Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@asgothian sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

warum neu installieren, wenn man doch alles hochgezogen bekommt ?

Um z.B. beim RaspberryPi von einem 32Bit-System auf ein 64Bit-System zu kommen. Oder sauber von 10 auf 11.

[Torsten Lehmann]

@thomas-braun said in RPI-Monitor und GPIO rpi2 v2.3.1:

@torsten-lehmann

Wo hast du denn das her?
Im Grunde reicht der Einzeiler:

curl -sLf https://iobroker.net/install.sh | bash -

Der Installer zieht dann auch nodejs usw. rein.

hallo Thomas
hab alles so [https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht](link url) gemacht bekomme rpi2 nicht hin und werde solange darauf verzichten bis es über den offizellen Adapter funktioniert

[Thomas Braun]

@torsten-lehmann

Hier hat es @plc wohl im ersten Anlauf hinbekommen.
Vielleicht kann er dir sagen, was er gemacht hat.

[Thomas Braun]

@Torsten-Lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

ModuleNotFoundError: No module named 'distutils'

Die Meldung bekommst du weg, in dem das Paket python3-setuptools nachinstalliert wird.

sudo apt install python3-setuptools

also.

[mcm1957]

@haus-automatisierung hat heiute eine 3.0.1 released die debian trixie unterstützen sollte:
https://github.com/iobroker-community-adapters/ioBroker.rpi2#301-2025-11-28

[Laser]

Habe das Problem, daß nach Update auf trixie die GPIO's nicht mehr funktionieren. Es wird ja immer abgeraten, über npm etwas zu installieren?

[Thomas Braun]

@Laser

Der Adapter liegt im Beta-Repo.

[Laser]

Ich habe Ihn mal installiert. Aber nicht schimpfen über "wilde" Installation...
EDIT: GPIO wird angesteuert!

[mcm1957]

@Laser sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Habe das Problem, daß nach Update auf trixie die GPIO's nicht mehr funktionieren. Es wird ja immer abgeraten, über npm etwas zu installieren?

Nein, es wird nur abgeraten

• VON GITHUB zu installieren
• direkt MIT npm (aber nicht von npm) zu installieren

:-)

[searcher57]

"Erledigt"

Hallo in die Runde,
ich habe nach einem neuen Aufsetzen eines Raspi 4 auch das Problem den RPI2 Adapter zu installieren.
Mein System:

<PlatformBetriebssystem:linux
Architektur:arm64
CPUs:4
Geschwindigkeit:1800 MHz
Modell:Cortex-A72
RAM:7.6 GB
System-Betriebszeit:00:37:15
Node.js:v22.22.0
Zeit:1770639333920
Zeitversatz:-60
NPM:10.9.4
Adapter-Anzahl:595
Datenträgergröße:58.0 GB
Freier Festplattenspeicher:51.1 GB
Aktive Instanzen:5
Pfad:/opt/iobroker/
Betriebszeit:00:00:23
aktiv:true
_nodeCurrent:22.22.0
_nodeNewest:22.22.0
_nodeNewestNext:22.22.0
_npmCurrent:10.9.4
_npmNewest:10.9.4
_npmNewestNext:10.9.4>

Das Ergebnis iob diag:

Script v.2026-01-31

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: Raspi48GB
       Icon name: computer
          Kernel: Linux 6.12.62+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 13:47:58 up  1:09,  1 user,  load average: 0.48, 0.32, 0.33
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Mon 2026-02-09 13:47:58 CET
           Universal time: Mon 2026-02-09 12:47:58 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        2.5G        4.8G         12M        1.0G        5.7G
Swap:           2.1G          0B        2.1G
Total:           10G        2.5G        6.9G

Active iob-Instances:   27

         7820 M total memory
         2379 M used memory
         2349 M active memory
          640 M inactive memory
         4579 M free memory
           87 M buffer memory
          885 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 13:47:59 up  1:09,  1 user,  load average: 0.48, 0.32, 0.33
Tasks: 203 total,   1 running, 202 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.3 sy,  0.0 ni, 97.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7820.7 total,   4579.2 free,   2379.7 used,    973.4 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   5441.0 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  9.3M  1.6G   1% /run
/dev/mmcblk0p2 ext4       59G  7.0G   49G  13% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G  2.8M  3.9G   1% /tmp
/dev/mmcblk0p1 vfat      510M   66M  445M  13% /boot/firmware
/dev/sda1      exfat      29G  951M   28G   4% /mnt/usb0
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     783M  8.0K  783M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Feb  9 12:38:20 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Mon Feb  9 12:38:20 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Mon Feb  9 12:38:22 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
|-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/mnt/usb0      /dev/sda1      exfat  rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
238M    /var/cache
233M    /var/cache/apt
189M    /var/lib
152M    /var/lib/apt/lists

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
32M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
482M    /opt/iobroker/iobroker-data/
399M    /opt/iobroker/iobroker-data/files
68M     /opt/iobroker/iobroker-data/files/vis-2
67M     /opt/iobroker/iobroker-data/files/echarts.admin
61M     /opt/iobroker/iobroker-data/files/echarts

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/objects.jsonl
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.0
/usr/bin/node           v22.22.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4

✓ Node.js installation is correct

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.0-1nodesource1
  Version table:
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
Raspi48GB           Raspi48GB (version: 7.0.7, hostname: Raspi48GB     , alive, uptime: 1969)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.22
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : Raspi48GB                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : Raspi48GB                                -  enabled
  system.adapter.alias-manager.0          : alias-manager         : Raspi48GB                                - disabled
+ system.adapter.awtrix-light.0           : awtrix-light          : Raspi48GB                                -  enabled
+ system.adapter.awtrix-light.1           : awtrix-light          : Raspi48GB                                -  enabled
+ system.adapter.backitup.0               : backitup              : Raspi48GB                                -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : Raspi48GB                                -  enabled
  system.adapter.devices.0                : devices               : Raspi48GB                                - disabled
+ system.adapter.discovery.0              : discovery             : Raspi48GB                                -  enabled
+ system.adapter.doorbird.0               : doorbird              : Raspi48GB                                -  enabled
+ system.adapter.echarts.0                : echarts               : Raspi48GB                                -  enabled
+ system.adapter.followthesun.0           : followthesun          : Raspi48GB                                -  enabled
+ system.adapter.frontier_silicon.0       : frontier_silicon      : Raspi48GB                                -  enabled
  system.adapter.frontier_silicon.1       : frontier_silicon      : Raspi48GB                                - disabled
  system.adapter.frontier_silicon.2       : frontier_silicon      : Raspi48GB                                - disabled
  system.adapter.frontier_silicon.3       : frontier_silicon      : Raspi48GB                                - disabled
+ system.adapter.hm-rega.0                : hm-rega               : Raspi48GB                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
  system.adapter.influxdb.0               : influxdb              : Raspi48GB                                - disabled, port: 8086
+ system.adapter.iot.0                    : iot                   : Raspi48GB                                -  enabled
+ system.adapter.javascript.0             : javascript            : Raspi48GB                                -  enabled
  system.adapter.mqtt.0                   : mqtt                  : Raspi48GB                                - disabled, port: 1883, bind: 127.0.0.1
  system.adapter.openweathermap.0         : openweathermap        : Raspi48GB                                -  enabled
+ system.adapter.shelly.0                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspi48GB                                -  enabled, port: 8087, bind: 192.168.178.57, run as: admin
+ system.adapter.smartmeter.0             : smartmeter            : Raspi48GB                                -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : Raspi48GB                                -  enabled
+ system.adapter.telegram.0               : telegram              : Raspi48GB                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : Raspi48GB                                -  enabled
+ system.adapter.tr-064.0                 : tr-064                : Raspi48GB                                -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : Raspi48GB                                -  enabled
+ system.adapter.web.0                    : web                   : Raspi48GB                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : Raspi48GB                                -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Raspi48GB                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspi48GB                                -  enabled, port: 8087, bind: 192.168.178.57, run as: admin
+ system.adapter.telegram.0               : telegram              : Raspi48GB                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : Raspi48GB                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.22   , installed 7.7.22
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "awtrix-light" : 3.0.0    , installed 3.0.0
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "broadlink2"   : 2.3.0    , installed 2.3.0
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "doorbird"     : 3.0.0    , installed 3.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "followthesun" : 0.5.2    , installed 0.5.2
Adapter    "frontier_silicon": 0.5.0 , installed 0.5.0
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 5.0.7    , installed 5.0.7
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "openweathermap": 1.1.2   , installed 1.1.2
Adapter    "shelly"       : 10.5.2   , installed 10.5.2
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "text2command" : 4.0.0    , installed 4.0.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis-2"        : 2.13.4   , installed 2.13.4
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        14434
States:         11397

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending systemupdates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6815       1132/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          1345       1/init
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       43665      3054/iobroker.js-co
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       44508      3054/iobroker.js-co
tcp        0      0 192.168.178.74:42010    0.0.0.0:*               LISTEN      1001       43949      3258/io.hm-rpc.0
tcp        0      0 192.168.178.74:42001    0.0.0.0:*               LISTEN      1001       43977      3275/io.hm-rpc.1
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       45313      3345/io.shelly.1
tcp        0      0 192.168.178.74:8100     0.0.0.0:*               LISTEN      1001       45415      3413/io.doorbird.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          9426       1132/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          1346       1/init
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       45650      3590/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       43766      3072/io.admin.0
udp        0      0 0.0.0.0:44785           0.0.0.0:*                           1001       45145      3200/io.broadlink2.
udp        0      0 0.0.0.0:36634           0.0.0.0:*                           1001       74840      3200/io.broadlink2.
udp        0      0 0.0.0.0:44909           0.0.0.0:*                           1001       58177      3200/io.broadlink2.
udp        0      0 0.0.0.0:36811           0.0.0.0:*                           1001       45156      3200/io.broadlink2.
udp        0      0 0.0.0.0:41028           0.0.0.0:*                           1001       45159      3200/io.broadlink2.
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          4188       1/init
udp        0      0 0.0.0.0:49310           0.0.0.0:*                           1001       48065      3200/io.broadlink2.
udp        0      0 0.0.0.0:53416           0.0.0.0:*                           1001       48071      3200/io.broadlink2.
udp        0      0 0.0.0.0:41288           0.0.0.0:*                           1001       74845      3200/io.broadlink2.
udp        0      0 0.0.0.0:57787           0.0.0.0:*                           1001       74843      3200/io.broadlink2.
udp        0      0 0.0.0.0:37328           0.0.0.0:*                           1001       58175      3200/io.broadlink2.
udp        0      0 0.0.0.0:57829           0.0.0.0:*                           1001       45886      3200/io.broadlink2.
udp        0      0 0.0.0.0:57875           0.0.0.0:*                           1001       45157      3200/io.broadlink2.
udp        0      0 0.0.0.0:53985           0.0.0.0:*                           1001       45889      3200/io.broadlink2.
udp        0      0 0.0.0.0:33656           0.0.0.0:*                           1001       47458      3200/io.broadlink2.
udp        0      0 0.0.0.0:37760           0.0.0.0:*                           1001       45895      3200/io.broadlink2.
udp        0      0 0.0.0.0:58254           0.0.0.0:*                           1001       74847      3200/io.broadlink2.
udp        0      0 0.0.0.0:50108           0.0.0.0:*                           1001       58181      3200/io.broadlink2.
udp        0      0 0.0.0.0:54208           0.0.0.0:*                           1001       43921      3200/io.broadlink2.
udp        0      0 0.0.0.0:33769           0.0.0.0:*                           1001       42710      3200/io.broadlink2.
udp        0      0 0.0.0.0:37909           0.0.0.0:*                           1001       48069      3200/io.broadlink2.
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        748        627/avahi-daemon: r
udp        0      0 0.0.0.0:46333           0.0.0.0:*                           1001       74841      3200/io.broadlink2.
udp        0      0 0.0.0.0:34119           0.0.0.0:*                           1001       43922      3200/io.broadlink2.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       44858      3327/io.shelly.0
udp        0      0 0.0.0.0:55479           0.0.0.0:*                           1001       42998      3200/io.broadlink2.
udp        0      0 0.0.0.0:39177           0.0.0.0:*                           1001       45497      3200/io.broadlink2.
udp        0      0 0.0.0.0:47464           0.0.0.0:*                           101        750        627/avahi-daemon: r
udp        0      0 0.0.0.0:35179           0.0.0.0:*                           1001       58179      3200/io.broadlink2.
udp        0      0 0.0.0.0:43422           0.0.0.0:*                           1001       45144      3200/io.broadlink2.
udp        0      0 0.0.0.0:43484           0.0.0.0:*                           1001       45160      3200/io.broadlink2.
udp        0      0 0.0.0.0:55855           0.0.0.0:*                           1001       42996      3200/io.broadlink2.
udp        0      0 0.0.0.0:59974           0.0.0.0:*                           1001       42720      3200/io.broadlink2.
udp        0      0 0.0.0.0:35400           0.0.0.0:*                           1001       42708      3200/io.broadlink2.
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1001       45141      3200/io.broadlink2.
udp        0      0 0.0.0.0:39609           0.0.0.0:*                           1001       45499      3200/io.broadlink2.
udp        0      0 0.0.0.0:56028           0.0.0.0:*                           1001       42716      3200/io.broadlink2.
udp        0      0 0.0.0.0:35620           0.0.0.0:*                           1001       45148      3200/io.broadlink2.
udp        0      0 0.0.0.0:52222           0.0.0.0:*                           1001       48067      3200/io.broadlink2.
udp        0      0 0.0.0.0:44067           0.0.0.0:*                           1001       74849      3200/io.broadlink2.
udp        0      0 0.0.0.0:60508           0.0.0.0:*                           1001       58173      3200/io.broadlink2.
udp        0      0 0.0.0.0:60567           0.0.0.0:*                           1001       48074      3200/io.broadlink2.
udp        0      0 0.0.0.0:56688           0.0.0.0:*                           1001       45153      3200/io.broadlink2.
udp        0      0 0.0.0.0:40380           0.0.0.0:*                           1001       42713      3200/io.broadlink2.
udp        0      0 0.0.0.0:60912           0.0.0.0:*                           1001       45892      3200/io.broadlink2.
udp        0      0 0.0.0.0:40598           0.0.0.0:*                           1001       46276      3200/io.broadlink2.
udp6       0      0 :::111                  :::*                                0          4189       1/init
udp6       0      0 fe80::da3a:ddff:fe4:546 :::*                                0          9484       675/NetworkManager
udp6       0      0 :::45868                :::*                                101        751        627/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                101        749        627/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-02-09 13:17:18.896  - info: web.0 (3590) http server listening on port 8082
2026-02-09 13:18:55.624  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:18:55.625  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:47724
2026-02-09 13:21:19.220  - info: smartmeter.0 (3372) Received 13 values, 5 updated
2026-02-09 13:22:55.627  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:22:55.628  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:46874
2026-02-09 13:26:20.766  - info: smartmeter.0 (3372) Received 13 values, 6 updated
2026-02-09 13:30:55.637  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:30:55.639  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:54686
2026-02-09 13:31:21.487  - info: smartmeter.0 (3372) Received 13 values, 8 updated
2026-02-09 13:36:25.803  - info: smartmeter.0 (3372) Received 13 values, 8 updated
2026-02-09 13:40:29.045  - info: host.Raspi48GB instance system.adapter.yr.0 in version "5.3.0" started with pid 4573
2026-02-09 13:40:31.687  - info: yr.0 (4573) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v22.22.0, js-controller: 7.0.7
2026-02-09 13:40:31.713  - info: yr.0 (4573) longitude/longitude will be set by self-Config - longitude: 7.0362624235667255 latitude: 50.622376836807405
2026-02-09 13:41:01.657  - info: yr.0 (4573) Data updated.
2026-02-09 13:41:01.660  - info: yr.0 (4573) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2026-02-09 13:41:02.200  - info: host.Raspi48GB instance system.adapter.yr.0 having pid 4573 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2026-02-09 13:41:27.244  - info: smartmeter.0 (3372) Received 13 values, 7 updated
2026-02-09 13:46:30.025  - info: smartmeter.0 (3372) Received 13 values, 5 updated
2026-02-09 13:46:55.652  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:46:55.653  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:36634

Die Fehlermeldung nach Installation RPI2:

$ iobroker add rpi2 --host Raspi48GB

NPM version: 10.9.4

Installing iobroker.rpi2@2.4.0... (System call)

host.Raspi48GB Cannot install iobroker.rpi2@2.4.0: 1

ERROR: Process exited with code 25>

Was mach ich schon wieder falsch?

[Asgothian]

@searcher57 sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Hallo in die Runde,
ich habe nach einem neuen Aufsetzen eines Raspi 4 auch das Problem den RPI2 Adapter zu installieren.

Würdest Du bitte als erstes deinen Post so editieren das er auch lesbar ist ? Da passt etwas mit den Code-Tags nicht, und der Fliesstext über viele Seiten ist echt unleserlich.

A.

[searcher57]

Noch mal von vorn!
Fehlermeldung nach Installation:

$ iobroker add rpi2 --host Raspi48GB

NPM version: 10.9.4

Installing iobroker.rpi2@2.4.0... (System call)

host.Raspi48GB Cannot install iobroker.rpi2@2.4.0: 1

ERROR: Process exited with code 25

Ausgabe iob diag:

```bash
Script v.2026-01-31

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: Raspi48GB
       Icon name: computer
          Kernel: Linux 6.12.62+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 13:47:58 up  1:09,  1 user,  load average: 0.48, 0.32, 0.33
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Mon 2026-02-09 13:47:58 CET
           Universal time: Mon 2026-02-09 12:47:58 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        2.5G        4.8G         12M        1.0G        5.7G
Swap:           2.1G          0B        2.1G
Total:           10G        2.5G        6.9G

Active iob-Instances:   27

         7820 M total memory
         2379 M used memory
         2349 M active memory
          640 M inactive memory
         4579 M free memory
           87 M buffer memory
          885 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 13:47:59 up  1:09,  1 user,  load average: 0.48, 0.32, 0.33
Tasks: 203 total,   1 running, 202 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.3 sy,  0.0 ni, 97.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7820.7 total,   4579.2 free,   2379.7 used,    973.4 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   5441.0 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  9.3M  1.6G   1% /run
/dev/mmcblk0p2 ext4       59G  7.0G   49G  13% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G  2.8M  3.9G   1% /tmp
/dev/mmcblk0p1 vfat      510M   66M  445M  13% /boot/firmware
/dev/sda1      exfat      29G  951M   28G   4% /mnt/usb0
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     783M  8.0K  783M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Feb  9 12:38:20 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Mon Feb  9 12:38:20 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Mon Feb  9 12:38:22 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
|-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/mnt/usb0      /dev/sda1      exfat  rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
238M    /var/cache
233M    /var/cache/apt
189M    /var/lib
152M    /var/lib/apt/lists

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
32M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
482M    /opt/iobroker/iobroker-data/
399M    /opt/iobroker/iobroker-data/files
68M     /opt/iobroker/iobroker-data/files/vis-2
67M     /opt/iobroker/iobroker-data/files/echarts.admin
61M     /opt/iobroker/iobroker-data/files/echarts

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/objects.jsonl
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.0
/usr/bin/node           v22.22.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4

✓ Node.js installation is correct

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.0-1nodesource1
  Version table:
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
Raspi48GB           Raspi48GB (version: 7.0.7, hostname: Raspi48GB     , alive, uptime: 1969)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.22
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : Raspi48GB                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : Raspi48GB                                -  enabled
  system.adapter.alias-manager.0          : alias-manager         : Raspi48GB                                - disabled
+ system.adapter.awtrix-light.0           : awtrix-light          : Raspi48GB                                -  enabled
+ system.adapter.awtrix-light.1           : awtrix-light          : Raspi48GB                                -  enabled
+ system.adapter.backitup.0               : backitup              : Raspi48GB                                -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : Raspi48GB                                -  enabled
  system.adapter.devices.0                : devices               : Raspi48GB                                - disabled
+ system.adapter.discovery.0              : discovery             : Raspi48GB                                -  enabled
+ system.adapter.doorbird.0               : doorbird              : Raspi48GB                                -  enabled
+ system.adapter.echarts.0                : echarts               : Raspi48GB                                -  enabled
+ system.adapter.followthesun.0           : followthesun          : Raspi48GB                                -  enabled
+ system.adapter.frontier_silicon.0       : frontier_silicon      : Raspi48GB                                -  enabled
  system.adapter.frontier_silicon.1       : frontier_silicon      : Raspi48GB                                - disabled
  system.adapter.frontier_silicon.2       : frontier_silicon      : Raspi48GB                                - disabled
  system.adapter.frontier_silicon.3       : frontier_silicon      : Raspi48GB                                - disabled
+ system.adapter.hm-rega.0                : hm-rega               : Raspi48GB                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
  system.adapter.influxdb.0               : influxdb              : Raspi48GB                                - disabled, port: 8086
+ system.adapter.iot.0                    : iot                   : Raspi48GB                                -  enabled
+ system.adapter.javascript.0             : javascript            : Raspi48GB                                -  enabled
  system.adapter.mqtt.0                   : mqtt                  : Raspi48GB                                - disabled, port: 1883, bind: 127.0.0.1
  system.adapter.openweathermap.0         : openweathermap        : Raspi48GB                                -  enabled
+ system.adapter.shelly.0                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspi48GB                                -  enabled, port: 8087, bind: 192.168.178.57, run as: admin
+ system.adapter.smartmeter.0             : smartmeter            : Raspi48GB                                -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : Raspi48GB                                -  enabled
+ system.adapter.telegram.0               : telegram              : Raspi48GB                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : Raspi48GB                                -  enabled
+ system.adapter.tr-064.0                 : tr-064                : Raspi48GB                                -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : Raspi48GB                                -  enabled
+ system.adapter.web.0                    : web                   : Raspi48GB                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : Raspi48GB                                -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Raspi48GB                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspi48GB                                -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : Raspi48GB                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspi48GB                                -  enabled, port: 8087, bind: 192.168.178.57, run as: admin
+ system.adapter.telegram.0               : telegram              : Raspi48GB                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : Raspi48GB                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.22   , installed 7.7.22
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "awtrix-light" : 3.0.0    , installed 3.0.0
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "broadlink2"   : 2.3.0    , installed 2.3.0
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "doorbird"     : 3.0.0    , installed 3.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "followthesun" : 0.5.2    , installed 0.5.2
Adapter    "frontier_silicon": 0.5.0 , installed 0.5.0
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 5.0.7    , installed 5.0.7
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "openweathermap": 1.1.2   , installed 1.1.2
Adapter    "shelly"       : 10.5.2   , installed 10.5.2
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "text2command" : 4.0.0    , installed 4.0.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis-2"        : 2.13.4   , installed 2.13.4
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        14434
States:         11397

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending systemupdates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6815       1132/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          1345       1/init
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       43665      3054/iobroker.js-co
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       44508      3054/iobroker.js-co
tcp        0      0 192.168.178.74:42010    0.0.0.0:*               LISTEN      1001       43949      3258/io.hm-rpc.0
tcp        0      0 192.168.178.74:42001    0.0.0.0:*               LISTEN      1001       43977      3275/io.hm-rpc.1
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       45313      3345/io.shelly.1
tcp        0      0 192.168.178.74:8100     0.0.0.0:*               LISTEN      1001       45415      3413/io.doorbird.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          9426       1132/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          1346       1/init
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       45650      3590/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       43766      3072/io.admin.0
udp        0      0 0.0.0.0:44785           0.0.0.0:*                           1001       45145      3200/io.broadlink2.
udp        0      0 0.0.0.0:36634           0.0.0.0:*                           1001       74840      3200/io.broadlink2.
udp        0      0 0.0.0.0:44909           0.0.0.0:*                           1001       58177      3200/io.broadlink2.
udp        0      0 0.0.0.0:36811           0.0.0.0:*                           1001       45156      3200/io.broadlink2.
udp        0      0 0.0.0.0:41028           0.0.0.0:*                           1001       45159      3200/io.broadlink2.
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          4188       1/init
udp        0      0 0.0.0.0:49310           0.0.0.0:*                           1001       48065      3200/io.broadlink2.
udp        0      0 0.0.0.0:53416           0.0.0.0:*                           1001       48071      3200/io.broadlink2.
udp        0      0 0.0.0.0:41288           0.0.0.0:*                           1001       74845      3200/io.broadlink2.
udp        0      0 0.0.0.0:57787           0.0.0.0:*                           1001       74843      3200/io.broadlink2.
udp        0      0 0.0.0.0:37328           0.0.0.0:*                           1001       58175      3200/io.broadlink2.
udp        0      0 0.0.0.0:57829           0.0.0.0:*                           1001       45886      3200/io.broadlink2.
udp        0      0 0.0.0.0:57875           0.0.0.0:*                           1001       45157      3200/io.broadlink2.
udp        0      0 0.0.0.0:53985           0.0.0.0:*                           1001       45889      3200/io.broadlink2.
udp        0      0 0.0.0.0:33656           0.0.0.0:*                           1001       47458      3200/io.broadlink2.
udp        0      0 0.0.0.0:37760           0.0.0.0:*                           1001       45895      3200/io.broadlink2.
udp        0      0 0.0.0.0:58254           0.0.0.0:*                           1001       74847      3200/io.broadlink2.
udp        0      0 0.0.0.0:50108           0.0.0.0:*                           1001       58181      3200/io.broadlink2.
udp        0      0 0.0.0.0:54208           0.0.0.0:*                           1001       43921      3200/io.broadlink2.
udp        0      0 0.0.0.0:33769           0.0.0.0:*                           1001       42710      3200/io.broadlink2.
udp        0      0 0.0.0.0:37909           0.0.0.0:*                           1001       48069      3200/io.broadlink2.
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        748        627/avahi-daemon: r
udp        0      0 0.0.0.0:46333           0.0.0.0:*                           1001       74841      3200/io.broadlink2.
udp        0      0 0.0.0.0:34119           0.0.0.0:*                           1001       43922      3200/io.broadlink2.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       44858      3327/io.shelly.0
udp        0      0 0.0.0.0:55479           0.0.0.0:*                           1001       42998      3200/io.broadlink2.
udp        0      0 0.0.0.0:39177           0.0.0.0:*                           1001       45497      3200/io.broadlink2.
udp        0      0 0.0.0.0:47464           0.0.0.0:*                           101        750        627/avahi-daemon: r
udp        0      0 0.0.0.0:35179           0.0.0.0:*                           1001       58179      3200/io.broadlink2.
udp        0      0 0.0.0.0:43422           0.0.0.0:*                           1001       45144      3200/io.broadlink2.
udp        0      0 0.0.0.0:43484           0.0.0.0:*                           1001       45160      3200/io.broadlink2.
udp        0      0 0.0.0.0:55855           0.0.0.0:*                           1001       42996      3200/io.broadlink2.
udp        0      0 0.0.0.0:59974           0.0.0.0:*                           1001       42720      3200/io.broadlink2.
udp        0      0 0.0.0.0:35400           0.0.0.0:*                           1001       42708      3200/io.broadlink2.
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1001       45141      3200/io.broadlink2.
udp        0      0 0.0.0.0:39609           0.0.0.0:*                           1001       45499      3200/io.broadlink2.
udp        0      0 0.0.0.0:56028           0.0.0.0:*                           1001       42716      3200/io.broadlink2.
udp        0      0 0.0.0.0:35620           0.0.0.0:*                           1001       45148      3200/io.broadlink2.
udp        0      0 0.0.0.0:52222           0.0.0.0:*                           1001       48067      3200/io.broadlink2.
udp        0      0 0.0.0.0:44067           0.0.0.0:*                           1001       74849      3200/io.broadlink2.
udp        0      0 0.0.0.0:60508           0.0.0.0:*                           1001       58173      3200/io.broadlink2.
udp        0      0 0.0.0.0:60567           0.0.0.0:*                           1001       48074      3200/io.broadlink2.
udp        0      0 0.0.0.0:56688           0.0.0.0:*                           1001       45153      3200/io.broadlink2.
udp        0      0 0.0.0.0:40380           0.0.0.0:*                           1001       42713      3200/io.broadlink2.
udp        0      0 0.0.0.0:60912           0.0.0.0:*                           1001       45892      3200/io.broadlink2.
udp        0      0 0.0.0.0:40598           0.0.0.0:*                           1001       46276      3200/io.broadlink2.
udp6       0      0 :::111                  :::*                                0          4189       1/init
udp6       0      0 fe80::da3a:ddff:fe4:546 :::*                                0          9484       675/NetworkManager
udp6       0      0 :::45868                :::*                                101        751        627/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                101        749        627/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-02-09 13:17:18.896  - info: web.0 (3590) http server listening on port 8082
2026-02-09 13:18:55.624  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:18:55.625  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:47724
2026-02-09 13:21:19.220  - info: smartmeter.0 (3372) Received 13 values, 5 updated
2026-02-09 13:22:55.627  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:22:55.628  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:46874
2026-02-09 13:26:20.766  - info: smartmeter.0 (3372) Received 13 values, 6 updated
2026-02-09 13:30:55.637  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:30:55.639  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:54686
2026-02-09 13:31:21.487  - info: smartmeter.0 (3372) Received 13 values, 8 updated
2026-02-09 13:36:25.803  - info: smartmeter.0 (3372) Received 13 values, 8 updated
2026-02-09 13:40:29.045  - info: host.Raspi48GB instance system.adapter.yr.0 in version "5.3.0" started with pid 4573
2026-02-09 13:40:31.687  - info: yr.0 (4573) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v22.22.0, js-controller: 7.0.7
2026-02-09 13:40:31.713  - info: yr.0 (4573) longitude/longitude will be set by self-Config - longitude: 7.0362624235667255 latitude: 50.622376836807405
2026-02-09 13:41:01.657  - info: yr.0 (4573) Data updated.
2026-02-09 13:41:01.660  - info: yr.0 (4573) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2026-02-09 13:41:02.200  - info: host.Raspi48GB instance system.adapter.yr.0 having pid 4573 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2026-02-09 13:41:27.244  - info: smartmeter.0 (3372) Received 13 values, 7 updated
2026-02-09 13:46:30.025  - info: smartmeter.0 (3372) Received 13 values, 5 updated
2026-02-09 13:46:55.652  - info: broadlink2.0 (3200) interface to be used: { netmaskBits: 24, address: '192.168.178.74/24', addrs: [ 192, 168, 178, 74 ], cidr: '192.168.178.74/24', bcaddr: '192.168.178.255'
}:
2026-02-09 13:46:55.653  - info: broadlink2.0 (3200) discover  [ '192.168.178.31' ] from 0.0.0.0:36634

Mein System:

PlatformBetriebssystem:linux
Architektur:arm64
CPUs:4
Geschwindigkeit:1800 MHz
Modell:Cortex-A72
RAM:7.6 GB
System-Betriebszeit:00:37:15
Node.js:v22.22.0
Zeit:1770639333920
Zeitversatz:-60
NPM:10.9.4
Adapter-Anzahl:595
Datenträgergröße:58.0 GB
Freier Festplattenspeicher:51.1 GB
Aktive Instanzen:5
Pfad:/opt/iobroker/
Betriebszeit:00:00:23
aktiv:true
_nodeCurrent:22.22.0
_nodeNewest:22.22.0
_nodeNewestNext:22.22.0
_npmCurrent:10.9.4
_npmNewest:10.9.4
_npmNewestNext:10.9.4

[Thomas Braun]

@searcher57 sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

pi

Bitte nicht mehr den username 'pi' bei neuen Installationen verwenden.

Zum Thema:

Ist die libgpiod installiert?

sudo apt update
apt policy libgpio*

anschauen.

[searcher57]

Ich mach es nochmal:

sudo apt update
apt policy libgpio*
OK:1 http://deb.debian.org/debian trixie InRelease
OK:2 http://deb.debian.org/debian trixie-updates InRelease
OK:3 http://deb.debian.org/debian-security trixie-security InRelease
OK:4 http://archive.raspberrypi.com/debian trixie InRelease
OK:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Alle Pakete sind aktuell.
libgpiod-dev:
  Installiert:           2.2.1-2+deb13u1
  Installationskandidat: 2.2.1-2+deb13u1
  Versionstabelle:
 *** 2.2.1-2+deb13u1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status
libgpiod-doc:
  Installiert:           (keine)
  Installationskandidat: 2.2.1-2+deb13u1
  Versionstabelle:
     2.2.1-2+deb13u1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        500 http://deb.debian.org/debian trixie/main armhf Packages
libgpiolib0:
  Installiert:           20251120-1
  Installationskandidat: 20251120-1
lines 1-17...skipping...
libgpiod-dev:
  Installiert:           2.2.1-2+deb13u1
  Installationskandidat: 2.2.1-2+deb13u1
  Versionstabelle:
 *** 2.2.1-2+deb13u1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status
libgpiod-doc:
  Installiert:           (keine)
  Installationskandidat: 2.2.1-2+deb13u1
  Versionstabelle:
     2.2.1-2+deb13u1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        500 http://deb.debian.org/debian trixie/main armhf Packages
libgpiolib0:
  Installiert:           20251120-1
  Installationskandidat: 20251120-1
  Versionstabelle:
 *** 20251120-1 500
        500 http://archive.raspberrypi.com/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status
libgpiolib-dev:
  Installiert:           (keine)
  Installationskandidat: 20251120-1
  Versionstabelle:
     20251120-1 500
        500 http://archive.raspberrypi.com/debian trixie/main arm64 Packages
libgpiolib0-dbgsym:
  Installiert:           (keine)
  Installationskandidat: 20251120-1
  Versionstabelle:
     20251120-1 500
        500 http://archive.raspberrypi.com/debian trixie/main arm64 Packages
libgpiod3:
  Installiert:           2.2.1-2+deb13u1
  Installationskandidat: 2.2.1-2+deb13u1
  Versionstabelle:
 *** 2.2.1-2+deb13u1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status
~
~
~
~
~
~
~
~
lines 1-40/40 (END)

[searcher57]

Nach Installation kommt das:

$ iobroker add rpi2 --host Raspi48GB

NPM version: 10.9.4

Installing iobroker.rpi2@2.4.0... (System call)

npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Verzeichnis „/opt/iobroker/node_modules/opengpio/build“ wird betretennpm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Verzeichnis „/opt/iobroker/node_modules/opengpio/build“ wird verlassennpm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Fehler 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.62+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.22.0npm error gyp ERR! node-gyp -v v11.2.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-02-09T13_10_48_843Z-debug-0.log

host.Raspi48GB Cannot install iobroker.rpi2@2.4.0: 1

ERROR: Process exited with code 25

[searcher57]

$ iobroker add rpi2 --host Raspi48GB

NPM version: 10.9.4

Installing iobroker.rpi2@2.4.0... (System call)

npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Verzeichnis „/opt/iobroker/node_modules/opengpio/build“ wird betretennpm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Verzeichnis „/opt/iobroker/node_modules/opengpio/build“ wird verlassennpm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Fehler 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.62+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.22.0npm error gyp ERR! node-gyp -v v11.2.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-02-09T13_28_05_472Z-debug-0.log

host.Raspi48GB Cannot install iobroker.rpi2@2.4.0: 1

ERROR: Process exited with code 25

[Thomas Braun]

@searcher57 sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Mach das mal in einem Terminal und kopier die Ausgaben dann vor dort. Da werden dann auch Zeilenumbrüche richtig dargestellt und man kann das lesen.

iobroker add rpi2 --host Raspi48GB --debug

[searcher57]

 $ iobroker add rpi2 --host Raspi48GB --debug
NPM version: 10.9.4
Installing iobroker.rpi2@2.4.0... (System call)

> iobroker.rpi2@2.4.0 preinstall
> sudo apt-get install -y libgpiod-dev || exit 0

Paketlisten werden gelesen…
Abhängigkeitsbaum wird aufgebaut…
Statusinformationen werden eingelesen…
libgpiod-dev ist schon die neueste Version (2.2.1-2+deb13u1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

> node-dht-sensor@0.4.5 install
> node-gyp configure

gyp info it worked if it ends with ok
gyp info using node-gyp@11.2.0
gyp info using node@22.22.0 | linux | arm64
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args 'binding.gyp',
gyp info spawn args '-f',
gyp info spawn args 'make',
gyp info spawn args '-I',
gyp info spawn args '/opt/iobroker/node_modules/node-dht-sensor/build/config.gypi',
gyp info spawn args '-I',
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args '-I',
gyp info spawn args '/home/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',
gyp info spawn args '-Dlibrary=shared_library',
gyp info spawn args '-Dvisibility=default',
gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.22.0',
gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',
gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/node-dht-sensor',
gyp info spawn args '-Dnode_engine=v8',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.'
gyp info spawn args ]
gyp info ok

> opengpio@1.0.18 install
> node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@11.2.0
gyp info using node@22.22.0 | linux | arm64
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args 'binding.gyp',
gyp info spawn args '-f',
gyp info spawn args 'make',
gyp info spawn args '-I',
gyp info spawn args '/opt/iobroker/node_modules/opengpio/build/config.gypi',
gyp info spawn args '-I',
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args '-I',
gyp info spawn args '/home/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',
gyp info spawn args '-Dlibrary=shared_library',
gyp info spawn args '-Dvisibility=default',
gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.22.0',
gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',
gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',
gyp info spawn args '-Dnode_engine=v8',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.'
gyp info spawn args ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
make: Verzeichnis „/opt/iobroker/node_modules/opengpio/build“ wird betreten
  CXX(target) Release/obj.target/opengpio/cpp/opengpio.o
../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’
   14 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   19 |         line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});
      |         ^~~~
      |         gpiod::line
In file included from /usr/include/gpiodcxx/chip.hpp:21,
                 from /usr/include/gpiod.hpp:27,
                 from ../cpp/opengpio.cpp:3:
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’
   19 |         line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});
      |                                                          ^~~~~~~~~~~~~~~
../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
      |                                                              gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured
   30 |         bool value = line.get_value();
      |                      ^~~~
../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                  ^
../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured
   34 |                                                  { line.release(); });
      |                                                    ^~~~
../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default
   33 |     Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                   ^
../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’
   49 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   54 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |         ^~~~
      |         gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’
   54 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |                                                          ^~~~~~~~~~~~~~~~
../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
      |                                                              gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured
   66 |         line.set_value(value); });
      |         ^~~~
../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                  ^
../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured
   69 |                                                  { line.release(); });
      |                                                    ^~~~
../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default
   68 |     Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                   ^
../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: At global scope:
../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type
   81 |     gpiod::line line;
      |            ^~~~
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’
   92 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  100 |         line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);
      |         ^~~~
      |         gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’
  100 |         line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);
      |                                                          ^~~~~~~~~~~~~~~~
../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
      |                                                              gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured
  111 |         bool value = line.get_value();
      |                      ^~~~
../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                  ^
../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’
  115 |     data->line = line;
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’
  127 |             gpiod::line line = data->line;
      |                         ^~~~
../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured
  131 |                 bool hasEvent = line.event_wait(chrono::milliseconds(1));
      |                                 ^~~~
../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default
  124 |         [](uv_work_t *req)
      |          ^
../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?
  134 |                     gpiod::line_event event = line.event_read();
      |                            ^~~~~~~~~~
      |                            info_event
../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?
  135 |                     bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;
      |                                  ^~~~~
      |                                  servent
../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared
  135 |                     bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;
      |                                                             ^~~~~~~~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’
  147 |             data->line.release();
      |                   ^~~~
../cpp/opengpio.cpp: At global scope:
../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type
  168 |     gpiod::line line;
      |            ^~~~
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’
  196 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  201 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |         ^~~~
      |         gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’
  201 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |                                                          ^~~~~~~~~~~~~~~~
../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’
  213 |     data->line = line;
      |           ^~~~
../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  213 |     data->line = line;
      |                  ^~~~
      |                  gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’
  224 |             gpiod::line line = data->line;
      |                         ^~~~
../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured
  264 |                 line.set_value(true);
      |                 ^~~~
../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default
  221 |         [](uv_work_t *req)
      |          ^
../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
  213 |     data->line = line;
      |                  ^~~~
../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured
  278 |                 line.set_value(false);
      |                 ^~~~
../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default
  221 |         [](uv_work_t *req)
      |          ^
../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
  213 |     data->line = line;
      |                  ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’
  327 |             gpiod::line line = data->line;
      |                         ^~~~
../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured
  328 |             line.release();
      |             ^~~~
../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default
  324 |         [](uv_work_t *req, int status)
      |          ^
../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
  213 |     data->line = line;
      |                  ^~~~
make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/opengpio/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)
gyp ERR! System Linux 6.12.62+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v22.22.0
gyp ERR! node-gyp -v v11.2.0
gyp ERR! not ok
npm error code 1
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-02-09T13_47_48_434Z-debug-0.log
gyp info it worked if it ends with ok
gyp info using node-gyp@11.2.0
gyp info using node@22.22.0 | linux | arm64
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args 'binding.gyp',
gyp info spawn args '-f',
gyp info spawn args 'make',
gyp info spawn args '-I',
gyp info spawn args '/opt/iobroker/node_modules/node-dht-sensor/build/config.gypi',
gyp info spawn args '-I',
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args '-I',
gyp info spawn args '/home/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',
gyp info spawn args '-Dlibrary=shared_library',
gyp info spawn args '-Dvisibility=default',
gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.22.0',
gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',
gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/node-dht-sensor',
gyp info spawn args '-Dnode_engine=v8',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.'
gyp info spawn args ]
gyp info ok
gyp info it worked if it ends with ok
gyp info using node-gyp@11.2.0
gyp info using node@22.22.0 | linux | arm64
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args 'binding.gyp',
gyp info spawn args '-f',
gyp info spawn args 'make',
gyp info spawn args '-I',
gyp info spawn args '/opt/iobroker/node_modules/opengpio/build/config.gypi',
gyp info spawn args '-I',
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args '-I',
gyp info spawn args '/home/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',
gyp info spawn args '-Dlibrary=shared_library',
gyp info spawn args '-Dvisibility=default',
gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.22.0',
gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',
gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',
gyp info spawn args '-Dnode_engine=v8',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.'
gyp info spawn args ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’
   14 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   19 |         line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});
      |         ^~~~
      |         gpiod::line
In file included from /usr/include/gpiodcxx/chip.hpp:21,
                 from /usr/include/gpiod.hpp:27,
                 from ../cpp/opengpio.cpp:3:
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’
   19 |         line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});
      |                                                          ^~~~~~~~~~~~~~~
../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
      |                                                              gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured
   30 |         bool value = line.get_value();
      |                      ^~~~
../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                  ^
../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured
   34 |                                                  { line.release(); });
      |                                                    ^~~~
../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default
   33 |     Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                   ^
../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here
   28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’
   49 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   54 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |         ^~~~
      |         gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’
   54 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |                                                          ^~~~~~~~~~~~~~~~
../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
      |                                                              gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured
   66 |         line.set_value(value); });
      |         ^~~~
../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                  ^
../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured
   69 |                                                  { line.release(); });
      |                                                    ^~~~
../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default
   68 |     Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                   ^
../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here
   63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: At global scope:
../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type
   81 |     gpiod::line line;
      |            ^~~~
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’
   92 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  100 |         line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);
      |         ^~~~
      |         gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’
  100 |         line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);
      |                                                          ^~~~~~~~~~~~~~~~
../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
      |                                                              gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured
  111 |         bool value = line.get_value();
      |                      ^~~~
../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                                  ^
../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’
  115 |     data->line = line;
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’
  127 |             gpiod::line line = data->line;
      |                         ^~~~
../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured
  131 |                 bool hasEvent = line.event_wait(chrono::milliseconds(1));
      |                                 ^~~~
../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default
  124 |         [](uv_work_t *req)
      |          ^
../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here
  109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
      |                                                              ^~~~
../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?
  134 |                     gpiod::line_event event = line.event_read();
      |                            ^~~~~~~~~~
      |                            info_event
../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?
  135 |                     bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;
      |                                  ^~~~~
      |                                  servent
../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared
  135 |                     bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;
      |                                                             ^~~~~~~~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’
  147 |             data->line.release();
      |                   ^~~~
../cpp/opengpio.cpp: At global scope:
../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type
  168 |     gpiod::line line;
      |            ^~~~
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:
../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’
  196 |     gpiod::line line = chip.get_line(lineNumber);
      |                 ^~~~
../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  201 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |         ^~~~
      |         gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’
  201 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
      |                                                          ^~~~~~~~~~~~~~~~
../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’
  213 |     data->line = line;
      |           ^~~~
../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
  213 |     data->line = line;
      |                  ^~~~
      |                  gpiod::line
/usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
   24 | namespace line {
      |           ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’
  224 |             gpiod::line line = data->line;
      |                         ^~~~
../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured
  264 |                 line.set_value(true);
      |                 ^~~~
../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default
  221 |         [](uv_work_t *req)
      |          ^
../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
  213 |     data->line = line;
      |                  ^~~~
../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured
  278 |                 line.set_value(false);
      |                 ^~~~
../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default
  221 |         [](uv_work_t *req)
      |          ^
../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
  213 |     data->line = line;
      |                  ^~~~
../cpp/opengpio.cpp: In lambda function:
../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’
  327 |             gpiod::line line = data->line;
      |                         ^~~~
../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured
  328 |             line.release();
      |             ^~~~
../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default
  324 |         [](uv_work_t *req, int status)
      |          ^
../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
  213 |     data->line = line;
      |                  ^~~~
make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Fehler 1
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)
gyp ERR! System Linux 6.12.62+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v22.22.0
gyp ERR! node-gyp -v v11.2.0
gyp ERR! not ok
npm error code 1
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-02-09T13_47_48_434Z-debug-0.log
host.Raspi48GB Cannot install iobroker.rpi2@2.4.0: 1

[Thomas Braun]

@searcher57

Irgendein 'build error'. Sieht irgendwie danach aus:
https://github.com/ExpeditionExploration/opengpio/issues/37

Installier mal die Beta-Version 3.0.2, damit sollte das funktionieren:

latest:	3.0.2 for 70 days
stable:	2.4.0 for 11 months

[searcher57]

Entschuldige kannst Du mir die Befehle geben?