NEWS
Wir empfehlen: Node.js 22.x
-
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Da wird beim userland 32Bit stehen.
Da muss ich dich leider enttäuschen ;-)
*** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: CT101 Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.8.4-3-pve Architecture: x86-64 OS is similar to: model name : AMD Ryzen 5 5560U with Radeon Graphics Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bitIch werd wohl mal das Update über die Konsole probieren.
-
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Zeig mal den Rest.
Scheinbar ist mein "bookworm" auch nicht mehr state of the art.
-
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Zeig mal den Rest.
Scheinbar ist mein "bookworm" auch nicht mehr state of the art.
@JohnDenver0815 said in Wir empfehlen: Node.js 22.x:
Scheinbar ist mein "bookworm" auch nicht mehr state of the art.
Nein, da ist das End Of Life in Sichtweite.
Hampel da nicht als root herum.
Und den netatmo-crawler würde ich etwas weniger agressiv einstellen. Das Wetter ändert sich nicht im Minutentakt.
-
@JohnDenver0815 said in Wir empfehlen: Node.js 22.x:
Scheinbar ist mein "bookworm" auch nicht mehr state of the art.
Nein, da ist das End Of Life in Sichtweite.
Hampel da nicht als root herum.
Und den netatmo-crawler würde ich etwas weniger agressiv einstellen. Das Wetter ändert sich nicht im Minutentakt.
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Hampel da nicht als root herum.
Hab ich dem Diag auch entnommen, gehe ich in Bälde an. Bisher habe ich auf der Konsole nichts getrieben.
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Und den netatmo-crawler würde ich etwas weniger agressiv einstellen. Das Wetter ändert sich nicht im Minutentakt.
Der fragt alle 5 Minuten 3 unterschiedliche Regensensoren in 4km Entfernung ab, deren Wert dann gemittelt wird (nicht jeder hat scheinbar nen optimalen Aufstellungsort gewählt), um meine Bewässerung zu steuern. Kann theoretisch wegen Herbst auch erstmal aus.
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Nein, da ist das End Of Life in Sichtweite.
Erfolgt das Upgrade auf dem Bestandssystem, oder muss ich alles wegsichern, platt machen und komplett neu aufsetzen?
-
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Hampel da nicht als root herum.
Hab ich dem Diag auch entnommen, gehe ich in Bälde an. Bisher habe ich auf der Konsole nichts getrieben.
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Und den netatmo-crawler würde ich etwas weniger agressiv einstellen. Das Wetter ändert sich nicht im Minutentakt.
Der fragt alle 5 Minuten 3 unterschiedliche Regensensoren in 4km Entfernung ab, deren Wert dann gemittelt wird (nicht jeder hat scheinbar nen optimalen Aufstellungsort gewählt), um meine Bewässerung zu steuern. Kann theoretisch wegen Herbst auch erstmal aus.
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Nein, da ist das End Of Life in Sichtweite.
Erfolgt das Upgrade auf dem Bestandssystem, oder muss ich alles wegsichern, platt machen und komplett neu aufsetzen?
@JohnDenver0815 said in Wir empfehlen: Node.js 22.x:
Bisher habe ich auf der Konsole nichts getrieben.
Das ist ja kein Grund.
Erfolgt das Upgrade auf dem Bestandssystem, oder muss ich alles wegsichern, platt machen und komplett neu aufsetzen?
Geht beides. Aber einen Container kann man ja easy draufwerfen.
-
@JohnDenver0815 said in Wir empfehlen: Node.js 22.x:
Bisher habe ich auf der Konsole nichts getrieben.
Das ist ja kein Grund.
Erfolgt das Upgrade auf dem Bestandssystem, oder muss ich alles wegsichern, platt machen und komplett neu aufsetzen?
Geht beides. Aber einen Container kann man ja easy draufwerfen.
@Thomas-Braun said in Wir empfehlen: Node.js 22.x:
Das ist ja kein Grund.
Wollte damit lediglich meine Ahnungslosigkeit unterstreichen. Der Punkt schien im damals verwendeten Tutorial nicht drin gewesen zu sein. Seitdem lief die Kiste und ich war lediglich in der GUI unterwegs. Ich kümmer mich, danke für die Hinweise ;-)
-
Hallo ich wollte heute meine JS Version auf Version 22 updaten und bin nach der Anleitung vorgegangen:
iob stop iob nodejs-update iob fixLeider wird mir zum Abschluss mit dem Befehl
node -vimmernoch die installierte Version:
v20.19.2angezeigt.
Auch ein Neustart der virtuellen Maschine (Proxmox Host) brachte keinen Erfolg.
Den Befehl:iob nodejs-update 22habe ich auch versucht, jedoch mit gleichem Misserfolg.
-
@thomas-braun
Ev. könnte iob nodejs-update ja checken ob es die empfohlene Node.js version aktualisisert hat und wenn nicht eine Fehlermeldung incl. Info zu den häufigesten Problemen (OS Info, ...) ausgeben. Ist aber nur ne Idee um hier rascher dem User Feedback anzubeiten. -
Anbei der output aus iob diag:
[s=] c```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Ubuntu 22.04.5 LTS Static hostname: iobroker-produktiv Icon name: computer-container Chassis: container Virtualization: lxc Kernel: Linux 6.8.12-11-pve Architecture: x86-64 OS is similar to: debian model name : 12th Gen Intel(R) Core(TM) i5-1240P Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 09:41:33 up 16 min, 2 users, load average: 0.86, 0.87, 0.75 CPU threads: 8 *** LIFE CYCLE STATUS *** Operating System codenamed 'jammy' is an aging Ubuntu release! Please upgrade to the latest LTS release 'noble' in due time! *** TIME AND TIMEZONES *** Local time: Wed 2025-12-10 09:41:33 CET Universal time: Wed 2025-12-10 08:41:33 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.3G 6.9G 0.0K 1.0M 6.9G Swap: 0B 0B 0B Total: 8.2G 1.3G 6.9G Active iob-Instances: 4 8192 M total memory 1320 M used memory 1271 M active memory 0 M inactive memory 6870 M free memory 0 M buffer memory 1 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 09:41:33 up 16 min, 2 users, load average: 0.86, 0.87, 0.75 Tasks: 38 total, 1 running, 37 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.7 us, 1.7 sy, 0.0 ni, 93.3 id, 2.5 wa, 0.0 hi, 0.8 si, 0.0 st MiB Mem : 8192.0 total, 6870.9 free, 1319.9 used, 1.2 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 6871.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on rpool/data/subvol-201-disk-0 zfs 60G 11G 50G 18% / none tmpfs 492K 4.0K 488K 1% /dev efivarfs efivarfs 192K 100K 88K 53% /sys/firmware/efi/efivars tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.2G 136K 6.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-sysusers.service tmpfs tmpfs 3.1G 0 3.1G 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / rpool/data/subvol-201-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 1.2G /var/ 830M /var/cache 826M /var/cache/apt 754M /var/cache/apt/archives 197M /var/log Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 3.3M in the file system. /opt/iobroker/backups: 394M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.1G /opt/iobroker/iobroker-data/ 817M /opt/iobroker/iobroker-data/backup-objects 114M /opt/iobroker/iobroker-data/files 67M /opt/iobroker/iobroker-data/history 20M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 41M /opt/iobroker/iobroker-data/states.jsonl 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_07-47_states.jsonl.gz 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_05-47_states.jsonl.gz 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_03-47_states.jsonl.gz 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_01-47_states.jsonl.gz USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.2 /usr/bin/node v20.19.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.2-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages *** 20.19.2-1nodesource1 100 100 /var/lib/dpkg/status 12.22.9~dfsg-1ubuntu3.6 500 500 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages 500 http://archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages 12.22.9~dfsg-1ubuntu3 500 500 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker-produktiv iobroker-produktiv (version: 7.0.7, hostname: iobroker-produktiv, alive, uptime: 16) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 9.0.11 nodejs modules from github: 9 +-- iobroker.bambulab@0.3.4 (git+ssh://git@github.com/DrozmotiX/ioBroker.bambulab.git#1a690a68b4796f7ee6e685ccf85751566682885f) +-- iobroker.cloudless-homeconnect@1.6.3 (git+ssh://git@github.com/eifel-tech/ioBroker.cloudless-homeconnect.git#6d5e4686ff96eef7f617f05d5ac6d4a367ef6a89) +-- iobroker.cups@0.0.1 (git+ssh://git@github.com/felixcrafter54/ioBroker.cups.git#fb94931eb265aac5ba332907b806b5d5a4c573a9) +-- iobroker.devices@1.2.9 (git+ssh://git@github.com/ioBroker/ioBroker.devices.git#9b236f4f0ce18525b8f0418b71e1153f2e9057a6) +-- iobroker.dreamehome@0.1.7 (git+ssh://git@github.com/spayrosam/ioBroker.dreamehome.git#24a7e4a9542cfe1616a50747ec1eaf58bddacdbd) +-- iobroker.jarvis@3.1.9-beta.2 (git+ssh://git@github.com/Zefau/ioBroker.jarvis.git#31ad221a4171597a434fff0b41d75dd7d09d6d6c) +-- iobroker.mercedesme@0.3.8 (git+ssh://git@github.com/TA2k/ioBroker.mercedesme.git#426508912896a6de0257cee3c07f2a3d3b624aa4) +-- iobroker.navimow@0.0.1 (git+ssh://git@github.com/TA2k/ioBroker.navimow.git#f92d4950c454a421747bdab62a34a157f6cf508f) +-- iobroker.schoolfree@1.1.12 (git+ssh://git@github.com/simatec/ioBroker.schoolfree.git#4c820da55212ada269b0008fca1a0b5d117438b5) Adapter State + system.adapter.admin.0 : admin : iobroker-produktiv - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : iobroker-produktiv - enabled system.adapter.alexa2.0 : alexa2 : iobroker-produktiv - enabled system.adapter.alias-manager.0 : alias-manager : iobroker-produktiv - enabled system.adapter.asterisk.0 : asterisk : iobroker-produktiv - enabled, port: 5038 system.adapter.backitup.0 : backitup : iobroker-produktiv - enabled system.adapter.bambulab.1 : bambulab : iobroker-produktiv - enabled, port: 8883 system.adapter.cloudless-homeconnect.0 : cloudless-homeconnect : iobroker-produktiv - enabled system.adapter.cups.0 : cups : iobroker-produktiv - enabled, port: 631 system.adapter.deconz.0 : deconz : iobroker-produktiv - enabled, port: 80 system.adapter.denon.0 : denon : iobroker-produktiv - enabled system.adapter.devices.0 : devices : iobroker-produktiv - enabled system.adapter.dreamehome.0 : dreamehome : iobroker-produktiv - enabled system.adapter.dwd.0 : dwd : iobroker-produktiv - enabled system.adapter.fakeroku.0 : fakeroku : iobroker-produktiv - enabled system.adapter.flot.0 : flot : iobroker-produktiv - disabled system.adapter.fullybrowser.0 : fullybrowser : iobroker-produktiv - enabled system.adapter.govee-local.0 : govee-local : iobroker-produktiv - enabled system.adapter.harmony.0 : harmony : iobroker-produktiv - enabled + system.adapter.history.0 : history : iobroker-produktiv - enabled system.adapter.hue.0 : hue : iobroker-produktiv - enabled, port: 80 system.adapter.ical.0 : ical : iobroker-produktiv - enabled system.adapter.iot.0 : iot : iobroker-produktiv - enabled system.adapter.iqontrol.0 : iqontrol : iobroker-produktiv - enabled system.adapter.jarvis.0 : jarvis : iobroker-produktiv - enabled + system.adapter.javascript.0 : javascript : iobroker-produktiv - enabled system.adapter.linux-control.0 : linux-control : iobroker-produktiv - enabled system.adapter.logparser.0 : logparser : iobroker-produktiv - enabled system.adapter.mercedesme.0 : mercedesme : iobroker-produktiv - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker-produktiv - disabled, port: 54321 system.adapter.mobile.0 : mobile : iobroker-produktiv - disabled system.adapter.mqtt.0 : mqtt : iobroker-produktiv - enabled, port: 1884, bind: 0.0.0.0 system.adapter.philips-tv.0 : philips-tv : iobroker-produktiv - enabled system.adapter.ping.0 : ping : iobroker-produktiv - enabled system.adapter.proxmox.0 : proxmox : iobroker-produktiv - enabled, port: 8006 system.adapter.pushover.0 : pushover : iobroker-produktiv - enabled system.adapter.pushover.1 : pushover : iobroker-produktiv - enabled system.adapter.pushover.2 : pushover : iobroker-produktiv - enabled system.adapter.reolink.0 : reolink : iobroker-produktiv - enabled system.adapter.roborock.0 : roborock : iobroker-produktiv - enabled system.adapter.schoolfree.0 : schoolfree : iobroker-produktiv - enabled system.adapter.shelly.0 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.1 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : iobroker-produktiv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : iobroker-produktiv - enabled, port: 1883, bind: 0.0.0.0 system.adapter.spotify-premium.0 : spotify-premium : iobroker-produktiv - disabled system.adapter.text2command.0 : text2command : iobroker-produktiv - enabled system.adapter.tr-064.0 : tr-064 : iobroker-produktiv - disabled system.adapter.trashschedule.0 : trashschedule : iobroker-produktiv - enabled system.adapter.tuya.0 : tuya : iobroker-produktiv - enabled system.adapter.unifi.0 : unifi : iobroker-produktiv - enabled system.adapter.vis.0 : vis : iobroker-produktiv - enabled system.adapter.web.0 : web : iobroker-produktiv - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.wled.0 : wled : iobroker-produktiv - enabled system.adapter.yahka.0 : yahka : iobroker-produktiv - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-produktiv - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.asterisk.0 : asterisk : iobroker-produktiv - enabled, port: 5038 system.adapter.bambulab.1 : bambulab : iobroker-produktiv - enabled, port: 8883 system.adapter.cups.0 : cups : iobroker-produktiv - enabled, port: 631 system.adapter.deconz.0 : deconz : iobroker-produktiv - enabled, port: 80 system.adapter.hue.0 : hue : iobroker-produktiv - enabled, port: 80 system.adapter.mqtt.0 : mqtt : iobroker-produktiv - enabled, port: 1884, bind: 0.0.0.0 system.adapter.proxmox.0 : proxmox : iobroker-produktiv - enabled, port: 8006 system.adapter.shelly.0 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.1 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : iobroker-produktiv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : iobroker-produktiv - enabled, port: 1883, bind: 0.0.0.0 system.adapter.web.0 : web : iobroker-produktiv - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "alarm" : 3.7.6 , installed 3.7.6 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "asterisk" : 2.0.3 , installed 2.0.3 Adapter "backitup" : 3.3.10 , installed 3.3.10 Adapter "deconz" : 1.6.4 , installed 1.6.4 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "devices" : 1.2.8 , installed 1.2.9 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fakeroku" : 0.3.0 , installed 0.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "govee-local" : 0.4.5 , installed 0.4.5 Adapter "harmony" : 1.5.0 , installed 1.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "ical" : 1.18.1 , installed 1.18.1 Adapter "iot" : 5.0.7 , installed 5.0.7 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.9-beta.2 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "logparser" : 2.4.0 , installed 2.4.0 Adapter "mihome-vacuum": 5.2.0 , installed 5.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "openligadb" : 1.9.1 , installed 1.9.1 Adapter "philips-tv" : 0.5.4 , installed 0.5.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "proxmox" : 2.4.0 , installed 2.4.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "schoolfree" : 1.1.12 , installed 1.1.12 Adapter "shelly" : 10.4.1 , installed 10.4.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "spotify-premium": 1.5.2 , installed 1.5.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Objects and States Please stand by - This may take a while Objects: 22676 States: 17722 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease Hit:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu jammy-security InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution). Pending Updates: *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 106 1201080859 101/systemd-resolve tcp 0 0 192.168.123.100:9093 0.0.0.0:* LISTEN 1000 1201197253 2260/io.fakeroku.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 1201090704 385/master tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 1201083964 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1201086801 158/sshd: /usr/sbin tcp 0 0 0.0.0.0:5038 0.0.0.0:* LISTEN 113 1201086821 127/asterisk tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 1201185692 1676/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 1201185672 1676/iobroker.js-co tcp6 0 0 :::61991 :::* LISTEN 1000 1201193411 2342/io.harmony.0 tcp6 0 0 :::111 :::* LISTEN 0 1201083966 1/init tcp6 0 0 :::22 :::* LISTEN 0 1201086803 158/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 1201090705 385/master tcp6 0 0 :::8081 :::* LISTEN 1000 1201183418 1695/io.admin.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 1201197254 2260/io.fakeroku.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 1201183741 2188/io.deconz.0 udp 0 0 0.0.0.0:4569 0.0.0.0:* 113 1201086834 127/asterisk udp 0 0 0.0.0.0:5060 0.0.0.0:* 113 1201086835 127/asterisk udp 0 0 0.0.0.0:58911 0.0.0.0:* 113 1201084188 127/asterisk udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 1201193412 2342/io.harmony.0 udp 0 0 127.0.0.53:53 0.0.0.0:* 106 1201080858 101/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1201083965 1/init udp 0 0 192.168.123.100:123 0.0.0.0:* 0 1201080887 149/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 1201080885 149/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 1201080881 149/ntpd udp6 0 0 :::1900 :::* 1000 1201183742 2188/io.deconz.0 udp6 0 0 :::51428 :::* 113 1201084189 127/asterisk udp6 0 0 :::111 :::* 0 1201083967 1/init udp6 0 0 fe80::1058:ecff:fe7:123 :::* 112 1201092692 149/ntpd udp6 0 0 ::1:123 :::* 0 1201080889 149/ntpd udp6 0 0 :::123 :::* 0 1201080878 149/ntpd *** Log File - Last 25 Lines *** 2025-12-10 09:41:29.036 - error: roborock.0 (1855) Error in getUserData: Login returned empty userdata.. This is most likely due to too many reconnects. 2025-12-10 09:41:29.041 - error: roborock.0 (1855) Error retrieving or setting clientID: Error: Login returned empty userdata. at Roborock.getUserData (/opt/iobroker/node_modules/iobroker.roborock/main.js:236:11) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Roborock.initializeRoborockApi (/opt/iobroker/node_modules/iobroker.roborock/main.js:103:21) at Roborock.onReady (/opt/iobroker/node_modules/iobroker.roborock/main.js:65:34) 2025-12-10 09:41:29.228 - error: roborock.0 (1855) Failed to get home details: Error: loginApi is not initialized. at Roborock.initializeHomeDetails (/opt/iobroker/node_modules/iobroker.roborock/main.js:144:25) at Roborock.onReady (/opt/iobroker/node_modules/iobroker.roborock/main.js:67:14) 2025-12-10 09:41:32.238 - info: host.iobroker-produktiv instance system.adapter.alarm.0 in version "3.7.6" started with pid 1891 2025-12-10 09:41:32.802 - info: alarm.0 (1891) starting. Version 3.7.6 in /opt/iobroker/node_modules/iobroker.alarm, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:36.209 - info: host.iobroker-produktiv instance system.adapter.alexa2.0 in version "3.27.4" started with pid 2111 2025-12-10 09:41:36.779 - info: alexa2.0 (2111) starting. Version 3.27.4 in /opt/iobroker/node_modules/iobroker.alexa2, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:36.795 - info: alexa2.0 (2111) Starting Alexa2 adapter ... it can take several minutes to initialize all data. Please be patient! A done message is logged. 2025-12-10 09:41:36.796 - info: alexa2.0 (2111) Update Device State Interval is too low, set to 349s 2025-12-10 09:41:39.914 - info: alexa2.0 (2111) Initialize all Device states ... 2025-12-10 09:41:40.207 - info: host.iobroker-produktiv instance system.adapter.deconz.0 in version "1.6.4" started with pid 2188 2025-12-10 09:41:40.721 - info: deconz.0 (2188) starting. Version 1.6.4 in /opt/iobroker/node_modules/iobroker.deconz, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:40.744 - info: deconz.0 (2188) deConz Version: 2.30.2; API version: 1.16.0 2025-12-10 09:41:44.255 - info: host.iobroker-produktiv instance system.adapter.fakeroku.0 in version "0.3.0" started with pid 2260 2025-12-10 09:41:44.775 - info: fakeroku.0 (2260) starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.fakeroku, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:48.216 - info: host.iobroker-produktiv instance system.adapter.fullybrowser.0 in version "3.1.2" started with pid 2291 2025-12-10 09:41:52.235 - info: host.iobroker-produktiv instance system.adapter.harmony.0 in version "1.5.0" started with pid 2342 2025-12-10 09:41:52.803 - info: harmony.0 (2342) starting. Version 1.5.0 in /opt/iobroker/node_modules/iobroker.harmony, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:52.814 - info: harmony.0 (2342) [DISCOVER] Searching for Harmony Hubs on 255.255.255.255============ Mark until here for C&P =============
iob diag has finished.
-
Ubuntu 22 basiert auf Debian Buster - wenn ich richtig informiert bin.
Kann gut sein, dass da der node.js 22 Support reichlich dünn ist. Buster selbst ist seit Mitte 2024(!) EOL und daher nicht mehr supported.@thomas-braun wird das sicher fundiert beantworten können...
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer Danke sagen will, kann nen Kaffee spendieren: https://paypal.me/mcm1957atiobroker
-
Ubuntu 22 basiert auf Debian Buster - wenn ich richtig informiert bin.
Kann gut sein, dass da der node.js 22 Support reichlich dünn ist. Buster selbst ist seit Mitte 2024(!) EOL und daher nicht mehr supported.@thomas-braun wird das sicher fundiert beantworten können...
@mcm1957 22.04 ist Jammy, und bekommt bis Juni 2027 noch (Sicherheits-)Updates.
https://ubuntu.com/about/release-cycleUnd würde auch noch von nodeJS mit Version 22 (und 24) unterstützt:
https://nodesource.com/products/distributionsZumindest wird da nichts rot wenn ich mir Node.js, Ubuntu und 22.04 zusammenklicke
Also eigentlich sollte das noch gehen. Aber bevor man das mit Gewalt drauf bügelt, sollte man schauen warum das über
iobnicht will. -
Anbei der output aus iob diag:
[s=] c```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Ubuntu 22.04.5 LTS Static hostname: iobroker-produktiv Icon name: computer-container Chassis: container Virtualization: lxc Kernel: Linux 6.8.12-11-pve Architecture: x86-64 OS is similar to: debian model name : 12th Gen Intel(R) Core(TM) i5-1240P Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 09:41:33 up 16 min, 2 users, load average: 0.86, 0.87, 0.75 CPU threads: 8 *** LIFE CYCLE STATUS *** Operating System codenamed 'jammy' is an aging Ubuntu release! Please upgrade to the latest LTS release 'noble' in due time! *** TIME AND TIMEZONES *** Local time: Wed 2025-12-10 09:41:33 CET Universal time: Wed 2025-12-10 08:41:33 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.3G 6.9G 0.0K 1.0M 6.9G Swap: 0B 0B 0B Total: 8.2G 1.3G 6.9G Active iob-Instances: 4 8192 M total memory 1320 M used memory 1271 M active memory 0 M inactive memory 6870 M free memory 0 M buffer memory 1 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 09:41:33 up 16 min, 2 users, load average: 0.86, 0.87, 0.75 Tasks: 38 total, 1 running, 37 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.7 us, 1.7 sy, 0.0 ni, 93.3 id, 2.5 wa, 0.0 hi, 0.8 si, 0.0 st MiB Mem : 8192.0 total, 6870.9 free, 1319.9 used, 1.2 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 6871.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on rpool/data/subvol-201-disk-0 zfs 60G 11G 50G 18% / none tmpfs 492K 4.0K 488K 1% /dev efivarfs efivarfs 192K 100K 88K 53% /sys/firmware/efi/efivars tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.2G 136K 6.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-sysusers.service tmpfs tmpfs 3.1G 0 3.1G 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / rpool/data/subvol-201-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 1.2G /var/ 830M /var/cache 826M /var/cache/apt 754M /var/cache/apt/archives 197M /var/log Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 3.3M in the file system. /opt/iobroker/backups: 394M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.1G /opt/iobroker/iobroker-data/ 817M /opt/iobroker/iobroker-data/backup-objects 114M /opt/iobroker/iobroker-data/files 67M /opt/iobroker/iobroker-data/history 20M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 41M /opt/iobroker/iobroker-data/states.jsonl 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_07-47_states.jsonl.gz 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_05-47_states.jsonl.gz 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_03-47_states.jsonl.gz 26M /opt/iobroker/iobroker-data/backup-objects/2025-12-10_01-47_states.jsonl.gz USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.2 /usr/bin/node v20.19.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.2-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages *** 20.19.2-1nodesource1 100 100 /var/lib/dpkg/status 12.22.9~dfsg-1ubuntu3.6 500 500 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages 500 http://archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages 12.22.9~dfsg-1ubuntu3 500 500 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker-produktiv iobroker-produktiv (version: 7.0.7, hostname: iobroker-produktiv, alive, uptime: 16) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 9.0.11 nodejs modules from github: 9 +-- iobroker.bambulab@0.3.4 (git+ssh://git@github.com/DrozmotiX/ioBroker.bambulab.git#1a690a68b4796f7ee6e685ccf85751566682885f) +-- iobroker.cloudless-homeconnect@1.6.3 (git+ssh://git@github.com/eifel-tech/ioBroker.cloudless-homeconnect.git#6d5e4686ff96eef7f617f05d5ac6d4a367ef6a89) +-- iobroker.cups@0.0.1 (git+ssh://git@github.com/felixcrafter54/ioBroker.cups.git#fb94931eb265aac5ba332907b806b5d5a4c573a9) +-- iobroker.devices@1.2.9 (git+ssh://git@github.com/ioBroker/ioBroker.devices.git#9b236f4f0ce18525b8f0418b71e1153f2e9057a6) +-- iobroker.dreamehome@0.1.7 (git+ssh://git@github.com/spayrosam/ioBroker.dreamehome.git#24a7e4a9542cfe1616a50747ec1eaf58bddacdbd) +-- iobroker.jarvis@3.1.9-beta.2 (git+ssh://git@github.com/Zefau/ioBroker.jarvis.git#31ad221a4171597a434fff0b41d75dd7d09d6d6c) +-- iobroker.mercedesme@0.3.8 (git+ssh://git@github.com/TA2k/ioBroker.mercedesme.git#426508912896a6de0257cee3c07f2a3d3b624aa4) +-- iobroker.navimow@0.0.1 (git+ssh://git@github.com/TA2k/ioBroker.navimow.git#f92d4950c454a421747bdab62a34a157f6cf508f) +-- iobroker.schoolfree@1.1.12 (git+ssh://git@github.com/simatec/ioBroker.schoolfree.git#4c820da55212ada269b0008fca1a0b5d117438b5) Adapter State + system.adapter.admin.0 : admin : iobroker-produktiv - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : iobroker-produktiv - enabled system.adapter.alexa2.0 : alexa2 : iobroker-produktiv - enabled system.adapter.alias-manager.0 : alias-manager : iobroker-produktiv - enabled system.adapter.asterisk.0 : asterisk : iobroker-produktiv - enabled, port: 5038 system.adapter.backitup.0 : backitup : iobroker-produktiv - enabled system.adapter.bambulab.1 : bambulab : iobroker-produktiv - enabled, port: 8883 system.adapter.cloudless-homeconnect.0 : cloudless-homeconnect : iobroker-produktiv - enabled system.adapter.cups.0 : cups : iobroker-produktiv - enabled, port: 631 system.adapter.deconz.0 : deconz : iobroker-produktiv - enabled, port: 80 system.adapter.denon.0 : denon : iobroker-produktiv - enabled system.adapter.devices.0 : devices : iobroker-produktiv - enabled system.adapter.dreamehome.0 : dreamehome : iobroker-produktiv - enabled system.adapter.dwd.0 : dwd : iobroker-produktiv - enabled system.adapter.fakeroku.0 : fakeroku : iobroker-produktiv - enabled system.adapter.flot.0 : flot : iobroker-produktiv - disabled system.adapter.fullybrowser.0 : fullybrowser : iobroker-produktiv - enabled system.adapter.govee-local.0 : govee-local : iobroker-produktiv - enabled system.adapter.harmony.0 : harmony : iobroker-produktiv - enabled + system.adapter.history.0 : history : iobroker-produktiv - enabled system.adapter.hue.0 : hue : iobroker-produktiv - enabled, port: 80 system.adapter.ical.0 : ical : iobroker-produktiv - enabled system.adapter.iot.0 : iot : iobroker-produktiv - enabled system.adapter.iqontrol.0 : iqontrol : iobroker-produktiv - enabled system.adapter.jarvis.0 : jarvis : iobroker-produktiv - enabled + system.adapter.javascript.0 : javascript : iobroker-produktiv - enabled system.adapter.linux-control.0 : linux-control : iobroker-produktiv - enabled system.adapter.logparser.0 : logparser : iobroker-produktiv - enabled system.adapter.mercedesme.0 : mercedesme : iobroker-produktiv - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker-produktiv - disabled, port: 54321 system.adapter.mobile.0 : mobile : iobroker-produktiv - disabled system.adapter.mqtt.0 : mqtt : iobroker-produktiv - enabled, port: 1884, bind: 0.0.0.0 system.adapter.philips-tv.0 : philips-tv : iobroker-produktiv - enabled system.adapter.ping.0 : ping : iobroker-produktiv - enabled system.adapter.proxmox.0 : proxmox : iobroker-produktiv - enabled, port: 8006 system.adapter.pushover.0 : pushover : iobroker-produktiv - enabled system.adapter.pushover.1 : pushover : iobroker-produktiv - enabled system.adapter.pushover.2 : pushover : iobroker-produktiv - enabled system.adapter.reolink.0 : reolink : iobroker-produktiv - enabled system.adapter.roborock.0 : roborock : iobroker-produktiv - enabled system.adapter.schoolfree.0 : schoolfree : iobroker-produktiv - enabled system.adapter.shelly.0 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.1 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : iobroker-produktiv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : iobroker-produktiv - enabled, port: 1883, bind: 0.0.0.0 system.adapter.spotify-premium.0 : spotify-premium : iobroker-produktiv - disabled system.adapter.text2command.0 : text2command : iobroker-produktiv - enabled system.adapter.tr-064.0 : tr-064 : iobroker-produktiv - disabled system.adapter.trashschedule.0 : trashschedule : iobroker-produktiv - enabled system.adapter.tuya.0 : tuya : iobroker-produktiv - enabled system.adapter.unifi.0 : unifi : iobroker-produktiv - enabled system.adapter.vis.0 : vis : iobroker-produktiv - enabled system.adapter.web.0 : web : iobroker-produktiv - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.wled.0 : wled : iobroker-produktiv - enabled system.adapter.yahka.0 : yahka : iobroker-produktiv - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-produktiv - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.asterisk.0 : asterisk : iobroker-produktiv - enabled, port: 5038 system.adapter.bambulab.1 : bambulab : iobroker-produktiv - enabled, port: 8883 system.adapter.cups.0 : cups : iobroker-produktiv - enabled, port: 631 system.adapter.deconz.0 : deconz : iobroker-produktiv - enabled, port: 80 system.adapter.hue.0 : hue : iobroker-produktiv - enabled, port: 80 system.adapter.mqtt.0 : mqtt : iobroker-produktiv - enabled, port: 1884, bind: 0.0.0.0 system.adapter.proxmox.0 : proxmox : iobroker-produktiv - enabled, port: 8006 system.adapter.shelly.0 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.1 : shelly : iobroker-produktiv - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : iobroker-produktiv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : iobroker-produktiv - enabled, port: 1883, bind: 0.0.0.0 system.adapter.web.0 : web : iobroker-produktiv - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "alarm" : 3.7.6 , installed 3.7.6 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "asterisk" : 2.0.3 , installed 2.0.3 Adapter "backitup" : 3.3.10 , installed 3.3.10 Adapter "deconz" : 1.6.4 , installed 1.6.4 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "devices" : 1.2.8 , installed 1.2.9 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fakeroku" : 0.3.0 , installed 0.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "govee-local" : 0.4.5 , installed 0.4.5 Adapter "harmony" : 1.5.0 , installed 1.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "ical" : 1.18.1 , installed 1.18.1 Adapter "iot" : 5.0.7 , installed 5.0.7 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.9-beta.2 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "logparser" : 2.4.0 , installed 2.4.0 Adapter "mihome-vacuum": 5.2.0 , installed 5.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "openligadb" : 1.9.1 , installed 1.9.1 Adapter "philips-tv" : 0.5.4 , installed 0.5.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "proxmox" : 2.4.0 , installed 2.4.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "schoolfree" : 1.1.12 , installed 1.1.12 Adapter "shelly" : 10.4.1 , installed 10.4.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "spotify-premium": 1.5.2 , installed 1.5.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Objects and States Please stand by - This may take a while Objects: 22676 States: 17722 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease Hit:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu jammy-security InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution). Pending Updates: *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 106 1201080859 101/systemd-resolve tcp 0 0 192.168.123.100:9093 0.0.0.0:* LISTEN 1000 1201197253 2260/io.fakeroku.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 1201090704 385/master tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 1201083964 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1201086801 158/sshd: /usr/sbin tcp 0 0 0.0.0.0:5038 0.0.0.0:* LISTEN 113 1201086821 127/asterisk tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 1201185692 1676/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 1201185672 1676/iobroker.js-co tcp6 0 0 :::61991 :::* LISTEN 1000 1201193411 2342/io.harmony.0 tcp6 0 0 :::111 :::* LISTEN 0 1201083966 1/init tcp6 0 0 :::22 :::* LISTEN 0 1201086803 158/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 1201090705 385/master tcp6 0 0 :::8081 :::* LISTEN 1000 1201183418 1695/io.admin.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 1201197254 2260/io.fakeroku.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 1201183741 2188/io.deconz.0 udp 0 0 0.0.0.0:4569 0.0.0.0:* 113 1201086834 127/asterisk udp 0 0 0.0.0.0:5060 0.0.0.0:* 113 1201086835 127/asterisk udp 0 0 0.0.0.0:58911 0.0.0.0:* 113 1201084188 127/asterisk udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 1201193412 2342/io.harmony.0 udp 0 0 127.0.0.53:53 0.0.0.0:* 106 1201080858 101/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1201083965 1/init udp 0 0 192.168.123.100:123 0.0.0.0:* 0 1201080887 149/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 1201080885 149/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 1201080881 149/ntpd udp6 0 0 :::1900 :::* 1000 1201183742 2188/io.deconz.0 udp6 0 0 :::51428 :::* 113 1201084189 127/asterisk udp6 0 0 :::111 :::* 0 1201083967 1/init udp6 0 0 fe80::1058:ecff:fe7:123 :::* 112 1201092692 149/ntpd udp6 0 0 ::1:123 :::* 0 1201080889 149/ntpd udp6 0 0 :::123 :::* 0 1201080878 149/ntpd *** Log File - Last 25 Lines *** 2025-12-10 09:41:29.036 - error: roborock.0 (1855) Error in getUserData: Login returned empty userdata.. This is most likely due to too many reconnects. 2025-12-10 09:41:29.041 - error: roborock.0 (1855) Error retrieving or setting clientID: Error: Login returned empty userdata. at Roborock.getUserData (/opt/iobroker/node_modules/iobroker.roborock/main.js:236:11) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Roborock.initializeRoborockApi (/opt/iobroker/node_modules/iobroker.roborock/main.js:103:21) at Roborock.onReady (/opt/iobroker/node_modules/iobroker.roborock/main.js:65:34) 2025-12-10 09:41:29.228 - error: roborock.0 (1855) Failed to get home details: Error: loginApi is not initialized. at Roborock.initializeHomeDetails (/opt/iobroker/node_modules/iobroker.roborock/main.js:144:25) at Roborock.onReady (/opt/iobroker/node_modules/iobroker.roborock/main.js:67:14) 2025-12-10 09:41:32.238 - info: host.iobroker-produktiv instance system.adapter.alarm.0 in version "3.7.6" started with pid 1891 2025-12-10 09:41:32.802 - info: alarm.0 (1891) starting. Version 3.7.6 in /opt/iobroker/node_modules/iobroker.alarm, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:36.209 - info: host.iobroker-produktiv instance system.adapter.alexa2.0 in version "3.27.4" started with pid 2111 2025-12-10 09:41:36.779 - info: alexa2.0 (2111) starting. Version 3.27.4 in /opt/iobroker/node_modules/iobroker.alexa2, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:36.795 - info: alexa2.0 (2111) Starting Alexa2 adapter ... it can take several minutes to initialize all data. Please be patient! A done message is logged. 2025-12-10 09:41:36.796 - info: alexa2.0 (2111) Update Device State Interval is too low, set to 349s 2025-12-10 09:41:39.914 - info: alexa2.0 (2111) Initialize all Device states ... 2025-12-10 09:41:40.207 - info: host.iobroker-produktiv instance system.adapter.deconz.0 in version "1.6.4" started with pid 2188 2025-12-10 09:41:40.721 - info: deconz.0 (2188) starting. Version 1.6.4 in /opt/iobroker/node_modules/iobroker.deconz, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:40.744 - info: deconz.0 (2188) deConz Version: 2.30.2; API version: 1.16.0 2025-12-10 09:41:44.255 - info: host.iobroker-produktiv instance system.adapter.fakeroku.0 in version "0.3.0" started with pid 2260 2025-12-10 09:41:44.775 - info: fakeroku.0 (2260) starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.fakeroku, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:48.216 - info: host.iobroker-produktiv instance system.adapter.fullybrowser.0 in version "3.1.2" started with pid 2291 2025-12-10 09:41:52.235 - info: host.iobroker-produktiv instance system.adapter.harmony.0 in version "1.5.0" started with pid 2342 2025-12-10 09:41:52.803 - info: harmony.0 (2342) starting. Version 1.5.0 in /opt/iobroker/node_modules/iobroker.harmony, node: v20.19.2, js-controller: 7.0.7 2025-12-10 09:41:52.814 - info: harmony.0 (2342) [DISCOVER] Searching for Harmony Hubs on 255.255.255.255============ Mark until here for C&P =============
iob diag has finished.
iob nodejs-update hat alles richtig gemacht und das korrekte Repo angelegt.
Allerdings ist deine Paketdatenbank korrupt und deswegen können da keine Updates eingespielt werden, auch kein aktuelles nodejs.Entsprechende Meldungen müssen auch in der Ausgabe von nodejs-update aufgetaucht sein, genauso wie es im Output von iob diag ja auch drin steht.
sudo apt updatesagt?
-
iob nodejs-update hat alles richtig gemacht und das korrekte Repo angelegt.
Allerdings ist deine Paketdatenbank korrupt und deswegen können da keine Updates eingespielt werden, auch kein aktuelles nodejs.Entsprechende Meldungen müssen auch in der Ausgabe von nodejs-update aufgetaucht sein, genauso wie es im Output von iob diag ja auch drin steht.
sudo apt updatesagt?
@Thomas-Braun das ist die Anzeige des Befehls
sudo apt update:pi@iobroker-produktiv:~$ sudo apt update Hit:1 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 142 packages can be upgraded. Run 'apt list --upgradable' to see them. pi@iobroker-produktiv:~$ -
@Thomas-Braun das ist die Anzeige des Befehls
sudo apt update:pi@iobroker-produktiv:~$ sudo apt update Hit:1 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 142 packages can be upgraded. Run 'apt list --upgradable' to see them. pi@iobroker-produktiv:~$ -
pi@iobroker-produktiv:~$ sudo apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: libllvm13 Use 'sudo apt autoremove' to remove it. Get more security updates through Ubuntu Pro with 'esm-apps' enabled: libzvbi-common liburiparser1 libopusfile0 libavdevice58 ffmpeg libpostproc55 libavcodec58 libavutil56 libswscale5 libswresample3 libavformat58 libzvbi0 libavfilter7 Learn more about Ubuntu Pro at https://ubuntu.com/pro The following NEW packages will be installed: libxcb-randr0 ubuntu-pro-client ubuntu-pro-client-l10n The following packages will be upgraded: apparmor apt apt-utils bind9-dnsutils bind9-host bind9-libs binutils binutils-common binutils-x86-64-linux-gnu cifs-utils cpp-10 cpp-11 curl dirmngr distro-info-data dpkg dpkg-dev g++-11 gcc-10 gcc-10-base gcc-11 gcc-11-base gcc-12-base gir1.2-gdkpixbuf-2.0 git git-man gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv iputils-ping iputils-tracepath libapparmor1 libapt-pkg6.0 libarchive13 libasan6 libatomic1 libavahi-client-dev libavahi-client3 libavahi-common-data libavahi-common-dev libavahi-common3 libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libbinutils libc-bin libc-dev-bin libc6 libc6-dev libcc1-0 libctf-nobfd0 libctf0 libcurl3-gnutls libcurl4 libdpkg-perl libgbm1 libgcc-10-dev libgcc-11-dev libgcc-s1 libgdk-pixbuf-2.0-0 libgdk-pixbuf-2.0-dev libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgfortran5 libgl1-amber-dri libgl1-mesa-dri libglapi-mesa libglib2.0-0 libglib2.0-bin libglib2.0-data libglib2.0-dev libglib2.0-dev-bin libglx-mesa0 libgnutls30 libgomp1 libgssapi-krb5-2 libitm1 libk5crypto3 libkrb5-3 libkrb5support0 liblsan0 libnss-systemd libopenjp2-7 libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpam0g-dev libperl5.34 libpq5 libpython3.10-minimal libpython3.10-stdlib libquadmath0 libsqlite3-0 libssh-4 libssh-gcrypt-4 libssl3 libstdc++-11-dev libstdc++6 libsystemd0 libtiff-dev libtiff5 libtiffxx5 libtsan0 libubsan1 libudev-dev libudev1 libunbound8 libvpx7 libwbclient0 libxml2 libxslt1.1 linux-libc-dev locales net-tools nodejs openssl perl perl-base perl-modules-5.34 powermgmt-base python-apt-common python3-apt python3-pkg-resources python3-update-manager python3.10 python3.10-minimal sudo systemd systemd-hwe-hwdb systemd-sysv tzdata ubuntu-advantage-tools udev update-manager-core 142 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 105 standard LTS security updates Need to get 204 MB of archives. After this operation, 45.3 MB of additional disk space will be used. Do you want to continue? [Y/n] -
pi@iobroker-produktiv:~$ sudo apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: libllvm13 Use 'sudo apt autoremove' to remove it. Get more security updates through Ubuntu Pro with 'esm-apps' enabled: libzvbi-common liburiparser1 libopusfile0 libavdevice58 ffmpeg libpostproc55 libavcodec58 libavutil56 libswscale5 libswresample3 libavformat58 libzvbi0 libavfilter7 Learn more about Ubuntu Pro at https://ubuntu.com/pro The following NEW packages will be installed: libxcb-randr0 ubuntu-pro-client ubuntu-pro-client-l10n The following packages will be upgraded: apparmor apt apt-utils bind9-dnsutils bind9-host bind9-libs binutils binutils-common binutils-x86-64-linux-gnu cifs-utils cpp-10 cpp-11 curl dirmngr distro-info-data dpkg dpkg-dev g++-11 gcc-10 gcc-10-base gcc-11 gcc-11-base gcc-12-base gir1.2-gdkpixbuf-2.0 git git-man gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv iputils-ping iputils-tracepath libapparmor1 libapt-pkg6.0 libarchive13 libasan6 libatomic1 libavahi-client-dev libavahi-client3 libavahi-common-data libavahi-common-dev libavahi-common3 libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libbinutils libc-bin libc-dev-bin libc6 libc6-dev libcc1-0 libctf-nobfd0 libctf0 libcurl3-gnutls libcurl4 libdpkg-perl libgbm1 libgcc-10-dev libgcc-11-dev libgcc-s1 libgdk-pixbuf-2.0-0 libgdk-pixbuf-2.0-dev libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgfortran5 libgl1-amber-dri libgl1-mesa-dri libglapi-mesa libglib2.0-0 libglib2.0-bin libglib2.0-data libglib2.0-dev libglib2.0-dev-bin libglx-mesa0 libgnutls30 libgomp1 libgssapi-krb5-2 libitm1 libk5crypto3 libkrb5-3 libkrb5support0 liblsan0 libnss-systemd libopenjp2-7 libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpam0g-dev libperl5.34 libpq5 libpython3.10-minimal libpython3.10-stdlib libquadmath0 libsqlite3-0 libssh-4 libssh-gcrypt-4 libssl3 libstdc++-11-dev libstdc++6 libsystemd0 libtiff-dev libtiff5 libtiffxx5 libtsan0 libubsan1 libudev-dev libudev1 libunbound8 libvpx7 libwbclient0 libxml2 libxslt1.1 linux-libc-dev locales net-tools nodejs openssl perl perl-base perl-modules-5.34 powermgmt-base python-apt-common python3-apt python3-pkg-resources python3-update-manager python3.10 python3.10-minimal sudo systemd systemd-hwe-hwdb systemd-sysv tzdata ubuntu-advantage-tools udev update-manager-core 142 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 105 standard LTS security updates Need to get 204 MB of archives. After this operation, 45.3 MB of additional disk space will be used. Do you want to continue? [Y/n]@DarkDevil sagte in Wir empfehlen: Node.js 22.x:
Do you want to continue? [Y/n]
Ja, willst du.
Und das ganze künftig selber und regelmäßig machen. -
Kiste mal ordentlich neugestartet?
Die anderen Meldungen aus iob diag solltest du auch angehen.
Operating System codenamed 'jammy' is an aging Ubuntu release! Please upgrade to the latest LTS release 'noble' in due time!
System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'
Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.
543
Online32.6k
Benutzer81.9k
Themen1.3m
Beiträge