Hilfe! Nach Update des javascript Adapters 404
-
-
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: Pi400 Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 400 Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 20:45:21 up 8 min, 4 users, load average: 1.68, 2.41, 1.50 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sat 2024-03-02 20:45:22 CET Universal time: Sat 2024-03-02 19:45:22 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin redis gpio i *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.0G 1.0G 61M 1.1G 2.0G Swap: 104M 0B 104M Total: 4.1G 2.0G 1.1G 3792 M total memory 1929 M used memory 2094 M active memory 458 M inactive memory 956 M free memory 90 M buffer memory 949 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper * rc-local.service loaded failed failed /etc/rc.local Compatibility LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 7.2M 373M 2% /run /dev/sda2 ext4 35G 11G 23G 32% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 12K 5.0M 1% /run/lock /dev/sda3 ext4 75G 25G 46G 35% /home/iobroker/Kamera /dev/sda1 vfat 510M 113M 398M 23% /boot/firmware log2ram tmpfs 50M 18M 33M 35% /var/log tmpfs tmpfs 380M 56K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Mar 2 20:36:37 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:16:A9:81 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff0000115200 console=tty1 root=PARTUUID=a6c93f24-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-se80211.ieee80211_regdom=DE [Sat Mar 2 20:36:41 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sat Mar 2 20:36:43 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. [Sat Mar 2 20:36:46 2024] EXT4-fs (sda3): recovery complete [Sat Mar 2 20:36:46 2024] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/home/iobroker/Kamera /dev/sda3 ext4 rw,noatime |-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shors=remount-ro `-/var/log.bak /dev/sda2[/var/log] ext4 rw,noatime Files in neuralgic directories: /var: 2.9G /var/ 2.3G /var/opt/emoncms 2.3G /var/opt 2.0G /var/opt/emoncms/phpfina 272M /var/lib Archived and active journals take up 4.7M in the file system. /opt/iobroker/backups: 29M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 902M /opt/iobroker/iobroker-data/ 693M /opt/iobroker/iobroker-data/files 143M /opt/iobroker/iobroker-data/backup-objects 138M /opt/iobroker/iobroker-data/files/vis-2 78M /opt/iobroker/iobroker-data/files/vis-2/static The five largest files in iobroker-data are: 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 38M /opt/iobroker/iobroker-data/objects.jsonl 36M /opt/iobroker/iobroker-data/files/telegram-menu.admin/build/index.js.map 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 20M /opt/iobroker/iobroker-data/files/s7.admin/static/js/main.4fb08967.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE4X89GM-if00-port0 /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0+dfsg-6~deb12u1+rpi1 500 500 http://raspbian.raspberrypi.com/raspbian bookworm/main armhf Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : Pi400 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : Pi400 - disabled system.adapter.alias-manager.0 : alias-manager : Pi400 - disabled system.adapter.asterisk.0 : asterisk : Pi400 - disabled, port: 5038 system.adapter.awattar.0 : awattar : Pi400 - enabled + system.adapter.backitup.0 : backitup : Pi400 - enabled system.adapter.countdown.0 : countdown : Pi400 - disabled + system.adapter.daikin-cloud.0 : daikin-cloud : Pi400 - enabled system.adapter.daswetter.0 : daswetter : Pi400 - enabled + system.adapter.discovery.0 : discovery : Pi400 - enabled system.adapter.dwd.0 : dwd : Pi400 - enabled + system.adapter.enigma2.0 : enigma2 : Pi400 - enabled + system.adapter.enigma2.1 : enigma2 : Pi400 - enabled system.adapter.feiertage.0 : feiertage : Pi400 - enabled + system.adapter.harmony.0 : harmony : Pi400 - enabled + system.adapter.history.0 : history : Pi400 - enabled system.adapter.ical.0 : ical : Pi400 - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: Pi400 - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : Pi400 - disabled system.adapter.icons-material-png.0 : icons-material-png : Pi400 - disabled system.adapter.icons-material-svg.0 : icons-material-svg : Pi400 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : Pi400 - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Pi400 - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: Pi400 - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : Pi400 - disabled + system.adapter.info.0 : info : Pi400 - enabled + system.adapter.jarvis.0 : jarvis : Pi400 - enabled system.adapter.javascript.0 : javascript : Pi400 - disabled system.adapter.material.0 : material : Pi400 - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : Pi400 - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : Pi400 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : Pi400 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.pollenflug.0 : pollenflug : Pi400 - enabled + system.adapter.pvforecast.0 : pvforecast : Pi400 - enabled + system.adapter.s7.0 : s7 : Pi400 - enabled + system.adapter.s7.1 : s7 : Pi400 - enabled + system.adapter.s7.2 : s7 : Pi400 - enabled + system.adapter.scheduler.0 : scheduler : Pi400 - enabled system.adapter.shuttercontrol.0 : shuttercontrol : Pi400 - disabled system.adapter.solarwetter.0 : solarwetter : Pi400 - enabled system.adapter.telegram-menu.0 : telegram-menu : Pi400 - disabled + system.adapter.telegram.0 : telegram : Pi400 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : Pi400 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command : Pi400 - enabled system.adapter.tibberlink.0 : tibberlink : Pi400 - disabled system.adapter.time-switch.0 : time-switch : Pi400 - disabled + system.adapter.tr-064.0 : tr-064 : Pi400 - enabled + system.adapter.trashschedule.0 : trashschedule : Pi400 - enabled system.adapter.vis-2.0 : vis-2 : Pi400 - disabled system.adapter.vis-bars.0 : vis-bars : Pi400 - disabled system.adapter.vis-history.0 : vis-history : Pi400 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Pi400 - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : Pi400 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Pi400 - disabled system.adapter.vis-justgage.0 : vis-justgage : Pi400 - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : Pi400 - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : Pi400 - disabled system.adapter.vis-metro.0 : vis-metro : Pi400 - disabled system.adapter.vis-players.0 : vis-players : Pi400 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Pi400 - disabled system.adapter.vis-weather.0 : vis-weather : Pi400 - disabled system.adapter.vis.0 : vis : Pi400 - enabled system.adapter.weatherunderground.0 : weatherunderground : Pi400 - enabled + system.adapter.web.0 : web : Pi400 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : Pi400 - enabled, port: 8083, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Pi400 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mihome-vacuum.0 : mihome-vacuum : Pi400 - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : Pi400 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : Pi400 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Pi400 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : Pi400 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : Pi400 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : Pi400 - enabled, port: 8083, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "awattar" : 1.0.6 , installed 1.0.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "countdown" : 2.2.0 , installed 2.2.0 Adapter "daikin-cloud" : 0.3.0 , installed 0.3.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "enigma2" : 2.0.5 , installed 2.0.5 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "harmony" : 1.3.0 , installed 1.3.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mihome-vacuum": 4.1.1 , installed 4.1.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.1.0 , installed 5.1.0 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "s7" : 1.4.2 , installed 1.4.2 Adapter "scheduler" : 1.1.9 , installed 1.1.9 Adapter "shuttercontrol": 1.7.0 , installed 1.6.3 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "solarwetter" : 1.1.5 , installed 1.1.5 Adapter "telegram" : 3.0.1 , installed 3.0.1 Adapter "telegram-menu": 1.5.1 , installed 1.5.1 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 2.2.2 , installed 2.0.1 [Updatable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.11 [Updatable] Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "ws" : 2.5.10 , installed 2.5.10 Objects and States Please stand by - This may take a while Objects: 21646 States: 18855 *** OS-Repositories and Updates *** W: http://raspbian.raspberrypi.com/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Hit:1 http://raspbian.raspberrypi.com/raspbian bookworm InRelease Hit:2 https://linux.teamviewer.com/deb stable InRelease Hit:3 https://packages.sury.org/php bookworm InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: http://raspbian.raspberrypi.com/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Pending Updates: 138 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:45227 0.0.0.0:* LISTEN 102 21713 1387/rpc.statd tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 23637 1681/smbd tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 43540 3120/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19594 880/sshd: /usr/sbin tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 115 22755 1465/proftpd: (acce tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN 0 22720 - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 11382 1/init tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 23636 1681/smbd tcp 0 0 127.0.0.1:5939 0.0.0.0:* LISTEN 0 21933 1397/teamviewerd tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 112 18149 997/mariadbd tcp 0 0 0.0.0.0:39707 0.0.0.0:* LISTEN 0 20272 - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 18803 823/cupsd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 22851 923/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 22909 923/iobroker.js-con tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 113 18858 830/redis-server 12 tcp 0 0 0.0.0.0:42935 0.0.0.0:* LISTEN 0 22633 1393/rpc.mountd tcp 0 0 0.0.0.0:44969 0.0.0.0:* LISTEN 0 22675 1393/rpc.mountd tcp 0 0 0.0.0.0:51113 0.0.0.0:* LISTEN 0 22654 1393/rpc.mountd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 114 17991 889/mosquitto tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 24573 2463/node-red tcp6 0 0 :::139 :::* LISTEN 0 23635 1681/smbd tcp6 0 0 :::22 :::* LISTEN 0 19607 880/sshd: /usr/sbin tcp6 0 0 :::2049 :::* LISTEN 0 22724 - tcp6 0 0 :::111 :::* LISTEN 0 11383 1/init tcp6 0 0 :::80 :::* LISTEN 0 18842 915/apache2 tcp6 0 0 :::445 :::* LISTEN 0 23634 1681/smbd tcp6 0 0 :::47383 :::* LISTEN 0 22666 1393/rpc.mountd tcp6 0 0 :::61991 :::* LISTEN 1000 48050 3205/io.harmony.0 tcp6 0 0 :::37815 :::* LISTEN 0 20274 - tcp6 0 0 :::37857 :::* LISTEN 102 21717 1387/rpc.statd tcp6 0 0 :::58325 :::* LISTEN 0 22639 1393/rpc.mountd tcp6 0 0 ::1:6379 :::* LISTEN 113 18859 830/redis-server 12 tcp6 0 0 :::44397 :::* LISTEN 0 22683 1393/rpc.mountd tcp6 0 0 :::8083 :::* LISTEN 1000 67764 3735/io.web.1 tcp6 0 0 :::8082 :::* LISTEN 1000 40827 2996/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1000 25990 2291/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1000 57699 3361/io.terminal.0 tcp6 0 0 ::1:631 :::* LISTEN 0 18802 823/cupsd tcp6 0 0 :::1883 :::* LISTEN 114 17992 889/mosquitto udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1017 1/init udp 0 0 192.168.2.255:137 0.0.0.0:* 0 20479 1460/nmbd udp 0 0 192.168.2.4:137 0.0.0.0:* 0 20478 1460/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 20304 1460/nmbd udp 0 0 192.168.2.255:138 0.0.0.0:* 0 23553 1460/nmbd udp 0 0 192.168.2.4:138 0.0.0.0:* 0 20480 1460/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 20305 1460/nmbd udp 0 0 0.0.0.0:47259 0.0.0.0:* 102 21711 1387/rpc.statd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1000 51809 3285/io.mihome-vacu udp 0 0 0.0.0.0:41153 0.0.0.0:* 0 20271 - udp 0 0 0.0.0.0:57605 0.0.0.0:* 104 12131 666/avahi-daemon: r udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 48051 3205/io.harmony.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 20877 1369/cups-browsed udp 0 0 127.0.0.1:715 0.0.0.0:* 0 21707 1387/rpc.statd udp 0 0 0.0.0.0:56328 0.0.0.0:* 0 22651 1393/rpc.mountd udp 0 0 0.0.0.0:50270 0.0.0.0:* 0 22621 1393/rpc.mountd udp 0 0 192.168.2.4:5353 0.0.0.0:* 1000 36455 2499/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 12129 666/avahi-daemon: r udp 0 0 0.0.0.0:38825 0.0.0.0:* 0 22672 1393/rpc.mountd udp6 0 0 :::111 :::* 0 1018 1/init udp6 0 0 :::47311 :::* 0 22636 1393/rpc.mountd udp6 0 0 fe80::b6b0:25d8:733:546 :::* 0 22951 797/NetworkManager udp6 0 0 :::43885 :::* 0 20273 - udp6 0 0 :::37921 :::* 104 12132 666/avahi-daemon: r udp6 0 0 :::44220 :::* 0 22657 1393/rpc.mountd udp6 0 0 :::5353 :::* 104 12130 666/avahi-daemon: r udp6 0 0 :::54863 :::* 102 21715 1387/rpc.statd udp6 0 0 :::47056 :::* 0 22678 1393/rpc.mountd *** Log File - Last 25 Lines *** 2024-03-02 20:46:39.096 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog2.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:39.106 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog2.pip.acoutw" has been written without ack-flag with value "1096" 2024-03-02 20:46:39.875 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:39 - [info] [rpi-gpio out:Relay Heizung Stufe Poti GPIO27-13] out: 1 2024-03-02 20:46:39.877 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:39 - [info] [rpi-gpio out:Relay GPIO05-29] out: 1 2024-03-02 20:46:39.881 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:39 - [info] [rpi-gpio out:Relay GPIO05-29] out: 1 2024-03-02 20:46:40.076 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:40.082 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog.pip.acoutw" has been written without ack-flag with value "1122" 2024-03-02 20:46:44.096 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog2.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:44.101 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog2.pip.acoutw" has been written without ack-flag with value "1110" 2024-03-02 20:46:44.537 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:44 - [info] [rpi-gpio out:GPIO06 - Pin 31 Ansteuerung Zusatzrelais Lüfter (hinter Pi)] out: 0 2024-03-02 20:46:44.878 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:44 - [info] [rpi-gpio out:Relay Heizung Stufe Poti GPIO27-13] out: 1 2024-03-02 20:46:44.883 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:44 - [info] [rpi-gpio out:Relay GPIO05-29] out: 1 2024-03-02 20:46:44.889 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:44 - [info] [rpi-gpio out:Relay GPIO05-29] out: 1 2024-03-02 20:46:44.967 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:45.045 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog.pip.acoutw" has been written without ack-flag with value "1133" 2024-03-02 20:46:49.114 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog2.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:49.168 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog2.pip.acoutw" has been written without ack-flag with value "1138" 2024-03-02 20:46:49.889 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:49 - [info] [rpi-gpio out:Relay Heizung Stufe Poti GPIO27-13] out: 1 2024-03-02 20:46:49.892 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:49 - [info] [rpi-gpio out:Relay GPIO05-29] out: 1 2024-03-02 20:46:49.895 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:49 - [info] [rpi-gpio out:Relay GPIO05-29] out: 1 2024-03-02 20:46:49.941 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:49.953 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog.pip.acoutw" has been written without ack-flag with value "1148" 2024-03-02 20:46:54.068 - info: node-red.0 (2463) State value to set for "node-red.0.solpiplog2.pip.acin" has to be type "string" but received type "number" 2024-03-02 20:46:54.070 - warn: node-red.0 (2463) Read-only state "node-red.0.solpiplog2.pip.acoutw" has been written without ack-flag with value "1144" 2024-03-02 20:46:54.548 - info: node-red.0 (2369) Node-RED: 2 Mar 20:46:54 - [info] [rpi-gpio out:GPIO06 - Pin 31 Ansteuerung Zusatzrelais Lüfter (hinter Pi)] out: 0============ Mark until here for C&P =============
iob diag has finished.
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: Pi400 Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 138 Pending iob updates: 3 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.1 and npm 10.2.4 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 2.0G 1.2G 63M 912M 2.0G Swap: 104M 0B 104M Total: 4.1G 2.0G 1.4G Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 5.0.19 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : Pi400 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : Pi400 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : Pi400 - enabled, port: 8083, bind: 0.0.0.0, run as: admin Objects: 21646 States: 18855 Size of iob-Database: 38M /opt/iobroker/iobroker-data/objects.jsonl 11M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
Nachdem ich Javaspript Instanz aktiviert habe, ist Ram voll gelaufen und Swap Partition auch voll gelaufen. Leider konnte ich nicht mehr stoppen und der Pi ist abgeschmiert. 20 min warten oder Stromversorgung trennen. Ich muss nach Restart gleich wieder die Java Insanz stoppen.
-
@mika-0 sagte in Hilfe! Nach Java Update Skripte 404:
Kernel: aarch64 Userland: armhf
Installier das Betriebssystem NEU als reine 64Bit-Version in der Lite-Variante, ohne Desktop und dem TeamViewer-Quark.
Hau die 138 Updates für das OS rein und die 3 iob-Updates. -
@thomas-braun Ähhhh das geht nicht. Ich habe PV 32bit Programme die eine Desktop Oberfläche benötigen. Um gelegentlich diese PV Programme remote bedienen zu können war früher VNC drauf. Das geht aber nicht bei Bookworm mit 32bit. Daher Teamviewer drauf.
ging das Java schief? Kann ich was machen damit ich das System retten kann?
Aufsetzen auf gleichem Stand vor Update wäre möglich, aber aufwändig -
@mika-0 sagte in Hilfe! Nach Java Update Skripte 404:
Ich habe PV 32bit Programme die eine Desktop Oberfläche benötigen.
Falsches Setup...
-
@thomas-braun Da gibt es leider kein Setup was ich auswählen könnte. Die laufen halt nur auf ner GUI. Die ganze Zeit lief es ja auch stabil. Bis nach dem Update vorhin. Sorry, aber ich bin kein Experte, sonst würde ich hier nicht fragen. Daher nochmal. Kann ich das aktuelle System retten und wenn ja mit welchen Befehlen?
-
Und die beiden ominösen Programme verhindern auch, das du die Kiste auf einem aktuellen Stand hältst?
Da zuerst ran.Sorry, aber ich bin kein Experte
Offenbar nicht. Dann würdest du nämlich nicht so ein strubbeliges System fahren.
-
@thomas-braun Also die OS Updates laufen. Währenddessen.... Was wäre denn aus deiner Sicht ein besseres "Setup"? Lieber die PV Programme auf einem kleinen Pi laufen und iobroker auf dem anderen der direkt neben dran liegt?
Mir war die Reihenfolge nicht bekannt, erst OS Updates, dann iobroker Updates. Kann ich aber gerne in Zukunft so machen.
Gibt es denn eine zeitliche Regel, nach den OS Updates zu suchen? Täglich, weekly?Edit: Von der Leistung des Pi 4 bin ich absolut zufrieden. Da gab es bisher nie irgend eine Performancelücke
-
@mika-0 sagte in Hilfe! Nach Java Update Skripte 404:
Was wäre denn aus deiner Sicht ein besseres "Setup"?
wie oben bereits gesagt: Reines 64Bit-System ohne Desktop-Geraffel.
Mir war die Reihenfolge nicht bekannt, erst OS Updates, dann iobroker Updates.
Wurscht, hauptsache regelmäßig. So alle 2 Wochen.
-
Man erhöht grundsätzlich die Wahrscheinlichkeit auf ein stabiles ioBroker-System, wenn es ein dediziertes System für den ioBroker ist - ohne weitere Software nebenbei (auch wenn es die Performance hergeben würde).
Auf einem dedizierten ioBroker-System läuft dann eben auch keine Desktop-Umgebung.Btw.: ändere bitte mal den Betreff auf "Nach Update des javascript Adapters 404".
Java ist beim ioBroker nämlich irrelevant. -
@mrbungle64 Auch dir Danke für den Input. Muss ich schauen wie ich das HW seitig umsetzen kann. Gerne ändern ich den Betreff, aber wo ist da ein Bearbeiten Button?
& an @Thomas-Braun
OS Updates sind drauf. Der RAM läuft immer noch voll. Kann es sein, dass durch das Update ein Skript schuld sein könnte? Kann man das herausfinden welches es sein könnte?Edit: Thread Titel ändern geschafft.
-
Wäre folgender Vorschlag eine bessere Vorgehensweise mit iobroker:
iobroker auf SSD am Pi 4 mit Bookworm 64bit ohne GUI und steuert auch GPIO PinsPV Programme auf SSD am Pi 3 mit Bookworm / Bullseye 32bit und GUI
Und wo sollte ich dann die Datalogger Grafana / Emoncms laufen lassen? Daten kommen aber von beiden Pi´s
-
Leider kam zu meinem Vorschlag zu einer richtigen Umsetzung kein Vorschlag. Also habe ich es so umgesetzt.
ioBroker ist nun auf einem ganz frischen Raspberry Pi 4 Bookworm 64 bit lite aufgesetzt. Kein Desktop, keiner weiteren Programme.
Ich habe ein älteres backup restored. Zack RAM vollgelaufen und der Pi hat sich aufgehängt.
Ich bin nun trotz Aufwand der letzten Tage keinen Schritt weiter.
@mrbungle64 @Thomas-Braun oder andere Experten. Wer kann mir bitte helfen? -
@mika-0 sagte in Hilfe! Nach Update des javascript Adapters 404:
Zack RAM vollgelaufen
Da wirst du selber ran müssen. Wird wohl ein Skript sein, das da ausflippt.
-
@thomas-braun OK Danke, auf die Idee bin ich auch schon gekommen und deaktiviere alle. Dann wird nach und nach zugeschaltet.
Wenigstens ist der iobroker nun separat zu den PV Programmen, was ja definitiv nicht schaden kann Melde mich wenn ich Erfolg hatte. -
@thomas-braun Also ich habe den info adapter ausfindig gemacht. Seit dem ich den deaktiviert habe, kam der RAM Überlauf nicht mehr. Habe ich deinstalliert.
Nun kam vom Javaskript die Update MeldungDas ging ca, 5 min gut, dann kam es während dem Update zum Überlauf und schlussendlich zum Crash.
Alle anderen Adapter sind aktuell.Kann man aus dem bisschen Text etwas heraus lesen an was das liegen könnte?
-
-
@thomas-braun ```
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Model : Raspberry Pi 400 Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 22:16:22 up 6 min, 2 users, load average: 4.49, 3.59, 1.69 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: ~ Under-voltage detected ~ Arm frequency capped Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred *** Time and Time Zones *** Local time: Thu 2024-03-07 22:16:22 CET Universal time: Thu 2024-03-07 21:16:22 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth gpio i2c spi *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 903M 1.2M 731M 1.6G Swap: 104M 0B 104M Total: 4.1G 2.4G 1.0G 3792 M total memory 2310 M used memory 2347 M active memory 434 M inactive memory 860 M free memory 70 M buffer memory 627 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/sda2 ext4 110G 5.4G 99G 6% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 12K 5.0M 1% /run/lock /dev/sda1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Thu Mar 7 22:09:56 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:16:A9:81 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=8488418b-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Thu Mar 7 22:10:00 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Thu Mar 7 22:10:01 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 523M /var/ 202M /var/cache 197M /var/cache/apt 164M /var/lib 132M /var/lib/apt/lists Archived and active journals take up 55.6M in the file system. /opt/iobroker/backups: 29M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 808M /opt/iobroker/iobroker-data/ 730M /opt/iobroker/iobroker-data/files 142M /opt/iobroker/iobroker-data/files/vis-2 81M /opt/iobroker/iobroker-data/files/vis-2/static 80M /opt/iobroker/iobroker-data/files/vis-2/static/js The five largest files in iobroker-data are: 51M /opt/iobroker/iobroker-data/objects.jsonl 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 36M /opt/iobroker/iobroker-data/files/telegram-menu.admin/build/index.js.map 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 21M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! extraneous: @types/caseless@0.12.5 /opt/iobroker/node_modules/@types/caseless npm ERR! extraneous: @types/request@2.48.12 /opt/iobroker/node_modules/@types/request npm ERR! extraneous: @types/tough-cookie@4.0.5 /opt/iobroker/node_modules/@types/tough-cookie npm ERR! extraneous: coffeescript@2.7.0 /opt/iobroker/node_modules/coffeescript npm ERR! extraneous: jsonata@2.0.4 /opt/iobroker/node_modules/jsonata npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: typescript@5.3.3 /opt/iobroker/node_modules/typescript npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! extraneous: form-data@2.5.1 /opt/iobroker/node_modules/@types/request/node_modules/form-data npm ERR! extraneous: @types/iobroker@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/iobroker npm ERR! extraneous: @types/linkify-it@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/linkify-it npm ERR! extraneous: @types/mdurl@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/mdurl npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/virtual-tsc/node_modules/debug npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/virtual-tsc/node_modules/ms npm ERR! invalid: asynckit@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/asynckit npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-03-07T21_16_55_302Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : iobroker - disabled system.adapter.alias-manager.0 : alias-manager : iobroker - disabled system.adapter.asterisk.0 : asterisk : iobroker - disabled, port: 5038 system.adapter.awattar.0 : awattar : iobroker - disabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.countdown.0 : countdown : iobroker - disabled system.adapter.daswetter.0 : daswetter : iobroker - enabled system.adapter.discovery.0 : discovery : iobroker - disabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.enigma2.0 : enigma2 : iobroker - enabled + system.adapter.enigma2.1 : enigma2 : iobroker - enabled system.adapter.feiertage.0 : feiertage : iobroker - enabled + system.adapter.harmony.0 : harmony : iobroker - enabled + system.adapter.history.0 : history : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : iobroker - disabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - disabled system.adapter.icons-material-svg.0 : icons-material-svg : iobroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker - disabled + system.adapter.jarvis.0 : jarvis : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.material.0 : material : iobroker - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.pollenflug.0 : pollenflug : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.s7.0 : s7 : iobroker - enabled + system.adapter.s7.1 : s7 : iobroker - enabled + system.adapter.s7.2 : s7 : iobroker - enabled system.adapter.scheduler.0 : scheduler : iobroker - disabled system.adapter.shuttercontrol.0 : shuttercontrol : iobroker - disabled system.adapter.solarwetter.0 : solarwetter : iobroker - enabled system.adapter.telegram-menu.0 : telegram-menu : iobroker - disabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.terminal.0 : terminal : iobroker - disabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command : iobroker - enabled system.adapter.tibberlink.0 : tibberlink : iobroker - disabled system.adapter.time-switch.0 : time-switch : iobroker - disabled + system.adapter.tr-064.0 : tr-064 : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled system.adapter.vis-2.0 : vis-2 : iobroker - disabled system.adapter.vis-bars.0 : vis-bars : iobroker - disabled system.adapter.vis-history.0 : vis-history : iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - disabled system.adapter.vis-metro.0 : vis-metro : iobroker - disabled system.adapter.vis-players.0 : vis-players : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - enabled system.adapter.weatherunderground.0 : weatherunderground : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobroker - enabled, port: 8083, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobroker - enabled, port: 8083, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "awattar" : 1.0.6 , installed 1.0.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "countdown" : 2.2.0 , installed 2.2.0 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "enigma2" : 2.0.5 , installed 2.0.5 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "harmony" : 1.3.0 , installed 1.3.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mihome-vacuum": 4.1.1 , installed 4.1.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.1.0 , installed 5.1.0 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "s7" : 1.4.2 , installed 1.4.2 Adapter "scheduler" : 1.1.9 , installed 1.1.9 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "solarwetter" : 1.1.5 , installed 1.1.5 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "telegram-menu": 1.5.1 , installed 1.5.1 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 2.2.2 , installed 2.2.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "ws" : 2.5.10 , installed 2.5.10 Objects and States Please stand by - This may take a while Objects: 19580 States: 17301 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 21187 1360/node-red tcp 0 0 0.0.0.0:56101 0.0.0.0:* LISTEN 103 21179 1525/rpc.statd tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 22118 1481/io.jarvis.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 21151 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16500 708/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 13869 695/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 13907 695/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1000 18272 979/io.admin.0 tcp6 0 0 :::8083 :::* LISTEN 1000 23665 1617/io.web.1 tcp6 0 0 :::8082 :::* LISTEN 1000 22918 1610/io.web.0 tcp6 0 0 :::42753 :::* LISTEN 103 21183 1525/rpc.statd tcp6 0 0 :::61991 :::* LISTEN 1000 23576 1463/io.harmony.0 tcp6 0 0 :::111 :::* LISTEN 0 21155 1/init tcp6 0 0 :::22 :::* LISTEN 0 16502 708/sshd: /usr/sbin udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 23577 1463/io.harmony.0 udp 0 0 0.0.0.0:39575 0.0.0.0:* 104 14516 504/avahi-daemon: r udp 0 0 127.0.0.1:854 0.0.0.0:* 0 21173 1525/rpc.statd udp 0 0 192.168.2.40:5353 0.0.0.0:* 1000 22893 1352/io.tr-064.0 udp 0 0 192.168.2.4:5353 0.0.0.0:* 1000 22892 1352/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14514 504/avahi-daemon: r udp 0 0 0.0.0.0:53294 0.0.0.0:* 103 21177 1525/rpc.statd udp 0 0 0.0.0.0:111 0.0.0.0:* 0 21153 1/init udp 0 0 0.0.0.0:53421 0.0.0.0:* 1000 19034 1169/io.mihome-vacu udp6 0 0 fe80::1cf:9104:829e:546 :::* 0 16573 633/NetworkManager udp6 0 0 fe80::4419:5dba:1b6:546 :::* 0 16132 633/NetworkManager udp6 0 0 :::5353 :::* 104 14515 504/avahi-daemon: r udp6 0 0 :::54748 :::* 104 14517 504/avahi-daemon: r udp6 0 0 :::57020 :::* 103 21181 1525/rpc.statd udp6 0 0 :::111 :::* 0 21157 1/init *** Log File - Last 25 Lines *** 2024-03-07 22:19:27.121 - info: javascript.0 (1676) script.js.SynologyPhotos.Photos_zählen: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:27.123 - info: javascript.0 (1676) Start javascript script.js.System.Neustart_Fritzbox 2024-03-07 22:19:27.146 - info: javascript.0 (1676) script.js.System.Neustart_Fritzbox: registered 1 subscription, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:27.147 - info: javascript.0 (1676) Start javascript script.js.System.Partition_Kamera_reinigen 2024-03-07 22:19:27.185 - info: javascript.0 (1676) script.js.System.Partition_Kamera_reinigen: registered 1 subscription, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:27.186 - info: javascript.0 (1676) Start javascript script.js.System.Pi_einmalig_neustarten 2024-03-07 22:19:27.248 - info: javascript.0 (1676) script.js.System.Pi_einmalig_neustarten: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:27.705 - warn: javascript.0 (1676) script.js.Fritzbox.Klingel_Bild_Telegram: Fehler beim Bild speichern: Error: ENOENT: no such file or directory, open '/home/iobroker/Kamera/Klingel/Klingel_0.jpg' 2024-03-07 22:19:29.249 - info: javascript.0 (1676) Start javascript script.js.System.Speicherplatz_umrechnen 2024-03-07 22:19:29.266 - info: javascript.0 (1676) script.js.System.Speicherplatz_umrechnen: registered 2 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.268 - info: javascript.0 (1676) Start javascript script.js.System.Uptime 2024-03-07 22:19:29.330 - info: javascript.0 (1676) script.js.System.Uptime: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.332 - info: javascript.0 (1676) Start javascript script.js.System.Vis_Funktions_Buttons 2024-03-07 22:19:29.433 - info: javascript.0 (1676) script.js.System.Vis_Funktions_Buttons: registered 14 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.434 - info: javascript.0 (1676) Start javascript script.js.Telegram.Briefkasten_Bild_Telegram 2024-03-07 22:19:29.570 - info: javascript.0 (1676) script.js.Telegram.Briefkasten_Bild_Telegram: registered 1 subscription, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.572 - info: javascript.0 (1676) Start javascript script.js.Telegram.Telegram-Menu.HILFE_ANLEITUNG 2024-03-07 22:19:29.587 - info: javascript.0 (1676) script.js.Telegram.Telegram-Menu.HILFE_ANLEITUNG: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.588 - info: javascript.0 (1676) Start javascript script.js.Telegram.Telegram-Menu.Start-Menu 2024-03-07 22:19:29.609 - info: javascript.0 (1676) script.js.Telegram.Telegram-Menu.Start-Menu: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.611 - info: javascript.0 (1676) Start javascript script.js.Visualisierung.MyMüll 2024-03-07 22:19:29.641 - info: javascript.0 (1676) script.js.Visualisierung.MyMüll: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:29.643 - info: javascript.0 (1676) Start javascript script.js.Visualisierung.Vis_Änderung_Telegram 2024-03-07 22:19:29.659 - info: javascript.0 (1676) script.js.Visualisierung.Vis_Änderung_Telegram: registered 1 subscription, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-03-07 22:19:30.266 - warn: javascript.0 (1676) script.js.Telegram.Briefkasten_Bild_Telegram: Fehler beim Bild speichern: Error: ENOENT: no such file or directory, open '/home/iobroker/Kamera/Briefkasten/Briefkasten_0.jpg'============ Mark until here for C&P =============
-
Besorg dir ein stabileres Netzteil.
Und schau nach asynckit. Das Modul ist falsch installiert, installier das nochmal. Oder den javaskript-Adapter. Jenachdem wo es genau klemmt.
cd /opt/iobroker npm ls asynckit@ -
@thomas-braun @thomas-braun sagte in Hilfe! Nach Update des javascript Adapters 404:
cd /opt/iobroker
npm ls asynckit@Das mit dem Netzteil habe ich auch gelesen. Das war im Kauf Bundle damals dabei (ist ein originales) OK dann muss ein neues her, habe vorübergehend ein anderes genommen, das zeigt bei nochmaligem Durchlauf von iob diag keinen Fehler an.
Danke der Info, hier das Ergebnis:
npm ls asynckit@ iobroker.inst@3.0.0 /opt/iobroker ├─┬ @types/request@2.48.12 extraneous │ └─┬ form-data@2.5.1 extraneous │ └── asynckit@0.4.0 ├─┬ iobroker.admin@6.13.16 │ └─┬ axios@1.6.7 │ └─┬ form-data@4.0.0 │ └── asynckit@0.4.0 deduped ├─┬ iobroker.javascript@7.8.0 │ ├─┬ @types/request@2.48.12 │ │ └─┬ form-data@2.5.1 │ │ └── asynckit@0.4.0 │ ├─┬ axios@1.6.7 │ │ └─┬ form-data@4.0.0 │ │ └── asynckit@0.4.0 │ └─┬ request@2.88.2 │ └─┬ form-data@2.3.3 │ └── asynckit@0.4.0 ├─┬ iobroker.mihome-vacuum@4.1.1 │ └─┬ request@2.88.2 │ └─┬ form-data@2.3.3 │ └── asynckit@0.4.0 deduped └─┬ iobroker.telegram@3.1.0 └─┬ node-telegram-bot-api@0.64.0 └─┬ @cypress/request@3.0.1 └─┬ form-data@2.3.3 └── asynckit@0.4.0 dedupedAlso von einem asynckit habe ich noch nichts gelesen, was das ist oder wozu ich das installiert haben könnte.
Kann man daran erkennen ob ein asynckit oder javaskript fehlerhaft installiert wurden und ein Hinweis wäre nett, wie ich das neu installieren kann. Ich möchte nichts falsches drücken. Besten Dank vorab.
