UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Willi-Wunder]

@simatec

pi@iobroker:~ $ sudo influx auth list -t 74VTRbf_Qc6sAG_xxxxxxxxxxxxxxxxxxxxxxxxxxxxdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --json
/usr/local/bin/influx: 1: Syntax error: ")" unexpected

[simatec]

@willi-wunder poste den kompletten Befehl inkl. Token... Der ist bei dir lokal und es kann niemand etwas mit anfangen

[Willi-Wunder]

@simatec

sudo influx auth list -t 74VTRbf_Qc6sAG_goAo4AMkdEdPKkPdWFyxVzrPhY5hNuxX43QdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --json

[simatec]

@willi-wunder Läuft Influxdb auf dem gleichen System wie iobroker?

[Thomas Braun]

@willi-wunder

Software wird nicht so installiert, man verwendet einen Paketmanager.

sudo apt install PAKETNAME

Das entsprechende Repository muss zuvor ggfs . installiert werden.

[Willi-Wunder]

@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:

@willi-wunder Läuft Influxdb auf dem gleichen System wie iobroker?

Ja

[Thomas Braun]

@willi-wunder

cd
rm influx*
sudo apt update
apt policy influx*

[Willi-Wunder]

@thomas-braun

pi@iobroker:~ $ apt policy influx*
influxdb2-cli:
  Installed: 2.7.3-1
  Candidate: 2.7.3-1
  Version table:
 *** 2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
        100 /var/lib/dpkg/status
     2.7.1-2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb-client:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b13
  Version table:
     1.6.7~rc0-1+b13 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
influxdb-dev:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb2-client:
  Installed: (none)
  Candidate: 2.7.1-1
  Version table:
     2.7.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb:
  Installed: (none)
  Candidate: 1.8.10-1
  Version table:
     1.8.10-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     1.6.7~rc0-1+b13 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
influxctl:
  Installed: (none)
  Candidate: 2.4.2
  Version table:
     2.4.2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.2.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.1.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.4 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.3 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb2:
  Installed: 2.7.4-1
  Candidate: 2.7.4-1
  Version table:
 *** 2.7.4-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
        100 /var/lib/dpkg/status
     2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.2.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages

Danke, sieht jetzt schon besser aus :-)

[simatec]

@willi-wunder

sudo apt install influxdb2-client

[Willi-Wunder]

@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:

sudo apt install influxdb2-client

pi@iobroker:~ $ sudo apt install influxdb2-client
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following NEW packages will be installed:
  influxdb2-client
0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
Need to get 10.5 MB of archives.
After this operation, 24.0 MB of additional disk space will be used.
Get:1 https://repos.influxdata.com/debian stable/main arm64 influxdb2-client arm64 2.7.1-1 [10.5 MB]
Fetched 10.5 MB in 2s (4392 kB/s)
apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct!
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "de_DE",
        LC_ALL = "de_DE",
        LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously unselected package influxdb2-client.
(Reading database ... 146179 files and directories currently installed.)
Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ...
Unpacking influxdb2-client (2.7.1-1) ...
dpkg: error processing archive /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb (--unpack):
 trying to overwrite '/usr/bin/influx', which is also in package influxdb2-cli 2.7.3-1
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
 /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

Hätte ich vorher InfluxDB stoppen müssen?

[simatec]

@willi-wunder sagte in mit backitup kein Influxdb und Grafana backup möglich:

/usr/bin/influx

ohhh man da ist einiges vermurkst ...

sudo rm /usr/bin/influx
sudo apt install influxdb2-client

[Willi-Wunder]

@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:

sudo apt install influxdb2-client

pi@iobroker:~ $ sudo rm /usr/bin/influx
pi@iobroker:~ $ sudo apt install influxdb2-client
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following NEW packages will be installed:
  influxdb2-client
0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
Need to get 0 B/10.5 MB of archives.
After this operation, 24.0 MB of additional disk space will be used.
apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct!
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "de_DE",
        LC_ALL = "de_DE",
        LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 146179 files and directories currently installed.)
Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ...
Unpacking influxdb2-client (2.7.1-1) ...
dpkg: error processing archive /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb (--unpack):
 trying to overwrite '/usr/bin/influx', which is also in package influxdb2-cli 2.7.3-1
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
 /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

Hab den Rasp von Buster auf Bookworm neu eingerichtet, allerdings ein Backup vom Iobroker eingespielt. Hatte unter Buster influxDB 1.x gehabt. Mist...... Vielen Dank für eure Hilfe.

[simatec]

@willi-wunder Hast du vorher nicht den Befehl zum löschen ausgeführt?

[Willi-Wunder]

@simatec
Doch, gerade oben mit ergänzt, hatte ich zuvor mit ausgeführt......

[simatec]

@willi-wunder

apt policy influxdb2-cli

[Willi-Wunder]

pi@iobroker:~ $ apt policy influxdb2-cli
influxdb2-cli:
  Installed: 2.7.3-1
  Candidate: 2.7.3-1
  Version table:
 *** 2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
        100 /var/lib/dpkg/status
     2.7.1-2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages

[simatec]

@willi-wunder Dann war aber die Ausgabe vorher nicht vollständig...

[simatec]

@willi-wunder

sudo apt remove influxdb2-cli
sudo apt install influxdb2-client

[Willi-Wunder]

@simatec
Du meinst wegen sudo rm /usr/bin/influx ? Das hatte ich beim Code kopieren übersehen und dann nachgetragen.

[Willi-Wunder]

pi@iobroker:~ $ sudo apt remove influxdb2-cli
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages will be REMOVED:
  influxdb2-cli
0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded.
After this operation, 24.1 MB disk space will be freed.
Do you want to continue? [Y/n] y
apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct!
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "de_DE",
        LC_ALL = "de_DE",
        LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 146179 files and directories currently installed.)
Removing influxdb2-cli (2.7.3-1) ...
pi@iobroker:~ $ sudo apt install influxdb2-client
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following NEW packages will be installed:
  influxdb2-client
0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
Need to get 0 B/10.5 MB of archives.
After this operation, 24.0 MB of additional disk space will be used.
apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct!
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "de_DE",
        LC_ALL = "de_DE",
        LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 146176 files and directories currently installed.)
Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ...
Unpacking influxdb2-client (2.7.1-1) ...
Setting up influxdb2-client (2.7.1-1) ...