Upnp v0.3.6
-
Schade, aber ich habe jetzt kapituliert, da ich keine Ursache für das Nichtfüllen der Datenpunkte finde.
Hab auch gerade ein neues Update der Firmware der Fritzbox gemach, ich denke an der Box liegt es nicht.
Vielleicht liegt das doch irgendwie an Trixie Lite - ich steck da nicht so tief drin.Hat nicht irgend jemand den Adapter in der gleichen Kofiguration am Laufen?
Fritzbox 5690 pro und unter Trixie Lite mit node.js 22.22.1 und js-controller 7.0.7. -
@Kanumouse 1.1.9 installiert. Alles von 1.1.1 bis 1.1.8 hat mit der Fritzbox nichtbfunktioniert, weil ich viele veraltete Pakete ersetzt habe und da an manchen stellen sich mehr geändert hatte.
-
Wenn ich die Instanz laufen lassen, kommt jetzt immer der Fehler "upnp.0 2026-04-09 10:51:04.811 error Error processing task firstDevLookup: Task firstDevLookup timed out after 30000ms".
@Kanumouse Die Meldung an sich sagt nur das er ein Gerät nicht lesen kann, liegt vermutlich daran das es den UPnP Standard nicht ganz einhält. Sollte aber keine weitere Auswirkungen auf die Funktion vom Adapter haben, außer das dieses Gerät halt nicht im Adapter angelegt wird.
-
@Kanumouse Die Meldung an sich sagt nur das er ein Gerät nicht lesen kann, liegt vermutlich daran das es den UPnP Standard nicht ganz einhält. Sollte aber keine weitere Auswirkungen auf die Funktion vom Adapter haben, außer das dieses Gerät halt nicht im Adapter angelegt wird.
-
@Jey-Cee
Kann ich noch etwas dazu beitragen, um die Ursache für die nichtfunktionierende Instanz im Zusammenhang mit meiner Konfiguration zu finden?@Kanumouse Nach deiner Schilderung tritt das Problem ja nur mit der Fritzbox auf und nicht mit anderen Geräten bzw. ich weiß gar nicht ob du es mit anderen Geräten probiert hast.
Es scheint auch kein generelles Problem mit der Fritzbox zu sein, da ich von einem anderen User die Meldung bekommen habe, dass bei ihm auch Datenpunkte nicht abgerufen werden konnten mit der neuen Version ab 1.1.1 und nachdem ich das Update raus gebracht habe 1.1.9 hat bei ihm das mit der Fritzbox funktioniert.Du könntest mal iob diag starten und den Output hier posten, vielleicht bringt uns das weiter.
-
@Kanumouse Nach deiner Schilderung tritt das Problem ja nur mit der Fritzbox auf und nicht mit anderen Geräten bzw. ich weiß gar nicht ob du es mit anderen Geräten probiert hast.
Es scheint auch kein generelles Problem mit der Fritzbox zu sein, da ich von einem anderen User die Meldung bekommen habe, dass bei ihm auch Datenpunkte nicht abgerufen werden konnten mit der neuen Version ab 1.1.1 und nachdem ich das Update raus gebracht habe 1.1.9 hat bei ihm das mit der Fritzbox funktioniert.Du könntest mal iob diag starten und den Output hier posten, vielleicht bringt uns das weiter.
@Jey-Cee
Ok, ich habe mal ein "iob diag" angestossen. Vielleicht erkennst du dort was.========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: TrixiePI Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 10:32:20 up 49 min, 1 user, load average: 2.08, 1.20, 1.23 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sat 2026-04-11 10:32:21 CEST Universal time: Sat 2026-04-11 08:32:21 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/pi GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.6G 100M 1.7M 322M 341M Swap: 4.1G 1.5G 2.6G Total: 8.1G 5.2G 2.7G Active iob-Instances: 47 3795 M total memory 3470 M used memory 1535 M active memory 1574 M inactive memory 95 M free memory 27 M buffer memory 279 M swap cache 3945 M total swap 1452 M used swap 2493 M free swap *** top - Table Of Processes *** top - 10:32:22 up 49 min, 1 user, load average: 2.08, 1.20, 1.23 Tasks: 237 total, 1 running, 236 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.6 us, 3.1 sy, 0.0 ni, 89.1 id, 6.2 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.7 total, 94.8 free, 3470.8 used, 308.0 buff/cache MiB Swap: 3945.5 total, 2493.1 free, 1452.4 used. 324.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 760M 9.3M 750M 2% /run /dev/sda2 ext4 917G 11G 870G 2% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 1.9G 2.9M 1.9G 1% /tmp /dev/sda1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 380M 12K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Apr 11 09:43:08 2026] EXT4-fs (sda2): orphan cleanup on readonly fs [Sat Apr 11 09:43:08 2026] EXT4-fs (sda2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none. [Sat Apr 11 09:43:11 2026] EXT4-fs (sda2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 522M /var/cache 516M /var/cache/apt 383M /var/cache/apt/archives 254M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 231M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 569M /opt/iobroker/iobroker-data/history 458M /opt/iobroker/iobroker-data/files 205M /opt/iobroker/iobroker-data/backup-objects 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 101M /opt/iobroker/iobroker-data/states.jsonl 59M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 9.3M /opt/iobroker/iobroker-data/files/vis.0/main/vis-views.json 9.2M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ESERA-Automation_eBus_Coupler_12001_AL4XV0Y6-if00-port0 *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: TrixiePI TrixiePI (version: 7.0.7, hostname: TrixiePI , alive, uptime: 2929) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 9 +-- iobroker.bosch-ebike@0.1.12 (git+ssh://git@github.com/TA2k/ioBroker.bosch-ebike.git#71ad7a8139a8af772f671e9c37eddf2ad064c69e) +-- iobroker.fritzdect@2.6.3 (git+ssh://git@github.com/foxthefox/ioBroker.fritzdect.git#52438d65d7835107260cdbbbc4f05b98c96fbc64) +-- iobroker.husqvarna-automower@0.6.0-beta.12 (git+ssh://git@github.com/ice987987/ioBroker.husqvarna-automower.git#0426d3f29db494dbd0c67591e8b830bb8c813c6e) +-- iobroker.icons-open-icon-library-png@0.1.3 (git+ssh://git@github.com/ioBroker/ioBroker.icons-open-icon-library-png.git#0847a79d713ee6725ccb6ccfb044c025b73ec946) +-- iobroker.nina@0.0.26 (git+ssh://git@github.com/TA2k/ioBroker.nina.git#99d491a973e79ab12f86aa961414be4249cfd2dc) +-- iobroker.tuya@3.17.0 (git+ssh://git@github.com/Apollon77/ioBroker.tuya.git#640df7360a877f37764a31d628e4d6de3ed1f6e3) +-- iobroker.upnp@1.1.9 (git+ssh://git@github.com/Jey-Cee/ioBroker.upnp.git#c1123f0773152804375ffc0ed44216986194c4d0) +-- iobroker.vis-materialdesign@0.5.94 (git+ssh://git@github.com/Scrounger/ioBroker.vis-materialdesign.git#8b7529d493f223dfc4f1d1f632553fcb35bbcc92) +-- iobroker.vis-players@0.1.7 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.vis-players.git#36cf4f56da3ffea9a10ca948e289e3293ab8f547) Adapter State + system.adapter.admin.0 : admin : TrixiePI - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : TrixiePI - enabled system.adapter.alias-manager.0 : alias-manager : TrixiePI - disabled + system.adapter.backitup.0 : backitup : TrixiePI - enabled + system.adapter.bosch-ebike.0 : bosch-ebike : TrixiePI - enabled + system.adapter.bydhvs.0 : bydhvs : TrixiePI - enabled + system.adapter.daswetter.0 : daswetter : TrixiePI - enabled system.adapter.dwd.0 : dwd : TrixiePI - enabled + system.adapter.ebus.0 : ebus : TrixiePI - enabled + system.adapter.email.0 : email : TrixiePI - enabled system.adapter.feiertage.0 : feiertage : TrixiePI - enabled system.adapter.flot.0 : flot : TrixiePI - disabled + system.adapter.fritzbox.0 : fritzbox : TrixiePI - enabled + system.adapter.fritzdect.0 : fritzdect : TrixiePI - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : TrixiePI - enabled + system.adapter.history.0 : history : TrixiePI - enabled + system.adapter.hm-rega.0 : hm-rega : TrixiePI - enabled + system.adapter.hm-rpc.0 : hm-rpc : TrixiePI - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : TrixiePI - enabled, port: 12001 + system.adapter.hm-rpc.2 : hm-rpc : TrixiePI - enabled, port: 12010 + system.adapter.hm-rpc.3 : hm-rpc : TrixiePI - enabled, port: 12001 system.adapter.husqvarna-automower.0 : husqvarna-automower : TrixiePI - disabled system.adapter.ical.0 : ical : TrixiePI - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: TrixiePI - disabled system.adapter.icons-icons8.0 : icons-icons8 : TrixiePI - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : TrixiePI - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : TrixiePI - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: TrixiePI - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : TrixiePI - disabled + system.adapter.influxdb.0 : influxdb : TrixiePI - enabled, port: 8086 + system.adapter.iot.0 : iot : TrixiePI - enabled + system.adapter.javascript.0 : javascript : TrixiePI - enabled + system.adapter.logparser.0 : logparser : TrixiePI - enabled + system.adapter.modbus.0 : modbus : TrixiePI - enabled + system.adapter.mqtt.0 : mqtt : TrixiePI - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nina.0 : nina : TrixiePI - enabled + system.adapter.nut.0 : nut : TrixiePI - enabled + system.adapter.ping.0 : ping : TrixiePI - enabled + system.adapter.pollenflug.0 : pollenflug : TrixiePI - enabled + system.adapter.pushover.0 : pushover : TrixiePI - enabled + system.adapter.rpi2.0 : rpi2 : TrixiePI - enabled + system.adapter.samsung_tizen.0 : samsung_tizen : TrixiePI - enabled, port: 8002 system.adapter.schoolfree.0 : schoolfree : TrixiePI - enabled + system.adapter.shelly.0 : shelly : TrixiePI - enabled, port: 5683, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : TrixiePI - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : TrixiePI - enabled system.adapter.sprinklecontrol.0 : sprinklecontrol : TrixiePI - disabled + system.adapter.tagesschau.0 : tagesschau : TrixiePI - enabled + system.adapter.tahoma.0 : tahoma : TrixiePI - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : TrixiePI - enabled + system.adapter.text2command.0 : text2command : TrixiePI - enabled + system.adapter.tr-064.0 : tr-064 : TrixiePI - enabled + system.adapter.trashschedule.0 : trashschedule : TrixiePI - enabled + system.adapter.tuya.0 : tuya : TrixiePI - enabled + system.adapter.tvprogram.0 : tvprogram : TrixiePI - enabled system.adapter.tvspielfilm.0 : tvspielfilm : TrixiePI - disabled system.adapter.upnp.0 : upnp : TrixiePI - disabled system.adapter.vis-bars.0 : vis-bars : TrixiePI - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : TrixiePI - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : TrixiePI - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : TrixiePI - enabled system.adapter.vis-history.0 : vis-history : TrixiePI - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : TrixiePI - disabled system.adapter.vis-icontwo.0 : vis-icontwo : TrixiePI - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : TrixiePI - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : TrixiePI - disabled system.adapter.vis-justgage.0 : vis-justgage : TrixiePI - disabled system.adapter.vis-keyboard.0 : vis-keyboard : TrixiePI - disabled system.adapter.vis-map.0 : vis-map : TrixiePI - disabled system.adapter.vis-material.0 : vis-material : TrixiePI - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : TrixiePI - disabled system.adapter.vis-metro.0 : vis-metro : TrixiePI - disabled system.adapter.vis-players.0 : vis-players : TrixiePI - disabled system.adapter.vis-plumb.0 : vis-plumb : TrixiePI - disabled system.adapter.vis-rgraph.0 : vis-rgraph : TrixiePI - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : TrixiePI - disabled system.adapter.vis-weather.0 : vis-weather : TrixiePI - disabled system.adapter.vis.0 : vis : TrixiePI - enabled + system.adapter.weather-warnings.0 : weather-warnings : TrixiePI - enabled system.adapter.weatherunderground.0 : weatherunderground : TrixiePI - enabled + system.adapter.web.0 : web : TrixiePI - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : TrixiePI - enabled + system.adapter.zigbee.0 : zigbee : TrixiePI - enabled, port: tcp://192.168.178.80:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : TrixiePI - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : TrixiePI - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : TrixiePI - enabled, port: 12001 + system.adapter.hm-rpc.2 : hm-rpc : TrixiePI - enabled, port: 12010 + system.adapter.hm-rpc.3 : hm-rpc : TrixiePI - enabled, port: 12001 + system.adapter.influxdb.0 : influxdb : TrixiePI - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : TrixiePI - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.samsung_tizen.0 : samsung_tizen : TrixiePI - enabled, port: 8002 + system.adapter.shelly.0 : shelly : TrixiePI - enabled, port: 5683, bind: 0.0.0.0 + system.adapter.web.0 : web : TrixiePI - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : TrixiePI - enabled, port: tcp://192.168.178.80:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'latest' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "bydhvs" : 1.5.0 , installed 1.5.0 Adapter "daswetter" : 4.5.3 , installed 4.5.3 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ebus" : 3.8.0 , installed 3.8.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "feiertage" : 1.3.0 , installed 1.3.0 Adapter "fritzbox" : 0.7.0 , installed 0.7.0 Adapter "fritzdect" : 2.6.2 , installed 2.6.3 Adapter "frontier_silicon": 0.5.1 , installed 0.5.1 Adapter "history" : 4.0.0 , installed 3.0.1 [Updatable] Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "logparser" : 2.4.0 , installed 2.4.0 Adapter "modbus" : 8.0.3 , installed 8.0.3 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.25 , installed 0.0.26 Adapter "nut" : 1.7.0 , installed 1.7.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "rpi2" : 3.0.2 , installed 3.0.2 Adapter "samsung_tizen": 1.1.0 , installed 1.1.0 Adapter "schoolfree" : 1.1.13 , installed 1.1.13 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "sprinklecontrol": 0.2.19 , installed 0.2.19 Adapter "tagesschau" : 0.6.0 , installed 0.6.0 Adapter "tahoma" : 0.10.4 , installed 0.11.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "text2command" : 4.0.0 , installed 4.0.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.17.0 Adapter "tvprogram" : 4.0.2 , installed 4.0.2 Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0 Adapter "upnp" : 1.1.0 , installed 1.1.9 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.6.0 , installed 1.6.0 Adapter "vis-icontwo" : 2.11.1 , installed 2.11.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-keyboard" : 0.0.3 , installed 0.0.3 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-material" : 0.2.0 , installed 0.2.0 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.7 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "weather-warnings": 0.10.0, installed 0.10.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 50418 States: 45533 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://deb.nodesource.com/node_22.x nodistro InRelease Get:7 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:8 https://packagecloud.io/ookla/speedtest-cli/debian trixie InRelease Fetched 6922 B in 1s (4680 B/s) Reading package lists... Pending systemupdates: 10 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:3493 0.0.0.0:* LISTEN 0 25604 3128/upsd tcp 0 0 0.0.0.0:8889 0.0.0.0:* LISTEN 0 7018 989/ebusd tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 7017 989/ebusd tcp 0 0 192.168.178.31:3493 0.0.0.0:* LISTEN 0 25606 3128/upsd tcp 0 0 192.168.178.31:12001 0.0.0.0:* LISTEN 1001 10931 1450/io.hm-rpc.1 tcp 0 0 192.168.178.31:12002 0.0.0.0:* LISTEN 1001 12534 1478/io.hm-rpc.3 tcp 0 0 192.168.178.31:12010 0.0.0.0:* LISTEN 1001 11953 1462/io.hm-rpc.2 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 2642 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8444 976/sshd: /usr/sbin tcp 0 0 0.0.0.0:5683 0.0.0.0:* LISTEN 1001 12992 1638/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 11069 1526/io.mqtt.0 tcp 0 0 192.168.178.31:18701 0.0.0.0:* LISTEN 1001 12462 1426/io.hm-rpc.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8757 1116/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 11431 1116/iobroker.js-co tcp6 0 0 :::3000 :::* LISTEN 105 10395 1115/grafana tcp6 0 0 :::111 :::* LISTEN 0 2643 1/init tcp6 0 0 :::22 :::* LISTEN 0 8446 976/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 14910 1997/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 11294 992/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 10578 1190/io.admin.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 14837 1674/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 14838 1674/io.tuya.0 udp 0 0 192.168.178.31:5353 0.0.0.0:* 1001 14436 1662/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7285 559/avahi-daemon: r udp 0 0 0.0.0.0:111 0.0.0.0:* 0 102 1/init udp 0 0 0.0.0.0:41166 0.0.0.0:* 101 7287 559/avahi-daemon: r udp6 0 0 :::43292 :::* 101 7288 559/avahi-daemon: r udp6 0 0 fe80::dea6:32ff:fe9:546 :::* 0 7039 593/NetworkManager udp6 0 0 :::5353 :::* 101 7286 559/avahi-daemon: r udp6 0 0 :::111 :::* 0 5219 1/init *** Log File - Last 25 Lines *** 2026-04-11 10:31:22.332 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.29h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.438 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.30h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.537 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.31h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.638 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.32h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.743 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.33h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.846 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.34h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.951 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.35h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:25.042 - info: weatherunderground.0 (5591) Terminated (NO_ERROR): Without reason 2026-04-11 10:31:25.576 - info: host.TrixiePI instance system.adapter.weatherunderground.0 having pid 5591 terminated with code 0 (NO_ERROR) 2026-04-11 10:31:34.887 - info: dwd.0 (5608) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-04-11 10:31:35.440 - info: host.TrixiePI instance system.adapter.dwd.0 having pid 5608 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2026-04-11 10:31:57.746 - info: ebus.0 (1786) found ebusd update version OK, broadcast.csv: different version, memory 2026-04-11 10:31:58.293 - info: ebus.0 (1786) all history done 2026-04-11 10:32:04.263 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:32:04.314 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:32:04.330 - info: web.0 (1997) ==> Connected system.user.admin from ::ffff:192.168.178.88 2026-04-11 10:32:04.354 - info: web.0 (1997) ==> Connected system.user.admin from ::ffff:192.168.178.88 2026-04-11 10:34:00.964 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:34:01.761 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 vis.0 2026-04-11 10:34:03.841 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:34:23.696 - debug: nina.0 (1810) "69da0742-8f" https://warnung.bund.de/bbk.status/status_120670000000.json 2026-04-11 10:34:23.971 - debug: nina.0 (1810) "69da0743-8f" https://warnung.bund.de/bbk.status/status_120530000000.json 2026-04-11 10:34:23.972 - debug: nina.0 (1810) "69da0742-8f" https://warnung.bund.de/bbk.status/status_120670000000.json 2026-04-11 10:34:27.273 - info: ebus.0 (1786) found ebusd update version OK, broadcast.csv: different version, memory 2026-04-11 10:34:27.792 - info: ebus.0 (1786) all history done iob diag has finished. -
@Jey-Cee
Ok, ich habe mal ein "iob diag" angestossen. Vielleicht erkennst du dort was.========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: TrixiePI Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 10:32:20 up 49 min, 1 user, load average: 2.08, 1.20, 1.23 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sat 2026-04-11 10:32:21 CEST Universal time: Sat 2026-04-11 08:32:21 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/pi GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.6G 100M 1.7M 322M 341M Swap: 4.1G 1.5G 2.6G Total: 8.1G 5.2G 2.7G Active iob-Instances: 47 3795 M total memory 3470 M used memory 1535 M active memory 1574 M inactive memory 95 M free memory 27 M buffer memory 279 M swap cache 3945 M total swap 1452 M used swap 2493 M free swap *** top - Table Of Processes *** top - 10:32:22 up 49 min, 1 user, load average: 2.08, 1.20, 1.23 Tasks: 237 total, 1 running, 236 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.6 us, 3.1 sy, 0.0 ni, 89.1 id, 6.2 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.7 total, 94.8 free, 3470.8 used, 308.0 buff/cache MiB Swap: 3945.5 total, 2493.1 free, 1452.4 used. 324.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 760M 9.3M 750M 2% /run /dev/sda2 ext4 917G 11G 870G 2% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 1.9G 2.9M 1.9G 1% /tmp /dev/sda1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 380M 12K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Apr 11 09:43:08 2026] EXT4-fs (sda2): orphan cleanup on readonly fs [Sat Apr 11 09:43:08 2026] EXT4-fs (sda2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none. [Sat Apr 11 09:43:11 2026] EXT4-fs (sda2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 522M /var/cache 516M /var/cache/apt 383M /var/cache/apt/archives 254M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 231M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 569M /opt/iobroker/iobroker-data/history 458M /opt/iobroker/iobroker-data/files 205M /opt/iobroker/iobroker-data/backup-objects 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 101M /opt/iobroker/iobroker-data/states.jsonl 59M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 9.3M /opt/iobroker/iobroker-data/files/vis.0/main/vis-views.json 9.2M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ESERA-Automation_eBus_Coupler_12001_AL4XV0Y6-if00-port0 *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: TrixiePI TrixiePI (version: 7.0.7, hostname: TrixiePI , alive, uptime: 2929) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 9 +-- iobroker.bosch-ebike@0.1.12 (git+ssh://git@github.com/TA2k/ioBroker.bosch-ebike.git#71ad7a8139a8af772f671e9c37eddf2ad064c69e) +-- iobroker.fritzdect@2.6.3 (git+ssh://git@github.com/foxthefox/ioBroker.fritzdect.git#52438d65d7835107260cdbbbc4f05b98c96fbc64) +-- iobroker.husqvarna-automower@0.6.0-beta.12 (git+ssh://git@github.com/ice987987/ioBroker.husqvarna-automower.git#0426d3f29db494dbd0c67591e8b830bb8c813c6e) +-- iobroker.icons-open-icon-library-png@0.1.3 (git+ssh://git@github.com/ioBroker/ioBroker.icons-open-icon-library-png.git#0847a79d713ee6725ccb6ccfb044c025b73ec946) +-- iobroker.nina@0.0.26 (git+ssh://git@github.com/TA2k/ioBroker.nina.git#99d491a973e79ab12f86aa961414be4249cfd2dc) +-- iobroker.tuya@3.17.0 (git+ssh://git@github.com/Apollon77/ioBroker.tuya.git#640df7360a877f37764a31d628e4d6de3ed1f6e3) +-- iobroker.upnp@1.1.9 (git+ssh://git@github.com/Jey-Cee/ioBroker.upnp.git#c1123f0773152804375ffc0ed44216986194c4d0) +-- iobroker.vis-materialdesign@0.5.94 (git+ssh://git@github.com/Scrounger/ioBroker.vis-materialdesign.git#8b7529d493f223dfc4f1d1f632553fcb35bbcc92) +-- iobroker.vis-players@0.1.7 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.vis-players.git#36cf4f56da3ffea9a10ca948e289e3293ab8f547) Adapter State + system.adapter.admin.0 : admin : TrixiePI - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : TrixiePI - enabled system.adapter.alias-manager.0 : alias-manager : TrixiePI - disabled + system.adapter.backitup.0 : backitup : TrixiePI - enabled + system.adapter.bosch-ebike.0 : bosch-ebike : TrixiePI - enabled + system.adapter.bydhvs.0 : bydhvs : TrixiePI - enabled + system.adapter.daswetter.0 : daswetter : TrixiePI - enabled system.adapter.dwd.0 : dwd : TrixiePI - enabled + system.adapter.ebus.0 : ebus : TrixiePI - enabled + system.adapter.email.0 : email : TrixiePI - enabled system.adapter.feiertage.0 : feiertage : TrixiePI - enabled system.adapter.flot.0 : flot : TrixiePI - disabled + system.adapter.fritzbox.0 : fritzbox : TrixiePI - enabled + system.adapter.fritzdect.0 : fritzdect : TrixiePI - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : TrixiePI - enabled + system.adapter.history.0 : history : TrixiePI - enabled + system.adapter.hm-rega.0 : hm-rega : TrixiePI - enabled + system.adapter.hm-rpc.0 : hm-rpc : TrixiePI - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : TrixiePI - enabled, port: 12001 + system.adapter.hm-rpc.2 : hm-rpc : TrixiePI - enabled, port: 12010 + system.adapter.hm-rpc.3 : hm-rpc : TrixiePI - enabled, port: 12001 system.adapter.husqvarna-automower.0 : husqvarna-automower : TrixiePI - disabled system.adapter.ical.0 : ical : TrixiePI - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: TrixiePI - disabled system.adapter.icons-icons8.0 : icons-icons8 : TrixiePI - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : TrixiePI - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : TrixiePI - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: TrixiePI - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : TrixiePI - disabled + system.adapter.influxdb.0 : influxdb : TrixiePI - enabled, port: 8086 + system.adapter.iot.0 : iot : TrixiePI - enabled + system.adapter.javascript.0 : javascript : TrixiePI - enabled + system.adapter.logparser.0 : logparser : TrixiePI - enabled + system.adapter.modbus.0 : modbus : TrixiePI - enabled + system.adapter.mqtt.0 : mqtt : TrixiePI - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nina.0 : nina : TrixiePI - enabled + system.adapter.nut.0 : nut : TrixiePI - enabled + system.adapter.ping.0 : ping : TrixiePI - enabled + system.adapter.pollenflug.0 : pollenflug : TrixiePI - enabled + system.adapter.pushover.0 : pushover : TrixiePI - enabled + system.adapter.rpi2.0 : rpi2 : TrixiePI - enabled + system.adapter.samsung_tizen.0 : samsung_tizen : TrixiePI - enabled, port: 8002 system.adapter.schoolfree.0 : schoolfree : TrixiePI - enabled + system.adapter.shelly.0 : shelly : TrixiePI - enabled, port: 5683, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : TrixiePI - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : TrixiePI - enabled system.adapter.sprinklecontrol.0 : sprinklecontrol : TrixiePI - disabled + system.adapter.tagesschau.0 : tagesschau : TrixiePI - enabled + system.adapter.tahoma.0 : tahoma : TrixiePI - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : TrixiePI - enabled + system.adapter.text2command.0 : text2command : TrixiePI - enabled + system.adapter.tr-064.0 : tr-064 : TrixiePI - enabled + system.adapter.trashschedule.0 : trashschedule : TrixiePI - enabled + system.adapter.tuya.0 : tuya : TrixiePI - enabled + system.adapter.tvprogram.0 : tvprogram : TrixiePI - enabled system.adapter.tvspielfilm.0 : tvspielfilm : TrixiePI - disabled system.adapter.upnp.0 : upnp : TrixiePI - disabled system.adapter.vis-bars.0 : vis-bars : TrixiePI - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : TrixiePI - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : TrixiePI - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : TrixiePI - enabled system.adapter.vis-history.0 : vis-history : TrixiePI - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : TrixiePI - disabled system.adapter.vis-icontwo.0 : vis-icontwo : TrixiePI - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : TrixiePI - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : TrixiePI - disabled system.adapter.vis-justgage.0 : vis-justgage : TrixiePI - disabled system.adapter.vis-keyboard.0 : vis-keyboard : TrixiePI - disabled system.adapter.vis-map.0 : vis-map : TrixiePI - disabled system.adapter.vis-material.0 : vis-material : TrixiePI - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : TrixiePI - disabled system.adapter.vis-metro.0 : vis-metro : TrixiePI - disabled system.adapter.vis-players.0 : vis-players : TrixiePI - disabled system.adapter.vis-plumb.0 : vis-plumb : TrixiePI - disabled system.adapter.vis-rgraph.0 : vis-rgraph : TrixiePI - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : TrixiePI - disabled system.adapter.vis-weather.0 : vis-weather : TrixiePI - disabled system.adapter.vis.0 : vis : TrixiePI - enabled + system.adapter.weather-warnings.0 : weather-warnings : TrixiePI - enabled system.adapter.weatherunderground.0 : weatherunderground : TrixiePI - enabled + system.adapter.web.0 : web : TrixiePI - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : TrixiePI - enabled + system.adapter.zigbee.0 : zigbee : TrixiePI - enabled, port: tcp://192.168.178.80:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : TrixiePI - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : TrixiePI - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : TrixiePI - enabled, port: 12001 + system.adapter.hm-rpc.2 : hm-rpc : TrixiePI - enabled, port: 12010 + system.adapter.hm-rpc.3 : hm-rpc : TrixiePI - enabled, port: 12001 + system.adapter.influxdb.0 : influxdb : TrixiePI - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : TrixiePI - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.samsung_tizen.0 : samsung_tizen : TrixiePI - enabled, port: 8002 + system.adapter.shelly.0 : shelly : TrixiePI - enabled, port: 5683, bind: 0.0.0.0 + system.adapter.web.0 : web : TrixiePI - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : TrixiePI - enabled, port: tcp://192.168.178.80:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'latest' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "bydhvs" : 1.5.0 , installed 1.5.0 Adapter "daswetter" : 4.5.3 , installed 4.5.3 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ebus" : 3.8.0 , installed 3.8.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "feiertage" : 1.3.0 , installed 1.3.0 Adapter "fritzbox" : 0.7.0 , installed 0.7.0 Adapter "fritzdect" : 2.6.2 , installed 2.6.3 Adapter "frontier_silicon": 0.5.1 , installed 0.5.1 Adapter "history" : 4.0.0 , installed 3.0.1 [Updatable] Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "logparser" : 2.4.0 , installed 2.4.0 Adapter "modbus" : 8.0.3 , installed 8.0.3 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.25 , installed 0.0.26 Adapter "nut" : 1.7.0 , installed 1.7.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "rpi2" : 3.0.2 , installed 3.0.2 Adapter "samsung_tizen": 1.1.0 , installed 1.1.0 Adapter "schoolfree" : 1.1.13 , installed 1.1.13 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "sprinklecontrol": 0.2.19 , installed 0.2.19 Adapter "tagesschau" : 0.6.0 , installed 0.6.0 Adapter "tahoma" : 0.10.4 , installed 0.11.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "text2command" : 4.0.0 , installed 4.0.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.17.0 Adapter "tvprogram" : 4.0.2 , installed 4.0.2 Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0 Adapter "upnp" : 1.1.0 , installed 1.1.9 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.6.0 , installed 1.6.0 Adapter "vis-icontwo" : 2.11.1 , installed 2.11.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-keyboard" : 0.0.3 , installed 0.0.3 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-material" : 0.2.0 , installed 0.2.0 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.7 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "weather-warnings": 0.10.0, installed 0.10.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 50418 States: 45533 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://deb.nodesource.com/node_22.x nodistro InRelease Get:7 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:8 https://packagecloud.io/ookla/speedtest-cli/debian trixie InRelease Fetched 6922 B in 1s (4680 B/s) Reading package lists... Pending systemupdates: 10 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:3493 0.0.0.0:* LISTEN 0 25604 3128/upsd tcp 0 0 0.0.0.0:8889 0.0.0.0:* LISTEN 0 7018 989/ebusd tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 7017 989/ebusd tcp 0 0 192.168.178.31:3493 0.0.0.0:* LISTEN 0 25606 3128/upsd tcp 0 0 192.168.178.31:12001 0.0.0.0:* LISTEN 1001 10931 1450/io.hm-rpc.1 tcp 0 0 192.168.178.31:12002 0.0.0.0:* LISTEN 1001 12534 1478/io.hm-rpc.3 tcp 0 0 192.168.178.31:12010 0.0.0.0:* LISTEN 1001 11953 1462/io.hm-rpc.2 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 2642 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8444 976/sshd: /usr/sbin tcp 0 0 0.0.0.0:5683 0.0.0.0:* LISTEN 1001 12992 1638/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 11069 1526/io.mqtt.0 tcp 0 0 192.168.178.31:18701 0.0.0.0:* LISTEN 1001 12462 1426/io.hm-rpc.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8757 1116/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 11431 1116/iobroker.js-co tcp6 0 0 :::3000 :::* LISTEN 105 10395 1115/grafana tcp6 0 0 :::111 :::* LISTEN 0 2643 1/init tcp6 0 0 :::22 :::* LISTEN 0 8446 976/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 14910 1997/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 11294 992/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 10578 1190/io.admin.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 14837 1674/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 14838 1674/io.tuya.0 udp 0 0 192.168.178.31:5353 0.0.0.0:* 1001 14436 1662/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7285 559/avahi-daemon: r udp 0 0 0.0.0.0:111 0.0.0.0:* 0 102 1/init udp 0 0 0.0.0.0:41166 0.0.0.0:* 101 7287 559/avahi-daemon: r udp6 0 0 :::43292 :::* 101 7288 559/avahi-daemon: r udp6 0 0 fe80::dea6:32ff:fe9:546 :::* 0 7039 593/NetworkManager udp6 0 0 :::5353 :::* 101 7286 559/avahi-daemon: r udp6 0 0 :::111 :::* 0 5219 1/init *** Log File - Last 25 Lines *** 2026-04-11 10:31:22.332 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.29h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.438 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.30h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.537 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.31h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.638 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.32h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.743 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.33h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.846 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.34h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:22.951 - info: weatherunderground.0 (5591) State value to set for "weatherunderground.0.forecastHourly.35h.precipitation" has to be type "value.precipitation" but received type "number" 2026-04-11 10:31:25.042 - info: weatherunderground.0 (5591) Terminated (NO_ERROR): Without reason 2026-04-11 10:31:25.576 - info: host.TrixiePI instance system.adapter.weatherunderground.0 having pid 5591 terminated with code 0 (NO_ERROR) 2026-04-11 10:31:34.887 - info: dwd.0 (5608) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-04-11 10:31:35.440 - info: host.TrixiePI instance system.adapter.dwd.0 having pid 5608 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2026-04-11 10:31:57.746 - info: ebus.0 (1786) found ebusd update version OK, broadcast.csv: different version, memory 2026-04-11 10:31:58.293 - info: ebus.0 (1786) all history done 2026-04-11 10:32:04.263 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:32:04.314 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:32:04.330 - info: web.0 (1997) ==> Connected system.user.admin from ::ffff:192.168.178.88 2026-04-11 10:32:04.354 - info: web.0 (1997) ==> Connected system.user.admin from ::ffff:192.168.178.88 2026-04-11 10:34:00.964 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:34:01.761 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 vis.0 2026-04-11 10:34:03.841 - info: web.0 (1997) <== Disconnect system.user.admin from ::ffff:192.168.178.88 flot 2026-04-11 10:34:23.696 - debug: nina.0 (1810) "69da0742-8f" https://warnung.bund.de/bbk.status/status_120670000000.json 2026-04-11 10:34:23.971 - debug: nina.0 (1810) "69da0743-8f" https://warnung.bund.de/bbk.status/status_120530000000.json 2026-04-11 10:34:23.972 - debug: nina.0 (1810) "69da0742-8f" https://warnung.bund.de/bbk.status/status_120670000000.json 2026-04-11 10:34:27.273 - info: ebus.0 (1786) found ebusd update version OK, broadcast.csv: different version, memory 2026-04-11 10:34:27.792 - info: ebus.0 (1786) all history done iob diag has finished.@Kanumouse Also ganz grundlegend hast du ein Problem mit der Auslastung von deinem System, im Ruhezustand ist sie relativ hoch. Das liegt vermutlich daran, dass dein Arbeitsspeicher sehr voll ist und er viel in den Swap auslagert.
Das könnte auch gleichzeitig das Problem mit UPnP erklären, weil das System dann quasi im Millisekundenbereich einfriert und dadurch Nachrichten verpassen kann. Das muss nicht so sein, es ist aber eine Möglichkeit.Du solltest sehr dringend versuchen, den Compact Mode für einige Adapter zu aktivieren und sie eine Gruppe zu stecken, dann verbrauchen die weniger Arbeitsspeicher. Am besten Adapter, die sehr stabil laufen und unkritisch sind, zusammen in eine Gruppe packen. Musst halt schauen, was für dich am meisten Sinn ergibt. Aber je mehr Adapter du in Compact Mode betreibst, um so mehr Arbeitsspeicher wird freigegeben.
-
@Kanumouse Also ganz grundlegend hast du ein Problem mit der Auslastung von deinem System, im Ruhezustand ist sie relativ hoch. Das liegt vermutlich daran, dass dein Arbeitsspeicher sehr voll ist und er viel in den Swap auslagert.
Das könnte auch gleichzeitig das Problem mit UPnP erklären, weil das System dann quasi im Millisekundenbereich einfriert und dadurch Nachrichten verpassen kann. Das muss nicht so sein, es ist aber eine Möglichkeit.Du solltest sehr dringend versuchen, den Compact Mode für einige Adapter zu aktivieren und sie eine Gruppe zu stecken, dann verbrauchen die weniger Arbeitsspeicher. Am besten Adapter, die sehr stabil laufen und unkritisch sind, zusammen in eine Gruppe packen. Musst halt schauen, was für dich am meisten Sinn ergibt. Aber je mehr Adapter du in Compact Mode betreibst, um so mehr Arbeitsspeicher wird freigegeben.
-
@Jey-Cee
Ok, danke für den Hinweis. Das Problem ist mir bewusst, deshalb werde ich in naher Zukunft auf einen Pi5 mit mehr Speicher umsteigen.
Bis dahin werde ich mal deinen Hinweis umsetzen und mal sehen, ob sich die Situation bessert.ob sich die Situation bessert.
Du könntest auch das Logging auf ein weniger geschwätziges Level zurücksetzen. Warum läuft z. B. die nina.0-Instanz auf debug?
-
ob sich die Situation bessert.
Du könntest auch das Logging auf ein weniger geschwätziges Level zurücksetzen. Warum läuft z. B. die nina.0-Instanz auf debug?
@Thomas-Braun
@jey-cee
Ich hab das Logging auf „Info“ zurückgesetzt und einige Adapter in unterschiedlichen „Compact-Mode-Gruppen“ zu laufen, so dass ich in der Regel ca. 20% freien Speicher habe. Das ändert aber leider nichts am Ergebnis des upnp-Adapters.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden234
Online32.8k
Benutzer82.7k
Themen1.3m
Beiträge