iobroker cmd in Konsole geht nicht
-
@hukio sagte in iobroker cmd in Konsole geht nicht:
User that is running 'js-controller':
piDas muss der user 'iobroker' sein.
Was haste da bitte gemacht? -
@thomas-braun
Habe ich in der ersten mail skizziert. Mehr Einzelheiten kann ich chronologisch nicht sagen. Wie kann ich den Fehler ändern?systemctl status iobroker.service -
systemctl status iobroker.service -
pi@raspibull:~ $ systemctl status iobroker.service ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead)systemctl status mask iobroker.service systemctl status unmask iobroker.service -
Ich habe ein update/upgrade des OS gemacht. Das in einen dpkg Fehler lief (problem mit node 18.20.4 update (war 18.19.x)). IOB startete nicht mehr. Habe dann nodejs alleine upgrade gemacht. Das iobroker system konnte ich mit
node node_modules/iobroker.js-controller/controller.js --logs
erfolgreich starten.Alle iobroker cmd in der Konsole geben keine Antwort. Iobroker startet nicht nach reboot.
Meine Installation Raspberry Pi4 mit Bullseye
jetzt node 18.20.4 npm 10.7.0Wie kann ich die iobroker Befehle in der Konsole wieder herstellen?
Danke
HUK
PS:pi@raspibull:~ $ systemctl status iobroker.service ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead)@hukio sagte in iobroker cmd in Konsole geht nicht:
Ich habe ein update/upgrade des OS gemacht. Das in einen dpkg Fehler lief (problem mit node 18.20.4 update (war 18.19.x)). IOB startete nicht mehr. Habe dann nodejs alleine upgrade gemacht.
Kannst du ggfs. die letzten Befehle in der Konsole mal posten, also die die obiges betreffen. In der Konsole sollte man diese sehen, mit der Pfeiltaste nach oben bzw. nach unten.
Ro75.
-
systemctl status mask iobroker.service systemctl status unmask iobroker.servicepi@raspibull:~ $ systemctl status mask iobroker.service Unit mask.service could not be found. ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead) pi@raspibull:~ $ systemctl status unmask iobroker.service Unit unmask.service could not be found. ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead) -
pi@raspibull:~ $ systemctl status mask iobroker.service Unit mask.service could not be found. ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead) pi@raspibull:~ $ systemctl status unmask iobroker.service Unit unmask.service could not be found. ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead)Sorry, Quatsch von mir...
sudo systemctl mask iobroker.service sudo systemctl unmask iobroker.service -
@hukio sagte in iobroker cmd in Konsole geht nicht:
Ich habe ein update/upgrade des OS gemacht. Das in einen dpkg Fehler lief (problem mit node 18.20.4 update (war 18.19.x)). IOB startete nicht mehr. Habe dann nodejs alleine upgrade gemacht.
Kannst du ggfs. die letzten Befehle in der Konsole mal posten, also die die obiges betreffen. In der Konsole sollte man diese sehen, mit der Pfeiltaste nach oben bzw. nach unten.
Ro75.
-
Sorry, Quatsch von mir...
sudo systemctl mask iobroker.service sudo systemctl unmask iobroker.servicepi@raspibull:~ $ sudo systemctl mask iobroker.service Created symlink /etc/systemd/system/iobroker.service → /dev/null. pi@raspibull:~ $ sudo systemctl unmask iobroker.service Removed /etc/systemd/system/iobroker.service. -
@ro75
Habe aus Versehen diesen Befehl abgesetzt.sudo ln -s /usr/bin/node /usr/bin/nodejsvorher diesen
sudo dpkg --configure -amehr finde ich nicht
Da frag ich mir nur... WARUM??
Mit dpgk direkt hast du in der Regel nix am Hut.
systemctl status iobroker.servicesagt nun?
-
Da frag ich mir nur... WARUM??
Mit dpgk direkt hast du in der Regel nix am Hut.
systemctl status iobroker.servicesagt nun?
-
pi@raspibull:~ $ systemctl status iobroker.service ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead)weil ich einen Fehler mit dpkg hatte.
@hukio sagte in iobroker cmd in Konsole geht nicht:
weil ich einen Fehler mit dpkg hatte.
Und genau was wurde von dpkg bemängelt?
sudo apt install --reinstall nodejs sudo reboot -
@hukio sagte in iobroker cmd in Konsole geht nicht:
weil ich einen Fehler mit dpkg hatte.
Und genau was wurde von dpkg bemängelt?
sudo apt install --reinstall nodejs sudo rebootpi@raspibull:~ $ sudo apt install --reinstall nodejs Reading package lists... Done Building dependency tree... Done Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/28.9 MB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 59474 files and directories currently installed.) Preparing to unpack .../nodejs_18.20.4-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (18.20.4-1nodesource1) over (18.20.4-1nodesource1) ... Setting up nodejs (18.20.4-1nodesource1) ... Processing triggers for man-db (2.9.4-2) ...nach reboot iobroker startet nicht. cmd geht nicht
-
pi@raspibull:~ $ sudo apt install --reinstall nodejs Reading package lists... Done Building dependency tree... Done Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/28.9 MB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 59474 files and directories currently installed.) Preparing to unpack .../nodejs_18.20.4-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (18.20.4-1nodesource1) over (18.20.4-1nodesource1) ... Setting up nodejs (18.20.4-1nodesource1) ... Processing triggers for man-db (2.9.4-2) ...nach reboot iobroker startet nicht. cmd geht nicht
sudo -u iobroker id systemctl status iobroker.serviceJag den Fixer mal über das System:
curl -fsL https://iobroker.net/fix.sh | bash - -
sudo -u iobroker id systemctl status iobroker.serviceJag den Fixer mal über das System:
curl -fsL https://iobroker.net/fix.sh | bash -@thomas-braun
Das war es! cmd und iobroker laufen wieder.pi@raspibull:~ $ sudo -u iobroker id uid=1001(iobroker) gid=1001(iobroker) groups=1001(iobroker),5(tty),20(dialout),29(audio),44(video),46(plugdev),112(bluetooth),114(redis),997(gpio),998(i2c) pi@raspibull:~ $ systemctl status iobroker.service ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead) pi@raspibull:~ $ curl -fsL https://iobroker.net/fix.sh | bash - library: loaded Library version=2024-05-24 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Done ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 1 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again!Vielen Dank für die Mühe. Ich frage immer zu spät, bzw. ich versuche es erst mal selbst. Habe aber nicht den background.
Nochmals Danke
HUK -
@thomas-braun
Das war es! cmd und iobroker laufen wieder.pi@raspibull:~ $ sudo -u iobroker id uid=1001(iobroker) gid=1001(iobroker) groups=1001(iobroker),5(tty),20(dialout),29(audio),44(video),46(plugdev),112(bluetooth),114(redis),997(gpio),998(i2c) pi@raspibull:~ $ systemctl status iobroker.service ● iobroker.service Loaded: masked (Reason: Unit iobroker.service is masked.) Active: inactive (dead) pi@raspibull:~ $ curl -fsL https://iobroker.net/fix.sh | bash - library: loaded Library version=2024-05-24 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Done ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 1 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again!Vielen Dank für die Mühe. Ich frage immer zu spät, bzw. ich versuche es erst mal selbst. Habe aber nicht den background.
Nochmals Danke
HUKDann bring die Kiste nun auf nodejs@20 und zeig dann nochmal die Langfassung von
iob nodejs-update 20 iob diag -
@thomas-braun
Sorry, hab erst mal einen Kaffee zur Entspannung getrunken.Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspibull Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 19:59:36 up 1:20, 3 users, load average: 1.59, 1.72, 1.53 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-07-19 19:59:36 CEST Universal time: Fri 2024-07-19 17:59:36 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth redis gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.0G 535M 1.0M 1.2G 1.8G Swap: 2.0G 0B 2.0G Total: 5.8G 2.0G 2.6G Active iob-Instances: 30 3793 M total memory 2037 M used memory 2141 M active memory 844 M inactive memory 535 M free memory 122 M buffer memory 1098 M swap cache 2027 M total swap 0 M used swap 2027 M free swap *** top - Table Of Processes *** top - 19:59:36 up 1:20, 3 users, load average: 1.59, 1.72, 1.53 Tasks: 196 total, 2 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 8.1 us, 4.1 sy, 0.0 ni, 87.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3793.3 total, 535.2 free, 2037.4 used, 1220.7 buff/cache MiB Swap: 2028.0 total, 2028.0 free, 0.0 used. 1797.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 30G 20G 8.2G 71% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda3 ext4 439G 3.9G 413G 1% /mnt/hukdata /dev/sda1 vfat 256M 32M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jul 19 18:39:23 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:12:1E:93 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=4d904d30-02 rootfstype=ext4 fsck.repair=yes rootwait rootdelay=5 [Fri Jul 19 18:39:31 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jul 19 18:39:31 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Jul 19 18:39:33 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. [Fri Jul 19 18:39:35 2024] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1677960k,nr_inodes=419490,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=776876k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388436k,nr_inodes=97109,mode=700,uid=1000,gid=1000 |-/mnt/hukdata /dev/sda3 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.9G /var/ 3.1G /var/log 3.0G /var/log/journal/1ffd49df1b3a44ffb614b2c58029c285 3.0G /var/log/journal 660M /var/cache Archived and active journals take up 2.9G in the file system. /opt/iobroker/backups: 7.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 871M /opt/iobroker/iobroker-data/ 356M /opt/iobroker/iobroker-data/files 342M /opt/iobroker/iobroker-data/history 138M /opt/iobroker/iobroker-data/files/javascript.admin 129M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 26M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.8947f24d.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_323adb3b74d9eb11b6e6178e6fe9f4d9-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.15.1 /usr/bin/node v20.15.1 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.15.1-1nodesource1 Candidate: 20.15.1-1nodesource1 Version table: *** 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.17.14 javascript: 8.3.1 nodejs modules from github: 1 +-- iobroker.rtspstream@0.0.4 (git+ssh://git@github.com/dbweb-ch/ioBroker.rtspStream.git#adff9611d3ab1871cd94d2e779b9fd4fcc937353) Adapter State system.adapter.adb.0 : adb : raspibull - disabled + system.adapter.admin.0 : admin : raspibull - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspibull - enabled + system.adapter.backitup.0 : backitup : raspibull - enabled system.adapter.broadlink2.0 : broadlink2 : raspibull - disabled + system.adapter.daikin.0 : daikin : raspibull - enabled + system.adapter.daikin.1 : daikin : raspibull - enabled system.adapter.discovery.0 : discovery : raspibull - disabled + system.adapter.doorbird.0 : doorbird : raspibull - enabled + system.adapter.email.0 : email : raspibull - enabled + system.adapter.email.1 : email : raspibull - disabled system.adapter.flot.0 : flot : raspibull - disabled + system.adapter.fritzdect.0 : fritzdect : raspibull - enabled system.adapter.fullybrowser.0 : fullybrowser : raspibull - disabled + system.adapter.history.0 : history : raspibull - enabled + system.adapter.influxdb.0 : influxdb : raspibull - enabled, port: 8086 + system.adapter.iot.0 : iot : raspibull - enabled + system.adapter.iqontrol.0 : iqontrol : raspibull - enabled + system.adapter.javascript.0 : javascript : raspibull - enabled + system.adapter.lgtv.0 : lgtv : raspibull - enabled + system.adapter.mqtt.0 : mqtt : raspibull - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.netatmo.0 : netatmo : raspibull - enabled + system.adapter.nuki-extended.0 : nuki-extended : raspibull - enabled + system.adapter.onkyo.0 : onkyo : raspibull - enabled system.adapter.onvif.0 : onvif : raspibull - disabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.onvif.1 : onvif : raspibull - disabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.ping.0 : ping : raspibull - disabled system.adapter.robonect.0 : robonect : raspibull - disabled + system.adapter.scenes.0 : scenes : raspibull - enabled + system.adapter.shelly.0 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.signal-cmb.0 : signal-cmb : raspibull - enabled + system.adapter.simple-api.0 : simple-api : raspibull - enabled, port: 8087, bind: 192.168.178.78, run as: admin + system.adapter.socketio.0 : socketio : raspibull - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspibull - enabled, port: 1889, bind: 0.0.0.0 system.adapter.telegram.0 : telegram : raspibull - disabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspibull - disabled + system.adapter.tr-064.0 : tr-064 : raspibull - enabled system.adapter.weatherunderground.0 : weatherunderground : raspibull - disabled + system.adapter.web.0 : web : raspibull - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspibull - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspibull - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspibull - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspibull - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspibull - enabled, port: 8087, bind: 192.168.178.78, run as: admin + system.adapter.socketio.0 : socketio : raspibull - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspibull - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.web.0 : web : raspibull - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspibull - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "adb" : 0.0.7 , installed 0.0.7 Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "daikin" : 1.4.2 , installed 1.4.2 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "doorbird" : 1.6.0 , installed 1.6.0 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nuki-extended": 2.7.0 , installed 2.7.0 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "robonect" : 1.3.6 , installed 1.3.6 Adapter "scenes" : 3.0.4 , installed 3.0.4 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "signal-cmb" : 0.3.0 , installed 0.3.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 3.3.2 , installed 3.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 11797 States: 8235 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:6 https://repos.influxdata.com/debian stable InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 13736 778/influxd tcp 0 0 192.168.178.78:8087 0.0.0.0:* LISTEN 1001 65522 7315/io.simple-api. tcp 0 0 192.168.178.78:8100 0.0.0.0:* LISTEN 1001 66435 7184/io.doorbird.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14502 555/sshd: /usr/sbin tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 79079 9094/adb tcp 0 0 0.0.0.0:1889 0.0.0.0:* LISTEN 1001 68076 7113/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 67385 7177/io.shelly.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 66341 7080/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 65132 6872/iobroker.js-co tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 110 12228 538/redis-server 12 tcp6 0 0 :::3000 :::* LISTEN 111 13919 1039/grafana tcp6 0 0 :::51989 :::* LISTEN 1001 65452 7094/io.nuki-extend tcp6 0 0 :::22 :::* LISTEN 0 14513 555/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 1980 778/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 67467 7339/io.socketio.0 tcp6 0 0 :::8082 :::* LISTEN 1001 67486 7363/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 65204 6894/io.admin.0 tcp6 0 0 ::1:6379 :::* LISTEN 110 12229 538/redis-server 12 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14420 430/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 67442 7112/io.shelly.0 udp 0 0 0.0.0.0:46765 0.0.0.0:* 1001 88232 7095/io.onkyo.0 udp 0 1536 0.0.0.0:59344 0.0.0.0:* 1001 88278 7095/io.onkyo.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13663 774/dhcpcd udp 0 0 0.0.0.0:45133 0.0.0.0:* 108 14422 430/avahi-daemon: r udp6 0 0 :::54489 :::* 108 14423 430/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14421 430/avahi-daemon: r udp6 0 0 :::546 :::* 0 13675 774/dhcpcd *** Log File - Last 25 Lines *** 2024-07-19 19:51:34.258 - info: shelly.0 (7112) [CoAP] Device 192.168.178.51 (shellyswitch / shellyswitch-135140 / SHSW-21#135140#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:35.002 - info: shelly.0 (7112) [CoAP] Device 192.168.178.49 (shellyswitch / shellyswitch-134FB4 / SHSW-21#134FB4#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:35.066 - info: shelly.0 (7112) [CoAP] Device 192.168.178.79 (shelly1 / shelly1-500291F06303 / SHSW-1#500291F06303#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:36.289 - info: shelly.0 (7112) [CoAP] Device 192.168.178.33 (shellyswitch / shellyswitch-135173 / SHSW-21#135173#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:36.384 - info: shelly.0 (7112) [CoAP] Device 192.168.178.57 (shellyswitch25 / shellyswitch25-BA7AC4 / SHSW-25#BA7AC4#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:36.843 - info: shelly.0 (7112) [CoAP] Device 192.168.178.95 (shellyswitch25 / shellyswitch25-E098068D2599 / SHSW-25#E098068D2599#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:37.382 - info: shelly.0 (7112) [CoAP] Device 192.168.178.81 (shelly1 / shelly1-F4CFA2764699 / SHSW-1#F4CFA2764699#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:37.396 - info: shelly.0 (7112) [CoAP] Device 192.168.178.55 (shelly1 / shelly1-0597BD / SHSW-1#0597BD#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:38.189 - info: shelly.0 (7112) [CoAP] Device 192.168.178.54 (shelly1 / shelly1-1D92AF / SHSW-1#1D92AF#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:38.696 - info: shelly.0 (7112) [CoAP] Device 192.168.178.65 (shellyswitch25 / shellyswitch25-76C387 / SHSW-25#76C387#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:39.970 - info: shelly.0 (7112) [CoAP] Device 192.168.178.58 (shellyswitch25 / shellyswitch25-BA76C8 / SHSW-25#BA76C8#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:40.553 - info: shelly.0 (7112) [CoAP] Device 192.168.178.92 (shelly1 / shelly1-3083988C032A / SHSW-1#3083988C032A#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:40.557 - info: shelly.0 (7112) [CoAP] Device 192.168.178.77 (shelly1 / shelly1-1D92AC / SHSW-1#1D92AC#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:41.461 - info: shelly.0 (7112) [CoAP] Device 192.168.178.40 (shelly1 / shelly1-1D92BD / SHSW-1#1D92BD#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:41.997 - info: shelly.0 (7112) [CoAP] Device 192.168.178.66 (shellyswitch25 / shellyswitch25-76CFA7 / SHSW-25#76CFA7#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:42.712 - info: sonoff.0 (7113) Client [Stromzähler] connected with secret 1721411502684_8632 2024-07-19 19:51:51.981 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplus1pm-fcb467279060" connected! 2024-07-19 19:51:53.267 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplusplugs-d4d4daebcba4" connected! 2024-07-19 19:52:01.783 - info: shelly.1 (7177) [MQTT] Client Close: (shellyplus1pm / shellyplus1pm-fcb467279060 / shellyplus1pm#fcb467279060#1) (false) 2024-07-19 19:52:03.250 - info: shelly.1 (7177) [MQTT] Client Close: (shellyplusplugs / shellyplusplugs-d4d4daebcba4 / shellyplusplugs#d4d4daebcba4#1) (false) 2024-07-19 19:52:04.869 - error: shelly.1 (7177) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-fcb467279060" 2024-07-19 19:52:05.237 - error: shelly.1 (7177) [MQTT] Unable to get mqttprefix of client with id "shellyplusplugs-d4d4daebcba4" 2024-07-19 19:52:55.695 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplus1pm-fcb467279060" connected! 2024-07-19 19:52:58.529 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplusplugs-d4d4daebcba4" connected! 2024-07-19 19:59:47.641 - info: influxdb.0 (6951) Store 19 buffered influxDB history pointsNochmals Danke!
-
@thomas-braun
Sorry, hab erst mal einen Kaffee zur Entspannung getrunken.Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspibull Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 19:59:36 up 1:20, 3 users, load average: 1.59, 1.72, 1.53 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-07-19 19:59:36 CEST Universal time: Fri 2024-07-19 17:59:36 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth redis gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.0G 535M 1.0M 1.2G 1.8G Swap: 2.0G 0B 2.0G Total: 5.8G 2.0G 2.6G Active iob-Instances: 30 3793 M total memory 2037 M used memory 2141 M active memory 844 M inactive memory 535 M free memory 122 M buffer memory 1098 M swap cache 2027 M total swap 0 M used swap 2027 M free swap *** top - Table Of Processes *** top - 19:59:36 up 1:20, 3 users, load average: 1.59, 1.72, 1.53 Tasks: 196 total, 2 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 8.1 us, 4.1 sy, 0.0 ni, 87.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3793.3 total, 535.2 free, 2037.4 used, 1220.7 buff/cache MiB Swap: 2028.0 total, 2028.0 free, 0.0 used. 1797.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 30G 20G 8.2G 71% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda3 ext4 439G 3.9G 413G 1% /mnt/hukdata /dev/sda1 vfat 256M 32M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jul 19 18:39:23 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:12:1E:93 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=4d904d30-02 rootfstype=ext4 fsck.repair=yes rootwait rootdelay=5 [Fri Jul 19 18:39:31 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jul 19 18:39:31 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Jul 19 18:39:33 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. [Fri Jul 19 18:39:35 2024] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1677960k,nr_inodes=419490,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=776876k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388436k,nr_inodes=97109,mode=700,uid=1000,gid=1000 |-/mnt/hukdata /dev/sda3 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.9G /var/ 3.1G /var/log 3.0G /var/log/journal/1ffd49df1b3a44ffb614b2c58029c285 3.0G /var/log/journal 660M /var/cache Archived and active journals take up 2.9G in the file system. /opt/iobroker/backups: 7.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 871M /opt/iobroker/iobroker-data/ 356M /opt/iobroker/iobroker-data/files 342M /opt/iobroker/iobroker-data/history 138M /opt/iobroker/iobroker-data/files/javascript.admin 129M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 26M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.8947f24d.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_323adb3b74d9eb11b6e6178e6fe9f4d9-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.15.1 /usr/bin/node v20.15.1 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.15.1-1nodesource1 Candidate: 20.15.1-1nodesource1 Version table: *** 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.17.14 javascript: 8.3.1 nodejs modules from github: 1 +-- iobroker.rtspstream@0.0.4 (git+ssh://git@github.com/dbweb-ch/ioBroker.rtspStream.git#adff9611d3ab1871cd94d2e779b9fd4fcc937353) Adapter State system.adapter.adb.0 : adb : raspibull - disabled + system.adapter.admin.0 : admin : raspibull - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspibull - enabled + system.adapter.backitup.0 : backitup : raspibull - enabled system.adapter.broadlink2.0 : broadlink2 : raspibull - disabled + system.adapter.daikin.0 : daikin : raspibull - enabled + system.adapter.daikin.1 : daikin : raspibull - enabled system.adapter.discovery.0 : discovery : raspibull - disabled + system.adapter.doorbird.0 : doorbird : raspibull - enabled + system.adapter.email.0 : email : raspibull - enabled + system.adapter.email.1 : email : raspibull - disabled system.adapter.flot.0 : flot : raspibull - disabled + system.adapter.fritzdect.0 : fritzdect : raspibull - enabled system.adapter.fullybrowser.0 : fullybrowser : raspibull - disabled + system.adapter.history.0 : history : raspibull - enabled + system.adapter.influxdb.0 : influxdb : raspibull - enabled, port: 8086 + system.adapter.iot.0 : iot : raspibull - enabled + system.adapter.iqontrol.0 : iqontrol : raspibull - enabled + system.adapter.javascript.0 : javascript : raspibull - enabled + system.adapter.lgtv.0 : lgtv : raspibull - enabled + system.adapter.mqtt.0 : mqtt : raspibull - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.netatmo.0 : netatmo : raspibull - enabled + system.adapter.nuki-extended.0 : nuki-extended : raspibull - enabled + system.adapter.onkyo.0 : onkyo : raspibull - enabled system.adapter.onvif.0 : onvif : raspibull - disabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.onvif.1 : onvif : raspibull - disabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.ping.0 : ping : raspibull - disabled system.adapter.robonect.0 : robonect : raspibull - disabled + system.adapter.scenes.0 : scenes : raspibull - enabled + system.adapter.shelly.0 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.signal-cmb.0 : signal-cmb : raspibull - enabled + system.adapter.simple-api.0 : simple-api : raspibull - enabled, port: 8087, bind: 192.168.178.78, run as: admin + system.adapter.socketio.0 : socketio : raspibull - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspibull - enabled, port: 1889, bind: 0.0.0.0 system.adapter.telegram.0 : telegram : raspibull - disabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspibull - disabled + system.adapter.tr-064.0 : tr-064 : raspibull - enabled system.adapter.weatherunderground.0 : weatherunderground : raspibull - disabled + system.adapter.web.0 : web : raspibull - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspibull - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspibull - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspibull - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspibull - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspibull - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspibull - enabled, port: 8087, bind: 192.168.178.78, run as: admin + system.adapter.socketio.0 : socketio : raspibull - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspibull - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.web.0 : web : raspibull - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspibull - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "adb" : 0.0.7 , installed 0.0.7 Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "daikin" : 1.4.2 , installed 1.4.2 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "doorbird" : 1.6.0 , installed 1.6.0 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nuki-extended": 2.7.0 , installed 2.7.0 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "robonect" : 1.3.6 , installed 1.3.6 Adapter "scenes" : 3.0.4 , installed 3.0.4 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "signal-cmb" : 0.3.0 , installed 0.3.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 3.3.2 , installed 3.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 11797 States: 8235 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:6 https://repos.influxdata.com/debian stable InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 13736 778/influxd tcp 0 0 192.168.178.78:8087 0.0.0.0:* LISTEN 1001 65522 7315/io.simple-api. tcp 0 0 192.168.178.78:8100 0.0.0.0:* LISTEN 1001 66435 7184/io.doorbird.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14502 555/sshd: /usr/sbin tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 79079 9094/adb tcp 0 0 0.0.0.0:1889 0.0.0.0:* LISTEN 1001 68076 7113/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 67385 7177/io.shelly.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 66341 7080/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 65132 6872/iobroker.js-co tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 110 12228 538/redis-server 12 tcp6 0 0 :::3000 :::* LISTEN 111 13919 1039/grafana tcp6 0 0 :::51989 :::* LISTEN 1001 65452 7094/io.nuki-extend tcp6 0 0 :::22 :::* LISTEN 0 14513 555/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 1980 778/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 67467 7339/io.socketio.0 tcp6 0 0 :::8082 :::* LISTEN 1001 67486 7363/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 65204 6894/io.admin.0 tcp6 0 0 ::1:6379 :::* LISTEN 110 12229 538/redis-server 12 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14420 430/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 67442 7112/io.shelly.0 udp 0 0 0.0.0.0:46765 0.0.0.0:* 1001 88232 7095/io.onkyo.0 udp 0 1536 0.0.0.0:59344 0.0.0.0:* 1001 88278 7095/io.onkyo.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13663 774/dhcpcd udp 0 0 0.0.0.0:45133 0.0.0.0:* 108 14422 430/avahi-daemon: r udp6 0 0 :::54489 :::* 108 14423 430/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14421 430/avahi-daemon: r udp6 0 0 :::546 :::* 0 13675 774/dhcpcd *** Log File - Last 25 Lines *** 2024-07-19 19:51:34.258 - info: shelly.0 (7112) [CoAP] Device 192.168.178.51 (shellyswitch / shellyswitch-135140 / SHSW-21#135140#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:35.002 - info: shelly.0 (7112) [CoAP] Device 192.168.178.49 (shellyswitch / shellyswitch-134FB4 / SHSW-21#134FB4#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:35.066 - info: shelly.0 (7112) [CoAP] Device 192.168.178.79 (shelly1 / shelly1-500291F06303 / SHSW-1#500291F06303#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:36.289 - info: shelly.0 (7112) [CoAP] Device 192.168.178.33 (shellyswitch / shellyswitch-135173 / SHSW-21#135173#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:36.384 - info: shelly.0 (7112) [CoAP] Device 192.168.178.57 (shellyswitch25 / shellyswitch25-BA7AC4 / SHSW-25#BA7AC4#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:36.843 - info: shelly.0 (7112) [CoAP] Device 192.168.178.95 (shellyswitch25 / shellyswitch25-E098068D2599 / SHSW-25#E098068D2599#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:37.382 - info: shelly.0 (7112) [CoAP] Device 192.168.178.81 (shelly1 / shelly1-F4CFA2764699 / SHSW-1#F4CFA2764699#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:37.396 - info: shelly.0 (7112) [CoAP] Device 192.168.178.55 (shelly1 / shelly1-0597BD / SHSW-1#0597BD#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:38.189 - info: shelly.0 (7112) [CoAP] Device 192.168.178.54 (shelly1 / shelly1-1D92AF / SHSW-1#1D92AF#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:38.696 - info: shelly.0 (7112) [CoAP] Device 192.168.178.65 (shellyswitch25 / shellyswitch25-76C387 / SHSW-25#76C387#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:39.970 - info: shelly.0 (7112) [CoAP] Device 192.168.178.58 (shellyswitch25 / shellyswitch25-BA76C8 / SHSW-25#BA76C8#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:40.553 - info: shelly.0 (7112) [CoAP] Device 192.168.178.92 (shelly1 / shelly1-3083988C032A / SHSW-1#3083988C032A#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:40.557 - info: shelly.0 (7112) [CoAP] Device 192.168.178.77 (shelly1 / shelly1-1D92AC / SHSW-1#1D92AC#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:41.461 - info: shelly.0 (7112) [CoAP] Device 192.168.178.40 (shelly1 / shelly1-1D92BD / SHSW-1#1D92BD#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:41.997 - info: shelly.0 (7112) [CoAP] Device 192.168.178.66 (shellyswitch25 / shellyswitch25-76CFA7 / SHSW-25#76CFA7#1) connected! Polltime set to 20 sec. 2024-07-19 19:51:42.712 - info: sonoff.0 (7113) Client [Stromzähler] connected with secret 1721411502684_8632 2024-07-19 19:51:51.981 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplus1pm-fcb467279060" connected! 2024-07-19 19:51:53.267 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplusplugs-d4d4daebcba4" connected! 2024-07-19 19:52:01.783 - info: shelly.1 (7177) [MQTT] Client Close: (shellyplus1pm / shellyplus1pm-fcb467279060 / shellyplus1pm#fcb467279060#1) (false) 2024-07-19 19:52:03.250 - info: shelly.1 (7177) [MQTT] Client Close: (shellyplusplugs / shellyplusplugs-d4d4daebcba4 / shellyplusplugs#d4d4daebcba4#1) (false) 2024-07-19 19:52:04.869 - error: shelly.1 (7177) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-fcb467279060" 2024-07-19 19:52:05.237 - error: shelly.1 (7177) [MQTT] Unable to get mqttprefix of client with id "shellyplusplugs-d4d4daebcba4" 2024-07-19 19:52:55.695 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplus1pm-fcb467279060" connected! 2024-07-19 19:52:58.529 - info: shelly.1 (7177) [MQTT] Device with client id "shellyplusplugs-d4d4daebcba4" connected! 2024-07-19 19:59:47.641 - info: influxdb.0 (6951) Store 19 buffered influxDB history pointsNochmals Danke!
@hukio sagte in iobroker cmd in Konsole geht nicht:
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_323adb3b74d9eb11b6e6178e6fe9f4d9-if00-port0
HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0Das würde ich noch umstellen.
Alles andere schaut soweit gut aus.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden352
Online32.8k
Benutzer82.8k
Themen1.3m
Beiträge