NEWS
zigbee2mqtt läuft sein heute morgen nicht mehr
-
Hallo alle zusammen, ich habe das Problem das mein Zigbee2mqtt seit heute morgen nicht mehr ansprechbar ist.
Es wird mit einem Cod.m Zigbee Koordinator angesprochen und dieser zeigt nur noch die Verbindung zum Netzwerk und zu mqtt grün zu Zigbee rot die Zigbee2mqtt Instanz zeigt verbindung zu geräte als x an.
Ein Neustart brachte keine Lösung vorrausgegangen war die Rücksetztung des Shelly Adapter auf die Version 10.1 und dem Reboot. wärendem habe ich wohl versucht eine Zigbee Lampe zu steuern.
Kann mir jemand schreiben wie ich dieses wieder im Iobroker zum laufen bewegen kann.
Hier mal meine SystemCTL und Journal CTL
pi@raspberrypi5:/opt/zigbee2mqtt $ systemctl UNIT LOAD ACTIVE SUB DESCRIPTION > proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point > sys-devices-platform-axi-1000120000.pcie-1f00100000.ethernet-net-eth0-ptp0.device loaded active plugged /sys/devices/platform/axi/1000120000.pcie/1f00100000.ethernet/net/eth0/ptp0 sys-devices-platform-axi-1000120000.pcie-1f00100000.ethernet-net-eth0.device loaded active plugged /sys/devices/platform/axi/1000120000.pcie/1f00100000.ethernet/net/eth0 sys-devices-platform-axi-1000120000.pcie-1f00300000.usb-xhci\x2dhcd.1-usb3-3\x2d2-3\x2d2:1.0-ttyUSB0-tty-ttyUSB0.device loaded active plugged Bridge(I2C/SPI/UART/FIFO) sys-devices-platform-axi-1001100000.mmc-mmc_host-mmc1-mmc1:0001-mmc1:0001:1-net-wlan0.device loaded active plugged /sys/devices/platform/axi/1001100000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1/net/wlan0 sys-devices-platform-axi-1002000000.v3d-drm-card0.device loaded active plugged /sys/devices/platform/axi/1002000000.v3d/drm/card0 sys-devices-platform-axi-1002000000.v3d-drm-renderD128.device loaded active plugged /sys/devices/platform/axi/1002000000.v3d/drm/renderD128 sys-devices-platform-axi-axi:gpu-drm-card1-card1\x2dHDMI\x2dA\x2d1.device loaded active plugged /sys/devices/platform/axi/axi:gpu/drm/card1/card1-HDMI-A-1 sys-devices-platform-axi-axi:gpu-drm-card1-card1\x2dHDMI\x2dA\x2d2.device loaded active plugged /sys/devices/platform/axi/axi:gpu/drm/card1/card1-HDMI-A-2 sys-devices-platform-axi-axi:gpu-drm-card1-card1\x2dWriteback\x2d1.device loaded active plugged /sys/devices/platform/axi/axi:gpu/drm/card1/card1-Writeback-1 sys-devices-platform-axi-axi:gpu-drm-card1-card1\x2dWriteback\x2d2.device loaded active plugged /sys/devices/platform/axi/axi:gpu/drm/card1/card1-Writeback-2 sys-devices-platform-axi-axi:gpu-drm-card1.device loaded active plugged /sys/devices/platform/axi/axi:gpu/drm/card1 sys-devices-platform-soc\x40107c000000-1000fff000.mmc-mmc_host-mmc0-mmc0:aaaa-block-mmcblk0-mmcblk0p1.device loaded active plugged /sys/devices/platform/soc@107c000000/1000fff000.mmc/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk> sys-devices-platform-soc\x40107c000000-1000fff000.mmc-mmc_host-mmc0-mmc0:aaaa-block-mmcblk0-mmcblk0p2.device loaded active plugged /sys/devices/platform/soc@107c000000/1000fff000.mmc/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk> sys-devices-platform-soc\x40107c000000-1000fff000.mmc-mmc_host-mmc0-mmc0:aaaa-block-mmcblk0.device loaded active plugged /sys/devices/platform/soc@107c000000/1000fff000.mmc/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0 sys-devices-platform-soc\x40107c000000-107c701400.hdmi-sound-card0-controlC0.device loaded active plugged /sys/devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/controlC0 sys-devices-platform-soc\x40107c000000-107c706400.hdmi-sound-card1-controlC1.device loaded active plugged /sys/devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/controlC1 sys-devices-platform-soc\x40107c000000-107d001000.serial-107d001000.serial:0-107d001000.serial:0.0-tty-ttyAMA10.device loaded active plugged /sys/devices/platform/soc@107c000000/107d001000.serial/107d001000.serial:0/107d001000.serial:0.0> sys-devices-platform-soc\x40107c000000-107d50c000.serial-107d50c000.serial:0-107d50c000.serial:0.0-serial0-serial0\x2d0-bluetooth-hci0.device loaded active plugged /sys/devices/platform/soc@107c000000/107d50c000.serial/107d50c000.serial:0/107d50c000.serial:0.0> sys-devices-virtual-block-ram0.device loaded active plugged /sys/devices/virtual/block/ram0 sys-devices-virtual-block-ram1.device loaded active plugged /sys/devices/virtual/block/ram1 sys-devices-virtual-block-ram10.device loaded active plugged /sys/devices/virtual/block/ram10 sys-devices-virtual-block-ram11.device loaded active plugged /sys/devices/virtual/block/ram11 sys-devices-virtual-block-ram12.device loaded active plugged /sys/devices/virtual/block/ram12 sys-devices-virtual-block-ram13.device loaded active plugged /sys/devices/virtual/block/ram13 sys-devices-virtual-block-ram14.device loaded active plugged /sys/devices/virtual/block/ram14 sys-devices-virtual-block-ram15.device loaded active plugged /sys/devices/virtual/block/ram15 sys-devices-virtual-block-ram2.device loaded active plugged /sys/devices/virtual/block/ram2 sys-devices-virtual-block-ram3.device loaded active plugged /sys/devices/virtual/block/ram3 sys-devices-virtual-block-ram4.device loaded active plugged /sys/devices/virtual/block/ram4 sys-devices-virtual-block-ram5.device loaded active plugged /sys/devices/virtual/block/ram5 sys-devices-virtual-block-ram6.device loaded active plugged /sys/devices/virtual/block/ram6 sys-devices-virtual-block-ram7.device loaded active plugged /sys/devices/virtual/block/ram7 sys-devices-virtual-block-ram8.device loaded active plugged /sys/devices/virtual/block/ram8 sys-devices-virtual-block-ram9.device loaded active plugged /sys/devices/virtual/block/ram9 sys-devices-virtual-misc-rfkill.device loaded active plugged /sys/devices/virtual/misc/rfkill sys-devices-virtual-tty-ttyprintk.device loaded active plugged /sys/devices/virtual/tty/ttyprintk sys-module-configfs.device loaded active plugged /sys/module/configfs sys-module-fuse.device loaded active plugged /sys/module/fuse sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0 sys-subsystem-net-devices-eth0.device loaded active plugged /sys/subsystem/net/devices/eth0 sys-subsystem-net-devices-wlan0.device loaded active plugged /sys/subsystem/net/devices/wlan0 > -.mount loaded active mounted Root Mount boot-firmware.mount loaded active mounted /boot/firmware dev-mqueue.mount loaded active mounted POSIX Message Queue File System proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System run-credentials-systemd\x2dsysctl.service.mount loaded active mounted /run/credentials/systemd-sysctl.service run-credentials-systemd\x2dsysusers.service.mount loaded active mounted /run/credentials/systemd-sysusers.service run-credentials-systemd\x2dtmpfiles\x2dsetup.service.mount loaded active mounted /run/credentials/systemd-tmpfiles-setup.service run-credentials-systemd\x2dtmpfiles\x2dsetup\x2ddev.service.mount loaded active mounted /run/credentials/systemd-tmpfiles-setup-dev.service run-rpc_pipefs.mount loaded active mounted RPC Pipe File System run-user-1000-doc.mount loaded active mounted /run/user/1000/doc run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs run-user-1000.mount loaded active mounted /run/user/1000 sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System sys-kernel-config.mount loaded active mounted Kernel Configuration File System sys-kernel-debug.mount loaded active mounted Kernel Debug File System sys-kernel-tracing.mount loaded active mounted Kernel Trace File System > cups.path loaded active running CUPS Scheduler systemd-ask-password-plymouth.path loaded active waiting Forward Password Requests to Plymouth Directory Watch systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch > init.scope loaded active running System and Service Manager session-1.scope loaded active running Session 1 of User pi session-3.scope loaded active running Session 3 of User pi session-7.scope loaded active running Session 7 of User pi > accounts-daemon.service loaded active running Accounts Service alsa-restore.service loaded active exited Save/Restore Sound Card State avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack bluetooth.service loaded active running Bluetooth service colord.service loaded active running Manage, Install and Generate Color Profiles console-setup.service loaded active exited Set console font and keymap cron.service loaded active running Regular background program processing daemon cups-browsed.service loaded active running Make remote CUPS printers available locally cups.service loaded active running CUPS Scheduler dbus.service loaded active running D-Bus System Message Bus dphys-swapfile.service loaded active exited dphys-swapfile - set up, mount/unmount, and delete a swap file fake-hwclock.service loaded active exited Restore / save the current clock getty@tty1.service loaded active running Getty on tty1 glamor-test.service loaded active exited Check for glamor pi@raspberrypi5:/opt/zigbee2mqtt $ journalctl Okt 22 15:17:17 raspberrypi kernel: Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] Okt 22 15:17:17 raspberrypi kernel: Linux version 6.6.51+rpt-rpi-2712 (serge@raspberrypi.com) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08) Okt 22 15:17:17 raspberrypi kernel: KASLR enabled Okt 22 15:17:17 raspberrypi kernel: random: crng init done Okt 22 15:17:17 raspberrypi kernel: Machine model: Raspberry Pi 5 Model B Rev 1.0 Okt 22 15:17:17 raspberrypi kernel: efi: UEFI not found. Okt 22 15:17:17 raspberrypi kernel: Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB Okt 22 15:17:17 raspberrypi kernel: OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Okt 22 15:17:17 raspberrypi kernel: OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma Okt 22 15:17:17 raspberrypi kernel: OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 Okt 22 15:17:17 raspberrypi kernel: OF: reserved mem: 0x000000003fd165c0..0x000000003fd165f7 (0 KiB) nomap non-reusable nvram@0 Okt 22 15:17:17 raspberrypi kernel: Zone ranges: Okt 22 15:17:17 raspberrypi kernel: DMA [mem 0x0000000000000000-0x00000000ffffffff] Okt 22 15:17:17 raspberrypi kernel: DMA32 empty Okt 22 15:17:17 raspberrypi kernel: Normal [mem 0x0000000100000000-0x00000001ffffffff] Okt 22 15:17:17 raspberrypi kernel: Movable zone start for each node Okt 22 15:17:17 raspberrypi kernel: Early memory node ranges Okt 22 15:17:17 raspberrypi kernel: node 0: [mem 0x0000000000000000-0x000000000007ffff] Okt 22 15:17:17 raspberrypi kernel: node 0: [mem 0x0000000000080000-0x000000003fbfffff] Okt 22 15:17:17 raspberrypi kernel: node 0: [mem 0x0000000040000000-0x00000001ffffffff] Okt 22 15:17:17 raspberrypi kernel: Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] Okt 22 15:17:17 raspberrypi kernel: On node 0, zone DMA: 256 pages in unavailable ranges Okt 22 15:17:17 raspberrypi kernel: psci: probing for conduit method from DT. Okt 22 15:17:17 raspberrypi kernel: psci: PSCIv1.1 detected in firmware. Okt 22 15:17:17 raspberrypi kernel: psci: Using standard PSCI v0.2 function IDs Okt 22 15:17:17 raspberrypi kernel: psci: MIGRATE_INFO_TYPE not supported. Okt 22 15:17:17 raspberrypi kernel: psci: SMC Calling Convention v1.2 Okt 22 15:17:17 raspberrypi kernel: percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376 Okt 22 15:17:17 raspberrypi kernel: pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384 Okt 22 15:17:17 raspberrypi kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Okt 22 15:17:17 raspberrypi kernel: Detected PIPT I-cache on CPU0 Okt 22 15:17:17 raspberrypi kernel: CPU features: detected: Virtualization Host Extensions Okt 22 15:17:17 raspberrypi kernel: CPU features: detected: Hardware dirty bit management Okt 22 15:17:17 raspberrypi kernel: CPU features: detected: Spectre-v4 Okt 22 15:17:17 raspberrypi kernel: CPU features: detected: Spectre-BHB Okt 22 15:17:17 raspberrypi kernel: CPU features: kernel page table isolation forced ON by KASLR Okt 22 15:17:17 raspberrypi kernel: CPU features: detected: Kernel page table isolation (KPTI) Okt 22 15:17:17 raspberrypi kernel: CPU features: detected: SSBS not fully self-synchronizing Okt 22 15:17:17 raspberrypi kernel: alternatives: applying boot alternatives Okt 22 15:17:17 raspberrypi kernel: Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:32:68:16 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=a84847a9-02 > Okt 22 15:17:17 raspberrypi kernel: Unknown kernel command line parameters "splash", will be passed to user space. Okt 22 15:17:17 raspberrypi kernel: Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) Okt 22 15:17:17 raspberrypi kernel: Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) Okt 22 15:17:17 raspberrypi kernel: Built 1 zonelists, mobility grouping on. Total pages: 521984 Okt 22 15:17:17 raspberrypi kernel: mem auto-init: stack:all(zero), heap alloc:off, heap free:off Okt 22 15:17:17 raspberrypi kernel: software IO TLB: area num 4. Okt 22 15:17:17 raspberrypi kernel: software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) Okt 22 15:17:17 raspberrypi kernel: Memory: 7895440K/8384512K available (13440K kernel code, 2224K rwdata, 4304K rodata, 5056K init, 1213K bss, 161392K reserved, 327680K cma-reserved) Okt 22 15:17:17 raspberrypi kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Okt 22 15:17:17 raspberrypi kernel: ftrace: allocating 43243 entries in 43 pages Okt 22 15:17:17 raspberrypi kernel: ftrace: allocated 43 pages with 4 groups Okt 22 15:17:17 raspberrypi kernel: trace event string verifier disabled Okt 22 15:17:17 raspberrypi kernel: rcu: Preemptible hierarchical RCU implementation. Okt 22 15:17:17 raspberrypi kernel: rcu: RCU event tracing is enabled. Okt 22 15:17:17 raspberrypi kernel: rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. Okt 22 15:17:17 raspberrypi kernel: Trampoline variant of Tasks RCU enabled. Okt 22 15:17:17 raspberrypi kernel: Rude variant of Tasks RCU enabled. Okt 22 15:17:17 raspberrypi kernel: Tracing variant of Tasks RCU enabled. Okt 22 15:17:17 raspberrypi kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Okt 22 15:17:17 raspberrypi kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 Okt 22 15:17:17 raspberrypi kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 Okt 22 15:17:17 raspberrypi kernel: Root IRQ handler: gic_handle_irq Okt 22 15:17:17 raspberrypi kernel: GIC: Using split EOI/Deactivate mode Okt 22 15:17:17 raspberrypi kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention. Okt 22 15:17:17 raspberrypi kernel: arch_timer: cp15 timer(s) running at 54.00MHz (phys). Okt 22 15:17:17 raspberrypi kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns Okt 22 15:17:17 raspberrypi kernel: sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Okt 22 15:17:17 raspberrypi kernel: Console: colour dummy device 80x25 Okt 22 15:17:17 raspberrypi kernel: printk: console [tty1] enabled Okt 22 15:17:17 raspberrypi kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) Okt 22 15:17:17 raspberrypi kernel: pid_max: default: 32768 minimum: 301 Okt 22 15:17:17 raspberrypi kernel: LSM: initializing lsm=capability,integrity Okt 22 15:17:17 raspberrypi kernel: Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) Okt 22 15:17:17 raspberrypi kernel: Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) Okt 22 15:17:17 raspberrypi kernel: cgroup: Disabling memory control group subsystem Okt 22 15:17:17 raspberrypi kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. Okt 22 15:17:17 raspberrypi kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. Okt 22 15:17:17 raspberrypi kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. Okt 22 15:17:17 raspberrypi kernel: rcu: Hierarchical SRCU implementation. Okt 22 15:17:17 raspberrypi kernel: rcu: Max phase no-delay instances is 1000. lines 1-80 ^C pi@raspberrypi5:/opt/zigbee2mqtt $Gruß
Mico@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
mein Zigbee2mqtt
das wäre nich ioBroker!
-
@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
mein Zigbee2mqtt
das wäre nich ioBroker!
cd /opt/zigbee2mqtt npm start > zigbee2mqtt@2.6.1 start > node index.js Starting Zigbee2MQTT without watchdog. Error: EACCES: permission denied, unlink '/opt/zigbee2mqtt/data/log/2025-09-22.0 7-05-31/log.log' at unlinkSync (node:fs:1952:11) at _unlinkSync (node:internal/fs/rimraf:215:14) at rimrafSync (node:internal/fs/rimraf:196:7) at node:internal/fs/rimraf:254:9 at Array.forEach (<anonymous>) at _rmdirSync (node:internal/fs/rimraf:251:7) at rimrafSync (node:internal/fs/rimraf:194:7) at rmSync (node:fs:1247:10) at rimrafNativeSync (/opt/zigbee2mqtt/node_modules/.pnpm/rimraf@6.0.1/node_m odules/rimraf/src/rimraf-native.ts:21:9) at /opt/zigbee2mqtt/node_modules/.pnpm/rimraf@6.0.1/node_modules/rimraf/src/ index.ts:78:21 npm notice npm notice New major version of npm available! 10.9.3 -> 11.6.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.6.0 npm notice To update run: npm install -g npm@11.6.0 npm notice pi@raspberrypi5:/opt/zigbee2mqtt $Das ist vom Coordinator da gibts keine Verbindung mehr
-
cd /opt/zigbee2mqtt npm start > zigbee2mqtt@2.6.1 start > node index.js Starting Zigbee2MQTT without watchdog. Error: EACCES: permission denied, unlink '/opt/zigbee2mqtt/data/log/2025-09-22.0 7-05-31/log.log' at unlinkSync (node:fs:1952:11) at _unlinkSync (node:internal/fs/rimraf:215:14) at rimrafSync (node:internal/fs/rimraf:196:7) at node:internal/fs/rimraf:254:9 at Array.forEach (<anonymous>) at _rmdirSync (node:internal/fs/rimraf:251:7) at rimrafSync (node:internal/fs/rimraf:194:7) at rmSync (node:fs:1247:10) at rimrafNativeSync (/opt/zigbee2mqtt/node_modules/.pnpm/rimraf@6.0.1/node_m odules/rimraf/src/rimraf-native.ts:21:9) at /opt/zigbee2mqtt/node_modules/.pnpm/rimraf@6.0.1/node_modules/rimraf/src/ index.ts:78:21 npm notice npm notice New major version of npm available! 10.9.3 -> 11.6.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.6.0 npm notice To update run: npm install -g npm@11.6.0 npm notice pi@raspberrypi5:/opt/zigbee2mqtt $Das ist vom Coordinator da gibts keine Verbindung mehr
und das ist beim Iobroker
ee2mqtt.1 2025-09-22 13:38:57.543 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:56.542 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:55.541 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:54.540 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:53.539 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:52.537 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:51.535 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:50.534 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:49.532 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:48.530 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:47.529 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:46.527 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:45.526 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:44.526 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:43.524 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:42.523 warn Start try again in 1 seconds... -
und das ist beim Iobroker
ee2mqtt.1 2025-09-22 13:38:57.543 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:56.542 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:55.541 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:54.540 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:53.539 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:52.537 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:51.535 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:50.534 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:49.532 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:48.530 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:47.529 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:46.527 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:45.526 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:44.526 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:43.524 warn Start try again in 1 seconds... zigbee2mqtt.1 2025-09-22 13:38:42.523 warn Start try again in 1 seconds...@mico Logisch. Solange zigbee2mqtt.io nicht läuft wird der Adapter keine Verbindung aufbauen können.
Laut dieser Meldung:
Error: EACCES: permission denied, unlink '/opt/zigbee2mqtt/data/log/2025-09-22.0 7-05-31/log.log'hast du ein Rechte-Problem.
Ich würde als erstens das System / den Container auf/in dem z2m läuft komplett neu starten. Dann versuchen z2m zu starten um zu sehen mit welchen Meldungen das schief geht. (wenn er nicht läuft)
Ab da müsstest Du dann bei Zigbee2mqtt nachfragen - da sitzen die Experten für diese Probleme.
A
-
@mico Logisch. Solange zigbee2mqtt.io nicht läuft wird der Adapter keine Verbindung aufbauen können.
Laut dieser Meldung:
Error: EACCES: permission denied, unlink '/opt/zigbee2mqtt/data/log/2025-09-22.0 7-05-31/log.log'hast du ein Rechte-Problem.
Ich würde als erstens das System / den Container auf/in dem z2m läuft komplett neu starten. Dann versuchen z2m zu starten um zu sehen mit welchen Meldungen das schief geht. (wenn er nicht läuft)
Ab da müsstest Du dann bei Zigbee2mqtt nachfragen - da sitzen die Experten für diese Probleme.
A
-
@asgothian
Wie mache ich das genau ? Ich habe von Linux keinerlei Ahnung und hatte mir das einrichten lassen, und es lief ja auch deswegen könnte ich mir vorstellen das die Rechte ja noch da sind.
hat das was mit diesem pnpm zu tun.@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
könnte ich mir vorstellen das die Rechte ja noch da sind.
Schau nach, was da genau los ist. Wie sehen die Rechte denn momentan aus? Auch am Dateisystem. Wenn es da Probleme gibt wird das z.B. 'nur lesend' eingehängt.
Sowas steht u.a. in der Ausgabe voniob diagdrin.
-
@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
könnte ich mir vorstellen das die Rechte ja noch da sind.
Schau nach, was da genau los ist. Wie sehen die Rechte denn momentan aus? Auch am Dateisystem. Wenn es da Probleme gibt wird das z.B. 'nur lesend' eingehängt.
Sowas steht u.a. in der Ausgabe voniob diagdrin.
Hiermal die iob diag
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi5 Icon name: computer Kernel: Linux 6.12.34+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 11:24:49 up 1 day, 3:42, 4 users, load average: 0.25, 0.20, 0.26 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** TIME AND TIMEZONES *** Local time: Tue 2025-09-23 11:24:49 CEST Universal time: Tue 2025-09-23 09:24:49 UTC RTC time: Tue 2025-09-23 09:24:49 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.1G 1.9G 28M 2.6G 4.4G Swap: 209M 0B 209M Total: 8.7G 4.1G 2.1G Active iob-Instances: 34 8063 M total memory 3902 M used memory 4344 M active memory 1354 M inactive memory 1832 M free memory 193 M buffer memory 2249 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 11:24:50 up 1 day, 3:42, 4 users, load average: 0.25, 0.20, 0.26 Tasks: 264 total, 1 running, 263 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 66.7 id, 33.3 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.2 total, 1832.7 free, 3902.8 used, 2443.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 4160.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 6.0M 1.6G 1% /run /dev/mmcblk0p2 ext4 58G 52G 3.5G 94% / tmpfs tmpfs 4.0G 400K 4.0G 1% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 807M 176K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Sep 22 07:42:33 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:32:68:16 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=a84847a9-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Sep 22 07:42:34 2025] EXT4-fs (mmcblk0p2): mounted filesystem 5170097f-f1f6-42d8-a2ff-8938cbdfa7be ro with ordered data mode. Quota mode: none. [Mon Sep 22 07:42:35 2025] EXT4-fs (mmcblk0p2): re-mounted 5170097f-f1f6-42d8-a2ff-8938cbdfa7be r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 41G /var/ 38G /var/lib/influxdb/engine/data 38G /var/lib/influxdb/engine 38G /var/lib/influxdb 38G /var/lib Archived and active journals take up 2.3G in the file system. /opt/iobroker/backups: 90M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 855M /opt/iobroker/iobroker-data/history 381M /opt/iobroker/iobroker-data/files 123M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/vis-2 The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map 20M /opt/iobroker/iobroker-data/files/fullcalendar.admin/static/js/main.c13d3761.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ConBee_III_DE03218114-if00-port0 *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.19.0 /usr/bin/node v22.19.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.19.0-1nodesource1 Candidate: 22.19.0-1nodesource1 Version table: *** 22.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi2 raspberrypi2 (version: 7.0.7, hostname: raspberrypi2 , alive, uptime: 110835) raspberrypi5 raspberrypi5 (version: 7.0.7, hostname: raspberrypi5 , alive, uptime: 99713) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 2 | +-- samsungtv@0.0.0 (git+https://git@github.com/luca-saggese/samsungtv.git#7fc20107455414e2afb94022682e0787e8635550) +-- iobroker.smartthings@0.2.2 (git+ssh://git@github.com/TA2k/ioBroker.smartthings.git#b055221990231cf4c8b7fbfd6bee94ff59b0fd75) Adapter State + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi5 - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi5 - disabled + system.adapter.backitup.0 : backitup : raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : raspberrypi5 - enabled + system.adapter.device-reminder.0 : device-reminder : raspberrypi5 - enabled system.adapter.devices.0 : devices : raspberrypi5 - disabled + system.adapter.discovery.0 : discovery : raspberrypi5 - enabled + system.adapter.fullcalendar.0 : fullcalendar : raspberrypi5 - enabled + system.adapter.geofency.0 : geofency : raspberrypi5 - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.growatt.0 : growatt : raspberrypi5 - enabled system.adapter.habpanel.0 : habpanel : raspberrypi5 - disabled + system.adapter.history.0 : history : raspberrypi5 - enabled system.adapter.ical.0 : ical : raspberrypi5 - enabled system.adapter.icons-freepic.0 : icons-freepic : raspberrypi5 - disabled system.adapter.icons-material-svg.0 : icons-material-svg : raspberrypi5 - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi5 - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi5 - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi5 - enabled + system.adapter.javascript.0 : javascript : raspberrypi5 - enabled + system.adapter.meross.0 : meross : raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi5 - enabled + system.adapter.pushover.0 : pushover : raspberrypi5 - enabled + system.adapter.reolink.0 : reolink : raspberrypi5 - enabled + system.adapter.reolink.1 : reolink : raspberrypi5 - enabled system.adapter.samsung.0 : samsung : raspberrypi5 - disabled system.adapter.samsung_tizen.0 : samsung_tizen : raspberrypi5 - disabled, port: 8002 + system.adapter.scenes.0 : scenes : raspberrypi5 - enabled + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 system.adapter.smartthings.0 : smartthings : raspberrypi5 - disabled + system.adapter.sonoff.0 : sonoff : raspberrypi2 - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi5 - enabled + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi5 - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi5 - enabled + system.adapter.tuya.0 : tuya : raspberrypi5 - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi5 - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi5 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi5 - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi5 - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi5 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi5 - disabled system.adapter.vis.0 : vis : raspberrypi5 - enabled + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi5 - enabled system.adapter.yr.0 : yr : raspberrypi5 - enabled + system.adapter.zigbee2mqtt.1 : zigbee2mqtt : raspberrypi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.geofency.0 : geofency : raspberrypi5 - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.influxdb.0 : influxdb : raspberrypi5 - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi2 - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "fullcalendar" : 2.4.5 , installed 2.4.5 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "growatt" : 3.3.1 , installed 3.3.1 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "icons-freepic": 1.0.0 , installed 1.0.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "samsung" : 0.6.1 , installed 0.6.1 Adapter "samsung_tizen": 1.1.0 , installed 1.1.0 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.2.0 , installed 10.1.0 [Updatable] Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.4 , installed 2.13.4 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.18.0 , installed 1.18.0 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 14307 States: 11426 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Get:6 https://apt.grafana.com stable InRelease [7661 B] Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://repo.mosquitto.org/debian bookworm InRelease Err:6 https://apt.grafana.com stable InRelease The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 13481 2232/node-red tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 13669 2493/io.shelly.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 113 5712 826/mosquitto tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 12770 2448/io.mqtt.1 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 12771 2448/io.mqtt.1 tcp 0 0 0.0.0.0:42545 0.0.0.0:* LISTEN 1001 14969 2551/io.yahka.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4964 839/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 725830 76392/cupsd tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 14338 2031/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 11261 2031/iobroker.js-co tcp 0 0 127.0.0.1:35259 0.0.0.0:* LISTEN 1001 974326 2551/io.yahka.0 tcp6 0 0 :::1884 :::* LISTEN 113 5713 826/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 4966 839/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 725829 76392/cupsd tcp6 0 0 :::7999 :::* LISTEN 1001 12219 2389/io.geofency.0 tcp6 0 0 :::8081 :::* LISTEN 1001 11813 2082/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 15708 2768/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 10181 1440/influxd tcp6 0 0 :::3000 :::* LISTEN 112 13322 2030/grafana udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5597 652/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 13692 2508/io.shelly.1 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 12853 2532/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 12854 2532/io.tuya.0 udp 0 0 0.0.0.0:55972 0.0.0.0:* 104 5599 652/avahi-daemon: r udp6 0 0 :::5353 :::* 104 5598 652/avahi-daemon: r udp6 0 0 :::43836 :::* 104 5600 652/avahi-daemon: r udp6 0 0 fe80::201f:2fec:9bc:546 :::* 0 10723 783/NetworkManager *** Log File - Last 25 Lines *** 2025-09-23 11:24:56.154 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:24:57.154 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:24:58.156 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:24:59.157 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:00.161 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:01.161 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:02.162 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:03.164 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:04.164 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:05.166 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:06.167 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:07.167 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:08.167 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:09.169 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:10.170 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:11.172 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:12.173 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:13.173 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:14.173 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:15.175 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:16.176 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:17.177 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:18.178 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:19.179 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:20.180 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds...============ Mark until here for C&P =============
iob diag has finished.
Gruß Mico -
Hiermal die iob diag
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi5 Icon name: computer Kernel: Linux 6.12.34+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 11:24:49 up 1 day, 3:42, 4 users, load average: 0.25, 0.20, 0.26 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** TIME AND TIMEZONES *** Local time: Tue 2025-09-23 11:24:49 CEST Universal time: Tue 2025-09-23 09:24:49 UTC RTC time: Tue 2025-09-23 09:24:49 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.1G 1.9G 28M 2.6G 4.4G Swap: 209M 0B 209M Total: 8.7G 4.1G 2.1G Active iob-Instances: 34 8063 M total memory 3902 M used memory 4344 M active memory 1354 M inactive memory 1832 M free memory 193 M buffer memory 2249 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 11:24:50 up 1 day, 3:42, 4 users, load average: 0.25, 0.20, 0.26 Tasks: 264 total, 1 running, 263 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 66.7 id, 33.3 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.2 total, 1832.7 free, 3902.8 used, 2443.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 4160.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 6.0M 1.6G 1% /run /dev/mmcblk0p2 ext4 58G 52G 3.5G 94% / tmpfs tmpfs 4.0G 400K 4.0G 1% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 807M 176K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Sep 22 07:42:33 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:32:68:16 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=a84847a9-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Sep 22 07:42:34 2025] EXT4-fs (mmcblk0p2): mounted filesystem 5170097f-f1f6-42d8-a2ff-8938cbdfa7be ro with ordered data mode. Quota mode: none. [Mon Sep 22 07:42:35 2025] EXT4-fs (mmcblk0p2): re-mounted 5170097f-f1f6-42d8-a2ff-8938cbdfa7be r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 41G /var/ 38G /var/lib/influxdb/engine/data 38G /var/lib/influxdb/engine 38G /var/lib/influxdb 38G /var/lib Archived and active journals take up 2.3G in the file system. /opt/iobroker/backups: 90M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 855M /opt/iobroker/iobroker-data/history 381M /opt/iobroker/iobroker-data/files 123M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/vis-2 The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map 20M /opt/iobroker/iobroker-data/files/fullcalendar.admin/static/js/main.c13d3761.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ConBee_III_DE03218114-if00-port0 *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.19.0 /usr/bin/node v22.19.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.19.0-1nodesource1 Candidate: 22.19.0-1nodesource1 Version table: *** 22.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi2 raspberrypi2 (version: 7.0.7, hostname: raspberrypi2 , alive, uptime: 110835) raspberrypi5 raspberrypi5 (version: 7.0.7, hostname: raspberrypi5 , alive, uptime: 99713) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 2 | +-- samsungtv@0.0.0 (git+https://git@github.com/luca-saggese/samsungtv.git#7fc20107455414e2afb94022682e0787e8635550) +-- iobroker.smartthings@0.2.2 (git+ssh://git@github.com/TA2k/ioBroker.smartthings.git#b055221990231cf4c8b7fbfd6bee94ff59b0fd75) Adapter State + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi5 - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi5 - disabled + system.adapter.backitup.0 : backitup : raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : raspberrypi5 - enabled + system.adapter.device-reminder.0 : device-reminder : raspberrypi5 - enabled system.adapter.devices.0 : devices : raspberrypi5 - disabled + system.adapter.discovery.0 : discovery : raspberrypi5 - enabled + system.adapter.fullcalendar.0 : fullcalendar : raspberrypi5 - enabled + system.adapter.geofency.0 : geofency : raspberrypi5 - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.growatt.0 : growatt : raspberrypi5 - enabled system.adapter.habpanel.0 : habpanel : raspberrypi5 - disabled + system.adapter.history.0 : history : raspberrypi5 - enabled system.adapter.ical.0 : ical : raspberrypi5 - enabled system.adapter.icons-freepic.0 : icons-freepic : raspberrypi5 - disabled system.adapter.icons-material-svg.0 : icons-material-svg : raspberrypi5 - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi5 - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi5 - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi5 - enabled + system.adapter.javascript.0 : javascript : raspberrypi5 - enabled + system.adapter.meross.0 : meross : raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi5 - enabled + system.adapter.pushover.0 : pushover : raspberrypi5 - enabled + system.adapter.reolink.0 : reolink : raspberrypi5 - enabled + system.adapter.reolink.1 : reolink : raspberrypi5 - enabled system.adapter.samsung.0 : samsung : raspberrypi5 - disabled system.adapter.samsung_tizen.0 : samsung_tizen : raspberrypi5 - disabled, port: 8002 + system.adapter.scenes.0 : scenes : raspberrypi5 - enabled + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 system.adapter.smartthings.0 : smartthings : raspberrypi5 - disabled + system.adapter.sonoff.0 : sonoff : raspberrypi2 - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi5 - enabled + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi5 - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi5 - enabled + system.adapter.tuya.0 : tuya : raspberrypi5 - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi5 - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi5 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi5 - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi5 - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi5 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi5 - disabled system.adapter.vis.0 : vis : raspberrypi5 - enabled + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi5 - enabled system.adapter.yr.0 : yr : raspberrypi5 - enabled + system.adapter.zigbee2mqtt.1 : zigbee2mqtt : raspberrypi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.geofency.0 : geofency : raspberrypi5 - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.influxdb.0 : influxdb : raspberrypi5 - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi2 - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "fullcalendar" : 2.4.5 , installed 2.4.5 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "growatt" : 3.3.1 , installed 3.3.1 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "icons-freepic": 1.0.0 , installed 1.0.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "samsung" : 0.6.1 , installed 0.6.1 Adapter "samsung_tizen": 1.1.0 , installed 1.1.0 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.2.0 , installed 10.1.0 [Updatable] Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.4 , installed 2.13.4 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.18.0 , installed 1.18.0 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 14307 States: 11426 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Get:6 https://apt.grafana.com stable InRelease [7661 B] Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://repo.mosquitto.org/debian bookworm InRelease Err:6 https://apt.grafana.com stable InRelease The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com> W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 13481 2232/node-red tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 13669 2493/io.shelly.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 113 5712 826/mosquitto tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 12770 2448/io.mqtt.1 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 12771 2448/io.mqtt.1 tcp 0 0 0.0.0.0:42545 0.0.0.0:* LISTEN 1001 14969 2551/io.yahka.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4964 839/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 725830 76392/cupsd tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 14338 2031/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 11261 2031/iobroker.js-co tcp 0 0 127.0.0.1:35259 0.0.0.0:* LISTEN 1001 974326 2551/io.yahka.0 tcp6 0 0 :::1884 :::* LISTEN 113 5713 826/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 4966 839/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 725829 76392/cupsd tcp6 0 0 :::7999 :::* LISTEN 1001 12219 2389/io.geofency.0 tcp6 0 0 :::8081 :::* LISTEN 1001 11813 2082/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 15708 2768/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 10181 1440/influxd tcp6 0 0 :::3000 :::* LISTEN 112 13322 2030/grafana udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5597 652/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 13692 2508/io.shelly.1 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 12853 2532/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 12854 2532/io.tuya.0 udp 0 0 0.0.0.0:55972 0.0.0.0:* 104 5599 652/avahi-daemon: r udp6 0 0 :::5353 :::* 104 5598 652/avahi-daemon: r udp6 0 0 :::43836 :::* 104 5600 652/avahi-daemon: r udp6 0 0 fe80::201f:2fec:9bc:546 :::* 0 10723 783/NetworkManager *** Log File - Last 25 Lines *** 2025-09-23 11:24:56.154 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:24:57.154 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:24:58.156 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:24:59.157 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:00.161 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:01.161 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:02.162 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:03.164 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:04.164 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:05.166 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:06.167 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:07.167 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:08.167 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:09.169 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:10.170 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:11.172 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:12.173 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:13.173 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:14.173 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:15.175 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:16.176 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:17.177 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:18.178 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:19.179 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds... 2025-09-23 11:25:20.180 - warn: zigbee2mqtt.1 (29444) Start try again in 1 seconds...============ Mark until here for C&P =============
iob diag has finished.
Gruß Mico@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred
~ Throttling has occurred
~ Soft temperature limit has occurredDa ist die Spannungsversorgung zu knapp.
System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'
Betreib die Kiste ohne graphische Oberfläche.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs engineering@grafana.com
Leg das Grafana-Repository neu an.
Zu zigbee2mqtt:
systemctl status zigbee2mqttsagt?
-
@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred
~ Throttling has occurred
~ Soft temperature limit has occurredDa ist die Spannungsversorgung zu knapp.
System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'
Betreib die Kiste ohne graphische Oberfläche.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs engineering@grafana.com
Leg das Grafana-Repository neu an.
Zu zigbee2mqtt:
systemctl status zigbee2mqttsagt?
@thomas-braun said in zigbee2mqtt läuft sein heute morgen nicht mehr:
systemctl status zigbee2mqtt
Grafana nutze ich gar nicht wirklich hatte dieses nur mitinstaliert brauche ich bisher nicht.
pi@raspberrypi5:/opt/zigbee2mqtt $ systemctl status zigbee2mqtt ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; preset: enabled) Active: active (running) since Tue 2025-09-23 11:59:07 CEST; 44s ago Main PID: 131911 (node) Tasks: 11 (limit: 9572) CPU: 3.211s CGroup: /system.slice/zigbee2mqtt.service └─131911 /usr/bin/node index.js Sep 23 11:59:07 raspberrypi5 systemd[1]: Started zigbee2mqtt.service - zigbee2mqtt. Sep 23 11:59:10 raspberrypi5 node[131911]: [2025-09-23 11:59:10] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Keller', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":0,"indicator_mode":"off/on","linkquality":80,"power":0,"power_o> Sep 23 11:59:19 raspberrypi5 node[131911]: [2025-09-23 11:59:19] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/SNZB-02 Gästezimmer', payload '{"battery":100,"humidity":71.5,"linkquality":131,"temperature":18.08,"voltage":3000}' Sep 23 11:59:25 raspberrypi5 node[131911]: [2025-09-23 11:59:25] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Mückensteckdose', payload '{"child_lock":"UNLOCK","current":0.02,"energy":3.39,"indicator_mode":"off","linkquality":29,"power":3,"power_outage_memory> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Fernseherleiste', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.24,"energy":88.88,"indicator_mode":"off/on","linkquality":138,"power":28,> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Fernseherleiste', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.24,"energy":90.27,"indicator_mode":"off/on","linkquality":138,"power":28,> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/IR-Licht Steuerung-01', payload '{"countdown":0,"current":0,"energy":1.92,"indicator_mode":"off","linkquality":80,"power":0,"state":"OFF","update":{"> Sep 23 11:59:28 raspberrypi5 node[131911]: [2025-09-23 11:59:28] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/SNZB-02 Bad', payload '{"battery":100,"humidity":78.68,"linkquality":80,"temperature":21.74,"voltage":3000}' Sep 23 11:59:33 raspberrypi5 node[131911]: [2025-09-23 11:59:33] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Wasch-Küche', payload '{"child_lock":"UNLOCK","current":0,"energy":6.32,"indicator_mode":"off","linkquality":80,"power":0,"power_outage_mem> Sep 23 11:59:48 raspberrypi5 node[131911]: [2025-09-23 11:59:48] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Küche', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.03,"energy":7.75,"indicator_mode":"off/on","linkquality":36,"power":3,"po> lines 1-19/19 (END)Was hat das zu sagen von der pnpm
pi@raspberrypi5:/opt/zigbee2mqtt $ sudo pnpm start > zigbee2mqtt@2.6.1 start /opt/zigbee2mqtt > node index.js Starting Zigbee2MQTT without watchdog. [2025-09-23 11:57:42] info: z2m: Logging to console, file (filename: log.log) [2025-09-23 11:57:43] info: z2m: Starting Zigbee2MQTT version 2.6.1 (commit #d44463a3) [2025-09-23 11:57:43] info: z2m: Starting zigbee-herdsman (6.0.4) [2025-09-23 11:57:43] info: zh:zstack:znp: Opening TCP socket with 192.168.178.103:6638 [2025-09-23 11:57:43] info: zh:zstack:znp: Socket connected [2025-09-23 11:57:43] info: zh:zstack:znp: Socket ready [2025-09-23 11:57:43] info: zh:zstack:znp: Writing CC2530/CC2531 skip bootloader payload [2025-09-23 11:57:44] info: zh:zstack:znp: Skip bootloader for CC2652/CC1352 [2025-09-23 11:58:10] error: z2m: Error while starting zigbee-herdsman [2025-09-23 11:58:10] error: z2m: Failed to start zigbee-herdsman [2025-09-23 11:58:10] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions [2025-09-23 11:58:10] error: z2m: Exiting... [2025-09-23 11:58:10] error: z2m: TypeError: Cannot read properties of undefined (reading 'payload') at AdapterNvMemory.readExtendedTableEntry (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-nv-memory.ts:219:30) at processTicksAndRejections (node:internal/process/task_queues:105:5) at AdapterNvMemory.readTable (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-nv-memory.ts:365:28) at AdapterBackup.getNetworkSecurityMaterialTable (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-backup.ts:508:20) at AdapterBackup.restoreBackup (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-backup.ts:288:44) at ZnpAdapterManager.beginRestore (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/manager.ts:316:9) at ZnpAdapterManager.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/manager.ts:78:21) at ZStackAdapter.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:154:16) at Controller.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/controller/controller.ts:133:29) at Zigbee.start (/opt/zigbee2mqtt/lib/zigbee.ts:67:27) ELIFECYCLE Command failed with exit code 1.Gruß
Mico -
@thomas-braun said in zigbee2mqtt läuft sein heute morgen nicht mehr:
systemctl status zigbee2mqtt
Grafana nutze ich gar nicht wirklich hatte dieses nur mitinstaliert brauche ich bisher nicht.
pi@raspberrypi5:/opt/zigbee2mqtt $ systemctl status zigbee2mqtt ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; preset: enabled) Active: active (running) since Tue 2025-09-23 11:59:07 CEST; 44s ago Main PID: 131911 (node) Tasks: 11 (limit: 9572) CPU: 3.211s CGroup: /system.slice/zigbee2mqtt.service └─131911 /usr/bin/node index.js Sep 23 11:59:07 raspberrypi5 systemd[1]: Started zigbee2mqtt.service - zigbee2mqtt. Sep 23 11:59:10 raspberrypi5 node[131911]: [2025-09-23 11:59:10] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Keller', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":0,"indicator_mode":"off/on","linkquality":80,"power":0,"power_o> Sep 23 11:59:19 raspberrypi5 node[131911]: [2025-09-23 11:59:19] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/SNZB-02 Gästezimmer', payload '{"battery":100,"humidity":71.5,"linkquality":131,"temperature":18.08,"voltage":3000}' Sep 23 11:59:25 raspberrypi5 node[131911]: [2025-09-23 11:59:25] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Mückensteckdose', payload '{"child_lock":"UNLOCK","current":0.02,"energy":3.39,"indicator_mode":"off","linkquality":29,"power":3,"power_outage_memory> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Fernseherleiste', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.24,"energy":88.88,"indicator_mode":"off/on","linkquality":138,"power":28,> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Fernseherleiste', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.24,"energy":90.27,"indicator_mode":"off/on","linkquality":138,"power":28,> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/IR-Licht Steuerung-01', payload '{"countdown":0,"current":0,"energy":1.92,"indicator_mode":"off","linkquality":80,"power":0,"state":"OFF","update":{"> Sep 23 11:59:28 raspberrypi5 node[131911]: [2025-09-23 11:59:28] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/SNZB-02 Bad', payload '{"battery":100,"humidity":78.68,"linkquality":80,"temperature":21.74,"voltage":3000}' Sep 23 11:59:33 raspberrypi5 node[131911]: [2025-09-23 11:59:33] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Wasch-Küche', payload '{"child_lock":"UNLOCK","current":0,"energy":6.32,"indicator_mode":"off","linkquality":80,"power":0,"power_outage_mem> Sep 23 11:59:48 raspberrypi5 node[131911]: [2025-09-23 11:59:48] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Küche', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.03,"energy":7.75,"indicator_mode":"off/on","linkquality":36,"power":3,"po> lines 1-19/19 (END)Was hat das zu sagen von der pnpm
pi@raspberrypi5:/opt/zigbee2mqtt $ sudo pnpm start > zigbee2mqtt@2.6.1 start /opt/zigbee2mqtt > node index.js Starting Zigbee2MQTT without watchdog. [2025-09-23 11:57:42] info: z2m: Logging to console, file (filename: log.log) [2025-09-23 11:57:43] info: z2m: Starting Zigbee2MQTT version 2.6.1 (commit #d44463a3) [2025-09-23 11:57:43] info: z2m: Starting zigbee-herdsman (6.0.4) [2025-09-23 11:57:43] info: zh:zstack:znp: Opening TCP socket with 192.168.178.103:6638 [2025-09-23 11:57:43] info: zh:zstack:znp: Socket connected [2025-09-23 11:57:43] info: zh:zstack:znp: Socket ready [2025-09-23 11:57:43] info: zh:zstack:znp: Writing CC2530/CC2531 skip bootloader payload [2025-09-23 11:57:44] info: zh:zstack:znp: Skip bootloader for CC2652/CC1352 [2025-09-23 11:58:10] error: z2m: Error while starting zigbee-herdsman [2025-09-23 11:58:10] error: z2m: Failed to start zigbee-herdsman [2025-09-23 11:58:10] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions [2025-09-23 11:58:10] error: z2m: Exiting... [2025-09-23 11:58:10] error: z2m: TypeError: Cannot read properties of undefined (reading 'payload') at AdapterNvMemory.readExtendedTableEntry (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-nv-memory.ts:219:30) at processTicksAndRejections (node:internal/process/task_queues:105:5) at AdapterNvMemory.readTable (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-nv-memory.ts:365:28) at AdapterBackup.getNetworkSecurityMaterialTable (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-backup.ts:508:20) at AdapterBackup.restoreBackup (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-backup.ts:288:44) at ZnpAdapterManager.beginRestore (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/manager.ts:316:9) at ZnpAdapterManager.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/manager.ts:78:21) at ZStackAdapter.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:154:16) at Controller.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/controller/controller.ts:133:29) at Zigbee.start (/opt/zigbee2mqtt/lib/zigbee.ts:67:27) ELIFECYCLE Command failed with exit code 1.Gruß
Mico@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
Grafana nutze ich gar nicht wirklich hatte dieses nur mitinstaliert brauche ich bisher nicht.
Egal, korrigier das.
[2025-09-23 11:58:10] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions
Schau da mal rein.
-
@thomas-braun said in zigbee2mqtt läuft sein heute morgen nicht mehr:
systemctl status zigbee2mqtt
Grafana nutze ich gar nicht wirklich hatte dieses nur mitinstaliert brauche ich bisher nicht.
pi@raspberrypi5:/opt/zigbee2mqtt $ systemctl status zigbee2mqtt ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; preset: enabled) Active: active (running) since Tue 2025-09-23 11:59:07 CEST; 44s ago Main PID: 131911 (node) Tasks: 11 (limit: 9572) CPU: 3.211s CGroup: /system.slice/zigbee2mqtt.service └─131911 /usr/bin/node index.js Sep 23 11:59:07 raspberrypi5 systemd[1]: Started zigbee2mqtt.service - zigbee2mqtt. Sep 23 11:59:10 raspberrypi5 node[131911]: [2025-09-23 11:59:10] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Keller', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":0,"indicator_mode":"off/on","linkquality":80,"power":0,"power_o> Sep 23 11:59:19 raspberrypi5 node[131911]: [2025-09-23 11:59:19] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/SNZB-02 Gästezimmer', payload '{"battery":100,"humidity":71.5,"linkquality":131,"temperature":18.08,"voltage":3000}' Sep 23 11:59:25 raspberrypi5 node[131911]: [2025-09-23 11:59:25] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Mückensteckdose', payload '{"child_lock":"UNLOCK","current":0.02,"energy":3.39,"indicator_mode":"off","linkquality":29,"power":3,"power_outage_memory> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Fernseherleiste', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.24,"energy":88.88,"indicator_mode":"off/on","linkquality":138,"power":28,> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Fernseherleiste', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.24,"energy":90.27,"indicator_mode":"off/on","linkquality":138,"power":28,> Sep 23 11:59:26 raspberrypi5 node[131911]: [2025-09-23 11:59:26] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/IR-Licht Steuerung-01', payload '{"countdown":0,"current":0,"energy":1.92,"indicator_mode":"off","linkquality":80,"power":0,"state":"OFF","update":{"> Sep 23 11:59:28 raspberrypi5 node[131911]: [2025-09-23 11:59:28] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/SNZB-02 Bad', payload '{"battery":100,"humidity":78.68,"linkquality":80,"temperature":21.74,"voltage":3000}' Sep 23 11:59:33 raspberrypi5 node[131911]: [2025-09-23 11:59:33] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Wasch-Küche', payload '{"child_lock":"UNLOCK","current":0,"energy":6.32,"indicator_mode":"off","linkquality":80,"power":0,"power_outage_mem> Sep 23 11:59:48 raspberrypi5 node[131911]: [2025-09-23 11:59:48] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose Küche', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.03,"energy":7.75,"indicator_mode":"off/on","linkquality":36,"power":3,"po> lines 1-19/19 (END)Was hat das zu sagen von der pnpm
pi@raspberrypi5:/opt/zigbee2mqtt $ sudo pnpm start > zigbee2mqtt@2.6.1 start /opt/zigbee2mqtt > node index.js Starting Zigbee2MQTT without watchdog. [2025-09-23 11:57:42] info: z2m: Logging to console, file (filename: log.log) [2025-09-23 11:57:43] info: z2m: Starting Zigbee2MQTT version 2.6.1 (commit #d44463a3) [2025-09-23 11:57:43] info: z2m: Starting zigbee-herdsman (6.0.4) [2025-09-23 11:57:43] info: zh:zstack:znp: Opening TCP socket with 192.168.178.103:6638 [2025-09-23 11:57:43] info: zh:zstack:znp: Socket connected [2025-09-23 11:57:43] info: zh:zstack:znp: Socket ready [2025-09-23 11:57:43] info: zh:zstack:znp: Writing CC2530/CC2531 skip bootloader payload [2025-09-23 11:57:44] info: zh:zstack:znp: Skip bootloader for CC2652/CC1352 [2025-09-23 11:58:10] error: z2m: Error while starting zigbee-herdsman [2025-09-23 11:58:10] error: z2m: Failed to start zigbee-herdsman [2025-09-23 11:58:10] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions [2025-09-23 11:58:10] error: z2m: Exiting... [2025-09-23 11:58:10] error: z2m: TypeError: Cannot read properties of undefined (reading 'payload') at AdapterNvMemory.readExtendedTableEntry (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-nv-memory.ts:219:30) at processTicksAndRejections (node:internal/process/task_queues:105:5) at AdapterNvMemory.readTable (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-nv-memory.ts:365:28) at AdapterBackup.getNetworkSecurityMaterialTable (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-backup.ts:508:20) at AdapterBackup.restoreBackup (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/adapter-backup.ts:288:44) at ZnpAdapterManager.beginRestore (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/manager.ts:316:9) at ZnpAdapterManager.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/manager.ts:78:21) at ZStackAdapter.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:154:16) at Controller.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@6.0.4/node_modules/zigbee-herdsman/src/controller/controller.ts:133:29) at Zigbee.start (/opt/zigbee2mqtt/lib/zigbee.ts:67:27) ELIFECYCLE Command failed with exit code 1.Gruß
Mico@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
sudo pnpm start
Und da bin ich nicht sicher, ob das der richtige und beste Weg ist zigbee2mqtt zu starten.
Das macht man eigentlich über die systemd-Services, wenn es die ja schon gibt. Alsosystemctl [start|stop|restart] zigbee2mqtt.service -
@mico sagte in zigbee2mqtt läuft sein heute morgen nicht mehr:
sudo pnpm start
Und da bin ich nicht sicher, ob das der richtige und beste Weg ist zigbee2mqtt zu starten.
Das macht man eigentlich über die systemd-Services, wenn es die ja schon gibt. Alsosystemctl [start|stop|restart] zigbee2mqtt.service@thomas-braun ne du ist es auch nicht... das ist nur mal zum starten wenn du debug infos haben willst..
@Mico hier steht alles beschrieben und bitte die Seite zu ende lesen
https://www.zigbee2mqtt.io/guide/installation/01_linux.html#starting-zigbee2mqtt
Support us
755
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge