UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[mcm1957]

@piforscher
Hast du ein Multihost system? Wenn ja - admin überall auf 6.13.16 ?

Ansonsten versuch bitte mal ein 'iob upload'.
Aus irgendeinem Grund hat admin im zwieten Fall nicht mitbekommen dass admin aktualisiert wurde.

[piForscher]

@mcm1957 Danke für die schnelle Antwort!
Ja, es ist ein Multihost.
Wie kann ich auf dem Slave die Admin-Version feststellen bzw. updaten ?
'iob upload all' habe ich gemacht...

[mcm1957]

@piforscher said in Test Adapter Fronius 2.0.x:

@mcm1957 Danke für die schnelle Antwort!
Ja, es ist ein Multihost.
Wie kann ich auf dem Slave die Admin-Version feststellen bzw. updaten ?
'iob upload all' habe ich gemacht...

@Thomas-Braun
Bezüglich admin / slave kannst du sicher mehr sagen. Ich hab grad mal 'nen einsamen pi4

[Thomas Braun]

@mcm1957 sagte in Test Adapter Fronius 2.0.x:

Bezüglich admin / slave kannst du sicher mehr sagen. Ich hab grad mal 'nen einsamen pi4

Ich bin auch kein Sklavenhalter...

@piForscher

Bitte mal auf jedem host die Ausgabe von

cd /opt/iobroker && npm ls

anschauen.

[piForscher]

@thomas-braun said in Test Adapter Fronius 2.0.x:

cd /opt/iobroker && npm ls

Tja, das sieht nicht so gut aus...
Master:

cd /opt/iobroker && npm ls
[sudo] password for xx:
npm ERR! code ELSPROBLEMS
npm ERR! extraneous: @types/caseless@0.12.5 /opt/iobroker/node_modules/@types/caseless
npm ERR! extraneous: @types/request@2.48.12 /opt/iobroker/node_modules/@types/request
npm ERR! extraneous: @types/tough-cookie@4.0.5 /opt/iobroker/node_modules/@types/tough-cookie
npm ERR! extraneous: coffeescript@2.7.0 /opt/iobroker/node_modules/coffeescript
npm ERR! invalid: iobroker.awattar@1.0.6 /opt/iobroker/node_modules/iobroker.awattar
npm ERR! invalid: iobroker.slideshow@0.1.4 /opt/iobroker/node_modules/iobroker.slideshow
npm ERR! invalid: iobroker.tuya@3.15.0 /opt/iobroker/node_modules/iobroker.tuya
npm ERR! extraneous: jsonata@2.0.5 /opt/iobroker/node_modules/jsonata
npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect
npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors
npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2
npm ERR! extraneous: typescript@5.3.3 /opt/iobroker/node_modules/typescript
npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc
npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan
iobroker.inst@2.0.3 /opt/iobroker
├── @types/caseless@0.12.5 extraneous
├── @types/request@2.48.12 extraneous
├── @types/tough-cookie@4.0.5 extraneous
├── coffeescript@2.7.0 extraneous
├── colors@1.4.0
├── fs-extra@7.0.1
├── iobroker.admin@6.13.16
├── iobroker.alias-manager@1.2.6
├── iobroker.awattar@1.0.6 invalid: "github:sirjojo69/ioBroker.awattar" from the root project
├── iobroker.backitup@2.11.0
├── iobroker.cleveron@0.1.0
├── iobroker.daswetter@3.1.13
├── iobroker.discovery@4.2.0
├── iobroker.energiefluss@3.6.0
├── iobroker.flot@1.12.0
├── iobroker.followthesun@0.5.0
├── iobroker.fritzbox@0.5.0
├── iobroker.fronius@2.1.0
├── iobroker.fullybrowser@3.0.12
├── iobroker.g-homa@0.5.3
├── iobroker.heatingcontrol@2.12.5
├── iobroker.hm-rega@4.0.0
├── iobroker.hm-rpc@1.16.0
├── iobroker.ical@1.15.0
├── iobroker.icons-mfd-png@1.2.1
├── iobroker.icons-open-icon-library-png@0.1.2
├── iobroker.icons-ultimate-png@1.0.1
├── iobroker.info@2.0.0
├── iobroker.javascript@7.8.0
├── iobroker.js-controller@5.0.19
├── iobroker.linux-control@1.1.5
├── iobroker.meteoalarm@3.0.2
├── iobroker.node-red@5.1.0
├── iobroker.ping@1.6.2
├── iobroker.pvforecast@2.9.1
├── iobroker.rpi2@1.3.2
├── iobroker.sayit@3.0.5
├── iobroker.shelly@6.9.0
├── iobroker.simple-api@2.8.0
├── iobroker.slideshow@0.1.4 invalid: "github:gaudes/ioBroker.slideshow#main" from the root project
├── iobroker.smartmeter@3.3.4
├── iobroker.socketio@6.6.0
├── iobroker.sql@2.2.0
├── iobroker.statistics@2.4.0
├── iobroker.telegram@3.1.0
├── iobroker.tr-064@4.2.18
├── iobroker.trashschedule@3.2.0
├── iobroker.tuya@3.15.0 invalid: "github:Apollon77/ioBroker.tuya" from the root project
├── iobroker.upnp@1.0.21
├── iobroker.viessmannapi@2.4.0
├── iobroker.vis-2-widgets-energy@0.3.9
├── iobroker.vis-bars@0.1.4
├── iobroker.vis-canvas-gauges@1.0.1
├── iobroker.vis-fancyswitch@1.1.0
├── iobroker.vis-history@1.0.0
├── iobroker.vis-hqwidgets@1.4.0
├── iobroker.vis-jqui-mfd@1.0.12
├── iobroker.vis-justgage@2.1.0
├── iobroker.vis-material-webfont@0.0.3
├── iobroker.vis-materialdesign@0.5.9
├── iobroker.vis-metro@1.2.0
├── iobroker.vis-plumb@1.0.2
├── iobroker.vis-rgraph@0.0.2
├── iobroker.vis-timeandweather@1.2.2
├── iobroker.vis-weather@2.5.6
├── iobroker.vis@1.5.4
├── iobroker.weatherunderground@3.6.0
├── iobroker.web@6.2.3
├── iobroker.wifilight@1.1.4
├── iobroker.ws@2.6.1
├── iobroker.yr@5.3.0
├── iobroker@2.0.3
├── jsonata@2.0.5 extraneous
├── node-inspect@2.0.0 extraneous
├── picocolors@1.0.0 extraneous
├── semver@5.7.2
├── suncalc2@1.8.1 extraneous
├── typescript@5.3.3 extraneous
├── virtual-tsc@0.6.2 extraneous
├── wake_on_lan@1.0.0 extraneous
└── yargs@7.1.2


npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-06-21T16_38_27_354Z-debug-0.log

Slave:

 $ cd /opt/iobroker && npm ls
iobroker.inst@3.0.0 /opt/iobroker
├── iobroker.admin@6.13.16
├── iobroker.awattar@1.0.6 (git+ssh://git@github.com/sirjojo69/ioBroker.awattar.git#8af7d95549fd67ea06fcd36a1eb35584d3b05186)
├── iobroker.backitup@2.10.11
├── iobroker.discovery@4.2.0
├── iobroker.followthesun@0.5.0
├── iobroker.fronius@2.1.0
├── iobroker.javascript@7.1.4
├── iobroker.js-controller@5.0.19
├── iobroker.pvforecast@2.9.1
├── iobroker.sayit@3.0.5
├── iobroker.slideshow@0.1.4 (git+ssh://git@github.com/gaudes/ioBroker.slideshow.git#f581e48b8fcef963e9c0048231993128e0fc3526)
├── iobroker.trashschedule@2.2.0
├── iobroker.vis@1.4.16
└── iobroker.web@6.2.3

[Thomas Braun]

@piforscher sagte in Test Adapter Fronius 2.0.x:

Da ist generell der Wurm drin...

Langfassung von

iob diag

(zunächst vom primären Host)

[piForscher]

@thomas-braun

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: kallicube
         Icon name: computer-desktop
           Chassis: desktop
  Operating System: Ubuntu 20.04.6 LTS
            Kernel: Linux 5.4.0-186-generic
      Architecture: x86-64

model name      : Intel(R) Celeron(R) CPU  N3160  @ 1.60GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 18:54:50 up  5:35,  2 users,  load average: 0.89, 1.09, 1.12
CPU threads: 4


*** Time and Time Zones ***
               Local time: Fri 2024-06-21 18:54:50 CEST
           Universal time: Fri 2024-06-21 16:54:50 UTC
                 RTC time: Fri 2024-06-21 16:54:50
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
kalle
HOME=/home/kalle
GROUPS=kalle adm cdrom sudo audio dip plugdev lxd iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        2.7G        757M        0.0K        305M        820M
Swap:          3.8G        1.4G        2.4G
Total:         7.6G        4.1G        3.2G

Active iob-Instances:   18

         3773 M total memory
         2711 M used memory
         2013 M active memory
          708 M inactive memory
          757 M free memory
           46 M buffer memory
          258 M swap cache
         3798 M total swap
         1373 M used swap
         2425 M free swap

*** top - Table Of Processes  ***
top - 18:54:51 up  5:35,  2 users,  load average: 0.89, 1.09, 1.12
Tasks: 182 total,   1 running, 181 sleeping,   0 stopped,   0 zombie
%Cpu(s): 10.7 us,  4.0 sy,  0.0 ni, 85.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3774.0 total,    756.9 free,   2711.7 used,    305.4 buff/cache
MiB Swap:   3799.0 total,   2426.0 free,   1373.0 used.    820.4 avail Mem

*** FAILED SERVICES ***

  UNIT                        LOAD   ACTIVE SUB    DESCRIPTION
* influxdb.service            loaded failed failed InfluxDB is an open-source, distributed, time series database
* snap.docker.dockerd.service loaded failed failed Service for snap application docker.dockerd

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

2 loaded units listed.

*** FILESYSTEM ***
Filesystem                      Type      Size  Used Avail Use% Mounted on
udev                            devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs                           tmpfs     378M  1.4M  377M   1% /run
/dev/sdb2                       ext4       29G   23G  4.3G  85% /
tmpfs                           tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs                           tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs                           tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sdb1                       vfat      511M  6.1M  505M   2% /boot/efi
/dev/loop0                      squashfs  106M  106M     0 100% /snap/core/16574
/dev/loop2                      squashfs   56M   56M     0 100% /snap/core18/2812
/dev/loop3                      squashfs   64M   64M     0 100% /snap/core20/2264
/dev/loop5                      squashfs   56M   56M     0 100% /snap/core18/2823
/dev/loop4                      squashfs   75M   75M     0 100% /snap/core22/1122
/dev/loop1                      squashfs  104M  104M     0 100% /snap/core/16928
/dev/loop6                      squashfs   64M   64M     0 100% /snap/core20/2318
/dev/loop7                      squashfs   75M   75M     0 100% /snap/core22/1380
/dev/loop8                      squashfs  129M  129M     0 100% /snap/docker/2904
/dev/loop9                      squashfs   37M   37M     0 100% /snap/heroku/4092
/dev/loop10                     squashfs  131M  131M     0 100% /snap/docker/2915
/dev/loop11                     squashfs   39M   39M     0 100% /snap/postgresql10/47
/dev/loop12                     squashfs   37M   37M     0 100% /snap/heroku/4087
/dev/loop13                     squashfs   92M   92M     0 100% /snap/lxd/24061
192.168.178.42:/volume1/Diashow nfs4      2.7T  1.6T  1.2T  58% /opt/iobroker/iobroker-data/files/vis/img/bilder_nas
tmpfs                           tmpfs     378M     0  378M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jun 21 13:19:42 2024] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Jun 21 13:19:43 2024] EXT4-fs (sdb2): re-mounted. Opts: (null)

Show mounted filesystems:
TARGET                                                 SOURCE                          FSTYPE      OPTIONS
/                                                      /dev/sdb2                       ext4        rw,relatime
|-/sys                                                 sysfs                           sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                               securityfs                      securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                     tmpfs                           tmpfs       ro,nosuid,nodev,noexec,mode=755
| | |-/sys/fs/cgroup/unified                           cgroup2                         cgroup2     rw,nosuid,nodev,noexec,relatime
| | |-/sys/fs/cgroup/systemd                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,xattr,name=systemd
| | |-/sys/fs/cgroup/cpu,cpuacct                       cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,cpu,cpuacct
| | |-/sys/fs/cgroup/cpuset                            cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,cpuset
| | |-/sys/fs/cgroup/pids                              cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,pids
| | |-/sys/fs/cgroup/blkio                             cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,blkio
| | |-/sys/fs/cgroup/freezer                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,freezer
| | |-/sys/fs/cgroup/devices                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,devices
| | |-/sys/fs/cgroup/hugetlb                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,hugetlb
| | |-/sys/fs/cgroup/perf_event                        cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,perf_event
| | |-/sys/fs/cgroup/net_cls,net_prio                  cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,net_cls,net_prio
| | |-/sys/fs/cgroup/memory                            cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,memory
| | `-/sys/fs/cgroup/rdma                              cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,rdma
| |-/sys/fs/pstore                                     pstore                          pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/firmware/efi/efivars                          efivarfs                        efivarfs    rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                        none                            bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                                  debugfs                         debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing                                tracefs                         tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections                           fusectl                         fusectl     rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config                                 configfs                        configfs    rw,nosuid,nodev,noexec,relatime
|-/proc                                                proc                            proc        rw,nosuid,nodev,noexec,relatime
| `-/proc/sys/fs/binfmt_misc                           systemd-1                       autofs      rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=17334
|   `-/proc/sys/fs/binfmt_misc                         binfmt_misc                     binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                                 udev                            devtmpfs    rw,nosuid,noexec,relatime,size=1885544k,nr_inodes=471386,mode=755
| |-/dev/pts                                           devpts                          devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                           tmpfs                           tmpfs       rw,nosuid,nodev
| |-/dev/hugepages                                     hugetlbfs                       hugetlbfs   rw,relatime,pagesize=2M
| `-/dev/mqueue                                        mqueue                          mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                                 tmpfs                           tmpfs       rw,nosuid,nodev,noexec,relatime,size=386456k,mode=755
| |-/run/lock                                          tmpfs                           tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs                                    sunrpc                          rpc_pipefs  rw,relatime
| |-/run/snapd/ns                                      tmpfs[/snapd/ns]                tmpfs       rw,nosuid,nodev,noexec,relatime,size=386456k,mode=755
| | |-/run/snapd/ns/lxd.mnt                            nsfs[mnt:[4026532450]]          nsfs        rw
| | `-/run/snapd/ns/docker.mnt                         nsfs[mnt:[4026532449]]          nsfs        rw
| `-/run/user/1000                                     tmpfs                           tmpfs       rw,nosuid,nodev,relatime,size=386452k,mode=700,uid=1000,gid=1000
|-/boot/efi                                            /dev/sdb1                       vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
|-/snap/core/16574                                     /dev/loop0                      squashfs    ro,nodev,relatime
|-/snap/core18/2812                                    /dev/loop2                      squashfs    ro,nodev,relatime
|-/snap/core20/2264                                    /dev/loop3                      squashfs    ro,nodev,relatime
|-/snap/core18/2823                                    /dev/loop5                      squashfs    ro,nodev,relatime
|-/snap/core22/1122                                    /dev/loop4                      squashfs    ro,nodev,relatime
|-/snap/core/16928                                     /dev/loop1                      squashfs    ro,nodev,relatime
|-/snap/core20/2318                                    /dev/loop6                      squashfs    ro,nodev,relatime
|-/snap/core22/1380                                    /dev/loop7                      squashfs    ro,nodev,relatime
|-/snap/docker/2904                                    /dev/loop8                      squashfs    ro,nodev,relatime
|-/snap/heroku/4092                                    /dev/loop9                      squashfs    ro,nodev,relatime
|-/snap/docker/2915                                    /dev/loop10                     squashfs    ro,nodev,relatime
|-/snap/postgresql10/47                                /dev/loop11                     squashfs    ro,nodev,relatime
|-/snap/heroku/4087                                    /dev/loop12                     squashfs    ro,nodev,relatime
|-/snap/lxd/24061                                      /dev/loop13                     squashfs    ro,nodev,relatime
|-/var/lib/lxcfs                                       lxcfs                           fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
`-/opt/iobroker/iobroker-data/files/vis/img/bilder_nas 192.168.178.42:/volume1/Diashow nfs4        rw,relatime,vers=4.0,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=192.168.178.64,local_lock=none,addr=192.168.178.42

Files in neuralgic directories:

/var:
3.8G    /var/
1.9G    /var/lib
1.8G    /var/log/journal/715d8eb78de6413b8a3b89c9cd36af8d
1.8G    /var/log/journal
1.8G    /var/log

Archived and active journals take up 1.7G in the file system.

/opt/iobroker/backups:
144M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.4G    /opt/iobroker/iobroker-data/
701M    /opt/iobroker/iobroker-data/backup-objects
537M    /opt/iobroker/iobroker-data/files
187M    /opt/iobroker/iobroker-data/files/vis
146M    /opt/iobroker/iobroker-data/files/vis/img

The five largest files in iobroker-data are:
75M     /opt/iobroker/iobroker-data/backup-objects/2024-06-21_02-30_states.jsonl.gz
70M     /opt/iobroker/iobroker-data/states.jsonl
44M     /opt/iobroker/iobroker-data/objects.jsonl
44M     /opt/iobroker/iobroker-data/backup-objects/2024-06-19_18-30_states.jsonl.gz
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.3-1nodesource1
  Version table:
     18.20.3-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
 *** 18.20.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     10.19.0~dfsg-3ubuntu1.6 500
        500 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages
        500 http://archive.ubuntu.com/ubuntu focal-security/universe amd64 Packages
     10.19.0~dfsg-3ubuntu1 500
        500 http://archive.ubuntu.com/ubuntu focal/universe amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

nodejs modules from github:     1
|   `-- xmlbuilder@0.4.2 invalid: "https://github.com/hobbyquaker/xmlbuilder-js/tarball/29fe5030dc6852007dc8d1bfd5109d75f8da58d5" from node_modules/homematic-xmlrpc

Adapter State
+ system.adapter.admin.0                  : admin                 : kallicube                                -  enabled, port: 8081, bind: 192.168.178.64, run as: admin
  system.adapter.admin.1                  : admin                 : Pi2                                      - disabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : kallicube                                -  enabled
  system.adapter.awattar.0                : awattar               : kallicube                                -  enabled
+ system.adapter.backitup.0               : backitup              : kallicube                                -  enabled
  system.adapter.backitup.2               : backitup              : iobroker-pi                              - disabled
  system.adapter.cleveron.0               : cleveron              : kallicube                                - disabled
  system.adapter.daswetter.0              : daswetter             : kallicube                                -  enabled
  system.adapter.discovery.0              : discovery             : kallicube                                - disabled
  system.adapter.energiefluss.0           : energiefluss          : Pi3                                      - disabled
  system.adapter.flot.0                   : flot                  : kallicube                                -  enabled
  system.adapter.followthesun.1           : followthesun          : kallicube                                - disabled
  system.adapter.fritzbox.0               : fritzbox              : Pi3                                      - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : Pi3                                      - disabled
+ system.adapter.g-homa.0                 : g-homa                : kallicube                                -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : kallicube                                - disabled
+ system.adapter.hm-rega.0                : hm-rega               : kallicube                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : kallicube                                -  enabled, port: 0
  system.adapter.ical.0                   : ical                  : kallicube                                -  enabled
  system.adapter.ical.1                   : ical                  : kallicube                                -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : kallicube                                -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: kallicube                                -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : kallicube                                -  enabled
  system.adapter.info.0                   : info                  : kallicube                                - disabled
+ system.adapter.javascript.0             : javascript            : kallicube                                -  enabled
  system.adapter.javascript.1             : javascript            : iobroker-pi                              - disabled
  system.adapter.linux-control.0          : linux-control         : Pi2                                      - disabled
  system.adapter.meteoalarm.0             : meteoalarm            : kallicube                                - disabled
  system.adapter.node-red.0               : node-red              : kallicube                                - disabled, port: 1880, bind: 192.168.178.64
  system.adapter.ping.0                   : ping                  : Pi3                                      - disabled
+ system.adapter.pvforecast.0             : pvforecast            : kallicube                                -  enabled
  system.adapter.rpi2.1                   : rpi2                  : Pi3                                      - disabled
+ system.adapter.sayit.0                  : sayit                 : kallicube                                -  enabled
+ system.adapter.shelly.0                 : shelly                : kallicube                                -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.slideshow.0              : slideshow             : iobroker-pi                              - disabled
+ system.adapter.slideshow.1              : slideshow             : kallicube                                -  enabled
  system.adapter.smartmeter.0             : smartmeter            : kallicube                                - disabled
+ system.adapter.sql.0                    : sql                   : kallicube                                -  enabled, port: 3307
+ system.adapter.statistics.0             : statistics            : kallicube                                -  enabled
  system.adapter.telegram.0               : telegram              : kallicube                                - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : Pi2                                      - disabled
+ system.adapter.trashschedule.0          : trashschedule         : kallicube                                -  enabled
  system.adapter.upnp.0                   : upnp                  : Pi2                                      - disabled
+ system.adapter.viessmannapi.0           : viessmannapi          : kallicube                                -  enabled
  system.adapter.vis-2-widgets-energy.0   : vis-2-widgets-energy  : kallicube                                -  enabled
  system.adapter.vis-bars.0               : vis-bars              : kallicube                                -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : kallicube                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : kallicube                                -  enabled
  system.adapter.vis-history.0            : vis-history           : kallicube                                -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : kallicube                                -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : kallicube                                -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : kallicube                                -  enabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : kallicube                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : kallicube                                -  enabled
  system.adapter.vis-metro.0              : vis-metro             : kallicube                                -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : kallicube                                -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : kallicube                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : kallicube                                -  enabled
  system.adapter.vis-weather.0            : vis-weather           : kallicube                                -  enabled
  system.adapter.vis.0                    : vis                   : kallicube                                -  enabled
+ system.adapter.web.0                    : web                   : kallicube                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.web.1                    : web                   : iobroker-pi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wifilight.0              : wifilight             : Pi2                                      - disabled
+ system.adapter.ws.0                     : ws                    : kallicube                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.ws.1                     : ws                    : Pi2                                      - disabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : kallicube                                -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : kallicube                                -  enabled, port: 8081, bind: 192.168.178.64, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : kallicube                                -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : kallicube                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : kallicube                                -  enabled, port: 3307
+ system.adapter.web.0                    : web                   : kallicube                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : kallicube                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awattar"      : 1.0.6    , installed 1.0.6
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "cleveron"     : 0.1.0    , installed 0.1.0
Adapter    "daswetter"    : 3.1.15   , installed 3.1.13 [Updatable]
Adapter    "discovery"    : 4.5.0    , installed 4.2.0  [Updatable]
Adapter    "energiefluss" : 3.6.0    , installed 3.6.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "followthesun" : 0.5.0    , installed 0.5.0
Adapter    "fritzbox"     : 0.6.0    , installed 0.5.0  [Updatable]
Adapter    "fronius"      : 2.1.0    , installed 2.1.0
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "g-homa"       : 0.5.3    , installed 0.5.3
Adapter    "heatingcontrol": 2.12.8  , installed 2.12.5 [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.16.0 [Updatable]
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "javascript"   : 8.3.1    , installed 7.8.0  [Updatable]
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "meteoalarm"   : 3.0.2    , installed 3.0.2
Adapter    "node-red"     : 5.2.1    , installed 5.1.0  [Updatable]
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "shelly"       : 7.0.0    , installed 6.9.0  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.3.4  [Updatable]
Adapter    "socketio"     : 6.7.0    , installed 6.6.0  [Updatable]
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "telegram"     : 3.3.2    , installed 3.1.0  [Updatable]
Adapter    "tr-064"       : 4.3.0    , installed 4.2.18 [Updatable]
Adapter    "trashschedule": 3.3.0    , installed 3.2.0  [Updatable]
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "viessmannapi" : 2.3.0    , installed 2.4.0
Adapter    "vis"          : 1.5.6    , installed 1.5.4  [Updatable]
Adapter    "vis-2-widgets-energy": 0.3.11, installed 0.3.9 [Updatable]
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.4.0  [Updatable]
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.0.12 [Updatable]
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.0  [Updatable]
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.9    , installed 2.5.6  [Updatable]
Adapter    "weatherunderground": 3.7.0, installed 3.6.0 [Updatable]
Adapter    "web"          : 6.2.5    , installed 6.2.3  [Updatable]
Adapter    "wifilight"    : 1.2.2    , installed 1.1.4  [Updatable]
Adapter    "ws"           : 2.6.1    , installed 2.6.1
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        34466
States:         29732

*** OS-Repositories and Updates ***
Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:2 http://archive.ubuntu.com/ubuntu focal InRelease
Hit:3 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:5 http://archive.ubuntu.com/ubuntu focal-security InRelease
Reading package lists...
Pending Updates: 10

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          34866      908/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       237164     11197/io.shelly.0
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       236884     11011/iobroker.js-c
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       236877     11011/iobroker.js-c
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          17773      1/init
tcp        0      0 192.168.178.64:2001     0.0.0.0:*               LISTEN      1001       237807     11151/io.hm-rpc.0
tcp        0      0 192.168.178.64:8081     0.0.0.0:*               LISTEN      1001       236225     11090/io.admin.0
tcp        0      0 0.0.0.0:35347           0.0.0.0:*               LISTEN      0          35032      -
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      101        29576      797/systemd-resolve
tcp6       0      0 :::22                   :::*                    LISTEN      0          34868      908/sshd: /usr/sbin
tcp6       0      0 :::46017                :::*                    LISTEN      0          35033      -
tcp6       0      0 :::111                  :::*                    LISTEN      0          12015      1/init
tcp6       0      0 :::50000                :::*                    LISTEN      1001       238839     11257/io.g-homa.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       237152     11204/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       238857     11322/io.ws.0
udp        0      0 0.0.0.0:55916           0.0.0.0:*                           111        30073      813/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           111        30071      813/avahi-daemon: r
udp        0      0 127.0.0.53:53           0.0.0.0:*                           101        29575      797/systemd-resolve
udp        0      0 192.168.178.64:68       0.0.0.0:*                           100        28197      794/systemd-network
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          12012      1/init
udp6       0      0 fe80::4ecc:6aff:fe4:546 :::*                                100        29582      794/systemd-network
udp6       0      0 :::5353                 :::*                                111        30072      813/avahi-daemon: r
udp6       0      0 :::57129                :::*                                111        30074      813/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          17776      1/init

*** Log File - Last 25 Lines ***

2024-06-21 18:41:56.706  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:41:56.712  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:42:57.433  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:42:57.439  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:43:56.653  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:43:56.660  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:44:56.846  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:44:56.853  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:45:56.787  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:45:56.793  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:46:56.852  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:46:56.858  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:47:48.389  - debug: host.kallicube Incoming Host message addNotification
2024-06-21 18:47:50.535  - debug: host.kallicube Incoming Host message getNotifications
2024-06-21 18:47:50.569  - debug: host.kallicube Incoming Host message getNotifications
2024-06-21 18:47:56.699  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:47:56.706  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:48:56.790  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:48:56.799  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:49:56.669  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:49:56.675  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:50:56.845  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:50:56.852  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:55:03.024  - info: host.kallicube instance system.adapter.yr.0 started with pid 12367
2024-06-21 18:55:44.250  - info: host.kallicube instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

[Thomas Braun]

@piforscher sagte in Test Adapter Fronius 2.0.x:

Operating System: Ubuntu 20.04.6 LTS

Langsam mal upgraden. Die Version ist im Auslauf.

Du brauchst keine zwei Admins. Lösch den auf dem Pi2.
(Wie viele hosts laufen denn da durch die Gegend?
kallicube, Pi2, Pi3, iobroker-pi
Leben die alle?)

iob del admin.1

Dann schmeiß alles raus, was nicht benötigt wird.

Pending Updates: 10

System up-to-date bringen. Also Betriebsystem wie den ioBroker.

[piForscher]

@thomas-braun Super, das Löschen von admin.1 hat den Knoten gelöst!
Jetzt konnte ich den Fronius-Adapter wieder zum Laufen bringen.
Dafür schonmal vielen Dank!!

Die anderen Hosts sind von vorigen verzweifelten Versuchen mit abgestürtzten Slave-Images. Wie kann ich die loswerden ?

Und ich nehme die Ermutigung an, mal ein Ubuntu-Update zu wagen

[Thomas Braun]

@piforscher sagte in Test Adapter Fronius 2.0.x:

Super, das Löschen von admin.1 hat den Knoten gelöst!

Da sind halt die Auswirkungen von so einem strubbeligen Setup...

Die anderen Hosts sind von vorigen verzweifelten Versuchen mit abgestürtzten Slave-Images. Wie kann ich die loswerden ?

Siehst du die denn noch im Admin? Muss man sich vermutlich im Einzelnen anschauen wie die da angebunden sind. Offenbar hängen die ja nur noch in einer Angel...

Und ich nehme die Ermutigung an, mal ein Ubuntu-Update zu wagen

Da kommst du eh nicht drum herum.

[mcm1957]

Release 2.1.1 ist ab morgen im LATEST zum Test verfügbar

zu den Releasenotes:
https://github.com/iobroker-community-adapters/ioBroker.fronius#211-2024-07-24

DANKE @nkleber für den Fix betreffend leerer Objekte.

[Martin 5]

Hallo, eine kleine Frage.
Der Fronius-Adapter bezieht die Daten per API-Abfrage als Json-Daten (ist das richtig?). Ich benötige alle 5 Sekunden die aktuell erzeugte und die eingespeiste Leistung.
Kann ich das Abfrageintervall auf 5 Sekunden stellen oder ist es effizienter die zwei Werte direkt per ModbusTCP abzufragen?

Grüße Martin

[mcm1957]

@martin-5
Wenn du schon Zugriff via modbus hast, würde ich diesen Weg vorziehen da

• er lokal ist
• zumindest mir nicht bekannt ist wie oft der Inverter die Daten in der Cloud überhaupt aktualisiert
• ob Fronius eine so häufige Datenabfrage gerne sieht oder überhaupt zulässt und dann ggF mit Sperrmaßnahmen reagiert.

[legro]

@mcm1957

Ich dachte, dass der http-Request ebenfalls lokal vom Wechselrichter beantwortet wird. Liege ich damit (voll) daneben? Jedenfalls enthält doch die API des Wechselrichters eine derartige Möglichkeit.

[mcm1957]

@legro said in Test Adapter Fronius 2.0.x:

@mcm1957

Ich dachte, dass der http-Request ebenfalls lokal vom Wechselrichter beantwortet wird. Liege ich damit (voll) daneben? Jedenfalls enthält doch die API des Wechselrichters eine derartige Möglichkeit.

Du hast vollkommen recht. Ich hatt das anders im Kopf.
Der Adapter benutzt das lokale Api.

In diesem Fall sollten häufige Zugriffe kein Problem sein. Ob in diesem Fall modbus oder http das System mehr belasten kann ich leider nicht sagen.

[topsurfer]

Hallo,
hab den Fronius-Adapter auch installiert, bekomme auch wohl alle Daten.
Danke für den Adapter, hat auf Anhieb funktioniert!

In der App sieht man ja auch "Stromerzeugung heute", "Verbrauch heute" und auch den Autarkiegrad.

In den Datenpunkten (sind ja ca. 100) sehe ich diese Werte so nicht, ist das korrekt?
Muss ich diese Werte selbst errechnen, wenn ja, welche DP nehmt ihr da?

[jmeister79]

@topsurfer
das muss man sich natürlich selber errechnen.

Gibt es adapter für die das automatisch machen oder du bastelst dir n script.
Ist recht simpel.

[Negalein]

@topsurfer sagte in Test Adapter Fronius 2.0.x:

In der App sieht man ja auch "Stromerzeugung heute", "Verbrauch heute" und auch den Autarkiegrad.

das kann glaube ich der fronius-solarweb Adapter

[legro]

@negalein @topsurfer

All dies habe ich in unserer Visualisierung selbst umgesetzt. Meine Absicht: Ich möchte ausschließlich die echten Werte auf der Wechselstromseite haben, denn nur diese finden sich nachher auch in unserem Portemonnaie wieder.

Wer wissen will, wie wir‘s gelöst haben, findet in diesem Thread die Dokumentation.

[klassisch]

Man kann den PV Ertrag auch selbst mit einem Script aus den Stringleistungen integrieren.
Datenpunkte:

fronius.0.site.P_PV
fronius.0.inverter.1.PDC
fronius.0.inverter.1.PDC_2