NEWS
Raspberry Pi4 friert ein
Raspberry Pi4 friert ein
ioBroker Allgemein
32
Posts
10
Posters
2.6k
Views
8
Watching
-
Tut die Kiste aber laut Log.
@thomas-braun
Dann fassen ich kurz zusammen.
Ich habe ein temp Problem, welches ich nur lösen kann, wenn ich einen turmlüfter auf den pi draufbaue. Zweites Problem ist die fehlende Leistung (zu wenig ram).
Einmal blöd gefragt, macht es da noch Sinn, bei einem Raspberry pi4 zu bleiben oder auf den 5er mit aktiver Kühlung zu gehen oder etwas ganz anderes zu nehmen? Wie gesagt, da soll dann noch go2rtc laufen, was ein bisschen Ressourcen hungrig ist. Oder wie seht ihr das? -
Hallo zusammen,
ich habe seit ein paar Wochen das selbe Problem.
Auf meine Frage dazu in der Facebook-Gruppe hat man mir empfohlen von der SD auf SSD umzustellen weil wahrscheinlich die SD defekt wäre.
Dass der Raspi nicht von SSD booten will (Unsupported block sice 4096) ist wohl ein anderes Thema.Die offene Frage von @jwerlsdf ob das Problem mit Vergrößerung des swap nur aufgeschoben ist stellt sich mir auch.
Gibt es dazu eine Lösung?
-
Hallo zusammen,
ich habe seit ein paar Wochen das selbe Problem.
Auf meine Frage dazu in der Facebook-Gruppe hat man mir empfohlen von der SD auf SSD umzustellen weil wahrscheinlich die SD defekt wäre.
Dass der Raspi nicht von SSD booten will (Unsupported block sice 4096) ist wohl ein anderes Thema.Die offene Frage von @jwerlsdf ob das Problem mit Vergrößerung des swap nur aufgeschoben ist stellt sich mir auch.
Gibt es dazu eine Lösung?
-
Hallo zusammen,
ich habe seit ein paar Wochen das selbe Problem.
Auf meine Frage dazu in der Facebook-Gruppe hat man mir empfohlen von der SD auf SSD umzustellen weil wahrscheinlich die SD defekt wäre.
Dass der Raspi nicht von SSD booten will (Unsupported block sice 4096) ist wohl ein anderes Thema.Die offene Frage von @jwerlsdf ob das Problem mit Vergrößerung des swap nur aufgeschoben ist stellt sich mir auch.
Gibt es dazu eine Lösung?
@m4rgott sagte in Raspberry Pi4 friert ein:
Auf meine Frage dazu in der Facebook-Gruppe hat man mir empfohlen von der SD auf SSD umzustellen weil wahrscheinlich die SD defekt wäre.
Das ist leider die pauschale Antwort auf alle Fragen geworden, wenn man nicht weiter weiß... In den seltensten Fällen ist die SD-Karte wirklich defekt.
🧑🎓 Autor des beliebten ioBroker-Master-Kurses
🎥 Tutorials rund um das Thema DIY-Smart-Home: https://haus-automatisierung.com/
📚 Meine inoffizielle ioBroker Dokumentation -
Hi @Ro75 und @haus-automatisierung ,
vielen Dank für die schnelle Antwort.
Wie der Kollege auch schon geschrieben hatte, hängt sich auch bei mir der Raspi 4b (4 GB) inzwischen jeden tag auf. In den Logs vom iob kann ich nicht nachvollziehen woran es liegt und in den Logs vom Raspi kenne ich mich nicht gut genug aus um da etwas nachvollziehen zu können.
Das Problem hatte ich dann auch schonmal in der FB Gruppe "IoBroker SmartHome und IoT" geschildert. Hier kam dann schnell der Hinweis, dass sich häufig die SD Karten verabschieden, weshalb ich ein Backup auf eine Neue SD gezogen habe. Leider hat das nicht geholfen. Nächster Tipp war, dass ich auf eine SSD umsteigen soll. Das ist aber eine Vollkatastrophe. Trotz rpi-eeprom-update bekomm ich das nicht zum laufen und bekomme die Fehlermeldung "Unsupported block sice 4096".
Ich bin jetzt komplett verunsichert. Kann ich den Raspi weiter mit SD betreiben und der Fehler liegt irgendwo anders? Reicht es wenn ich es irgendewie schaffe das auf SSD zum Laufen zu bekommen?
Oder muss ich kurzfristig alles auf einem Mini PC neu aufsetzen?Hier die komplette Ausgabe vom iob diag:
======== Start marking the full check here ========= -- Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 11:27:11 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** Time and Time Zones *** Local time: Mon 2024-06-10 11:27:12 CEST Universal time: Mon 2024-06-10 09:27:12 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 1.5G 0.0K 806M 2.3G Swap: 1.0G 0B 1.0G Total: 4.8G 1.5G 2.5G Active iob-Instances: 26 3794 M total memory 1515 M used memory 1632 M active memory 518 M inactive memory 1471 M free memory 127 M buffer memory 678 M swap cache 1023 M total swap 0 M used swap 1023 M free swap *** top - Table Of Processes *** top - 11:27:12 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 Tasks: 190 total, 2 running, 188 sleeping, 0 stopped, 0 zombie %Cpu(s): 12.9 us, 8.6 sy, 0.0 ni, 78.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 1471.9 free, 1515.8 used, 806.7 buff/cache MiB Swap: 1024.0 total, 1024.0 free, 0.0 used. 2292.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 94G 17% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 884K 759M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot //192.168.188.1/FRITZ.NAS/Intern cifs 1.9T 137G 1.7T 8% /home/iobroker/nas tmpfs tmpfs 380M 0 380M 0% /run/user/1000 tmpfs tmpfs 380M 0 380M 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Mon Jun 10 10:45:22 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:11:73:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=79014aeb-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Jun 10 10:45:23 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Jun 10 10:45:23 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Jun 10 10:45:26 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1001 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1001,gid=1001 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/home/iobroker/nas //192.168.188.1/FRITZ.NAS/Intern cifs rw,nosuid,nodev,noexec,relatime,vers=3.1.1,cache=strict,username=markus,domain=WORKGROUP,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.188.1,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=65536,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=5 Files in neuralgic directories: /var: 6.3G /var/ 3.9G /var/log 3.5G /var/log/journal/c2df7990107f4916961d78d0f5d95a53 3.5G /var/log/journal 750M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 200.0M in the file system. /opt/iobroker/backups: 2.7G /opt/iobroker/backups/ 11M /opt/iobroker/backups/influxDB_2024_05_20-14_17_02_backupiobroker /opt/iobroker/iobroker-data: 611M /opt/iobroker/iobroker-data/ 506M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static 117M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - disabled system.adapter.heos.0 : heos : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 system.adapter.iqontrol.0 : iqontrol : raspberrypi - disabled system.adapter.jarvis.0 : jarvis : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.knx.0 : knx : raspberrypi - enabled, bind: 192.168.188.52 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.modbus.0 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.ring.0 : ring : raspberrypi - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.viessmannapi.0 : viessmannapi : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "heos" : 2.2.1 , installed 2.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "homeconnect" : 1.4.0 , installed 1.4.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "knx" : 2.0.28 , installed 2.0.28 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 3.3.2 , installed 3.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 15614 States: 12683 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18554 1508/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19837 1508/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11886 523/sshd: /usr/sbin tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 19663 1484/master tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 15217 787/influxd tcp6 0 0 :::22 :::* LISTEN 0 11888 523/sshd: /usr/sbin tcp6 0 0 :::25 :::* LISTEN 0 19664 1484/master tcp6 0 0 :::3000 :::* LISTEN 109 16608 1507/grafana tcp6 0 0 :::8081 :::* LISTEN 1001 18249 1542/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 23891 2211/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 18531 787/influxd udp 0 0 192.168.188.52:5353 0.0.0.0:* 1001 20981 2054/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14030 411/avahi-daemon: r udp 0 0 192.168.188.52:50964 0.0.0.0:* 1001 22722 1792/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14971 775/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 19078 1804/io.mihome-vacu udp 0 0 0.0.0.0:41968 0.0.0.0:* 108 14032 411/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14031 411/avahi-daemon: r udp6 0 0 :::546 :::* 0 14982 775/dhcpcd udp6 0 0 :::50062 :::* 108 14033 411/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-10 10:48:09.368 - info: ring.0 (2234) Daily sun parameter calculation scheduled for 00:00:31 2024-06-10 10:48:13.648 - info: sourceanalytix.0 (2148) Initialization of modbus.0.inputRegisters.30513_Sum_Einspeisung_ges successfully 2024-06-10 10:48:13.650 - info: sourceanalytix.0 (2148) Initialising (2 of 5) "smartmeter.0.1-0:1_8_0__255.value" 2024-06-10 10:48:20.519 - info: openweathermap.0 (1831) Terminated (NO_ERROR): Without reason 2024-06-10 10:48:21.256 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2024-06-10 10:48:22.558 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:1_8_0__255.value successfully 2024-06-10 10:48:22.560 - info: sourceanalytix.0 (2148) Initialising (3 of 5) "smartmeter.0.1-0:2_8_0__255.value" 2024-06-10 10:48:25.282 - info: tankerkoenig.0 (2169) Start first request 2024-06-10 10:48:28.475 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:2_8_0__255.value successfully 2024-06-10 10:48:28.483 - info: sourceanalytix.0 (2148) Initialising (4 of 5) "smartmeter.1.1-0:1_8_0__255.value" 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:1_8_0__255.value successfully 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialising (5 of 5) "smartmeter.1.1-0:2_8_0__255.value" 2024-06-10 10:48:36.802 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:2_8_0__255.value successfully 2024-06-10 10:48:36.817 - info: sourceanalytix.0 (2148) Successfully activated SourceAnalytix for 5 of 5 states, will do my Job until you stop me! 2024-06-10 10:48:54.805 - info: alexa2.0 (1697) Unknown Device, but enabling commands, Try it and report back if commands work. 2024-06-10 10:48:54.806 - info: alexa2.0 (1697) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2024-06-10 10:48:54.808 - info: alexa2.0 (1697) Device-type:A3TMFGFCIJD290 - Miriam's JBL LIVE660NC (JBL LIVE660NC) (TUNE_IN,SLEEP,TIMERS_AND_ALARMS,AUDIBLE,VOLUME_SETTING,TIDAL,HANDS_FREE,DEREGISTER_DEVICE,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,PERSISTENT_CONNECTION,ADAPTIVE_LISTENING,MICROPHONE,CHANGE_NAME,SIRIUSXM,I_HEART_RADIO,APPLE_MUSIC,KINDLE_BOOKS,AMAZON_MUSIC,MUSIC_SKILL,DREAM_TRAINING,GOLDFISH,DEEZER,AUDIO_PLAYER) 2024-06-10 10:49:23.128 - info: alexa2.0 (1697) Using cached smart home devices list from Mon Jun 10 2024 10:40:44 GMT+0200 (Mitteleuropäische Sommerzeit) 2024-06-10 10:49:32.719 - info: alexa2.0 (1697) No smart home devices to query 2024-06-10 10:49:39.341 - info: alexa2.0 (1697) Subscribing to states... 2024-06-10 10:49:39.351 - info: alexa2.0 (1697) Deleting the following states: ["Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe","Smart-Home-Devices.3583ea70-fd69-4048-9edd-fac94de2e7b2.door-toggleState","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#delete","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#enabled","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#includeInAllQuery","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#query","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Black Cartridge HP CF400X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Cyan Cartridge HP CF401X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Magenta Cartridge HP CF403X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Yellow Cartridge HP CF402X-level"] 2024-06-10 10:49:41.413 - info: alexa2.0 (1697) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-06-10 10:50:08.922 - info: alexa2.0 (1697) Initialization Done ... 2024-06-10 11:28:01.348 - info: host.raspberrypi instance system.adapter.openweathermap.0 started with pid 3908 2024-06-10 11:28:05.883 - info: openweathermap.0 (3908) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.20.3, js-controller: 5.0.19 -- ============ Mark until here for C&P ============= iob diag has finished.Über alle Tipps bin ich sehr dankbar, da ich den iob inzwischen nicht nur zu Komfortzwecken, sondern auch sicherheitsrelevant im Einsatz habe.
Herzlichen Gruß
m4rgott -
Hi @Ro75 und @haus-automatisierung ,
vielen Dank für die schnelle Antwort.
Wie der Kollege auch schon geschrieben hatte, hängt sich auch bei mir der Raspi 4b (4 GB) inzwischen jeden tag auf. In den Logs vom iob kann ich nicht nachvollziehen woran es liegt und in den Logs vom Raspi kenne ich mich nicht gut genug aus um da etwas nachvollziehen zu können.
Das Problem hatte ich dann auch schonmal in der FB Gruppe "IoBroker SmartHome und IoT" geschildert. Hier kam dann schnell der Hinweis, dass sich häufig die SD Karten verabschieden, weshalb ich ein Backup auf eine Neue SD gezogen habe. Leider hat das nicht geholfen. Nächster Tipp war, dass ich auf eine SSD umsteigen soll. Das ist aber eine Vollkatastrophe. Trotz rpi-eeprom-update bekomm ich das nicht zum laufen und bekomme die Fehlermeldung "Unsupported block sice 4096".
Ich bin jetzt komplett verunsichert. Kann ich den Raspi weiter mit SD betreiben und der Fehler liegt irgendwo anders? Reicht es wenn ich es irgendewie schaffe das auf SSD zum Laufen zu bekommen?
Oder muss ich kurzfristig alles auf einem Mini PC neu aufsetzen?Hier die komplette Ausgabe vom iob diag:
======== Start marking the full check here ========= -- Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 11:27:11 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** Time and Time Zones *** Local time: Mon 2024-06-10 11:27:12 CEST Universal time: Mon 2024-06-10 09:27:12 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 1.5G 0.0K 806M 2.3G Swap: 1.0G 0B 1.0G Total: 4.8G 1.5G 2.5G Active iob-Instances: 26 3794 M total memory 1515 M used memory 1632 M active memory 518 M inactive memory 1471 M free memory 127 M buffer memory 678 M swap cache 1023 M total swap 0 M used swap 1023 M free swap *** top - Table Of Processes *** top - 11:27:12 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 Tasks: 190 total, 2 running, 188 sleeping, 0 stopped, 0 zombie %Cpu(s): 12.9 us, 8.6 sy, 0.0 ni, 78.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 1471.9 free, 1515.8 used, 806.7 buff/cache MiB Swap: 1024.0 total, 1024.0 free, 0.0 used. 2292.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 94G 17% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 884K 759M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot //192.168.188.1/FRITZ.NAS/Intern cifs 1.9T 137G 1.7T 8% /home/iobroker/nas tmpfs tmpfs 380M 0 380M 0% /run/user/1000 tmpfs tmpfs 380M 0 380M 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Mon Jun 10 10:45:22 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:11:73:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=79014aeb-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Jun 10 10:45:23 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Jun 10 10:45:23 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Jun 10 10:45:26 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1001 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1001,gid=1001 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/home/iobroker/nas //192.168.188.1/FRITZ.NAS/Intern cifs rw,nosuid,nodev,noexec,relatime,vers=3.1.1,cache=strict,username=markus,domain=WORKGROUP,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.188.1,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=65536,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=5 Files in neuralgic directories: /var: 6.3G /var/ 3.9G /var/log 3.5G /var/log/journal/c2df7990107f4916961d78d0f5d95a53 3.5G /var/log/journal 750M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 200.0M in the file system. /opt/iobroker/backups: 2.7G /opt/iobroker/backups/ 11M /opt/iobroker/backups/influxDB_2024_05_20-14_17_02_backupiobroker /opt/iobroker/iobroker-data: 611M /opt/iobroker/iobroker-data/ 506M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static 117M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - disabled system.adapter.heos.0 : heos : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 system.adapter.iqontrol.0 : iqontrol : raspberrypi - disabled system.adapter.jarvis.0 : jarvis : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.knx.0 : knx : raspberrypi - enabled, bind: 192.168.188.52 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.modbus.0 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.ring.0 : ring : raspberrypi - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.viessmannapi.0 : viessmannapi : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "heos" : 2.2.1 , installed 2.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "homeconnect" : 1.4.0 , installed 1.4.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "knx" : 2.0.28 , installed 2.0.28 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 3.3.2 , installed 3.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 15614 States: 12683 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18554 1508/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19837 1508/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11886 523/sshd: /usr/sbin tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 19663 1484/master tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 15217 787/influxd tcp6 0 0 :::22 :::* LISTEN 0 11888 523/sshd: /usr/sbin tcp6 0 0 :::25 :::* LISTEN 0 19664 1484/master tcp6 0 0 :::3000 :::* LISTEN 109 16608 1507/grafana tcp6 0 0 :::8081 :::* LISTEN 1001 18249 1542/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 23891 2211/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 18531 787/influxd udp 0 0 192.168.188.52:5353 0.0.0.0:* 1001 20981 2054/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14030 411/avahi-daemon: r udp 0 0 192.168.188.52:50964 0.0.0.0:* 1001 22722 1792/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14971 775/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 19078 1804/io.mihome-vacu udp 0 0 0.0.0.0:41968 0.0.0.0:* 108 14032 411/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14031 411/avahi-daemon: r udp6 0 0 :::546 :::* 0 14982 775/dhcpcd udp6 0 0 :::50062 :::* 108 14033 411/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-10 10:48:09.368 - info: ring.0 (2234) Daily sun parameter calculation scheduled for 00:00:31 2024-06-10 10:48:13.648 - info: sourceanalytix.0 (2148) Initialization of modbus.0.inputRegisters.30513_Sum_Einspeisung_ges successfully 2024-06-10 10:48:13.650 - info: sourceanalytix.0 (2148) Initialising (2 of 5) "smartmeter.0.1-0:1_8_0__255.value" 2024-06-10 10:48:20.519 - info: openweathermap.0 (1831) Terminated (NO_ERROR): Without reason 2024-06-10 10:48:21.256 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2024-06-10 10:48:22.558 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:1_8_0__255.value successfully 2024-06-10 10:48:22.560 - info: sourceanalytix.0 (2148) Initialising (3 of 5) "smartmeter.0.1-0:2_8_0__255.value" 2024-06-10 10:48:25.282 - info: tankerkoenig.0 (2169) Start first request 2024-06-10 10:48:28.475 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:2_8_0__255.value successfully 2024-06-10 10:48:28.483 - info: sourceanalytix.0 (2148) Initialising (4 of 5) "smartmeter.1.1-0:1_8_0__255.value" 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:1_8_0__255.value successfully 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialising (5 of 5) "smartmeter.1.1-0:2_8_0__255.value" 2024-06-10 10:48:36.802 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:2_8_0__255.value successfully 2024-06-10 10:48:36.817 - info: sourceanalytix.0 (2148) Successfully activated SourceAnalytix for 5 of 5 states, will do my Job until you stop me! 2024-06-10 10:48:54.805 - info: alexa2.0 (1697) Unknown Device, but enabling commands, Try it and report back if commands work. 2024-06-10 10:48:54.806 - info: alexa2.0 (1697) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2024-06-10 10:48:54.808 - info: alexa2.0 (1697) Device-type:A3TMFGFCIJD290 - Miriam's JBL LIVE660NC (JBL LIVE660NC) (TUNE_IN,SLEEP,TIMERS_AND_ALARMS,AUDIBLE,VOLUME_SETTING,TIDAL,HANDS_FREE,DEREGISTER_DEVICE,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,PERSISTENT_CONNECTION,ADAPTIVE_LISTENING,MICROPHONE,CHANGE_NAME,SIRIUSXM,I_HEART_RADIO,APPLE_MUSIC,KINDLE_BOOKS,AMAZON_MUSIC,MUSIC_SKILL,DREAM_TRAINING,GOLDFISH,DEEZER,AUDIO_PLAYER) 2024-06-10 10:49:23.128 - info: alexa2.0 (1697) Using cached smart home devices list from Mon Jun 10 2024 10:40:44 GMT+0200 (Mitteleuropäische Sommerzeit) 2024-06-10 10:49:32.719 - info: alexa2.0 (1697) No smart home devices to query 2024-06-10 10:49:39.341 - info: alexa2.0 (1697) Subscribing to states... 2024-06-10 10:49:39.351 - info: alexa2.0 (1697) Deleting the following states: ["Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe","Smart-Home-Devices.3583ea70-fd69-4048-9edd-fac94de2e7b2.door-toggleState","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#delete","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#enabled","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#includeInAllQuery","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#query","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Black Cartridge HP CF400X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Cyan Cartridge HP CF401X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Magenta Cartridge HP CF403X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Yellow Cartridge HP CF402X-level"] 2024-06-10 10:49:41.413 - info: alexa2.0 (1697) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-06-10 10:50:08.922 - info: alexa2.0 (1697) Initialization Done ... 2024-06-10 11:28:01.348 - info: host.raspberrypi instance system.adapter.openweathermap.0 started with pid 3908 2024-06-10 11:28:05.883 - info: openweathermap.0 (3908) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.20.3, js-controller: 5.0.19 -- ============ Mark until here for C&P ============= iob diag has finished.Über alle Tipps bin ich sehr dankbar, da ich den iob inzwischen nicht nur zu Komfortzwecken, sondern auch sicherheitsrelevant im Einsatz habe.
Herzlichen Gruß
m4rgott -
@m4rgott sagte in Raspberry Pi4 friert ein:
Auf meine Frage dazu in der Facebook-Gruppe hat man mir empfohlen von der SD auf SSD umzustellen weil wahrscheinlich die SD defekt wäre.
Das ist leider die pauschale Antwort auf alle Fragen geworden, wenn man nicht weiter weiß... In den seltensten Fällen ist die SD-Karte wirklich defekt.
@haus-automatisierung said in Raspberry Pi4 friert ein:
@m4rgott sagte in Raspberry Pi4 friert ein:
Auf meine Frage dazu in der Facebook-Gruppe hat man mir empfohlen von der SD auf SSD umzustellen weil wahrscheinlich die SD defekt wäre.
Das ist leider die pauschale Antwort auf alle Fragen geworden, wenn man nicht weiter weiß... In den seltensten Fällen ist die SD-Karte wirklich defekt.
Da hier nicht mal das Problem klar dokumentiert wurde ist diese Aussage auch nicht so wirklich hilfreich. Gerade bei SDs gibt es große Qualitätsunterschiede. Und es macht natürlich auch einen Unterschied ob man nur die Logs auf die SD schreibt oder historisierte Daten im Sekundenrythmus bis die SD als Herdplatte dienen kann.
In jedem Fall ist die Aussage dass die SD defekt sein könnte nur mit Infos zum Problem und ggF Systemlogs bewertbar.
-
Hi @Ro75 und @haus-automatisierung ,
vielen Dank für die schnelle Antwort.
Wie der Kollege auch schon geschrieben hatte, hängt sich auch bei mir der Raspi 4b (4 GB) inzwischen jeden tag auf. In den Logs vom iob kann ich nicht nachvollziehen woran es liegt und in den Logs vom Raspi kenne ich mich nicht gut genug aus um da etwas nachvollziehen zu können.
Das Problem hatte ich dann auch schonmal in der FB Gruppe "IoBroker SmartHome und IoT" geschildert. Hier kam dann schnell der Hinweis, dass sich häufig die SD Karten verabschieden, weshalb ich ein Backup auf eine Neue SD gezogen habe. Leider hat das nicht geholfen. Nächster Tipp war, dass ich auf eine SSD umsteigen soll. Das ist aber eine Vollkatastrophe. Trotz rpi-eeprom-update bekomm ich das nicht zum laufen und bekomme die Fehlermeldung "Unsupported block sice 4096".
Ich bin jetzt komplett verunsichert. Kann ich den Raspi weiter mit SD betreiben und der Fehler liegt irgendwo anders? Reicht es wenn ich es irgendewie schaffe das auf SSD zum Laufen zu bekommen?
Oder muss ich kurzfristig alles auf einem Mini PC neu aufsetzen?Hier die komplette Ausgabe vom iob diag:
======== Start marking the full check here ========= -- Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 11:27:11 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** Time and Time Zones *** Local time: Mon 2024-06-10 11:27:12 CEST Universal time: Mon 2024-06-10 09:27:12 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 1.5G 0.0K 806M 2.3G Swap: 1.0G 0B 1.0G Total: 4.8G 1.5G 2.5G Active iob-Instances: 26 3794 M total memory 1515 M used memory 1632 M active memory 518 M inactive memory 1471 M free memory 127 M buffer memory 678 M swap cache 1023 M total swap 0 M used swap 1023 M free swap *** top - Table Of Processes *** top - 11:27:12 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 Tasks: 190 total, 2 running, 188 sleeping, 0 stopped, 0 zombie %Cpu(s): 12.9 us, 8.6 sy, 0.0 ni, 78.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 1471.9 free, 1515.8 used, 806.7 buff/cache MiB Swap: 1024.0 total, 1024.0 free, 0.0 used. 2292.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 94G 17% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 884K 759M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot //192.168.188.1/FRITZ.NAS/Intern cifs 1.9T 137G 1.7T 8% /home/iobroker/nas tmpfs tmpfs 380M 0 380M 0% /run/user/1000 tmpfs tmpfs 380M 0 380M 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Mon Jun 10 10:45:22 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:11:73:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=79014aeb-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Jun 10 10:45:23 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Jun 10 10:45:23 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Jun 10 10:45:26 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1001 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1001,gid=1001 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/home/iobroker/nas //192.168.188.1/FRITZ.NAS/Intern cifs rw,nosuid,nodev,noexec,relatime,vers=3.1.1,cache=strict,username=markus,domain=WORKGROUP,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.188.1,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=65536,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=5 Files in neuralgic directories: /var: 6.3G /var/ 3.9G /var/log 3.5G /var/log/journal/c2df7990107f4916961d78d0f5d95a53 3.5G /var/log/journal 750M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 200.0M in the file system. /opt/iobroker/backups: 2.7G /opt/iobroker/backups/ 11M /opt/iobroker/backups/influxDB_2024_05_20-14_17_02_backupiobroker /opt/iobroker/iobroker-data: 611M /opt/iobroker/iobroker-data/ 506M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static 117M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - disabled system.adapter.heos.0 : heos : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 system.adapter.iqontrol.0 : iqontrol : raspberrypi - disabled system.adapter.jarvis.0 : jarvis : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.knx.0 : knx : raspberrypi - enabled, bind: 192.168.188.52 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.modbus.0 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.ring.0 : ring : raspberrypi - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.viessmannapi.0 : viessmannapi : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "heos" : 2.2.1 , installed 2.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "homeconnect" : 1.4.0 , installed 1.4.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "knx" : 2.0.28 , installed 2.0.28 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 3.3.2 , installed 3.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 15614 States: 12683 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18554 1508/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19837 1508/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11886 523/sshd: /usr/sbin tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 19663 1484/master tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 15217 787/influxd tcp6 0 0 :::22 :::* LISTEN 0 11888 523/sshd: /usr/sbin tcp6 0 0 :::25 :::* LISTEN 0 19664 1484/master tcp6 0 0 :::3000 :::* LISTEN 109 16608 1507/grafana tcp6 0 0 :::8081 :::* LISTEN 1001 18249 1542/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 23891 2211/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 18531 787/influxd udp 0 0 192.168.188.52:5353 0.0.0.0:* 1001 20981 2054/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14030 411/avahi-daemon: r udp 0 0 192.168.188.52:50964 0.0.0.0:* 1001 22722 1792/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14971 775/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 19078 1804/io.mihome-vacu udp 0 0 0.0.0.0:41968 0.0.0.0:* 108 14032 411/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14031 411/avahi-daemon: r udp6 0 0 :::546 :::* 0 14982 775/dhcpcd udp6 0 0 :::50062 :::* 108 14033 411/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-10 10:48:09.368 - info: ring.0 (2234) Daily sun parameter calculation scheduled for 00:00:31 2024-06-10 10:48:13.648 - info: sourceanalytix.0 (2148) Initialization of modbus.0.inputRegisters.30513_Sum_Einspeisung_ges successfully 2024-06-10 10:48:13.650 - info: sourceanalytix.0 (2148) Initialising (2 of 5) "smartmeter.0.1-0:1_8_0__255.value" 2024-06-10 10:48:20.519 - info: openweathermap.0 (1831) Terminated (NO_ERROR): Without reason 2024-06-10 10:48:21.256 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2024-06-10 10:48:22.558 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:1_8_0__255.value successfully 2024-06-10 10:48:22.560 - info: sourceanalytix.0 (2148) Initialising (3 of 5) "smartmeter.0.1-0:2_8_0__255.value" 2024-06-10 10:48:25.282 - info: tankerkoenig.0 (2169) Start first request 2024-06-10 10:48:28.475 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:2_8_0__255.value successfully 2024-06-10 10:48:28.483 - info: sourceanalytix.0 (2148) Initialising (4 of 5) "smartmeter.1.1-0:1_8_0__255.value" 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:1_8_0__255.value successfully 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialising (5 of 5) "smartmeter.1.1-0:2_8_0__255.value" 2024-06-10 10:48:36.802 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:2_8_0__255.value successfully 2024-06-10 10:48:36.817 - info: sourceanalytix.0 (2148) Successfully activated SourceAnalytix for 5 of 5 states, will do my Job until you stop me! 2024-06-10 10:48:54.805 - info: alexa2.0 (1697) Unknown Device, but enabling commands, Try it and report back if commands work. 2024-06-10 10:48:54.806 - info: alexa2.0 (1697) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2024-06-10 10:48:54.808 - info: alexa2.0 (1697) Device-type:A3TMFGFCIJD290 - Miriam's JBL LIVE660NC (JBL LIVE660NC) (TUNE_IN,SLEEP,TIMERS_AND_ALARMS,AUDIBLE,VOLUME_SETTING,TIDAL,HANDS_FREE,DEREGISTER_DEVICE,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,PERSISTENT_CONNECTION,ADAPTIVE_LISTENING,MICROPHONE,CHANGE_NAME,SIRIUSXM,I_HEART_RADIO,APPLE_MUSIC,KINDLE_BOOKS,AMAZON_MUSIC,MUSIC_SKILL,DREAM_TRAINING,GOLDFISH,DEEZER,AUDIO_PLAYER) 2024-06-10 10:49:23.128 - info: alexa2.0 (1697) Using cached smart home devices list from Mon Jun 10 2024 10:40:44 GMT+0200 (Mitteleuropäische Sommerzeit) 2024-06-10 10:49:32.719 - info: alexa2.0 (1697) No smart home devices to query 2024-06-10 10:49:39.341 - info: alexa2.0 (1697) Subscribing to states... 2024-06-10 10:49:39.351 - info: alexa2.0 (1697) Deleting the following states: ["Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe","Smart-Home-Devices.3583ea70-fd69-4048-9edd-fac94de2e7b2.door-toggleState","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#delete","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#enabled","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#includeInAllQuery","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#query","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Black Cartridge HP CF400X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Cyan Cartridge HP CF401X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Magenta Cartridge HP CF403X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Yellow Cartridge HP CF402X-level"] 2024-06-10 10:49:41.413 - info: alexa2.0 (1697) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-06-10 10:50:08.922 - info: alexa2.0 (1697) Initialization Done ... 2024-06-10 11:28:01.348 - info: host.raspberrypi instance system.adapter.openweathermap.0 started with pid 3908 2024-06-10 11:28:05.883 - info: openweathermap.0 (3908) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.20.3, js-controller: 5.0.19 -- ============ Mark until here for C&P ============= iob diag has finished.Über alle Tipps bin ich sehr dankbar, da ich den iob inzwischen nicht nur zu Komfortzwecken, sondern auch sicherheitsrelevant im Einsatz habe.
Herzlichen Gruß
m4rgott@m4rgott sagte in Raspberry Pi4 friert ein:
Ich bin jetzt komplett verunsichert. Kann ich den Raspi weiter mit SD betreiben und der Fehler liegt irgendwo anders? Reicht es wenn ich es irgendewie schaffe das auf SSD zum Laufen zu bekommen?
Oder muss ich kurzfristig alles auf einem Mini PC neu aufsetzen?Keine der Fragen kann man mit den Infos hier wirklich seriös beantworten. Aber ich bin da auch bei @Ro75 :
Previously detected issues: ~ Under-voltage has occurred -
Hi @Ro75 und @haus-automatisierung ,
vielen Dank für die schnelle Antwort.
Wie der Kollege auch schon geschrieben hatte, hängt sich auch bei mir der Raspi 4b (4 GB) inzwischen jeden tag auf. In den Logs vom iob kann ich nicht nachvollziehen woran es liegt und in den Logs vom Raspi kenne ich mich nicht gut genug aus um da etwas nachvollziehen zu können.
Das Problem hatte ich dann auch schonmal in der FB Gruppe "IoBroker SmartHome und IoT" geschildert. Hier kam dann schnell der Hinweis, dass sich häufig die SD Karten verabschieden, weshalb ich ein Backup auf eine Neue SD gezogen habe. Leider hat das nicht geholfen. Nächster Tipp war, dass ich auf eine SSD umsteigen soll. Das ist aber eine Vollkatastrophe. Trotz rpi-eeprom-update bekomm ich das nicht zum laufen und bekomme die Fehlermeldung "Unsupported block sice 4096".
Ich bin jetzt komplett verunsichert. Kann ich den Raspi weiter mit SD betreiben und der Fehler liegt irgendwo anders? Reicht es wenn ich es irgendewie schaffe das auf SSD zum Laufen zu bekommen?
Oder muss ich kurzfristig alles auf einem Mini PC neu aufsetzen?Hier die komplette Ausgabe vom iob diag:
======== Start marking the full check here ========= -- Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 11:27:11 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** Time and Time Zones *** Local time: Mon 2024-06-10 11:27:12 CEST Universal time: Mon 2024-06-10 09:27:12 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 1.5G 0.0K 806M 2.3G Swap: 1.0G 0B 1.0G Total: 4.8G 1.5G 2.5G Active iob-Instances: 26 3794 M total memory 1515 M used memory 1632 M active memory 518 M inactive memory 1471 M free memory 127 M buffer memory 678 M swap cache 1023 M total swap 0 M used swap 1023 M free swap *** top - Table Of Processes *** top - 11:27:12 up 41 min, 2 users, load average: 1.30, 1.23, 1.19 Tasks: 190 total, 2 running, 188 sleeping, 0 stopped, 0 zombie %Cpu(s): 12.9 us, 8.6 sy, 0.0 ni, 78.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 1471.9 free, 1515.8 used, 806.7 buff/cache MiB Swap: 1024.0 total, 1024.0 free, 0.0 used. 2292.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 94G 17% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 884K 759M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot //192.168.188.1/FRITZ.NAS/Intern cifs 1.9T 137G 1.7T 8% /home/iobroker/nas tmpfs tmpfs 380M 0 380M 0% /run/user/1000 tmpfs tmpfs 380M 0 380M 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Mon Jun 10 10:45:22 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:11:73:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=79014aeb-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Jun 10 10:45:23 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Jun 10 10:45:23 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Jun 10 10:45:26 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1678472k,nr_inodes=419618,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/user/1001 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1001,gid=1001 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000 |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/home/iobroker/nas //192.168.188.1/FRITZ.NAS/Intern cifs rw,nosuid,nodev,noexec,relatime,vers=3.1.1,cache=strict,username=markus,domain=WORKGROUP,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.188.1,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=65536,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=5 Files in neuralgic directories: /var: 6.3G /var/ 3.9G /var/log 3.5G /var/log/journal/c2df7990107f4916961d78d0f5d95a53 3.5G /var/log/journal 750M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 200.0M in the file system. /opt/iobroker/backups: 2.7G /opt/iobroker/backups/ 11M /opt/iobroker/backups/influxDB_2024_05_20-14_17_02_backupiobroker /opt/iobroker/iobroker-data: 611M /opt/iobroker/iobroker-data/ 506M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static 117M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - disabled system.adapter.heos.0 : heos : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 system.adapter.iqontrol.0 : iqontrol : raspberrypi - disabled system.adapter.jarvis.0 : jarvis : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.knx.0 : knx : raspberrypi - enabled, bind: 192.168.188.52 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.modbus.0 : modbus : raspberrypi - enabled system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.ring.0 : ring : raspberrypi - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.viessmannapi.0 : viessmannapi : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "energiefluss-erweitert": 0.4.1, installed 0.4.1 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "heos" : 2.2.1 , installed 2.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "homeconnect" : 1.4.0 , installed 1.4.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "knx" : 2.0.28 , installed 2.0.28 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "net-tools" : 1.0.11 , installed 0.2.0 [Updatable] Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 3.3.2 , installed 3.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 15614 States: 12683 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18554 1508/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19837 1508/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11886 523/sshd: /usr/sbin tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 19663 1484/master tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 15217 787/influxd tcp6 0 0 :::22 :::* LISTEN 0 11888 523/sshd: /usr/sbin tcp6 0 0 :::25 :::* LISTEN 0 19664 1484/master tcp6 0 0 :::3000 :::* LISTEN 109 16608 1507/grafana tcp6 0 0 :::8081 :::* LISTEN 1001 18249 1542/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 23891 2211/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 18531 787/influxd udp 0 0 192.168.188.52:5353 0.0.0.0:* 1001 20981 2054/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14030 411/avahi-daemon: r udp 0 0 192.168.188.52:50964 0.0.0.0:* 1001 22722 1792/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14971 775/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 19078 1804/io.mihome-vacu udp 0 0 0.0.0.0:41968 0.0.0.0:* 108 14032 411/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14031 411/avahi-daemon: r udp6 0 0 :::546 :::* 0 14982 775/dhcpcd udp6 0 0 :::50062 :::* 108 14033 411/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-10 10:48:09.368 - info: ring.0 (2234) Daily sun parameter calculation scheduled for 00:00:31 2024-06-10 10:48:13.648 - info: sourceanalytix.0 (2148) Initialization of modbus.0.inputRegisters.30513_Sum_Einspeisung_ges successfully 2024-06-10 10:48:13.650 - info: sourceanalytix.0 (2148) Initialising (2 of 5) "smartmeter.0.1-0:1_8_0__255.value" 2024-06-10 10:48:20.519 - info: openweathermap.0 (1831) Terminated (NO_ERROR): Without reason 2024-06-10 10:48:21.256 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2024-06-10 10:48:22.558 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:1_8_0__255.value successfully 2024-06-10 10:48:22.560 - info: sourceanalytix.0 (2148) Initialising (3 of 5) "smartmeter.0.1-0:2_8_0__255.value" 2024-06-10 10:48:25.282 - info: tankerkoenig.0 (2169) Start first request 2024-06-10 10:48:28.475 - info: sourceanalytix.0 (2148) Initialization of smartmeter.0.1-0:2_8_0__255.value successfully 2024-06-10 10:48:28.483 - info: sourceanalytix.0 (2148) Initialising (4 of 5) "smartmeter.1.1-0:1_8_0__255.value" 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:1_8_0__255.value successfully 2024-06-10 10:48:32.951 - info: sourceanalytix.0 (2148) Initialising (5 of 5) "smartmeter.1.1-0:2_8_0__255.value" 2024-06-10 10:48:36.802 - info: sourceanalytix.0 (2148) Initialization of smartmeter.1.1-0:2_8_0__255.value successfully 2024-06-10 10:48:36.817 - info: sourceanalytix.0 (2148) Successfully activated SourceAnalytix for 5 of 5 states, will do my Job until you stop me! 2024-06-10 10:48:54.805 - info: alexa2.0 (1697) Unknown Device, but enabling commands, Try it and report back if commands work. 2024-06-10 10:48:54.806 - info: alexa2.0 (1697) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2024-06-10 10:48:54.808 - info: alexa2.0 (1697) Device-type:A3TMFGFCIJD290 - Miriam's JBL LIVE660NC (JBL LIVE660NC) (TUNE_IN,SLEEP,TIMERS_AND_ALARMS,AUDIBLE,VOLUME_SETTING,TIDAL,HANDS_FREE,DEREGISTER_DEVICE,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,PERSISTENT_CONNECTION,ADAPTIVE_LISTENING,MICROPHONE,CHANGE_NAME,SIRIUSXM,I_HEART_RADIO,APPLE_MUSIC,KINDLE_BOOKS,AMAZON_MUSIC,MUSIC_SKILL,DREAM_TRAINING,GOLDFISH,DEEZER,AUDIO_PLAYER) 2024-06-10 10:49:23.128 - info: alexa2.0 (1697) Using cached smart home devices list from Mon Jun 10 2024 10:40:44 GMT+0200 (Mitteleuropäische Sommerzeit) 2024-06-10 10:49:32.719 - info: alexa2.0 (1697) No smart home devices to query 2024-06-10 10:49:39.341 - info: alexa2.0 (1697) Subscribing to states... 2024-06-10 10:49:39.351 - info: alexa2.0 (1697) Deleting the following states: ["Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe","Smart-Home-Devices.3583ea70-fd69-4048-9edd-fac94de2e7b2.door-toggleState","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#delete","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#enabled","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#includeInAllQuery","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.#query","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Black Cartridge HP CF400X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Cyan Cartridge HP CF401X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Magenta Cartridge HP CF403X-level","Smart-Home-Devices.82ba897f-a7a6-46fc-9e7c-992e859ccdfe.Yellow Cartridge HP CF402X-level"] 2024-06-10 10:49:41.413 - info: alexa2.0 (1697) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-06-10 10:50:08.922 - info: alexa2.0 (1697) Initialization Done ... 2024-06-10 11:28:01.348 - info: host.raspberrypi instance system.adapter.openweathermap.0 started with pid 3908 2024-06-10 11:28:05.883 - info: openweathermap.0 (3908) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.20.3, js-controller: 5.0.19 -- ============ Mark until here for C&P ============= iob diag has finished.Über alle Tipps bin ich sehr dankbar, da ich den iob inzwischen nicht nur zu Komfortzwecken, sondern auch sicherheitsrelevant im Einsatz habe.
Herzlichen Gruß
m4rgott@m4rgott sagte in Raspberry Pi4 friert ein:
Kernel : aarch64
Userland : 32 bitAlleine deswegen würde ich das schon neu auf einen neuen Datenträger installieren. Dann halt Bookworm / Debian 12 in der 64Bit-Lite-Version.
Mit einem eigenen User ungleich 'iobroker', der dann auch in die Gruppe 'adm' gehört.Zusammen mit einem richtigen Netzteil. Das jetzige ist offenbar zu klein (oder kein Netzteil).
-
Netzteile können auch altern. Ein neues kostet nicht die Welt. Ich würde dann gleich dieses nehmen: https://www.berrybase.de/raspberry-pi-27w-usb-c-power-supply-netzteil-weiss
Dann hast du mehr Reserve und bist für den Pi5 gerüstet. -
Ich klinke mich hier noch einmal ein. Ich habe nun doch auf einen rpi5 mit aktiver kühlung gewechselt. Dabei ohne sd Karte sondern mi ssd Festplatte. Seitdem kein einziger hänger mehr. Es läuft nun wie es soll. Der rp4 hat tatsächlich zu wenig RAM gehabt. Das zeigt mit die aktuelle Leistung. Ich benötige ca 4,5 GB RAM. Temperatur konnte icu mittels turmlüfter auf dem rp5 runter regulieren.
-
Ich klinke mich hier noch einmal ein. Ich habe nun doch auf einen rpi5 mit aktiver kühlung gewechselt. Dabei ohne sd Karte sondern mi ssd Festplatte. Seitdem kein einziger hänger mehr. Es läuft nun wie es soll. Der rp4 hat tatsächlich zu wenig RAM gehabt. Das zeigt mit die aktuelle Leistung. Ich benötige ca 4,5 GB RAM. Temperatur konnte icu mittels turmlüfter auf dem rp5 runter regulieren.
@jwerlsdf sagte in Raspberry Pi4 friert ein:
Ich benötige ca 4,5 GB RAM.
wer sagt das?
ist aber durchaus möglich.
Aber bitte nicht available und free verwechseln.Bei mir sind noch 2.6 von 8 verfügbar.
Wären dann sogar 5.4 GB in Verwendung.
593
Online32.4k
Users81.3k
Topics1.3m
Posts