Timeout & "Cannot read repository"
-
@homoran said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
noch eine Frage zwischendurch
bitte erst ein Thema abarbeiten!
Sonst verzettelst du dich noch mehrIch habe mich schon verzettelt, sch.....e!
Ich habe mit dem Backitup Adapter eine sicherung gemacht.
Im Docker sagte er mir das ein Update für den Buanet gibt, naturlich draufgeklickt und durchgeführt.
Jetzt startet der Container für IOB immer neu und IOB läuft natürlich nicht.Protokoll vom Absturz iobroker.html
-
@happyuser20 sagte in Timeout & "Cannot read repository":
Jetzt startet der Container für IOB immer neu und IOB läuft natürlich nicht.
deswegen hab ich vorab gesagt
@homoran sagte in Timeout & "Cannot read repository":
sollte bei richtiger Installation und Konfiguration so sein.
wie das auszusehen hat steht in der Doku.
Da ich mich mit Docket überhaupt nicht auskenne bin ich jetzt hier raus
-
@happyuser20 sagte in Timeout & "Cannot read repository":
Jetzt startet der Container für IOB immer neu und IOB läuft natürlich nicht.
Lt. Protokoll findet er mindestens ein USB-Device nicht. Lösch mal die Umgebungvariable "USBDEVICES" komplett.
-
@marc-berg said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
Jetzt startet der Container für IOB immer neu und IOB läuft natürlich nicht.
Lt. Protokoll findet er mindestens ein USB-Device nicht. Lösch mal die Umgebungvariable "USBDEVICES" komplett.
Meinst du in den Container Einstellungen?
Gruß
HappyUser20 -
@happyuser20 sagte in Timeout & "Cannot read repository":
Meinst du in den Container Einstellungen?
ja, genau. Zumindest den angemeckerten Eintrag
/dev/ttyACM0entfernen.
EDIT: und natürlich auch das folgende Semikolon+Leerzeichen(?)
-
@marc-berg said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
Meinst du in den Container Einstellungen?
ja, genau. Zumindest den angemeckerten Eintrag
/dev/ttyACM0entfernen.
Dank dir, jetzt läuft der IOB wieder.
Jedoch brauche ich den USB anschluss, dort hängt der Lesekopf für den Stromzähler dran.
Wenn ich den Eintrag wieder hinzufüge, gehts wohl nicht mehr?Gruß
HappyUser20 -
@happyuser20 sagte in Timeout & "Cannot read repository":
Wenn ich den Eintrag wieder hinzufüge, gehts wohl nicht mehr?
Offensichtlich gibt es dieses Device nicht, insofern ergibt ein Hinzufügen wenig Sinn. Der Name des Devices hängt davon ab, wie du die Devices (in den Containereinstellungen) gemappt hast. Da ich diese Einstellungen nicht kenne, kann ich dir im Moment nicht weiter helfen.
-
So jetzt bin ich wieder am Start.
nach erneutem "iob diag"======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Hardware Vendor : Synology Kernel : x86_64 Userland : 64 bit Docker : v9.1.2 Virtualization : Docker Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 14:46:24 up 1:24, 0 user, load average: 3.53, 3.23, 3.32 CPU threads: 2 *** Time and Time Zones *** Wed Jun 26 12:46:24 UTC 2024 Wed Jun 26 14:46:24 CEST 2024 CEST +0200 Etc/UTC *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker sudo: unable to resolve host iobroker: Name or service not known HOME=/opt/iobroker sudo: unable to resolve host iobroker: Name or service not known GROUPS=iobroker tty dialout audio video plugdev *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.4G 10G 132M 2.6G 12G Swap: 2.1G 0B 2.1G Total: 18G 4.4G 12G Active iob-Instances: 36 15854 M total memory 4197 M used memory 4455 M active memory 1136 M inactive memory 9601 M free memory 408 M buffer memory 2100 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 14:46:25 up 1:24, 0 user, load average: 3.53, 3.23, 3.32 Tasks: 41 total, 2 running, 39 sleeping, 0 stopped, 0 zombie %Cpu(s): 50.0 us, 0.0 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 15854.1 total, 9602.5 free, 4197.1 used, 2508.7 buff/cache MiB Swap: 2047.9 total, 2047.9 free, 0.0 used. 11657.0 avail Mem *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on none aufs 3.6T 3.0T 639G 83% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup /dev/md2 ext4 3.6T 3.0T 639G 83% /opt/iobroker shm tmpfs 64M 0 64M 0% /dev/shm tmpfs tmpfs 7.8G 0 7.8G 0% /proc/acpi tmpfs tmpfs 7.8G 0 7.8G 0% /proc/scsi tmpfs tmpfs 7.8G 0 7.8G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: sudo: unable to resolve host iobroker: Name or service not known [Wed Jun 26 13:22:57 2024] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem [Wed Jun 26 13:22:58 2024] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [Wed Jun 26 13:22:58 2024] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem [Wed Jun 26 13:22:58 2024] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [Wed Jun 26 13:23:04 2024] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem [Wed Jun 26 13:23:04 2024] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [Wed Jun 26 13:23:05 2024] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem [Wed Jun 26 13:23:05 2024] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [Wed Jun 26 13:23:32 2024] EXT4-fs (md2): barriers disabled [Wed Jun 26 13:23:32 2024] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / none aufs rw,relatime,si=9ec26dfaa10769c0,dio,dirperm1 |-/proc proc proc rw,nosuid,nodev,noexec,relatime | |-/proc/bus proc[/bus] proc ro,nosuid,nodev,noexec,relatime | |-/proc/fs proc[/fs] proc ro,nosuid,nodev,noexec,relatime | |-/proc/irq proc[/irq] proc ro,nosuid,nodev,noexec,relatime | |-/proc/sys proc[/sys] proc ro,nosuid,nodev,noexec,relatime | |-/proc/sysrq-trigger proc[/sysrq-trigger] proc ro,nosuid,nodev,noexec,relatime | |-/proc/acpi tmpfs tmpfs ro,relatime | |-/proc/kcore tmpfs[/null] tmpfs rw,nosuid,size=65536k,mode=755 | |-/proc/keys tmpfs[/null] tmpfs rw,nosuid,size=65536k,mode=755 | |-/proc/timer_list tmpfs[/null] tmpfs rw,nosuid,size=65536k,mode=755 | |-/proc/sched_debug tmpfs[/null] tmpfs rw,nosuid,size=65536k,mode=755 | `-/proc/scsi tmpfs tmpfs ro,relatime |-/dev tmpfs tmpfs rw,nosuid,size=65536k,mode=755 | |-/dev/console devpts[/0] devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=666 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=666 | |-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime | `-/dev/shm shm tmpfs rw,nosuid,nodev,noexec,relatime,size=65536k |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/firmware tmpfs tmpfs ro,relatime | `-/sys/fs/cgroup tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,mode=755 | |-/sys/fs/cgroup/systemd cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd | |-/sys/fs/cgroup/synomonitor cgroup[/system.slice/pkg-ContainerManager-dockerd.service] cgroup rw,nosuid,nodev,noexec,relatime,name=synomonitor | |-/sys/fs/cgroup/cpu cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,cpu | |-/sys/fs/cgroup/cpuset cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,cpuset | |-/sys/fs/cgroup/blkio cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,blkio | |-/sys/fs/cgroup/memory cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,memory | |-/sys/fs/cgroup/devices cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,devices | |-/sys/fs/cgroup/freezer cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,freezer | `-/sys/fs/cgroup/cpuacct cgroup[/docker/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e] cgroup rw,nosuid,nodev,noexec,relatime,cpuacct |-/opt/iobroker /dev/md2[/docker/iobroker_data] ext4 rw,nodev,relatime,synoacl,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group |-/etc/resolv.conf /dev/md2[/@docker/containers/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e/resolv.conf] ext4 rw,nodev,relatime,synoacl,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group |-/etc/hostname /dev/md2[/@docker/containers/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e/hostname] ext4 rw,nodev,relatime,synoacl,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group `-/etc/hosts /dev/md2[/@docker/containers/b34c35f0371e2cf3a1673c0d043f0ae19e5648fa7e8d1a51933c2b0ae0ccf44e/hosts] ext4 rw,nodev,relatime,synoacl,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group Files in neuralgic directories: /var: sudo: unable to resolve host iobroker: Name or service not known 34M /var/ 32M /var/lib 19M /var/lib/apt/lists 19M /var/lib/apt 13M /var/lib/dpkg /opt/iobroker/backups: 402M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 7.9G /opt/iobroker/iobroker-data/ 7.0G /opt/iobroker/iobroker-data/History 635M /opt/iobroker/iobroker-data/files 196M /opt/iobroker/iobroker-data/backup-objects 139M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main amd64 Packages 18.19.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 18.13.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 1001 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.17.14 javascript: 8.3.1 nodejs modules from github: 12 +-- iobroker.apple-find-me@0.0.15 (git+ssh://git@github.com/PfisterDaniel/ioBroker.apple-find-me.git#b7d022dd3412d6945d1a380b53e7c75f10fbecde) +-- iobroker.bambulab@0.3.2 (git+ssh://git@github.com/DrozmotiX/ioBroker.bambulab.git#fd28f98d7ec46f36f4a2dae2d9ac740966453704) +-- iobroker.energiefluss-erweitert@0.4.1 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss-erweitert.git#f724bf54ab9a69bc6d4533b59f560462e1bb2993) +-- iobroker.energiefluss@3.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#e43b4427386d3425f3347c0dfea37331650e72af) +-- iobroker.fronius-solarweb@0.1.0 (git+ssh://git@github.com/TA2k/ioBroker.fronius-solarweb.git#ca2f1a4972992cbd0d14bb25f5f7546219dd5b9e) +-- iobroker.klipper-moonraker@0.0.4 (git+ssh://git@github.com/DrozmotiX/ioBroker.klipper-moonraker.git#3d592b417b27cde2561a470eb7958ee43b6d8a0a) +-- iobroker.linkeddevices@1.5.5 (git+ssh://git@github.com/Scrounger/ioBroker.linkeddevices.git#2fee2ef78373864dc939f4c858dfc6ed49c780f3) +-- iobroker.smartgarden@2.0.0 (git+ssh://git@github.com/jpgorganizer/ioBroker.smartgarden.git#2d972262d6f1dffb2cda512705f7a546359a5e99) +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#b9a3db457ac1a6e1ef4b7ab6edcfddc0388e4b19) +-- iobroker.spritmonitor@0.0.2-beta.10 (git+ssh://git@github.com/ice987987/ioBroker.spritmonitor.git#4059f9e2e3019b0a025fd7af850c259a84a797de) | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) +-- iobroker.vis-materialdesign@0.5.94 (git+ssh://git@github.com/Scrounger/ioBroker.vis-materialdesign.git#8b7529d493f223dfc4f1d1f632553fcb35bbcc92) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.bambulab.0 : bambulab : iobroker - disabled, port: 8883 system.adapter.birthdays.0 : birthdays : iobroker - enabled + system.adapter.daswetter.0 : daswetter : iobroker - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled system.adapter.discovery.0 : discovery : iobroker - disabled + system.adapter.ds18b20.0 : ds18b20 : Slave-Heizraum - enabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: iobroker - disabled + system.adapter.energiefluss.0 : energiefluss : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : iobroker - enabled + system.adapter.fronius.0 : fronius : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hass.0 : hass : iobroker - enabled, port: 8123 + system.adapter.heizoel.0 : heizoel : iobroker - enabled + system.adapter.history.0 : history : iobroker - enabled + system.adapter.hmip.0 : hmip : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled system.adapter.influxdb.0 : influxdb : iobroker - disabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.linkeddevices.0 : linkeddevices : iobroker - disabled system.adapter.mqtt-client.0 : mqtt-client : raspberry_Heizraum_slave - disabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 system.adapter.parcel.0 : parcel : iobroker - disabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled system.adapter.reolink.0 : reolink : iobroker - disabled system.adapter.rpi2.2 : rpi2 : iobroker - disabled system.adapter.sayit.0 : sayit : iobroker - disabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker - enabled system.adapter.smartmeter.1 : smartmeter : iobroker - disabled system.adapter.snmp.0 : snmp : iobroker - disabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : iobroker - enabled + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - disabled system.adapter.text2command.0 : text2command : iobroker - disabled + system.adapter.tr-064.0 : tr-064 : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled system.adapter.trashschedule.1 : trashschedule : iobroker - disabled + system.adapter.upnp.0 : upnp : iobroker - enabled + system.adapter.viessmann.0 : viessmann : Slave-Heizraum - enabled, port: 3002 system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobroker - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-plumb.0 : vis-plumb : iobroker - enabled system.adapter.vis-rgraph.0 : vis-rgraph : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled system.adapter.weatherunderground.0 : weatherunderground : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker - disabled + system.adapter.wled.0 : wled : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hass.0 : hass : iobroker - enabled, port: 8123 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.viessmann.0 : viessmann : Slave-Heizraum - enabled, port: 3002 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json : http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "birthdays" : 3.0.0 , installed 3.0.0 Adapter "coronavirus-statistics": 0.9.0, installed 0.9.0 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "ecovacs-deebot": 1.4.15 , installed 1.4.15 Adapter "energiefluss" : 3.6.0 , installed 3.6.0 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fronius" : 2.1.0 , installed 2.1.0 Adapter "fronius-solarweb": 0.0.3 , installed 0.1.0 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "hass" : 1.4.0 , installed 1.4.0 Adapter "heizoel" : 1.0.3 , installed 1.0.3 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.23.3 , installed 1.23.3 Adapter "i2c" : 1.2.1 , installed 1.2.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "owfs" : 0.7.0 , installed 0.7.0 Adapter "pegelalarm" : 1.3.3 , installed 1.3.3 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "reolink" : 1.1.0 , installed 1.1.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "snmp" : 3.2.0 , installed 3.2.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.2.2 , installed 1.2.2 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 28174 States: 24931 *** OS-Repositories and Updates *** sudo: unable to resolve host iobroker: Name or service not known sudo: unable to resolve host iobroker: Name or service not known Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm-updates InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** sudo: unable to resolve host iobroker: Name or service not known Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8889 0.0.0.0:* LISTEN 0 91165 - tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 617015 451/io.shelly.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1000 612935 380/io.mqtt.0 tcp 0 0 0.0.0.0:8123 0.0.0.0:* LISTEN 0 92164 - tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 0 38451 - tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 0 38443 - tcp 0 0 0.0.0.0:892 0.0.0.0:* LISTEN 0 31746 - tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 45698 - tcp 0 0 127.0.0.1:512 0.0.0.0:* LISTEN 0 99297 - tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN 0 45145 - tcp 0 0 0.0.0.0:161 0.0.0.0:* LISTEN 0 36655 - tcp 0 0 0.0.0.0:3493 0.0.0.0:* LISTEN 0 81441 - tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 603187 139/iobroker.js-con tcp 0 0 0.0.0.0:5000 0.0.0.0:* LISTEN 0 38445 - tcp 0 0 0.0.0.0:5000 0.0.0.0:* LISTEN 0 38437 - tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 602458 139/iobroker.js-con tcp 0 0 0.0.0.0:5001 0.0.0.0:* LISTEN 0 38447 - tcp 0 0 0.0.0.0:5001 0.0.0.0:* LISTEN 0 38439 - tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN 0 85717 - tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 45699 - tcp 0 0 0.0.0.0:9900 0.0.0.0:* LISTEN 0 75491 - tcp 0 0 0.0.0.0:9900 0.0.0.0:* LISTEN 0 75487 - tcp 0 0 0.0.0.0:9901 0.0.0.0:* LISTEN 0 75493 - tcp 0 0 0.0.0.0:9901 0.0.0.0:* LISTEN 0 75489 - tcp 0 0 0.0.0.0:4045 0.0.0.0:* LISTEN 0 45166 - tcp 0 0 0.0.0.0:5357 0.0.0.0:* LISTEN 0 39387 - tcp 0 0 0.0.0.0:5357 0.0.0.0:* LISTEN 0 39385 - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 22420 - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 38449 - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 38441 - tcp 0 0 192.168.1.111:50001 0.0.0.0:* LISTEN 0 76608 - tcp 0 0 0.0.0.0:50002 0.0.0.0:* LISTEN 0 79559 - tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 0 44732 - tcp 0 0 0.0.0.0:662 0.0.0.0:* LISTEN 0 30720 - tcp 0 0 0.0.0.0:7000 0.0.0.0:* LISTEN 0 87367 - tcp 0 0 0.0.0.0:7000 0.0.0.0:* LISTEN 0 87365 - tcp 0 0 127.0.0.1:33304 0.0.0.0:* LISTEN 0 68742 - tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 55 68259 - tcp 0 0 0.0.0.0:88 0.0.0.0:* LISTEN 0 25415 - tcp6 0 0 :::8889 :::* LISTEN 0 91172 - tcp6 0 0 :::43675 :::* LISTEN 0 105052 - tcp6 0 0 :::8123 :::* LISTEN 0 92167 - tcp6 0 0 :::443 :::* LISTEN 0 38452 - tcp6 0 0 :::443 :::* LISTEN 0 38444 - tcp6 0 0 :::892 :::* LISTEN 0 31752 - tcp6 0 0 :::445 :::* LISTEN 0 45696 - tcp6 0 0 :::3261 :::* LISTEN 0 43254 - tcp6 0 0 :::5566 :::* LISTEN 0 68240 - tcp6 0 0 :::3263 :::* LISTEN 0 43252 - tcp6 0 0 :::3264 :::* LISTEN 0 43255 - tcp6 0 0 127.0.0.1:9665 :::* LISTEN 0 82945 - tcp6 0 0 :::3265 :::* LISTEN 0 45646 - tcp6 0 0 :::2049 :::* LISTEN 0 45157 - tcp6 0 0 :::161 :::* LISTEN 0 36656 - tcp6 0 0 ::1:9666 :::* LISTEN 0 105051 - tcp6 0 0 127.0.0.1:9666 :::* LISTEN 0 105050 - tcp6 0 0 :::5000 :::* LISTEN 0 38446 - tcp6 0 0 :::5000 :::* LISTEN 0 38438 - tcp6 0 0 :::5001 :::* LISTEN 0 38448 - tcp6 0 0 :::5001 :::* LISTEN 0 38440 - tcp6 0 0 :::139 :::* LISTEN 0 45697 - tcp6 0 0 :::9900 :::* LISTEN 0 75492 - tcp6 0 0 :::9900 :::* LISTEN 0 75488 - tcp6 0 0 :::9901 :::* LISTEN 0 75494 - tcp6 0 0 :::9901 :::* LISTEN 0 75490 - tcp6 0 0 :::4045 :::* LISTEN 0 45168 - tcp6 0 0 :::5357 :::* LISTEN 0 39388 - tcp6 0 0 :::5357 :::* LISTEN 0 39386 - tcp6 0 0 :::1935 :::* LISTEN 233155 84947 - tcp6 0 0 :::111 :::* LISTEN 0 22423 - tcp6 0 0 :::80 :::* LISTEN 0 38450 - tcp6 0 0 :::80 :::* LISTEN 0 38442 - tcp6 0 0 :::8081 :::* LISTEN 1000 603878 178/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1000 619655 493/io.web.0 tcp6 0 0 :::21 :::* LISTEN 0 44733 - tcp6 0 0 :::8086 :::* LISTEN 1000 104421 - tcp6 0 0 :::662 :::* LISTEN 0 32772 - tcp6 0 0 :::8087 :::* LISTEN 1000 630670 691/io.simple-api.0 tcp6 0 0 :::7000 :::* LISTEN 0 87368 - tcp6 0 0 :::7000 :::* LISTEN 0 87366 - tcp6 0 0 :::88 :::* LISTEN 0 25417 - udp 0 0 0.0.0.0:892 0.0.0.0:* 0 31743 - udp 0 0 0.0.0.0:9997 0.0.0.0:* 0 25154 - udp 0 0 0.0.0.0:9998 0.0.0.0:* 0 25153 - udp 0 0 0.0.0.0:9999 0.0.0.0:* 0 25152 - udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 627066 564/io.upnp.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 627065 564/io.upnp.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 0 76611 - udp 0 0 0.0.0.0:1900 0.0.0.0:* 0 40203 - udp 0 0 0.0.0.0:2049 0.0.0.0:* 0 45156 - udp 0 0 0.0.0.0:60368 0.0.0.0:* 0 167379 - udp 0 0 0.0.0.0:19996 0.0.0.0:* 233155 84715 - udp 0 0 0.0.0.0:19997 0.0.0.0:* 233155 84714 - udp 0 0 0.0.0.0:19998 0.0.0.0:* 233155 84713 - udp 0 0 0.0.0.0:3702 0.0.0.0:* 99 32579 - udp 0 0 0.0.0.0:53015 0.0.0.0:* 0 22419 - udp 0 0 127.0.0.1:53078 0.0.0.0:* 0 76609 - udp 0 0 0.0.0.0:4045 0.0.0.0:* 0 45165 - udp 0 0 0.0.0.0:53358 0.0.0.0:* 0 32032 - udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 623966 680/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 0 32030 - udp 0 0 0.0.0.0:5683 0.0.0.0:* 1000 613809 391/io.shelly.0 udp 0 0 192.168.1.111:55900 0.0.0.0:* 0 76610 - udp 0 0 0.0.0.0:111 0.0.0.0:* 0 22407 - udp 0 0 0.0.0.0:123 0.0.0.0:* 0 32112 - udp 0 0 192.168.1.255:137 0.0.0.0:* 0 167372 - udp 0 0 192.168.1.111:137 0.0.0.0:* 0 167371 - udp 0 0 0.0.0.0:137 0.0.0.0:* 0 167328 - udp 0 0 192.168.1.255:138 0.0.0.0:* 0 167374 - udp 0 0 192.168.1.111:138 0.0.0.0:* 0 167373 - udp 0 0 0.0.0.0:138 0.0.0.0:* 0 167329 - udp 0 0 0.0.0.0:161 0.0.0.0:* 0 36653 - udp 0 0 127.0.0.1:323 0.0.0.0:* 0 32110 - udp 0 0 127.0.0.1:609 0.0.0.0:* 0 30711 - udp 0 0 0.0.0.0:662 0.0.0.0:* 0 30718 - udp6 0 0 :::892 :::* 0 31749 - udp6 0 0 :::58943 :::* 0 32033 - udp6 0 0 :::2049 :::* 0 45158 - udp6 0 0 :::3702 :::* 99 32581 - udp6 0 0 :::4045 :::* 0 45167 - udp6 0 0 :::5353 :::* 0 32031 - udp6 0 0 :::54630 :::* 0 22422 - udp6 0 0 :::111 :::* 0 22421 - udp6 0 0 :::123 :::* 0 32113 - udp6 0 0 :::161 :::* 0 36654 - udp6 0 0 ::1:323 :::* 0 32111 - udp6 0 0 :::662 :::* 0 32770 - *** Log File - Last 25 Lines *** 2024-06-26 14:40:49.046 - info: host.iobroker stopInstance system.adapter.smartmeter.1 send kill signal 2024-06-26 14:40:49.127 - info: smartmeter.1 (2213) terminating 2024-06-26 14:40:49.883 - info: host.iobroker instance system.adapter.smartmeter.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-06-26 14:40:51.374 - info: admin.0 (178) ==> Connected system.user.admin from ::ffff:192.168.1.99 2024-06-26 14:42:11.711 - info: fullybrowser.0 (531) 🗸 192.168.1.16: Command forceSleep successfully set to true 2024-06-26 14:43:04.148 - info: fullybrowser.0 (531) 🗸 192.168.1.66: Command triggerMotion successfully set to true 2024-06-26 14:43:04.169 - info: fullybrowser.0 (531) 🗸 192.168.1.16: Command triggerMotion successfully set to true 2024-06-26 14:43:19.250 - info: simple-api.0 (691) State value to set for "0_userdata.0.Oelstand" has to be type "string" but received type "number" 2024-06-26 14:43:38.656 - info: fullybrowser.0 (531) 🗸 192.168.1.66: Command triggerMotion successfully set to true 2024-06-26 14:43:38.821 - info: fullybrowser.0 (531) 🗸 192.168.1.16: Command triggerMotion successfully set to true 2024-06-26 14:45:00.329 - info: host.iobroker instance system.adapter.dwd.0 started with pid 2963 2024-06-26 14:45:04.375 - info: host.iobroker instance system.adapter.daswetter.0 started with pid 2974 2024-06-26 14:45:11.901 - info: dwd.0 (2963) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.3, js-controller: 5.0.19 2024-06-26 14:45:14.189 - info: dwd.0 (2963) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-06-26 14:45:14.184 - info: daswetter.0 (2974) starting. Version 3.1.15 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.20.3, js-controller: 5.0.19 2024-06-26 14:45:15.013 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-06-26 14:46:14.933 - info: fullybrowser.0 (531) 🗸 192.168.1.66: Command triggerMotion successfully set to true 2024-06-26 14:46:15.157 - info: fullybrowser.0 (531) 🗸 192.168.1.16: Command triggerMotion successfully set to true 2024-06-26 14:47:08.247 - info: fullybrowser.0 (531) 🗸 192.168.1.66: Command triggerMotion successfully set to true 2024-06-26 14:47:08.259 - info: fullybrowser.0 (531) 🗸 192.168.1.16: Command triggerMotion successfully set to true 2024-06-26 14:47:10.615 - info: fullybrowser.0 (531) 🗸 192.168.1.16: Command forceSleep successfully set to true 2024-06-26 14:47:12.485 - info: daswetter.0 (2974) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2024-06-26 14:47:13.521 - info: daswetter.0 (2974) cleaned everything up... 2024-06-26 14:47:13.649 - info: host.iobroker instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-06-26 14:47:13.803 - info: javascript.0 (212) script.js.Wetter: Material Design Widgets: Wetter Skript triggered by 'system.adapter.daswetter.0.alive' ============ Mark until here for C&P ============= iob diag has finished.======================= SUMMARY ======================= v.2024-05-22 model name : Intel(R) Celeron(R) CPU J3355 @ 2.00GHz Kernel : x86_64 Userland : amd64 Docker : v9.1.2 Installation: Docker Kernel: x86_64 Userland: 64 bit Timezone: CEST +0200 User-ID: 0 Display-Server: false Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.0 Recommended versions are nodejs 18.20.3 and npm 10.7.0 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 16G 4.3G 10G 132M 2.6G 12G Swap: 2.1G 0B 2.1G Total: 18G 4.3G 12G Active iob-Instances: 36 Active repo(s): Stable (default) ioBroker Core: js-controller 5.0.19 admin 6.17.14 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 28174 States: 24931 Size of iob-Database: 27M /opt/iobroker/iobroker-data/objects.jsonl 16M /opt/iobroker/iobroker-data/objects.json.migrated 16M /opt/iobroker/iobroker-data/objects.json.bak.migrated 15M /opt/iobroker/iobroker-data/objects.json.broken 14M /opt/iobroker/iobroker-data/objects.jso 23M /opt/iobroker/iobroker-data/states.jsonl 3.3M /opt/iobroker/iobroker-data/states.json.migrated 3.3M /opt/iobroker/iobroker-data/states.json.bak.migrated 2.9M /opt/iobroker/iobroker-data/states.json.old 2.7M /opt/iobroker/iobroker-data/states.JSON =================== END OF SUMMARY ====================Updates will er jetzt keine mehr.
die Auslastung im Docker liegt aber immer zwischen 80 - 120%,Gruß
HappyUser20 -
@happyuser20 sagte in Timeout & "Cannot read repository":
system.adapter.mqtt-client.0 : mqtt-client : raspberry_Heizraum_slave
sieh mal in die Instanzen
-
@happyuser20 sagte in Timeout & "Cannot read repository":
die Auslastung im Docker liegt aber immer zwischen 80 - 120%,
topim iobroker system bitte zeigen! -
@homoran said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
system.adapter.mqtt-client.0 : mqtt-client : raspberry_Heizraum_slave
sieh mal in die Instanzen
Du meinst den hier, den kann ich ja dann löschen, er wäre aber deaktiviert,
-
@homoran said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
die Auslastung im Docker liegt aber immer zwischen 80 - 120%,
topim iobroker system bitte zeigen!Was meinst du genau mit "top"? verstehe ich gerade nicht
-
@happyuser20 sagte in Timeout & "Cannot read repository":
@homoran said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
die Auslastung im Docker liegt aber immer zwischen 80 - 120%,
topim iobroker system bitte zeigen!Was meinst du genau mit "top"? verstehe ich gerade nicht
die Ausgabe des Befels
topzeigen! -
@happyuser20 sagte in Timeout & "Cannot read repository":
Du meinst den hier
jaaaa!
@happyuser20 sagte in Timeout & "Cannot read repository":
den kann ich ja dann löschen
oder einfach einem gültigen Host zuordnen
-
@homoran said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
@homoran said in Timeout & "Cannot read repository":
@happyuser20 sagte in Timeout & "Cannot read repository":
die Auslastung im Docker liegt aber immer zwischen 80 - 120%,
topim iobroker system bitte zeigen!Was meinst du genau mit "top"? verstehe ich gerade nicht
die Ausgabe des Befels
topzeigen!Sorry ich brauch immer etwas länger
-
@happyuser20 nicht schön, aber eine load average von 2.5 ist 7m grünen Bereich
-
@homoran said in Timeout & "Cannot read repository":
@happyuser20 nicht schön, aber eine load average von 2.5 ist 7m grünen Bereich
Ok, Danke an alle für die Unterstützung
