ioBroker.js-controller 1.5.6

[sigi234]

@Bluefox said in ioBroker.js-controller 1.5.4:

npm i iobroker.js-controller@1.5.4
iobroker restart

Ok, teste ich gleich...

Alle Adapter Grün......Windows 10 System!

[Segway]

@Bluefox said in ioBroker.js-controller 1.5.4:

Besonders beachten auf:

Wo war noch mal dein Beitrag was ich beachten muss beim Upgrade des controllers auf die neue Version ? Ich finde den Beitrag grad nicht mehr

[Bluefox]

@Segway Aktuell gibt es nur ein Beitrag diesbezüglich: https://forum.iobroker.net/topic/19834/iobroker-js-controller-1-5-4/1

[Segway]

mhhhh ... dann vertausche ich das wohl mit einem anderen Adapter, der auch als Testphase gepostet wurde und wo man gewisse Dinge beachten musste......vielleicht habe ich aber auch einfach nur zu viel Bier getrunken

[sigi234]

@Bluefox said in ioBroker.js-controller 1.5.4:

vis Empty ID Problem

Ja, besteht noch immer:

[Bluefox]

@sigi234 Schade

[sigi234]

@Bluefox said in ioBroker.js-controller 1.5.4:

@sigi234 Schade

ich gehe wieder auf 1.4.2 zurück....

Funktioniert wieder, keine Empty ID

[Bluefox]

Ich konnte Empty ID error lokalisieren und bei mir beheben.

Bitte noch mal ausprobieren:

cd /optOderHomeVerzeichnis/iobroker
npm i iobroker.js-controller@1.5.5
iobroker restart

[Issi]

@Bluefox kann ich bestätigen ist bei mir auch behoben
TOP Danke dir

[sigi234]

@Bluefox said in ioBroker.js-controller 1.5.4:

Ich konnte Empty ID error lokalisieren und bei mir beheben.

Bitte noch mal ausprobieren:

cd /optOderHomeVerzeichnis/iobroker
npm i iobroker.js-controller@1.5.5
iobroker restart

Yes........ Fehler weg!

[e-i-k-e]

Auf einen ioBroker Slave mit 1.5.5 habe ich den Javascript Adapter nicht auf grün bekommen.
Nach einem downgrade auf 1.4.2 wurde dieser sofort weider grün.

[Marty56]

Hab es mal versucht, sieht nicht so gut aus.

root@ioBroker-OPi2E:~# iobroker stop
Stopping iobroker controller daemon...
iobroker controller daemon stopped.
Exit code for "killall.sh": 0
root@ioBroker-OPi2E:~# cd ..
root@ioBroker-OPi2E:/# cd opt
root@ioBroker-OPi2E:/opt# cd iobroker
root@ioBroker-OPi2E:/opt/iobroker# npm i iobroker.js-controller@1.5.5
npm WARN lifecycle iobroker.js-controller@1.5.5~preinstall: cannot run in wd %s %s (wd=%s) iobroker.js-controller@1.5.5 node lib/preinstallCheck.js /opt/iobroker/node_modules/.staging/iobroker.js-controller-a76002ca

> authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/authenticate-pam/build'
  CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o
../authenticate_pam.cc:30:31: fatal error: security/pam_appl.h: No such file or directory
compilation terminated.
authenticate_pam.target.mk:92: recipe for target 'Release/obj.target/authenticate_pam/authenticate_pam.o' failed
make: *** [Release/obj.target/authenticate_pam/authenticate_pam.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/authenticate-pam/build'
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:23)
gyp ERR! stack     at emitTwo (events.js:106:13)
gyp ERR! stack     at ChildProcess.emit (events.js:191:7)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:219:12)
gyp ERR! System Linux 4.14.70-sunxi
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v6.14.4
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok 

> ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
> node rebuild.js


> diskusage@0.2.6 install /opt/iobroker/node_modules/diskusage
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
  CXX(target) Release/obj.target/diskusage/src/main.o
  CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
  SOLINK_MODULE(target) Release/obj.target/diskusage.node
  COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

> iobroker.js-controller@1.5.5 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first


> rsa-compat@1.9.2 postinstall /opt/iobroker/node_modules/acme-v2/node_modules/rsa-compat
> node lib/telemetry.js event:install


> rsa-compat@1.9.2 postinstall /opt/iobroker/node_modules/greenlock/node_modules/rsa-compat
> node lib/telemetry.js event:install

- asn1js@1.2.12 node_modules/asn1js
- buffer-v6-polyfill@1.0.5 node_modules/buffer-v6-polyfill
- node.extend@1.1.6 node_modules/certpem/node_modules/node.extend
cliui@4.1.0 node_modules/iobroker.js-controller/node_modules/cliui -> node_modules/cliui
- node.extend@1.1.6 node_modules/greenlock/node_modules/node.extend
- arraybuffer.slice@0.0.7 node_modules/iobroker.js-controller/node_modules/arraybuffer.slice
- camelcase@4.1.0 node_modules/iobroker.js-controller/node_modules/camelcase
- component-emitter@1.2.1 node_modules/iobroker.js-controller/node_modules/component-emitter
- debug@3.1.0 node_modules/iobroker.js-controller/node_modules/debug
- engine.io-parser@2.1.2 node_modules/iobroker.js-controller/node_modules/engine.io-parser
- isarray@2.0.1 node_modules/iobroker.js-controller/node_modules/isarray
- socket.io-adapter@1.1.1 node_modules/iobroker.js-controller/node_modules/socket.io-adapter
- socket.io-parser@3.2.0 node_modules/iobroker.js-controller/node_modules/socket.io-parser
- ultron@1.1.1 node_modules/iobroker.js-controller/node_modules/ultron
- ws@3.3.3 node_modules/iobroker.js-controller/node_modules/ws
- engine.io@3.2.0 node_modules/iobroker.js-controller/node_modules/engine.io
- xmlhttprequest-ssl@1.5.5 node_modules/iobroker.js-controller/node_modules/xmlhttprequest-ssl
- engine.io-client@3.2.1 node_modules/iobroker.js-controller/node_modules/engine.io-client
- socket.io-client@2.1.1 node_modules/iobroker.js-controller/node_modules/socket.io-client
- socket.io@2.1.1 node_modules/iobroker.js-controller/node_modules/socket.io
- yargs-parser@9.0.2 node_modules/iobroker.js-controller/node_modules/yargs/node_modules/yargs-parser
- pkijs@1.3.33 node_modules/pkijs
- certpem@1.0.1 node_modules/certpem
- glob@7.1.2 node_modules/rimraf/node_modules/glob
- bindings@1.1.1 node_modules/unix-dgram/node_modules/bindings
- yargs-parser@4.2.1 node_modules/iobroker.js-controller/node_modules/yargs-parser
yargs@11.1.0 node_modules/iobroker.js-controller/node_modules/yargs -> node_modules/yargs
iobroker@1.0.0 /opt/iobroker
└─┬ iobroker.js-controller@1.5.5 
  ├─┬ diskusage@0.2.6 
  │ └── nan@2.12.1 
  ├─┬ greenlock@2.6.7 
  │ ├── acme@1.2.0 
  │ ├─┬ acme-v2@1.5.2 
  │ │ └─┬ rsa-compat@1.9.2 
  │ │   └── node-forge@0.7.6 
  │ ├── cert-info@1.5.0 
  │ ├── le-store-certbot@2.2.1 
  │ └─┬ rsa-compat@1.9.2 
  │   ├── node-forge@0.7.6 
  │   └─┬ ursa-optional@0.9.10 
  │     ├─┬ bindings@1.4.0 
  │     │ └── file-uri-to-path@1.0.0 
  │     └── nan@2.12.1 
  ├─┬ jsonwebtoken@8.4.0 
  │ └─┬ jws@3.2.1 
  │   └── jwa@1.2.0 
  ├─┬ jszip@3.1.5
  │ └── pako@1.0.8 
  ├── le-acme-core@2.1.4 
  ├── le-sni-auto@2.1.6 
  ├─┬ loadavg-windows@1.0.2 
  │ └── weak-daemon@1.0.3 
  ├─┬ node-schedule@1.3.1 
  │ └─┬ cron-parser@2.7.3 
  │   └── moment-timezone@0.5.23 
  ├─┬ node.extend@2.0.2 
  │ ├── has@1.0.3 
  │ └── is@3.3.0 
  ├─┬ pidusage@2.0.17 
  │ └── safe-buffer@5.1.2 
  ├─┬ prompt@1.0.0
  │ └─┬ utile@0.3.0
  │   └─┬ rimraf@2.6.3 
  │     └── glob@7.1.3 
  ├── pyconf@1.1.6 
  ├─┬ redis@2.8.0
  │ └── redis-commands@1.4.0 
  ├── safe-replace@1.1.0 
  ├─┬ tar@4.4.8 
  │ ├── chownr@1.1.1 
  │ ├── minipass@2.3.5 
  │ ├── minizlib@1.2.1 
  │ └── yallist@3.0.3 
  └── winston@2.4.4 

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@^1.0.0 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.javascript/node_modules/mymodule/package.json'
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 (node_modules/authenticate-pam):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

[Marty56]

Zu meinem Erstaunen konnte ich iobroker starten und das UI und auch VIS scheint zu funktionieren.

[Bluefox]

@Marty56 said in ioBroker.js-controller 1.5.4:

Hab es mal versucht, sieht nicht so gut aus.

root@ioBroker-OPi2E:~# iobroker stop
Stopping iobroker controller daemon...
iobroker controller daemon stopped.
Exit code for "killall.sh": 0
root@ioBroker-OPi2E:~# cd ..
root@ioBroker-OPi2E:/# cd opt
root@ioBroker-OPi2E:/opt# cd iobroker
root@ioBroker-OPi2E:/opt/iobroker# npm i iobroker.js-controller@1.5.5
npm WARN lifecycle iobroker.js-controller@1.5.5~preinstall: cannot run in wd %s %s (wd=%s) iobroker.js-controller@1.5.5 node lib/preinstallCheck.js /opt/iobroker/node_modules/.staging/iobroker.js-controller-a76002ca

> authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/authenticate-pam/build'
  CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o
../authenticate_pam.cc:30:31: fatal error: security/pam_appl.h: No such file or directory
compilation terminated.
authenticate_pam.target.mk:92: recipe for target 'Release/obj.target/authenticate_pam/authenticate_pam.o' failed
make: *** [Release/obj.target/authenticate_pam/authenticate_pam.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/authenticate-pam/build'
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:23)
gyp ERR! stack     at emitTwo (events.js:106:13)
gyp ERR! stack     at ChildProcess.emit (events.js:191:7)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:219:12)
gyp ERR! System Linux 4.14.70-sunxi
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v6.14.4
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok 

> ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
> node rebuild.js


> diskusage@0.2.6 install /opt/iobroker/node_modules/diskusage
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
  CXX(target) Release/obj.target/diskusage/src/main.o
  CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
  SOLINK_MODULE(target) Release/obj.target/diskusage.node
  COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

> iobroker.js-controller@1.5.5 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first


> rsa-compat@1.9.2 postinstall /opt/iobroker/node_modules/acme-v2/node_modules/rsa-compat
> node lib/telemetry.js event:install


> rsa-compat@1.9.2 postinstall /opt/iobroker/node_modules/greenlock/node_modules/rsa-compat
> node lib/telemetry.js event:install

- asn1js@1.2.12 node_modules/asn1js
- buffer-v6-polyfill@1.0.5 node_modules/buffer-v6-polyfill
- node.extend@1.1.6 node_modules/certpem/node_modules/node.extend
cliui@4.1.0 node_modules/iobroker.js-controller/node_modules/cliui -> node_modules/cliui
- node.extend@1.1.6 node_modules/greenlock/node_modules/node.extend
- arraybuffer.slice@0.0.7 node_modules/iobroker.js-controller/node_modules/arraybuffer.slice
- camelcase@4.1.0 node_modules/iobroker.js-controller/node_modules/camelcase
- component-emitter@1.2.1 node_modules/iobroker.js-controller/node_modules/component-emitter
- debug@3.1.0 node_modules/iobroker.js-controller/node_modules/debug
- engine.io-parser@2.1.2 node_modules/iobroker.js-controller/node_modules/engine.io-parser
- isarray@2.0.1 node_modules/iobroker.js-controller/node_modules/isarray
- socket.io-adapter@1.1.1 node_modules/iobroker.js-controller/node_modules/socket.io-adapter
- socket.io-parser@3.2.0 node_modules/iobroker.js-controller/node_modules/socket.io-parser
- ultron@1.1.1 node_modules/iobroker.js-controller/node_modules/ultron
- ws@3.3.3 node_modules/iobroker.js-controller/node_modules/ws
- engine.io@3.2.0 node_modules/iobroker.js-controller/node_modules/engine.io
- xmlhttprequest-ssl@1.5.5 node_modules/iobroker.js-controller/node_modules/xmlhttprequest-ssl
- engine.io-client@3.2.1 node_modules/iobroker.js-controller/node_modules/engine.io-client
- socket.io-client@2.1.1 node_modules/iobroker.js-controller/node_modules/socket.io-client
- socket.io@2.1.1 node_modules/iobroker.js-controller/node_modules/socket.io
- yargs-parser@9.0.2 node_modules/iobroker.js-controller/node_modules/yargs/node_modules/yargs-parser
- pkijs@1.3.33 node_modules/pkijs
- certpem@1.0.1 node_modules/certpem
- glob@7.1.2 node_modules/rimraf/node_modules/glob
- bindings@1.1.1 node_modules/unix-dgram/node_modules/bindings
- yargs-parser@4.2.1 node_modules/iobroker.js-controller/node_modules/yargs-parser
yargs@11.1.0 node_modules/iobroker.js-controller/node_modules/yargs -> node_modules/yargs
iobroker@1.0.0 /opt/iobroker
└─┬ iobroker.js-controller@1.5.5 
  ├─┬ diskusage@0.2.6 
  │ └── nan@2.12.1 
  ├─┬ greenlock@2.6.7 
  │ ├── acme@1.2.0 
  │ ├─┬ acme-v2@1.5.2 
  │ │ └─┬ rsa-compat@1.9.2 
  │ │   └── node-forge@0.7.6 
  │ ├── cert-info@1.5.0 
  │ ├── le-store-certbot@2.2.1 
  │ └─┬ rsa-compat@1.9.2 
  │   ├── node-forge@0.7.6 
  │   └─┬ ursa-optional@0.9.10 
  │     ├─┬ bindings@1.4.0 
  │     │ └── file-uri-to-path@1.0.0 
  │     └── nan@2.12.1 
  ├─┬ jsonwebtoken@8.4.0 
  │ └─┬ jws@3.2.1 
  │   └── jwa@1.2.0 
  ├─┬ jszip@3.1.5
  │ └── pako@1.0.8 
  ├── le-acme-core@2.1.4 
  ├── le-sni-auto@2.1.6 
  ├─┬ loadavg-windows@1.0.2 
  │ └── weak-daemon@1.0.3 
  ├─┬ node-schedule@1.3.1 
  │ └─┬ cron-parser@2.7.3 
  │   └── moment-timezone@0.5.23 
  ├─┬ node.extend@2.0.2 
  │ ├── has@1.0.3 
  │ └── is@3.3.0 
  ├─┬ pidusage@2.0.17 
  │ └── safe-buffer@5.1.2 
  ├─┬ prompt@1.0.0
  │ └─┬ utile@0.3.0
  │   └─┬ rimraf@2.6.3 
  │     └── glob@7.1.3 
  ├── pyconf@1.1.6 
  ├─┬ redis@2.8.0
  │ └── redis-commands@1.4.0 
  ├── safe-replace@1.1.0 
  ├─┬ tar@4.4.8 
  │ ├── chownr@1.1.1 
  │ ├── minipass@2.3.5 
  │ ├── minizlib@1.2.1 
  │ └── yallist@3.0.3 
  └── winston@2.4.4 

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@^1.0.0 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.javascript/node_modules/mymodule/package.json'
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 (node_modules/authenticate-pam):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

Es sind nur Warnungen.

[Bluefox]

@e-i-k-e said in ioBroker.js-controller 1.5.4:

Auf einen ioBroker Slave mit 1.5.5 habe ich den Javascript Adapter nicht auf grün bekommen.
Nach einem downgrade auf 1.4.2 wurde dieser sofort weider grün.

Ich brauche logs, so kann ich nicht mal vermuten, was nicht ging

[Marty56]

Es scheint alles zu laufen.
Scheinbar habe ich noch irgendwo einen undefinierten State, der vorher aber nicht bemerkt wurde.
Jetzt bekomme ich eine minütliche Fehlermeldung

javascript.0	2019-02-13 07:48:00.596	error	Error in callback: TypeError: Cannot read property 'common' of undefined

Ich habe schon alle Scripts durchgesucht, ob ich irgendwo einen Minuten Timer habe. Aber ich habe leider nach 30 Minuten Suche nichts gefunden.

[Marty56]

Ich konnte es jetzt einkreisen.

javascript.0	2019-02-13 07:56:00.209	error	Error in callback: TypeError: Cannot read property 'common' of undefined
javascript.0	2019-02-13 07:55:38.422	error	Error in callback: TypeError: Cannot read property 'common' of undefined
javascript.0	2019-02-13 07:55:38.248	error	TypeError: Cannot read property 'common' of undefined
javascript.0	2019-02-13 07:55:38.248	error	^
javascript.0	2019-02-13 07:55:38.247	error	if (!language || !dayOfWeeksFull[language]) language = objects['system.config'].common.language;
javascript.0	2019-02-13 07:55:38.247	error	script.js.common.Tagescharacteristik: /opt/iobroker/node_modules/iobroker.javascript/javascript.js:2712

Es ist das Kommando formatDate(new Date(), "W hh:mm").

Liegt nicht an meinen Scripts sondern wohl an der neuen js-controller Version

Was funktioniert ist: formatDate(new Date(), "hh:mm")
update:

• WW, НН(cyrillic) - full week day as text
• W, Н(cyrillic) - short week day as text

funktionieren alle nicht mehr

[Bluefox]

@Marty56 was für JS Version hast du?

[Marty56]

@Bluefox javascript 3.6.4
Ich habe alles sonst auf default als repro.
Also die Versionen, die unter http://download.iobroker.net/sources-dist.json liegen

[apollon77]

@Marty56 Hier wäre (rechtebedingt) noch ein --unsafe-perm anzuhängen, aber das preinstall script ist bei nem update nicht so nötig, also alles ok ie BF schon gesagt hat