NEWS
Octoprint und Webcam
Plauderecke
40
Beiträge
3
Kommentatoren
1.2k
Aufrufe
3
Watching
-
#!/bin/sh tool=/usr/bin/rpicam-hello # bookworm [ -e "$tool" ] || tool=/usr/bin/libcamera-hello # bullseye $tool --list-cameras | grep -o '/base/soc/[^)]*' || exit -1 -
pi@OctoprintEnder:~ $ sudo systemctl status camera-streamer-libcamera.service ○ camera-streamer-libcamera.service - camera-streamer libcamera Loaded: loaded (/etc/systemd/system/camera-streamer-libcamera.service; disabled; preset: enabled) Drop-In: /etc/systemd/system/camera-streamer-libcamera.service.d └─override.conf Active: inactive (dead) (Result: exec-condition) since Wed 2025-10-22 07:48:02 CEST; 1min 2s ago Condition: start condition failed at Wed 2025-10-22 07:48:02 CEST; 1min 2s ago Process: 2189 ExecCondition=/usr/bin/list-libcamera-devices (code=exited, status=1/FAILURE) CPU: 73ms Okt 22 07:48:02 OctoprintEnder systemd[1]: Starting camera-streamer-libcamera.service - camera-streamer libcamera... Okt 22 07:48:02 OctoprintEnder systemd[1]: camera-streamer-libcamera.service: Skipped due to 'exec-condition'. Okt 22 07:48:02 OctoprintEnder systemd[1]: Condition check resulted in camera-streamer-libcamera.service - camera-streamer libcamera being skipped. -
pi@OctoprintEnder:~ $ sudo systemctl status camera-streamer-libcamera.service ○ camera-streamer-libcamera.service - camera-streamer libcamera Loaded: loaded (/etc/systemd/system/camera-streamer-libcamera.service; disabled; preset: enabled) Drop-In: /etc/systemd/system/camera-streamer-libcamera.service.d └─override.conf Active: inactive (dead) (Result: exec-condition) since Wed 2025-10-22 07:48:02 CEST; 1min 2s ago Condition: start condition failed at Wed 2025-10-22 07:48:02 CEST; 1min 2s ago Process: 2189 ExecCondition=/usr/bin/list-libcamera-devices (code=exited, status=1/FAILURE) CPU: 73ms Okt 22 07:48:02 OctoprintEnder systemd[1]: Starting camera-streamer-libcamera.service - camera-streamer libcamera... Okt 22 07:48:02 OctoprintEnder systemd[1]: camera-streamer-libcamera.service: Skipped due to 'exec-condition'. Okt 22 07:48:02 OctoprintEnder systemd[1]: Condition check resulted in camera-streamer-libcamera.service - camera-streamer libcamera being skipped. -
pi@OctoprintEnder:~ $ ls -l /usr/bin/list-libcamera-devices -rwxr-xr-x 1 root root 170 22. Okt 07:47 /usr/bin/list-libcamera-devices -
pi@OctoprintEnder:~ $ ls -l /dev/video* crw-rw----+ 1 root video 81, 17 13. Okt 09:29 /dev/video0 crw-rw----+ 1 root video 81, 18 13. Okt 09:29 /dev/video1 crw-rw----+ 1 root video 81, 2 13. Okt 09:29 /dev/video19 crw-rw----+ 1 root video 81, 19 13. Okt 09:29 /dev/video2 crw-rw----+ 1 root video 81, 0 13. Okt 09:29 /dev/video20 crw-rw----+ 1 root video 81, 1 13. Okt 09:29 /dev/video21 crw-rw----+ 1 root video 81, 3 13. Okt 09:29 /dev/video22 crw-rw----+ 1 root video 81, 4 13. Okt 09:29 /dev/video23 crw-rw----+ 1 root video 81, 5 13. Okt 09:29 /dev/video24 crw-rw----+ 1 root video 81, 6 13. Okt 09:29 /dev/video25 crw-rw----+ 1 root video 81, 7 13. Okt 09:29 /dev/video26 crw-rw----+ 1 root video 81, 8 13. Okt 09:29 /dev/video27 crw-rw----+ 1 root video 81, 9 13. Okt 09:29 /dev/video28 crw-rw----+ 1 root video 81, 10 13. Okt 09:29 /dev/video29 crw-rw----+ 1 root video 81, 20 13. Okt 09:29 /dev/video3 crw-rw----+ 1 root video 81, 11 13. Okt 09:29 /dev/video30 crw-rw----+ 1 root video 81, 12 13. Okt 09:29 /dev/video31 crw-rw----+ 1 root video 81, 13 13. Okt 09:29 /dev/video32 crw-rw----+ 1 root video 81, 14 13. Okt 09:29 /dev/video33 crw-rw----+ 1 root video 81, 15 13. Okt 09:29 /dev/video34 crw-rw----+ 1 root video 81, 16 13. Okt 09:29 /dev/video35 crw-rw----+ 1 root video 81, 21 13. Okt 09:29 /dev/video4 crw-rw----+ 1 root video 81, 22 13. Okt 09:29 /dev/video5 crw-rw----+ 1 root video 81, 23 13. Okt 09:29 /dev/video6 crw-rw----+ 1 root video 81, 24 13. Okt 09:29 /dev/video7 -
Wenn die Kamera defekt wäre ging dann das hier?
pi@OctoprintEnder:~ $ rpicam-vid -t 0 --inline --listen -o tcp://0.0.0.0:8554 [0:25:37.894262256] [3031] INFO Camera camera_manager.cpp:330 libcamera v0.5.2+99-bfd68f78 [0:25:37.908162545] [3036] INFO RPI pisp.cpp:720 libpisp version v1.2.1 981977ff21f3 29-04-2025 (14:17:26) [0:25:37.918079664] [3036] INFO IPAProxy ipa_proxy.cpp:180 Using tuning file /usr/share/libcamera/ipa/rpi/pisp/imx219.json [0:25:37.932915342] [3036] INFO Camera camera_manager.cpp:220 Adding camera '/base/axi/pcie@1000120000/rp1/i2c@80000/imx219@10' for pipeline handler rpi/pisp [0:25:37.932966323] [3036] INFO RPI pisp.cpp:1179 Registered camera /base/axi/pcie@1000120000/rp1/i2c@80000/imx219@10 to CFE device /dev/media0 and ISP device /dev/media2 using PiSP variant BCM2712_C0 Made X/EGL preview window Made DRM preview window Preview window unavailable Mode selection for 640:480:12:P SRGGB10_CSI2P,640x480/0 - Score: 1000 SRGGB10_CSI2P,1640x1232/0 - Score: 1444.49 SRGGB10_CSI2P,1920x1080/0 - Score: 1636.67 SRGGB10_CSI2P,3280x2464/0 - Score: 2162.49 SRGGB8,640x480/0 - Score: 2000 SRGGB8,1640x1232/0 - Score: 2444.49 SRGGB8,1920x1080/0 - Score: 2636.67 SRGGB8,3280x2464/0 - Score: 3162.49 Stream configuration adjusted [0:25:38.029040176] [3031] INFO Camera camera.cpp:1215 configuring streams: (0) 640x480-YUV420/SMPTE170M (1) 640x480-BGGR_PISP_COMP1/RAW [0:25:38.029161361] [3036] INFO RPI pisp.cpp:1483 Sensor: /base/axi/pcie@1000120000/rp1/i2c@80000/imx219@10 - Selected sensor format: 640x480-SBGGR10_1X10/RAW - Selected CFE format: 640x480-PC1B/RAW [libx264 @ 0x9c93b0] using cpu capabilities: ARMv6 NEON [libx264 @ 0x9c93b0] profile High, level 3.0, 4:2:0, 8-bit Output #0, h264, to 'tcp://0.0.0.0:8554?listen=1': Stream #0:0: Video: h264, yuv420p(tv, smpte170m/smpte170m/bt709), 640x480, q=2-31, 30 fps, 30 tbr, 1000k tbn #7 (0.00 fps) exp 33251.00 ag 9.85 dg 1.02 #8 (30.00 fps) exp 33251.00 ag 9.48 dg 1.04 #9 (30.01 fps) exp 33251.00 ag 9.48 dg 1.04 #10 (30.00 fps) exp 33251.00 ag 9.85 dg 1.02 #11 (30.01 fps) exp 33251.00 ag 9.85 dg 1.02 #12 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 #13 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #14 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 #15 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #16 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #17 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #18 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 #19 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #20 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #21 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 -
Wenn die Kamera defekt wäre ging dann das hier?
pi@OctoprintEnder:~ $ rpicam-vid -t 0 --inline --listen -o tcp://0.0.0.0:8554 [0:25:37.894262256] [3031] INFO Camera camera_manager.cpp:330 libcamera v0.5.2+99-bfd68f78 [0:25:37.908162545] [3036] INFO RPI pisp.cpp:720 libpisp version v1.2.1 981977ff21f3 29-04-2025 (14:17:26) [0:25:37.918079664] [3036] INFO IPAProxy ipa_proxy.cpp:180 Using tuning file /usr/share/libcamera/ipa/rpi/pisp/imx219.json [0:25:37.932915342] [3036] INFO Camera camera_manager.cpp:220 Adding camera '/base/axi/pcie@1000120000/rp1/i2c@80000/imx219@10' for pipeline handler rpi/pisp [0:25:37.932966323] [3036] INFO RPI pisp.cpp:1179 Registered camera /base/axi/pcie@1000120000/rp1/i2c@80000/imx219@10 to CFE device /dev/media0 and ISP device /dev/media2 using PiSP variant BCM2712_C0 Made X/EGL preview window Made DRM preview window Preview window unavailable Mode selection for 640:480:12:P SRGGB10_CSI2P,640x480/0 - Score: 1000 SRGGB10_CSI2P,1640x1232/0 - Score: 1444.49 SRGGB10_CSI2P,1920x1080/0 - Score: 1636.67 SRGGB10_CSI2P,3280x2464/0 - Score: 2162.49 SRGGB8,640x480/0 - Score: 2000 SRGGB8,1640x1232/0 - Score: 2444.49 SRGGB8,1920x1080/0 - Score: 2636.67 SRGGB8,3280x2464/0 - Score: 3162.49 Stream configuration adjusted [0:25:38.029040176] [3031] INFO Camera camera.cpp:1215 configuring streams: (0) 640x480-YUV420/SMPTE170M (1) 640x480-BGGR_PISP_COMP1/RAW [0:25:38.029161361] [3036] INFO RPI pisp.cpp:1483 Sensor: /base/axi/pcie@1000120000/rp1/i2c@80000/imx219@10 - Selected sensor format: 640x480-SBGGR10_1X10/RAW - Selected CFE format: 640x480-PC1B/RAW [libx264 @ 0x9c93b0] using cpu capabilities: ARMv6 NEON [libx264 @ 0x9c93b0] profile High, level 3.0, 4:2:0, 8-bit Output #0, h264, to 'tcp://0.0.0.0:8554?listen=1': Stream #0:0: Video: h264, yuv420p(tv, smpte170m/smpte170m/bt709), 640x480, q=2-31, 30 fps, 30 tbr, 1000k tbn #7 (0.00 fps) exp 33251.00 ag 9.85 dg 1.02 #8 (30.00 fps) exp 33251.00 ag 9.48 dg 1.04 #9 (30.01 fps) exp 33251.00 ag 9.48 dg 1.04 #10 (30.00 fps) exp 33251.00 ag 9.85 dg 1.02 #11 (30.01 fps) exp 33251.00 ag 9.85 dg 1.02 #12 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 #13 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #14 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 #15 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #16 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #17 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #18 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 #19 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #20 (30.00 fps) exp 33251.00 ag 8.83 dg 1.03 #21 (30.01 fps) exp 33251.00 ag 8.83 dg 1.03 -
@michaelf ahh ok.. das ding liefert schon mal Bild..
und aktiviert hast du di im octoprint ?
-
Ist der User in der Gruppe Video drin?
Und wie sehen die Rechte vollständig aus?
Da liegt ja ein ACL drauf. -
Ist der User in der Gruppe Video drin?
Und wie sehen die Rechte vollständig aus?
Da liegt ja ein ACL drauf.Hi, da brauch ich etwas Unterstützung mein "Linux" ist nicht sooooooooo ausgeprägt.....
-
@michaelf ein adblocker vielleicht ? in Browser .. oder pfsense oder ad blah... was weiss ich
Nein, leider auch nicht.
Also ich habe noch ein weiteren Drucker mit der gleichen Kamera wo die Installation Problemlos ging wie in einen Howto von Octoprint beschrieben.
Der unterschied ein älteres OS und ein Pi3, das hier ist ein Pi5 mit neustem Image von Octoprint.
Das Problem gibt es anscheinend öfter wenn man in Google danach sucht.
-
Nein, leider auch nicht.
Also ich habe noch ein weiteren Drucker mit der gleichen Kamera wo die Installation Problemlos ging wie in einen Howto von Octoprint beschrieben.
Der unterschied ein älteres OS und ein Pi3, das hier ist ein Pi5 mit neustem Image von Octoprint.
Das Problem gibt es anscheinend öfter wenn man in Google danach sucht.
-
All Raspberry Pi boards with a camera connector use the same installation method, though the Raspberry Pi 5 and all Raspberry Pi Zero models require a different camera cable.
Und zwar dieses:
https://www.raspberrypi.com/products/camera-cable/Quelle:
https://www.raspberrypi.com/documentation/accessories/camera.htm
Das würde auch erklären, warum es am Raspberry3 funktioniert.
-
All Raspberry Pi boards with a camera connector use the same installation method, though the Raspberry Pi 5 and all Raspberry Pi Zero models require a different camera cable.
Und zwar dieses:
https://www.raspberrypi.com/products/camera-cable/Quelle:
https://www.raspberrypi.com/documentation/accessories/camera.htm
Das würde auch erklären, warum es am Raspberry3 funktioniert.
Support us
743
Online32.5k
Benutzer81.6k
Themen1.3m
Beiträge