NEWS
Zigbee Stick spinnt *gelöst*
Hardware
78
Beiträge
8
Kommentatoren
5.9k
Aufrufe
8
Watching
-
@gluecksmann sagte in Zigbee Stick spinnt:
/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00
Dieser Hinweis kommt, wenn keine Verbindung zum USB-Stick möglich ist. Versuch mal
/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00als COM-Anschlussname einzutragen.
Bei mir muss teilweise der Adapter mehrmals neu gestartet werden, bis es funktioniert.
- Zudem reitest du mit Debian buster einen toten Gaul. Installier das aktuelle 64-bit bookworm lite Image.
- Dein govee-Adapter muckt rum
@meister-mopper sagte in Zigbee Stick spinnt:
/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00
Hallo,
hab es eingetragen...Adapter..Raspberry mehrmals neu gestartet...kein Erfolg...
-
Guten Morgen Forum, wenn ich die Instanz des Zigbee aufrufe, kommt diese Fehlermeldung.
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 05:52:39 up 8:04, 1 user, load average: 1.01, 0.86, 0.71 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2023-12-26 05:52:40 CET Universal time: Tue 2023-12-26 04:52:40 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.6G 4.2G 32M 2.0G 6.0G Swap: 99M 0B 99M Total: 8.0G 1.6G 4.3G 7898 M total memory 1632 M used memory 380 M active memory 3078 M inactive memory 4233 M free memory 192 M buffer memory 1840 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 14G 15G 50% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 33M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 25 21:47:50 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Dec 25 21:47:51 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Mon Dec 25 21:47:51 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 25 21:47:53 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 407M /var/ 118M /var/lib 102M /var/cache 90M /var/cache/apt 85M /var/log Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 60M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 621M /opt/iobroker/iobroker-data/ 329M /opt/iobroker/iobroker-data/files 143M /opt/iobroker/iobroker-data/backup-objects 93M /opt/iobroker/iobroker-data/sonosCache 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 12M /opt/iobroker/iobroker-data/objects.json.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-26T04_52_49_143Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-26T04_53_11_135Z-debug-0.log Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.ble.0 : ble : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.govee.0 : govee : raspberrypi - enabled + system.adapter.gruenbeck.0 : gruenbeck : raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : raspberrypi - enabled + system.adapter.musiccast.0 : musiccast : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.philips-air.0 : philips-air : raspberrypi - enabled + system.adapter.philips-air.1 : philips-air : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - disabled + system.adapter.smartcontrol.0 : smartcontrol : raspberrypi - enabled + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyACM0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 0.10.0 , installed 0.10.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fullybrowser" : 3.0.6 , installed 3.0.6 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "philips-air" : 1.0.3 , installed 1.0.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "shuttercontrol": 1.6.3 , installed 1.6.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "trashschedule": 2.3.0 , installed 2.3.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.0.0 , installed 1.0.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.25 , installed 1.8.25 Objects and States Please stand by - This may take a while Objects: 11301 States: 9374 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19502 650/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 775037 2448/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21081 1074/io.sonoff.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19713 642/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19706 642/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1001 18097 762/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 26014 2151/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 19504 650/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 775036 2448/cupsd tcp6 0 0 :::3500 :::* LISTEN 1001 20991 1056/io.sonos.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 20223 1112/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 20224 1112/io.tuya.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 19939 894/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15322 639/dhcpcd udp 0 0 0.0.0.0:40006 0.0.0.0:* 1001 20196 1092/io.philips-air udp 0 0 0.0.0.0:56941 0.0.0.0:* 108 15073 397/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 773958 2449/cups-browsed udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 24729 1340/io.musiccast.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15071 397/avahi-daemon: r udp 0 0 0.0.0.0:39675 0.0.0.0:* 1001 19387 970/io.philips-air. udp6 0 0 :::54275 :::* 108 15074 397/avahi-daemon: r udp6 0 0 :::546 :::* 0 17520 639/dhcpcd udp6 0 0 :::5353 :::* 108 15072 397/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-26 05:53:28.566 - info: philips-air.0 (970) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string" 2023-12-26 05:53:28.626 - info: philips-air.0 (970) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string" 2023-12-26 05:53:28.652 - info: philips-air.0 (970) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string" 2023-12-26 05:53:28.699 - info: philips-air.0 (970) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string" 2023-12-26 05:53:28.715 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string" 2023-12-26 05:53:28.790 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:53:28.797 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:53:36.263 - error: govee.0 (1253) AxiosError: Request failed with status code 429 2023-12-26 05:53:39.973 - error: philips-air.1 (1092) Error by sending: Error: No reply in 247 seconds. 2023-12-26 05:53:51.400 - error: govee.0 (1253) AxiosError: Request failed with status code 429 2023-12-26 05:53:56.958 - warn: sonoff.0 (1074) Client [tasmota2] has invalid password or username 2023-12-26 05:54:06.383 - error: govee.0 (1253) AxiosError: Request failed with status code 429 2023-12-26 05:54:09.974 - error: philips-air.1 (1092) Error by sending: Error: No reply in 247 seconds. 2023-12-26 05:54:14.574 - info: philips-air.0 (970) State value to set for "philips-air.0.control.lightBrightness" has to be type "number" but received type "string" 2023-12-26 05:54:14.581 - info: philips-air.0 (970) State value to set for "philips-air.0.control.airQualityNotificationThreshold" has to be type "number" but received type "string" 2023-12-26 05:54:14.615 - info: philips-air.0 (970) State value to set for "philips-air.0.status.allergenIndex" has to be type "number" but received type "string" 2023-12-26 05:54:14.669 - info: philips-air.0 (970) State value to set for "philips-air.0.control.childLock" has to be type "boolean" but received type "string" 2023-12-26 05:54:14.740 - info: philips-air.0 (970) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string" 2023-12-26 05:54:14.798 - info: philips-air.0 (970) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string" 2023-12-26 05:54:14.822 - info: philips-air.0 (970) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string" 2023-12-26 05:54:14.832 - info: philips-air.0 (970) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string" 2023-12-26 05:54:14.889 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string" 2023-12-26 05:54:14.896 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:54:14.903 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:54:21.397 - error: govee.0 (1253) AxiosError: Request failed with status code 429Buster ist tot, installier da ganz NEU!
ein Raspberry OS 12 'Bookworm' in der 64Bit Lite Version. -
Buster ist tot, installier da ganz NEU!
ein Raspberry OS 12 'Bookworm' in der 64Bit Lite Version.Ich glaube das wäre für das Forum zuviel... Wenn dann bräuchte ich einen persönlichen 1:1 Support...
Aber das kann ja nicht das Problem mit dem Zigbee sein, oder?
-
Ich glaube das wäre für das Forum zuviel... Wenn dann bräuchte ich einen persönlichen 1:1 Support...
Aber das kann ja nicht das Problem mit dem Zigbee sein, oder?
Nee, das ist ein grundsätzliches Problem.
-
Nee, das ist ein grundsätzliches Problem.
Also so ganz kann ich den Fehler nicht verstehen...einige Zigbee Komponenten funktionieren normal... In der Geräteansicht ändert sich sogar der Status der nicht funktionierenden Geräte wenn ich sie z.B. über Alexa schalte...aber Hardwareseitig passiert nix..
-
Guten Morgen Forum, wenn ich die Instanz des Zigbee aufrufe, kommt diese Fehlermeldung.
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 05:52:39 up 8:04, 1 user, load average: 1.01, 0.86, 0.71 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2023-12-26 05:52:40 CET Universal time: Tue 2023-12-26 04:52:40 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.6G 4.2G 32M 2.0G 6.0G Swap: 99M 0B 99M Total: 8.0G 1.6G 4.3G 7898 M total memory 1632 M used memory 380 M active memory 3078 M inactive memory 4233 M free memory 192 M buffer memory 1840 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 14G 15G 50% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 33M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 25 21:47:50 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Dec 25 21:47:51 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Mon Dec 25 21:47:51 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 25 21:47:53 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 407M /var/ 118M /var/lib 102M /var/cache 90M /var/cache/apt 85M /var/log Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 60M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 621M /opt/iobroker/iobroker-data/ 329M /opt/iobroker/iobroker-data/files 143M /opt/iobroker/iobroker-data/backup-objects 93M /opt/iobroker/iobroker-data/sonosCache 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 12M /opt/iobroker/iobroker-data/objects.json.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-26T04_52_49_143Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-26T04_53_11_135Z-debug-0.log Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.ble.0 : ble : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.govee.0 : govee : raspberrypi - enabled + system.adapter.gruenbeck.0 : gruenbeck : raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : raspberrypi - enabled + system.adapter.musiccast.0 : musiccast : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.philips-air.0 : philips-air : raspberrypi - enabled + system.adapter.philips-air.1 : philips-air : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - disabled + system.adapter.smartcontrol.0 : smartcontrol : raspberrypi - enabled + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyACM0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 0.10.0 , installed 0.10.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fullybrowser" : 3.0.6 , installed 3.0.6 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "philips-air" : 1.0.3 , installed 1.0.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "shuttercontrol": 1.6.3 , installed 1.6.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "trashschedule": 2.3.0 , installed 2.3.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.0.0 , installed 1.0.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.25 , installed 1.8.25 Objects and States Please stand by - This may take a while Objects: 11301 States: 9374 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19502 650/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 775037 2448/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21081 1074/io.sonoff.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19713 642/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19706 642/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1001 18097 762/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 26014 2151/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 19504 650/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 775036 2448/cupsd tcp6 0 0 :::3500 :::* LISTEN 1001 20991 1056/io.sonos.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 20223 1112/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 20224 1112/io.tuya.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 19939 894/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15322 639/dhcpcd udp 0 0 0.0.0.0:40006 0.0.0.0:* 1001 20196 1092/io.philips-air udp 0 0 0.0.0.0:56941 0.0.0.0:* 108 15073 397/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 773958 2449/cups-browsed udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 24729 1340/io.musiccast.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15071 397/avahi-daemon: r udp 0 0 0.0.0.0:39675 0.0.0.0:* 1001 19387 970/io.philips-air. udp6 0 0 :::54275 :::* 108 15074 397/avahi-daemon: r udp6 0 0 :::546 :::* 0 17520 639/dhcpcd udp6 0 0 :::5353 :::* 108 15072 397/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-26 05:53:28.566 - info: philips-air.0 (970) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string" 2023-12-26 05:53:28.626 - info: philips-air.0 (970) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string" 2023-12-26 05:53:28.652 - info: philips-air.0 (970) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string" 2023-12-26 05:53:28.699 - info: philips-air.0 (970) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string" 2023-12-26 05:53:28.715 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string" 2023-12-26 05:53:28.790 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:53:28.797 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:53:36.263 - error: govee.0 (1253) AxiosError: Request failed with status code 429 2023-12-26 05:53:39.973 - error: philips-air.1 (1092) Error by sending: Error: No reply in 247 seconds. 2023-12-26 05:53:51.400 - error: govee.0 (1253) AxiosError: Request failed with status code 429 2023-12-26 05:53:56.958 - warn: sonoff.0 (1074) Client [tasmota2] has invalid password or username 2023-12-26 05:54:06.383 - error: govee.0 (1253) AxiosError: Request failed with status code 429 2023-12-26 05:54:09.974 - error: philips-air.1 (1092) Error by sending: Error: No reply in 247 seconds. 2023-12-26 05:54:14.574 - info: philips-air.0 (970) State value to set for "philips-air.0.control.lightBrightness" has to be type "number" but received type "string" 2023-12-26 05:54:14.581 - info: philips-air.0 (970) State value to set for "philips-air.0.control.airQualityNotificationThreshold" has to be type "number" but received type "string" 2023-12-26 05:54:14.615 - info: philips-air.0 (970) State value to set for "philips-air.0.status.allergenIndex" has to be type "number" but received type "string" 2023-12-26 05:54:14.669 - info: philips-air.0 (970) State value to set for "philips-air.0.control.childLock" has to be type "boolean" but received type "string" 2023-12-26 05:54:14.740 - info: philips-air.0 (970) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string" 2023-12-26 05:54:14.798 - info: philips-air.0 (970) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string" 2023-12-26 05:54:14.822 - info: philips-air.0 (970) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string" 2023-12-26 05:54:14.832 - info: philips-air.0 (970) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string" 2023-12-26 05:54:14.889 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string" 2023-12-26 05:54:14.896 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:54:14.903 - info: philips-air.0 (970) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-26 05:54:21.397 - error: govee.0 (1253) AxiosError: Request failed with status code 429@gluecksmann sagte in Zigbee Stick spinnt:
Adapter "zigbee" : 1.8.25 , installed 1.8.25
Geh mal auf den 1.8.24 zurück, da gibt es im Forum mittlerweile mehrere Beiträge. Da ist noch was buggy.
Proxmox und HA
-
@gluecksmann sagte in Zigbee Stick spinnt:
Adapter "zigbee" : 1.8.25 , installed 1.8.25
Geh mal auf den 1.8.24 zurück, da gibt es im Forum mittlerweile mehrere Beiträge. Da ist noch was buggy.
@meister-mopper Ähm..und das mache ich wie??
-
@meister-mopper Ähm..und das mache ich wie??
@gluecksmann indem du im Reiter Adapter auf die Zigbee Kachel klickst und da unten rechts auf das Plus klickst, dann kannst du eine bestimmte Version auswählen
-
@gluecksmann sagte in Zigbee Stick spinnt:
Adapter "zigbee" : 1.8.25 , installed 1.8.25
Geh mal auf den 1.8.24 zurück, da gibt es im Forum mittlerweile mehrere Beiträge. Da ist noch was buggy.
@meister-mopper gab es nicht auch mal ein Fehler, bei dem der Stick nicht mehr richtig erkannt wurde?
-
@meister-mopper Ähm..und das mache ich wie??
@gluecksmann sagte in Zigbee Stick spinnt:
Ähm..und das mache ich wie??
Oder über die Konsole:
iobroker install zigbee@1.8.24 -
@meister-mopper gab es nicht auch mal ein Fehler, bei dem der Stick nicht mehr richtig erkannt wurde?
Ja, das Problem mit udev ist allerdings in aktuellen Versionen behoben.
-
@meister-mopper gab es nicht auch mal ein Fehler, bei dem der Stick nicht mehr richtig erkannt wurde?
@phantomkommander sagte in Zigbee Stick spinnt:
gab es nicht auch mal ein Fehler, bei dem der Stick nicht mehr richtig erkannt wurde?
KA, ich nutze das TI-Board.
-
Ja, das Problem mit udev ist allerdings in aktuellen Versionen behoben.
@thomas-braun ah ok, hatte ich nicht mitbekommen.
-
@thomas-braun ah ok, hatte ich nicht mitbekommen.
@phantomkommander sagte in Zigbee Stick spinnt:
ah ok, hatte ich nicht mitbekommen.
Das udev Problem hatte ich auch, allerdings auf einem bullseye 32-Bit System auf dem Raspberrypi.
Seit 64-Bit bookworm ist das Geschichte. :blush: -
@gluecksmann sagte in Zigbee Stick spinnt:
Ähm..und das mache ich wie??
Oder über die Konsole:
iobroker install zigbee@1.8.24Konsole will er scheinbar nicht... sagt das es schon installiert ist... Die Kachel habe ich merkwürdigerweise nicht...
-
Konsole will er scheinbar nicht... sagt das es schon installiert ist... Die Kachel habe ich merkwürdigerweise nicht...
@gluecksmann sagte in Zigbee Stick spinnt:
onsole will er scheinbar nicht...
Das scheint ein Verständnisproblem zu sein. Mit Konsole meine ich über ssh (Putty oder sonstwas) auf dem iob-Server einloggen und den Befehl eingeben.
-
@gluecksmann sagte in Zigbee Stick spinnt:
onsole will er scheinbar nicht...
Das scheint ein Verständnisproblem zu sein. Mit Konsole meine ich über ssh (Putty oder sonstwas) auf dem iob-Server einloggen und den Befehl eingeben.
adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version. -
adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version.Bitte immer komplette Ein- und Ausgaben der Konsole in
CodeTagssonst kann hier keiner sehen, was Du machst und was das Ergebnis ist! -
adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version.@gluecksmann sagte in Zigbee Stick spinnt:
Use "upgrade" to upgrade to a newer version.
Dann versuch mal
iobroker upgrade zigbee@1.8.24, steht ja da. -
Bitte immer komplette Ein- und Ausgaben der Konsole in
CodeTagssonst kann hier keiner sehen, was Du machst und was das Ergebnis ist!pi@raspberrypi:~ $ iobroker install zigbee@1.8.24 adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version.
Support us
873
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge