Neuer Adapter ioBroker.evcc

Chriz

@thomas-braun said in Neuer Adapter ioBroker.evcc:

iob nodejs-update

wenn ich aber

iob nodejs-update

mache sagt er mir er ist auf der neusten Version.
Macht auch Sinn bei dem Befehl, was muss ich eingeben um die alte/empfohlene Version zu bekommen?

iobroker.inst@3.0.0 /opt/iobroker
└─┬ iobroker.ring@6.3.0
  └── ring-client-api@13.1.0

Jetzt muss ich nochmal vorsichtig weiterfragen.
Das hat nix mit dem Ring Adapter(IPCams/Klingel/usw.) zu tun, oder?
Denn den nutze ich schon seit Monaten/Jahren nicht mehr.

Thomas Braun

@chriz sagte in Neuer Adapter ioBroker.evcc:

mache sagt er mir er ist auf der neusten Version.

Eigentlich sollte dir vorgeschlagen werden statt der installierten 22 die Version 20 zu installieren.
Sieht so aus:


Nothing to do - Your installation is using the correct paths.

You are running nodejs v24.5.0. Do you want to install recommended version 20.19.4? 

Press <y> to continue or any other key to quit

Und die Dependency hängt im ring-Adapter. Wenn du den nicht mehr verwendest, schmeiß ihn raus.
Sollte man grundsätzlich machen. Was nicht benötigt wird hat auf dem System nix verloren. Alleine schon aus Sicherheitsaspekten. Nicht laufender Code kann auch keine Lücken haben.

Chriz

@thomas-braun
das ist ja das komische, den Adapter habe ich schon seit Ewigkeiten nicht mehr installiert.
Habe gerade gesehen es waren noch 3 Objekte vom Ringadapter da, aber die hab ich nun auch rausgeworfen.

Hat aber auch nichts gebracht :(, gleiche Fehlermeldung. Ich weiß gar nicht wo da noch was sein soll. Hab sogar im Dockercontainer die alten node_modules rausgeworfen...

Thomas Braun

@chriz

Gib mal per Ausgabe von

iob diag

einen Überblick über die Kiste.

das ist ja das komische, den Adapter habe ich schon seit Ewigkeiten nicht mehr installiert.

Da isser doch...

iobroker.inst@3.0.0 /opt/iobroker
└─┬ iobroker.ring@6.3.0
  └── ring-client-api@13.1.0

Chriz

@thomas-braun
ich finde aber nix mehr mit Ring weder im iobroker selbst, noch im filesystem.

Verstehe auch nicht wieso der Ring Adapter eine Abhängigkeit von dem EVCC Adapter sein kann.
Ich interpretiere die Fehlermeldung so, dass der Ring Adapter eine nötig ist für EVCC und der Ring adapter bzw. ring-client-api max Node20 kann.

Wie kommen diese Abhängigkeiten zustande?

Thomas Braun

@chriz sagte in Neuer Adapter ioBroker.evcc:

Ich verstehe auch nicht wieso der Ring adapter eine Abhängigkeit von dem EVCC adapter sein kann.

Ist es nicht. Aber npm geht bei einer Installation von irgendeinem nodejs-Modul über den gesamten Installationsbaum und schaut ob die Abhängigkeiten bedient werden können.

ich finde aber nix mehr mit Ring weder im iobroker selbst, noch im filesystem.

Aber im node-Projekt ist das noch eingetragen. Da spielt dann auch die Anzeige im Admin oder was du da im Filesystem veranstaltest keine Rolle.

iob del iobroker.ring --debug

liefert?

Ich interpretiere die Fehlermeldung so, dass der Ring Adapter eine nötig ist für EVCC und der Ring adapter bzw. ring-client-api max Node20 kann.

Die erste Hälfte der Vermutung ist falsch.

Thomas Braun

@chriz

cd /opt/iobroker && npm i --dry-run

liefert?

Thomas Braun

@thomas-braun sagte in Neuer Adapter ioBroker.evcc:

Und

Gib mal per Ausgabe von

iob diag

einen Überblick über die Kiste.

Chriz

@thomas-braun
diag:

========== Start marking the full check here ===========

```bash
Script v.2025-03-08

*** BASE SYSTEM ***
Hardware Vendor : To Be Filled By O.E.M.
Kernel          : x86_64
Userland        : 64 bit
Docker          : v11.0.0
Virtualization  : docker
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
19:57:00 up 62 days,  9:32,  0 user,  load average: 6.89, 4.21, 2.91
CPU threads: 8


*** LIFE CYCLE STATUS ***
Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

*** TIME AND TIMEZONES ***
Wed Aug  6 17:57:00 UTC 2025
Wed Aug  6 19:57:00 CEST 2025
CEST +0200
Etc/UTC

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/root
GROUPS=root

User that is running 'js-controller':
iobroker
HOME=/opt/iobroker
GROUPS=users tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 
Terminal: 

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:             12G        5.4G        862M        471M        7.2G        7.1G
Swap:            10G        450M         10G
Total:           23G        5.9G         11G

Active iob-Instances:   24

       11910 M total memory
        5155 M used memory
        4395 M active memory
        4922 M inactive memory
         822 M free memory
           0 M buffer memory
        6905 M swap cache
       10239 M total swap
         429 M used swap
        9810 M free swap

*** top - Table Of Processes  ***
top - 19:57:00 up 62 days,  9:32,  0 user,  load average: 6.89, 4.21, 2.91
Tasks:  32 total,   1 running,  31 sleeping,   0 stopped,   0 zombie
%Cpu(s): 50.0 us,  0.0 sy,  0.0 ni, 50.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :  11910.8 total,    819.0 free,   5158.0 used,   6907.1 buff/cache     
MiB Swap:  10240.0 total,   9810.7 free,    429.3 used.   6752.8 avail Mem 


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type       Size  Used Avail Use% Mounted on
/dev/loop2     btrfs       25G  7.7G   17G  32% /
tmpfs          tmpfs       64M     0   64M   0% /dev
shm            tmpfs       64M     0   64M   0% /dev/shm
shfs           fuse.shfs  932G  528G  402G  57% /opt/iobroker
/dev/loop2     btrfs       25G  7.7G   17G  32% /etc/hosts
tmpfs          tmpfs      5.9G     0  5.9G   0% /proc/acpi
tmpfs          tmpfs      5.9G     0  5.9G   0% /sys/firmware

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET                  SOURCE                                                                                               FSTYPE    OPTIONS
/                       /dev/loop2[/btrfs/subvolumes/29b8ef038abf841abe4a11cce465461999a1f81ae4b20da4deb7d15633aafacf]       btrfs     rw,noatime,ssd,discard=async,space_cache=v2,subvolid=2501,subvol=/btrfs/subvolumes/29b8ef038abf841abe4a11cce465461999a1f81ae4b20da4deb7d15633aafacf
|-/opt/iobroker         shfs[/appdata/iobroker/data]                                                                         fuse.shfs rw,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other
|-/opt/userscripts      shfs[/appdata/iobroker/scripts]                                                                      fuse.shfs rw,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other
|-/etc/resolv.conf      /dev/loop2[/containers/059ff1dc9fbaae111bbe6f890fece639920b55e5713336d396d04877daf2b22f/resolv.conf] btrfs     rw,noatime,ssd,discard=async,space_cache=v2,subvolid=5,subvol=/
|-/etc/hostname         /dev/loop2[/containers/059ff1dc9fbaae111bbe6f890fece639920b55e5713336d396d04877daf2b22f/hostname]    btrfs     rw,noatime,ssd,discard=async,space_cache=v2,subvolid=5,subvol=/
|-/etc/hosts            /dev/loop2[/containers/059ff1dc9fbaae111bbe6f890fece639920b55e5713336d396d04877daf2b22f/hosts]       btrfs     rw,noatime,ssd,discard=async,space_cache=v2,subvolid=5,subvol=/
`-/usr/local/bin/influx shfs[/appdata/influx-cli/influx]                                                                     fuse.shfs ro,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other

Files in neuralgic directories:

/var:
35M     /var/
33M     /var/lib
19M     /var/lib/apt/lists
19M     /var/lib/apt
14M     /var/lib/dpkg


/opt/iobroker/backups:
12M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
393M    /opt/iobroker/iobroker-data/
195M    /opt/iobroker/iobroker-data/files
143M    /opt/iobroker/iobroker-data/backup-objects
48M     /opt/iobroker/iobroker-data/files/iot.admin
47M     /opt/iobroker/iobroker-data/files/iot.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
18M     /opt/iobroker/iobroker-data/objects.jsonl
13M     /opt/iobroker/iobroker-data/objects.json.migrated
13M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
8.8M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_3a866a46ae89eb118f103dc07d11dc1e-if00-port0
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_de4ef275ea5fec118396325f25bfaa52-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_de4ef275ea5fec118396325f25bfaa52-if00-port0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.17.1
/usr/bin/node           v22.17.1
/usr/bin/npm            10.9.2
/usr/bin/npx            10.9.2
/usr/bin/corepack       0.33.0

nodejs:
 Installed: 22.17.1-1nodesource1
 Candidate: 22.18.0-1nodesource1
 Version table:
    22.18.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
*** 22.17.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
       100 /var/lib/dpkg/status
    22.17.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.16.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.15.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.15.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.14.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.13.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.13.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.12.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.11.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.10.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.9.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.8.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.7.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.6.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.5.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.5.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.4.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.4.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.3.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.2.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.1.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    22.0.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
    18.19.0+dfsg-6~deb12u2 500
       500 http://deb.debian.org/debian bookworm/main amd64 Packages
    18.19.0+dfsg-6~deb12u1 500
       500 http://deb.debian.org/debian-security bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
059ff1dc9fba        059ff1dc9fba (version: 7.0.6, hostname: 059ff1dc9fba  , alive, uptime: 305)

Core adapters versions
js-controller:  7.0.6
admin:          7.6.17
javascript:     8.9.2

nodejs modules from github:     1
+-- iobroker.luxtronik2@0.3.1 (git+ssh://git@github.com/UncleSamSwiss/ioBroker.luxtronik2.git#e507d3d188440a4e8cd394648a5b20d75ce9cbb0)

Adapter State
+ system.adapter.admin.0                  : admin                 : 059ff1dc9fba                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : 059ff1dc9fba                             -  enabled
+ system.adapter.backitup.0               : backitup              : 059ff1dc9fba                             -  enabled
+ system.adapter.denon.0                  : denon                 : 059ff1dc9fba                             -  enabled
+ system.adapter.discovery.0              : discovery             : 059ff1dc9fba                             -  enabled
+ system.adapter.homeconnect.0            : homeconnect           : 059ff1dc9fba                             -  enabled
 system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : 059ff1dc9fba                             -  enabled
+ system.adapter.influxdb.0               : influxdb              : 059ff1dc9fba                             -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : 059ff1dc9fba                             -  enabled
+ system.adapter.javascript.0             : javascript            : 059ff1dc9fba                             -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : 059ff1dc9fba                             -  enabled
+ system.adapter.loxone.0                 : loxone                : 059ff1dc9fba                             -  enabled, port: 80
+ system.adapter.luxtronik2.0             : luxtronik2            : 059ff1dc9fba                             -  enabled, port: 8214
+ system.adapter.mqtt.0                   : mqtt                  : 059ff1dc9fba                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.nuki-extended.0          : nuki-extended         : 059ff1dc9fba                             -  enabled
+ system.adapter.sainlogic.0              : sainlogic             : 059ff1dc9fba                             -  enabled, port: 45000, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : 059ff1dc9fba                             -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.signal-cmb.0             : signal-cmb            : 059ff1dc9fba                             -  enabled
+ system.adapter.simple-api.0             : simple-api            : 059ff1dc9fba                             -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartmeter.0             : smartmeter            : 059ff1dc9fba                             -  enabled
+ system.adapter.tr-064.0                 : tr-064                : 059ff1dc9fba                             -  enabled
 system.adapter.vis-history.0            : vis-history           : 059ff1dc9fba                             -  enabled
 system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : 059ff1dc9fba                             -  enabled
 system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : 059ff1dc9fba                             -  enabled
 system.adapter.vis-justgage.0           : vis-justgage          : 059ff1dc9fba                             -  enabled
 system.adapter.vis-material-advanced.0  : vis-material-advanced : 059ff1dc9fba                             -  enabled
 system.adapter.vis-metro.0              : vis-metro             : 059ff1dc9fba                             -  enabled
 system.adapter.vis-timeandweather.0     : vis-timeandweather    : 059ff1dc9fba                             -  enabled
 system.adapter.vis-weather.0            : vis-weather           : 059ff1dc9fba                             -  enabled
 system.adapter.vis.0                    : vis                   : 059ff1dc9fba                             -  enabled
+ system.adapter.vw-connect.1             : vw-connect            : 059ff1dc9fba                             -  enabled
 system.adapter.weatherunderground.0     : weatherunderground    : 059ff1dc9fba                             -  enabled
+ system.adapter.web.0                    : web                   : 059ff1dc9fba                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : 059ff1dc9fba                             -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_de4ef275ea5fec118396325f25bfaa52-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : 059ff1dc9fba                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : 059ff1dc9fba                             -  enabled, port: 8086
+ system.adapter.loxone.0                 : loxone                : 059ff1dc9fba                             -  enabled, port: 80
+ system.adapter.luxtronik2.0             : luxtronik2            : 059ff1dc9fba                             -  enabled, port: 8214
+ system.adapter.mqtt.0                   : mqtt                  : 059ff1dc9fba                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sainlogic.0              : sainlogic             : 059ff1dc9fba                             -  enabled, port: 45000, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : 059ff1dc9fba                             -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : 059ff1dc9fba                             -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : 059ff1dc9fba                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : 059ff1dc9fba                             -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_de4ef275ea5fec118396325f25bfaa52-if00-port0

ioBroker-Repositories
┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name               │ url                                                     │ auto upgrade │
├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): Stable (default)
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: Stable (default)
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "alexa2"       : 3.27.3   , installed 3.27.3
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "denon"        : 1.15.12  , installed 1.15.12
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "homeconnect"  : 1.4.3    , installed 1.4.3
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "lgtv"         : 2.4.0    , installed 2.4.0
Adapter    "loxone"       : 3.0.1    , installed 3.0.1
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "sainlogic"    : 0.11.6   , installed 0.11.6
Adapter    "shelly"       : 10.1.0   , installed 10.1.0
Adapter    "signal-cmb"   : 0.3.0    , installed 0.3.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.12   , installed 2.5.12
Adapter    "weatherunderground": 3.7.0, installed 3.7.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 2.0.5    , installed 2.0.5

Objects and States
Please stand by - This may take a while
Objects:        9366
States:         11370

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending Updates: 4

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      99         720595906  -                   
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      99         720594576  -                   
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      99         720611543  -                   
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      99         720606906  -                   
tcp        0      0 0.0.0.0:45000           0.0.0.0:*               LISTEN      99         720615133  -                   
tcp6       0      0 :::8087                 :::*                    LISTEN      99         720616825  -                   
tcp6       0      0 :::8081                 :::*                    LISTEN      99         720590748  -                   
tcp6       0      0 :::8082                 :::*                    LISTEN      99         720612076  -                   

*** Log File - Last 25 Lines ***

2025-08-06 19:54:03.173  - info: sainlogic.0 (666) starting. Version 0.11.6 in /opt/iobroker/node_modules/iobroker.sainlogic, node: v22.17.1, js-controller: 7.0.6
2025-08-06 19:54:03.183  - info: sainlogic.0 (666) Starting Listener
2025-08-06 19:54:05.162  - info: smartmeter.0 (365) Received 12 values, 7 updated
2025-08-06 19:54:09.728  - info: shelly.0 (495) [MQTT] Device with client id "shellyplusplugs-e465b841db7c" connected from 192.168.84.88!
2025-08-06 19:54:10.765  - info: shelly.0 (495) [MQTT] Device with client id "shellypro3em-34987a46f790" connected from 192.168.84.123!
2025-08-06 19:54:12.351  - info: shelly.0 (495) [MQTT] Device with client id "shellyplus1pm-c82e189576ec" connected from 192.168.84.98!
2025-08-06 19:54:15.739  - info: shelly.0 (495) [MQTT] Device with client id "shellyplus2pm-2cbcbb380fb4" connected from 192.168.84.130!
2025-08-06 19:54:17.122  - info: alexa2.0 (272) Initialization Done ...
2025-08-06 19:54:24.248  - info: shelly.0 (495) [MQTT] Device with client id "shellyplusplugs-e465b8b5e948" connected from 192.168.84.125!
2025-08-06 19:54:36.159  - info: smartmeter.0 (365) Received 12 values, 7 updated
2025-08-06 19:54:40.305  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.Informationen.Anlagenstatus.Betriebszustand" has to be type "number" but received type "string" 
2025-08-06 19:54:48.386  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:55:03.995  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:55:07.159  - info: smartmeter.0 (365) Received 12 values, 7 updated
2025-08-06 19:55:38.162  - info: smartmeter.0 (365) Received 12 values, 8 updated
2025-08-06 19:55:40.287  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:55:50.704  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:56:09.160  - info: smartmeter.0 (365) Received 12 values, 7 updated
2025-08-06 19:56:40.157  - info: smartmeter.0 (365) Received 12 values, 7 updated
2025-08-06 19:56:42.635  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:56:58.231  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:57:08.711  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:57:11.160  - info: smartmeter.0 (365) Received 12 values, 7 updated
2025-08-06 19:57:34.740  - info: luxtronik2.0 (423) State value to set for "luxtronik2.0.values.flowRate" has to be type "number" but received type "string" 
2025-08-06 19:57:42.157  - info: smartmeter.0 (365) Received 12 values, 7 updated


============ Mark until here for C&P =============

iob del iobroker.ring --debug:

Delete adapter "ring"
host.059ff1dc9fba Counted 1 adapter for ring
host.059ff1dc9fba Counted 1 states (system.adapter.ring.*) from states
host.059ff1dc9fba file ring.admin deleted
host.059ff1dc9fba object ring deleted
host.059ff1dc9fba object ring.admin deleted
host.059ff1dc9fba Deleting 2 object(s).
host.059ff1dc9fba Deleting 1 state(s).
Error deleting adapter ring from disk: Cannot find module 'iobroker.ring/io-package.json'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupInstall.js
You might have to delete it yourself!

cd /opt/iobroker && npm i --dry-run

npm error code EBADENGINE
npm error engine Unsupported engine
npm error engine Not compatible with your version of node/npm: ring-client-api@13.1.0
npm error notsup Not compatible with your version of node/npm: ring-client-api@13.1.0
npm error notsup Required: {"node":"^18 || ^20"}
npm error notsup Actual:   {"npm":"10.9.2","node":"v22.17.1"}
npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2025-08-06T18_01_08_129Z-debug-0.log

Thomas Braun

@chriz

Installier mal (temporär) ring@6.4.0 auus dem Beta-Repo.
Falls das sauber funktioniert kannste den dann direkt wieder deinstallieren.

Chriz

@thomas-braun

wie mach ich das? sorry bin für einige Dinge zu laienhaft unterwegs

Thomas Braun

@chriz

Chriz

@thomas-braun
der adapter zeigt ein ähnliches Verhalten wie der erste Versuch das EVCC zu updaten.
es kommt

$ iobroker upload ring --debug

upload [25] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/admin.d.ts admin.d.ts video/mp2t

upload [20] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/de.json i18n/de.json application/json

upload [19] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/en.json i18n/en.json application/json

upload [18] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/es.json i18n/es.json application/json

upload [17] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/fr.json i18n/fr.json application/json

upload [16] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/it.json i18n/it.json application/json

upload [15] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/nl.json i18n/nl.json application/json

upload [14] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/pl.json i18n/pl.json application/json

upload [13] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/pt.json i18n/pt.json application/json

upload [12] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/ru.json i18n/ru.json application/json

upload [11] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/uk.json i18n/uk.json application/json

upload [10] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/i18n/zh-cn.json i18n/zh-cn.json application/json

upload [9] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/index_m.html index_m.html text/html

upload [8] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/jsonConfig.json jsonConfig.json application/json

upload [7] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/preferences-desktop-notification-bell-3.png preferences-desktop-notification-bell-3.png image/png

upload [6] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/preferences-system-login.png preferences-system-login.png image/png

upload [5] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/ring.png ring.png image/png

upload [4] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/style.css style.css text/css

upload [3] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/tab_m.html tab_m.html text/html

upload [2] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/tab_m.js tab_m.js application/javascript

upload [1] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/tsconfig.json tsconfig.json application/json

upload [0] ring.admin /opt/iobroker/node_modules/iobroker.ring/admin/words.js words.js application/javascript

Updating objects from io-package.json for adapter "ring" with version "6.4.0"

Process exited with code 0

Aber er taucht nicht in meinen Adaptern auf.

komischerweise wird mir nun auch angezeigt das ich EVCC noch installiert hätte.
aber auch das ist nicht der Fall, taucht nicht bei Instanzen auf.

Thomas Braun

@chriz

cd /opt/iobroker && npm ls

Chriz

@thomas-braun
da taucht er tatsächlich auf:

iobroker.inst@3.0.0 /opt/iobroker
├── @sentry/node@6.19.7
├── iobroker.admin@7.6.17
├── iobroker.alexa2@3.27.3
├── iobroker.backitup@3.3.5
├── iobroker.denon@1.15.12
├── iobroker.discovery@5.0.0
├── iobroker.homeconnect@1.4.3
├── iobroker.icons-mfd-svg@1.2.0
├── iobroker.influxdb@4.0.2
├── iobroker.iot@3.3.0
├── iobroker.javascript@8.9.2
├── iobroker.js-controller@7.0.6
├── iobroker.lgtv@2.4.0
├── iobroker.loxone@3.0.1
├── iobroker.luxtronik2@0.3.1 (git+ssh://git@github.com/UncleSamSwiss/ioBroker.luxtronik2.git#e507d3d188440a4e8cd394648a5b20d75ce9cbb0)
├── iobroker.mqtt@6.1.2
├── iobroker.nuki-extended@2.7.0
├── iobroker.octoprint@5.1.0
├── iobroker.ring@6.4.0
├── iobroker.sainlogic@0.11.6
├── iobroker.shelly@10.1.0
├── iobroker.signal-cmb@0.3.0
├── iobroker.simple-api@2.8.0
├── iobroker.smartmeter@3.4.0
├── iobroker.socketio@6.7.1
├── iobroker.tr-064@4.3.0
├── iobroker.tuya@3.16.0
├── iobroker.vis-history@1.0.0
├── iobroker.vis-hqwidgets@1.5.1
├── iobroker.vis-jqui-mfd@1.1.1
├── iobroker.vis-justgage@2.1.7
├── iobroker.vis-material-advanced@1.7.4
├── iobroker.vis-metro@1.2.0
├── iobroker.vis-timeandweather@1.2.2
├── iobroker.vis-weather@2.5.12
├── iobroker.vis@1.5.6
├── iobroker.vw-connect@0.0.67
├── iobroker.weatherunderground@3.7.0
├── iobroker.web@7.0.8
├── iobroker.ws@2.6.2
├── iobroker.zigbee@2.0.5
└── luxtronik2@2.4.0

Thomas Braun

@chriz sagte in Neuer Adapter ioBroker.evcc:

da taucht er tatsächlich auf:

Weil GUIs dich anlügen.

iob del ring --debug

Chriz

@thomas-braun said in Neuer Adapter ioBroker.evcc:

iob del ring --debug

oh na das lief jetzt komplett durch.

Delete adapter "ring"
host.059ff1dc9fba Counted 1 meta of ring
host.059ff1dc9fba Counted 1 adapter for ring
host.059ff1dc9fba Counted 1 states (system.adapter.ring.*) from states
host.059ff1dc9fba file ring.admin deleted
host.059ff1dc9fba object ring deleted
host.059ff1dc9fba object ring.admin deleted
host.059ff1dc9fba Deleting 3 object(s).
host.059ff1dc9fba Deleting 1 state(s).

removed 139 packages in 9s

153 packages are looking for funding
  run `npm fund` for details

AUch in der Liste cd /opt/iobroker && npm ls taucht er nicht mehr auf.

Thomas Braun

@chriz sagte in Neuer Adapter ioBroker.evcc:

AUch in der Liste cd /opt/iobroker && npm ls taucht er nicht mehr auf.

Ja, jetzt ist er ja auch sauber entfernt worden.
Fummel da nicht grobschlächtig im Dateisystem mit irgendwelchen Löschaktionen herum.
Sowas läuft unter Linux eigentlich immer über einen entsprechenden Paketmanager (z. B. dpkg, apt, pacman, npm etc.).
Die tragen die Installationen dann auch richtig in den jeweiligen Datenbanken ein und auch wieder aus.

Chriz

@thomas-braun

okay ich werde es mir zu herzen nehmen

Meinst du ich kann jetzt nochmal versuchen den EVCC Adapter zu isntallieren oder sollte ich vorher noch was anderes machen?

Thomas Braun

@chriz

iob add evcc --debug

mal versuchen. Sollte dann jetzt eigentlich durchlaufen.

NEWS

Neuer Adapter ioBroker.evcc

Support us

868
Online

32.0k
Users

80.5k
Topics

1.3m
Posts

NEWS

Neuer Adapter ioBroker.evcc

Support us

868Online

32.0kUsers

80.5kTopics

1.3mPosts

868
Online

32.0k
Users

80.5k
Topics

1.3m
Posts