Test Adapter iobroker.Zigbee 1.10.10
-
mal eine Steckdose eingeschaltet:
zigbee.0 2024-10-20 11:28:58.451 debug target: {"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":81,"inputClusters":[0,4,5,6,1794,2820],"outputClusters":[25,10],"profileID":260,"ID":1,"clusters":{"genOnOff":{"attributes":{"onOff":1,"onTime":0,"offWaitTime":0,"tuyaBacklightMode":1,"moesStartUpOnOff":1}},"genBasic":{"attributes":{"modelId":"TS0121","manufacturerName":"_TZ3000_g5xawfcq","stackVersion":0,"dateCode":""}},"seMetering":{"attributes":{"currentSummDelivered":[0,11339],"divisor":100,"multiplier":1}},"haElectricalMeasurement":{"attributes":{"acVoltageMultiplier":1,"acVoltageDivisor":1,"acCurrentMultiplier":1,"acCurrentDivisor":1000,"acPowerMultiplier":1,"acPowerDivisor":1,"rmsVoltage":225,"rmsCurrent":0,"activePower":0}}},"deviceIeeeAddress":"0x60a423fffe651f06","deviceNetworkAddress":27808,"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1},{"cluster":2820,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1},{"cluster":1794,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1}],"_configuredReportings":[{"cluster":1794,"attrId":0,"minRepIntval":5,"maxRepIntval":3600,"repChange":[1,1],"manufacturerCode":null},{"cluster":2820,"attrId":1285,"minRepIntval":5,"maxRepIntval":3600,"repChange":5,"manufacturerCode":null},{"cluster":2820,"attrId":1288,"minRepIntval":5,"maxRepIntval":3600,"repChange":50,"manufacturerCode":null},{"cluster":2820,"attrId":1291,"minRepIntval":5,"maxRepIntval":3600,"repChange":10,"manufacturerCode":null}],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":1,"deviceIeeeAddress":"0x60a423fffe651f06"}} zigbee.0 2024-10-20 11:28:58.451 debug convert state, "ON", {} zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["zclcommand"] zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["reset"] zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["command"] zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["write"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["read"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_rename"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_remove_all"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_remove"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_add"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_recall"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_store"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["backlight_mode","indicator_mode"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["power_on_behavior","power_outage_memory"] zigbee.0 2024-10-20 11:28:58.450 debug Setting' converter to converter with key(s)'["state","on_time","off_wait_time"]} zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["state","on_time","off_wait_time"] zigbee.0 2024-10-20 11:28:58.449 debug entity: 0x60a423fffe651f06 TS0121_plug {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":147,"_applicationVersion":65,"_dateCode":"","_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":81,"inputClusters":[0,4,5,6,1794,2820],"outputClusters":[25,10],"profileID":260,"ID":1,"clusters":{"genOnOff":{"attributes":{"onOff":1,"onTime":0,"offWaitTime":0,"tuyaBacklightMode":1,"moesStartUpOnOff":1}},"genBasic":{"attributes":{"modelId":"TS0121","manufacturerName":"_TZ3000_g5xawfcq","stackVersion":0,"dateCode":""}},"seMetering":{"attributes":{"currentSummDelivered":[0,11339],"divisor":100,"multiplier":1}},"haElectricalMeasurement":{"attributes":{"acVoltageMultiplier":1,"acVoltageDivisor":1,"acCurrentMultiplier":1,"acCurrentDivisor":1000,"acPowerMultiplier":1,"acPowerDivisor":1,"rmsVoltage":225,"rmsCurrent":0,"activePower":0}}},"deviceIeeeAddress":"0x60a423fffe651f06","deviceNetworkAddress":27808,"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1},{"cluster":2820,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1},{"cluster":1794,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1}],"_configuredReportings":[{"cluster":1794,"attrId":0,"minRepIntval":5,"maxRepIntval":3600,"repChange":[1,1],"manufacturerCode":null},{"cluster":2820,"attrId":1285,"minRepIntval":5,"maxRepIntval":3600,"repChange":5,"manufacturerCode":null},{"cluster":2820,"attrId":1288,"minRepIntval":5,"maxRepIntval":3600,"repChange":50,"manufacturerCode":null},{"cluster":2820,"attrId":1291,"minRepIntval":5,"maxRepIntval":3600,"repChange":10,"manufacturerCode":null}],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":1,"deviceIeeeAddress":"0x60a423fffe651f06"}}],"_hardwareVersion":1,"_ieeeAddr":"0x60a423fffe651f06","_interviewCompleted":true,"_interviewing":false,"_lastSeen":1728793934222,"_manufacturerID":4098,"_manufacturerName":"_TZ3000_g5xawfcq","_modelID":"TS0121","_networkAddress":27808,"_powerSource":"Mains (single phase)","_stackVersion":0,"_type":"Router","_zclVersion":3,"_skipDefaultResponse":false,"_pendingRequestTimeout":0,"_customClusters":{},"meta":{"configured":356340264}},"mapped":{"zigbeeModel":["TS0121"],"model":"TS0121_plug","description":"10A UK or 16A EU smart plug","whiteLabel":[{"vendor":"BlitzWolf","model":"BW-SHP13"},{"vendor":"Connecte","model":"4500990"},{"vendor":"Connecte","model":"4500991"},{"vendor":"Connecte","model":"4500992"},{"vendor":"Connecte","model":"4500993"}],"vendor":"Tuya","fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"],"options":[{"name":"state_action","label":"State action","access":2,"type":"binary","property":"state_action","description":"State actions will also be published as 'action' when true (default false).","value_on":true,"value_off":false}]},{"cluster":"haElectricalMeasurement","type":["attributeReport","readResponse"]},{"cluster":"seMetering","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"genOnOff","type":["attributeReport","readResponse"]},{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["power_on_behavior","power_outage_memory"]},{"key":["backlight_mode","indicator_mode"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["scene_rename"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]},{"key":["zclcommand"]}],"options":[{"name":"measurement_poll_interval","label":"Measurement poll interval","access":2,"type":"numeric","property":"measurement_poll_interval","description":"This device does not support reporting electric measurements so it is polled instead. The default poll interval is 60 seconds, set to -1 to disable.","value_min":-1},{"name":"power_calibration","label":"Power calibration","access":2,"type":"numeric","property":"power_calibration","description":"Calibrates the power value (percentual offset), takes into effect on next report of device."},{"name":"power_precision","label":"Power precision","access":2,"type":"numeric","property":"power_precision","description":"Number of digits after decimal point for power, takes into effect on next report of device. This option can only decrease the precision, not increase it.","value_max":3,"value_min":0},{"name":"current_calibration","label":"Current calibration","access":2,"type":"numeric","property":"current_calibration","description":"Calibrates the current value (percentual offset), takes into effect on next report of device."},{"name":"current_precision","label":"Current precision","access":2,"type":"numeric","property":"current_precision","description":"Number of digits after decimal point for current, takes into effect on next report of device. This option can only decrease the precision, not increase it.","value_max":3,"value_min":0},{"name":"voltage_calibration","label":"Voltage calibration","access":2,"type":"numeric","property":"voltage_calibration","description":"Calibrates the voltage value (percentual offset), takes into effect on next report of device."},{"name":"voltage_precision","label":"Voltage precision","access":2,"type":"numeric","property":"voltage_precision","description":"Number of digits after decimal point for voltage, takes into effect on next report of device. This option can only decrease the precision, not increase it.","value_max":3,"value_min":0},{"name":"energy_calibration","label":"Energy calibration","access":2,"type":"numeric","property":"energy_calibration","description":"Calibrates the energy value (percentual offset), takes into effect on next report of device."},{"name":"energy_precision","label":"Energy precision","access":2,"type":"numeric","property":"energy_precision","description":"Number of digits after decimal point for energy, takes into effect on next report of device. This option can only decrease the precision, not increase it.","value_max":3,"value_min":0},"[Circular]"],"exposes":[{"type":"switch","features":[{"name":"state","label":"State","access":7,"type":"binary","property":"state","description":"On/off state of the switch","value_on":"ON","value_off":"OFF","value_toggle":"TOGGLE"}]},{"name":"power","label":"Power","access":1,"type":"numeric","property":"power","description":"Instantaneous measured power","category":"diagnostic","unit":"W"},{"name":"current","label":"Current","access":1,"type":"numeric","property":"current","description":"Instantaneous measured electrical current","category":"diagnostic","unit":"A"},{"name":"voltage","label":"Voltage","access":1,"type":"numeric","property":"voltage","description":"Measured electrical potential value","category":"diagnostic","unit":"V"},{"name":"energy","label":"Energy","access":1,"type":"numeric","property":"energy","description":"Sum of consumed energy","unit":"kWh"},{"name":"power_outage_memory","label":"Power outage memory","access":7,"type":"enum","property":"power_outage_memory","description":"Recover state after power outage","values":["on","off","restore"]},{"name":"indicator_mode","label":"Indicator mode","access":7,"type":"enum","property":"indicator_mode","description":"LED indicator mode","values":["off","off/on","on/off"]},{"name":"linkquality","label":"Linkquality","access":1,"type":"numeric","property":"linkquality","description":"Link quality (signal strength)","category":"diagnostic","unit":"lqi","value_max":255,"value_min":0}]},"endpoint":"[Circular]","endpoints":"[Circular]","name":"0x60a423fffe651f06"} zigbee.0 2024-10-20 11:28:58.448 debug publishFromState : 0x60a423fffe651f06 TS0121_plug [{"stateDesc":{"id":"state","prop":"state","name":"On/off state of the switch","role":"switch","write":true,"read":true,"type":"boolean","setattr":"state","readable":true,"writable":true},"value":true,"index":0,"timeout":0}] zigbee.0 2024-10-20 11:28:58.445 debug Change state 'state' at device 0x60a423fffe651f06 type 'TS0121_plug' zigbee.0 2024-10-20 11:28:58.440 debug User stateChange zigbee.0.60a423fffe651f06.state {"val":true,"ack":false,"ts":1729416538438,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1729416538438}Edit:
dann kam das:zigbee.0 2024-10-20 11:29:25.384 debug DeviceAvailability:Non-pingable device 0x00158d00011083e8 lumi.sensor_cube was last seen '624802.431' seconds ago. zigbee.0 2024-10-20 11:28:58.451 debug target: {"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":81,"inputClusters":[0,4,5,6,1794,2820],"outputClusters":[25,10],"profileID":260,"ID":1,"clusters":{"genOnOff":{"attributes":{"onOff":1,"onTime":0,"offWaitTime":0,"tuyaBacklightMode":1,"moesStartUpOnOff":1}},"genBasic":{"attributes":{"modelId":"TS0121","manufacturerName":"_TZ3000_g5xawfcq","stackVersion":0,"dateCode":""}},"seMetering":{"attributes":{"currentSummDelivered":[0,11339],"divisor":100,"multiplier":1}},"haElectricalMeasurement":{"attributes":{"acVoltageMultiplier":1,"acVoltageDivisor":1,"acCurrentMultiplier":1,"acCurrentDivisor":1000,"acPowerMultiplier":1,"acPowerDivisor":1,"rmsVoltage":225,"rmsCurrent":0,"activePower":0}}},"deviceIeeeAddress":"0x60a423fffe651f06","deviceNetworkAddress":27808,"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1},{"cluster":2820,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1},{"cluster":1794,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fc127","endpointID":1}],"_configuredReportings":[{"cluster":1794,"attrId":0,"minRepIntval":5,"maxRepIntval":3600,"repChange":[1,1],"manufacturerCode":null},{"cluster":2820,"attrId":1285,"minRepIntval":5,"maxRepIntval":3600,"repChange":5,"manufacturerCode":null},{"cluster":2820,"attrId":1288,"minRepIntval":5,"maxRepIntval":3600,"repChange":50,"manufacturerCode":null},{"cluster":2820,"attrId":1291,"minRepIntval":5,"maxRepIntval":3600,"repChange":10,"manufacturerCode":null}],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":1,"deviceIeeeAddress":"0x60a423fffe651f06"}} zigbee.0 2024-10-20 11:28:58.451 debug convert state, "ON", {} zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["zclcommand"] zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["reset"] zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["command"] zigbee.0 2024-10-20 11:28:58.451 debug Type of toZigbee is 'object', Contains key ["write"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["read"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_rename"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_remove_all"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_remove"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_add"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_recall"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["scene_store"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["backlight_mode","indicator_mode"] zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["power_on_behavior","power_outage_memory"] zigbee.0 2024-10-20 11:28:58.450 debug Setting' converter to converter with key(s)'["state","on_time","off_wait_time"]} zigbee.0 2024-10-20 11:28:58.450 debug Type of toZigbee is 'object', Contains key ["state","on_time","off_wait_time"] -
@ilovegym sagte in Test Adapter iobroker.Zigbee 1.10.10:
mal eine Steckdose eingeschaltet:
Das hilft leider so gar nicht.
- Es ist nicht die von mir oben gewünschte Version mit den Zusatzausgaben
- der Adapter läuft im Debug - sprich es werden viel zu viele Meldungen gespeichert.
Bitte mach das was ich hier beschrieben habe.
A.
-
Bitteschoen:
Edit: nochmal die Version geprueft, habe ich von Github von deinem Repo geladen, wie du geschrieben hast.
Edit2: wie schon geschrieben, der Adapter kommuniziert NICHT mit dem Stick, er meckert jetzt zwar nicht mehr, dass er ihn nicht finden kann, aber es werden keine Daten transportiert.zigbee.0 2024-10-20 14:42:06.875 warn ELEVATED publishToState: value generated '0' from device 00158d000200cfd1 for 'Link quality' zigbee.0 2024-10-20 14:42:06.875 warn ELEVATED publishToState: message received '{"linkquality":0}' from device 00158d000200cfd1 type 'RTCGQ11LM' zigbee.0 2024-10-20 14:42:06.874 warn ELEVATED publishToState: value generated 'false' from device 00158d000200cfd1 for 'Available' zigbee.0 2024-10-20 14:42:06.874 warn ELEVATED publishToState: message received '{"available":false}' from device 00158d000200cfd1 type 'RTCGQ11LM' zigbee.0 2024-10-20 14:41:17.915 warn DeviceConfigure: 0xa4c138907173660d SNZB-04 Failed to configure. When device works is all fine when not wake up the device and check again -
@ilovegym sagte in Test Adapter iobroker.Zigbee 1.10.10:
Bitteschoen:
Edit: nochmal die Version geprueft, habe ich von Github von deinem Repo geladen, wie du geschrieben hast.
Edit2: wie schon geschrieben, der Adapter kommuniziert NICHT mit dem Stick, er meckert jetzt zwar nicht mehr, dass er ihn nicht finden kann, aber es werden keine Daten transportiert.Danke. Das entscheidende fehlt aber immer noch. Ich habe keinerlei Logeinträge von einem Versuch den RTCQ11LM von ioBroker aus über die Objekte zu schalten. Dabei geht es gar nicht darum das nichts vom Stick kommt - es kommen Überhaut keine Informationen, als ob der Adapter der Meinung ist keine Geräte zu haben, bzw. überhaupt keine Nachricht von den Objekten bekommt das ein Objekt geändert wurde.
Gemeint sind Meldungen wie diese (kopiert aus deinem Log oben):
2024-10-20 11:28:58.445 debug Change state 'state' at device 0x60a423fffe651f06 type 'TS0121_plug'die müssten als elevated kommen, wenn die IEEE von der Steckdose bei den Debug-Messages eingetragen ist. Du musst für einen sauberen Test schon ein Gerät überwachen welches du vom Adapter auch steuern kannst. Ein Sensor ist da ungeeignet - ich hatte gezielt um eine Leuchte gebeten, da diese mindestens 2, oft noch mehr ansteuerbare Datenpunkte hat.
Bitte zusätzlich auch noch mal das Log vom Startup des Adapters posten.
A.
Nachtrag: Der Stick kommuniziert nebenbei doch mit dem Adapter - die Meldungmessage received '{"linkquality":0}' from device 00158d000200cfd1 type 'RTCGQ11LM'kommt wenn der Adapter vom Zigbee-Herdsman das entsprechende Telegramm erhält - in diesem Fall die LQ von 0. -
so, ich war jetzt etwas im Zugzwang, da hier irgendwie nix mehr mit Zigbee ging, also habe ich mal flux ein LXC neu aufgesetzt, iobroker installiert und das Backup von gestern mittag eingespielt, da war noch die Version 1.10.9 drauf. ( bin also jetzt vom Docker V10 mit js-controller 7 Node 20 auf Bookworm lxc js-controller 7 Node 20 umgezogen).
Siehe da, er zeigt mir Zigbee Adapter 1.10.10 an (anscheinend gibts die 1.10.9 nicht mehr und er hat aus dem latest die .10 gezogen) und die Version geht!!Sind noch 32 Zigbee devices offline (von 247 ) aber das sind ein paar Fernbedienungen und Bewegungsmelder.. ich lauf mal rum..
Glaub mir, ich hab heute morgen die Version von dir gezogen, dann sogar auch mal den Koordinator vom strom und Netzwerk genommen, ihn gegen das Ersatzdevice getauscht( hab genau zwei gleiche, die kann ich tauschen wie ich will, schon mehrmals getestet).. es war immer der selbe effekt.
Am schluss habe ich gesehen, dass die Zigbee-Instanz wohl noch lief ( mit top in der console aufm docker), obwohl sie im Admin als beendet gekennzeichnet war. Im log erschien auch nix.
Vielleicht hatte sich durch updates / starten / fehler / stoppen / was verhaspelt.. aber den Docker Container hatte ich auch mehrmals neu gestartet..Den Docker Container hab ich noch.. wenn ich da noch was testen soll... wobei ich dann das Produktivsystem stoppen muesste... Bei sowas ist es immer doof, da man es kaum mit einem zweiten System testen kann.. hab zwar so 20-30 Sensoren noch in der Schublade, falls mal einer Ausfaellt, aber ein zweites Zigbee stoert .. ist schon genug, dass OpenEpaperlink mitfunkt.. (der eine AP auf 11, der andere im Keller auf 15, iobroker im ganzen Haus auf 25 )...
-
@asgothian sagte in Test Adapter iobroker.Zigbee 1.10.10:
die müssten als elevated kommen, wenn die IEEE von der Steckdose bei den Debug-Messages eingetragen ist. Du musst für einen sauberen Test schon ein Gerät überwachen welches du vom Adapter auch steuern kannst. Ein Sensor ist da ungeeignet - ich hatte gezielt um eine Leuchte gebeten, da diese mindestens 2, oft noch mehr ansteuerbare Datenpunkte hat.
hatte ich zwischenzeitlich auch probiert, aber es liess sich vom Adapter nichts steuern..
Bitte zusätzlich auch noch mal das Log vom Startup des Adapters posten.
Brauchst du noch was jetzt, wo es hier geht?
Und danke fuer die Hilfe.. -
@ilovegym sagte in Test Adapter iobroker.Zigbee 1.10.10:
Brauchst du noch was jetzt, wo es hier geht?
Und danke fuer die Hilfe..Nein. Danke fürs testen und die Hilfe. Die 1.10.9 gibt es allerdings so nicht mehr - sie wurde nie vollständig fertig getestet. Die letzte "stable" ist 1.10.3
Das Thema mit der laufend bleibenden Zigbee-Instanz kenne ich - kann es aber leider nicht sicher nachstellen, so das ich bei grösseren Tests immer den Adapter von Hand beende und sicherstelle das der auch wirklich weg ist. Problematisch ist das eher bei den Netz-Koordinatoren, da die die 2. Verbindung halt nicht immer zu 100% verweigern.
A.
-
@ritter Kannst Du bitte nochmal die letzte Version von
https://github.com/asgothian/ioBroker.zigbeeinstallieren - da habe ich die Log Meldungen noch einmal deutlich erweitert damit wir sehen können wo das Steuern der Geräte schief geht ?
A.
-
ah, danke dir! ok
-
@asgothian Klaro
zigbee.0 2024-10-20 17:45:17.988 warn ELEVATED: convert color_temp, 208, {"brightness":100,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:45:17.975 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:45:17.928 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":208,"ack":false,"ts":1729439117925,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439117925} zigbee.0 2024-10-20 17:45:14.831 warn ELEVATED: convert effect, "stop_effect", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:45:14.819 warn ELEVATED Change state 'effect' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:45:14.763 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.effect {"val":"stop_effect","ack":false,"ts":1729439114754,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439114754} zigbee.0 2024-10-20 17:45:12.009 warn ELEVATED: convert effect, "breathe", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:45:11.995 warn ELEVATED Change state 'effect' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:45:11.942 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.effect {"val":"breathe","ack":false,"ts":1729439111934,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439111934} zigbee.0 2024-10-20 17:45:06.607 warn ELEVATED: convert effect, "blink", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:45:06.602 warn ELEVATED Change state 'effect' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:45:06.555 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.effect {"val":"blink","ack":false,"ts":1729439106552,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439106552} zigbee.0 2024-10-20 17:45:01.843 warn ELEVATED: convert state, "OFF", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:45:01.839 warn ELEVATED Change state 'state' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:45:01.790 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.state {"val":false,"ack":false,"ts":1729439101787,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439101787} zigbee.0 2024-10-20 17:44:57.651 warn ELEVATED: convert state, "ON", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:44:57.639 warn ELEVATED Change state 'state' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:57.582 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.state {"val":true,"ack":false,"ts":1729439097573,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439097573} zigbee.0 2024-10-20 17:44:54.565 warn ELEVATED: convert color_temp, 435, {"brightness":100,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:44:54.551 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:54.504 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":435,"ack":false,"ts":1729439094498,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439094498} zigbee.0 2024-10-20 17:44:50.602 warn ELEVATED: convert color_temp, 150, {"brightness":100,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:44:50.598 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:50.553 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":150,"ack":false,"ts":1729439090550,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439090550} zigbee.0 2024-10-20 17:44:46.041 warn ELEVATED: convert brightness, 254, {"brightness":254,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:44:46.027 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:45.981 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":100,"ack":false,"ts":1729439085978,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439085978} zigbee.0 2024-10-20 17:44:43.873 warn ELEVATED: convert brightness, 0, {"brightness":0,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:44:43.859 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:43.813 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":0,"ack":false,"ts":1729439083808,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729439083808} zigbee.0 2024-10-20 17:44:35.568 warn ELEVATED publishToState: value generated '69' from device 943469fffe55fc9e for 'Link quality' zigbee.0 2024-10-20 17:44:35.568 warn ELEVATED publishToState: message received '{"linkquality":69}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:35.563 warn ELEVATED: Zigbee Event of Type commandQueryNextImageRequest from device "0x943469fffe55fc9e", incoming event: {"type":"commandQueryNextImageRequest","device":"0x943469fffe55fc9e","endpoint":1,"data":{"fieldControl":1,"manufacturerCode":4476,"imageType":8709,"fileVersion":65554},"linkquality":69,"groupID":0,"cluster":"genOta"} zigbee.0 2024-10-20 17:44:32.575 warn ELEVATED publishToState: value generated '69' from device 943469fffe55fc9e for 'Link quality' zigbee.0 2024-10-20 17:44:32.575 warn ELEVATED publishToState: message received '{"linkquality":69}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:32.566 warn ELEVATED: Zigbee Event of Type commandQueryNextImageRequest from device "0x943469fffe55fc9e", incoming event: {"type":"commandQueryNextImageRequest","device":"0x943469fffe55fc9e","endpoint":1,"data":{"fieldControl":1,"manufacturerCode":4476,"imageType":8709,"fileVersion":65554},"linkquality":69,"groupID":0,"cluster":"genOta"} zigbee.0 2024-10-20 17:44:29.639 warn ELEVATED publishToState: value generated '65' from device 943469fffe55fc9e for 'Link quality' zigbee.0 2024-10-20 17:44:29.639 warn ELEVATED publishToState: message received '{"linkquality":65}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:29.619 warn ELEVATED: Zigbee Event of Type commandQueryNextImageRequest from device "0x943469fffe55fc9e", incoming event: {"type":"commandQueryNextImageRequest","device":"0x943469fffe55fc9e","endpoint":1,"data":{"fieldControl":1,"manufacturerCode":4476,"imageType":8709,"fileVersion":65554},"linkquality":65,"groupID":0,"cluster":"genOta"} zigbee.0 2024-10-20 17:44:26.576 warn ELEVATED publishToState: value generated '69' from device 943469fffe55fc9e for 'Link quality' zigbee.0 2024-10-20 17:44:26.576 warn ELEVATED publishToState: message received '{"linkquality":69}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:26.572 warn ELEVATED: Zigbee Event of Type commandQueryNextImageRequest from device "0x943469fffe55fc9e", incoming event: {"type":"commandQueryNextImageRequest","device":"0x943469fffe55fc9e","endpoint":1,"data":{"fieldControl":1,"manufacturerCode":4476,"imageType":8709,"fileVersion":65554},"linkquality":69,"groupID":0,"cluster":"genOta"} zigbee.0 2024-10-20 17:44:23.593 warn ELEVATED publishToState: value generated '69' from device 943469fffe55fc9e for 'Link quality' zigbee.0 2024-10-20 17:44:23.593 warn ELEVATED publishToState: message received '{"linkquality":69}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:44:23.574 warn ELEVATED: Zigbee Event of Type commandQueryNextImageRequest from device "0x943469fffe55fc9e", incoming event: {"type":"commandQueryNextImageRequest","device":"0x943469fffe55fc9e","endpoint":1,"data":{"fieldControl":1,"manufacturerCode":4476,"imageType":8709,"fileVersion":65554},"linkquality":69,"groupID":0,"cluster":"genOta"} zigbee.0 2024-10-20 17:43:03.159 warn ELEVATED publishToState: value generated '10' from device 943469fffe55fc9e for 'Link quality' zigbee.0 2024-10-20 17:43:03.159 warn ELEVATED publishToState: message received '{"linkquality":10}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:43:03.159 warn ELEVATED publishToState: value generated 'true' from device 943469fffe55fc9e for 'Available' zigbee.0 2024-10-20 17:43:03.158 warn ELEVATED publishToState: message received '{"available":true}' from device 943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:43:02.167 info Device '0x385b44fffe9a79c2' announced itself zigbee.0 2024-10-20 17:43:02.162 info Device '0x187a3efffe6ddf74' announced itself zigbee.0 2024-10-20 17:43:02.142 info Device '0x943469fffe55fc9e' announced itself zigbee.0 2024-10-20 17:41:49.775 warn ELEVATED: convert color_temp, 319, {"brightness":56,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:41:49.770 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:41:49.711 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":319,"ack":false,"ts":1729438909701,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729438909701} zigbee.0 2024-10-20 17:41:48.430 warn ELEVATED: convert brightness, 142, {"brightness":142,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:41:48.426 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:41:48.377 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":56,"ack":false,"ts":1729438908373,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729438908373} zigbee.0 2024-10-20 17:41:47.780 warn ELEVATED: convert brightness, 55, {"brightness":55,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:41:47.774 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 17:41:47.678 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":22,"ack":false,"ts":1729438907668,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729438907668} zigbee.0 2024-10-20 17:41:29.185 info List of port: [{"path":"/dev/ttyS0","vendorId":"8086","productId":"9d27"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS3"}] zigbee.0 2024-10-20 17:41:16.886 warn DeviceAvailability:Failed to ping 0x00124b000fea77a5 lumi.router -
@ritter gibt es irgend welche Fehlermeldungen innerhalb von 60 Sekunden ab dem Versuch etwas zu schalten ?
-
@asgothian Nein, keine Fehlermeldung.
Nachtrag: Von einem Aquara Temperatursensor empfängt man auch die Daten. -
@ritter Kannst du nochmal von meinem Test-Branch installieren. Auffällig ist das bei deinem Log eine Nachricht fehlt:
Dein Log
zigbee.0 2024-10-20 17:45:14.831 warn ELEVATED: convert effect, "stop_effect", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 17:45:14.819 warn ELEVATED Change state 'effect' at device 0x943469fffe55fc9e type 'LED2003G10'Mein Log
zigbee.0 2024-10-20 20:01:49.612 warn ELEVATED: convert result {"state":{"state":"ON"},"readAfterWriteTime":0} for device 0x0017880109bab68f zigbee.0 2024-10-20 20:01:49.578 warn ELEVATED: convert state, "ON", {} for device 0x0017880109bab68f zigbee.0 2024-10-20 20:01:49.553 warn ELEVATED Change state 'state' at device 0x0017880109bab68f type '8718699703424'Ich hab da nochmal ein paar Nachrichten eingebaut um zu sehen was passiert. Das die
convert resultNachricht fehlt deutet darauf hin das der Adapter nie einen Wert an den Koordinator schickt.A.
-
zigbee.0 2024-10-20 20:17:43.403 warn ELEVATED: convert color_temp, 500, {"brightness":6,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:43.398 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:43.344 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":500,"ack":false,"ts":1729448263335,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448263335} zigbee.0 2024-10-20 20:17:38.852 warn ELEVATED: convert brightness, 15, {"brightness":15,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:38.850 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:38.802 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":6,"ack":false,"ts":1729448258799,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448258799} zigbee.0 2024-10-20 20:17:36.405 warn ELEVATED: convert state, "OFF", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:36.398 warn ELEVATED Change state 'state' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:36.347 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.state {"val":false,"ack":false,"ts":1729448256341,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448256341} zigbee.0 2024-10-20 20:17:32.926 warn ELEVATED: convert state, "ON", {} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:32.922 warn ELEVATED Change state 'state' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:32.861 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.state {"val":true,"ack":false,"ts":1729448252852,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448252852} zigbee.0 2024-10-20 20:17:32.122 warn ELEVATED: convert color_temp, 195, {"brightness":93,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:32.114 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:32.066 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":195,"ack":false,"ts":1729448252064,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448252064} zigbee.0 2024-10-20 20:17:08.384 warn ELEVATED: convert color_temp, 396, {"brightness":93,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:08.380 warn ELEVATED Change state 'colortemp' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:08.324 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.colortemp {"val":396,"ack":false,"ts":1729448228320,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448228320} zigbee.0 2024-10-20 20:17:07.706 warn ELEVATED: convert brightness, 236, {"brightness":236,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:07.698 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:07.647 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":93,"ack":false,"ts":1729448227639,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448227639} zigbee.0 2024-10-20 20:17:07.480 warn ELEVATED: convert brightness, 221, {"brightness":221,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:07.467 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:07.411 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":87,"ack":false,"ts":1729448227403,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448227403} zigbee.0 2024-10-20 20:17:07.184 warn ELEVATED: convert brightness, 165, {"brightness":165,"transition":0} for device 0x943469fffe55fc9e zigbee.0 2024-10-20 20:17:07.182 warn ELEVATED Change state 'brightness' at device 0x943469fffe55fc9e type 'LED2003G10' zigbee.0 2024-10-20 20:17:07.134 warn ELEVATED: User stateChange zigbee.0.943469fffe55fc9e.brightness {"val":65,"ack":false,"ts":1729448227131,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1729448227131} -
@ritter das ist nach dem Update auf die 1.10.10 von meinem Github ? Da fehlt auch einiges
-
@asgothian Ja, von deinem Git neu installiert.
Könnte es an der neuen Firmware vom Koordinator liegen, hier scheint es Probleme zu geben.
https://github.com/Koenkk/Z-Stack-firmware/issues/518 -
@ritter kann es, aber das die convert result nachricht fehlt irritiert gewaltig.
-
@ritter Kannst du nochmal neu von meinem Github installieren ? Ich hab nochmal was angepasst.
A.
-
@asgothian Hab ich gemacht, hier kommen aber gar keine Log Meldungen mehr wenn man etwas schaltet.
-
@ritter bist du sicher das du zum Testen wieder das Gerät benutzt hast welches unter debugmessages eingetragen ist ? Wenn ich das bei mir laufen lasse kommen die Meldungen.
A
