6.9.0
npm install iobroker.zwave@1.4.2 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-systemd-timesyncd.service-fwIlBw’: Keine Berechtigungfind: ‘/tmp/pivccu-var/empty’: Keine Berechtigung
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-redis-server.service-prEu7C’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   122    0   122    0     0    231      0 --:--:-- --:--:-- --:--:--   231

  0 1917k    0   733    0     0    698      0  0:46:53  0:00:01  0:46:52   698
 49 1917k   49  942k    0     0   426k      0  0:00:04  0:00:02  0:00:02  811k
100 1917k  100 1917k    0     0   830k      0  0:00:02  0:00:02 --:--:-- 1521k

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   147    0   147    0     0    281      0 --:--:-- --:--:-- --:--:--   281

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 16081    0 16081    0     0  12958      0 --:--:--  0:00:01 --:--:-- 40506

/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: cd open-zwave-1.4 && make && sudo make install
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:154:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm
 WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! iobroker.zwave@1.4.2 preinstall: `node lib/preinstall.js`npm 
ERR! Exit status 1npm ERR! 
npm ERR! Failed at the iobroker.zwave@1.4.2 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.


npm ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2019-08-14T19_44_00_445Z-debug.log

host.IOBroker install adapter zwave
NPM version: 6.9.0
npm install iobroker.zwave@1.4.2 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-systemd-timesyncd.service-fwIlBw’: Keine Berechtigungfind: ‘/tmp/pivccu-var/empty’: Keine Berechtigung
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-redis-server.service-prEu7C’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   122    0   122    0     0    243      0 --:--:-- --:--:-- --:--:--   242

  1 1917k    1 39004    0     0  34486      0  0:00:56  0:00:01  0:00:55 34486
100 1917k  100 1917k    0     0   952k      0  0:00:02  0:00:02 --:--:-- 2131k

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   147    0   147    0     0    280      0 --:--:-- --:--:-- --:--:--   280

100 16026    0 16026    0     0  13501      0 --:--:--  0:00:01 --:--:-- 13501
100 16081    0 16081    0     0  13536      0 --:--:--  0:00:01 --:--:-- 55000

/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: cd open-zwave-1.4 && make && sudo make install
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:154:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm
 WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! iobroker.zwave@1.4.2 preinstall: `node lib/preinstall.js`npm ERR! Exit status 1
npm 
ERR! npm ERR! Failed at the iobroker.zwave@1.4.2 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.


npm ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2019-08-14T19_47_05_108Z-debug.log

host.IOBroker install adapter zwave
NPM version: 6.9.0
npm install iobroker.zwave@1.4.2 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-systemd-timesyncd.service-fwIlBw’: Keine Berechtigungfind: ‘/tmp/pivccu-var/empty’: Keine Berechtigung
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-redis-server.service-prEu7C’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   122    0   122    0     0    223      0 --:--:-- --:--:-- --:--:--   223

  4 1917k    4 95062    0     0  64274      0  0:00:30  0:00:01  0:00:29 64274
 55 1917k   55 1065k    0     0   435k      0  0:00:04  0:00:02  0:00:02 1004k
100 1917k  100 1917k    0     0   626k      0  0:00:03  0:00:03 --:--:-- 1153k

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   147    0   147    0     0    231      0 --:--:-- --:--:-- --:--:--   231

100 16081    0 16081    0     0  11502      0 --:--:--  0:00:01 --:--:-- 11502

/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: cd open-zwave-1.4 && make && sudo make install
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:154:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! iobroker.zwave@1.4.2 preinstall: `node lib/preinstall.js`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the iobroker.zwave@1.4.2 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-14T19_50_10_182Z-debug.log

host.IOBroker install adapter zwave
ERROR: host.IOBroker Cannot install zwave
ERROR: process exited with code 13

arteck

@gery80
welche version versuchst du zu installieren ???

AlCalzone

@arteck Laut Log 1.4.2, welche OZW 1.4 mitbringt.

@gery80 kannst du mal probieren, die Version 1.5.1 zu installieren?

cd /opt/iobroker
npm i iobroker.zwave
iobroker upload zwave

gery80

@AlCalzone Hallo zwave wurde installiert jedoch bei iobroker upload zwave sagt er mir es wurde nicht gefunden

+ iobroker.zwave@1.5.1
added 2 packages from 29 contributors and audited 1926 packages in 1571.599s
found 39 vulnerabilities (28 low, 11 high)
  run `npm audit fix` to fix them, or `npm audit` for details
pi@IOBroker:/opt/iobroker $ iobroker upload zwave
got /opt/iobroker/node_modules/iobroker.zwave/admin
upload [15] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/zwave.png zwave.png image/png
upload [14] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/words.js words.js application/javascript
upload [13] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/js/comClasses.js js/comClasses.js application/javascript
upload [12] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/index.html index.html text/html
upload [11] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/soft-reset.png img/soft-reset.png image/png
upload [10] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/sleepOn.png img/sleepOn.png image/png
upload [9] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/sleep.png img/sleep.png image/png
upload [8] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/readyOn.png img/readyOn.png image/png
upload [7] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/ready.png img/ready.png image/png
upload [6] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/neighbors.png img/neighbors.png image/png
upload [5] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/heal.png img/heal.png image/png
upload [4] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/hard-reset.png img/hard-reset.png image/png
upload [3] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/delete.png img/delete.png image/png
upload [2] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/aliveOn.png img/aliveOn.png image/png
upload [1] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/alive.png img/alive.png image/png
upload [0] zwave.admin /opt/iobroker/node_modules/iobroker.zwave/admin/img/add.png img/add.png image/png
system.adapter.zwave does not exist

AlCalzone

@gery80 Alles gut, dann musst du im Admin noch eine Instanz hinzufügen.

gery80

@AlCalzone kannst du mir das bitte erklären wie ich die Instanz hinzufüge ich bring es einfach nicht zusammen danke

AlCalzone

@gery80 Dann empfehle ich die Doku zu lesen:
https://www.iobroker.net/#de/documentation/tutorial/adapter.md

gery80

danke hat funktioniert

fisch

hi @all

kann mir jemand sagen was das genau beduetet?

Inkludieren klappt ohne Probleme aber, sobald ich schalten will kommt das:

zwave.0	2019-08-15 21:01:41.841	debug	node3: timeout
zwave.0	2019-08-15 21:01:31.841	debug	node3: timeout
zwave.0	2019-08-15 21:01:21.840	debug	node3: timeout
zwave.0	2019-08-15 21:01:18.294	debug	system.adapter.admin.0: logging true
zwave.0	2019-08-15 21:01:13.925	debug	setState for: nodeID=3: comClass=98: index=0: instance=1: value=true
zwave.0	2019-08-15 21:01:13.925	debug	stateChange zwave.0.NODE3.DOOR_LOCK.Locked_1 set {"val":true,"ack":false,"ts":1565895673921,"q":0,"from":"system.adapter.node-red.0","user":"system.user.admin","lc":1565895673700}
zwave.0	2019-08-15 21:01:13.782	debug	setState for: nodeID=3: comClass=98: index=0: instance=1: value=true
zwave.0	2019-08-15 21:01:13.782	debug	stateChange zwave.0.NODE3.DOOR_LOCK.Locked_1 set {"val":true,"ack":false,"ts":1565895673779,"q":0,"from":"system.adapter.node-red.0","user":"system.user.admin","lc":1565895673700}
zwave.0	2019-08-15 21:01:13.705	debug	setState for: nodeID=3: comClass=98: index=0: instance=1: value=true
zwave.0	2019-08-15 21:01:13.704	debug	stateChange zwave.0.NODE3.DOOR_LOCK.Locked_1 set {"val":true,"ack":false,"ts":1565895673700,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1565895673700}
zwave.0	2019-08-15 21:01:11.839	debug	setState for: nodeID=3: comClass=98: index=0: instance=1: value=false
zwave.0	2019-08-15 21:01:11.838	debug	stateChange zwave.0.NODE3.DOOR_LOCK.Locked_1 set {"val":false,"ack":false,"ts":1565895671836,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1565891882149}
zwave.0	2019-08-15 21:01:09.012	debug	system.adapter.admin.0: logging false
zwave.0	2019-08-15 21:00:44.352	debug	system.adapter.admin.0: logging true
zwave.0	2019-08-15 20:59:55.980	debug	fixing zwave buttons to use common.role "switch" instead of "button"
zwave.0	2019-08-15 20:59:55.976	info	Scan completed
zwave.0	2019-08-15 20:59:55.970	info	Update zwave.0.NODE3
zwave.0	2019-08-15 20:59:55.970	info	node ready nodeID: 3, nodeInfo: {"manufacturer":"Poly-control","manufacturerid":"0x010e","product":"Danalock V3 BTZE","producttype":"0x0009","productid":"0x0001","type":"Door Lock Keypad","name":"","
zwave.0	2019-08-15 20:59:55.969	debug

arteck

@fisch sagte in INFO / ACHTUNG : Zwave-Adapter:

NODE3

scheint nicht erreichbar zu sein

snador

Wie ist denn so der allgemeine Stand des Adapters. Ich frage weil mich das Thema Central Scene interessiert und mein NodOn Octane noch nicht funktioniert... Kommt da was oder sollte schon gehen?

Danke für die Info!

Micha

Schließe mich dem Vorredner mal an.
Die zwave Installation schlägt fehl auf einen Raspberry 4 mit dem iobroker Image pi_vccu 20190723_buster.

Gibt es dafür schon eine Lösung?
@AlCalzone

Edit
Fehlermeldung beim hinzufügen der Instanz

$ ./iobroker add zwave --host raspberrypi
host.raspberrypi install adapter zwave
npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.zwave"
npm

WARN
checkPermissions
Missing write access to /opt/iobroker/node_modules/iobroker.zwave
npm
ERR! path
/opt/iobroker/node_modules/iobroker.zwavenpm ERR! code
EACCESnpm ERR!
errno -13npm ERR!
syscall access
npm
ERR! Error: EACCES: permission denied, access '/opt/iobroker/node_modules/iobroker.zwave'npm ERR! { [Error: EACCES: permission denied, access '/opt/iobroker/node_modules/iobroker.zwave']
npm ERR! stack:
npm ERR!
'Error: EACCES: permission denied, access '/opt/iobroker/node_modules/iobroker.zwave'',npm ERR! errno: -13,
npm ERR! code: 'EACCES',
npm ERR! syscall: 'access',
npm ERR! path: '/opt/iobroker/node_modules/iobroker.zwave' }
npm ERR!
npm ERR! The operation was rejected by your operating system.
npm ERR! It is likely you do not have the permissions to access this file as the current user
npm ERR!
npm ERR! If you believe this might be a permissions issue, please double-check the
npm ERR! permissions of the file and its containing directories, or try running
npm
ERR! the command again as root/Administrator (though this is not recommended).

npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2019-09-16T19_50_09_155Z-debug.log

Cannot install iobroker.zwave: 243
ERROR: process exited with code 25

VG Micha

eumats

Mit „permission denied“ steht doch um Log schon ziemlich genau was nicht stimmt...
Mein Vorschlag: Den Fixer laufen lassen (wenn unbekannt, dann Forumsuche) und noch mal versuchen...

cburghardt

@snador Central Scene wird mittlerweile von openzwave vernünftig unterstützt. Ob es auch mit dem Adapter funktioniert, werde ich demnächst mal testen.

Micha

@eumats said in INFO / ACHTUNG : Zwave-Adapter:

Mit „permission denied“ steht doch um Log schon ziemlich genau was nicht stimmt...
Mein Vorschlag: Den Fixer laufen lassen (wenn unbekannt, dann Forumsuche) und noch mal versuchen...

Vielen Dank für den Suchvorschlag.
Ich habe sowohl den fix durchgeführt als auch das Forum durchsucht. Das es hier was mit den Rechten zu tun hat sehe ich auch.
Selbst wenn ich den Befehl in der Konsole als Admin eingebe kommt der gleiche Fehler.

Grundsätzlich geht es hier um ein Installationsproblem unter Buster.
Wie oben empfohlen habe ich den zwave per
npm i iobroker.zwave installiert und dann mit
Iobroker upload zwave eingespielt.
Dann auch den npm audit fix ausgeführt und über das UI dann die Instanz installieren wollen.
Laut Anzeige ist zwave auch installiert aber keine Instanz.

Iobroker add zwave bringt auch nichts außer den Fehler.

VG Micha

AlCalzone

@Micha npm audit fix != fixer
Führe den fixer nochmal aus und probiere dann eine Instanz hinzuzufügen.

Micha

Hallo @AlCalzone ,
leider führt auch dieser Weg nicht zu dem gewünschten Erfolg.
Habe nochmals ein frisches Image genommen und wollte den Zwave Adapter installieren.
Die Installation auf der UI von Iobroker endet mit folgenden Fehler.

Fertig mit Fehler: fs.js:114 throw err; ^ Error: ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.zwave/iob_npm.done' at Object.openSync (fs.js:443:3) at Object.writeFileSync (fs.js:1194:35) at ChildProcess.child.on (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2938:20) at ChildProcess.emit (events.js:198:13) at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)

der Fixer endet mit folgenden Fehler.

pi@raspberrypi:/opt/iobroker $ sudo npm audit fix != fixer
npm ERR! code ELOCKVERIFY
npm ERR! Errors were found in your package-lock.json, run npm install to fix them.
npm ERR! Missing: iobroker.b-control-em@^0.2.1
npm ERR! Missing: iobroker.node-red@^1.9.0

npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2019-09-29T11_47_52_769Z-debug.log

Komme da irgendwie nicht weiter.
auf dem Raspi 3B läuft der Adapter.
Hast du noch ne Idee für mich ?

VG Micha

NEWS

INFO / ACHTUNG : Zwave-Adapter

Support us

540
Online

31.7k
Users

79.9k
Topics

1.3m
Posts

NEWS

INFO / ACHTUNG : Zwave-Adapter

Support us

540Online

31.7kUsers

79.9kTopics

1.3mPosts

540
Online

31.7k
Users

79.9k
Topics

1.3m
Posts