UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Redbeard_81]

Hallo zusammen,

ich habe einen Raspberrypi 4 mit 64-bit bookworm NEU aufgesetzt.
ioBroker wurde wie folgt installiert:

• sudo apt update && sudo apt full-upgrade
• curl -sL https://iobroker.net/install.sh | bash -

über den backup-Adapter wurde ein backup eingespielt. Alle Adapter außer der mihome-vacuum wurden installiert und gestartet.
Wenn ich den mihome-vacumm Adapter neu installieren will, kommt folgende Meldung im Display.

Diese Fehlermeldung kommt auch ohne das backup vorher eingespielt zu haben.

Hat hier vielleicht jemand einen Tip, woran dies liegen kann.

Danke

[Thomas Braun]

@redbeard_81 sagte in npm Error bei mihome-vacuum Adapter Installation:

Hat hier vielleicht jemand einen Tip, woran dies liegen kann.

Installier die Beta-Version des Adapters oder warte bis der im stable auftaucht.

[Ein ehemaliger Benutzer]

@redbeard_81

Hi,

ein "iob fix" sollte das Problem beheben.

Ansonsten bitte mal die Ausgabe von "iob diag" hier posten.

[Thomas Braun]

@redbeard_81

Siehe auch hier:
https://forum.iobroker.net/topic/73800/iobroker-exit-25-bei-adapter-update/8

Und bitte Fehlermeldungen in Textform nie als Screenshot sondern immer als Text in CodeTags eingebettet posten. Dann kann man das weiter verwerten und die Suchfunktion findet die auch dann.

[Redbeard_81]

@ilovegym

Hi,

ein "iob fix" habe ich durchgeführt aber ohne erfolg.

Die Ausgabe vom "iob diag" ergibt folgendes:

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspberrypi-4-2
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.22-v8+
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 11:19:24 up 12 min,  2 users,  load average: 0.33, 0.30, 0.17
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2024-04-06 11:19:24 CEST
           Universal time: Sat 2024-04-06 09:19:24 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        497M        7.5G        1.2M        333M        7.7G
Swap:           104M          0B        104M
Total:          8.3G        497M        7.6G

         7808 M total memory
          474 M used memory
          518 M active memory
           77 M inactive memory
         7125 M free memory
           28 M buffer memory
          289 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     781M  1.2M  780M   1% /run
/dev/sda2      ext4      117G  2.9G  109G   3% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1      vfat      510M   63M  448M  13% /boot/firmware
tmpfs          tmpfs     781M     0  781M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Apr  6 11:07:13 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:A5:E3:5F vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=12eef1ae-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Apr  6 11:07:17 2024] EXT4-fs (sda2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Sat Apr  6 11:07:19 2024] EXT4-fs (sda2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE    FSTYPE OPTIONS
/                /dev/sda2 ext4   rw,noatime
`-/boot/firmware /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
541M    /var/
207M    /var/cache
201M    /var/cache/apt
169M    /var/lib
140M    /var/lib/apt/lists

Archived and active journals take up 64.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
19M     /opt/iobroker/iobroker-data/
15M     /opt/iobroker/iobroker-data/files
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
4.5M    /opt/iobroker/iobroker-data/objects.jsonl
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
652K    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.1
/usr/bin/node           v18.20.1
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.1-1nodesource1
  Candidate: 18.20.1-1nodesource1
  Version table:
 *** 18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi-4-2                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi-4-2                          -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi-4-2                          -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi-4-2                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Controller "js-controller": 5.0.19   , installed 5.0.19

Objects and States
Please stand by - This may take a while
Objects:        143
States:         103

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          7327       701/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       5564       668/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       5557       668/iobroker.js-con
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       5663       743/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          7329       701/sshd: /usr/sbin
udp        0      0 0.0.0.0:52312           0.0.0.0:*                           104        5386       541/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        5384       541/avahi-daemon: r
udp6       0      0 fe80::9d36:65c3:850:546 :::*                                0          4797       602/NetworkManager
udp6       0      0 :::5353                 :::*                                104        5385       541/avahi-daemon: r
udp6       0      0 :::50605                :::*                                104        5387       541/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-04-06 11:07:09.145  - info: host.raspberrypi-4-2 Delete state "system.host.raspberrypi-4-2.versions.nodeNewest"
2024-04-06 11:07:09.163  - info: host.raspberrypi-4-2 instance system.adapter.admin.0 started with pid 743
2024-04-06 11:07:09.195  - info: host.raspberrypi-4-2 Delete state "system.host.raspberrypi-4-2.versions.nodeNewestNext"
2024-04-06 11:07:09.203  - info: host.raspberrypi-4-2 Delete state "system.host.raspberrypi-4-2.versions.npmCurrent"
2024-04-06 11:07:09.211  - info: host.raspberrypi-4-2 Delete state "system.host.raspberrypi-4-2.versions.npmNewest"
2024-04-06 11:07:09.218  - info: host.raspberrypi-4-2 Delete state "system.host.raspberrypi-4-2.versions.npmNewestNext"
2024-04-06 11:07:09.225  - info: host.raspberrypi-4-2 Some obsolete host states deleted.
2024-04-06 11:07:11.857  - info: admin.0 (743) starting. Version 6.13.16 in /opt/iobroker/node_modules/iobroker.admin, node: v18.20.1, js-controller: 5.0.19
2024-04-06 11:07:11.910  - info: admin.0 (743) requesting all objects
2024-04-06 11:07:12.355  - info: admin.0 (743) received all objects
2024-04-06 11:07:12.811  - info: admin.0 (743) socket.io server listening on port 8081
2024-04-06 11:07:12.817  - info: admin.0 (743) http server listening on port 8081
2024-04-06 11:07:12.818  - info: admin.0 (743) Use link "http://127.0.0.1:8081" to configure.
2024-04-06 11:07:13.104  - info: host.raspberrypi-4-2 instance system.adapter.backitup.0 started with pid 819
2024-04-06 11:07:15.324  - info: backitup.0 (819) starting. Version 2.10.11 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.20.1, js-controller: 5.0.19
2024-04-06 11:07:15.390  - info: backitup.0 (819) [iobroker] backup will be activated at 02:48 every 1 day(s)
2024-04-06 11:07:17.096  - info: host.raspberrypi-4-2 instance system.adapter.discovery.0 started with pid 838
2024-04-06 11:07:18.897  - info: discovery.0 (838) starting. Version 4.4.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.20.1, js-controller: 5.0.19
2024-04-06 11:15:14.954  - info: admin.0 (743) ==> Connected system.user.admin from ::ffff:192.168.178.24
2024-04-06 11:15:23.956  - info: host.raspberrypi-4-2 iobroker add mihome-vacuum --host raspberrypi-4-2
2024-04-06 11:15:26.901  - info: host.raspberrypi-4-2 iobroker NPM version: 10.5.0
2024-04-06 11:15:26.904  - info: host.raspberrypi-4-2 iobroker Installing iobroker.mihome-vacuum@4.1.1... (System call)
2024-04-06 11:15:33.044  - error: host.raspberrypi-4-2 iobroker npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-04-06T09_15_27_623Z-debug-0.log
2024-04-06 11:15:33.045  - error: host.raspberrypi-4-2 iobroker host.raspberrypi-4-2 Cannot install iobroker.mihome-vacuum@4.1.1: 127
2024-04-06 11:15:34.120  - info: host.raspberrypi-4-2 iobroker exit 25

[Thomas Braun]

@redbeard_81

Hast du jetzt die Beta des Adapters eingespielt?

[Redbeard_81]

@thomas-braun
Hi,

nein noch nicht, muss noch gucken wie das geht. Habe noch nie eine BETA installiert.

[Thomas Braun]

@redbeard_81

[Redbeard_81]

@thomas-braun

Danke, habe ich installiert.
Die Installation konnte durchgeführt werden, die Verfügbare Version ist 4.1.1 und Installiert ist 4.2.0.
Unter den Objekten wird mir auch ein Ordner angezeigt, nur unter den Instanzen wird dieser nicht aufgeführt.
Daraufhin habe ich den Adapter über den normalen Weg installiert und siehe da es funktioniert.

Kann das eventuell was mit den 64-bit zu tun haben? Denn auf einem anderen Raspberrypi 4 läuft ein 32-bit System und dort funktioniert der Adapter normal.

[Thomas Braun]

@redbeard_81 sagte in npm Error bei mihome-vacuum Adapter Installation:

Die Installation konnte durchgeführt werden, die Verfügbare Version ist 4.1.1 und Installiert ist 4.2.0.
Unter den Objekten wird mir auch ein Ordner angezeigt, nur unter den Instanzen wird dieser nicht aufgeführt.
Daraufhin habe ich den Adapter über den normalen Weg installiert und siehe da es funktioniert.

Ich kann dir mit der schwammigen Beschreibung nicht folgen.

iob update 
iob upgrade

sagt?

[Redbeard_81]

@thomas-braun said in npm Error bei mihome-vacuum Adapter Installation:

Ich kann dir mit der schwammigen Beschreibung nicht folgen.

iob update
iob upgrade

sagt?

Sorry, damit kann ich jetzt nichts Anfangen, wo stand das?

[Thomas Braun]

@redbeard_81

Das sollst du in dein Terminal hacken. Ausgabe dann wieder hier rein, in CodeeTags eingebettet.

[Redbeard_81]

@thomas-braun

Der mihome-vacuum Adapter wird nicht angezeigt

"iob update"

Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "daikin"       : 1.4.2    , installed 1.4.2
Adapter    "discovery"    : 4.4.0    , installed 3.0.3  [Updatable]
Adapter    "ems-esp"      : 3.0.3    , installed 2.8.0  [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.16.0   , installed 1.16.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "node-red"     : 5.2.0    , installed 5.1.0  [Updatable]
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.8.0    , installed 6.6.1  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.6.1    , installed 4.2.0  [Updatable]
Adapter    "tado"         : 0.5.3    , installed 0.5.3
Adapter    "tankerkoenig" : 3.3.7    , installed 2.1.1  [Updatable]
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "web"          : 6.2.3    , installed 4.3.0  [Updatable]
Adapter    "ws"           : 2.5.11   , installed 1.3.0  [Updatable]
Adapter    "zigbee"       : 1.10.1   , installed 1.10.1

"iob upgrade"

This upgrade of "ws" will at least introduce the following changes:
==========================================================================
-> 2.5.11:
Some packages were updated

-> 2.5.10:
updated ws-server to increase file limit to 500 MB

-> 2.5.9:
Corrected the crash if authentication is enabled

-> 2.5.8:
Corrected adapter termination if the alias has no target

-> 2.5.7:
upgraded socket-classes to fix vis problems

-> 2.5.6:
upgraded socket-classes to correct the error by unsubscribing on client disconnect

-> 2.5.5:
upgraded socket-classes to fix crash cases
==========================================================================

BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES!
Would you like to upgrade ws from @1.3.0 to @2.5.11 now? [(y)es, (n)o]: Y
Update ws from @1.3.0 to @2.5.11
NPM version: 10.5.0
Installing iobroker.ws@2.5.11... (System call)

added 2 packages, removed 3 packages, and changed 1 package in 9s

134 packages are looking for funding
  run `npm fund` for details
upload [11] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [10] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [9] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [8] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [7] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [6] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [5] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [4] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [3] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [2] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [1] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/jsonConfig.json jsonConfig.json application/json
upload [0] ws.admin /opt/iobroker/node_modules/iobroker.ws/admin/ws.png ws.png image/png

This upgrade of "web" will at least introduce the following changes:
==========================================================================
-> 6.2.3:
update websocket library to increase maximum file size from 100 MB to 500 MB

-> 6.2.2:
Corrected the crash if authentication is enabled

-> 6.2.1:
Added the user access list option

-> 6.1.10:
Corrected the start screen

-> 6.1.7:
Added the public accessibility check

-> 6.1.6:
Corrected adapter termination if the alias has no target
Corrected socket.io connection

-> 6.1.4:
upgrade socketio and ws dependencies to fix vis subscribe problem
==========================================================================

BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES!
Would you like to upgrade web from @4.3.0 to @6.2.3 now? [(y)es, (n)o]: ^Y
No upgrade of "web" desired.

This upgrade of "tankerkoenig" will at least introduce the following changes:
==========================================================================
-> 3.3.7:
added difference to jsonTable #116
added a log message for the error `parameter error`
set the name length to 34 characters
Added verification if the api key is encrypted
updated the Dependencies

-> 3.3.6:
corrected the position of the warning message in the user interface
Updated documentation and migration guide for stable version 3.3.6

-> 3.3.5:
fixed copy/paste bug in the UI

-> 3.3.4:
Fixed an issue where a zip code starting with 0 was displayed incorrectly [Issue #113].

-> 3.3.3:
fixed => adapter does not fetch data after a `requestData error` e.g. internet crash.
added adapter migration guide from 3.1.x to 3.3.x or 3.2.x to 3.3.x
Problem fixed [Problem #111]

-> 3.3.2:
Fixed TypeError: Cannot read property 'length' of undefined in addDiscount if value is `boolean / undefined`.
Fixed error: DB closed when adapter is stopped
Object creation optimized
changed query interval default value to 10 minutes and minimum value to 10 minutes
added check if station ID is already configured (in edit mode)
Added price difference to last price
added feature request cheapest station display [Issue #109]

-> 3.3.1:
Fixed TypeError: Cannot read properties of undefined Issue #104
added complete street datapoint for each station
==========================================================================

BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES!
Would you like to upgrade tankerkoenig from @2.1.1 to @3.3.7 now? [(y)es, (n)o]: Y
Update tankerkoenig from @2.1.1 to @3.3.7
host.raspberrypi-4-2 Adapter "system.adapter.tankerkoenig.0" is stopped.
NPM version: 10.5.0
Installing iobroker.tankerkoenig@3.3.7... (System call)

removed 1 package, and changed 1 package in 8s

134 packages are looking for funding
  run `npm fund` for details
Update "system.adapter.tankerkoenig.0"
upload [4] tankerkoenig.admin /opt/iobroker/node_modules/iobroker.tankerkoenig/admin/build/index.js build/index.js application/javascript
upload [3] tankerkoenig.admin /opt/iobroker/node_modules/iobroker.tankerkoenig/admin/build/index.js.map build/index.js.map application/json
upload [2] tankerkoenig.admin /opt/iobroker/node_modules/iobroker.tankerkoenig/admin/index_m.html index_m.html text/html
upload [1] tankerkoenig.admin /opt/iobroker/node_modules/iobroker.tankerkoenig/admin/style.css style.css text/css
upload [0] tankerkoenig.admin /opt/iobroker/node_modules/iobroker.tankerkoenig/admin/tankerkoenig.png tankerkoenig.png image/png
host.raspberrypi-4-2 Adapter "system.adapter.tankerkoenig.0" is started

This upgrade of "socketio" will at least introduce the following changes:
==========================================================================
-> 6.6.1:
Just some packages were updated

-> 6.6.0:
Corrected adapter termination if the alias has no target

-> 6.5.7:
upgrade socket-classes to fix error with vis subscriptions

-> 6.5.6:
upgraded socket-classes to correct the error by unsubscribing on client disconnect

-> 6.5.5:
upgrade socket-classes to fix crash cases

-> 6.5.4:
upgrade socket-classes to fix crash cases

-> 6.5.3:
added missing node16 requirement
==========================================================================

BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES!
Would you like to upgrade socketio from @4.2.0 to @6.6.1 now? [(y)es, (n)o]: Y
Update socketio from @4.2.0 to @6.6.1
,NPM version: 10.5.0
Installing iobroker.socketio@6.6.1... (System call)

added 25 packages, removed 3 packages, and changed 1 package in 10s

134 packages are looking for funding
  run `npm fund` for details
upload [11] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [10] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [9] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [8] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [7] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [6] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [5] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [4] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [3] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [2] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [1] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/jsonConfig.json jsonConfig.json application/json
upload [0] socketio.admin /opt/iobroker/node_modules/iobroker.socketio/admin/socketio.png socketio.png image/png

This upgrade of "shelly" will introduce the following changes:
==========================================================================
-> 6.8.0:
Updated BLE script to 0.2 (new shelly motion firmware)
Updated Shelly i3 number limits
Added screenshots to instance configuration

-> 6.7.0:
Updated handling of ble payloads
Added Shelly Wall Display
==========================================================================

Would you like to upgrade shelly from @6.6.1 to @6.8.0 now? [(y)es, (n)o]: Y
Would you like to upgrade shelly from @6.6.1 to @6.8.0 now? [(y)es, (n)o]: Y
Update shelly from @6.6.1 to @6.8.0
NPM version: 10.5.0
Installing iobroker.shelly@6.8.0... (System call)

changed 1 package in 8s

134 packages are looking for funding
  run `npm fund` for details
Update "system.adapter.shelly.0"
Update "system.adapter.shelly.1"
upload [17] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [16] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [15] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [14] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [13] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [12] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [11] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [10] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [9] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [8] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [7] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [6] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/img/mqttGen1.png img/mqttGen1.png image/png
upload [5] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/img/mqttGen2.png img/mqttGen2.png image/png
upload [4] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/img/restrictedLoginGen1.png img/restrictedLoginGen1.png image/png
upload [3] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/img/restrictedLoginGen2.png img/restrictedLoginGen2.png image/png
upload [2] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/jsonConfig.json jsonConfig.json application/json
upload [1] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/shelly.png shelly.png image/png
upload [0] shelly.admin /opt/iobroker/node_modules/iobroker.shelly/admin/words.js words.js application/javascript

This upgrade of "node-red" will introduce the following changes:
==========================================================================
-> 5.2.0:
Added persistence of context data (filesystem)
==========================================================================

Would you like to upgrade node-red from @5.1.0 to @5.2.0 now? [(y)es, (n)o]: Y
Update node-red from @5.1.0 to @5.2.0
host.raspberrypi-4-2 Adapter "system.adapter.node-red.0" is stopped.
NPM version: 10.5.0
Installing iobroker.node-red@5.2.0... (System call)

changed 1 package in 8s

134 packages are looking for funding
  run `npm fund` for details
Update "system.adapter.node-red.0"
upload [13] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [12] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [11] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [10] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [9] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [8] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [7] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [5] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [4] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [3] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [2] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/jsonConfig.json jsonConfig.json application/json
upload [1] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/node-red.png node-red.png image/png
upload [0] node-red.admin /opt/iobroker/node_modules/iobroker.node-red/admin/words.js words.js application/javascript
host.raspberrypi-4-2 Adapter "system.adapter.node-red.0" is started

This upgrade of "ems-esp" will at least introduce the following changes:
==========================================================================
-> 3.0.3:
improve km200 data read to avoid errors

-> 3.0.2:
improve km200 data read to avoid errors - try http get up to 3 times now - especially for recordings

-> 3.0.1:
change KM200 error messages for recordings

-> 3.0.0:
Node >= 18 required
update heatdemand weight changes to be effective during active instance
ems-esp gateway: Raw telegram search for EMS+ thermostats: switchPrograms and holidayModes (RC310/RC300)
create writable objects / states for switchPrograms and holidayModes
this function is only active when no km200 gateway is selected - ems-esp gateway only
improve error messages for km200 (wrong ip / passwords)
small changes within PDF adapter documentation

-> 3.0.0-alpha.2:
Node >= 18 required
update heatdemand weight changes to be effective during active instance

-> 3.0.0-alpha.1:
ems-esp gateway: Raw telegram search for EMS+ thermostats: switchPrograms and holidayModes (RC310/RC300)
create writable objects / states for switchPrograms and holidayModes
this function is only active when no km200 gateway is selected - ems-esp gateway only
improve error messages for km200 (wrong ip / passwords)
small changes within PDF adapter documentation

-> 3.0.0-alpha.0:
Search for ems-esp states for EMS+ thermostats: switchTimes and holidayModes (RC310/RC300)
Implement raw telegram search for EMS+ entities and create writable objects / states
The search is only active when no km200 gateway is selected
==========================================================================

BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES!
Would you like to upgrade ems-esp from @2.8.0 to @3.0.3 now? [(y)es, (n)o]: Y
Update ems-esp from @2.8.0 to @3.0.3
NPM version: 10.5.0
Installing iobroker.ems-esp@3.0.3... (System call)

changed 1 package in 8s

134 packages are looking for funding
  run `npm fund` for details
Update "system.adapter.ems-esp.0"
upload [6] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/admin.d.ts admin.d.ts video/mp2t
upload [5] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/ems-esp.png ems-esp.png image/png
upload [4] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/index_m.html index_m.html text/html
upload [3] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/index_m.js index_m.js application/javascript
upload [2] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/km200.png km200.png image/png
upload [1] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/style.css style.css text/css
upload [0] ems-esp.admin /opt/iobroker/node_modules/iobroker.ems-esp/admin/words.js words.js application/javascript

This upgrade of "discovery" will at least introduce the following changes:
==========================================================================
-> 4.4.0:
Added WLED
Added LaMetric
Removed net-tools from proposals

-> 4.3.0:
Replaced vis with vis-2

-> 4.2.0:
Changed detection of myvbus and resol

-> 4.1.0:
Added detection of myvbus and resol

-> 4.0.0:
Added: frontier_silicon, sma-em, and speedwire
Dropped node14 support, refactoring

-> 3.2.0:
Added iControl to the suggested adapters

-> 3.1.0:
Corrected syntax error in the german translation
==========================================================================

BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES!
Would you like to upgrade discovery from @3.0.3 to @4.4.0 now? [(y)es, (n)o]: Y
Update discovery from @3.0.3 to @4.4.0
NPM version: 10.5.0
Installing iobroker.discovery@4.4.0... (System call)

added 1 package, removed 16 packages, and changed 1 package in 8s

122 packages are looking for funding
  run `npm fund` for details
Update "system.adapter.discovery.0"
upload [6] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/discovery.png discovery.png image/png
upload [5] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index.html index.html text/html
upload [4] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index_m.html index_m.html text/html
upload [3] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings.html settings.html text/html
upload [2] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings_m.html settings_m.html text/html
upload [1] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/translateTools.js translateTools.js application/javascript
upload [0] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/words.js words.js application/javascript

[Thomas Braun]

@redbeard_81

Wo ist denn der mihome-vacuum nun hin?

[Redbeard_81]

@thomas-braun

Der mihome-vacuum Adapter ist jetzt auch drin.
Habe jetzt mein Backup eingespielt den Adapter als Beta installiert und nun scheint alles zu funktionieren.

Danke für die Hilfe und geduld

Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "daikin"       : 1.4.2    , installed 1.4.2
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "ems-esp"      : 3.0.3    , installed 3.0.3
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.16.0   , installed 1.16.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "mihome-vacuum": 4.1.1    , installed 4.2.0
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "node-red"     : 5.2.0    , installed 5.2.0
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.8.0    , installed 6.8.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.6.1    , installed 6.6.1
Adapter    "tado"         : 0.5.3    , installed 0.5.3
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "web"          : 6.2.3    , installed 4.3.0  [Updatable]
Adapter    "ws"           : 2.5.11   , installed 2.5.11
Adapter    "zigbee"       : 1.10.1   , installed 1.10.1

[Thomas Braun]

@redbeard_81 sagte in npm Error bei mihome-vacuum Adapter Installation:

Adapter "web" : 6.2.3 , installed 4.3.0 [Updatable]

Heb das auch hoch.

[Siggi0904]

@redbeard_81 ja, das gleiche Problem hatte ich Anfang dieser Woche auch.
Schön zu sehen, dass dir erstens schnell geholfen wurde, zweitens ich nicht allein betroffen bin.

[Wintermute]

Ich habe gerade das Update auf die 4.2.0 und habe das Problem, dass die Installation offenbar sauber durchläuft, der Adapter aber nicht mehr startet ("Verbunden mit Gerät oder Dienst" ist grün, der Rest rot)

iob update und iob upgrade hab ich probiert, keine Resultate:

C:\ioBroker>iob update
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "bring"        : 1.8.4    , installed 1.8.4
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "deconz"       : 1.4.0    , installed 1.4.0
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "echarts"      : 1.7.2    , installed 1.7.2
Adapter    "email"        : 1.2.2    , installed 1.2.2
Adapter    "fb-checkpresence": 1.2.4 , installed 1.2.4
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "homeconnect"  : 1.3.0    , installed 1.3.0
Adapter    "ical"         : 1.14.3   , installed 1.14.3
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "rssfeed"      : 2.6.1    , installed 2.6.1
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.1    , installed 6.6.1
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 3.2.0    , installed 3.2.0
Adapter    "vis"          : 1.5.4    , installed 1.5.1  [Updatable]
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.6.0, installed 3.6.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.5.11   , installed 2.5.11

C:\ioBroker>iob upgrade

This upgrade of "vis" will introduce the following changes:
==========================================================================
-> 1.5.4:
added the new binding operation for getting property of JSON or object
Checked the initialization of the `local_` variables
fixed subscribeOidAtRuntime
Added dynamic web manifest
Optimization for basic-view in widget8
Changed binding regex to accept umlauts
Corrected first installation of vis
==========================================================================

Would you like to upgrade vis from @1.5.1 to @1.5.4 now? [(y)es, (n)o]: n
No upgrade of "vis" desired.

Vis habe ich aus Gründen nicht aktualisiert, weil ansonsten einige ältere Tablets nicht mehr klarkommen.

Ein "Iob fix" bringt:

Need to install the following packages:
  @iobroker/fix@5.0.0
Ok to proceed? (y) y
"(" kann syntaktisch an dieser Stelle nicht verarbeitet werden.
npm notice
npm notice New major version of npm available! 9.5.0 -> 10.5.2
npm notice Changelog: https://github.com/npm/cli/releases/tag/v10.5.2
npm notice Run npm install -g npm@10.5.2 to update!
npm notice

Hat das Eine mit dem Anderen zu tun?

[Wintermute]

@wintermute sagte in npm Error bei mihome-vacuum Adapter Installation:

Ich habe gerade das Update auf die 4.2.0 und habe das Problem, dass die Installation offenbar sauber durchläuft, der Adapter aber nicht mehr startet ("Verbunden mit Gerät oder Dienst" ist grün, der Rest rot)

iob update und iob upgrade hab ich probiert, keine Resultate:

C:\ioBroker>iob update
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "bring"        : 1.8.4    , installed 1.8.4
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "deconz"       : 1.4.0    , installed 1.4.0
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "echarts"      : 1.7.2    , installed 1.7.2
Adapter    "email"        : 1.2.2    , installed 1.2.2
Adapter    "fb-checkpresence": 1.2.4 , installed 1.2.4
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "homeconnect"  : 1.3.0    , installed 1.3.0
Adapter    "ical"         : 1.14.3   , installed 1.14.3
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "rssfeed"      : 2.6.1    , installed 2.6.1
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.1    , installed 6.6.1
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 3.2.0    , installed 3.2.0
Adapter    "vis"          : 1.5.4    , installed 1.5.1  [Updatable]
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.6.0, installed 3.6.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.5.11   , installed 2.5.11

C:\ioBroker>iob upgrade

This upgrade of "vis" will introduce the following changes:
==========================================================================
-> 1.5.4:
added the new binding operation for getting property of JSON or object
Checked the initialization of the `local_` variables
fixed subscribeOidAtRuntime
Added dynamic web manifest
Optimization for basic-view in widget8
Changed binding regex to accept umlauts
Corrected first installation of vis
==========================================================================

Would you like to upgrade vis from @1.5.1 to @1.5.4 now? [(y)es, (n)o]: n
No upgrade of "vis" desired.

Vis habe ich aus Gründen nicht aktualisiert, weil ansonsten einige ältere Tablets nicht mehr klarkommen.

Ein "Iob fix" bringt:

Need to install the following packages:
  @iobroker/fix@5.0.0
Ok to proceed? (y) y
"(" kann syntaktisch an dieser Stelle nicht verarbeitet werden.
npm notice
npm notice New major version of npm available! 9.5.0 -> 10.5.2
npm notice Changelog: https://github.com/npm/cli/releases/tag/v10.5.2
npm notice Run npm install -g npm@10.5.2 to update!
npm notice

Hat das Eine mit dem Anderen zu tun?

Zusätzlich noch "iob info":

C:\ioBroker>iob info
Cannot get disk information: Command failed: df -k /
Der Befehl "df" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.

Platform       : Windows
os             : win64
Architecture   : x64
CPUs           : 2
Model          : Intel(R) Xeon(R) CPU 8460Y+ @ 2.0 GHz
RAM            : 126 GB
System uptime  : 2d. 20:25:52
Node.js        : v18.15.0
time           : 1713536349613
timeOffset     : -120
NPM            : 9.5.0
adapters count : 538

[pusemuckel]

ich habe das gleiche Problem seit dem Update auf die neue Version

host.iobroker
	2024-04-19 16:31:31.427	error	instance system.adapter.mihome-vacuum.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.iobroker
	2024-04-19 16:31:31.426	error	Caught by controller[1]: Node.js v20.12.2
host.iobroker
	2024-04-19 16:31:31.426	error	Caught by controller[0]: }
host.iobroker
	2024-04-19 16:31:31.425	error	Caught by controller[0]: code: 'ERR_INVALID_ARG_VALUE'
host.iobroker
	2024-04-19 16:31:31.425	error	Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1369:14) {
host.iobroker
	2024-04-19 16:31:31.425	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.mihome-vacuum/node_modules/@iobroker/adapter-core/build/cjs/controllerTools.js:34:22)
host.iobroker
	2024-04-19 16:31:31.424	error	Caught by controller[0]: at require (node:internal/modules/helpers:179:18)
host.iobroker
	2024-04-19 16:31:31.424	error	Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1231:19)
host.iobroker
	2024-04-19 16:31:31.424	error	Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:1022:12)
host.iobroker
	2024-04-19 16:31:31.424	error	Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1206:32)
host.iobroker
	2024-04-19 16:31:31.423	error	Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1427:10)
host.iobroker
	2024-04-19 16:31:31.423	error	Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1369:14)
host.iobroker
	2024-04-19 16:31:31.418	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.mihome-vacuum/node_modules/@iobroker/adapter-core/build/cjs/helpers.js:36:53)
host.iobroker
	2024-04-19 16:31:31.418	error	Caught by controller[0]: at createRequire (node:internal/modules/cjs/loader:1506:13)
host.iobroker
	2024-04-19 16:31:31.418	error	Caught by controller[0]: TypeError [ERR_INVALID_ARG_VALUE]: The argument 'filename' must be a file URL object, file URL string, or absolute path string. Received 'file:// /opt/iobroker/node_modules/iobroker.mihome-vacuum/node_modules/@iobroker/adapter-core/build/cjs/helpers.js'
host.iobroker
	2024-04-19 16:31:31.417	error	Caught by controller[0]: ^
host.iobroker
	2024-04-19 16:31:31.417	error	Caught by controller[0]: throw new ERR_INVALID_ARG_VALUE('filename', filename,
host.iobroker
	2024-04-19 16:31:31.416	error	Caught by controller[0]: node:internal/modules/cjs/loader:1506

Hat jemand eine Idee wo man schauen muss um das zu korrigieren ?
Danke!