Alle Instanzen rot,
-
Hallo zusammen
ich hatte jetzt schon öfters das Problem, dass ich etwas in einem Blocklyscript ändere und oben im Scriptfenster "Instanz gestoppt" angezeigt wird. Wenn ich bei Instanzen nachschaue sieht es so aus:
Leider werden die Änderungen die ich im Blocklyscript mache, nicht übernommen wenn ich auf speichern klicke.
Im Log von meinem Docker Container läuft auch einiges auf aber ich kann das nicht wirklich deuten:
Ich glaube irgendwas stimmt da nicht
-------------------------------------------------------------------------------- ------------------------- 2023-11-01 16:48:16 ------------------------- -------------------------------------------------------------------------------- ----- ----- ----- ██╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗ ███████╗ ██████╗ ----- ----- ██║ ██╔═══██╗ ██╔══██╗ ██╔══██╗ ██╔═══██╗ ██║ ██╔╝ ██╔════╝ ██╔══██╗ ----- ----- ██║ ██║ ██║ ██████╔╝ ██████╔╝ ██║ ██║ █████╔╝ █████╗ ██████╔╝ ----- ----- ██║ ██║ ██║ ██╔══██╗ ██╔══██╗ ██║ ██║ ██╔═██╗ ██╔══╝ ██╔══██╗ ----- ----- ██║ ╚██████╔╝ ██████╔╝ ██║ ██║ ╚██████╔╝ ██║ ██╗ ███████╗ ██║ ██║ ----- ----- ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═╝ ╚═╝ ╚══════╝ ╚═╝ ╚═╝ ----- ----- ----- ----- Welcome to your ioBroker Docker container! ----- ----- Startupscript is now running! ----- ----- Please be patient! ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- System Information ----- ----- arch: x86_64 ----- ----- hostname: ioBrokerTWS ----- ----- ----- ----- Version Information ----- ----- image: v8.1.0 ----- ----- build: 2023-09-21T23:45:32+00:00 ----- ----- node: v18.17.1 ----- ----- npm: 9.6.7 ----- ----- ----- ----- Environment Variables ----- ----- SETGID: 1000 ----- ----- SETUID: 1000 ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- Step 1 of 5: Preparing container ----- -------------------------------------------------------------------------------- This is not the first run of this container. Skipping first run preparation. -------------------------------------------------------------------------------- ----- Step 2 of 5: Detecting ioBroker installation ----- -------------------------------------------------------------------------------- Existing installation of ioBroker detected in "/opt/iobroker". -------------------------------------------------------------------------------- ----- Step 3 of 5: Checking ioBroker installation ----- -------------------------------------------------------------------------------- (Re)setting permissions (This might take a while! Please be patient!)... Done. Fixing "sudo-bug" by replacing sudo with gosu... Done. Checking Database connection... Done. Hostname in ioBroker matches the hostname of this container. No action required. -------------------------------------------------------------------------------- ----- Step 4 of 5: Applying special settings ----- -------------------------------------------------------------------------------- Some adapters have special requirements/ settings which can be activated by the use of environment variables. For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs/). -------------------------------------------------------------------------------- ----- Step 5 of 5: ioBroker startup ----- -------------------------------------------------------------------------------- Starting ioBroker... ##### #### ### ## # iobroker.js-controller log output # ## ### #### ##### ================================== > LOG REDIRECT system.adapter.admin.0 => true [starting] host.ioBrokerTWS check instance "system.adapter.admin.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.javascript.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.node-red.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.scenes.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.telegram.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.telegram.1" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.hue.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.hue.1" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.ical.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.mihome-vacuum.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.mqtt-client.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.shelly.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.synology.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.unifi.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.discovery.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.backitup.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.doorbird.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.gruenbeck.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.info.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.iot.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.klf200.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.knx.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.lg-thinq.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.procon-ip.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.pvforecast.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.statistics.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.text2command.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.viessmannapi.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.web.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.yahka.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.mobile-alerts.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.e3dc-rscp.0" for host "ioBrokerTWS" Send diag info: {"uuid":"14bb1351-b2cb-4fb0-987e-3d35fb525e32","language":"de","country":"Germany","hosts":[{"version":"5.0.12","platform":"Javascript/Node.js","type":"linux"}],"node":"v18.17.1","arch":"x64","docker":true,"adapters":{"admin":{"version":"6.12.0","platform":"Javascript/Node.js"},"discovery":{"version":"3.1.0","platform":"Javascript/Node.js"},"backitup":{"version":"2.8.1","platform":"Javascript/Node.js"},"javascript":{"version":"7.1.4","platform":"Javascript/Node.js"},"alpha-ess":{"version":"1.0.2","platform":"Javascript/Node.js"},"device-reminder":{"version":"1.2.9","platform":"Javascript/Node.js"},"doorbird":{"version":"1.2.4","platform":"Javascript/Node.js"},"gruenbeck":{"version":"0.0.42","platform":"Javascript/Node.js"},"habpanel":{"version":"0.5.0","platform":"Javascript/Node.js"},"hue":{"version":"3.10.1","platform":"Javascript/Node.js"},"ical":{"version":"1.13.3","platform":"Javascript/Node.js"},"info":{"version":"2.0.0","platform":"Javascript/Node.js"},"iot":{"version":"1.14.5","platform":"Javascript/Node.js"},"klf200":{"version":"1.1.2","platform":"Javascript/Node.js"},"knx":{"version":"2.0.22","platform":"Javascript/Node.js"},"lg-thinq":{"version":"0.1.4","platform":"Javascript/Node.js"},"lgtv":{"version":"1.1.12","platform":"Javascript/Node.js"},"mihome":{"version":"1.4.0","platform":"Javascript/Node.js"},"mihome-vacuum":{"version":"4.0.0","platform":"Javascript/Node.js"},"mobile-alerts":{"version":"0.5.1","platform":"Javascript/Node.js"},"mqtt":{"version":"4.1.1","platform":"Javascript/Node.js"},"mqtt-client":{"version":"1.6.5","platform":"Javascript/Node.js"},"node-red":{"version":"4.0.3","platform":"Javascript/Node.js"},"procon-ip":{"version":"1.4.0","platform":"Javascript/Node.js"},"pvforecast":{"version":"2.8.1","platform":"Javascript/Node.js"},"scenes":{"version":"2.3.9","platform":"Javascript/Node.js"},"shelly":{"version":"6.4.5","platform":"Javascript/Node.js"},"simple-api":{"version":"2.7.2","platform":"Javascript/Node.js"},"socketio":{"version":"6.5.2","platform":"Javascript/Node.js"},"sprinklecontrol":{"version":"0.2.13","platform":"Javascript/Node.js"},"statistics":{"version":"2.3.0","platform":"Javascript/Node.js"},"synology":{"version":"3.0.0","platform":"Javascript/Node.js"},"telegram":{"version":"1.16.0","platform":"Javascript/Node.js"},"text2command":{"version":"3.0.2","platform":"Javascript/Node.js"},"unifi":{"version":"0.6.6","platform":"Javascript/Node.js"},"viessmannapi":{"version":"2.3.0","platform":"Javascript/Node.js"},"web":{"version":"6.1.0","platform":"Javascript/Node.js"},"ws":{"version":"2.5.3","platform":"Javascript/Node.js"},"yahka":{"version":"1.0.3","platform":"Javascript/Node.js"},"e3dc-rscp":{"version":"1.2.3","platform":"Javascript/Node.js"}},"statesType":"jsonl","objectsType":"jsonl","noInstances":32,"compactMode":false,"noCompactInstances":0,"model":"AMD GX-412TC SOC","cpus":4,"mem":4130750464,"ostype":"Linux","city":"Freital"} /bin/sh: 1: hcitool: not found ================================== > LOG REDIRECT system.adapter.admin.0 => true [system.adapter.admin.0.logging] Send diag info: {"uuid":"14bb1351-b2cb-4fb0-987e-3d35fb525e32","language":"de","country":"Germany","hosts":[{"version":"5.0.12","platform":"Javascript/Node.js","type":"linux"}],"node":"v18.17.1","arch":"x64","docker":true,"adapters":{"admin":{"version":"6.12.0","platform":"Javascript/Node.js"},"discovery":{"version":"3.1.0","platform":"Javascript/Node.js"},"backitup":{"version":"2.8.1","platform":"Javascript/Node.js"},"javascript":{"version":"7.1.4","platform":"Javascript/Node.js"},"alpha-ess":{"version":"1.0.2","platform":"Javascript/Node.js"},"device-reminder":{"version":"1.2.9","platform":"Javascript/Node.js"},"doorbird":{"version":"1.2.4","platform":"Javascript/Node.js"},"gruenbeck":{"version":"0.0.42","platform":"Javascript/Node.js"},"habpanel":{"version":"0.5.0","platform":"Javascript/Node.js"},"hue":{"version":"3.10.1","platform":"Javascript/Node.js"},"ical":{"version":"1.13.3","platform":"Javascript/Node.js"},"info":{"version":"2.0.0","platform":"Javascript/Node.js"},"iot":{"version":"1.14.5","platform":"Javascript/Node.js"},"klf200":{"version":"1.1.2","platform":"Javascript/Node.js"},"knx":{"version":"2.0.22","platform":"Javascript/Node.js"},"lg-thinq":{"version":"0.1.4","platform":"Javascript/Node.js"},"lgtv":{"version":"1.1.12","platform":"Javascript/Node.js"},"mihome":{"version":"1.4.0","platform":"Javascript/Node.js"},"mihome-vacuum":{"version":"4.0.0","platform":"Javascript/Node.js"},"mobile-alerts":{"version":"0.5.1","platform":"Javascript/Node.js"},"mqtt":{"version":"4.1.1","platform":"Javascript/Node.js"},"mqtt-client":{"version":"1.6.5","platform":"Javascript/Node.js"},"node-red":{"version":"4.0.3","platform":"Javascript/Node.js"},"procon-ip":{"version":"1.4.0","platform":"Javascript/Node.js"},"pvforecast":{"version":"2.8.1","platform":"Javascript/Node.js"},"scenes":{"version":"2.3.9","platform":"Javascript/Node.js"},"shelly":{"version":"6.4.5","platform":"Javascript/Node.js"},"simple-api":{"version":"2.7.2","platform":"Javascript/Node.js"},"socketio":{"version":"6.5.2","platform":"Javascript/Node.js"},"sprinklecontrol":{"version":"0.2.13","platform":"Javascript/Node.js"},"statistics":{"version":"2.3.0","platform":"Javascript/Node.js"},"synology":{"version":"3.0.0","platform":"Javascript/Node.js"},"telegram":{"version":"1.16.0","platform":"Javascript/Node.js"},"text2command":{"version":"3.0.2","platform":"Javascript/Node.js"},"unifi":{"version":"0.6.6","platform":"Javascript/Node.js"},"viessmannapi":{"version":"2.3.0","platform":"Javascript/Node.js"},"web":{"version":"6.1.0","platform":"Javascript/Node.js"},"ws":{"version":"2.5.3","platform":"Javascript/Node.js"},"yahka":{"version":"1.0.3","platform":"Javascript/Node.js"},"e3dc-rscp":{"version":"1.2.3","platform":"Javascript/Node.js"}},"statesType":"jsonl","objectsType":"jsonl","noInstances":32,"compactMode":false,"noCompactInstances":0,"model":"AMD GX-412TC SOC","cpus":4,"mem":4130750464,"ostype":"Linux","city":"Freital"} -
Hallo zusammen
ich hatte jetzt schon öfters das Problem, dass ich etwas in einem Blocklyscript ändere und oben im Scriptfenster "Instanz gestoppt" angezeigt wird. Wenn ich bei Instanzen nachschaue sieht es so aus:Leider werden die Änderungen die ich im Blocklyscript mache, nicht übernommen wenn ich auf speichern klicke.
Im Log von meinem Docker Container läuft auch einiges auf aber ich kann das nicht wirklich deuten:
Ich glaube irgendwas stimmt da nicht
-------------------------------------------------------------------------------- ------------------------- 2023-11-01 16:48:16 ------------------------- -------------------------------------------------------------------------------- ----- ----- ----- ██╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗ ███████╗ ██████╗ ----- ----- ██║ ██╔═══██╗ ██╔══██╗ ██╔══██╗ ██╔═══██╗ ██║ ██╔╝ ██╔════╝ ██╔══██╗ ----- ----- ██║ ██║ ██║ ██████╔╝ ██████╔╝ ██║ ██║ █████╔╝ █████╗ ██████╔╝ ----- ----- ██║ ██║ ██║ ██╔══██╗ ██╔══██╗ ██║ ██║ ██╔═██╗ ██╔══╝ ██╔══██╗ ----- ----- ██║ ╚██████╔╝ ██████╔╝ ██║ ██║ ╚██████╔╝ ██║ ██╗ ███████╗ ██║ ██║ ----- ----- ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═╝ ╚═╝ ╚══════╝ ╚═╝ ╚═╝ ----- ----- ----- ----- Welcome to your ioBroker Docker container! ----- ----- Startupscript is now running! ----- ----- Please be patient! ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- System Information ----- ----- arch: x86_64 ----- ----- hostname: ioBrokerTWS ----- ----- ----- ----- Version Information ----- ----- image: v8.1.0 ----- ----- build: 2023-09-21T23:45:32+00:00 ----- ----- node: v18.17.1 ----- ----- npm: 9.6.7 ----- ----- ----- ----- Environment Variables ----- ----- SETGID: 1000 ----- ----- SETUID: 1000 ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- Step 1 of 5: Preparing container ----- -------------------------------------------------------------------------------- This is not the first run of this container. Skipping first run preparation. -------------------------------------------------------------------------------- ----- Step 2 of 5: Detecting ioBroker installation ----- -------------------------------------------------------------------------------- Existing installation of ioBroker detected in "/opt/iobroker". -------------------------------------------------------------------------------- ----- Step 3 of 5: Checking ioBroker installation ----- -------------------------------------------------------------------------------- (Re)setting permissions (This might take a while! Please be patient!)... Done. Fixing "sudo-bug" by replacing sudo with gosu... Done. Checking Database connection... Done. Hostname in ioBroker matches the hostname of this container. No action required. -------------------------------------------------------------------------------- ----- Step 4 of 5: Applying special settings ----- -------------------------------------------------------------------------------- Some adapters have special requirements/ settings which can be activated by the use of environment variables. For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs/). -------------------------------------------------------------------------------- ----- Step 5 of 5: ioBroker startup ----- -------------------------------------------------------------------------------- Starting ioBroker... ##### #### ### ## # iobroker.js-controller log output # ## ### #### ##### ================================== > LOG REDIRECT system.adapter.admin.0 => true [starting] host.ioBrokerTWS check instance "system.adapter.admin.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.javascript.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.node-red.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.scenes.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.telegram.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.telegram.1" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.hue.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.hue.1" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.ical.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.mihome-vacuum.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.mqtt-client.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.shelly.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.synology.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.unifi.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.discovery.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.backitup.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.doorbird.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.gruenbeck.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.info.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.iot.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.klf200.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.knx.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.lg-thinq.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.procon-ip.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.pvforecast.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.statistics.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.text2command.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.viessmannapi.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.web.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.yahka.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.mobile-alerts.0" for host "ioBrokerTWS" host.ioBrokerTWS check instance "system.adapter.e3dc-rscp.0" for host "ioBrokerTWS" Send diag info: {"uuid":"14bb1351-b2cb-4fb0-987e-3d35fb525e32","language":"de","country":"Germany","hosts":[{"version":"5.0.12","platform":"Javascript/Node.js","type":"linux"}],"node":"v18.17.1","arch":"x64","docker":true,"adapters":{"admin":{"version":"6.12.0","platform":"Javascript/Node.js"},"discovery":{"version":"3.1.0","platform":"Javascript/Node.js"},"backitup":{"version":"2.8.1","platform":"Javascript/Node.js"},"javascript":{"version":"7.1.4","platform":"Javascript/Node.js"},"alpha-ess":{"version":"1.0.2","platform":"Javascript/Node.js"},"device-reminder":{"version":"1.2.9","platform":"Javascript/Node.js"},"doorbird":{"version":"1.2.4","platform":"Javascript/Node.js"},"gruenbeck":{"version":"0.0.42","platform":"Javascript/Node.js"},"habpanel":{"version":"0.5.0","platform":"Javascript/Node.js"},"hue":{"version":"3.10.1","platform":"Javascript/Node.js"},"ical":{"version":"1.13.3","platform":"Javascript/Node.js"},"info":{"version":"2.0.0","platform":"Javascript/Node.js"},"iot":{"version":"1.14.5","platform":"Javascript/Node.js"},"klf200":{"version":"1.1.2","platform":"Javascript/Node.js"},"knx":{"version":"2.0.22","platform":"Javascript/Node.js"},"lg-thinq":{"version":"0.1.4","platform":"Javascript/Node.js"},"lgtv":{"version":"1.1.12","platform":"Javascript/Node.js"},"mihome":{"version":"1.4.0","platform":"Javascript/Node.js"},"mihome-vacuum":{"version":"4.0.0","platform":"Javascript/Node.js"},"mobile-alerts":{"version":"0.5.1","platform":"Javascript/Node.js"},"mqtt":{"version":"4.1.1","platform":"Javascript/Node.js"},"mqtt-client":{"version":"1.6.5","platform":"Javascript/Node.js"},"node-red":{"version":"4.0.3","platform":"Javascript/Node.js"},"procon-ip":{"version":"1.4.0","platform":"Javascript/Node.js"},"pvforecast":{"version":"2.8.1","platform":"Javascript/Node.js"},"scenes":{"version":"2.3.9","platform":"Javascript/Node.js"},"shelly":{"version":"6.4.5","platform":"Javascript/Node.js"},"simple-api":{"version":"2.7.2","platform":"Javascript/Node.js"},"socketio":{"version":"6.5.2","platform":"Javascript/Node.js"},"sprinklecontrol":{"version":"0.2.13","platform":"Javascript/Node.js"},"statistics":{"version":"2.3.0","platform":"Javascript/Node.js"},"synology":{"version":"3.0.0","platform":"Javascript/Node.js"},"telegram":{"version":"1.16.0","platform":"Javascript/Node.js"},"text2command":{"version":"3.0.2","platform":"Javascript/Node.js"},"unifi":{"version":"0.6.6","platform":"Javascript/Node.js"},"viessmannapi":{"version":"2.3.0","platform":"Javascript/Node.js"},"web":{"version":"6.1.0","platform":"Javascript/Node.js"},"ws":{"version":"2.5.3","platform":"Javascript/Node.js"},"yahka":{"version":"1.0.3","platform":"Javascript/Node.js"},"e3dc-rscp":{"version":"1.2.3","platform":"Javascript/Node.js"}},"statesType":"jsonl","objectsType":"jsonl","noInstances":32,"compactMode":false,"noCompactInstances":0,"model":"AMD GX-412TC SOC","cpus":4,"mem":4130750464,"ostype":"Linux","city":"Freital"} /bin/sh: 1: hcitool: not found ================================== > LOG REDIRECT system.adapter.admin.0 => true [system.adapter.admin.0.logging] Send diag info: {"uuid":"14bb1351-b2cb-4fb0-987e-3d35fb525e32","language":"de","country":"Germany","hosts":[{"version":"5.0.12","platform":"Javascript/Node.js","type":"linux"}],"node":"v18.17.1","arch":"x64","docker":true,"adapters":{"admin":{"version":"6.12.0","platform":"Javascript/Node.js"},"discovery":{"version":"3.1.0","platform":"Javascript/Node.js"},"backitup":{"version":"2.8.1","platform":"Javascript/Node.js"},"javascript":{"version":"7.1.4","platform":"Javascript/Node.js"},"alpha-ess":{"version":"1.0.2","platform":"Javascript/Node.js"},"device-reminder":{"version":"1.2.9","platform":"Javascript/Node.js"},"doorbird":{"version":"1.2.4","platform":"Javascript/Node.js"},"gruenbeck":{"version":"0.0.42","platform":"Javascript/Node.js"},"habpanel":{"version":"0.5.0","platform":"Javascript/Node.js"},"hue":{"version":"3.10.1","platform":"Javascript/Node.js"},"ical":{"version":"1.13.3","platform":"Javascript/Node.js"},"info":{"version":"2.0.0","platform":"Javascript/Node.js"},"iot":{"version":"1.14.5","platform":"Javascript/Node.js"},"klf200":{"version":"1.1.2","platform":"Javascript/Node.js"},"knx":{"version":"2.0.22","platform":"Javascript/Node.js"},"lg-thinq":{"version":"0.1.4","platform":"Javascript/Node.js"},"lgtv":{"version":"1.1.12","platform":"Javascript/Node.js"},"mihome":{"version":"1.4.0","platform":"Javascript/Node.js"},"mihome-vacuum":{"version":"4.0.0","platform":"Javascript/Node.js"},"mobile-alerts":{"version":"0.5.1","platform":"Javascript/Node.js"},"mqtt":{"version":"4.1.1","platform":"Javascript/Node.js"},"mqtt-client":{"version":"1.6.5","platform":"Javascript/Node.js"},"node-red":{"version":"4.0.3","platform":"Javascript/Node.js"},"procon-ip":{"version":"1.4.0","platform":"Javascript/Node.js"},"pvforecast":{"version":"2.8.1","platform":"Javascript/Node.js"},"scenes":{"version":"2.3.9","platform":"Javascript/Node.js"},"shelly":{"version":"6.4.5","platform":"Javascript/Node.js"},"simple-api":{"version":"2.7.2","platform":"Javascript/Node.js"},"socketio":{"version":"6.5.2","platform":"Javascript/Node.js"},"sprinklecontrol":{"version":"0.2.13","platform":"Javascript/Node.js"},"statistics":{"version":"2.3.0","platform":"Javascript/Node.js"},"synology":{"version":"3.0.0","platform":"Javascript/Node.js"},"telegram":{"version":"1.16.0","platform":"Javascript/Node.js"},"text2command":{"version":"3.0.2","platform":"Javascript/Node.js"},"unifi":{"version":"0.6.6","platform":"Javascript/Node.js"},"viessmannapi":{"version":"2.3.0","platform":"Javascript/Node.js"},"web":{"version":"6.1.0","platform":"Javascript/Node.js"},"ws":{"version":"2.5.3","platform":"Javascript/Node.js"},"yahka":{"version":"1.0.3","platform":"Javascript/Node.js"},"e3dc-rscp":{"version":"1.2.3","platform":"Javascript/Node.js"}},"statesType":"jsonl","objectsType":"jsonl","noInstances":32,"compactMode":false,"noCompactInstances":0,"model":"AMD GX-412TC SOC","cpus":4,"mem":4130750464,"ostype":"Linux","city":"Freital"} -
@mibr85 sagte in Alle Instanzen rot,:
irgendwas stimmt da nicht
jo, und wie kann man da jetzt helfen ohne Infos zu Deinem System ?
mal die Ausgabe von
iob diagbitte zeigen.
@djmarc75 sagte in Alle Instanzen rot,:
iob diag
Skript v.2023-10-10 *** BASE SYSTEM *** Hardware Vendor : PC Engines Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Virtualization : container-other Kernel : x86_64 Userland : amd64 Systemuptime and Load: 13:37:33 up 10 days, 20:49, 0 users, load average: 1.38, 1.56, 1.89 CPU threads: 4 *** Time and Time Zones *** Sun Nov 12 12:37:33 UTC 2023 Sun Nov 12 13:37:33 CET 2023 CET +0100 Etc/UTC *** User and Groups *** root /root root *** X-Server-Setup *** X-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 3.9G 2.4G 343M 9.0M 1.2G 1.3G Swap: 2.0G 769M 1.3G Total: 6.0G 3.1G 1.6G 3939 M total memory 2356 M used memory 1986 M active memory 1055 M inactive memory 343 M free memory 564 M buffer memory 675 M swap cache 2043 M total swap 769 M used swap 1274 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on overlay overlay 434G 39G 373G 10% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup shm tmpfs 64M 0 64M 0% /dev/shm /dev/mapper/system ext4 434G 39G 373G 10% /opt/iobroker tmpfs tmpfs 2.0G 0 2.0G 0% /proc/asound tmpfs tmpfs 2.0G 0 2.0G 0% /proc/acpi tmpfs tmpfs 2.0G 0 2.0G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS /opt/iobroker /dev/mapper/system[/var/lib/docker/volumes/iobroker_volume_new/_data] ext4 rw,noatime,discard,errors=remount-ro,data=ordered /etc/resolv.conf /dev/mapper/system[/var/lib/docker/containers/b8a23e09a240d48998b8749f2f7a8813378221bd5f2447cc348042651e82cbf0/resolv.conf] ext4 rw,noatime,discard,errors=remount-ro,data=ordered /etc/hostname /dev/mapper/system[/var/lib/docker/containers/b8a23e09a240d48998b8749f2f7a8813378221bd5f2447cc348042651e82cbf0/hostname] ext4 rw,noatime,discard,errors=remount-ro,data=ordered /etc/hosts /dev/mapper/system[/var/lib/docker/containers/b8a23e09a240d48998b8749f2f7a8813378221bd5f2447cc348042651e82cbf0/hosts] ext4 rw,noatime,discard,errors=remount-ro,data=ordered Files in neuralgic directories: /var: 34M /var/ 32M /var/lib 18M /var/lib/apt/lists 18M /var/lib/apt 14M /var/lib/dpkg /opt/iobroker/backups: 35M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 319M /opt/iobroker/iobroker-data/ 210M /opt/iobroker/iobroker-data/files 77M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 18M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map 11M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioBrokerTWS - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ioBrokerTWS - enabled + system.adapter.discovery.0 : discovery : ioBrokerTWS - enabled + system.adapter.doorbird.0 : doorbird : ioBrokerTWS - enabled + system.adapter.e3dc-rscp.0 : e3dc-rscp : ioBrokerTWS - enabled + system.adapter.gruenbeck.0 : gruenbeck : ioBrokerTWS - enabled + system.adapter.hue.0 : hue : ioBrokerTWS - enabled, port: 443 + system.adapter.hue.1 : hue : ioBrokerTWS - enabled, port: 443 system.adapter.ical.0 : ical : ioBrokerTWS - enabled + system.adapter.info.0 : info : ioBrokerTWS - enabled + system.adapter.iot.0 : iot : ioBrokerTWS - enabled + system.adapter.javascript.0 : javascript : ioBrokerTWS - enabled + system.adapter.klf200.0 : klf200 : ioBrokerTWS - enabled + system.adapter.knx.0 : knx : ioBrokerTWS - enabled system.adapter.lg-thinq.0 : lg-thinq : ioBrokerTWS - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBrokerTWS - enabled, port: 54321 + system.adapter.mqtt-client.0 : mqtt-client : ioBrokerTWS - enabled, port: 1883 system.adapter.node-red.0 : node-red : ioBrokerTWS - disabled, port: 1880, bind: 0.0.0.0 + system.adapter.procon-ip.0 : procon-ip : ioBrokerTWS - enabled system.adapter.pvforecast.0 : pvforecast : ioBrokerTWS - disabled system.adapter.scenes.0 : scenes : ioBrokerTWS - disabled + system.adapter.shelly.0 : shelly : ioBrokerTWS - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : ioBrokerTWS - enabled system.adapter.synology.0 : synology : ioBrokerTWS - disabled, port: 5001 + system.adapter.telegram.0 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBrokerTWS - enabled system.adapter.unifi.0 : unifi : ioBrokerTWS - disabled + system.adapter.viessmannapi.0 : viessmannapi : ioBrokerTWS - enabled + system.adapter.web.0 : web : ioBrokerTWS - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka : ioBrokerTWS - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerTWS - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBrokerTWS - enabled, port: 443 + system.adapter.hue.1 : hue : ioBrokerTWS - enabled, port: 443 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBrokerTWS - enabled, port: 54321 + system.adapter.mqtt-client.0 : mqtt-client : ioBrokerTWS - enabled, port: 1883 + system.adapter.shelly.0 : shelly : ioBrokerTWS - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerTWS - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "discovery" : 4.2.0 , installed 3.1.0 [Updatable] Adapter "doorbird" : 1.3.0 , installed 1.3.0 Adapter "e3dc-rscp" : 1.2.3 , installed 1.2.3 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "klf200" : 1.1.2 , installed 1.1.2 Adapter "knx" : 2.0.23 , installed 2.0.22 [Updatable] Adapter "lg-thinq" : 0.1.4 , installed 0.1.4 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "procon-ip" : 1.4.0 , installed 1.4.0 Adapter "pvforecast" : 2.9.0 , installed 2.9.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.2 [Updatable] Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "telegram" : 2.0.1 , installed 2.0.1 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "web" : 6.1.10 , installed 6.1.0 [Updatable] Adapter "ws" : 2.5.8 , installed 2.5.3 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and Statesleider ist mein Consolenfenster zuklein in der Portainer.io Container console, kann also nicht alles sehen.
Hier noch die zusammenfassung:
======================= SUMMARY ======================= v.2023-10-10 model name : AMD GX-412TC SOC Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Installation: Docker Kernel: x86_64 Userland: amd64 Timezone: Etc/UTC User-ID: 0 X-Server: false Pending OS-Updates: 33 Pending iob updates: 6 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.9G 2.4G 509M 8.0M 1.1G 1.3G Swap: 2.0G 770M 1.3G Total: 6.0G 3.1G 1.8G Active iob-Instances: 24 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBrokerTWS - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : ioBrokerTWS - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 22206 States: 16744 Size of iob-Database: 27M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
@djmarc75 sagte in Alle Instanzen rot,:
iob diag
Skript v.2023-10-10 *** BASE SYSTEM *** Hardware Vendor : PC Engines Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Virtualization : container-other Kernel : x86_64 Userland : amd64 Systemuptime and Load: 13:37:33 up 10 days, 20:49, 0 users, load average: 1.38, 1.56, 1.89 CPU threads: 4 *** Time and Time Zones *** Sun Nov 12 12:37:33 UTC 2023 Sun Nov 12 13:37:33 CET 2023 CET +0100 Etc/UTC *** User and Groups *** root /root root *** X-Server-Setup *** X-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 3.9G 2.4G 343M 9.0M 1.2G 1.3G Swap: 2.0G 769M 1.3G Total: 6.0G 3.1G 1.6G 3939 M total memory 2356 M used memory 1986 M active memory 1055 M inactive memory 343 M free memory 564 M buffer memory 675 M swap cache 2043 M total swap 769 M used swap 1274 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on overlay overlay 434G 39G 373G 10% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup shm tmpfs 64M 0 64M 0% /dev/shm /dev/mapper/system ext4 434G 39G 373G 10% /opt/iobroker tmpfs tmpfs 2.0G 0 2.0G 0% /proc/asound tmpfs tmpfs 2.0G 0 2.0G 0% /proc/acpi tmpfs tmpfs 2.0G 0 2.0G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS /opt/iobroker /dev/mapper/system[/var/lib/docker/volumes/iobroker_volume_new/_data] ext4 rw,noatime,discard,errors=remount-ro,data=ordered /etc/resolv.conf /dev/mapper/system[/var/lib/docker/containers/b8a23e09a240d48998b8749f2f7a8813378221bd5f2447cc348042651e82cbf0/resolv.conf] ext4 rw,noatime,discard,errors=remount-ro,data=ordered /etc/hostname /dev/mapper/system[/var/lib/docker/containers/b8a23e09a240d48998b8749f2f7a8813378221bd5f2447cc348042651e82cbf0/hostname] ext4 rw,noatime,discard,errors=remount-ro,data=ordered /etc/hosts /dev/mapper/system[/var/lib/docker/containers/b8a23e09a240d48998b8749f2f7a8813378221bd5f2447cc348042651e82cbf0/hosts] ext4 rw,noatime,discard,errors=remount-ro,data=ordered Files in neuralgic directories: /var: 34M /var/ 32M /var/lib 18M /var/lib/apt/lists 18M /var/lib/apt 14M /var/lib/dpkg /opt/iobroker/backups: 35M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 319M /opt/iobroker/iobroker-data/ 210M /opt/iobroker/iobroker-data/files 77M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 18M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map 11M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioBrokerTWS - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ioBrokerTWS - enabled + system.adapter.discovery.0 : discovery : ioBrokerTWS - enabled + system.adapter.doorbird.0 : doorbird : ioBrokerTWS - enabled + system.adapter.e3dc-rscp.0 : e3dc-rscp : ioBrokerTWS - enabled + system.adapter.gruenbeck.0 : gruenbeck : ioBrokerTWS - enabled + system.adapter.hue.0 : hue : ioBrokerTWS - enabled, port: 443 + system.adapter.hue.1 : hue : ioBrokerTWS - enabled, port: 443 system.adapter.ical.0 : ical : ioBrokerTWS - enabled + system.adapter.info.0 : info : ioBrokerTWS - enabled + system.adapter.iot.0 : iot : ioBrokerTWS - enabled + system.adapter.javascript.0 : javascript : ioBrokerTWS - enabled + system.adapter.klf200.0 : klf200 : ioBrokerTWS - enabled + system.adapter.knx.0 : knx : ioBrokerTWS - enabled system.adapter.lg-thinq.0 : lg-thinq : ioBrokerTWS - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBrokerTWS - enabled, port: 54321 + system.adapter.mqtt-client.0 : mqtt-client : ioBrokerTWS - enabled, port: 1883 system.adapter.node-red.0 : node-red : ioBrokerTWS - disabled, port: 1880, bind: 0.0.0.0 + system.adapter.procon-ip.0 : procon-ip : ioBrokerTWS - enabled system.adapter.pvforecast.0 : pvforecast : ioBrokerTWS - disabled system.adapter.scenes.0 : scenes : ioBrokerTWS - disabled + system.adapter.shelly.0 : shelly : ioBrokerTWS - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : ioBrokerTWS - enabled system.adapter.synology.0 : synology : ioBrokerTWS - disabled, port: 5001 + system.adapter.telegram.0 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBrokerTWS - enabled system.adapter.unifi.0 : unifi : ioBrokerTWS - disabled + system.adapter.viessmannapi.0 : viessmannapi : ioBrokerTWS - enabled + system.adapter.web.0 : web : ioBrokerTWS - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka : ioBrokerTWS - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerTWS - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBrokerTWS - enabled, port: 443 + system.adapter.hue.1 : hue : ioBrokerTWS - enabled, port: 443 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBrokerTWS - enabled, port: 54321 + system.adapter.mqtt-client.0 : mqtt-client : ioBrokerTWS - enabled, port: 1883 + system.adapter.shelly.0 : shelly : ioBrokerTWS - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerTWS - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerTWS - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "discovery" : 4.2.0 , installed 3.1.0 [Updatable] Adapter "doorbird" : 1.3.0 , installed 1.3.0 Adapter "e3dc-rscp" : 1.2.3 , installed 1.2.3 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "klf200" : 1.1.2 , installed 1.1.2 Adapter "knx" : 2.0.23 , installed 2.0.22 [Updatable] Adapter "lg-thinq" : 0.1.4 , installed 0.1.4 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "procon-ip" : 1.4.0 , installed 1.4.0 Adapter "pvforecast" : 2.9.0 , installed 2.9.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.2 [Updatable] Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "telegram" : 2.0.1 , installed 2.0.1 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "web" : 6.1.10 , installed 6.1.0 [Updatable] Adapter "ws" : 2.5.8 , installed 2.5.3 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and Statesleider ist mein Consolenfenster zuklein in der Portainer.io Container console, kann also nicht alles sehen.
Hier noch die zusammenfassung:
======================= SUMMARY ======================= v.2023-10-10 model name : AMD GX-412TC SOC Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Installation: Docker Kernel: x86_64 Userland: amd64 Timezone: Etc/UTC User-ID: 0 X-Server: false Pending OS-Updates: 33 Pending iob updates: 6 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.9G 2.4G 509M 8.0M 1.1G 1.3G Swap: 2.0G 770M 1.3G Total: 6.0G 3.1G 1.8G Active iob-Instances: 24 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBrokerTWS - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : ioBrokerTWS - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 22206 States: 16744 Size of iob-Database: 27M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
Node Version ist nicht aktuell und falsch installiert .
Und dann könnte Probleme mit den 2 Instanzen von HUE geben.
Wieso 2? -
@haselchen
wie bekomme ich die Node.js installation korrigiert?Ich habe zwei hue bridges also benötige ich auch zwei instanzen ;-)
https://forum.iobroker.net/topic/69067/neuer-befehl-iob-nodejs-update?_=1699794162915
Und das funktioniert mit den beiden Bridges?
Hatte ich auch mal , war eine Katastrophe. Kann sein das Philipps da nachgebessert hat.
Die Dinger laufen auf Port 443 bei Dir.
Hab da oft von Problemen gelesen. Workaround wäre 80.
Wie ist das Polling bei Beiden eingestellt ? -
https://forum.iobroker.net/topic/69067/neuer-befehl-iob-nodejs-update?_=1699794162915
Und das funktioniert mit den beiden Bridges?
Hatte ich auch mal , war eine Katastrophe. Kann sein das Philipps da nachgebessert hat.
Die Dinger laufen auf Port 443 bei Dir.
Hab da oft von Problemen gelesen. Workaround wäre 80.
Wie ist das Polling bei Beiden eingestellt ?@haselchen
der Link nützt mir leider nix da mein system im docker läuft..
mit den zwei Hue bridges läuft es problemlos auf standard einstellungen.Warum kommt beim antworten auf einen Beitrag und rechts öfters Fehler forbidden
-
@haselchen
der Link nützt mir leider nix da mein system im docker läuft..
mit den zwei Hue bridges läuft es problemlos auf standard einstellungen.Warum kommt beim antworten auf einen Beitrag und rechts öfters Fehler forbidden
-
@mibr85 sagte in Alle Instanzen rot,:
rechts öfters Fehler forbidden
weil Du wahrscheinlich mehrere Fenster (Tabs) vom Forum geöffnet hast ?!
-
@mibr85 sagte in Alle Instanzen rot,:
das dies ein Problem darstellt
Ein Problem stellt das nur dann dar wenn Du in den verschiedenen Tabs aktiv bist. Wenn Du dann in einem Anderen, nicht aktualisiertem Tab einen Beitrag schreibst/editierst dann kommt der Error.
Deshalb sollte man auch nur ein Tab aufmachen, dann klappts auch mit dem Nachbarn ;)Ist jetzt aber OffTopic genug... back to the roots - zu Deinem "Problem"
Ich vermute bei Dir einige Amok-Skripte. Da mal ansetzen
-
@mibr85 sagte in Alle Instanzen rot,:
das dies ein Problem darstellt
Ein Problem stellt das nur dann dar wenn Du in den verschiedenen Tabs aktiv bist. Wenn Du dann in einem Anderen, nicht aktualisiertem Tab einen Beitrag schreibst/editierst dann kommt der Error.
Deshalb sollte man auch nur ein Tab aufmachen, dann klappts auch mit dem Nachbarn ;)Ist jetzt aber OffTopic genug... back to the roots - zu Deinem "Problem"
Ich vermute bei Dir einige Amok-Skripte. Da mal ansetzen
@djmarc75
mhhh das es was mit meinen scripten zu tun hat, hatte ich auch schon im hinterkopf aber wie setz ich da bei der Fehlersuche am besten an? alle stoppen und einzeln wieder aktivieren? aber wo kann ich denn sehen das ein "Script amok läuft"? -
@djmarc75
mhhh das es was mit meinen scripten zu tun hat, hatte ich auch schon im hinterkopf aber wie setz ich da bei der Fehlersuche am besten an? alle stoppen und einzeln wieder aktivieren? aber wo kann ich denn sehen das ein "Script amok läuft"?@mibr85 sagte in Alle Instanzen rot,:
alle stoppen und einzeln wieder aktivieren?
geht, aber die 50/50 Mezhode ist schneller.
50% aktiviert lassen.
Problem -> davon 50% deaktivieren....
kein Problem -> von den übrigen 50% die Hälfte aktivieren.....@mibr85 sagte in Alle Instanzen rot,:
aber wo kann ich denn sehen das ein "Script amok läuft"?
an der erzeugten Last, z.B. mit
top -
@haselchen
der Link nützt mir leider nix da mein system im docker läuft..
mit den zwei Hue bridges läuft es problemlos auf standard einstellungen.Warum kommt beim antworten auf einen Beitrag und rechts öfters Fehler forbidden
Dann machste es halt so, wie ich es hier beschrieben habe:
https://forum.iobroker.net/topic/68035/iob-node-fix-skript/85?page=5
Allerdings müsstest Du vorher Deine Installation korrigieren.
Die Jetzige ist falsch installiert worden.
Das wird Dir zukünftig definitiv vor die Füsse fallen. -
Dann machste es halt so, wie ich es hier beschrieben habe:
https://forum.iobroker.net/topic/68035/iob-node-fix-skript/85?page=5
Allerdings müsstest Du vorher Deine Installation korrigieren.
Die Jetzige ist falsch installiert worden.
Das wird Dir zukünftig definitiv vor die Füsse fallen. -
@haselchen
ok aber wie kann ich denn meine istallation koorigieren mit iob fix?Mit einem aktuellen Docker.
-
Wäre auch meine Idee (von @Thomas-Braun )
Backup machen.
Neuen Container starten mit identischen Einstellungen und Backup einspielen. -
Wäre auch meine Idee (von @Thomas-Braun )
Backup machen.
Neuen Container starten mit identischen Einstellungen und Backup einspielen.Ja Habe ich gerade versucht einen ganz nackten Container mit neuem Volume aufzusetzen, leider startet der container nicht:
-------------------------------------------------------------------------------- ------------------------- 2023-11-12 15:35:11 ------------------------- -------------------------------------------------------------------------------- ----- ----- ----- ██╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗ ███████╗ ██████╗ ----- ----- ██║ ██╔═══██╗ ██╔══██╗ ██╔══██╗ ██╔═══██╗ ██║ ██╔╝ ██╔════╝ ██╔══██╗ ----- ----- ██║ ██║ ██║ ██████╔╝ ██████╔╝ ██║ ██║ █████╔╝ █████╗ ██████╔╝ ----- ----- ██║ ██║ ██║ ██╔══██╗ ██╔══██╗ ██║ ██║ ██╔═██╗ ██╔══╝ ██╔══██╗ ----- ----- ██║ ╚██████╔╝ ██████╔╝ ██║ ██║ ╚██████╔╝ ██║ ██╗ ███████╗ ██║ ██║ ----- ----- ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═╝ ╚═╝ ╚══════╝ ╚═╝ ╚═╝ ----- ----- ----- ----- Welcome to your ioBroker Docker container! ----- ----- Startupscript is now running! ----- ----- Please be patient! ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- System Information ----- ----- arch: x86_64 ----- ----- hostname: ioBrokerTWS ----- ----- ----- ----- Version Information ----- ----- image: v9.0.1 ----- ----- build: 2023-11-11T23:44:48+00:00 ----- ----- node: v18.18.2 ----- ----- node[22]: ../src/node_platform.cc:68:std::unique_ptr<long unsigned int> node::WorkerThreadsTaskRunner::DelayedTaskScheduler::Start(): Assertion `(0) == (uv_thread_create(t.get(), start_thread, this))' failed. 1: 0xb85bc0 node::Abort() [node] 2: 0xb85c3e [node] 3: 0xbf30fe [node] 4: 0xbf31e1 node::NodePlatform::NodePlatform(int, v8::TracingController*, v8::PageAllocator*) [node] 5: 0xb438f3 node::InitializeOncePerProcess(std::vector<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > > > const&, node::ProcessFlags::Flags) [node] 6: 0xb43f4b node::Start(int, char**) [node] 7: 0x7f489d0e71ca [/lib/x86_64-linux-gnu/libc.so.6] 8: 0x7f489d0e7285 __libc_start_main [/lib/x86_64-linux-gnu/libc.so.6] 9: 0xac1f4e _start [node] npm: ----- ----- ----- ----- Environment Variables ----- ----- SETGID: 1000 ----- ----- SETUID: 1000 ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- Step 1 of 5: Preparing container ----- -------------------------------------------------------------------------------- Updating Linux packages on first run... Error: Updating failed. Registering maintenance script as command... Done. -------------------------------------------------------------------------------- ----- Step 2 of 5: Detecting ioBroker installation ----- -------------------------------------------------------------------------------- Existing installation of ioBroker detected in "/opt/iobroker". -------------------------------------------------------------------------------- ----- Step 3 of 5: Checking ioBroker installation ----- -------------------------------------------------------------------------------- (Re)setting permissions (This might take a while! Please be patient!)... Done. Checking Database connection... Failed. Please check your configuration and try again. For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs). This Script will exit now. -
Ja Habe ich gerade versucht einen ganz nackten Container mit neuem Volume aufzusetzen, leider startet der container nicht:
-------------------------------------------------------------------------------- ------------------------- 2023-11-12 15:35:11 ------------------------- -------------------------------------------------------------------------------- ----- ----- ----- ██╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗ ███████╗ ██████╗ ----- ----- ██║ ██╔═══██╗ ██╔══██╗ ██╔══██╗ ██╔═══██╗ ██║ ██╔╝ ██╔════╝ ██╔══██╗ ----- ----- ██║ ██║ ██║ ██████╔╝ ██████╔╝ ██║ ██║ █████╔╝ █████╗ ██████╔╝ ----- ----- ██║ ██║ ██║ ██╔══██╗ ██╔══██╗ ██║ ██║ ██╔═██╗ ██╔══╝ ██╔══██╗ ----- ----- ██║ ╚██████╔╝ ██████╔╝ ██║ ██║ ╚██████╔╝ ██║ ██╗ ███████╗ ██║ ██║ ----- ----- ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═╝ ╚═╝ ╚══════╝ ╚═╝ ╚═╝ ----- ----- ----- ----- Welcome to your ioBroker Docker container! ----- ----- Startupscript is now running! ----- ----- Please be patient! ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- System Information ----- ----- arch: x86_64 ----- ----- hostname: ioBrokerTWS ----- ----- ----- ----- Version Information ----- ----- image: v9.0.1 ----- ----- build: 2023-11-11T23:44:48+00:00 ----- ----- node: v18.18.2 ----- ----- node[22]: ../src/node_platform.cc:68:std::unique_ptr<long unsigned int> node::WorkerThreadsTaskRunner::DelayedTaskScheduler::Start(): Assertion `(0) == (uv_thread_create(t.get(), start_thread, this))' failed. 1: 0xb85bc0 node::Abort() [node] 2: 0xb85c3e [node] 3: 0xbf30fe [node] 4: 0xbf31e1 node::NodePlatform::NodePlatform(int, v8::TracingController*, v8::PageAllocator*) [node] 5: 0xb438f3 node::InitializeOncePerProcess(std::vector<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > > > const&, node::ProcessFlags::Flags) [node] 6: 0xb43f4b node::Start(int, char**) [node] 7: 0x7f489d0e71ca [/lib/x86_64-linux-gnu/libc.so.6] 8: 0x7f489d0e7285 __libc_start_main [/lib/x86_64-linux-gnu/libc.so.6] 9: 0xac1f4e _start [node] npm: ----- ----- ----- ----- Environment Variables ----- ----- SETGID: 1000 ----- ----- SETUID: 1000 ----- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----- Step 1 of 5: Preparing container ----- -------------------------------------------------------------------------------- Updating Linux packages on first run... Error: Updating failed. Registering maintenance script as command... Done. -------------------------------------------------------------------------------- ----- Step 2 of 5: Detecting ioBroker installation ----- -------------------------------------------------------------------------------- Existing installation of ioBroker detected in "/opt/iobroker". -------------------------------------------------------------------------------- ----- Step 3 of 5: Checking ioBroker installation ----- -------------------------------------------------------------------------------- (Re)setting permissions (This might take a while! Please be patient!)... Done. Checking Database connection... Failed. Please check your configuration and try again. For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs). This Script will exit now. -
Wie genau aufgesetzt?
Da gibt es ja anscheinend x Möglichkeiten.
Ich mach das mit ner Synology.
Du vermutlich.....anders?! -
@haselchen
über Portainer auf einem Timberwolfserver. läuft eigentlich seit 2 Jahren ohne grössere Problem aber gerade hakt es
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden258
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge