Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. ioBroker startet nicht nach Neuinstallation

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.5k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.1k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    2.7k

ioBroker startet nicht nach Neuinstallation

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
67 Beiträge 7 Kommentatoren 6.0k Aufrufe 5 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • W Willi-Wunder

    Okay, gerade nochmal alles neu gemacht, Image Lite ohne Desktop ausgewählt, nach Anleitung @Thomas-Braun
    ausgeführt, gleicher Fehler, siehe Log. Ab dem Punkt Installation 3/4 Iobroker hat es ca. 25 min. gedauert, dann kommt zwar ioBroker was installed successfully, kann diesen aber nicht über die Adresse aufrufen.

    pi@iobroker:~ $ curl -sLf https://iobroker.net/install.sh | bash -
    library: loaded
    Library version=2023-10-13
    
    ==========================================================================
    
        Welcome to the ioBroker installer!
        Installer version: 2023-10-13
    
        You might need to enter your password a couple of times.
    
    ==========================================================================
    
    
    ==========================================================================
        Installing prerequisites (1/4)
    ==========================================================================
    
    Hit:1 http://deb.debian.org/debian bookworm InRelease
    Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
    Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
    Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
    Reading package lists... Done
    
    ==========================================================================
    
        Node.js not found. Installing...
    
    ==========================================================================
    
    Hit:1 http://deb.debian.org/debian bookworm InRelease
    Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
    Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
    Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
    Reading package lists... Done
    Reading package lists... Done
    Building dependency tree... Done
    Reading state information... Done
    ca-certificates is already the newest version (20230311).
    curl is already the newest version (7.88.1-10+deb12u4).
    gnupg is already the newest version (2.2.40-1.1).
    gnupg set to manually installed.
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node                                                                                                                                                             _18.x nodistro main
     Processing triggers for man-db (2.11.2-2) ...ource1_arm64.deb ...led.)
    Installed nodejs
    Node.js Installed successfully!
    Changing npm registry to https://registry.npmjs.org
     Processing triggers for man-db (2.11.2-2) ...arm64.deb ... installed.)
    Installed acl
     Setting up libavahi-compat-libdnssd-dev:arm64 (0.8-10) ...-10_arm64.deb ...
    Installed libavahi-compat-libdnssd-dev
     Processing triggers for man-db (2.11.2-2) ...1) ...1_arm64.deb ...ed.)
    Installed libudev-dev
     Processing triggers for man-db (2.11.2-2) ...eb12u1) ...1_arm64.deb ...
    Installed libpam0g-dev
     Processing triggers for man-db (2.11.2-2) ...m64.deb ......installed.)
    Installed git
    Extracting templates from packages: 100%
     Preparing to unpack .../10-libcairo-script-interpreter2_1.16.0-7+rpt1_arm64.deb                                                                                                                                                              Setting up libcairo2-dev:arm64 (1.16.0-7+rpt1) ....u3) ...t1) .........
    Installed libcairo2-dev
     Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ...m64.deb ... ....
    Installed libpango1.0-dev
     Setting up libjpeg-dev:arm64 (1:2.1.5-2) ...5-2) ...4.deb ....deb ...)
    Installed libjpeg-dev
     Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... installed.)
    Installed libgif-dev
     Preparing to unpack .../16-libgdk-pixbuf-2.0-dev_2.42.10+dfsg-1+b1_arm64.deb ..                                                                                                                                                              Processing triggers for libgdk-pixbuf-2.0-0:arm64 (2.42.10+dfsg-1+b1) ........
    Installed librsvg2-dev
     Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....nstalled.)
    Installed cmake
    
    ==========================================================================
        Creating ioBroker user and directory (2/4)
    ==========================================================================
    
    User iobroker created
    Created /etc/sudoers.d/iobroker
    Directory /opt/iobroker created
    
    ==========================================================================
        Installing ioBroker (3/4)
    ==========================================================================
    
    npm ERR! code ECONNRESET
    npm ERR! network aborted
    npm ERR! network This is a problem related to network connectivity.
    npm ERR! network In most cases you are behind a proxy or have bad network settin                                                                                                                                                             gs.
    npm ERR! network
    npm ERR! network If you are behind a proxy, please make sure that the
    npm ERR! network 'proxy' config is set properly.  See: 'npm help config'
    
    npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12                                                                                                                                                             -22T16_47_20_580Z-debug-0.log
    
    ==========================================================================
        Finalizing installation (4/4)
    ==========================================================================
    
    Enabling autostart...
    Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /                                                                                                                                                             lib/systemd/system/iobroker.service.
    Autostart enabled!
    Fixing directory permissions...
    
    ==========================================================================
    
        ioBroker was installed successfully
        Open http://192.168.2.230:8081 in a browser and start configuring!
    
    ==========================================================================
    
    
    You need to re-login before doing anything else on the console!
    

    Und jetzt? :confused:

    Iobroker Status

     pi@iobroker:~ $ iobroker status
    Uncaught Rejection: Error: /opt/iobroker/iobroker-data/iobroker.json: ENOENT: no such file or directory, open '/opt/iobroker/iobroker-data/iobroker.json'
        at Object.openSync (node:fs:596:3)
        at Object.readFileSync (node:fs:464:35)
        at Object.readFileSync (/opt/iobroker/node_modules/jsonfile/index.js:50:22)
        at dbConnect (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/dbConnection.js:63:39)
        at CLIProcess.status (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/cli/cliProcess.js:194:9)
        at processCommand (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup.js:483:25)
        at Object.execute (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup.js:2705:5)
        at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js:1:40)
        at Module._compile (node:internal/modules/cjs/loader:1356:14)
        at Module._extensions..js (node:internal/modules/cjs/loader:1414:10)
    

    HomoranH Offline
    HomoranH Offline
    Homoran
    Global Moderator Administrators
    schrieb am zuletzt editiert von
    #21

    @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

    npm ERR! network This is a problem related to network connectivity.

    der mag nicht ins Internet

    kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

    der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

    ? 1 Antwort Letzte Antwort
    0
    • HomoranH Homoran

      @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

      npm ERR! network This is a problem related to network connectivity.

      der mag nicht ins Internet

      ? Offline
      ? Offline
      Ein ehemaliger Benutzer
      schrieb am zuletzt editiert von Ein ehemaliger Benutzer
      #22

      @homoran sagte in ioBroker startet nicht nach Neuinstallation:

      der mag nicht ins Internet

      Moin,

      doch, denn Punkt 1, die prerequisites kann er ja holen!

          Installing prerequisites (1/4)
      ==========================================================================
      Hit:1 http://deb.debian.org/debian bookworm InRelease
      Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
      Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
      Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
      Reading package lists... Done
      ...
      

      VG
      Bernd

      P.S.: aktuell ist die Verbindung von hier zum iobroker.net ok, wie es vom TE aus sieht

      ❯ ping iobroker.net
      PING iobroker.net (82.165.135.239) 56(84) Bytes an Daten.
      64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=1 ttl=56 Zeit=13.5 ms
      64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=2 ttl=56 Zeit=13.0 ms
      64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=3 ttl=56 Zeit=12.9 ms
      64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=4 ttl=56 Zeit=12.9 ms
      64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=5 ttl=56 Zeit=12.6 ms
      ^C
      --- iobroker.net ping-Statistik ---
      5 Pakete übertragen, 5 empfangen, 0% packet loss, time 4006ms
      rtt min/avg/max/mdev = 12.584/12.970/13.529/0.307 ms
      ❯ traceroute iobroker.net
      traceroute to iobroker.net (82.165.135.239), 30 hops max, 60 byte packets
       1  _gateway (192.168.178.1)  0.317 ms  0.501 ms  0.582 ms
       2  lo0.irai0010.as9136.net (62.176.224.222)  4.709 ms  4.797 ms  4.769 ms
       3  ae0-181.irci0006.as9136.net (62.176.238.143)  4.794 ms  4.767 ms  4.733 ms
       4  et-0-0-0-0.cfrc2101.as9136.net (62.176.251.11)  11.192 ms  11.251 ms  11.224 ms
       5  decix.bb-a.fra3.fra.de.net.ionos.com (80.81.192.123)  11.437 ms  11.444 ms  11.670 ms
       6  lo-0-0.rc-a.bap.rhr.de.net.ionos.com (212.227.117.208)  17.202 ms  18.543 ms  18.463 ms
       7  port-channel-2.gw-distdh-a.kw.nbz.fr.net.ionos.com (195.20.243.9)  16.602 ms  13.515 ms  14.033 ms
       8  ae-1.gw-prtr-a0110-a.kw.nbz.fr.net.ionos.com (195.20.243.81)  19.131 ms * *
       9  s21181212.onlinehome-server.info (82.165.135.239)  19.532 ms  15.488 ms  14.474 ms
      
      W 1 Antwort Letzte Antwort
      0
      • ? Ein ehemaliger Benutzer

        @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

        Und jetzt?

        Moin,

        kann es sein, dass Deine Netzwerkanbindung nicht gut ist?
        Denn da steht ja,

        npm ERR! code ECONNRESET
        npm ERR! network aborted
        npm ERR! network This is a problem related to network connectivity.
        npm ERR! network In most cases you are behind a proxy or have bad network settin gs.
        npm ERR! network
        npm ERR! network If you are behind a proxy, please make sure that the
        npm ERR! network 'proxy' config is set properly. See: 'npm help config'
        

        Es kann auch mal wieder sein, dass der Server ausgelastet ist, vielleicht später noch einmal mit dem Befehl versuchen,, das Skript sollte dann ja 1 und 2 überspringen.

        VG
        Bernd

        W Offline
        W Offline
        Willi-Wunder
        schrieb am zuletzt editiert von
        #23

        @dp20eic sagte in ioBroker startet nicht nach Neuinstallation:

        Moin,

        kann es sein, dass Deine Netzwerkanbindung nicht gut ist?

        Wäre mir nicht bekannt, läuft hier alles. Mein System Rasp scheint ja auch keine Probleme zu haben, der hat aber eine Fest IP. Mal die Netzwerk Einstellung in den anderen kopieren? Wo steht das genau drin? Hab mittlerweile einen zweiten Rasp bekommen, somit kann ich auf beide zugreifen.......

        Thomas BraunT ? 2 Antworten Letzte Antwort
        0
        • W Willi-Wunder

          @dp20eic sagte in ioBroker startet nicht nach Neuinstallation:

          Moin,

          kann es sein, dass Deine Netzwerkanbindung nicht gut ist?

          Wäre mir nicht bekannt, läuft hier alles. Mein System Rasp scheint ja auch keine Probleme zu haben, der hat aber eine Fest IP. Mal die Netzwerk Einstellung in den anderen kopieren? Wo steht das genau drin? Hab mittlerweile einen zweiten Rasp bekommen, somit kann ich auf beide zugreifen.......

          Thomas BraunT Online
          Thomas BraunT Online
          Thomas Braun
          Most Active
          schrieb am zuletzt editiert von
          #24

          @willi-wunder

          IPv6 aktiv?

          Linux-Werkzeugkasten:
          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
          NodeJS Fixer Skript:
          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

          W 1 Antwort Letzte Antwort
          0
          • W Willi-Wunder

            @dp20eic sagte in ioBroker startet nicht nach Neuinstallation:

            Moin,

            kann es sein, dass Deine Netzwerkanbindung nicht gut ist?

            Wäre mir nicht bekannt, läuft hier alles. Mein System Rasp scheint ja auch keine Probleme zu haben, der hat aber eine Fest IP. Mal die Netzwerk Einstellung in den anderen kopieren? Wo steht das genau drin? Hab mittlerweile einen zweiten Rasp bekommen, somit kann ich auf beide zugreifen.......

            ? Offline
            ? Offline
            Ein ehemaliger Benutzer
            schrieb am zuletzt editiert von
            #25

            @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

            Wäre mir nicht bekannt, läuft hier alles.

            Moin,

            damit ist ja auch nicht nur Dein Netzwerk gemeint, es kann ja sein, dass jemand zum iobroker.net auf der Leitung steht, dass Du vielleicht bis zu Deinem Provider eine stabile Leitung hast ist ja nur die halbe Miete.

            VG
            Bernd

            1 Antwort Letzte Antwort
            0
            • Thomas BraunT Thomas Braun

              @willi-wunder

              IPv6 aktiv?

              W Offline
              W Offline
              Willi-Wunder
              schrieb am zuletzt editiert von
              #26

              @thomas-braun
              Nein, bin mir aber nicht sicher. Wie kann ich das prüfen? Der andere Rasp läuft ja auch.......

              Marc BergM 1 Antwort Letzte Antwort
              0
              • W Willi-Wunder

                @thomas-braun
                Nein, bin mir aber nicht sicher. Wie kann ich das prüfen? Der andere Rasp läuft ja auch.......

                Marc BergM Offline
                Marc BergM Offline
                Marc Berg
                Most Active
                schrieb am zuletzt editiert von
                #27

                @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                Wie kann ich das prüfen?

                ping registry.npmjs.org
                

                vom Raspi aus.

                NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+RabbitMQ+Grafana

                Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad

                Benutzt das Voting im Beitrag, wenn er euch geholfen hat.

                1 Antwort Letzte Antwort
                0
                • W Offline
                  W Offline
                  Willi-Wunder
                  schrieb am zuletzt editiert von
                  #28

                  @marc-berg sagte in ioBroker startet nicht nach Neuinstallation:

                  ping registry.npmjs.org


                  pi@iobroker:~ $ ping registry.npmjs.org
                  PING registry.npmjs.org(2606:4700::6810:23 (2606:4700::6810:23)) 56 data bytes
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=1 ttl=57 time=210 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=3 ttl=57 time=202 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=4 ttl=57 time=225 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=5 ttl=57 time=217 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=8 ttl=57 time=209 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=9 ttl=57 time=175 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=10 ttl=57 time=181 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=11 ttl=57 time=221 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=12 ttl=57 time=218 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=13 ttl=57 time=213 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=14 ttl=57 time=208 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=15 ttl=57 time=214 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=16 ttl=57 time=216 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=17 ttl=57 time=217 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=18 ttl=57 time=215 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=19 ttl=57 time=222 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=20 ttl=57 time=220 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=21 ttl=57 time=219 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=22 ttl=57 time=219 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=23 ttl=57 time=214 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=24 ttl=57 time=213 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=25 ttl=57 time=217 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=26 ttl=57 time=215 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=27 ttl=57 time=214 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=28 ttl=57 time=216 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=29 ttl=57 time=222 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=31 ttl=57 time=222 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=33 ttl=57 time=228 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=36 ttl=57 time=216 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=37 ttl=57 time=217 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=39 ttl=57 time=217 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=40 ttl=57 time=220 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=41 ttl=57 time=215 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=42 ttl=57 time=216 ms
                  64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=43 ttl=57 time=220 ms

                  Ist das jetzt gut oder schlecht?

                  Marc BergM 1 Antwort Letzte Antwort
                  0
                  • W Willi-Wunder

                    @marc-berg sagte in ioBroker startet nicht nach Neuinstallation:

                    ping registry.npmjs.org


                    pi@iobroker:~ $ ping registry.npmjs.org
                    PING registry.npmjs.org(2606:4700::6810:23 (2606:4700::6810:23)) 56 data bytes
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=1 ttl=57 time=210 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=3 ttl=57 time=202 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=4 ttl=57 time=225 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=5 ttl=57 time=217 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=8 ttl=57 time=209 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=9 ttl=57 time=175 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=10 ttl=57 time=181 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=11 ttl=57 time=221 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=12 ttl=57 time=218 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=13 ttl=57 time=213 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=14 ttl=57 time=208 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=15 ttl=57 time=214 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=16 ttl=57 time=216 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=17 ttl=57 time=217 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=18 ttl=57 time=215 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=19 ttl=57 time=222 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=20 ttl=57 time=220 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=21 ttl=57 time=219 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=22 ttl=57 time=219 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=23 ttl=57 time=214 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=24 ttl=57 time=213 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=25 ttl=57 time=217 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=26 ttl=57 time=215 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=27 ttl=57 time=214 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=28 ttl=57 time=216 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=29 ttl=57 time=222 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=31 ttl=57 time=222 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=33 ttl=57 time=228 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=36 ttl=57 time=216 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=37 ttl=57 time=217 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=39 ttl=57 time=217 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=40 ttl=57 time=220 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=41 ttl=57 time=215 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=42 ttl=57 time=216 ms
                    64 bytes from 2606:4700::6810:23 (2606:4700::6810:23): icmp_seq=43 ttl=57 time=220 ms

                    Ist das jetzt gut oder schlecht?

                    Marc BergM Offline
                    Marc BergM Offline
                    Marc Berg
                    Most Active
                    schrieb am zuletzt editiert von
                    #29

                    @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                    Ist das jetzt gut oder schlecht?

                    Das heißt zumindest, dass IPv6 eingerichtet ist und funktioniert. Gut, dass es funktioniert. Schlecht, dass die Ursache weiter unklar bleibt.

                    NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+RabbitMQ+Grafana

                    Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad

                    Benutzt das Voting im Beitrag, wenn er euch geholfen hat.

                    W 1 Antwort Letzte Antwort
                    0
                    • Marc BergM Marc Berg

                      @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                      Ist das jetzt gut oder schlecht?

                      Das heißt zumindest, dass IPv6 eingerichtet ist und funktioniert. Gut, dass es funktioniert. Schlecht, dass die Ursache weiter unklar bleibt.

                      W Offline
                      W Offline
                      Willi-Wunder
                      schrieb am zuletzt editiert von
                      #30

                      @marc-berg
                      Das sudo apt update && sudo apt full-upgrade hat er doch auch ausgeführt, daher gehe ich davon aus, dass die Internetverbindung eigentlich paßt.

                      W HomoranH 2 Antworten Letzte Antwort
                      0
                      • W Willi-Wunder

                        @marc-berg
                        Das sudo apt update && sudo apt full-upgrade hat er doch auch ausgeführt, daher gehe ich davon aus, dass die Internetverbindung eigentlich paßt.

                        W Offline
                        W Offline
                        Willi-Wunder
                        schrieb am zuletzt editiert von Homoran
                        #31

                        Hab jetzt nochmal curl -sLf https://iobroker.net/install.sh | bash - ausgeführt, log ist

                         ==========================================================================
                            Installing ioBroker (3/4)
                        ==========================================================================
                        
                        npm ERR! code ENOTEMPTY
                        npm ERR! syscall rename
                        npm ERR! path /opt/iobroker/node_modules/iobroker.admin
                        npm ERR! dest /opt/iobroker/node_modules/.iobroker.admin-TtUA2igk
                        npm ERR! errno -39
                        npm ERR! ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/iobroker.admin' -> '/opt/iobroker/node_modules/.iobroker.admin-TtUA2igk'
                        
                        npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-22T19_13_30_176Z-debug-0.log
                        
                        ==========================================================================
                            Finalizing installation (4/4)
                        ==========================================================================
                        
                        Enabling autostart...
                        Autostart enabled!
                        Fixing directory permissions...
                        
                        ==========================================================================
                        
                            ioBroker was installed successfully
                            Open http://192.168.2.230:8081 in a browser and start configuring!
                        
                        ==========================================================================
                        


                        MOD-EDIT: Code in code-tags gesetzt!

                        1 Antwort Letzte Antwort
                        0
                        • W Willi-Wunder

                          @marc-berg
                          Das sudo apt update && sudo apt full-upgrade hat er doch auch ausgeführt, daher gehe ich davon aus, dass die Internetverbindung eigentlich paßt.

                          HomoranH Offline
                          HomoranH Offline
                          Homoran
                          Global Moderator Administrators
                          schrieb am zuletzt editiert von
                          #32

                          @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                          @marc-berg
                          Das sudo apt update && sudo apt full-upgrade hat er doch auch ausgeführt, daher gehe ich davon aus, dass die Internetverbindung eigentlich paßt.

                          das geht zum linux Repo. das sind andere Server
                          Der Fehler bei dir trat auf, als das InstallTionsskript auf den npm-server zugreifen wollte

                          kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                          Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                          der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                          1 Antwort Letzte Antwort
                          0
                          • ? Ein ehemaliger Benutzer

                            @homoran sagte in ioBroker startet nicht nach Neuinstallation:

                            der mag nicht ins Internet

                            Moin,

                            doch, denn Punkt 1, die prerequisites kann er ja holen!

                                Installing prerequisites (1/4)
                            ==========================================================================
                            Hit:1 http://deb.debian.org/debian bookworm InRelease
                            Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
                            Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
                            Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
                            Reading package lists... Done
                            ...
                            

                            VG
                            Bernd

                            P.S.: aktuell ist die Verbindung von hier zum iobroker.net ok, wie es vom TE aus sieht

                            ❯ ping iobroker.net
                            PING iobroker.net (82.165.135.239) 56(84) Bytes an Daten.
                            64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=1 ttl=56 Zeit=13.5 ms
                            64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=2 ttl=56 Zeit=13.0 ms
                            64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=3 ttl=56 Zeit=12.9 ms
                            64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=4 ttl=56 Zeit=12.9 ms
                            64 Bytes von s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=5 ttl=56 Zeit=12.6 ms
                            ^C
                            --- iobroker.net ping-Statistik ---
                            5 Pakete übertragen, 5 empfangen, 0% packet loss, time 4006ms
                            rtt min/avg/max/mdev = 12.584/12.970/13.529/0.307 ms
                            ❯ traceroute iobroker.net
                            traceroute to iobroker.net (82.165.135.239), 30 hops max, 60 byte packets
                             1  _gateway (192.168.178.1)  0.317 ms  0.501 ms  0.582 ms
                             2  lo0.irai0010.as9136.net (62.176.224.222)  4.709 ms  4.797 ms  4.769 ms
                             3  ae0-181.irci0006.as9136.net (62.176.238.143)  4.794 ms  4.767 ms  4.733 ms
                             4  et-0-0-0-0.cfrc2101.as9136.net (62.176.251.11)  11.192 ms  11.251 ms  11.224 ms
                             5  decix.bb-a.fra3.fra.de.net.ionos.com (80.81.192.123)  11.437 ms  11.444 ms  11.670 ms
                             6  lo-0-0.rc-a.bap.rhr.de.net.ionos.com (212.227.117.208)  17.202 ms  18.543 ms  18.463 ms
                             7  port-channel-2.gw-distdh-a.kw.nbz.fr.net.ionos.com (195.20.243.9)  16.602 ms  13.515 ms  14.033 ms
                             8  ae-1.gw-prtr-a0110-a.kw.nbz.fr.net.ionos.com (195.20.243.81)  19.131 ms * *
                             9  s21181212.onlinehome-server.info (82.165.135.239)  19.532 ms  15.488 ms  14.474 ms
                            
                            W Offline
                            W Offline
                            Willi-Wunder
                            schrieb am zuletzt editiert von
                            #33

                            @dp20eic sagte in ioBroker startet nicht nach Neuinstallation:

                            ping iobroker.net

                            Sieht bei mir auch gut aus, hmm

                            pi@iobroker:~ $ ping iobroker.net
                            PING iobroker.net (82.165.135.239) 56(84) bytes of data.
                            64 bytes from s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=1 ttl=56 time=16.8 ms
                            64 bytes from s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=2 ttl=56 time=14.8 ms
                            
                            ^C
                            --- iobroker.net ping statistics ---
                            60 packets transmitted, 60 received, 0% packet loss, time 59091ms
                            rtt min/avg/max/mdev = 14.449/15.131/17.219/0.487 ms
                            
                            
                            Marc BergM 1 Antwort Letzte Antwort
                            0
                            • W Willi-Wunder

                              @dp20eic sagte in ioBroker startet nicht nach Neuinstallation:

                              ping iobroker.net

                              Sieht bei mir auch gut aus, hmm

                              pi@iobroker:~ $ ping iobroker.net
                              PING iobroker.net (82.165.135.239) 56(84) bytes of data.
                              64 bytes from s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=1 ttl=56 time=16.8 ms
                              64 bytes from s21181212.onlinehome-server.info (82.165.135.239): icmp_seq=2 ttl=56 time=14.8 ms
                              
                              ^C
                              --- iobroker.net ping statistics ---
                              60 packets transmitted, 60 received, 0% packet loss, time 59091ms
                              rtt min/avg/max/mdev = 14.449/15.131/17.219/0.487 ms
                              
                              
                              Marc BergM Offline
                              Marc BergM Offline
                              Marc Berg
                              Most Active
                              schrieb am zuletzt editiert von
                              #34

                              @willi-wunder

                              was sagt eigentlich das besagte Log:

                              A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12
                              

                              ?

                              NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+RabbitMQ+Grafana

                              Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad

                              Benutzt das Voting im Beitrag, wenn er euch geholfen hat.

                              W 1 Antwort Letzte Antwort
                              0
                              • Marc BergM Marc Berg

                                @willi-wunder

                                was sagt eigentlich das besagte Log:

                                A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12
                                

                                ?

                                W Offline
                                W Offline
                                Willi-Wunder
                                schrieb am zuletzt editiert von
                                #35

                                @marc-berg

                                Das Verzeichnis scheint es nicht zu geben......
                                Home-pi.jpg

                                Marc BergM 1 Antwort Letzte Antwort
                                0
                                • W Willi-Wunder

                                  @marc-berg

                                  Das Verzeichnis scheint es nicht zu geben......
                                  Home-pi.jpg

                                  Marc BergM Offline
                                  Marc BergM Offline
                                  Marc Berg
                                  Most Active
                                  schrieb am zuletzt editiert von Marc Berg
                                  #36

                                  @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                                  @marc-berg

                                  Das Verzeichnis scheint es nicht zu geben......
                                  Home-pi.jpg

                                  Das ist ein verstecktes. Du musst das Anzeigen aktivieren. Womit guckst du da?

                                  NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+RabbitMQ+Grafana

                                  Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad

                                  Benutzt das Voting im Beitrag, wenn er euch geholfen hat.

                                  W 1 Antwort Letzte Antwort
                                  0
                                  • Marc BergM Marc Berg

                                    @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                                    @marc-berg

                                    Das Verzeichnis scheint es nicht zu geben......
                                    Home-pi.jpg

                                    Das ist ein verstecktes. Du musst das Anzeigen aktivieren. Womit guckst du da?

                                    W Offline
                                    W Offline
                                    Willi-Wunder
                                    schrieb am zuletzt editiert von
                                    #37

                                    @marc-berg
                                    Mit WinSCP .......war aber gerade auf dem aktiven System, sorry. Auf den neuen kann ich mich gerade nicht einloggen mit root......

                                    Marc BergM Thomas BraunT 3 Antworten Letzte Antwort
                                    0
                                    • W Willi-Wunder

                                      @marc-berg
                                      Mit WinSCP .......war aber gerade auf dem aktiven System, sorry. Auf den neuen kann ich mich gerade nicht einloggen mit root......

                                      Marc BergM Offline
                                      Marc BergM Offline
                                      Marc Berg
                                      Most Active
                                      schrieb am zuletzt editiert von
                                      #38

                                      @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                                      Auf den neuen kann ich mich gerade nicht einloggen mit root......

                                      Aber doch mit "pi"?

                                      Und dann Strg+Alt+H, um versteckte Dateien anzuzeigen.

                                      NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+RabbitMQ+Grafana

                                      Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad

                                      Benutzt das Voting im Beitrag, wenn er euch geholfen hat.

                                      W 1 Antwort Letzte Antwort
                                      0
                                      • Marc BergM Marc Berg

                                        @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                                        Auf den neuen kann ich mich gerade nicht einloggen mit root......

                                        Aber doch mit "pi"?

                                        Und dann Strg+Alt+H, um versteckte Dateien anzuzeigen.

                                        W Offline
                                        W Offline
                                        Willi-Wunder
                                        schrieb am zuletzt editiert von
                                        #39

                                        @marc-berg
                                        Super, danke, jetzt aber......
                                        2023-12-22T19_13_30_176Z-debug-0.log

                                        Marc BergM 1 Antwort Letzte Antwort
                                        0
                                        • W Willi-Wunder

                                          @marc-berg
                                          Mit WinSCP .......war aber gerade auf dem aktiven System, sorry. Auf den neuen kann ich mich gerade nicht einloggen mit root......

                                          Marc BergM Offline
                                          Marc BergM Offline
                                          Marc Berg
                                          Most Active
                                          schrieb am zuletzt editiert von
                                          #40

                                          @willi-wunder sagte in ioBroker startet nicht nach Neuinstallation:

                                          Mit WinSCP .......war aber gerade auf dem aktiven System, sorry.

                                          Aber den Ping vorhin hast du auf dem richtigen gemacht!?

                                          NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+RabbitMQ+Grafana

                                          Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad

                                          Benutzt das Voting im Beitrag, wenn er euch geholfen hat.

                                          W 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate
                                          FAQ Cloud / IOT
                                          HowTo: Node.js-Update
                                          HowTo: Backup/Restore
                                          Downloads
                                          BLOG

                                          353

                                          Online

                                          32.4k

                                          Benutzer

                                          81.5k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe