Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Startet aber immer noch nicht

Ist denn jetzt Ruhe im LogFile?

[Homoran]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt

diese log Zeilen zeigen dass der Restore noch läuft.
In dieser Zeit darf nichts an ioBroker verändert werden, weil es sonst dazu kommen kann, dass der Restore in einem undefinierten Zustand hängen bleibt.

der 4. Versuch deutet aber schon darauf hin, dass etwas nicht stimmt.

Möglicherweise etwas im Unterbau oder in anderen Abhängigkeiten, die nicht auf dem aktuellen Stand sind.

[Bill S. Preston]

@thomas-braun said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Startet aber immer noch nicht

Ist denn jetzt Ruhe im LogFile?

Skript v.2024-04-21

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.28+rpt-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 13:30:19 up  3:02,  2 users,  load average: 0.19, 0.16, 0.11
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Mon 2024-05-06 13:30:19 CEST
           Universal time: Mon 2024-05-06 11:30:19 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
herke
HOME=/home/herke
GROUPS=herke adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
pgrep: pattern that searches for process name longer than 15 characters will result in zero matches
Try `pgrep -f' option to match against the complete command line.
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        645M        1.4G        1.2M        1.9G        3.3G
Swap:           104M          0B        104M
Total:          4.1G        645M        1.5G

Active iob-Instances:   3

         3792 M total memory
          615 M used memory
          916 M active memory
         1297 M inactive memory
         1343 M free memory
          135 M buffer memory
         1636 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 13:30:19 up  3:02,  2 users,  load average: 0.19, 0.16, 0.11
Tasks: 166 total,   1 running, 165 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 25.0 sy,  0.0 ni, 75.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3792.1 total,   1343.2 free,    615.5 used,   1772.0 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   3176.5 avail Mem

*** FAILED SERVICES ***

  UNIT              LOAD   ACTIVE SUB    DESCRIPTION
* motioneye.service loaded failed failed motionEye Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4      117G  7.7G  104G   7% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   64M  447M  13% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon May  6 10:27:24 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:96:C0:F6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=03edf4a5-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Mon May  6 10:27:26 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Mon May  6 10:27:28 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.

Show mounted filesystems:
TARGET                                                  SOURCE         FSTYPE      OPTIONS
/                                                       /dev/mmcblk0p2 ext4        rw,noatime
|-/sys                                                  sysfs          sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                                securityfs     securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                      cgroup2        cgroup2     rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore                                      pstore         pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                         bpf            bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                                   debugfs        debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing                                 tracefs        tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections                            fusectl        fusectl     rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config                                  configfs       configfs    rw,nosuid,nodev,noexec,relatime
|-/proc                                                 proc           proc        rw,relatime
| `-/proc/sys/fs/binfmt_misc                            systemd-1      autofs      rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2600
|   `-/proc/sys/fs/binfmt_misc                          binfmt_misc    binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                                  udev           devtmpfs    rw,nosuid,relatime,size=1671304k,nr_inodes=417826,mode=755
| |-/dev/pts                                            devpts         devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                            tmpfs          tmpfs       rw,nosuid,nodev
| `-/dev/mqueue                                         mqueue         mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                                  tmpfs          tmpfs       rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755
| |-/run/lock                                           tmpfs          tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/credentials/systemd-sysctl.service             ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-sysusers.service           ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/rpc_pipefs                                     sunrpc         rpc_pipefs  rw,relatime
| |-/run/credentials/systemd-tmpfiles-setup.service     ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| `-/run/user/1000                                      tmpfs          tmpfs       rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000
`-/boot/firmware                                        /dev/mmcblk0p1 vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.9G    /var/
1.3G    /var/lib
1.1G    /var/lib/influxdb/data
1.1G    /var/lib/influxdb
1015M   /var/lib/influxdb/data/iobroker/autogen

Archived and active journals take up 167.7M in the file system.

/opt/iobroker/backups:
522M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
230M    /opt/iobroker/iobroker-data/
156M    /opt/iobroker/iobroker-data/files
60M     /opt/iobroker/iobroker-data/backup-objects
51M     /opt/iobroker/iobroker-data/files/javascript.admin
32M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
13M     /opt/iobroker/iobroker-data/objects.jsonl
9.7M    /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
5.4M    /opt/iobroker/iobroker-data/files/vis.0/b6ea130ac9bab9d0acefae88e9ab7ce5.gif

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'


HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0


*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.2-1nodesource1
  Version table:
 *** 18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.10.1
javascript:     6.1.4

nodejs modules from github:     1
+-- iobroker.sourceanalytix@0.4.8-alpha.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#eacbbdeadf4c4bd44636743bc6f52dd21c6f0766)

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : raspberrypi                              - disabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              - disabled
  system.adapter.email.0                  : email                 : raspberrypi                              - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              - disabled
  system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.hm-rpc.2                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.hm-rpc.3                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.ical.0                   : ical                  : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
  system.adapter.influxdb.0               : influxdb              : raspberrypi                              - disabled, port: 8086
  system.adapter.javascript.0             : javascript            : raspberrypi                              - disabled
+ system.adapter.lgtv.0                   : lgtv                  : raspberrypi                              -  enabled
  system.adapter.meross.0                 : meross                : raspberrypi                              - disabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              - disabled, port: 54321
  system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              - disabled, port: 1882, bind: 192.168.178.23
  system.adapter.mqtt.1                   : mqtt                  : raspberrypi                              - disabled, port: 1886, bind: 0.0.0.0
  system.adapter.onvif.0                  : onvif                 : raspberrypi                              - disabled
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              - disabled
  system.adapter.pushover.0               : pushover              : raspberrypi                              - disabled
  system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              - disabled
  system.adapter.sayit.0                  : sayit                 : raspberrypi                              - disabled, port: 0
  system.adapter.shelly.0                 : shelly                : raspberrypi                              - disabled, port: 1883
  system.adapter.sonoff.0                 : sonoff                : raspberrypi                              - disabled, port: 1884, bind: 0.0.0.0
  system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              - disabled
  system.adapter.telegram.0               : telegram              : raspberrypi                              - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : raspberrypi                              - disabled
  system.adapter.tr-064.0                 : tr-064                : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              - disabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi                              - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              - disabled
  system.adapter.vis-weather.0            : vis-weather           : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              - disabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.worx.0                   : worx                  : raspberrypi                              - disabled
  system.adapter.zigbee.1                 : zigbee                : raspberrypi                              - disabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 6.13.16  , installed 6.10.1 [Updatable]
Adapter    "backitup"     : 2.11.0   , installed 2.6.19 [Updatable]
Adapter    "discovery"    : 4.4.0    , installed 2.6.1  [Updatable]
Adapter    "dwd"          : 2.8.5    , installed 2.8.3  [Updatable]
Adapter    "email"        : 1.2.2    , installed 1.0.9  [Updatable]
Adapter    "fullybrowser" : 3.0.12   , installed 2.1.2  [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 3.0.43 [Updatable]
Adapter    "hm-rpc"       : 1.17.0   , installed 1.15.16 [Updatable]
Adapter    "ical"         : 1.14.3   , installed 1.7.4  [Updatable]
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.0.2  [Updatable]
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 7.8.0    , installed 6.1.4  [Updatable]
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "lgtv"         : 2.2.0    , installed 2.1.1  [Updatable]
Adapter    "meross"       : 1.17.0   , installed 1.17.0
Adapter    "mqtt"         : 5.2.0    , installed 2.4.0  [Updatable]
Adapter    "onvif"        : 1.1.3    , installed 0.4.4  [Updatable]
Adapter    "openweathermap": 1.0.4   , installed 0.3.3  [Updatable]
Adapter    "pushover"     : 3.0.6    , installed 3.0.3  [Updatable]
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.9.0    , installed 6.3.1  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "sonoff"       : 3.0.3    , installed 2.5.3  [Updatable]
Adapter    "telegram"     : 3.2.1    , installed 1.8.1  [Updatable]
Adapter    "text2command" : 3.0.3    , installed 2.3.0  [Updatable]
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.3.0  [Updatable]
Adapter    "vis-icontwo"  : 1.5.0    , installed 0.93.0 [Updatable]
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.3  [Updatable]
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.0.12 [Updatable]
Adapter    "vis-justgage" : 2.1.7    , installed 1.0.2  [Updatable]
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable]
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.9    , installed 2.5.6  [Updatable]
Adapter    "web"          : 6.2.5    , installed 3.4.1  [Updatable]
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "zigbee"       : 1.10.3   , installed 1.8.23 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        11123
States:         9533

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 https://repos.influxdata.com/debian stable InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 http://deb.debian.org/debian bookworm-updates InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      106        5713       743/influxd
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      108        5653       676/motion
tcp        0      0 127.0.0.1:8081          0.0.0.0:*               LISTEN      108        5652       676/motion
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16833      4001/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       16826      4001/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          5621       680/sshd: /usr/sbin
tcp6       0      0 :::8086                 :::*                    LISTEN      106        7269       743/influxd
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       14053      4026/io.admin.0
tcp6       0      0 :::3000                 :::*                    LISTEN      107        7286       791/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          5623       680/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        4077       510/avahi-daemon: r
udp        0      0 0.0.0.0:34505           0.0.0.0:*                           104        4079       510/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        4078       510/avahi-daemon: r
udp6       0      0 :::38276                :::*                                104        4080       510/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-05-06 09:53:01.366  - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_52_52_262Z-debug-0.log
2024-05-06 09:53:01.367  - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127
2024-05-06 09:53:02.393  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 09:53:03.395  - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 3 attempt
2024-05-06 09:53:03.395  - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion
2024-05-06 09:53:06.574  - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0
2024-05-06 09:53:06.577  - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call)
2024-05-06 09:53:23.146  - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR!   throw err;npm ERR!   ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR!     at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR!     at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR!     at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR!     at require (node:internal/modules/helpers:177:18)npm ERR!     at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR!     at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR!     at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR!     at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR!     at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR!   code: 'MODULE_NOT_FOUND',npm ERR!   requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_53_07_316Z-debug-0.loghost.raspberrypi Cannot install iobroker.sayit@1.12.3: 1
2024-05-06 09:53:24.175  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 09:53:25.176  - warn: host.raspberrypi startInstance cannot find adapter "mihome-vacuum@4.0.0". Try to install it... 4 attempt
2024-05-06 09:53:25.177  - info: host.raspberrypi iobroker install mihome-vacuum@4.0.0 using installedVersion
2024-05-06 09:53:28.336  - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0
2024-05-06 09:53:28.339  - info: host.raspberrypi iobroker npm-install: Installing iobroker.mihome-vacuum@4.0.0... (System call)
2024-05-06 09:53:38.098  - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_53_29_042Z-debug-0.log
2024-05-06 09:53:38.099  - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127
2024-05-06 09:53:39.125  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 09:53:40.126  - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt
2024-05-06 09:53:40.127  - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion
2024-05-06 09:53:43.281  - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0
2024-05-06 09:53:43.283  - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call)
2024-05-06 09:53:59.969  - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR!   throw err;npm ERR!   ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR!     at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR!     at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR!     at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR!     at require (node:internal/modules/helpers:177:18)npm ERR!     at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR!     at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR!     at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR!     at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR!     at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR!   code: 'MODULE_NOT_FOUND',npm ERR!   requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_53_43_983Z-debug-0.log
2024-05-06 09:53:59.969  - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1
2024-05-06 09:54:00.997  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 09:54:01.998  - error: host.raspberrypi Cannot download and install adapter "mihome-vacuum@4.0.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!
2024-05-06 09:54:02.500  - error: host.raspberrypi Cannot download and install adapter "sayit@1.12.3". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!

So sieht es jetzt aus. Die Zeit wurde anscheienend eingestellt

[Bill S. Preston]

@homoran said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt

diese log Zeilen zeigen dass der Restore noch läuft.
In dieser Zeit darf nichts an ioBroker verändert werden, weil es sonst dazu kommen kann, dass der Restore in einem undefinierten Zustand hängen bleibt.

der 4. Versuch deutet aber schon darauf hin, dass etwas nicht stimmt.

Möglicherweise etwas im Unterbau oder in anderen Abhängigkeiten, die nicht auf dem aktuellen Stand sind.

Hilft es den Iobroker nochmal zu löschen und den Restor nochmal auszuführen?

Wie bringe ich sourceanalytix auf die Beta ?

[Thomas Braun]

@bill-s-preston

iob update
iob upgrade all -y

[Homoran]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

So sieht es jetzt aus.

letzte Aktion um 09:54??
vor fast 4 Stunden?

[Bill S. Preston]

@homoran said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

So sieht es jetzt aus.

letzte Aktion um 09:54??
vor fast 4 Stunden?

Ja das passt

[Bill S. Preston]

@thomas-braun said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston

iob update
iob upgrade all -y

Läuft. Dauert etwas...

[Thomas Braun]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Dauert etwas...

Klar, bei 29 Adaptern...

[Bill S. Preston]

So, update ist fertig. Auch nach nem reboot des Systems ist der Broker still.

[Thomas Braun]

@bill-s-preston

iob diag

sagt?

[Bill S. Preston]

@thomas-braun said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston

iob diag

sagt?

Skript v.2024-04-21

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.28+rpt-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 14:34:15 up 4 min,  2 users,  load average: 0.83, 0.74, 0.33
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Mon 2024-05-06 14:34:15 CEST
           Universal time: Mon 2024-05-06 12:34:15 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
herke
HOME=/home/herke
GROUPS=herke adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
pgrep: pattern that searches for process name longer than 15 characters will result in zero matches
Try `pgrep -f' option to match against the complete command line.
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        641M        2.7G        1.2M        669M        3.3G
Swap:           104M          0B        104M
Total:          4.1G        641M        2.8G

Active iob-Instances:   3

         3792 M total memory
          612 M used memory
          871 M active memory
          200 M inactive memory
         2613 M free memory
           64 M buffer memory
          573 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 14:34:16 up 4 min,  2 users,  load average: 0.83, 0.74, 0.33
Tasks: 186 total,   2 running, 184 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3792.1 total,   2612.8 free,    613.1 used,    638.6 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   3178.9 avail Mem

*** FAILED SERVICES ***

  UNIT              LOAD   ACTIVE SUB    DESCRIPTION
* motioneye.service loaded failed failed motionEye Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4      117G  8.1G  103G   8% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   64M  447M  13% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon May  6 14:30:07 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:96:C0:F6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=03edf4a5-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Mon May  6 14:30:09 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Mon May  6 14:30:11 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.

Show mounted filesystems:
TARGET                                                  SOURCE         FSTYPE      OPTIONS
/                                                       /dev/mmcblk0p2 ext4        rw,noatime
|-/sys                                                  sysfs          sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                                securityfs     securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                      cgroup2        cgroup2     rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore                                      pstore         pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                         bpf            bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                                   debugfs        debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing                                 tracefs        tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections                            fusectl        fusectl     rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config                                  configfs       configfs    rw,nosuid,nodev,noexec,relatime
|-/proc                                                 proc           proc        rw,relatime
| `-/proc/sys/fs/binfmt_misc                            systemd-1      autofs      rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2408
|   `-/proc/sys/fs/binfmt_misc                          binfmt_misc    binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                                  udev           devtmpfs    rw,nosuid,relatime,size=1671304k,nr_inodes=417826,mode=755
| |-/dev/pts                                            devpts         devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                            tmpfs          tmpfs       rw,nosuid,nodev
| `-/dev/mqueue                                         mqueue         mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                                  tmpfs          tmpfs       rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755
| |-/run/lock                                           tmpfs          tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/credentials/systemd-sysctl.service             ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-sysusers.service           ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/rpc_pipefs                                     sunrpc         rpc_pipefs  rw,relatime
| |-/run/credentials/systemd-tmpfiles-setup.service     ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| `-/run/user/1000                                      tmpfs          tmpfs       rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000
`-/boot/firmware                                        /dev/mmcblk0p1 vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.9G    /var/
1.3G    /var/lib
1.1G    /var/lib/influxdb/data
1.1G    /var/lib/influxdb
1015M   /var/lib/influxdb/data/iobroker/autogen

Archived and active journals take up 175.7M in the file system.

/opt/iobroker/backups:
522M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
286M    /opt/iobroker/iobroker-data/
210M    /opt/iobroker/iobroker-data/files
60M     /opt/iobroker/iobroker-data/backup-objects
57M     /opt/iobroker/iobroker-data/files/javascript.admin
38M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
19M     /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map
14M     /opt/iobroker/iobroker-data/objects.jsonl
8.5M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js
8.2M    /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'


HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0


*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.2-1nodesource1
  Version table:
 *** 18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

nodejs modules from github:     1
+-- iobroker.sourceanalytix@0.4.8-alpha.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#eacbbdeadf4c4bd44636743bc6f52dd21c6f0766)

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : raspberrypi                              - disabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              - disabled
  system.adapter.email.0                  : email                 : raspberrypi                              - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              - disabled
  system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.hm-rpc.2                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.hm-rpc.3                 : hm-rpc                : raspberrypi                              - disabled, port: 0
  system.adapter.ical.0                   : ical                  : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
  system.adapter.influxdb.0               : influxdb              : raspberrypi                              - disabled, port: 8086
  system.adapter.javascript.0             : javascript            : raspberrypi                              - disabled
+ system.adapter.lgtv.0                   : lgtv                  : raspberrypi                              -  enabled
  system.adapter.meross.0                 : meross                : raspberrypi                              - disabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              - disabled, port: 54321
  system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              - disabled, port: 1882, bind: 192.168.178.23
  system.adapter.mqtt.1                   : mqtt                  : raspberrypi                              - disabled, port: 1886, bind: 0.0.0.0
  system.adapter.onvif.0                  : onvif                 : raspberrypi                              - disabled
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              - disabled
  system.adapter.pushover.0               : pushover              : raspberrypi                              - disabled
  system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              - disabled
  system.adapter.sayit.0                  : sayit                 : raspberrypi                              - disabled, port: 0
  system.adapter.shelly.0                 : shelly                : raspberrypi                              - disabled, port: 1883
  system.adapter.sonoff.0                 : sonoff                : raspberrypi                              - disabled, port: 1884, bind: 0.0.0.0
  system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              - disabled
  system.adapter.telegram.0               : telegram              : raspberrypi                              - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : raspberrypi                              - disabled
  system.adapter.tr-064.0                 : tr-064                : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              - disabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi                              - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              - disabled
  system.adapter.vis-weather.0            : vis-weather           : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              - disabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.worx.0                   : worx                  : raspberrypi                              - disabled
  system.adapter.zigbee.1                 : zigbee                : raspberrypi                              - disabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 1.2.2    , installed 1.2.2
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.17.0
Adapter    "ical"         : 1.14.3   , installed 1.14.3
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "lgtv"         : 2.2.0    , installed 2.2.0
Adapter    "meross"       : 1.17.0   , installed 1.17.0
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "onvif"        : 1.1.3    , installed 1.1.3
Adapter    "openweathermap": 1.0.4   , installed 1.0.4
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.9.0    , installed 6.9.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.7.0    , installed 6.6.1  [Updatable]
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "telegram"     : 3.2.1    , installed 3.2.1
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.5.0    , installed 1.5.0
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.4
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.9    , installed 2.5.9
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.6.1    , installed 2.5.11 [Updatable]
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        11125
States:         9533

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      106        2951       752/influxd
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      108        5759       678/motion
tcp        0      0 127.0.0.1:8081          0.0.0.0:*               LISTEN      108        5758       678/motion
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1685       682/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       5871       833/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       5864       833/iobroker.js-con
tcp6       0      0 :::3000                 :::*                    LISTEN      107        1857       832/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          1687       682/sshd: /usr/sbin
tcp6       0      0 :::8086                 :::*                    LISTEN      106        5841       752/influxd
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       5931       876/io.admin.0
udp        0      0 0.0.0.0:56049           0.0.0.0:*                           104        5664       534/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        5662       534/avahi-daemon: r
udp6       0      0 :::55982                :::*                                104        5665       534/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        5663       534/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-05-06 14:32:13.828  - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_04_539Z-debug-0.log
2024-05-06 14:32:13.829  - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127
2024-05-06 14:32:14.856  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 14:32:15.856  - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 3 attempt
2024-05-06 14:32:15.857  - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion
2024-05-06 14:32:19.039  - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0
2024-05-06 14:32:19.042  - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call)
2024-05-06 14:32:35.524  - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR!   throw err;npm ERR!   ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR!     at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR!     at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR!     at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR!     at require (node:internal/modules/helpers:177:18)npm ERR!     at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR!     at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR!     at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR!     at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR!     at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR!   code: 'MODULE_NOT_FOUND',npm ERR!   requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_19_779Z-debug-0.log
2024-05-06 14:32:35.525  - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1
2024-05-06 14:32:36.555  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 14:32:37.556  - warn: host.raspberrypi startInstance cannot find adapter "mihome-vacuum@4.0.0". Try to install it... 4 attempt
2024-05-06 14:32:37.557  - info: host.raspberrypi iobroker install mihome-vacuum@4.0.0 using installedVersion
2024-05-06 14:32:40.645  - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0
2024-05-06 14:32:40.647  - info: host.raspberrypi iobroker npm-install: Installing iobroker.mihome-vacuum@4.0.0... (System call)
2024-05-06 14:32:50.493  - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_41_399Z-debug-0.loghost.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127
2024-05-06 14:32:51.518  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 14:32:52.519  - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt
2024-05-06 14:32:52.519  - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion
2024-05-06 14:32:55.668  - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0
2024-05-06 14:32:55.671  - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call)
2024-05-06 14:33:11.937  - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR!   throw err;npm ERR!   ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR!     at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR!     at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR!     at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR!     at require (node:internal/modules/helpers:177:18)npm ERR!     at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR!     at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR!     at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR!     at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR!     at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR!   code: 'MODULE_NOT_FOUND',npm ERR!   requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_56_377Z-debug-0.log
2024-05-06 14:33:11.938  - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1
2024-05-06 14:33:12.966  - info: host.raspberrypi iobroker npm-install: exit 25
2024-05-06 14:33:13.966  - error: host.raspberrypi Cannot download and install adapter "mihome-vacuum@4.0.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!
2024-05-06 14:33:14.467  - error: host.raspberrypi Cannot download and install adapter "sayit@1.12.3". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!

[Thomas Braun]

@bill-s-preston

iob start web

[crunchip]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

motioneye.service loaded failed failed

So viel ich weiß, müssen ggf Ports angepasst werden um Motioneye und iobroker zusammen auf einen Rechner laufen zu lassen
Unabhängig davon, reichen 4GB RAM da eh nicht aus

[Bill S. Preston]

@thomas-braun said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston

iob start web

Gemacht. Startet noch immer nicht.

[Bill S. Preston]

@crunchip said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

motioneye.service loaded failed failed

So viel ich weiß, müssen ggf Ports angepasst werden um Motioneye und iobroker zusammen auf einen Rechner laufen zu lassen
Unabhängig davon, reichen 4GB RAM da eh nicht aus

MoitonEye und Iobroker laufen seit zwei Jahren ohne Probleme zusammen auf einem 4GB Pi.
Aber ich habe jetzt bei dem Neuen System versucht MotionEye zu öffnen. Leider ebenfalls Still.
MotionEye lläuft aber auf Port 8765. Und wie gesagt, bis gestern vor dem Restore auch ohne Probleme.

[Homoran]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Startet noch immer nicht.

was genau?
wie genau?

was passiert?

[Bill S. Preston]

@homoran said in Iobroker startet nicht mehr nach Restore:

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Startet noch immer nicht.

was genau?
wie genau?

was passiert?

Iobroker über den Browser aufrufen (192.168.178.68:8081)

Firefox kann keine Verbindung zu dem Server unter 192.168.178.68:8081 aufbauen.

Bei MotionEye das gleiche.

[Homoran]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Iobroker über den Browser aufrufen (192.168.178.68:8081)

welcher Browser?
und was exakt steht in der Adresszeile?

[Thomas Braun]

@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:

Aber ich habe jetzt bei dem Neuen System versucht MotionEye zu öffnen. Leider ebenfalls Still.

Der Service 'failed' ja auch.

Die Adapter 'ws' und 'socketio' bitte auch updaten.
War der 'socketio' nicht ohnehin obsolet?