UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[simatec]

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

@simatec
Hm.. müsste ich das dann abends machen? Manuell klingt so, als ob die dann gar nicht mehr automatisch fahren? Oder heißt das nur, dass sie die Zeit ignorieren?

Du kannst den jeweiligen Rollladen für up, down und sunprotect getrennt auf Manuel schalten

Ich hab auch noch ein Problem... ich würde gerne, dass sie bei Regen hoch fahren (0%) und bei nicht Regen wieder weiter mit Verschattung machen. Mein Regensensor meldet periodisch seinen Zustand, also da folgt auf "false" ca. ne halbe Stunde später nochmal "false". Irgendwie veranlasst das den Adapter aber dazu die Rolladen auf 100% zu stellen. Also Änderung von false -> false -> Rolladen wird auf 100% gefahren (shuttercontrol.0: Alarm rain end Set ID: Rolladen Hof 1 value: 100% steht im log). Eingestellt ist 0% als Ziel bei Regenalarm.

Am sinnvollsten wäre hier ein State, der nur auf Änderungen reagiert und nicht auf Aktualisierungen

Ich verstehe nicht ganz, wo die 100% herkommt. Vorher hat der Adapter schon entschieden, dass nun gut ist mit Verschattung (shuttercontrol.0: Sunprotect #422 Set ID: Rolladen Hof 1 value: 0%, stand vorher im Log). Das hat dann dazu geführt, dass er munter Rolladen rauf und runter gefahren hat... Ansonsten wäre 100% schon das Ziel bei Verschattung.

Am besten du postet mal deine Config...

Ist der Alarm nicht dazu verwendbar, die Rolladen bei Regen hochzufahren und danach weitermachen zu lassen mit der Verschattung?

Der sollte dafür schon nutzbar sein

[Garfonso]

@simatec said in Test Adapter shuttercontrol v2.0.x:

Du kannst den jeweiligen Rollladen für up, down und sunprotect getrennt auf Manuel schalten

Ja, das hab ich mittlerweile verstanden. Im Tab war mir das dann klar. Danke. :-)

Was mir noch helfen würde, wäre, wenn der Adapter im Tab sagen könnte, warum der Rolladen gerade fährt. Da steht häufig nur "up"... das sehe ich.. wüsste gerne warum. Gerade sind die Rollanden für mich nicht nachvollziehbar wieder rauf und runter gefahren. Im Log stand auch nichts, was mir wirklich geholfen hätte, rauszufinden, warum.

Hier meine Config:
system.adapter.shuttercontrol.0.json

Es sind 7 Rolladen, die im Prinzip, bis auf die Tür-Sensoren, identisch konfiguriert sein sollen. Endziel wäre, bei Sonne runterfahren, bei Tür öffnen rauffahren und wenn die Tür zu geht, wieder runter. Bei Regen rauffahren.
Es gibt auch noch zwei Helligkeitssensoren, die ich einbinden könnte, aber da ich bisher noch nicht klar komme, hab ich die auch erstmal rausgelassen. Auch den Regenalarm hab ich erstmal rausgenommen.

[Homoran]

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

Im Log stand auch nichts, was mir wirklich geholfen hätte

dann zeig's doch uns!

[Garfonso]

@homoran

Hab die Config wieder um Luminance und Regenalarm erweitert, da heute dunkel war und regnerisch... das ging tagsüber ganz ok, aber um 18:44 Uhr hat der Adapter wieder entschieden, dass er die Rolladen nun runter fahren muss. Dabei ist das automatische Fahren außer für Sonnenschutz deaktiviert (soweit ich das bisher verstehe).
system.adapter.shuttercontrol.0.json

log dazu:

Spoiler

2025-10-07 18:40:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 18:40:00.003  - debug: shuttercontrol.0 (2739274) Sun Azimut: 258.8°
2025-10-07 18:40:00.003  - debug: shuttercontrol.0 (2739274) Sun Elevation: 1.9°
2025-10-07 18:41:05.314  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 92
2025-10-07 18:41:15.314  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 18:44:00.006  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.006  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.006  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.006  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.006  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 1
2025-10-07 18:44:00.006  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.007  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 18:44:00.007  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.007  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_1.position: false
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 2
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.008  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_2.position: false
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 3
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.009  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_3.position: false
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 4
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.010  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_4.position: false
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 5
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.011  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_5.position: false
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 6
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_6.position: false
2025-10-07 18:44:00.012  - debug: shuttercontrol.0 (2739274) check in time 01.03. 30.09.
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) Start Sat Mar 01 2025
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) End Tue Sep 30 2025
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) we are not in period, after start Sat Mar 01 2025 and before end Tue Sep 30 2025
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) check xmas for Rolladen Hof 7
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) start checking frost alarm
2025-10-07 18:44:00.013  - debug: shuttercontrol.0 (2739274) status frost alarm for alias.0.blinds.Hof_7.position: false
2025-10-07 18:44:52.725  - debug: shuttercontrol.0 (2739274) Alarm Rain changed: false
2025-10-07 18:44:52.725  - debug: shuttercontrol.0 (2739274) start shutterAlarm
2025-10-07 18:44:52.725  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:44:52.726  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 18:44:52.726  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 1 value: 100%
2025-10-07 18:44:52.727  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:44:52.728  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 old height: 0% new height: 100%
2025-10-07 18:44:52.728  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:44:52.737  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:44:52.738  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 1 old value = 0% | new value = 100%
2025-10-07 18:44:52.738  - debug: shuttercontrol.0 (2739274) Rolladen Hof 1 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:44:52.739  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:44:52.739  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 1 old value = 0% | new value = 100%
2025-10-07 18:44:52.739  - debug: shuttercontrol.0 (2739274) Rolladen Hof 1 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 18:45:00.002  - debug: shuttercontrol.0 (2739274) Sun Azimut: 259.7°
2025-10-07 18:45:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: 1.1°
2025-10-07 18:45:02.728  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:45:02.729  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 18:45:02.730  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 2 value: 100%
2025-10-07 18:45:02.731  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:02.732  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:02.733  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 old height: 0% new height: 100%
2025-10-07 18:45:02.742  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:02.742  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:02.743  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 2 old value = 0% | new value = 100%
2025-10-07 18:45:02.743  - debug: shuttercontrol.0 (2739274) Rolladen Hof 2 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:02.749  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 2 old value = 0% | new value = 100%
2025-10-07 18:45:02.749  - debug: shuttercontrol.0 (2739274) Rolladen Hof 2 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:12.733  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:45:12.734  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 18:45:12.735  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 3 value: 100%
2025-10-07 18:45:12.736  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:12.736  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 old height: 0% new height: 100%
2025-10-07 18:45:12.745  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:12.746  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 3 old value = 0% | new value = 100%
2025-10-07 18:45:12.746  - debug: shuttercontrol.0 (2739274) Rolladen Hof 3 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:22.737  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:45:22.738  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 18:45:22.738  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 4 value: 100%
2025-10-07 18:45:22.739  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:22.740  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 old height: 0% new height: 100%
2025-10-07 18:45:22.749  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:22.750  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 4 old value = 0% | new value = 100%
2025-10-07 18:45:22.750  - debug: shuttercontrol.0 (2739274) Rolladen Hof 4 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:22.781  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:22.792  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:22.792  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 4 old value = 0% | new value = 100%
2025-10-07 18:45:22.792  - debug: shuttercontrol.0 (2739274) Rolladen Hof 4 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:32.741  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:45:32.742  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 18:45:32.743  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 5 value: 100%
2025-10-07 18:45:32.744  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:32.745  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 old height: 0% new height: 100%
2025-10-07 18:45:32.754  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:32.754  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 5 old value = 0% | new value = 100%
2025-10-07 18:45:32.754  - debug: shuttercontrol.0 (2739274) Rolladen Hof 5 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:32.786  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:32.795  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:32.796  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 5 old value = 0% | new value = 100%
2025-10-07 18:45:32.796  - debug: shuttercontrol.0 (2739274) Rolladen Hof 5 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:42.745  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:45:42.745  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 18:45:42.746  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 6 value: 100%
2025-10-07 18:45:42.747  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:42.747  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 6 old height: 0% new height: 100%
2025-10-07 18:45:42.757  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:42.757  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 6 old value = 0% | new value = 100%
2025-10-07 18:45:42.757  - debug: shuttercontrol.0 (2739274) Rolladen Hof 6 Old value = 0% | New value = 100% | automatic is active
2025-10-07 18:45:52.747  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:45:52.748  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 18:45:52.749  - info: shuttercontrol.0 (2739274) Alarm rain end Set ID: Rolladen Hof 7 value: 100%
2025-10-07 18:45:52.750  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check started
2025-10-07 18:45:52.750  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 old height: 40% new height: 100%
2025-10-07 18:45:52.760  - debug: shuttercontrol.0 (2739274) #0 wait for shutter check end
2025-10-07 18:45:52.761  - debug: shuttercontrol.0 (2739274) Shutter state changed: Rolladen Hof 7 old value = 40% | new value = 100%
2025-10-07 18:45:52.761  - debug: shuttercontrol.0 (2739274) Rolladen Hof 7 Old value = 40% | New value = 100% | automatic is active
2025-10-07 18:46:08.769  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 110
2025-10-07 18:46:18.769  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 18:46:18.769  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 110lux
2025-10-07 18:48:44.353  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 88
2025-10-07 18:48:54.354  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 18:48:54.354  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 88lux
2025-10-07 18:50:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 18:50:00.002  - debug: shuttercontrol.0 (2739274) Sun Azimut: 260.7°
2025-10-07 18:50:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: 0.3°
2025-10-07 18:54:44.372  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 70
2025-10-07 18:54:52.772  - debug: shuttercontrol.0 (2739274) Alarm Rain changed: false
2025-10-07 18:54:52.772  - debug: shuttercontrol.0 (2739274) start shutterAlarm
2025-10-07 18:54:52.772  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:54:52.773  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 18:54:52.775  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 already at: 100% - setting current action: down
2025-10-07 18:54:54.372  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 18:54:54.372  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 70lux
2025-10-07 18:55:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 18:55:00.002  - debug: shuttercontrol.0 (2739274) Sun Azimut: 261.7°
2025-10-07 18:55:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -0.4°
2025-10-07 18:55:02.775  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:55:02.776  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 18:55:02.777  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 already at: 100% - setting current action: down
2025-10-07 18:55:12.778  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:55:12.779  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 18:55:12.780  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 already at: 100% - setting current action: down
2025-10-07 18:55:22.781  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:55:22.782  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 18:55:22.784  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 already at: 100% - setting current action: down
2025-10-07 18:55:32.784  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:55:32.785  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 18:55:32.787  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 already at: 100% - setting current action: down
2025-10-07 18:55:42.786  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:55:42.787  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 18:55:42.789  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 6 already at: 100% - setting current action: down
2025-10-07 18:55:52.791  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 18:55:52.792  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 18:55:52.793  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 already at: 100% - setting current action: down
2025-10-07 18:56:28.825  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 56
2025-10-07 18:56:38.825  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:00:00.003  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:00:00.004  - debug: shuttercontrol.0 (2739274) Sun Azimut: 262.6°
2025-10-07 19:00:00.004  - debug: shuttercontrol.0 (2739274) Sun Elevation: -1.2°
2025-10-07 19:00:23.628  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 45
2025-10-07 19:00:33.628  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:00:33.628  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 45lux
2025-10-07 19:01:31.137  - debug: shuttercontrol.0 (2739274) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 16.14°C
2025-10-07 19:02:50.498  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 36
2025-10-07 19:03:00.498  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:04:18.556  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 29
2025-10-07 19:04:28.558  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:04:28.558  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 29lux
2025-10-07 19:04:52.834  - debug: shuttercontrol.0 (2739274) Alarm Rain changed: false
2025-10-07 19:04:52.834  - debug: shuttercontrol.0 (2739274) start shutterAlarm
2025-10-07 19:04:52.835  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:04:52.835  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 19:04:52.836  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 already at: 100% - setting current action: down
2025-10-07 19:05:00.001  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:05:00.001  - debug: shuttercontrol.0 (2739274) Sun Azimut: 263.6°
2025-10-07 19:05:00.001  - debug: shuttercontrol.0 (2739274) Sun Elevation: -2°
2025-10-07 19:05:02.837  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:05:02.838  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 19:05:02.839  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 already at: 100% - setting current action: down
2025-10-07 19:05:12.839  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:05:12.840  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 19:05:12.841  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 already at: 100% - setting current action: down
2025-10-07 19:05:22.842  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:05:22.843  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 19:05:22.844  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 already at: 100% - setting current action: down
2025-10-07 19:05:32.845  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:05:32.846  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 19:05:32.847  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 already at: 100% - setting current action: down
2025-10-07 19:05:42.847  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:05:42.848  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 19:05:42.849  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 6 already at: 100% - setting current action: down
2025-10-07 19:05:52.850  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:05:52.851  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 19:05:52.852  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 already at: 100% - setting current action: down
2025-10-07 19:06:05.217  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 23
2025-10-07 19:06:15.217  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:06:52.776  - debug: shuttercontrol.0 (2739274) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 16.16°C
2025-10-07 19:06:56.607  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 21
2025-10-07 19:07:06.609  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:07:06.609  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 21lux
2025-10-07 19:08:16.762  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 17
2025-10-07 19:08:26.763  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:09:42.584  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 14
2025-10-07 19:09:52.584  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:09:52.584  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 14lux
2025-10-07 19:10:00.001  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:10:00.001  - debug: shuttercontrol.0 (2739274) Sun Azimut: 264.6°
2025-10-07 19:10:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -2.8°
2025-10-07 19:11:13.902  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 11
2025-10-07 19:11:23.902  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:12:25.695  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 9
2025-10-07 19:12:35.697  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:12:35.697  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 9lux
2025-10-07 19:13:49.453  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 7
2025-10-07 19:13:59.454  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:14:52.905  - debug: shuttercontrol.0 (2739274) Alarm Rain changed: false
2025-10-07 19:14:52.905  - debug: shuttercontrol.0 (2739274) start shutterAlarm
2025-10-07 19:14:52.905  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:14:52.906  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 19:14:52.907  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 already at: 100% - setting current action: down
2025-10-07 19:15:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:15:00.002  - debug: shuttercontrol.0 (2739274) Sun Azimut: 265.5°
2025-10-07 19:15:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -3.6°
2025-10-07 19:15:02.908  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:15:02.909  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 19:15:02.910  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 already at: 100% - setting current action: down
2025-10-07 19:15:12.910  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:15:12.911  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 19:15:12.912  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 already at: 100% - setting current action: down
2025-10-07 19:15:22.913  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:15:22.914  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 19:15:22.916  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 already at: 100% - setting current action: down
2025-10-07 19:15:32.917  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:15:32.918  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 19:15:32.919  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 already at: 100% - setting current action: down
2025-10-07 19:15:42.920  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:15:42.921  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 19:15:42.922  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 6 already at: 100% - setting current action: down
2025-10-07 19:15:52.923  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:15:52.924  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 19:15:52.927  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 already at: 100% - setting current action: down
2025-10-07 19:16:19.564  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 5
2025-10-07 19:16:29.564  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:16:29.564  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 5lux
2025-10-07 19:16:36.480  - debug: shuttercontrol.0 (2739274) TriggerID changed: alias.0.openStates.Esszimmer_Schiebetuer.open | Value: true
2025-10-07 19:16:58.494  - debug: shuttercontrol.0 (2739274) TriggerID changed: alias.0.openStates.Esszimmer_Schiebetuer.open | Value: false
2025-10-07 19:19:44.035  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 3
2025-10-07 19:19:54.035  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:19:54.035  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 3lux
2025-10-07 19:20:00.001  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:20:00.001  - debug: shuttercontrol.0 (2739274) Sun Azimut: 266.5°
2025-10-07 19:20:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -4.4°
2025-10-07 19:24:52.971  - debug: shuttercontrol.0 (2739274) Alarm Rain changed: false
2025-10-07 19:24:52.971  - debug: shuttercontrol.0 (2739274) start shutterAlarm
2025-10-07 19:24:52.971  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:24:52.971  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 19:24:52.972  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 already at: 100% - setting current action: down
2025-10-07 19:25:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:25:00.002  - debug: shuttercontrol.0 (2739274) Sun Azimut: 267.4°
2025-10-07 19:25:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -5.2°
2025-10-07 19:25:02.973  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:25:02.974  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 19:25:02.975  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 already at: 100% - setting current action: down
2025-10-07 19:25:12.976  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:25:12.976  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 19:25:12.978  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 already at: 100% - setting current action: down
2025-10-07 19:25:22.978  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:25:22.979  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 19:25:22.980  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 already at: 100% - setting current action: down
2025-10-07 19:25:32.981  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:25:32.981  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 19:25:32.983  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 already at: 100% - setting current action: down
2025-10-07 19:25:42.983  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:25:42.985  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 19:25:42.986  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 6 already at: 100% - setting current action: down
2025-10-07 19:25:52.987  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:25:52.988  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 19:25:52.989  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 already at: 100% - setting current action: down
2025-10-07 19:29:56.260  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 1
2025-10-07 19:30:00.003  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:30:00.003  - debug: shuttercontrol.0 (2739274) Sun Azimut: 268.4°
2025-10-07 19:30:00.003  - debug: shuttercontrol.0 (2739274) Sun Elevation: -6°
2025-10-07 19:30:06.260  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:30:06.260  - debug: shuttercontrol.0 (2739274) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 1lux
2025-10-07 19:34:53.037  - debug: shuttercontrol.0 (2739274) Alarm Rain changed: false
2025-10-07 19:34:53.037  - debug: shuttercontrol.0 (2739274) start shutterAlarm
2025-10-07 19:34:53.037  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:34:53.038  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-07 19:34:53.039  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 already at: 100% - setting current action: down
2025-10-07 19:35:00.001  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:35:00.001  - debug: shuttercontrol.0 (2739274) Sun Azimut: 269.4°
2025-10-07 19:35:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -6.8°
2025-10-07 19:35:03.041  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:35:03.041  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-07 19:35:03.043  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 already at: 100% - setting current action: down
2025-10-07 19:35:13.044  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:35:13.045  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-07 19:35:13.046  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 already at: 100% - setting current action: down
2025-10-07 19:35:23.047  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:35:23.048  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-07 19:35:23.050  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 already at: 100% - setting current action: down
2025-10-07 19:35:33.050  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:35:33.051  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-07 19:35:33.052  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 already at: 100% - setting current action: down
2025-10-07 19:35:43.053  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:35:43.054  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-07 19:35:43.055  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 6 already at: 100% - setting current action: down
2025-10-07 19:35:53.056  - debug: shuttercontrol.0 (2739274) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-07 19:35:53.057  - debug: shuttercontrol.0 (2739274) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-07 19:35:53.059  - debug: shuttercontrol.0 (2739274) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 already at: 100% - setting current action: down
2025-10-07 19:36:52.793  - debug: shuttercontrol.0 (2739274) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 16.11°C
2025-10-07 19:36:56.620  - debug: shuttercontrol.0 (2739274) Brightness sensor value: 1
2025-10-07 19:37:06.620  - debug: shuttercontrol.0 (2739274) Brightness State Down is: true
2025-10-07 19:40:00.002  - debug: shuttercontrol.0 (2739274) calculate astrodata ...
2025-10-07 19:40:00.002  - debug: shuttercontrol.0 (2739274) Sun Azimut: 270.3°
2025-10-07 19:40:00.002  - debug: shuttercontrol.0 (2739274) Sun Elevation: -7.6°

So siehts im Tab aus:

[Garfonso]

@garfonso

Hab grad gedacht, der Adapter hat gemerkt, dass ich hier schimpfe, eben ging alles hoch... aber anscheinend hat der Regensensor ausgelöst. Das geht zumindest. :-)

[Homoran]

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

Hab die Config wieder um Luminance und Regenalarm erweitert,

heisst was genau?

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

aber um 18:44 Uhr hat der Adapter wieder entschieden, dass er die Rolladen nun runter fahren muss

dann wird deine Helligkeitsgrenze unterschritten worden sein.

2025-10-07 18:41:05.314 - debug: shuttercontrol.0 (2739274) Brightness sensor value: 92

2025-10-07 18:41:15.314 - debug: shuttercontrol.0 (2739274) Brightness State Down is: true

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

Dabei ist das automatische Fahren außer für Sonnenschutz deaktiviert (soweit ich das bisher verstehe).

puuh.
Ist das auch für die nächtliche Verdunklung gültig?

[simatec]

@garfonso Stell doch mal die Automatik für up und down aus, wenn du nur Sonnenschutz willst

[Garfonso]

@simatec
an wie vielen Stellen muss man das denn abstellen? puh
Was steuert denn dann da im Tab das "Automatische Schließung/Öffnung" bei den Rolladen?

[Homoran]

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

Was steuert denn dann da im Tab das "Automatische Schließung/Öffnung" bei den Rolladen?

deswegen ja das "puuuh"
Meines Wissens ist das für die Tür- Fenstersensoren beim Öffnen und Schließen von Tür oder Fenster

[simatec]

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

an wie vielen Stellen muss man das denn abstellen? puh
Was steuert denn dann da im Tab das "Automatische Schließung/Öffnung" bei den Rolladen?

Es reicht im Tab auszuschalten... Die Schalter im Tab steuern direkt die States unter control.down usw....
Es wäre Sinnvoll zu prüfen, warum deine Rollläden fahren... Am besten Debuglog anschalten und prüfen, was die Auslöser sind.

[Garfonso]

@homoran said in Test Adapter shuttercontrol v2.0.x:

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

Was steuert denn dann da im Tab das "Automatische Schließung/Öffnung" bei den Rolladen?

deswegen ja das "puuuh"
Meines Wissens ist das für die Tür- Fenstersensoren beim Öffnen und Schließen von Tür oder Fenster

Auf den Tür/Fenster Sensor reagiert der Rollladen auch, wenn die Schalter auf "aus" stehen.

@simatec said in Test Adapter shuttercontrol v2.0.x:

@garfonso sagte in Test Adapter shuttercontrol v2.0.x:

an wie vielen Stellen muss man das denn abstellen? puh
Was steuert denn dann da im Tab das "Automatische Schließung/Öffnung" bei den Rolladen?

Es reicht im Tab auszuschalten... Die Schalter im Tab steuern direkt die States unter control.down usw....
Es wäre Sinnvoll zu prüfen, warum deine Rollläden fahren... Am besten Debuglog anschalten und prüfen, was die Auslöser sind.

Naja, da stand halt 'aus', wie im Screenshot. schulterzuck Aber hab das jetzt geändert in der Rolladenkonfiguration.

Irgendwas passt da mit dem Regen-Alarm aber nicht, IHMO... Kann es sein, dass da eine Race-Condition ist? Gerade wieder runter/rauf/runter:

2025-10-09 14:52:33.903  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 1 value: 100%
2025-10-09 14:52:43.907  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 2 value: 100%
2025-10-09 14:52:53.911  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 3 value: 100%
2025-10-09 14:53:03.915  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 4 value: 100%
2025-10-09 14:53:13.919  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 5 value: 100%
2025-10-09 14:53:33.925  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 7 value: 100%
2025-10-09 14:55:04.476  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 1 value: 0%
2025-10-09 14:55:14.480  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 2 value: 0%
2025-10-09 14:55:24.483  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 3 value: 0%
2025-10-09 14:55:34.488  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 4 value: 0%
2025-10-09 14:55:44.491  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 5 value: 0%
2025-10-09 14:56:04.496  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 7 value: 0%
2025-10-09 14:56:06.074  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 1 value: 100%
2025-10-09 14:56:16.078  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 2 value: 100%
2025-10-09 14:56:26.081  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 3 value: 100%
2025-10-09 14:56:36.085  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 4 value: 100%
2025-10-09 14:56:46.089  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 5 value: 100%
2025-10-09 14:57:06.094  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 7 value: 100%

Also Sunprotect sagt runter, dann kommt kurz danach vom Regensensor ein "false" (war vorher auch false, wie gesagt, der meldet zyklisch), dann fahren alle wieder auf 0%... warum 0%? Wo saugt er sich das aus den Fingern, dass dann 0% sein muss? Und kurz darauf sagt das Sunprotect wieder ist hell genug und warm genug (was es die ganze Zeit war) -> runter mit euch... (Rolladen 6 fährt korrekterweise nicht, weil da die Tür offen ist).

Hier das vollständige Debug log (config: system.adapter.shuttercontrol.0.json )

Spoiler

2025-10-09 14:50:00.002  - debug: shuttercontrol.0 (3329233) calculate astrodata ...
2025-10-09 14:50:00.003  - debug: shuttercontrol.0 (3329233) Sun Azimut: 206.2°
2025-10-09 14:50:00.003  - debug: shuttercontrol.0 (3329233) Sun Elevation: 29.7°
2025-10-09 14:50:02.005  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:02.005  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:50:12.007  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:12.008  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:50:22.009  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:22.010  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:50:32.012  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:32.012  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 14:50:39.782  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 15616
2025-10-09 14:50:42.014  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:42.015  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 14:50:49.783  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:50:49.783  - debug: shuttercontrol.0 (3329233) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 15616lux
2025-10-09 14:50:51.783  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:51.784  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:50:52.016  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:50:52.017  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 14:51:01.786  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:51:01.786  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:51:02.019  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:51:02.020  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 14:51:11.787  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:51:11.788  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:51:54.807  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 18769.92
2025-10-09 14:52:04.807  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:52:17.710  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 22548.48
2025-10-09 14:52:19.885  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 28241.92
2025-10-09 14:52:24.231  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 22261.76
2025-10-09 14:52:27.711  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:52:29.887  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:52:31.901  - debug: shuttercontrol.0 (3329233) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 17.55°C
2025-10-09 14:52:33.901  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:52:33.902  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:52:33.903  - debug: shuttercontrol.0 (3329233) Rolladen Hof 1: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:52:33.903  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 1 value: 100%
2025-10-09 14:52:33.904  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:52:33.904  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 1: down_Sunprotect
2025-10-09 14:52:33.904  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 1 is active
2025-10-09 14:52:33.904  - debug: shuttercontrol.0 (3329233) Temperatur outside: 17.55 > 15 AND Light: 22261.76 > 20000
2025-10-09 14:52:33.904  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 1 old height: 0% new height: 100%
2025-10-09 14:52:33.914  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:52:33.914  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 1 old value = 0% | new value = 100%
2025-10-09 14:52:34.232  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:52:43.905  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:52:43.906  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:52:43.907  - debug: shuttercontrol.0 (3329233) Rolladen Hof 2: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:52:43.907  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 2 value: 100%
2025-10-09 14:52:43.907  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:52:43.908  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:52:43.908  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 2: down_Sunprotect
2025-10-09 14:52:43.909  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 2 is active
2025-10-09 14:52:43.909  - debug: shuttercontrol.0 (3329233) Temperatur outside: 17.55 > 15 AND Light: 22261.76 > 20000
2025-10-09 14:52:43.909  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 2 old height: 0% new height: 100%
2025-10-09 14:52:43.918  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:52:43.918  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:52:43.918  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 2 old value = 0% | new value = 100%
2025-10-09 14:52:43.959  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 2 old value = 0% | new value = 100%
2025-10-09 14:52:53.909  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:52:53.910  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:52:53.911  - debug: shuttercontrol.0 (3329233) Rolladen Hof 3: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:52:53.911  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 3 value: 100%
2025-10-09 14:52:53.912  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:52:53.912  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 3: down_Sunprotect
2025-10-09 14:52:53.912  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 3 is active
2025-10-09 14:52:53.912  - debug: shuttercontrol.0 (3329233) Temperatur outside: 17.55 > 15 AND Light: 22261.76 > 20000
2025-10-09 14:52:53.912  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 3 old height: 0% new height: 100%
2025-10-09 14:52:53.921  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:52:53.922  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 3 old value = 0% | new value = 100%
2025-10-09 14:53:03.913  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:53:03.914  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 14:53:03.915  - debug: shuttercontrol.0 (3329233) Rolladen Hof 4: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:53:03.915  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 4 value: 100%
2025-10-09 14:53:03.915  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:53:03.916  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 4: down_Sunprotect
2025-10-09 14:53:03.916  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 4 is active
2025-10-09 14:53:03.916  - debug: shuttercontrol.0 (3329233) Temperatur outside: 17.55 > 15 AND Light: 22261.76 > 20000
2025-10-09 14:53:03.916  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 4 old height: 0% new height: 100%
2025-10-09 14:53:03.926  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:53:03.926  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 4 old value = 0% | new value = 100%
2025-10-09 14:53:13.917  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:53:13.918  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 14:53:13.919  - debug: shuttercontrol.0 (3329233) Rolladen Hof 5: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:53:13.919  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 5 value: 100%
2025-10-09 14:53:13.919  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:53:13.920  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:53:13.920  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 5: down_Sunprotect
2025-10-09 14:53:13.920  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 5 is active
2025-10-09 14:53:13.920  - debug: shuttercontrol.0 (3329233) Temperatur outside: 17.55 > 15 AND Light: 22261.76 > 20000
2025-10-09 14:53:13.920  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 5 old height: 0% new height: 100%
2025-10-09 14:53:13.930  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:53:13.930  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:53:13.930  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 0% | new value = 100%
2025-10-09 14:53:13.971  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 0% | new value = 100%
2025-10-09 14:53:23.921  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:53:23.922  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 14:53:33.923  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:53:33.924  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 14:53:33.925  - debug: shuttercontrol.0 (3329233) Rolladen Hof 7: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:53:33.925  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 7 value: 100%
2025-10-09 14:53:33.925  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:53:33.926  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 7: down_Sunprotect
2025-10-09 14:53:33.926  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 7 is active
2025-10-09 14:53:33.926  - debug: shuttercontrol.0 (3329233) Temperatur outside: 17.55 > 15 AND Light: 22261.76 > 20000
2025-10-09 14:53:33.926  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 7 old height: 0% new height: 100%
2025-10-09 14:53:33.936  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:53:33.936  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 0% | new value = 100%
2025-10-09 14:53:33.967  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:53:33.976  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:53:33.977  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 0% | new value = 100%
2025-10-09 14:54:02.192  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 26910.72
2025-10-09 14:54:10.900  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 32440.32
2025-10-09 14:54:12.194  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:54:12.194  - debug: shuttercontrol.0 (3329233) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 26910.72lux
2025-10-09 14:54:14.195  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:54:14.196  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:54:20.901  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:54:24.197  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:54:24.198  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:54:30.485  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 39444.48
2025-10-09 14:54:34.199  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:54:34.200  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:54:40.226  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 31232
2025-10-09 14:54:40.485  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:54:44.201  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:54:44.202  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 14:54:50.226  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:54:54.203  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:54:54.204  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 14:55:00.002  - debug: shuttercontrol.0 (3329233) calculate astrodata ...
2025-10-09 14:55:00.002  - debug: shuttercontrol.0 (3329233) Sun Azimut: 207.6°
2025-10-09 14:55:00.002  - debug: shuttercontrol.0 (3329233) Sun Elevation: 29.3°
2025-10-09 14:55:02.003  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:02.004  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:55:04.206  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:04.207  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 14:55:04.475  - debug: shuttercontrol.0 (3329233) Alarm Rain changed: false
2025-10-09 14:55:04.475  - debug: shuttercontrol.0 (3329233) start shutterAlarm
2025-10-09 14:55:04.475  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:04.476  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:55:04.476  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 1 value: 0%
2025-10-09 14:55:04.477  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:04.478  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:04.478  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 old height: 100% new height: 0%
2025-10-09 14:55:04.486  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:04.487  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 1 old value = 100% | new value = 0%
2025-10-09 14:55:04.487  - debug: shuttercontrol.0 (3329233) Rolladen Hof 1 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:04.488  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:04.488  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 1 old value = 100% | new value = 0%
2025-10-09 14:55:04.488  - debug: shuttercontrol.0 (3329233) Rolladen Hof 1 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:12.005  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:12.006  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:55:14.208  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:14.209  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 14:55:14.479  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:14.480  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:55:14.480  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 2 value: 0%
2025-10-09 14:55:14.481  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:14.481  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 old height: 100% new height: 0%
2025-10-09 14:55:14.482  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:14.490  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:14.491  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 2 old value = 100% | new value = 0%
2025-10-09 14:55:14.491  - debug: shuttercontrol.0 (3329233) Rolladen Hof 2 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:14.493  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:14.493  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 2 old value = 100% | new value = 0%
2025-10-09 14:55:14.493  - debug: shuttercontrol.0 (3329233) Rolladen Hof 2 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:22.007  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:22.008  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:55:24.482  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:24.483  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:55:24.483  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 3 value: 0%
2025-10-09 14:55:24.484  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:24.484  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 old height: 100% new height: 0%
2025-10-09 14:55:24.485  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:24.494  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:24.494  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:24.494  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 3 old value = 100% | new value = 0%
2025-10-09 14:55:24.495  - debug: shuttercontrol.0 (3329233) Rolladen Hof 3 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:24.502  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 3 old value = 100% | new value = 0%
2025-10-09 14:55:24.502  - debug: shuttercontrol.0 (3329233) Rolladen Hof 3 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:34.485  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:34.486  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 14:55:34.488  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 4 value: 0%
2025-10-09 14:55:34.488  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:34.490  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 old height: 100% new height: 0%
2025-10-09 14:55:34.498  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:34.501  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 4 old value = 100% | new value = 0%
2025-10-09 14:55:34.501  - debug: shuttercontrol.0 (3329233) Rolladen Hof 4 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:44.490  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:44.490  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 14:55:44.491  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 5 value: 0%
2025-10-09 14:55:44.492  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:44.492  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 old height: 100% new height: 0%
2025-10-09 14:55:44.502  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:44.502  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 100% | new value = 0%
2025-10-09 14:55:44.502  - debug: shuttercontrol.0 (3329233) Rolladen Hof 5 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:44.533  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:55:44.544  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:55:44.544  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 100% | new value = 0%
2025-10-09 14:55:44.544  - debug: shuttercontrol.0 (3329233) Rolladen Hof 5 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:55:48.835  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 38686.72
2025-10-09 14:55:54.493  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:55:54.494  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 14:55:58.835  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:56:04.071  - debug: shuttercontrol.0 (3329233) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 18.07°C
2025-10-09 14:56:04.495  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:04.495  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 14:56:04.496  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 7 value: 0%
2025-10-09 14:56:04.496  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:04.497  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 old height: 100% new height: 0%
2025-10-09 14:56:04.506  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:04.506  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 100% | new value = 0%
2025-10-09 14:56:04.506  - debug: shuttercontrol.0 (3329233) Rolladen Hof 7 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:56:04.538  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:04.548  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:04.548  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 100% | new value = 0%
2025-10-09 14:56:04.548  - debug: shuttercontrol.0 (3329233) Rolladen Hof 7 Old value = 100% | New value = 0% | automatic is active
2025-10-09 14:56:06.072  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:06.073  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:56:06.074  - debug: shuttercontrol.0 (3329233) Rolladen Hof 1: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:56:06.074  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 1 value: 100%
2025-10-09 14:56:06.074  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:06.075  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:06.075  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 1: down_Sunprotect
2025-10-09 14:56:06.075  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 1 is active
2025-10-09 14:56:06.075  - debug: shuttercontrol.0 (3329233) Temperatur outside: 18.07 > 15 AND Light: 38686.72 > 20000
2025-10-09 14:56:06.075  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 1 old height: 0% new height: 100%
2025-10-09 14:56:06.085  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:06.085  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:06.085  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 1 old value = 0% | new value = 100%
2025-10-09 14:56:06.125  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 1 old value = 0% | new value = 100%
2025-10-09 14:56:12.776  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 52264.96
2025-10-09 14:56:16.076  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:16.077  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:56:16.078  - debug: shuttercontrol.0 (3329233) Rolladen Hof 2: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:56:16.078  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 2 value: 100%
2025-10-09 14:56:16.078  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:16.079  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 2: down_Sunprotect
2025-10-09 14:56:16.079  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 2 is active
2025-10-09 14:56:16.079  - debug: shuttercontrol.0 (3329233) Temperatur outside: 18.07 > 15 AND Light: 52264.96 > 20000
2025-10-09 14:56:16.079  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 2 old height: 0% new height: 100%
2025-10-09 14:56:16.088  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:16.089  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 2 old value = 0% | new value = 100%
2025-10-09 14:56:22.776  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:56:26.080  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:26.080  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:56:26.081  - debug: shuttercontrol.0 (3329233) Rolladen Hof 3: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:56:26.081  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 3 value: 100%
2025-10-09 14:56:26.081  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:26.082  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 3: down_Sunprotect
2025-10-09 14:56:26.082  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 3 is active
2025-10-09 14:56:26.082  - debug: shuttercontrol.0 (3329233) Temperatur outside: 18.07 > 15 AND Light: 52264.96 > 20000
2025-10-09 14:56:26.082  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 3 old height: 0% new height: 100%
2025-10-09 14:56:26.092  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:26.092  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 3 old value = 0% | new value = 100%
2025-10-09 14:56:36.083  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:36.084  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 14:56:36.085  - debug: shuttercontrol.0 (3329233) Rolladen Hof 4: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:56:36.085  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 4 value: 100%
2025-10-09 14:56:36.085  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:36.086  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:36.087  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 4: down_Sunprotect
2025-10-09 14:56:36.087  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 4 is active
2025-10-09 14:56:36.087  - debug: shuttercontrol.0 (3329233) Temperatur outside: 18.07 > 15 AND Light: 52264.96 > 20000
2025-10-09 14:56:36.087  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 4 old height: 0% new height: 100%
2025-10-09 14:56:36.095  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:36.097  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:36.118  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 4 old value = 0% | new value = 100%
2025-10-09 14:56:36.159  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 4 old value = 0% | new value = 100%
2025-10-09 14:56:46.087  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:46.088  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 14:56:46.089  - debug: shuttercontrol.0 (3329233) Rolladen Hof 5: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:56:46.089  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 5 value: 100%
2025-10-09 14:56:46.089  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:56:46.090  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 5: down_Sunprotect
2025-10-09 14:56:46.090  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 5 is active
2025-10-09 14:56:46.090  - debug: shuttercontrol.0 (3329233) Temperatur outside: 18.07 > 15 AND Light: 52264.96 > 20000
2025-10-09 14:56:46.090  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 5 old height: 0% new height: 100%
2025-10-09 14:56:46.100  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:56:46.100  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 0% | new value = 100%
2025-10-09 14:56:48.738  - debug: shuttercontrol.0 (3329233) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 18.58°C
2025-10-09 14:56:50.738  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:50.738  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:56:54.021  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 39424
2025-10-09 14:56:56.091  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:56:56.092  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 14:57:00.739  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:00.740  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:57:04.022  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:57:04.022  - debug: shuttercontrol.0 (3329233) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 39424lux
2025-10-09 14:57:06.022  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:06.023  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:57:06.093  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:06.093  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 14:57:06.094  - debug: shuttercontrol.0 (3329233) Rolladen Hof 7: Check basis for sunprotect. Height:0 > HeightDownSun: 100 AND Height:0 == currentHeight:0 AND currentHeight:0 == heightUp:0
2025-10-09 14:57:06.094  - info: shuttercontrol.0 (3329233) Sunprotect #414 Set ID: Rolladen Hof 7 value: 100%
2025-10-09 14:57:06.095  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 14:57:06.096  - debug: shuttercontrol.0 (3329233) last automatic Action for Rolladen Hof 7: down_Sunprotect
2025-10-09 14:57:06.096  - debug: shuttercontrol.0 (3329233) Sunprotect for Rolladen Hof 7 is active
2025-10-09 14:57:06.096  - debug: shuttercontrol.0 (3329233) Temperatur outside: 18.58 > 15 AND Light: 39424 > 20000
2025-10-09 14:57:06.096  - debug: shuttercontrol.0 (3329233) Sunprotect Rolladen Hof 7 old height: 0% new height: 100%
2025-10-09 14:57:06.104  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 14:57:06.105  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 0% | new value = 100%
2025-10-09 14:57:10.741  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:10.742  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 14:57:12.571  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 30433.28
2025-10-09 14:57:16.025  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:16.025  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:57:20.743  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:20.743  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 14:57:22.571  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:57:30.744  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:30.744  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 14:57:40.746  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:40.746  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 14:57:50.748  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:57:50.749  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 14:58:48.278  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 24330.24
2025-10-09 14:58:58.279  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:37.191  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 30289.92
2025-10-09 14:59:38.331  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 36433.92
2025-10-09 14:59:39.365  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 47759.36
2025-10-09 14:59:40.506  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 58204.16
2025-10-09 14:59:44.852  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 40325.12
2025-10-09 14:59:47.027  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 32051.2
2025-10-09 14:59:47.191  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:47.191  - debug: shuttercontrol.0 (3329233) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 30289.92lux
2025-10-09 14:59:48.331  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:49.192  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:59:49.193  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 14:59:49.205  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 25477.12
2025-10-09 14:59:49.365  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:50.507  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:54.852  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:57.027  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 14:59:59.194  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 14:59:59.195  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 14:59:59.205  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 15:00:00.002  - debug: shuttercontrol.0 (3329233) calculate astrodata ...
2025-10-09 15:00:00.002  - debug: shuttercontrol.0 (3329233) Sun Azimut: 208.9°
2025-10-09 15:00:00.002  - debug: shuttercontrol.0 (3329233) Sun Elevation: 29°
2025-10-09 15:00:02.005  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:02.006  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 15:00:09.196  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:09.197  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 15:00:12.007  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:12.008  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 15:00:19.199  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:19.199  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 15:00:22.009  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:22.010  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 15:00:29.200  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:29.201  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 15:00:32.010  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:32.011  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 15:00:39.202  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:39.203  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 15:00:42.012  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:42.013  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 15:00:49.203  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:49.204  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 15:00:52.014  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:00:52.015  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 15:01:03.297  - debug: shuttercontrol.0 (3329233) outsidetemperature changed: alias.0.weather.Innenhof.temperature | Value: 19.1°C
2025-10-09 15:01:05.297  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:01:05.298  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 15:01:15.299  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:01:15.300  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 15:01:25.301  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:01:25.302  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 15:01:35.303  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:01:35.304  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 15:01:45.306  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:01:45.307  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 15:01:55.307  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:01:55.308  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 15:02:05.309  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:02:05.310  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 15:03:55.077  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 32747.52
2025-10-09 15:04:01.609  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 23900.16
2025-10-09 15:04:05.078  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 15:04:05.078  - debug: shuttercontrol.0 (3329233) Lightsensor changed: alias.0.weather.Innenhof.luminance | Value: 32747.52lux
2025-10-09 15:04:07.078  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:04:07.079  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 15:04:11.610  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 15:04:17.080  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:04:17.080  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 15:04:27.081  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:04:27.082  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 15:04:37.082  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:04:37.083  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 15:04:47.084  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:04:47.084  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 15:04:57.086  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:04:57.088  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 15:05:00.001  - debug: shuttercontrol.0 (3329233) calculate astrodata ...
2025-10-09 15:05:00.001  - debug: shuttercontrol.0 (3329233) Sun Azimut: 210.3°
2025-10-09 15:05:00.001  - debug: shuttercontrol.0 (3329233) Sun Elevation: 28.6°
2025-10-09 15:05:02.002  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:02.002  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 15:05:04.524  - debug: shuttercontrol.0 (3329233) Alarm Rain changed: false
2025-10-09 15:05:04.524  - debug: shuttercontrol.0 (3329233) start shutterAlarm
2025-10-09 15:05:04.524  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:04.525  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_1.position: false
2025-10-09 15:05:04.525  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 1 value: 0%
2025-10-09 15:05:04.525  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:04.526  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 1 old height: 100% new height: 0%
2025-10-09 15:05:04.536  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:04.536  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 1 old value = 100% | new value = 0%
2025-10-09 15:05:04.536  - debug: shuttercontrol.0 (3329233) Rolladen Hof 1 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:07.089  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:07.090  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 15:05:12.005  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:12.006  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 15:05:14.526  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:14.527  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_2.position: false
2025-10-09 15:05:14.527  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 2 value: 0%
2025-10-09 15:05:14.527  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:14.528  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 2 old height: 100% new height: 0%
2025-10-09 15:05:14.537  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:14.538  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 2 old value = 100% | new value = 0%
2025-10-09 15:05:14.538  - debug: shuttercontrol.0 (3329233) Rolladen Hof 2 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:24.529  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:24.530  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_3.position: false
2025-10-09 15:05:24.530  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 3 value: 0%
2025-10-09 15:05:24.531  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:24.531  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 3 old height: 100% new height: 0%
2025-10-09 15:05:24.541  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:24.541  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 3 old value = 100% | new value = 0%
2025-10-09 15:05:24.541  - debug: shuttercontrol.0 (3329233) Rolladen Hof 3 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:34.531  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:34.532  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 15:05:34.532  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 4 value: 0%
2025-10-09 15:05:34.533  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:34.534  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 4 old height: 100% new height: 0%
2025-10-09 15:05:34.534  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:34.543  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:34.543  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 4 old value = 100% | new value = 0%
2025-10-09 15:05:34.543  - debug: shuttercontrol.0 (3329233) Rolladen Hof 4 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:34.544  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:34.544  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 4 old value = 100% | new value = 0%
2025-10-09 15:05:34.544  - debug: shuttercontrol.0 (3329233) Rolladen Hof 4 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:37.276  - debug: shuttercontrol.0 (3329233) Brightness sensor value: 19107.84
2025-10-09 15:05:44.534  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:44.535  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_5.position: false
2025-10-09 15:05:44.536  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 5 value: 0%
2025-10-09 15:05:44.536  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:44.537  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:05:44.537  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 5 old height: 100% new height: 0%
2025-10-09 15:05:44.546  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:44.546  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 100% | new value = 0%
2025-10-09 15:05:44.546  - debug: shuttercontrol.0 (3329233) Rolladen Hof 5 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:44.547  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:05:44.547  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 5 old value = 100% | new value = 0%
2025-10-09 15:05:44.547  - debug: shuttercontrol.0 (3329233) Rolladen Hof 5 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:05:47.276  - debug: shuttercontrol.0 (3329233) Brightness State Down is: false
2025-10-09 15:05:54.538  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:05:54.539  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_6.position: false
2025-10-09 15:06:04.540  - debug: shuttercontrol.0 (3329233) Start pendingAlarm to check whether an alarm is currently pending (except in the event of frost)
2025-10-09 15:06:04.541  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_7.position: false
2025-10-09 15:06:04.541  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 7 value: 0%
2025-10-09 15:06:04.542  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:06:04.542  - debug: shuttercontrol.0 (3329233) shutter alarm rain endet and no other alarm is pending Rolladen Hof 7 old height: 100% new height: 0%
2025-10-09 15:06:04.552  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:06:04.552  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 100% | new value = 0%
2025-10-09 15:06:04.552  - debug: shuttercontrol.0 (3329233) Rolladen Hof 7 Old value = 100% | New value = 0% | automatic is active
2025-10-09 15:06:04.583  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check started
2025-10-09 15:06:04.592  - debug: shuttercontrol.0 (3329233) #0 wait for shutter check end
2025-10-09 15:06:04.593  - debug: shuttercontrol.0 (3329233) Shutter state changed: Rolladen Hof 7 old value = 100% | new value = 0%
2025-10-09 15:06:04.593  - debug: shuttercontrol.0 (3329233) Rolladen Hof 7 Old value = 100% | New value = 0% | automatic is active

Im Grunde war heute, bis auf diese komischen Reaktionen auf das false im Regenalarm, so, wie ich mir das vorgestellt habe. Danke schonmal für die ganze Unterstützung. :-)

[simatec]

@garfonso Die Höhe nach Regen Ende kommt hier her:

Da deine Jalousien etwas anders laufen und nicht 0 = geschlossen ist, musst du statt der 100% dort 0% eintragen.
Da deine Rollläden entgegengesetzt fahren, musst du hier umdenken.

[Garfonso]

@simatec
ok, dann verstehe ich den Alarm anscheinend nicht.
Ich möchte eigentlich, dass die bei Regen auf sind und nach Regen weiter Sonnenschutz machen (also zu, falls die Bedingungen sagen, wäre gut).

Dafür ist der Regenalarm dann nicht verwendbar...?

//Edit: und tatsächlich habe ich da 0 eingetragen... vielleicht haben wir aneinander vorbei geredet?
Bei Regen auf 0 geht ja:

2025-10-09 14:15:34.251  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: true
2025-10-09 14:15:34.252  - debug: shuttercontrol.0 (3329233) shutter alarm rain Rolladen Hof 4 already at: 0% - setting current action: rain

Das Problem ist ja nach Regen. Bei Regen fahren sie, so wie ich mir das vorgestellt habe auf 0. Aber wenn der Regenalarm "false" ausspuckt, passiert irgendwas... (und wenn vorher schon "false" war, dann halt extrem komisch...)

z.B. hier:

2025-10-09 15:35:34.702  - debug: shuttercontrol.0 (3329233) status alarm pending for alias.0.blinds.Hof_4.position: false
2025-10-09 15:35:34.703  - info: shuttercontrol.0 (3329233) Alarm rain end Set ID: Rolladen Hof 4 value: 40%

[Homoran]

@garfonso der Regenalarm soll die Rollläden heru terfahren um die Fenster zu schützen, oder um Regen nicht in offene Fenster dringen zu lassen.

Die dort eingestellte Höhe ist also für den Adapter eine mehr oder weniger geschlossene Position.

Deswegen fährt er bei Ende Regen auf die von dir definierte "offen"-Höhe

[Bongo]

Hi.
Ich habe meine Rollladen-Steuerung selbst Programmiert. Hab mir aber gedacht, warum nicht den Adapter versuchen. Deshalb wollte ich es mal mit einem Rollladen testen.
Die Konfiguration ist mir noch nicht ganz klar. Damit ich nicht die ganze Familie in Aufruhr bringe, bitte ich hier meine Konfiguration zu prüfen.

Ziel:
Öffnen bis 60% immer im 8:15 Uhr.
Schließen bei Sonnenuntergang.

Wäre das so korrekt?

[Homoran]

@bongo sagte in Test Adapter shuttercontrol v2.0.x:

Deshalb wollte ich es mal mit einem Rollladen testen.

sehr gut!
Mache ich bei Änderungen/ Tests anderer Einstellungen auch immer nur mit meinem Arbeitszimmerrollladen

@bongo sagte in Test Adapter shuttercontrol v2.0.x:

Wäre das so korrekt?

ich denke ja

[rtwl]

@bongo Am Wochenende um 6:00 Uhr wird geöffnet. Willst du das wirklich so? 😉

[Homoran]

@rtwl sagte in Test Adapter shuttercontrol v2.0.x:

@bongo Am Wochenende um 6:00 Uhr wird geöffnet. Willst du das wirklich so? 😉

oops, betriebsblind ich war!
nur Anforderungen gecheckt

[Bongo]

@rtwl sagte in Test Adapter shuttercontrol v2.0.x:

@bongo Am Wochenende um 6:00 Uhr wird geöffnet. Willst du das wirklich so? 😉

Danke für den Hinweis. Das möchte ich natürlich nicht. Habe es aber zu spät gelesen. Schon gab es heute um 6 Uhr ärger :-)

[simatec]

@bongo Jetzt weißt du aber, dass es funktioniert 🤣