- ioBroker Community Home
- Deutsch
- ioBroker Allgemein
- js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr
NEWS
js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr
Geplant
Angeheftet
Gesperrt
Verschoben
ioBroker Allgemein
29
Beiträge
8
Kommentatoren
3.0k
Aufrufe
5
Watching
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
-
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
werde mich darum kümmern
Mach es jetzt und dann setzt du deine Fehlersuche auf aktueller Basis fort.
Viele Dinge erledigen sich von alleine, wenn die Kiste nur mal gepflegt wird...
Jaja, ich weiß... Never tatsch...ich traue mich es garnicht zu sagen. Alles geupdatet und die Mühle läuft wieder.
Vielen Dank an alle, die geholfen haben.Beim nächsten Mal update ich zuerst mal alles was geht und komme erst dann hier her.
-
Soviel zu dem Thema 'Never tatsch...'
Hast du einem Monitor an der Kiste hängen?Die Langfassung von
iob diagschaut nun wie aus?
-
Soviel zu dem Thema 'Never tatsch...'
Hast du einem Monitor an der Kiste hängen?Die Langfassung von
iob diagschaut nun wie aus?
@thomas-braun
Habe alles über putty gemacht. Kann aber morgen mal nen Monitor dran hängen. Dann stell ich die Ausgabe von iob diag hier noch ein. -
@thomas-braun
Habe alles über putty gemacht. Kann aber morgen mal nen Monitor dran hängen. Dann stell ich die Ausgabe von iob diag hier noch ein.Ich frage deswegen: Wenn da kein Monitor dran hängt, warum fährst du da eine komplette graphische Oberfläche vollkommen unnötig durch die Gegend?
Schalt das aus:sudo systemctl set-default multi-user.target iob stop sudo rebootDie Ausgaben von
iob diagholst du natürlich aus deinem Terminal 'puTTY'. -
Ich frage deswegen: Wenn da kein Monitor dran hängt, warum fährst du da eine komplette graphische Oberfläche vollkommen unnötig durch die Gegend?
Schalt das aus:sudo systemctl set-default multi-user.target iob stop sudo rebootDie Ausgaben von
iob diagholst du natürlich aus deinem Terminal 'puTTY'.@thomas-braun
Das ist noch ein Überbleibsel aus meinen Anfangstagen mit dem System. Als einer der aus der Windows - Welt kommt, hatte ich mich mit ner GUI einfach wohler gefühlt 😅 -
@Thomas-Braun
hier noch die Ausgabe ausm iob diagSkript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 21:49:01 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Fri 2024-08-23 21:49:01 CEST Universal time: Fri 2024-08-23 19:49:01 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': remotepi HOME=/home/remotepi GROUPS=remotepi sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.4G 372M 12M 1.0G 1.3G Swap: 99M 0B 99M Total: 3.9G 2.4G 472M Active iob-Instances: 50 3794 M total memory 2380 M used memory 2730 M active memory 433 M inactive memory 372 M free memory 61 M buffer memory 980 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:49:02 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 Tasks: 244 total, 1 running, 243 sleeping, 0 stopped, 0 zombie %Cpu(s): 13.5 us, 5.4 sy, 0.0 ni, 81.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 371.8 free, 2380.5 used, 1042.0 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1330.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 58G 34G 22G 61% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.3M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 380M 20K 380M 1% /run/user/1000 tmpfs tmpfs 380M 16K 380M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Fri Aug 23 21:27:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:BD:B5:13 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=353857f1-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): recovery complete [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Aug 23 21:27:33 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Aug 23 21:27:35 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 | | `-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1002 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1002,gid=1002 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 11G /var/ 5.9G /var/log 3.0G /var/cache/apt 3.0G /var/cache 2.9G /var/cache/apt/archives Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 9.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.9G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 628M /opt/iobroker/iobroker-data/history 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 37M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.1e6546bb.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_6ab0a1092a13ec11985b21c7bd930c07-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.23 javascript: 8.7.6 nodejs modules from github: 7 +-- iobroker.alexa2@3.26.5 (git+ssh://git@github.com/Apollon77/ioBroker.alexa2.git#37160cf729a9c70ca70679d4b1d3c16ba51c6456) +-- iobroker.energiefluss@3.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#6f3845de92a5dd659b6cdbc6f097a6199898f0b3) +-- iobroker.fb-checkpresence@1.2.4 (git+ssh://git@github.com/afuerhoff/ioBroker.fb-checkpresence.git#4cf620ccd906543ab5b46de4717eeea5202f0420) +-- iobroker.google-sharedlocations@2.2.1 (git+ssh://git@github.com/Garfonso/ioBroker.google-sharedlocations.git#0db73d57d00aa5dff22ff22e853f1231ce141dc1) +-- iobroker.hmip@1.24.1 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.hmip.git#dc9bd8fb3385684d3650af51a68ba15bf582ca82) +-- iobroker.onvif@1.1.4 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.onvif.git#92a3762c9b8aa813d9a5146fe33dc780613d705e) +-- iobroker.tapo@0.3.3 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#a0e9a3b930c67eceaee5f97d2a48094434838d36) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.backitup.1 : backitup : stromzaehler - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.daswetter.1 : daswetter : raspberrypi - enabled + system.adapter.device-reminder.0 : device-reminder : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - disabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.google-sharedlocations.0 : google-sharedlocations: raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue-extended.0 : hue-extended : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.logparser.0 : logparser : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.opendtu.0 : opendtu : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.roborock.0 : roborock : raspberrypi - enabled system.adapter.scenes.0 : scenes : raspberrypi - disabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : stromzaehler - enabled + system.adapter.smartmeter.1 : smartmeter : stromzaehler - enabled system.adapter.smartthings.0 : smartthings : raspberrypi - disabled + system.adapter.stiebel-isg.0 : stiebel-isg : raspberrypi - enabled + system.adapter.tapo.0 : tapo : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.vesync.0 : vesync : stromzaehler - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : raspberrypi - enabled + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - disabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.0.23 , installed 7.0.23 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 3.0.19 , installed 3.0.19 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss" : 3.6.0 , installed 3.6.0 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "hmip" : 1.23.3 , installed 1.24.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "logparser" : 2.2.2 , installed 2.2.2 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "opendtu" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "scenes" : 3.2.1 , installed 3.2.1 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "stiebel-isg" : 1.7.7 , installed 1.7.7 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-material": 1.3.32, installed 1.3.32 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 20400 States: 16762 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15849 515/cupsd tcp 0 0 0.0.0.0:46801 0.0.0.0:* LISTEN 1000 20203 1783/io.alexa2.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 25772 2178/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3985 555/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 117 14121 620/influxd tcp 0 0 192.168.178.28:2001 0.0.0.0:* LISTEN 1000 24086 2324/io.hm-rpc.0 tcp 0 0 192.168.178.28:2010 0.0.0.0:* LISTEN 1000 23460 2370/io.hm-rpc.1 tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 21518 1181/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 19292 1181/iobroker.js-co tcp6 0 0 :::3389 :::* LISTEN 116 14138 603/xrdp tcp6 0 0 :::20002 :::* LISTEN 1000 24478 2942/io.web.1 tcp6 0 0 :::8089 :::* LISTEN 1000 25435 2957/io.web.3 tcp6 0 0 :::8082 :::* LISTEN 1000 21063 1819/io.admin.0 tcp6 0 0 :::8081 :::* LISTEN 1000 21732 1830/io.admin.1 tcp6 0 0 :::8086 :::* LISTEN 117 18468 620/influxd tcp6 0 0 :::8087 :::* LISTEN 1000 25331 2820/io.simple-api. tcp6 0 0 :::8084 :::* LISTEN 1000 25385 2911/io.ws.0 tcp6 0 0 :::8085 :::* LISTEN 1000 25430 2956/io.web.2 tcp6 0 0 :::1984 :::* LISTEN 1000 29829 3603/go2rtc_linux_a tcp6 0 0 ::1:631 :::* LISTEN 0 15848 515/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 13955 547/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 4013 555/sshd: /usr/sbin tcp6 0 0 :::8554 :::* LISTEN 1000 27203 3603/go2rtc_linux_a tcp6 0 0 :::8555 :::* LISTEN 1000 29830 3603/go2rtc_linux_a tcp6 0 0 :::3000 :::* LISTEN 118 18316 1180/grafana udp 0 0 0.0.0.0:59088 0.0.0.0:* 108 12639 386/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15886 609/dhcpcd udp 0 0 0.0.0.0:6666 0.0.0.0:* 1000 26816 2596/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1000 26817 2596/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16496 668/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12637 386/avahi-daemon: r udp6 0 0 :::546 :::* 0 15898 609/dhcpcd udp6 0 0 :::44201 :::* 108 12640 386/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12638 386/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-23 21:46:37.726 - info: influxdb.0 (1915) Add point that had error for smartmeter.1.1-0:16_7_0__255.value to buffer again, error-count=1 2024-08-23 21:46:37.743 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.709Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.744 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_ZHH_Lieferung to buffer again, error-count=1 2024-08-23 21:46:37.754 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.754 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_wirkleistung_einspeisung to buffer again, error-count=1 2024-08-23 21:46:37.758 - warn: influxdb.0 (1915) Error on writePoint("{"value":338.6,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.759 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_gesamtverbrauch to buffer again, error-count=1 2024-08-23 21:46:37.798 - warn: influxdb.0 (1915) Error on writePoint("{"value":271.9,"time":"2024-08-23T19:46:27.721Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.799 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_HH to buffer again, error-count=1 2024-08-23 21:46:39.011 - warn: influxdb.0 (1915) Error on writePoint("{"value":335,"time":"2024-08-23T19:46:29.001Z","from":"system.adapter.modbus.1","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.011 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_AC_PV to buffer again, error-count=1 2024-08-23 21:46:39.071 - warn: influxdb.0 (1915) Error on writePoint("{"value":334,"time":"2024-08-23T19:46:29.054Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.072 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_Entladen to buffer again, error-count=1 2024-08-23 21:47:58.861 - info: whatsapp-cmb.0 (1871) Send Daniel ist nicht zuhause to +4917621946371 2024-08-23 21:47:58.880 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 3 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:47:58.896 - info: whatsapp-cmb.0 (1871) Send Elisabeth ist zuhause to +4917621946371 2024-08-23 21:47:58.900 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 2 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:50:00.079 - info: onvif.0 (3027) Result of command gotoPreset on device 192_168_178_104_2020: [{"gotoPresetResponse":[""]}] 2024-08-23 21:50:03.099 - info: host.raspberrypi instance system.adapter.daswetter.1 in version "3.1.15" started with pid 7145 -
@Thomas-Braun
hier noch die Ausgabe ausm iob diagSkript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 21:49:01 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Fri 2024-08-23 21:49:01 CEST Universal time: Fri 2024-08-23 19:49:01 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': remotepi HOME=/home/remotepi GROUPS=remotepi sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.4G 372M 12M 1.0G 1.3G Swap: 99M 0B 99M Total: 3.9G 2.4G 472M Active iob-Instances: 50 3794 M total memory 2380 M used memory 2730 M active memory 433 M inactive memory 372 M free memory 61 M buffer memory 980 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:49:02 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 Tasks: 244 total, 1 running, 243 sleeping, 0 stopped, 0 zombie %Cpu(s): 13.5 us, 5.4 sy, 0.0 ni, 81.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 371.8 free, 2380.5 used, 1042.0 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1330.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 58G 34G 22G 61% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.3M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 380M 20K 380M 1% /run/user/1000 tmpfs tmpfs 380M 16K 380M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Fri Aug 23 21:27:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:BD:B5:13 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=353857f1-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): recovery complete [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Aug 23 21:27:33 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Aug 23 21:27:35 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 | | `-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1002 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1002,gid=1002 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 11G /var/ 5.9G /var/log 3.0G /var/cache/apt 3.0G /var/cache 2.9G /var/cache/apt/archives Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 9.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.9G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 628M /opt/iobroker/iobroker-data/history 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 37M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.1e6546bb.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_6ab0a1092a13ec11985b21c7bd930c07-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.23 javascript: 8.7.6 nodejs modules from github: 7 +-- iobroker.alexa2@3.26.5 (git+ssh://git@github.com/Apollon77/ioBroker.alexa2.git#37160cf729a9c70ca70679d4b1d3c16ba51c6456) +-- iobroker.energiefluss@3.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#6f3845de92a5dd659b6cdbc6f097a6199898f0b3) +-- iobroker.fb-checkpresence@1.2.4 (git+ssh://git@github.com/afuerhoff/ioBroker.fb-checkpresence.git#4cf620ccd906543ab5b46de4717eeea5202f0420) +-- iobroker.google-sharedlocations@2.2.1 (git+ssh://git@github.com/Garfonso/ioBroker.google-sharedlocations.git#0db73d57d00aa5dff22ff22e853f1231ce141dc1) +-- iobroker.hmip@1.24.1 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.hmip.git#dc9bd8fb3385684d3650af51a68ba15bf582ca82) +-- iobroker.onvif@1.1.4 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.onvif.git#92a3762c9b8aa813d9a5146fe33dc780613d705e) +-- iobroker.tapo@0.3.3 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#a0e9a3b930c67eceaee5f97d2a48094434838d36) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.backitup.1 : backitup : stromzaehler - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.daswetter.1 : daswetter : raspberrypi - enabled + system.adapter.device-reminder.0 : device-reminder : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - disabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.google-sharedlocations.0 : google-sharedlocations: raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue-extended.0 : hue-extended : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.logparser.0 : logparser : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.opendtu.0 : opendtu : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.roborock.0 : roborock : raspberrypi - enabled system.adapter.scenes.0 : scenes : raspberrypi - disabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : stromzaehler - enabled + system.adapter.smartmeter.1 : smartmeter : stromzaehler - enabled system.adapter.smartthings.0 : smartthings : raspberrypi - disabled + system.adapter.stiebel-isg.0 : stiebel-isg : raspberrypi - enabled + system.adapter.tapo.0 : tapo : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.vesync.0 : vesync : stromzaehler - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : raspberrypi - enabled + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - disabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.0.23 , installed 7.0.23 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 3.0.19 , installed 3.0.19 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss" : 3.6.0 , installed 3.6.0 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "hmip" : 1.23.3 , installed 1.24.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "logparser" : 2.2.2 , installed 2.2.2 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "opendtu" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "scenes" : 3.2.1 , installed 3.2.1 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "stiebel-isg" : 1.7.7 , installed 1.7.7 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-material": 1.3.32, installed 1.3.32 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 20400 States: 16762 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15849 515/cupsd tcp 0 0 0.0.0.0:46801 0.0.0.0:* LISTEN 1000 20203 1783/io.alexa2.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 25772 2178/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3985 555/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 117 14121 620/influxd tcp 0 0 192.168.178.28:2001 0.0.0.0:* LISTEN 1000 24086 2324/io.hm-rpc.0 tcp 0 0 192.168.178.28:2010 0.0.0.0:* LISTEN 1000 23460 2370/io.hm-rpc.1 tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 21518 1181/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 19292 1181/iobroker.js-co tcp6 0 0 :::3389 :::* LISTEN 116 14138 603/xrdp tcp6 0 0 :::20002 :::* LISTEN 1000 24478 2942/io.web.1 tcp6 0 0 :::8089 :::* LISTEN 1000 25435 2957/io.web.3 tcp6 0 0 :::8082 :::* LISTEN 1000 21063 1819/io.admin.0 tcp6 0 0 :::8081 :::* LISTEN 1000 21732 1830/io.admin.1 tcp6 0 0 :::8086 :::* LISTEN 117 18468 620/influxd tcp6 0 0 :::8087 :::* LISTEN 1000 25331 2820/io.simple-api. tcp6 0 0 :::8084 :::* LISTEN 1000 25385 2911/io.ws.0 tcp6 0 0 :::8085 :::* LISTEN 1000 25430 2956/io.web.2 tcp6 0 0 :::1984 :::* LISTEN 1000 29829 3603/go2rtc_linux_a tcp6 0 0 ::1:631 :::* LISTEN 0 15848 515/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 13955 547/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 4013 555/sshd: /usr/sbin tcp6 0 0 :::8554 :::* LISTEN 1000 27203 3603/go2rtc_linux_a tcp6 0 0 :::8555 :::* LISTEN 1000 29830 3603/go2rtc_linux_a tcp6 0 0 :::3000 :::* LISTEN 118 18316 1180/grafana udp 0 0 0.0.0.0:59088 0.0.0.0:* 108 12639 386/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15886 609/dhcpcd udp 0 0 0.0.0.0:6666 0.0.0.0:* 1000 26816 2596/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1000 26817 2596/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16496 668/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12637 386/avahi-daemon: r udp6 0 0 :::546 :::* 0 15898 609/dhcpcd udp6 0 0 :::44201 :::* 108 12640 386/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12638 386/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-23 21:46:37.726 - info: influxdb.0 (1915) Add point that had error for smartmeter.1.1-0:16_7_0__255.value to buffer again, error-count=1 2024-08-23 21:46:37.743 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.709Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.744 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_ZHH_Lieferung to buffer again, error-count=1 2024-08-23 21:46:37.754 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.754 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_wirkleistung_einspeisung to buffer again, error-count=1 2024-08-23 21:46:37.758 - warn: influxdb.0 (1915) Error on writePoint("{"value":338.6,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.759 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_gesamtverbrauch to buffer again, error-count=1 2024-08-23 21:46:37.798 - warn: influxdb.0 (1915) Error on writePoint("{"value":271.9,"time":"2024-08-23T19:46:27.721Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.799 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_HH to buffer again, error-count=1 2024-08-23 21:46:39.011 - warn: influxdb.0 (1915) Error on writePoint("{"value":335,"time":"2024-08-23T19:46:29.001Z","from":"system.adapter.modbus.1","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.011 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_AC_PV to buffer again, error-count=1 2024-08-23 21:46:39.071 - warn: influxdb.0 (1915) Error on writePoint("{"value":334,"time":"2024-08-23T19:46:29.054Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.072 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_Entladen to buffer again, error-count=1 2024-08-23 21:47:58.861 - info: whatsapp-cmb.0 (1871) Send Daniel ist nicht zuhause to +4917621946371 2024-08-23 21:47:58.880 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 3 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:47:58.896 - info: whatsapp-cmb.0 (1871) Send Elisabeth ist zuhause to +4917621946371 2024-08-23 21:47:58.900 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 2 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:50:00.079 - info: onvif.0 (3027) Result of command gotoPreset on device 192_168_178_104_2020: [{"gotoPresetResponse":[""]}] 2024-08-23 21:50:03.099 - info: host.raspberrypi instance system.adapter.daswetter.1 in version "3.1.15" started with pid 7145@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
Da gibt es mehrere Probleme:
[Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): recovery complete
Previously detected issues:
~ Under-voltage has occurred
~ Soft temperature limit has occurredUserland 32 bit
Boot Target: graphical.target
Kurz und knapp: Der wird zu heiß und das Netzteil passt nicht. Das Dateisystem bzw. der Datenträger hat einen Treffer weg. 32 statt 64 Bit BS. Es wird keine graphische Oberfläche auf einem Server benötigt.
Ro75.
SERVER = Beelink U59 16GB DDR4 RAM 512GB SSD, FB 7490, FritzDect 200+301+440, ConBee II, Zigbee Aqara Sensoren + NOUS A1Z, NOUS A1T, Philips Hue ** ioBroker, REDIS, influxdb2, Grafana, PiHole, Plex-Mediaserver, paperless-ngx (Docker), MariaDB + phpmyadmin *** VIS-Runtime = Intel NUC 8GB RAM 128GB SSD + 24" Touchscreen
-
@Thomas-Braun
hier noch die Ausgabe ausm iob diagSkript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 21:49:01 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Fri 2024-08-23 21:49:01 CEST Universal time: Fri 2024-08-23 19:49:01 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': remotepi HOME=/home/remotepi GROUPS=remotepi sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.4G 372M 12M 1.0G 1.3G Swap: 99M 0B 99M Total: 3.9G 2.4G 472M Active iob-Instances: 50 3794 M total memory 2380 M used memory 2730 M active memory 433 M inactive memory 372 M free memory 61 M buffer memory 980 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:49:02 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 Tasks: 244 total, 1 running, 243 sleeping, 0 stopped, 0 zombie %Cpu(s): 13.5 us, 5.4 sy, 0.0 ni, 81.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 371.8 free, 2380.5 used, 1042.0 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1330.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 58G 34G 22G 61% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.3M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 380M 20K 380M 1% /run/user/1000 tmpfs tmpfs 380M 16K 380M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Fri Aug 23 21:27:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:BD:B5:13 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=353857f1-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): recovery complete [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Aug 23 21:27:33 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Aug 23 21:27:35 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 | | `-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1002 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1002,gid=1002 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 11G /var/ 5.9G /var/log 3.0G /var/cache/apt 3.0G /var/cache 2.9G /var/cache/apt/archives Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 9.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.9G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 628M /opt/iobroker/iobroker-data/history 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 37M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.1e6546bb.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_6ab0a1092a13ec11985b21c7bd930c07-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.23 javascript: 8.7.6 nodejs modules from github: 7 +-- iobroker.alexa2@3.26.5 (git+ssh://git@github.com/Apollon77/ioBroker.alexa2.git#37160cf729a9c70ca70679d4b1d3c16ba51c6456) +-- iobroker.energiefluss@3.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#6f3845de92a5dd659b6cdbc6f097a6199898f0b3) +-- iobroker.fb-checkpresence@1.2.4 (git+ssh://git@github.com/afuerhoff/ioBroker.fb-checkpresence.git#4cf620ccd906543ab5b46de4717eeea5202f0420) +-- iobroker.google-sharedlocations@2.2.1 (git+ssh://git@github.com/Garfonso/ioBroker.google-sharedlocations.git#0db73d57d00aa5dff22ff22e853f1231ce141dc1) +-- iobroker.hmip@1.24.1 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.hmip.git#dc9bd8fb3385684d3650af51a68ba15bf582ca82) +-- iobroker.onvif@1.1.4 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.onvif.git#92a3762c9b8aa813d9a5146fe33dc780613d705e) +-- iobroker.tapo@0.3.3 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#a0e9a3b930c67eceaee5f97d2a48094434838d36) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.backitup.1 : backitup : stromzaehler - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.daswetter.1 : daswetter : raspberrypi - enabled + system.adapter.device-reminder.0 : device-reminder : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - disabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.google-sharedlocations.0 : google-sharedlocations: raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue-extended.0 : hue-extended : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.logparser.0 : logparser : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.opendtu.0 : opendtu : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.roborock.0 : roborock : raspberrypi - enabled system.adapter.scenes.0 : scenes : raspberrypi - disabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : stromzaehler - enabled + system.adapter.smartmeter.1 : smartmeter : stromzaehler - enabled system.adapter.smartthings.0 : smartthings : raspberrypi - disabled + system.adapter.stiebel-isg.0 : stiebel-isg : raspberrypi - enabled + system.adapter.tapo.0 : tapo : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.vesync.0 : vesync : stromzaehler - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : raspberrypi - enabled + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - disabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.0.23 , installed 7.0.23 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 3.0.19 , installed 3.0.19 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss" : 3.6.0 , installed 3.6.0 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "hmip" : 1.23.3 , installed 1.24.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "logparser" : 2.2.2 , installed 2.2.2 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "opendtu" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "scenes" : 3.2.1 , installed 3.2.1 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "stiebel-isg" : 1.7.7 , installed 1.7.7 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-material": 1.3.32, installed 1.3.32 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 20400 States: 16762 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15849 515/cupsd tcp 0 0 0.0.0.0:46801 0.0.0.0:* LISTEN 1000 20203 1783/io.alexa2.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 25772 2178/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3985 555/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 117 14121 620/influxd tcp 0 0 192.168.178.28:2001 0.0.0.0:* LISTEN 1000 24086 2324/io.hm-rpc.0 tcp 0 0 192.168.178.28:2010 0.0.0.0:* LISTEN 1000 23460 2370/io.hm-rpc.1 tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 21518 1181/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 19292 1181/iobroker.js-co tcp6 0 0 :::3389 :::* LISTEN 116 14138 603/xrdp tcp6 0 0 :::20002 :::* LISTEN 1000 24478 2942/io.web.1 tcp6 0 0 :::8089 :::* LISTEN 1000 25435 2957/io.web.3 tcp6 0 0 :::8082 :::* LISTEN 1000 21063 1819/io.admin.0 tcp6 0 0 :::8081 :::* LISTEN 1000 21732 1830/io.admin.1 tcp6 0 0 :::8086 :::* LISTEN 117 18468 620/influxd tcp6 0 0 :::8087 :::* LISTEN 1000 25331 2820/io.simple-api. tcp6 0 0 :::8084 :::* LISTEN 1000 25385 2911/io.ws.0 tcp6 0 0 :::8085 :::* LISTEN 1000 25430 2956/io.web.2 tcp6 0 0 :::1984 :::* LISTEN 1000 29829 3603/go2rtc_linux_a tcp6 0 0 ::1:631 :::* LISTEN 0 15848 515/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 13955 547/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 4013 555/sshd: /usr/sbin tcp6 0 0 :::8554 :::* LISTEN 1000 27203 3603/go2rtc_linux_a tcp6 0 0 :::8555 :::* LISTEN 1000 29830 3603/go2rtc_linux_a tcp6 0 0 :::3000 :::* LISTEN 118 18316 1180/grafana udp 0 0 0.0.0.0:59088 0.0.0.0:* 108 12639 386/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15886 609/dhcpcd udp 0 0 0.0.0.0:6666 0.0.0.0:* 1000 26816 2596/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1000 26817 2596/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16496 668/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12637 386/avahi-daemon: r udp6 0 0 :::546 :::* 0 15898 609/dhcpcd udp6 0 0 :::44201 :::* 108 12640 386/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12638 386/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-23 21:46:37.726 - info: influxdb.0 (1915) Add point that had error for smartmeter.1.1-0:16_7_0__255.value to buffer again, error-count=1 2024-08-23 21:46:37.743 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.709Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.744 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_ZHH_Lieferung to buffer again, error-count=1 2024-08-23 21:46:37.754 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.754 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_wirkleistung_einspeisung to buffer again, error-count=1 2024-08-23 21:46:37.758 - warn: influxdb.0 (1915) Error on writePoint("{"value":338.6,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.759 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_gesamtverbrauch to buffer again, error-count=1 2024-08-23 21:46:37.798 - warn: influxdb.0 (1915) Error on writePoint("{"value":271.9,"time":"2024-08-23T19:46:27.721Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.799 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_HH to buffer again, error-count=1 2024-08-23 21:46:39.011 - warn: influxdb.0 (1915) Error on writePoint("{"value":335,"time":"2024-08-23T19:46:29.001Z","from":"system.adapter.modbus.1","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.011 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_AC_PV to buffer again, error-count=1 2024-08-23 21:46:39.071 - warn: influxdb.0 (1915) Error on writePoint("{"value":334,"time":"2024-08-23T19:46:29.054Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.072 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_Entladen to buffer again, error-count=1 2024-08-23 21:47:58.861 - info: whatsapp-cmb.0 (1871) Send Daniel ist nicht zuhause to +4917621946371 2024-08-23 21:47:58.880 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 3 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:47:58.896 - info: whatsapp-cmb.0 (1871) Send Elisabeth ist zuhause to +4917621946371 2024-08-23 21:47:58.900 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 2 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:50:00.079 - info: onvif.0 (3027) Result of command gotoPreset on device 192_168_178_104_2020: [{"gotoPresetResponse":[""]}] 2024-08-23 21:50:03.099 - info: host.raspberrypi instance system.adapter.daswetter.1 in version "3.1.15" started with pid 7145@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
Previously detected issues:
Da ist dein Netzteil zu schwach, und wsrm wird's dem kleinen auch.
dadurch oder weil er an seine Grenzen kommt:
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:21:49:01 up 21 min, 3 users, load average: 3.11, 2.25, 1.83und dein Dateisystem hat's auch schon gefetzt.
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
das solltest du auch tun:
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
nodejs modules from github: 7
warum von github?
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@Thomas-Braun
hier noch die Ausgabe ausm iob diagSkript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 21:49:01 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Fri 2024-08-23 21:49:01 CEST Universal time: Fri 2024-08-23 19:49:01 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': remotepi HOME=/home/remotepi GROUPS=remotepi sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.4G 372M 12M 1.0G 1.3G Swap: 99M 0B 99M Total: 3.9G 2.4G 472M Active iob-Instances: 50 3794 M total memory 2380 M used memory 2730 M active memory 433 M inactive memory 372 M free memory 61 M buffer memory 980 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:49:02 up 21 min, 3 users, load average: 3.11, 2.25, 1.83 Tasks: 244 total, 1 running, 243 sleeping, 0 stopped, 0 zombie %Cpu(s): 13.5 us, 5.4 sy, 0.0 ni, 81.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 371.8 free, 2380.5 used, 1042.0 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1330.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 58G 34G 22G 61% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.3M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 380M 20K 380M 1% /run/user/1000 tmpfs tmpfs 380M 16K 380M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Fri Aug 23 21:27:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:BD:B5:13 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=353857f1-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Fri Aug 23 21:27:32 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): recovery complete [Fri Aug 23 21:27:33 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Aug 23 21:27:33 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Aug 23 21:27:35 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 | | `-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1002 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1002,gid=1002 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 11G /var/ 5.9G /var/log 3.0G /var/cache/apt 3.0G /var/cache 2.9G /var/cache/apt/archives Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 9.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.9G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 628M /opt/iobroker/iobroker-data/history 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 37M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.1e6546bb.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_6ab0a1092a13ec11985b21c7bd930c07-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.23 javascript: 8.7.6 nodejs modules from github: 7 +-- iobroker.alexa2@3.26.5 (git+ssh://git@github.com/Apollon77/ioBroker.alexa2.git#37160cf729a9c70ca70679d4b1d3c16ba51c6456) +-- iobroker.energiefluss@3.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#6f3845de92a5dd659b6cdbc6f097a6199898f0b3) +-- iobroker.fb-checkpresence@1.2.4 (git+ssh://git@github.com/afuerhoff/ioBroker.fb-checkpresence.git#4cf620ccd906543ab5b46de4717eeea5202f0420) +-- iobroker.google-sharedlocations@2.2.1 (git+ssh://git@github.com/Garfonso/ioBroker.google-sharedlocations.git#0db73d57d00aa5dff22ff22e853f1231ce141dc1) +-- iobroker.hmip@1.24.1 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.hmip.git#dc9bd8fb3385684d3650af51a68ba15bf582ca82) +-- iobroker.onvif@1.1.4 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.onvif.git#92a3762c9b8aa813d9a5146fe33dc780613d705e) +-- iobroker.tapo@0.3.3 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#a0e9a3b930c67eceaee5f97d2a48094434838d36) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.backitup.1 : backitup : stromzaehler - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.daswetter.1 : daswetter : raspberrypi - enabled + system.adapter.device-reminder.0 : device-reminder : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - disabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.google-sharedlocations.0 : google-sharedlocations: raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue-extended.0 : hue-extended : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.logparser.0 : logparser : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.opendtu.0 : opendtu : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.roborock.0 : roborock : raspberrypi - enabled system.adapter.scenes.0 : scenes : raspberrypi - disabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : stromzaehler - enabled + system.adapter.smartmeter.1 : smartmeter : stromzaehler - enabled system.adapter.smartthings.0 : smartthings : raspberrypi - disabled + system.adapter.stiebel-isg.0 : stiebel-isg : raspberrypi - enabled + system.adapter.tapo.0 : tapo : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.vesync.0 : vesync : stromzaehler - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : raspberrypi - enabled + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - disabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : raspberrypi - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.web.2 : web : raspberrypi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.web.3 : web : raspberrypi - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.0.23 , installed 7.0.23 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 3.0.19 , installed 3.0.19 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss" : 3.6.0 , installed 3.6.0 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "hmip" : 1.23.3 , installed 1.24.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "logparser" : 2.2.2 , installed 2.2.2 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "opendtu" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "scenes" : 3.2.1 , installed 3.2.1 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "stiebel-isg" : 1.7.7 , installed 1.7.7 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-material": 1.3.32, installed 1.3.32 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 20400 States: 16762 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15849 515/cupsd tcp 0 0 0.0.0.0:46801 0.0.0.0:* LISTEN 1000 20203 1783/io.alexa2.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 25772 2178/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3985 555/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 117 14121 620/influxd tcp 0 0 192.168.178.28:2001 0.0.0.0:* LISTEN 1000 24086 2324/io.hm-rpc.0 tcp 0 0 192.168.178.28:2010 0.0.0.0:* LISTEN 1000 23460 2370/io.hm-rpc.1 tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 21518 1181/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 19292 1181/iobroker.js-co tcp6 0 0 :::3389 :::* LISTEN 116 14138 603/xrdp tcp6 0 0 :::20002 :::* LISTEN 1000 24478 2942/io.web.1 tcp6 0 0 :::8089 :::* LISTEN 1000 25435 2957/io.web.3 tcp6 0 0 :::8082 :::* LISTEN 1000 21063 1819/io.admin.0 tcp6 0 0 :::8081 :::* LISTEN 1000 21732 1830/io.admin.1 tcp6 0 0 :::8086 :::* LISTEN 117 18468 620/influxd tcp6 0 0 :::8087 :::* LISTEN 1000 25331 2820/io.simple-api. tcp6 0 0 :::8084 :::* LISTEN 1000 25385 2911/io.ws.0 tcp6 0 0 :::8085 :::* LISTEN 1000 25430 2956/io.web.2 tcp6 0 0 :::1984 :::* LISTEN 1000 29829 3603/go2rtc_linux_a tcp6 0 0 ::1:631 :::* LISTEN 0 15848 515/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 13955 547/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 4013 555/sshd: /usr/sbin tcp6 0 0 :::8554 :::* LISTEN 1000 27203 3603/go2rtc_linux_a tcp6 0 0 :::8555 :::* LISTEN 1000 29830 3603/go2rtc_linux_a tcp6 0 0 :::3000 :::* LISTEN 118 18316 1180/grafana udp 0 0 0.0.0.0:59088 0.0.0.0:* 108 12639 386/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15886 609/dhcpcd udp 0 0 0.0.0.0:6666 0.0.0.0:* 1000 26816 2596/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1000 26817 2596/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16496 668/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12637 386/avahi-daemon: r udp6 0 0 :::546 :::* 0 15898 609/dhcpcd udp6 0 0 :::44201 :::* 108 12640 386/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12638 386/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-23 21:46:37.726 - info: influxdb.0 (1915) Add point that had error for smartmeter.1.1-0:16_7_0__255.value to buffer again, error-count=1 2024-08-23 21:46:37.743 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.709Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.744 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_ZHH_Lieferung to buffer again, error-count=1 2024-08-23 21:46:37.754 - warn: influxdb.0 (1915) Error on writePoint("{"value":-61.1,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.754 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_wirkleistung_einspeisung to buffer again, error-count=1 2024-08-23 21:46:37.758 - warn: influxdb.0 (1915) Error on writePoint("{"value":338.6,"time":"2024-08-23T19:46:27.710Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.759 - info: influxdb.0 (1915) Add point that had error for 0_userdata.0.Datenpunkte.PV.watt_gesamtverbrauch to buffer again, error-count=1 2024-08-23 21:46:37.798 - warn: influxdb.0 (1915) Error on writePoint("{"value":271.9,"time":"2024-08-23T19:46:27.721Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:37.799 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_HH to buffer again, error-count=1 2024-08-23 21:46:39.011 - warn: influxdb.0 (1915) Error on writePoint("{"value":335,"time":"2024-08-23T19:46:29.001Z","from":"system.adapter.modbus.1","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.011 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_AC_PV to buffer again, error-count=1 2024-08-23 21:46:39.071 - warn: influxdb.0 (1915) Error on writePoint("{"value":334,"time":"2024-08-23T19:46:29.054Z","from":"system.adapter.javascript.0","q":0,"ack":true}): Error: {"error":"timeout"} / "{\"error\":\"timeout\"}\n"" 2024-08-23 21:46:39.072 - info: influxdb.0 (1915) Add point that had error for alias.0.Energiefluss.P_Entladen to buffer again, error-count=1 2024-08-23 21:47:58.861 - info: whatsapp-cmb.0 (1871) Send Daniel ist nicht zuhause to +4917621946371 2024-08-23 21:47:58.880 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 3 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:47:58.896 - info: whatsapp-cmb.0 (1871) Send Elisabeth ist zuhause to +4917621946371 2024-08-23 21:47:58.900 - info: whatsapp-cmb.0 (1871) Send Lüftung Stufe 2 an, Außentemperatur kleiner Raumtemperatur to +4917621946371 2024-08-23 21:50:00.079 - info: onvif.0 (3027) Result of command gotoPreset on device 192_168_178_104_2020: [{"gotoPresetResponse":[""]}] 2024-08-23 21:50:03.099 - info: host.raspberrypi instance system.adapter.daswetter.1 in version "3.1.15" started with pid 7145@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
Boot Target: graphical.target
Mach das AUS!
Raspbian GNU/Linux 11 (bullseye)
Bring das in nächster Zeit auf das Bookworm-Release. Geht aber nur per kompletter Neuinstallation.
Neben anderen Kinken:
-
system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
-
system.adapter.admin.1 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
Zweimal admin auf dem gleichen Port geht nicht.
Un warum 2x Backup?
-
-
vielen Dank euch dreien ( @Homoran @Ro75 @Thomas-Braun ) für die Diagnose.
Die Installation ist ein gewachsenes System bei der ich im am Anfang viel rumprobiert hatte, bis ich meinen Weg gefunden habe.
Hin und wieder bleibt er mir auch hängen, weshalb ich schon am Vorbereiten einer kompletten Neuinstallation bin. Leider habe ich noch nicht den Schwung bekommen, den Umzug auf die Neuinstallation wirklich durchzuziehen.
Die Themen die ihr genannt habt erklären dann Natürlich das Aufhängen des Systems.Das Netzteil hatte ich damals mit dem Raspberry im Bundle bestellt. Deshalb dachte ich eigentlich das passt.
Das mit dem Dateisystem kann ich mir jetzt ad hoc nicht erklären, aber ich hoffe das löst sich dann mit dem Umzug auf die Neuinstallation.
GUI wird auf der Neuinstallation natürlich nicht erst aktiviert.
Zigbee läuft bisher ohne Probleme. Daher hatte ich danach noch nicht geschaut.
nodejs hatte ich gemäß der Anleitung ausm Forum installiert. Warum das von github kommen soll erschließt sich mir nicht.
die zweite Instanz Backup läuft wegen dem Slave-Host. Ist das nicht nötig? Ich hatte in der Master-Backup-Instanz so verstanden.
Port Admin passe ich an.
Ich schätze ich habe jetzt am Wochenende zu tun :see_no_evil:
Danke nochmal für eure Anlayse.
-
vielen Dank euch dreien ( @Homoran @Ro75 @Thomas-Braun ) für die Diagnose.
Die Installation ist ein gewachsenes System bei der ich im am Anfang viel rumprobiert hatte, bis ich meinen Weg gefunden habe.
Hin und wieder bleibt er mir auch hängen, weshalb ich schon am Vorbereiten einer kompletten Neuinstallation bin. Leider habe ich noch nicht den Schwung bekommen, den Umzug auf die Neuinstallation wirklich durchzuziehen.
Die Themen die ihr genannt habt erklären dann Natürlich das Aufhängen des Systems.Das Netzteil hatte ich damals mit dem Raspberry im Bundle bestellt. Deshalb dachte ich eigentlich das passt.
Das mit dem Dateisystem kann ich mir jetzt ad hoc nicht erklären, aber ich hoffe das löst sich dann mit dem Umzug auf die Neuinstallation.
GUI wird auf der Neuinstallation natürlich nicht erst aktiviert.
Zigbee läuft bisher ohne Probleme. Daher hatte ich danach noch nicht geschaut.
nodejs hatte ich gemäß der Anleitung ausm Forum installiert. Warum das von github kommen soll erschließt sich mir nicht.
die zweite Instanz Backup läuft wegen dem Slave-Host. Ist das nicht nötig? Ich hatte in der Master-Backup-Instanz so verstanden.
Port Admin passe ich an.
Ich schätze ich habe jetzt am Wochenende zu tun :see_no_evil:
Danke nochmal für eure Anlayse.
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
Zigbee läuft bisher ohne Probleme. Daher hatte ich danach noch nicht geschaut.
nach einem Neustart bekommt der ggf. einen anderen usb-Port zugewiesen. Deswegen auf by-id einrichten. dann ist der Port egal.
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
Warum das von github kommen soll erschließt sich mir nicht.
nicht node selbst, sondern 7 Adapter und deren nodejs Module
@saarlanduhu sagte in js-controller 6.0.9. hmip.0 Adapter funktioniert nicht mehr:
die zweite Instanz Backup läuft wegen dem Slave-Host. Ist das nicht nötig?
nur wenn influx, zigbee o.ä. auf dem Slave läuft
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
Guten Morgen zusammen,
ich wollte nur nochmal eine kurze Rückmeldung geben.
Ich mein System jetzt auf neuer Hardware neu aufgesetzt und alle Fallstricke, die ihr oben genannt hattet, aus der Welt geschafft.
Habe das System jetzt auch auf ner SSD laufen, sodass ich das Thema einer plötzlich sterbenden SD-Karte auch nicht haben werde.
Vielen Dank nochmal für eure Analysen und Unterstützungen.
883
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge
ioBroker Community 2014-2025
