UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Meister Mopper]

@phantomkommander sagte in Zigbee Stick spinnt:

ah ok, hatte ich nicht mitbekommen.

Das udev Problem hatte ich auch, allerdings auf einem bullseye 32-Bit System auf dem Raspberrypi.
Seit 64-Bit bookworm ist das Geschichte. :blush:

[gluecksmann]

@meister-mopper

Konsole will er scheinbar nicht... sagt das es schon installiert ist... Die Kachel habe ich merkwürdigerweise nicht...

[Meister Mopper]

@gluecksmann sagte in Zigbee Stick spinnt:

onsole will er scheinbar nicht...

Das scheint ein Verständnisproblem zu sein. Mit Konsole meine ich über ssh (Putty oder sonstwas) auf dem iob-Server einloggen und den Befehl eingeben.

[gluecksmann]

@meister-mopper

adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version.

[reutli]

@gluecksmann

Bitte immer komplette Ein- und Ausgaben der Konsole in CodeTags sonst kann hier keiner sehen, was Du machst und was das Ergebnis ist!

[Meister Mopper]

@gluecksmann sagte in Zigbee Stick spinnt:

Use "upgrade" to upgrade to a newer version.

Dann versuch mal
iobroker upgrade zigbee@1.8.24 , steht ja da.

[gluecksmann]

@reutli

pi@raspberrypi:~ $ iobroker install zigbee@1.8.24
adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version.

[gluecksmann]

@meister-mopper

Manchmal ist es lo einfach... mal sehen ob das die Probleme löst...

aktuell installiert er noch... beunruhigend lange...

[gluecksmann]

@gluecksmann

So, nun komme ich leider nicht mehr an die Hauptseite vom IOBroker ran...per Putty scheint es noch erreichbar zu sein...

Jemand einen hilfreichen Befehl?

[amg_666]

@gluecksmann sagte in Zigbee Stick spinnt:

So, nun komme ich leider nicht mehr an die Hauptseite vom IOBroker ran.

und was heisst das? Welche Fehlermeldung bekommst du?

[gluecksmann]

@amg_666

Firefox kann keine Verbindung zu dem Server unter 192.168.2.105:8081 aufbauen.

[Frank579]

@gluecksmann

Was sagt denn iob diag dazu läuft der Admin ?

[gluecksmann]

@frank579 sagte in Zigbee Stick spinnt:

iob diag

Core adapters versions
js-controller:  5.0.17
admin:          "admin" not found
javascript:     "javascript" not found

[Glasfaser]

@gluecksmann

Zeige mal bitte die Ganze Full ausgabe davon , nicht nur ein Schnipsel , sieht schon merkwürdig aus .

vorher noch

sudo reboot

dann

iob diag

[gluecksmann]

@glasfaser

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 14:15:23 up 3 min,  1 user,  load average: 1.50, 1.08, 0.47
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-12-28 14:15:23 CET
           Universal time: Thu 2023-12-28 13:15:23 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        6.4G        8.0M        316M        6.5G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        6.5G

         7898 M total memory
         1153 M used memory
          149 M active memory
         1229 M inactive memory
         6428 M free memory
           53 M buffer memory
          263 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT            LOAD   ACTIVE SUB    DESCRIPTION
* lightdm.service loaded failed failed Light Display Manager

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   14G   15G  50% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  8.5M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Dec 28 14:11:43 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Dec 28 14:11:44 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Dec 28 14:11:44 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Dec 28 14:11:46 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
412M    /var/
118M    /var/lib
102M    /var/cache
90M     /var/cache/apt
89M     /var/log

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
60M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
616M    /opt/iobroker/iobroker-data/
329M    /opt/iobroker/iobroker-data/files
143M    /opt/iobroker/iobroker-data/backup-objects
93M     /opt/iobroker/iobroker-data/sonosCache
67M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
15M     /opt/iobroker/iobroker-data/objects.jsonl
12M     /opt/iobroker/iobroker-data/objects.json.migrated

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee
npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T13_15_38_542Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     7.1.6

npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee
npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T13_16_01_385Z-debug-0.log
Adapters from github:   2

Adapter State
  system.adapter.admin.0                  : admin                 : raspberrypi                              - disabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
  system.adapter.awtrix-light.0           : awtrix-light          : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.ble.0                    : ble                   : raspberrypi                              -  enabled
  system.adapter.chromecast.0             : chromecast            : raspberrypi                              - disabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
  system.adapter.devices.0                : devices               : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
+ system.adapter.govee.0                  : govee                 : raspberrypi                              -  enabled
+ system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              -  enabled
  system.adapter.history.0                : history               : raspberrypi                              - disabled
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : raspberrypi                              - disabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.meross.0                 : meross                : raspberrypi                              -  enabled
+ system.adapter.mielecloudservice.0      : mielecloudservice     : raspberrypi                              -  enabled
+ system.adapter.musiccast.0              : musiccast             : raspberrypi                              -  enabled
+ system.adapter.net-tools.0              : net-tools             : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.philips-air.0            : philips-air           : raspberrypi                              -  enabled
+ system.adapter.philips-air.1            : philips-air           : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.shuttercontrol.0         : shuttercontrol        : raspberrypi                              - disabled
+ system.adapter.smartcontrol.0           : smartcontrol          : raspberrypi                              -  enabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              -  enabled
  system.adapter.vis-players.0            : vis-players           : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                 : zigbee                : raspberrypi                              - disabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.26.3   , installed 3.26.3
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awtrix-light" : 0.10.0   , installed 0.10.0
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "ble"          : 0.13.4   , installed 0.13.4
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.11   , installed 3.1.11
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "fullybrowser" : 3.0.6    , installed 3.0.6
Adapter    "gruenbeck"    : 0.0.42   , installed 0.0.42
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hue"          : 3.10.1   , installed 3.10.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "mielecloudservice": 6.5.4, installed 6.5.4
Adapter    "mihome-vacuum": 4.1.0    , installed 4.1.0
Adapter    "musiccast"    : 1.1.3    , installed 1.1.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "philips-air"  : 1.0.3    , installed 1.0.3
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "shuttercontrol": 1.6.3   , installed 1.6.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "trashschedule": 2.3.0    , installed 2.3.0
Adapter    "tuya"         : 3.14.2   , installed 3.14.2
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 1.0.0    , installed 1.0.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.6.0, installed 3.6.0
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "zigbee"       : 1.8.25   , installed 1.8.25

Objects and States
Please stand by - This may take a while
Objects:        11295
States:         9361

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          18008      642/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          14831      363/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       20705      999/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       18400      632/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       19317      632/iobroker.js-con
tcp6       0      0 :::22                   :::*                    LISTEN      0          18010      642/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          14830      363/cupsd
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       21820      980/io.sonos.0
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       19741      1036/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       19742      1036/io.tuya.0
udp        0      0 0.0.0.0:37928           0.0.0.0:*                           1001       21652      911/io.philips-air.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       21575      856/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          18449      631/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          16300      460/cups-browsed
udp        0      0 0.0.0.0:41100           0.0.0.0:*                           1001       24005      1320/io.musiccast.0
udp        0      0 0.0.0.0:60062           0.0.0.0:*                           108        17435      356/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        17433      356/avahi-daemon: r
udp        0    704 0.0.0.0:48886           0.0.0.0:*                           1001       21952      1017/io.philips-air
udp6       0      0 :::546                  :::*                                0          18466      631/dhcpcd
udp6       0      0 :::5353                 :::*                                108        17434      356/avahi-daemon: r
udp6       0      0 :::39823                :::*                                108        17436      356/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-12-28 14:14:31.136  - info: philips-air.0 (911) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string"
2023-12-28 14:14:31.153  - info: philips-air.0 (911) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string"
2023-12-28 14:14:31.159  - info: philips-air.0 (911) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string"
2023-12-28 14:14:31.175  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string"
2023-12-28 14:14:31.181  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 14:14:31.187  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 14:14:43.281  - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username
2023-12-28 14:15:00.131  - info: host.raspberrypi instance system.adapter.dwd.0 started with pid 3526
2023-12-28 14:15:03.497  - info: dwd.0 (3526) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17
2023-12-28 14:15:04.149  - info: host.raspberrypi instance system.adapter.daswetter.0 started with pid 3748
2023-12-28 14:15:05.756  - info: dwd.0 (3526) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-12-28 14:15:06.406  - info: host.raspberrypi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-12-28 14:15:08.046  - info: daswetter.0 (3748) starting. Version 3.1.11 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.19.0, js-controller: 5.0.17
2023-12-28 14:15:08.160  - info: host.raspberrypi instance system.adapter.weatherunderground.0 started with pid 3830
2023-12-28 14:15:12.777  - info: weatherunderground.0 (3830) starting. Version 3.6.0 in /opt/iobroker/node_modules/iobroker.weatherunderground, node: v18.19.0, js-controller: 5.0.17
2023-12-28 14:15:16.942  - error: weatherunderground.0 (3830) no observations in response from https://api.weather.com/v3/wx/observations/current?apiKey=e1f10a1e78da46f5b10a1e78da96f525&geocode=0%2C0&units=m&language=de&format=json
2023-12-28 14:15:17.338  - error: weatherunderground.0 (3830) WUnderground reported an error: --/{"message":"connect ECONNREFUSED 127.0.0.1:80","name":"Error","stack":"Error: connect ECONNREFUSED 127.0.0.1:80\n    at Function.AxiosError.from (/opt/iobroker/node_modules/axios/lib/core/AxiosError.js:89:14)\n    at RedirectableRequest.handleRequestError (/opt/iobroker/node_modules/axios/lib/adapters/http.js:606:25)\n    at RedirectableRequest.emit (node:events:529:35)\n    at RedirectableRequest.emit (node:domain:489:12)\n    at ClientRequest.eventHandlers.<computed> (/opt/iobroker/node_modules/follow-redirects/index.js:14:24)\n    at ClientRequest.emit (node:events:529:35)\n    at ClientRequest.emit (node:domain:489:12)\n    at Socket.socketErrorListener (node:_http_client:501:9)\n    at Socket.emit (node:events:517:28)\n    at Socket.emit (node:domain:489:12)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":15000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8","User-Agent":"Mozilla/5.0 (Windows) Gecko/20100101 Firefox/68.0","Accept-Language":"de-DE,de;q=0.8,en-US;q=0.5,en;q=0.3","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","url":""},"code":"ECONNREFUSED","status":null}
2023-12-28 14:15:17.344  - error: weatherunderground.0 (3830) No current observation data found in response
2023-12-28 14:15:19.147  - error: weatherunderground.0 (3830) No forecast data found in response
2023-12-28 14:15:21.159  - info: weatherunderground.0 (3830) Terminated (NO_ERROR): Without reason
2023-12-28 14:15:21.703  - info: host.raspberrypi instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR)
2023-12-28 14:15:25.601  - info: daswetter.0 (3748) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2023-12-28 14:15:26.119  - info: daswetter.0 (3748) cleaned everything up...
2023-12-28 14:15:26.137  - info: host.raspberrypi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-12-28 14:16:48.051  - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username

[Glasfaser]

@gluecksmann

iob admin start

[Thomas Braun]

@gluecksmann

sudo systemctl set-default multi-user.target

Installier die nochmal:

npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee
npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png

Und dein Betriebssystem ist tot. Installier da was lebendiges.

[gluecksmann]

@thomas-braun sagte in Zigbee Stick spinnt:

sudo systemctl set-default multi-user.target

Hallo, wie DU siehst bin ich da nicht wirklich geschickt... Eine komplette Neuinstallation würde das Forum überfordern... Wenn dann bräuchte ich da auf anderem Wege Support. Komme leider immer noch nicht an die Admin Seite

[Thomas Braun]

@gluecksmann

Backup nach extern ziehen, Neuinstallation danach:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
Backup wieder einspielen. Fertig.

[gluecksmann]

@thomas-braun

Da gibt es ja scheibar mehrere Verisionen..... Was genau ist denn bei mir alt? Mache doch immer Updates? Und wie man ein Update extern sichert habe ich auch noch nicht raus...