Keine Updates / Fehlende Adapter Ansicht
-
@samson71 kenne ich nicht - dürfte ich nicht haben (Phiole)...
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
mehr kommt da nicht....
Text aus dem Terminal nicht fotografieren sondern als Text hier rein.
-
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
mehr kommt da nicht....
Text aus dem Terminal nicht fotografieren sondern als Text hier rein.
*** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue pi@raspberrypi:~ $ -
Hmmm? Merkwürdig. An der Stelle sollte die Kiste nicht so aussteigen.
iob stop iob fix iob startdann nochmal
iob diag -
@thomas-braun hatte es nochmal gemacht nun ;
======== Start marking the full check here =========
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 11:10:06 up 5 days, 16:27, 2 users, load average: 1.49, 1.14, 1.19 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-05-22 11:10:06 CEST Universal time: Wed 2024-05-22 09:10:06 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.1G 804M 100M 907M 1.4G Swap: 99M 16M 83M Total: 3.9G 2.1G 887M Active iob-Instances: 31 3838 M total memory 2127 M used memory 429 M active memory 2418 M inactive memory 804 M free memory 266 M buffer memory 641 M swap cache 99 M total swap 16 M used swap 83 M free swap *** top - Table Of Processes *** top - 11:10:06 up 5 days, 16:27, 2 users, load average: 1.49, 1.14, 1.19 Tasks: 170 total, 2 running, 168 sleeping, 0 stopped, 0 zombie %Cpu(s): 7.1 us, 4.3 sy, 0.0 ni, 88.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3838.7 total, 804.0 free, 2126.7 used, 908.1 buff/cache MiB Swap: 100.0 total, 83.2 free, 16.8 used. 1447.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 22G 35G 40% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 16K 1.9G 1% /dev/shm tmpfs tmpfs 1.9G 113M 1.8G 6% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu May 16 18:42:37 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:B2:75:50 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=98ea7740-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu May 16 18:42:38 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Thu May 16 18:42:38 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Thu May 16 18:42:39 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Thu May 16 18:42:39 2024] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted [Thu May 16 18:42:39 2024] EXT4-fs (mmcblk0p2): recovery complete [Thu May 16 18:42:39 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Thu May 16 18:42:39 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Thu May 16 18:42:41 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1800568k,nr_inodes=84157,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,relatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup tmpfs tmpfs ro,nosuid,nodev,noexec,mode=755 | | |-/sys/fs/cgroup/unified cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate | | |-/sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd | | |-/sys/fs/cgroup/pids cgroup cgroup rw,nosuid,nodev,noexec,relatime,pids | | |-/sys/fs/cgroup/net_cls,net_prio cgroup cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio | | |-/sys/fs/cgroup/cpu,cpuacct cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct | | |-/sys/fs/cgroup/perf_event cgroup cgroup rw,nosuid,nodev,noexec,relatime,perf_event | | |-/sys/fs/cgroup/blkio cgroup cgroup rw,nosuid,nodev,noexec,relatime,blkio | | |-/sys/fs/cgroup/freezer cgroup cgroup rw,nosuid,nodev,noexec,relatime,freezer | | |-/sys/fs/cgroup/cpuset cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpuset | | `-/sys/fs/cgroup/devices cgroup cgroup rw,nosuid,nodev,noexec,relatime,devices | |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,relatime | `-/sys/kernel/config configfs configfs rw,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=40,pgrp=1,timeout=0,minproto=5,maxproto=5,direct | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=393084k,mode=700,uid=1000,gid=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 2.2G /var/cache 2.1G /var/cache/apt/archives 2.1G /var/cache/apt 144M /var/lib Archived and active journals take up 112.0M in the file system. /opt/iobroker/backups: 365M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 823M /opt/iobroker/iobroker-data/ 607M /opt/iobroker/iobroker-data/files 179M /opt/iobroker/iobroker-data/files/vis-2 119M /opt/iobroker/iobroker-data/backup-objects 81M /opt/iobroker/iobroker-data/files/vis-2/static The five largest files in iobroker-data are: 44M /opt/iobroker/iobroker-data/states.jsonl 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 33M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2153973-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.13.16 javascript: 7.8.0 nodejs modules from github: 3 | +-- onvif@0.7.0 (git+ssh://git@github.com/agsh/onvif.git#74c21e63f4f8c3db19c5e529842af361050138cf) +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#9c4635239c7b9321601dcf0fcdd8677a55a8b13f) `-- iobroker.zendure-solarflow@1.6.1 (git+ssh://git@github.com/nograx/ioBroker.zendure-solarflow.git#b56b690481e55f1b06d4a8d6e76895221748ffd6) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.3 : cloud : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 system.adapter.devices.0 : devices : raspberrypi - enabled system.adapter.deyeidc.0 : deyeidc : raspberrypi - disabled, port: 8899 + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.email.1 : email : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - enabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - enabled system.adapter.vis-history.0 : vis-history : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zendure-solarflow.0 : zendure-solarflow : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories List is empty Installed ioBroker-Instances Error: Object "system.repositories" not found Objects and States Please stand by - This may take a while Objects: 42450 States: 39349 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 17 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 18402 446/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19469 573/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 58848278 29012/cupsd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 37829 3693/io.shelly.0 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 21145 446/deCONZ tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 21688 361/python tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 45449775 7774/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 45449776 7774/io.mqtt.0 tcp 0 0 0.0.0.0:7999 0.0.0.0:* LISTEN 0 21569 680/motion tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 22131 542/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19829 542/iobroker.js-con tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 20936 569/vncserver-x11-c tcp 0 0 0.0.0.0:8079 0.0.0.0:* LISTEN 0 21568 680/motion tcp6 0 0 :::8081 :::* LISTEN 1001 31101 2401/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 37617 4792/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 19471 573/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 58848277 29012/cupsd tcp6 0 0 :::8087 :::* LISTEN 1001 37632 5152/io.simple-api. tcp6 0 0 :::8095 :::* LISTEN 1001 45275461 18028/io.onvif.0 tcp6 0 0 :::5900 :::* LISTEN 0 20935 569/vncserver-x11-c udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 37849 4131/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 37850 4131/io.tuya.0 udp 0 0 0.0.0.0:34848 0.0.0.0:* 108 16976 357/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 19657 476/dhcpcd udp 0 0 0.0.0.0:49759 0.0.0.0:* 1001 1193620 10941/io.broadlink2 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 58847555 29014/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 1193591 10941/io.broadlink2 udp 0 0 0.0.0.0:53918 0.0.0.0:* 1001 1195574 10941/io.broadlink2 udp 0 0 192.168.178.119:5353 0.0.0.0:* 1001 35325 3191/io.tr-064.0 udp 0 0 192.168.178.118:5353 0.0.0.0:* 1001 35324 3191/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16974 357/avahi-daemon: r udp 0 0 0.0.0.0:48885 0.0.0.0:* 1001 57894443 10941/io.broadlink2 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 38776 5844/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 38773 5844/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 21352 446/deCONZ udp6 0 0 :::52730 :::* 108 16977 357/avahi-daemon: r udp6 0 0 :::546 :::* 0 27481 476/dhcpcd udp6 0 0 :::5353 :::* 108 16975 357/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 38778 5844/io.deconz.0 udp6 0 0 :::1900 :::* 1001 38777 5844/io.deconz.0 udp6 0 0 :::1900 :::* 1001 38775 5844/io.deconz.0 udp6 0 0 :::1900 :::* 1001 38774 5844/io.deconz.0 *** Log File - Last 25 Lines *** 2024-05-22 11:10:54.599 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 32.821undefined 2024-05-22 11:10:55.876 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 39.769undefined 2024-05-22 11:10:59.062 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 31.324undefined 2024-05-22 11:11:02.596 - warn: tuya.0 (4131) bf06b08cba98cae305vmq9.1: A set command is already in progress. Can not issue a second one that also should return a response.. Try to use cloud. 2024-05-22 11:11:02.609 - warn: tuya.0 (4131) bf06b08cba98cae305vmq9.1: A set command is already in progress. Can not issue a second one that also should return a response.. Try to use cloud. 2024-05-22 11:11:02.619 - warn: tuya.0 (4131) bf06b08cba98cae305vmq9.1: A set command is already in progress. Can not issue a second one that also should return a response.. Try to use cloud. 2024-05-22 11:11:02.757 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 27.724undefined 2024-05-22 11:11:03.006 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 24.258undefined 2024-05-22 11:11:03.062 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 210.72undefined 2024-05-22 11:11:03.877 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 21.415undefined 2024-05-22 11:11:05.843 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 24.157undefined 2024-05-22 11:11:06.892 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 22.828undefined 2024-05-22 11:11:08.339 - info: web.0 (4792) <== Disconnect system.user.admin from ::ffff:192.168.178.133 flot 2024-05-22 11:11:08.381 - info: web.0 (4792) <== Disconnect system.user.admin from ::ffff:192.168.178.133 flot 2024-05-22 11:11:08.647 - info: web.0 (4792) ==> Connected system.user.admin from ::ffff:192.168.178.133 2024-05-22 11:11:08.773 - info: web.0 (4792) ==> Connected system.user.admin from ::ffff:192.168.178.133 2024-05-22 11:11:10.840 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 21.651undefined 2024-05-22 11:11:11.839 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 53.025undefined 2024-05-22 11:11:12.840 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 21.112undefined 2024-05-22 11:11:14.910 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 29.103undefined 2024-05-22 11:11:17.855 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 25.84undefined 2024-05-22 11:11:19.844 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 50.518undefined 2024-05-22 11:11:20.876 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 32.283undefined 2024-05-22 11:11:23.857 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 56.524undefined 2024-05-22 11:11:24.845 - info: javascript.0 (2453) script.js.Manni_Schalter.Aussen.Teichfilter-Sommer: 27.959undefined============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
buster
Brauch ich gar nicht weiterlesen.
Bring das ganze Spiel auf ein aktuelles 64Bit-Release von 'Bookworm'.
Geht nur per NEUINSTALLATION. -
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
buster
Brauch ich gar nicht weiterlesen.
Bring das ganze Spiel auf ein aktuelles 64Bit-Release von 'Bookworm'.
Geht nur per NEUINSTALLATION.arh neh ......
-
iobBroker in Gänze auf einen aktuellen Stand bringen, Backup ziehen und damit auf das frische System umziehen.
Und geh mit dem System dann besser um:
[Thu May 16 18:42:39 2024] EXT4-fs (mmcblk0p2): 4 orphan inodes deletedDa gibt es Einschläge im Dateisystem. NIE einfach im laufenden Betrieb den Stecker ziehen.
Dann auch gleich OHNE Desktop installieren. -
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
iobBroker in Gänze auf einen aktuellen Stand bringen, Backup ziehen und damit auf das frische System umziehen.
Und geh mit dem System dann besser um:
[Thu May 16 18:42:39 2024] EXT4-fs (mmcblk0p2): 4 orphan inodes deletedDa gibt es Einschläge im Dateisystem. NIE einfach im laufenden Betrieb den Stecker ziehen.
Dann auch gleich OHNE Desktop installieren.Danke für deine Hilfe @Thomas-Braun .
Da war dann sicher die Sicherung mal raus
Werde deinen Rat aber beherzigen
Habe hier noch ein gleichen Raspi 4 zur VIS Darstellung. Muss mal schauen wie ich den am besten neu aufsetzten kann... -
@yoda
Ohne repositories geht mal sicher kein UpdateInstalled ioBroker-Instances Error: Object "system.repositories" not foundVerscuch mal die Repos zu resetten (Button mit Pfeil gegen Uhrzeigersinn):
Und dem Updatebedarf stimme ich zu - nicht dass da ein falscher Eindruck entsteht!
-
@mcm1957 Danke - ich habs dort mal auf Beta und dann auch wieder auf stable eingetragen.
Leider keine Veränderung- Danke für den Lösungsansatz.
Komisch ... wen ich nun wieder reingehe sehe ich keinen Eintrag vom Link - alles leer...
-
Kein Wunder. Denn:
ioBroker-Repositories List is empty Installed ioBroker-Instances Error: Object "system.repositories" not foundVielleicht waren die in den
4 orphan inodes deleted
drin. -
@yoda
Ev schau mal in dem Topic:
https://forum.iobroker.net/topic/58458/nur-installierte-adapter-werden-angezeigt-bei-adapter/17?_=1716388632796Kern
iob setup firstIn jedem Fall stell vor irgendwelchen weiteren Versuchen sicher, dass du ein funktionierende BACKUP hast.
-
@mcm1957 denke leider ich muss das System wirklich neu machen.
Plane meinen 2 Raspi mal dafür ein - wenn ich den dann am laufen habe.
Setzte ich den Raspi 1 ( Aktuell Iobroker) auch neu auf. Der ist dann mit Browser, rein für für die Vis Darstellung.Wie mache ich das am Besten?
Raspi Nr.2 neu aufsetzten ohne Browser - Backup einspielen.
Nun würde ich gern zum Abgleich den jetzigen Raspi Nr.1 Deaktivieren, aber noch die Möglichkeit haben mögliche Adapter Einstellungen abzugleichen. Wenn ich ich nun den Admin stoppe, sehe ich vermutlich auch nichts mehr oder? -
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
denke leider ich muss das System wirklich neu machen.
Das sowieso. Ein 32Bit-Buster ist halt eh schon geraume Zeit verstorben.
Neu aufsetzen, iobroker 'leer' installieren, vorhandenes Backup wieder einspielen, fertig. Dauert 'ne Stunde, je nach Umfang der Installation.
-
@thomas-braun habe nun einen neuen Raspi mit Iobroker.
Ich suche grade verzweifelt nach der Möglichkeit ein Backup einzuspielen.
Eines erstellen klappt - aber ich finde den Button zur Wiederherstellung nicht
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
aber ich finde den Button zur Wiederherstellung nicht
sieh mal in die Sidebar
-
@homoran oh man ich habes - wird langsam zu spät
-
@thomas-braun @thomas-braun ich habe das System nun neu gemacht, alles schick auch mit den Bildern Lokal speichern.
Meine Daten sehen nun wie unten aus.Nur der simple-api bekomme ch nicht am laufen, kann aber jetzt auch nicht sagen das ich Negative Auswirkungen deswegen sehe.
Habt ihr da noch einen Tip für michsimple-api.0 2024-05-24 13:43:27.478 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason simple-api.0 2024-05-24 13:43:27.473 error Cannot create webserver: TypeError: Cannot read properties of undefined (reading 'createServerAsync') simple-api.0 2024-05-24 13:43:27.438 info starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.20.3, js-controller: 5.0.19======== Start marking the full check here =========
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.28+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:36:50 up 9 min, 4 users, load average: 1.72, 2.13, 1.42 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-05-24 13:36:50 CEST Universal time: Fri 2024-05-24 11:36:50 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render ne tdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 594M 17M 1.0G 1.5G Swap: 104M 0B 104M Total: 4.1G 2.4G 699M Active iob-Instances: 26 3792 M total memory 2330 M used memory 2483 M active memory 577 M inactive memory 567 M free memory 52 M buffer memory 934 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 13:36:50 up 9 min, 4 users, load average: 1.72, 2.13, 1.42 Tasks: 241 total, 1 running, 240 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 14.3 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 565.4 free, 2331.7 used, 987.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1460.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/mmcblk0p2 ext4 58G 11G 45G 20% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 75M 436M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 24 13:26:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:41:85:01 vc_mem. mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty 1 root=PARTUUID=9aa16d6b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splas h plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Fri May 24 13:27:01 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967 -4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [Fri May 24 13:27:03 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1 f5-1b5927e6c5f9 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityf s rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino= 5492 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_mi sc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1668360k,nr_inodes=417090,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipef s rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,g id=1000 | |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfs d-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1000/doc portal fuse.port al rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname= mixed,errors=remount-ro Files in neuralgic directories: /var: 923M /var/ 536M /var/cache 529M /var/cache/apt 416M /var/cache/apt/archives 197M /var/lib Archived and active journals take up 87.9M in the file system. /opt/iobroker/backups: 728M /opt/iobroker/backups/ 1.5M /opt/iobroker/backups/Neuer Ordner /opt/iobroker/iobroker-data: 776M /opt/iobroker/iobroker-data/ 638M /opt/iobroker/iobroker-data/files 179M /opt/iobroker/iobroker-data/files/vis-2 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.3d563dc9.js.m ap 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56. js.map 31M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.m ap USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please alw ays prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 P ackages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 2 +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/iobroker-community- adapters/ioBroker.sourceanalytix.git#9c4635239c7b9321601dcf0fcdd8677a55a8b13f) `-- iobroker.zendure-solarflow@1.6.1 (git+ssh://git@github.com/nograx/ioBroker.z endure-solarflow.git#b56b690481e55f1b06d4a8d6e76895221748ffd6) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.3 : cloud : raspberrypi - enabled system.adapter.deconz.0 : deconz : raspberrypi - disabled, port: 80 system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.deyeidc.0 : deyeidc : raspberrypi - disabled, port: 8899 + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.email.1 : email : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.info.0 : info : raspberrypi - disabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.lgtv.0 : lgtv : raspberrypi - disabled system.adapter.mobile.0 : mobile : raspberrypi - disabled system.adapter.mqtt.0 : mqtt : raspberrypi - disabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admi n system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-history.0 : vis-history : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admi n + system.adapter.zendure-solarflow.0 : zendure-solarflow : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admi n + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admi n ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.2.0 , installed 2.2.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "deyeidc" : 0.0.14 , installed 0.0.14 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "email" : 1.3.0 , installed 1.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.2.2 , installed 3.2.2 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-energy": 0.3.11, installed 0.3.11 Adapter "vis-2-widgets-gauges": 1.0.3, installed 1.0.3 Adapter "vis-2-widgets-material": 1.3.25, installed 1.3.25 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zendure-solarflow": 1.5.3, installed 1.6.1 Objects and States Please stand by - This may take a while Objects: 42481 States: 39476 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9671 787/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 6985 787/iobroker.js-con tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7465 786/cupsd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 12866 2208/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8224 837/sshd: /usr/sbin tcp6 0 0 :::5900 :::* LISTEN 992 7769 821/wayvnc tcp6 0 0 :::8095 :::* LISTEN 1001 12824 2285/io.onvif.0 tcp6 0 0 :::8081 :::* LISTEN 1001 10222 1664/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 10818 2410/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 8235 837/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 7464 786/cupsd udp 0 0 192.168.178.133:5353 0.0.0.0:* 1001 10683 2209/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7304 552/avahi-daemon: r udp 0 0 0.0.0.0:38821 0.0.0.0:* 1001 10532 2144/io.broadlink2. udp 0 0 0.0.0.0:59590 0.0.0.0:* 1001 10531 2144/io.broadlink2. udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 13584 2222/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 13585 2222/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 9154 1442/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12050 2144/io.broadlink2. udp 0 0 0.0.0.0:53927 0.0.0.0:* 104 7306 552/avahi-daemon: r udp 0 0 0.0.0.0:60083 0.0.0.0:* 1001 12648 2144/io.broadlink2. udp6 0 0 :::5353 :::* 104 7305 552/avahi-daemon: r udp6 0 0 :::37124 :::* 104 7307 552/avahi-daemon: r udp6 0 0 fe80::d68f:e843:de6:546 :::* 0 8144 678/NetworkManager *** Log File - Last 25 Lines *** 2024-05-24 13:37:24.024 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 20.81undefined 2024-05-24 13:37:27.280 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.273undefined 2024-05-24 13:37:27.393 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.563undefined 2024-05-24 13:37:28.488 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 29.423undefined 2024-05-24 13:37:29.050 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 12.011undefined 2024-05-24 13:37:30.787 - info: tuya.0 (2222) bf28a342545afcead8nqea: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.74:6668 2024-05-24 13:37:31.806 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 15.796undefined 2024-05-24 13:37:33.554 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 10.043undefined 2024-05-24 13:37:34.386 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 21.701undefined 2024-05-24 13:37:35.520 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 24.056undefined 2024-05-24 13:37:41.157 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.71undefined 2024-05-24 13:37:43.939 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 15.039undefined 2024-05-24 13:37:44.952 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 3.768undefined 2024-05-24 13:37:47.119 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 16.638undefined 2024-05-24 13:37:47.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 21.953undefined 2024-05-24 13:37:51.508 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 19.077undefined 2024-05-24 13:37:51.535 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 11.423undefined 2024-05-24 13:37:52.966 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.95undefined 2024-05-24 13:37:53.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 12.937undefined 2024-05-24 13:37:54.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 14.299undefined 2024-05-24 13:37:55.942 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 11.776undefined 2024-05-24 13:37:58.926 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.899undefined 2024-05-24 13:38:01.071 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 22.256undefined 2024-05-24 13:38:02.023 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.475undefined 2024-05-24 13:38:03.939 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 10.363undefined============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
Nur der simple-api bekomme ch nicht am laufen,
Dürfte sich mit einer aktuellen Version des Adapters einrenken. Einfach abwarten und dann aktualisieren.
