UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@mcm1957 sagte in Anker Adapter:

kriegst nen npm Fehler

Aber nicht, wenn du andere Adapter installierst oder updatest. Das ist aber gemein!

[mcm1957]

@thomas-braun
hmm
Beim Update von backitup kam ein Fehler (lt. Diskussion in Telegram oder so - habs nicht mehr im Kopf).
Ist aber jedenfalls hier OT.

[Mumpitz]

Hallo Ronny,

vielen Dank für den Anker-Adapter. Klasse Arbeit.

Habe seit heute eine Solix 3 Pro im Einsatz und wollte einen Max-Wert für den Datenpunkt ankersolix2.0.xxxxxxx.solarbank_info.battery_discharge_power über den Statistics-Adapter einbauen. Statistics sagt bei dem Wert aber, dass es weder Boolean noch Number ist und lässt mich dann die Einstellungen für Min/Max-Werte nicht auswählen.

Bei anderen Werten funktioniert es aber. Zum Beispiel für:

statistics.0.temp.minmax.ankersolix2.0.xxxxxxxx.solarbank_info.total_charging_power.dayMax

Wäre toll, wenn du da mal schauen könntes.

Viele Grüße
Uwe

[HeinzOs]

Moin,
von mir auch ein großes Lob für den Adapter! Super Arbeit!
Ich hätte da ein Anliegen: Gibt es eine Beschreibung der Datenpunkte? Interessieren würde mich derzeit der Datenpunkt: "charging_status" Der wechselt zwischen 0 .. 6. Leider habe ich nicht herausgefunden welche Bedingungen zu 0 .. 6 führen. Kann mir da jemand weiterhelfen?
Besten Dank,
Heinz

[UweRLP]

@gluecksmann sagte in Anker Adapter:

Hat jemand mal ein schönes Beispiel wie man das mit dem Energiefluss 2 Adapter visualisiert?

Schön ist Geschmackssache
So habe ich es mal auf die Schnelle visualisiert.

[stenmic]

@uwerlp kannst du mir bitte sagen wie oft die Daten über den Adapter aktualisiert werden bzw. deinen Intervall

[UweRLP]

@stenmic @ronny130286 Als Abrufintervall habe ich 60 Sek. hinterlegt, alle Statistiken deaktiviert. Allerding funktionierts nur so ca. 30-45 Minuten dann kommen keine Daten mehr.
Mir scheints als wenn der Adapter schaut ob Solix-Username sich geändert hat und dann einen neuen Login macht anstatt mit dem Token zu arbeiten. So würde ich den Eintrag "loginAPI: username are different" des LOG interpretieren. Irgendwann mach dann Anker Cloud dicht.

Habe hier eine Solarbank 3

Anbei das Log:

2025-06-16 10:22:36.670  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" enabled
2025-06-16 10:22:37.235  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 4428
2025-06-16 10:22:38.500  - debug: ankersolix2.0 (4428) Redis Objects: Use Redis connection: 127.0.0.1:9001
2025-06-16 10:22:38.525  - debug: ankersolix2.0 (4428) Objects client ready ... initialize now
2025-06-16 10:22:38.526  - debug: ankersolix2.0 (4428) Objects create System PubSub Client
2025-06-16 10:22:38.527  - debug: ankersolix2.0 (4428) Objects create User PubSub Client
2025-06-16 10:22:38.575  - debug: ankersolix2.0 (4428) Objects client initialize lua scripts
2025-06-16 10:22:38.579  - debug: ankersolix2.0 (4428) Objects connected to redis: 127.0.0.1:9001
2025-06-16 10:22:38.611  - debug: ankersolix2.0 (4428) Redis States: Use Redis connection: 127.0.0.1:9000
2025-06-16 10:22:38.628  - debug: ankersolix2.0 (4428) States create System PubSub Client
2025-06-16 10:22:38.629  - debug: ankersolix2.0 (4428) States create User PubSub Client
2025-06-16 10:22:38.662  - debug: ankersolix2.0 (4428) States connected to redis: 127.0.0.1:9000
2025-06-16 10:22:38.734  - info: ankersolix2.0 (4428) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-16 10:22:38.743  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:22:38.745  - debug: ankersolix2.0 (4428) RestoreLoginData: ENOENT: no such file or directory, open 'c:\iobroker\iobroker-data\ankersolix2.0\session.json'
2025-06-16 10:22:39.021  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:22:39.021  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:22:39.023  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:22:39.023  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:22:39.131  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:22:39.132  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:22:39.270  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:22:39.270  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 1292
2025-06-16 10:23:39.280  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:23:39.281  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:23:39.469  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:23:39.469  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:23:39.612  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:23:39.612  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 2696
2025-06-16 10:24:39.619  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:24:39.620  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:24:39.819  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:24:39.819  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:24:39.962  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:24:39.962  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 4084
2025-06-16 10:25:39.971  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:25:39.973  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:25:40.209  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:25:40.209  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:25:40.357  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:25:40.357  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 5446
2025-06-16 10:26:40.361  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:26:40.362  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:26:40.557  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:26:40.557  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:26:40.697  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:26:40.697  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 6893
2025-06-16 10:27:40.698  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:27:40.699  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:27:40.898  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:27:40.898  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:27:41.052  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:27:41.053  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 8249
2025-06-16 10:28:41.076  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:28:41.078  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:28:41.401  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:28:41.401  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:28:41.551  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:28:41.552  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 9633
2025-06-16 10:29:41.556  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:29:41.557  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:29:41.761  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:29:41.762  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:29:41.891  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:29:41.891  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 11053
2025-06-16 10:30:41.901  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:30:41.903  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:30:42.107  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:30:42.107  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:30:42.248  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:30:42.249  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 12390
2025-06-16 10:31:42.262  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:31:42.263  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:31:42.462  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:31:42.462  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:31:42.585  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:31:42.585  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 13832
2025-06-16 10:32:42.592  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:32:42.595  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:32:42.777  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:32:42.778  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:32:42.898  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:32:42.898  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 15176
2025-06-16 10:33:42.906  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:33:42.907  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:33:43.112  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:33:43.112  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:33:43.293  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:33:43.293  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 16682
2025-06-16 10:34:43.308  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:34:43.310  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:34:43.497  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:34:43.497  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:34:43.631  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:34:43.632  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 18130
2025-06-16 10:35:43.637  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:35:43.638  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:35:43.832  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:35:43.833  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:35:43.976  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:35:43.976  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 19557
2025-06-16 10:36:43.979  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:36:43.980  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:36:44.153  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:36:44.153  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:36:44.275  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:36:44.276  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 21075
2025-06-16 10:37:44.277  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:37:44.278  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:37:44.454  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:37:44.455  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:37:44.664  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:37:44.664  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 22498
2025-06-16 10:38:44.666  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:38:44.667  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:38:44.857  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:38:44.857  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:38:44.979  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:38:44.979  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 23998
2025-06-16 10:39:44.995  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:39:44.996  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:39:45.175  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:39:45.175  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:39:45.309  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:39:45.309  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 25419
2025-06-16 10:40:45.317  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:40:45.319  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:40:45.519  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:40:45.519  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:40:45.788  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:40:45.788  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 26869
2025-06-16 10:41:45.793  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:41:45.794  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:41:45.987  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:41:45.988  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:41:46.107  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:41:46.107  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 28297
2025-06-16 10:42:46.108  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:42:46.109  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:42:46.293  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:42:46.294  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:42:46.425  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:42:46.425  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 29710
2025-06-16 10:43:46.437  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:43:46.439  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:43:46.617  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:43:46.617  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:43:46.728  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:43:46.728  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 31148
2025-06-16 10:44:46.735  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:44:46.736  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:44:46.931  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:44:46.931  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:44:47.061  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:44:47.061  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 32542
2025-06-16 10:45:47.065  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:45:47.067  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:45:47.382  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:45:47.382  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:45:47.517  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:45:47.517  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 33938
2025-06-16 10:46:47.522  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:46:47.524  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:46:47.699  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:46:47.699  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:46:47.833  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:46:47.833  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 35350
2025-06-16 10:47:47.837  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:47:47.838  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:47:48.040  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:47:48.040  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:47:48.235  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:47:48.235  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 36729
2025-06-16 10:48:48.244  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:48:48.245  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:48:48.450  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:48:48.450  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:48:48.574  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:48:48.574  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 38194
2025-06-16 10:49:48.589  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:49:48.590  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:49:48.779  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:49:48.779  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:49:48.909  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:49:48.909  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 39662
2025-06-16 10:50:48.919  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:50:48.920  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:50:49.100  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:50:49.100  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:50:49.332  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:50:49.332  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 41223
2025-06-16 10:51:49.345  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:51:49.349  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:51:49.548  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:51:49.548  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:51:49.691  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:51:49.691  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 42678
2025-06-16 10:52:49.704  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:52:49.705  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:52:49.888  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:52:49.888  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:52:50.006  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:52:50.006  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 44131
2025-06-16 10:53:50.020  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:53:50.021  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:53:50.228  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:53:50.228  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:53:50.390  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:53:50.390  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 45520
2025-06-16 10:54:50.403  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:54:50.405  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:54:50.676  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:54:50.676  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:54:50.885  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:54:50.885  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 46917
2025-06-16 10:55:50.894  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:55:50.895  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:55:51.082  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:55:51.082  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:55:51.218  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:55:51.218  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 48327
2025-06-16 10:56:51.220  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:56:51.221  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:56:51.407  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:56:51.407  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:56:51.550  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:56:51.550  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 49763
2025-06-16 10:57:51.559  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:57:51.561  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:57:51.773  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:57:51.773  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:57:51.959  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:57:51.960  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 51286
2025-06-16 10:58:51.966  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:58:51.967  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:58:52.184  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:58:52.184  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:58:52.305  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:58:52.305  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 52741
2025-06-16 10:59:52.312  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 10:59:52.313  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 10:59:52.498  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 10:59:52.498  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 10:59:52.655  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 10:59:52.655  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 54210
2025-06-16 11:00:52.661  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:00:52.662  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:00:52.866  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:00:52.866  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:00:53.001  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:00:53.001  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 55659
2025-06-16 11:01:53.005  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:01:53.006  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:01:53.179  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:01:53.179  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:01:53.318  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:01:53.318  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 57081
2025-06-16 11:02:53.323  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:02:53.325  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:02:53.533  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:02:53.533  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:02:53.671  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:02:53.671  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 58532
2025-06-16 11:03:53.677  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:03:53.678  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:03:53.968  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:03:53.968  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:03:54.136  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:03:54.137  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 60133
2025-06-16 11:04:54.150  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:04:54.153  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:04:54.374  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:04:54.374  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:04:54.520  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:04:54.520  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 61665
2025-06-16 11:05:54.523  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:05:54.523  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:05:54.736  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:05:54.736  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:05:54.876  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:05:54.876  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 63094
2025-06-16 11:06:54.884  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:06:54.884  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:06:55.077  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:06:55.077  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:06:55.199  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:06:55.199  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 64566
2025-06-16 11:07:55.209  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:07:55.210  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:07:55.412  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:07:55.412  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:07:55.553  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:07:55.553  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 66032
2025-06-16 11:08:55.568  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:08:55.569  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:08:55.739  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:08:55.739  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:08:55.856  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:08:55.857  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 67548
2025-06-16 11:09:55.866  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:09:55.867  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:09:56.086  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:09:56.087  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:09:56.211  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:09:56.211  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 69106
2025-06-16 11:10:56.221  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:10:56.222  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:10:56.412  - debug: ankersolix2.0 (4428) LoginResponseCode: 0 => success!
2025-06-16 11:10:56.412  - debug: ankersolix2.0 (4428) Write data to file
2025-06-16 11:10:56.759  - debug: ankersolix2.0 (4428) Published Data.
2025-06-16 11:10:56.759  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 70580
2025-06-16 11:11:56.770  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:11:56.772  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:11:56.899  - debug: ankersolix2.0 (4428) LoginResponseCode: 26161 => Failed to request.
2025-06-16 11:11:56.900  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 71865
2025-06-16 11:12:56.912  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:12:56.914  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:12:57.051  - debug: ankersolix2.0 (4428) LoginResponseCode: 26161 => Failed to request.
2025-06-16 11:12:57.051  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 72150
2025-06-16 11:13:57.054  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:13:57.055  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:13:57.235  - debug: ankersolix2.0 (4428) LoginResponseCode: 26161 => Failed to request.
2025-06-16 11:13:57.235  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 72432
2025-06-16 11:14:57.250  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:14:57.251  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:14:57.394  - debug: ankersolix2.0 (4428) LoginResponseCode: 26161 => Failed to request.
2025-06-16 11:14:57.395  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 72714
2025-06-16 11:15:57.409  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:15:57.410  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:15:57.540  - debug: ankersolix2.0 (4428) LoginResponseCode: 26161 => Failed to request.
2025-06-16 11:15:57.540  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 73000
2025-06-16 11:16:57.552  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:16:57.553  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:16:57.668  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 9 minutes. Please try again later.
2025-06-16 11:16:57.668  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 73282
2025-06-16 11:17:57.679  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:17:57.680  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:17:57.770  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 8 minutes. Please try again later.
2025-06-16 11:17:57.770  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 73569
2025-06-16 11:18:57.774  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:18:57.774  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:18:57.884  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 7 minutes. Please try again later.
2025-06-16 11:18:57.884  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 73855
2025-06-16 11:19:57.891  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:19:57.892  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:19:57.983  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 6 minutes. Please try again later.
2025-06-16 11:19:57.984  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 74139
2025-06-16 11:20:57.987  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:20:57.988  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:20:58.097  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 5 minutes. Please try again later.
2025-06-16 11:20:58.097  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 74422
2025-06-16 11:21:58.099  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:21:58.100  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:21:58.193  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 4 minutes. Please try again later.
2025-06-16 11:21:58.194  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 74704
2025-06-16 11:22:58.195  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:22:58.197  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:22:58.286  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 3 minutes. Please try again later.
2025-06-16 11:22:58.286  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 74999
2025-06-16 11:23:58.286  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:23:58.288  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:23:58.374  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 2 minutes. Please try again later.
2025-06-16 11:23:58.374  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 75282
2025-06-16 11:24:58.381  - debug: ankersolix2.0 (4428) Try to restore data from File
2025-06-16 11:24:58.382  - debug: ankersolix2.0 (4428) loginAPI: username are different
2025-06-16 11:24:58.491  - debug: ankersolix2.0 (4428) LoginResponseCode: 10019 => Due to 5 unsuccessful sign in attempts, your account has been disabled for 1 minutes. Please try again later.
2025-06-16 11:24:58.492  - debug: ankersolix2.0 (4428) Sleeping for 60000ms... TimerId 75573
2025-06-16 11:25:05.889  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" disabled
2025-06-16 11:25:05.889  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 (force=false, process=true)
2025-06-16 11:25:05.896  - info: ankersolix2.0 (4428) Got terminate signal TERMINATE_YOURSELF
2025-06-16 11:25:05.897  - debug: ankersolix2.0 (4428) refreshTimeout: Unload
2025-06-16 11:25:05.897  - info: ankersolix2.0 (4428) terminating
2025-06-16 11:25:05.897  - info: ankersolix2.0 (4428) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-06-16 11:25:05.892  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 send kill signal
2025-06-16 11:25:06.412  - info: ankersolix2.0 (4428) terminating
2025-06-16 11:25:06.499  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

[Volker3.0]

Hallo,
ist es mittlerweile möglich, bei der Solarbank 3 die Entladeleistung zu steuern bzw. über den ioBroker komplett zu stoppen?

Gruß Volker

[ronny130286]

Hallo Zusammen, sorry für die späte Rückmeldung, aber ich komme gerade wenig an den PC um am Adapter weiter zu entwickeln.

@uwerlp
Ich nutzt den Adapter inzwischen auch mit einer Solix 3, so wie dein Log aussieht, stimmt etwas mit den Logindaten nicht bzw. dein Token scheint immer weg zu sein.
Kann es sein, dass du in der App und im Adapter den gleichen Account nutzt?
Weil so ein Token ist fast 14 Tage gültig und das was er bei dir macht, ist sich dauerhaft neu einloggen und einen Token holen.

@Volker3-0
Aktuelle kann man mit dem Adapter nur lesen, das ist dem geschuldet dass wir hier keine richtig Api nutzen, die von Anker zur Verfügung gestellt wird.
Man müsste quasi die komplette App im Adapter nachstellen und dazu fehlt mir gerade die Zeit

[UweRLP]

@ronny130286 sagte in Anker Adapter:

Hallo Zusammen, sorry für die späte Rückmeldung, aber ich komme gerade wenig an den PC um am Adapter weiter zu entwickeln.

Alles gut

@uwerlp
Ich nutzt den Adapter inzwischen auch mit einer Solix 3, so wie dein Log aussieht, stimmt etwas mit den Logindaten nicht bzw. dein Token scheint immer weg zu sein.

So in die Richtung habe ich mir was gedacht, immer wieder ein neuer Login anstatt das Token zu benutzen.
Das Token wird doch in \ioBroker\iobroker-data\ankersolix2.0\session.json gespeichert?
In dem File wird unter anderem auch "nick_name":"fic***" (so mit den drei * ) bei mir abgelegt. Könnte, dass das Problem sein?
"fic" sind zumindest mal die ersten drei Buchstaben von meinem Solix-Username.
Die session.json habe ich auch schon des öfteren, nach stoppen des Adapters gelöscht, wird aber immer wieder mit diesem abgekürztem Nick Name erstellt.
Nick Name ist der Spitzname in der App, der war dort tatsächlich als fic*** eingetragen. Habe ich jetzt mal auf ioBroker geändert und es mit dem Adapter nochmals probiert. Erhalte aber immer noch die Fehlermeldung "loginAPI: username are different".

2025-06-19 07:32:05.499  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" enabled
2025-06-19 07:32:05.956  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 4968
2025-06-19 07:32:07.095  - debug: ankersolix2.0 (4968) Redis Objects: Use Redis connection: 127.0.0.1:9001
2025-06-19 07:32:07.121  - debug: ankersolix2.0 (4968) Objects client ready ... initialize now
2025-06-19 07:32:07.122  - debug: ankersolix2.0 (4968) Objects create System PubSub Client
2025-06-19 07:32:07.122  - debug: ankersolix2.0 (4968) Objects create User PubSub Client
2025-06-19 07:32:07.174  - debug: ankersolix2.0 (4968) Objects client initialize lua scripts
2025-06-19 07:32:07.177  - debug: ankersolix2.0 (4968) Objects connected to redis: 127.0.0.1:9001
2025-06-19 07:32:07.208  - debug: ankersolix2.0 (4968) Redis States: Use Redis connection: 127.0.0.1:9000
2025-06-19 07:32:07.224  - debug: ankersolix2.0 (4968) States create System PubSub Client
2025-06-19 07:32:07.225  - debug: ankersolix2.0 (4968) States create User PubSub Client
2025-06-19 07:32:07.257  - debug: ankersolix2.0 (4968) States connected to redis: 127.0.0.1:9000
2025-06-19 07:32:07.320  - info: ankersolix2.0 (4968) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-19 07:32:07.329  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:32:07.331  - debug: ankersolix2.0 (4968) RestoreLoginData: ENOENT: no such file or directory, open 'c:\iobroker\iobroker-data\ankersolix2.0\session.json'
2025-06-19 07:32:13.661  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:32:13.661  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:32:13.663  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:32:13.664  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:32:13.805  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:32:13.806  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:32:13.948  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:32:13.949  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 1297
2025-06-19 07:33:13.959  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:33:13.960  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:33:14.143  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:33:14.143  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:33:14.256  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:33:14.256  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 2621
2025-06-19 07:34:14.258  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:34:14.260  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:34:14.462  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:34:14.462  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:34:14.596  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:34:14.597  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 3995
2025-06-19 07:35:14.600  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:35:14.601  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:35:14.787  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:35:14.788  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:35:14.939  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:35:14.939  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 5352
2025-06-19 07:36:14.950  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:36:14.952  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:36:15.148  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:36:15.148  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:36:15.300  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:36:15.300  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 6686
2025-06-19 07:37:15.316  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:37:15.317  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:37:15.492  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:37:15.492  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:37:15.608  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:37:15.608  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 8055
2025-06-19 07:38:15.614  - debug: ankersolix2.0 (4968) Try to restore data from File
2025-06-19 07:38:15.615  - debug: ankersolix2.0 (4968) loginAPI: username are different
2025-06-19 07:38:15.772  - debug: ankersolix2.0 (4968) LoginResponseCode: 0 => success!
2025-06-19 07:38:15.772  - debug: ankersolix2.0 (4968) Write data to file
2025-06-19 07:38:15.909  - debug: ankersolix2.0 (4968) Published Data.
2025-06-19 07:38:15.909  - debug: ankersolix2.0 (4968) Sleeping for 60000ms... TimerId 9429
2025-06-19 07:38:43.341  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" disabled
2025-06-19 07:38:43.341  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 (force=false, process=true)
2025-06-19 07:38:43.343  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 send kill signal
2025-06-19 07:38:43.349  - info: ankersolix2.0 (4968) Got terminate signal TERMINATE_YOURSELF
2025-06-19 07:38:43.349  - debug: ankersolix2.0 (4968) refreshTimeout: Unload
2025-06-19 07:38:43.350  - info: ankersolix2.0 (4968) terminating
2025-06-19 07:38:43.350  - info: ankersolix2.0 (4968) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-06-19 07:38:43.858  - info: ankersolix2.0 (4968) terminating
2025-06-19 07:38:43.928  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Achso, ist ein Windows System auf dem ioBroker läuft.

Kann es sein, dass du in der App und im Adapter den gleichen Account nutzt?

Haupt Solix Account läuft permanent auf meinem Handy, den eingeladenen Gast Account hatte ich temporäre auf dem Tablet benutzt zum bestätigen der Einladung und dann App wieder deinstalliert.
Also nein

Jetzt zur Nachkontrolle wieder auf Tablet installiert, Spitzname geändert, App gestoppt und Daten gelöscht.

[ronny130286]

@uwerlp

Ja der Token bzw. die session Daten werden in der \ioBroker\iobroker-data\ankersolix2.0\session.json gespeichert.
Der Nick spielt eigentlich keine Rolle, da zum Login nur deine Email und Passwort benötigt wird.

Wichtig sind dann aus der session.json: user_id, auth_token, token_expires_at

Versuch mal folgendes:

• Adapter stoppen
• session.json löschen
• Login im Adapter neu eingeben => sollte der Speicherbutton aus gegraut sein, dann einmal die Pollingtime +1, dann sollte es wieder gehen.
• Adapter wieder starten

Das mit dem "username different", bedeutet eigentlich, dass die Emailadresse aus dem Adapter, nicht zu der passt was in der session.json steht.

[Cinimod]

Bei mir kommt sporadisch immer diese Fehler-Meldung, hat das sonst noch wer ?
Ist irgendwas zu tun von meiner Seite oder kann ich das ignorieren?

Failed fetching or publishing printer data, Error: SyntaxError: "undefined" is not valid JSON

EDIT:

Ich habe gerade geschaut es gibt einen JSON Datenpunkt: der wird offenbar nicht richtig beschrieben, das könnte meiner Meinung nach mit meiner Error Meldung zu tun haben.

[UweRLP]

@ronny130286 sagte in Anker Adapter:

Versuch mal folgendes:

• Adapter stoppen
• session.json löschen
• Login im Adapter neu eingeben => sollte der Speicherbutton aus gegraut sein, dann einmal die Pollingtime +1, dann sollte es wieder gehen.
• Adapter wieder starten

Erhalte immer noch den Fehler "loginAPI: username are different"

2025-06-20 07:11:19.251  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" enabled
2025-06-20 07:11:19.760  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 12068
2025-06-20 07:11:20.898  - debug: ankersolix2.0 (12068) Redis Objects: Use Redis connection: 127.0.0.1:9001
2025-06-20 07:11:20.933  - debug: ankersolix2.0 (12068) Objects client ready ... initialize now
2025-06-20 07:11:20.934  - debug: ankersolix2.0 (12068) Objects create System PubSub Client
2025-06-20 07:11:20.934  - debug: ankersolix2.0 (12068) Objects create User PubSub Client
2025-06-20 07:11:21.015  - debug: ankersolix2.0 (12068) Objects client initialize lua scripts
2025-06-20 07:11:21.040  - debug: ankersolix2.0 (12068) Objects connected to redis: 127.0.0.1:9001
2025-06-20 07:11:21.093  - debug: ankersolix2.0 (12068) Redis States: Use Redis connection: 127.0.0.1:9000
2025-06-20 07:11:21.121  - debug: ankersolix2.0 (12068) States create System PubSub Client
2025-06-20 07:11:21.122  - debug: ankersolix2.0 (12068) States create User PubSub Client
2025-06-20 07:11:21.157  - debug: ankersolix2.0 (12068) States connected to redis: 127.0.0.1:9000
2025-06-20 07:11:21.225  - info: ankersolix2.0 (12068) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:11:21.235  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:11:21.236  - debug: ankersolix2.0 (12068) RestoreLoginData: ENOENT: no such file or directory, open 'c:\iobroker\iobroker-data\ankersolix2.0\session.json'
2025-06-20 07:11:21.489  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:11:21.489  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:11:21.491  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:11:21.492  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:11:21.591  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:11:21.591  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:11:21.740  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:11:21.741  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 1290
2025-06-20 07:12:21.749  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:12:21.750  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:12:21.944  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:12:21.944  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:12:22.082  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:12:22.082  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 2670
2025-06-20 07:13:22.089  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:13:22.091  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:13:22.258  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:13:22.258  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:13:22.386  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:13:22.387  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 4054
2025-06-20 07:14:22.388  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:14:22.388  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:14:22.562  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:14:22.563  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:14:22.676  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:14:22.676  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 5438
2025-06-20 07:15:22.687  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:15:22.688  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:15:22.874  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:15:22.874  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:15:23.060  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:15:23.060  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 6823
2025-06-20 07:16:23.071  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:16:23.072  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:16:23.269  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:16:23.269  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:16:23.407  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:16:23.408  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 8200
2025-06-20 07:17:23.416  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:17:23.417  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:17:23.604  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:17:23.604  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:17:23.746  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:17:23.746  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 9602
2025-06-20 07:18:23.762  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:18:23.764  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:18:23.946  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:18:23.946  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:18:24.069  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:18:24.070  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 11187
2025-06-20 07:19:24.076  - debug: ankersolix2.0 (12068) Try to restore data from File
2025-06-20 07:19:24.077  - debug: ankersolix2.0 (12068) loginAPI: username are different
2025-06-20 07:19:24.290  - debug: ankersolix2.0 (12068) LoginResponseCode: 0 => success!
2025-06-20 07:19:24.290  - debug: ankersolix2.0 (12068) Write data to file
2025-06-20 07:19:24.407  - debug: ankersolix2.0 (12068) Published Data.
2025-06-20 07:19:24.408  - debug: ankersolix2.0 (12068) Sleeping for 60000ms... TimerId 12642
2025-06-20 07:20:18.677  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" disabled
2025-06-20 07:20:18.677  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 (force=false, process=true)
2025-06-20 07:20:18.688  - info: ankersolix2.0 (12068) Got terminate signal TERMINATE_YOURSELF
2025-06-20 07:20:18.688  - debug: ankersolix2.0 (12068) refreshTimeout: Unload
2025-06-20 07:20:18.689  - info: ankersolix2.0 (12068) terminating
2025-06-20 07:20:18.689  - info: ankersolix2.0 (12068) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-06-20 07:20:18.679  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 send kill signal
2025-06-20 07:20:19.203  - info: ankersolix2.0 (12068) terminating
2025-06-20 07:20:19.278  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Habe nun mal die Holzhammermethode angewendet und den kompletten Adapter (Instance und Adapter) deinstalliert. Dabei ist mir aufgefallen, dass das Verzeichnis "\10.111.112.39\iobroker\iobroker-data\ankersolix2.0" inklusive Inhalt nicht gelöscht wird. So gewollt?

Nun erhalte ich neue Fehlermeldungen und der Adapter wird nicht mehr Grün.

2025-06-20 07:20:59.481  - info: host.DESKTOP-77OGRTU iobroker del ankersolix2 --debug
2025-06-20 07:21:01.058  - info: host.DESKTOP-77OGRTU iobroker Delete adapter "ankersolix2"
2025-06-20 07:21:01.086  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 1 instances of ankersolix2
2025-06-20 07:21:01.190  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 1 meta of ankersolix2
2025-06-20 07:21:01.192  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 1 adapter for ankersolix2
2025-06-20 07:21:01.233  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 1 devices of ankersolix2
2025-06-20 07:21:01.286  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 97 states of ankersolix2
2025-06-20 07:21:01.312  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 14 states of system.adapter.ankersolix2
2025-06-20 07:21:01.331  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 98 states (io.ankersolix2.*) from states
2025-06-20 07:21:01.397  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 6 states (system.adapter.ankersolix2.*) from states
2025-06-20 07:21:02.261  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Counted 17 objects of ankersolix2
2025-06-20 07:21:02.355  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU file ankersolix2.admin deleted
2025-06-20 07:21:02.361  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object ankersolix2 deleted
2025-06-20 07:21:02.364  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object ankersolix2.admin deleted
2025-06-20 07:21:02.365  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Deleting 133 object(s).
2025-06-20 07:21:02.534  - info: host.DESKTOP-77OGRTU object deleted system.adapter.ankersolix2.0
2025-06-20 07:21:02.537  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Deleting 104 state(s).


2025-06-20 07:23:40.799  - info: host.DESKTOP-77OGRTU iobroker NPM version: 10.9.2
2025-06-20 07:23:40.800  - info: host.DESKTOP-77OGRTU iobroker Installing iobroker.ankersolix2@2.1.2... (System call)
2025-06-20 07:23:52.258  - info: host.DESKTOP-77OGRTU iobroker 
2025-06-20 07:23:52.435  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU install adapter ankersolix2
2025-06-20 07:23:52.515  - info: host.DESKTOP-77OGRTU iobroker upload [12] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/ankersolix2.png ankersolix2.png image/png
2025-06-20 07:23:52.520  - info: host.DESKTOP-77OGRTU iobroker upload [11] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/de/translations.json i18n/de/translations.json application/json
2025-06-20 07:23:52.524  - info: host.DESKTOP-77OGRTU iobroker upload [10] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/en/translations.json i18n/en/translations.json application/json
2025-06-20 07:23:52.527  - info: host.DESKTOP-77OGRTU iobroker upload [9] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/es/translations.json i18n/es/translations.json application/json
2025-06-20 07:23:52.531  - info: host.DESKTOP-77OGRTU iobroker upload [8] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
2025-06-20 07:23:52.535  - info: host.DESKTOP-77OGRTU iobroker upload [7] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/it/translations.json i18n/it/translations.json application/json
2025-06-20 07:23:52.539  - info: host.DESKTOP-77OGRTU iobroker upload [6] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
2025-06-20 07:23:52.542  - info: host.DESKTOP-77OGRTU iobroker upload [5] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
2025-06-20 07:23:52.547  - info: host.DESKTOP-77OGRTU iobroker upload [4] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
2025-06-20 07:23:52.556  - info: host.DESKTOP-77OGRTU iobroker upload [3] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
2025-06-20 07:23:52.560  - info: host.DESKTOP-77OGRTU iobroker upload [2] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
2025-06-20 07:23:52.564  - info: host.DESKTOP-77OGRTU iobroker upload [1] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
2025-06-20 07:23:52.568  - info: host.DESKTOP-77OGRTU iobroker upload [0] ankersolix2.admin c:/iobroker/node_modules/iobroker.ankersolix2/admin/jsonConfig.json jsonConfig.json application/json
2025-06-20 07:23:52.660  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2 created/updated
2025-06-20 07:23:52.662  - info: host.DESKTOP-77OGRTU iobroker Updating objects from io-package.json for adapter "ankersolix2" with version "2.1.2"
2025-06-20 07:23:52.748  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU create instance ankersolix2
2025-06-20 07:23:52.753  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.alive created
2025-06-20 07:23:52.755  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.connected created
2025-06-20 07:23:52.757  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.compactMode created
2025-06-20 07:23:52.759  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.cpu created
2025-06-20 07:23:52.762  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.cputime created
2025-06-20 07:23:52.764  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.memHeapUsed created
2025-06-20 07:23:52.766  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.memHeapTotal created
2025-06-20 07:23:52.769  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.memRss created
2025-06-20 07:23:52.771  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.uptime created
2025-06-20 07:23:52.773  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.inputCount created
2025-06-20 07:23:52.775  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.outputCount created
2025-06-20 07:23:52.778  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.eventLoopLag created
2025-06-20 07:23:52.780  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.sigKill created
2025-06-20 07:23:52.782  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0.logLevel created
2025-06-20 07:23:52.784  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object ankersolix2.0.info.apiconnection created
2025-06-20 07:23:52.798  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU Set default value of ankersolix2.0.info.apiconnection: false
2025-06-20 07:23:52.803  - info: host.DESKTOP-77OGRTU iobroker host.DESKTOP-77OGRTU object system.adapter.ankersolix2.0 created
2025-06-20 07:23:53.865  - info: host.DESKTOP-77OGRTU iobroker exit 0



2025-06-20 07:23:56.347  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 12252
2025-06-20 07:23:57.789  - info: ankersolix2.0 (12252) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:23:57.798  - error: ankersolix2.0 (12252) User name and/or user password empty - please check instance configuration of ankersolix2.0
2025-06-20 07:24:26.291  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 (force=false, process=true)
2025-06-20 07:24:26.293  - info: host.DESKTOP-77OGRTU stopInstance system.adapter.ankersolix2.0 send kill signal
2025-06-20 07:24:26.286  - info: ankersolix2.0 (12252) Got terminate signal TERMINATE_YOURSELF
2025-06-20 07:24:26.286  - info: ankersolix2.0 (12252) terminating
2025-06-20 07:24:26.287  - info: ankersolix2.0 (12252) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-06-20 07:24:26.796  - info: ankersolix2.0 (12252) terminating
2025-06-20 07:24:26.912  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)


2025-06-20 07:24:30.135  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 10484
2025-06-20 07:24:31.464  - info: ankersolix2.0 (10484) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:24:31.475  - error: ankersolix2.0 (10484) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:24:31.475  - error: ankersolix2.0 (10484) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:24:31.476  - error: ankersolix2.0 (10484) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:24:31.476  - error: ankersolix2.0 (10484) Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:24:31.479  - info: ankersolix2.0 (10484) terminating
2025-06-20 07:24:31.479  - warn: ankersolix2.0 (10484) Terminated (UNCAUGHT_EXCEPTION): Without reason
2025-06-20 07:24:31.994  - info: ankersolix2.0 (10484) terminating
2025-06-20 07:24:32.081  - error: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2025-06-20 07:24:32.081  - info: host.DESKTOP-77OGRTU Restart adapter system.adapter.ankersolix2.0 because enabled
2025-06-20 07:25:03.790  - info: ankersolix2.0 (12060) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:25:03.800  - error: ankersolix2.0 (12060) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:25:03.800  - error: ankersolix2.0 (12060) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:25:03.801  - error: ankersolix2.0 (12060) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:25:03.801  - error: ankersolix2.0 (12060) Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:25:03.804  - info: ankersolix2.0 (12060) terminating
2025-06-20 07:25:03.804  - warn: ankersolix2.0 (12060) Terminated (UNCAUGHT_EXCEPTION): Without reason
2025-06-20 07:25:04.316  - info: ankersolix2.0 (12060) terminating
2025-06-20 07:25:04.421  - error: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2025-06-20 07:25:04.421  - info: host.DESKTOP-77OGRTU Restart adapter system.adapter.ankersolix2.0 because enabled
2025-06-20 07:25:34.764  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 10668
2025-06-20 07:25:36.086  - info: ankersolix2.0 (10668) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:25:36.096  - error: ankersolix2.0 (10668) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:25:36.096  - error: ankersolix2.0 (10668) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:25:36.097  - error: ankersolix2.0 (10668) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:25:36.097  - error: ankersolix2.0 (10668) Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:25:36.099  - info: ankersolix2.0 (10668) terminating
2025-06-20 07:25:36.100  - warn: ankersolix2.0 (10668) Terminated (UNCAUGHT_EXCEPTION): Without reason
2025-06-20 07:25:36.615  - info: ankersolix2.0 (10668) terminating
2025-06-20 07:25:36.720  - error: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2025-06-20 07:25:36.720  - info: host.DESKTOP-77OGRTU Restart adapter system.adapter.ankersolix2.0 because enabled
2025-06-20 07:25:36.720  - warn: host.DESKTOP-77OGRTU Do not restart adapter system.adapter.ankersolix2.0 because restart loop detected
2025-06-20 07:26:00.481  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" disabled
2025-06-20 07:26:11.003  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" enabled
2025-06-20 07:26:11.495  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 11744
2025-06-20 07:26:12.897  - info: ankersolix2.0 (11744) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:26:12.908  - error: ankersolix2.0 (11744) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:26:12.908  - error: ankersolix2.0 (11744) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:26:12.909  - error: ankersolix2.0 (11744) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:26:12.909  - error: ankersolix2.0 (11744) Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:26:12.911  - info: ankersolix2.0 (11744) terminating
2025-06-20 07:26:12.912  - warn: ankersolix2.0 (11744) Terminated (UNCAUGHT_EXCEPTION): Without reason
2025-06-20 07:26:13.419  - info: ankersolix2.0 (11744) terminating
2025-06-20 07:26:13.532  - error: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2025-06-20 07:26:13.532  - info: host.DESKTOP-77OGRTU Restart adapter system.adapter.ankersolix2.0 because enabled
2025-06-20 07:26:43.897  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 2864
2025-06-20 07:26:45.203  - info: ankersolix2.0 (2864) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:26:45.212  - error: ankersolix2.0 (2864) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:26:45.213  - error: ankersolix2.0 (2864) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:26:45.214  - error: ankersolix2.0 (2864) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:26:45.214  - error: ankersolix2.0 (2864) Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:26:45.216  - info: ankersolix2.0 (2864) terminating
2025-06-20 07:26:45.217  - warn: ankersolix2.0 (2864) Terminated (UNCAUGHT_EXCEPTION): Without reason
2025-06-20 07:26:45.724  - info: ankersolix2.0 (2864) terminating
2025-06-20 07:26:45.820  - error: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2025-06-20 07:26:45.820  - info: host.DESKTOP-77OGRTU Restart adapter system.adapter.ankersolix2.0 because enabled
2025-06-20 07:27:16.202  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 12300
2025-06-20 07:27:17.537  - info: ankersolix2.0 (12300) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:27:17.547  - error: ankersolix2.0 (12300) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:27:17.547  - error: ankersolix2.0 (12300) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:27:17.548  - error: ankersolix2.0 (12300) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:27:17.548  - error: ankersolix2.0 (12300) Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:27:17.551  - info: ankersolix2.0 (12300) terminating
2025-06-20 07:27:17.551  - warn: ankersolix2.0 (12300) Terminated (UNCAUGHT_EXCEPTION): Without reason
2025-06-20 07:27:18.060  - info: ankersolix2.0 (12300) terminating
2025-06-20 07:27:18.163  - error: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2025-06-20 07:27:18.163  - info: host.DESKTOP-77OGRTU Restart adapter system.adapter.ankersolix2.0 because enabled
2025-06-20 07:27:18.163  - warn: host.DESKTOP-77OGRTU Do not restart adapter system.adapter.ankersolix2.0 because restart loop detected
2025-06-20 07:27:24.150  - info: host.DESKTOP-77OGRTU "system.adapter.ankersolix2.0" disabled

Vielleicht hilft das dem Problem auf die Spur zu kommen.

[ronny130286]

@uwerlp said in Anker Adapter:

User name and/or user password empty - please check instance configuration of ankersolix2.0

Hast du die Daten im Adapter neu eingegeben?

Weil er sagt: User name and/or user password empty - please check instance configuration of ankersolix2.0

[UweRLP]

@ronny130286 Vermutlich zu viel LOG, entschuldigung
In dem Log sieht man von oben nach unten die Deinstallation, neue Installation und den Aufruf zur Eingabe der Daten.

Die Meldung kam nach der neuen Installation des Adapters, war/ist für mich auch klar weil in dem Moment noch keine Daten eingegeben waren.
Die Daten sind aber eingegeben und gespeichert.

Ab Zeile 73 im letzten Poste https://forum.iobroker.net/post/1278840 , zweites Log.

2025-06-20 07:24:30.135  - info: host.DESKTOP-77OGRTU instance system.adapter.ankersolix2.0 in version "2.1.2" started with pid 10484
2025-06-20 07:24:31.464  - info: ankersolix2.0 (10484) starting. Version 2.1.2 in c:/iobroker/node_modules/iobroker.ankersolix2, node: v22.16.0, js-controller: 7.0.7
2025-06-20 07:24:31.475  - error: ankersolix2.0 (10484) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2025-06-20 07:24:31.475  - error: ankersolix2.0 (10484) unhandled promise rejection: Cannot read properties of undefined (reading 'toUpperCase')
2025-06-20 07:24:31.476  - error: ankersolix2.0 (10484) TypeError: Cannot read properties of undefined (reading 'toUpperCase')
    at new SolixApi (c:\iobroker\node_modules\iobroker.ankersolix2\build\api.js:116:36)
    at Ankersolix2.loginAPI (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:84:16)
    at Ankersolix2.onReady (c:\iobroker\node_modules\iobroker.ankersolix2\build\main.js:75:33)
    at Ankersolix2.emit (node:events:518:28)
    at Ankersolix2._callReadyHandler (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7857:12)
    at Ankersolix2._initAdapter (c:\iobroker\node_modules\@iobroker\js-controller-adapter\build\cjs\lib\adapter\adapter.js:7840:12)
2025-06-20 07:24:31.476  - error: ankersolix2.0 (10484) Cannot read properties of undefined (reading 'toUpperCase')

Bin kein Programmierer deswegen nur leihenhaftes Verständnis.
"This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch()."
Könnte das bedeuten, dass was nicht Syncron läuft bzw. was versucht wird bevor was andere fertig ist?

Deutet 'toUpperCase' nicht auf Groß-/Kleinschreibung hin wobei es zu Problemen kommt?

[ronny130286]

@UweRLP
Das "toUpperCase" wird benötigt um der Ländercode immer groß zu schreiben, jegliche Kleinschreibung wird zur Großschreibung bspw. de => DE, en => EN und so weiter
Deshalb wundert es mich, dass er damit nicht umgehen kann, weil das schon immer vorhanden war.

Der einzige Unterschied momentan wäre, du nutzt Nodejs 22 und ich 20.

Hast du mit anderen Adaptern auch Probleme?

[Thomas Braun]

@ronny130286 sagte in Anker Adapter:

Der einzige Unterschied momentan wäre, du nutzt Nodejs 22 und ich 20.

Hier läuft der Adapter mit nodejs 20, 22 und 24.

[Homoran]

@ronny130286 sagte in Anker Adapter:

Der einzige Unterschied momentan wäre, du nutzt

...windows

[ronny130286]

@homoran

stimmt, dann war es nicht der einzige Unterschied.

[Volker3.0]

@ronny130286
Danke für die Antwort!
Bis wann denkst du, kannst du dir die API mal anschauen? Ich mache den Kauf des Anker von deinem Adapter abhängig, da ich die Steuerung über den ioBroker benötige 🫣

Gruß Volker