NEWS
Gosund SP111 mit Tasmota 13.2.0 Problem mit DP
-
@ralfth sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
TelePeriod auf 10 gesetzt
ist auch keine so gute Idee, da das u Problemen führen kann, wenn das zu schnell aktualisiert wird. Dein Problem kommt aber wie oben schon geschrieben wurde von den veränderten topics. Bei topic kann st was ändern, bei full topic lässt man besser die Finger weg. Wenn das wieder geändert hast, dann die TelePeriod auch wieder höher setzten. Muss nicht unbedingt auf 300, aber 10 ist etwas grenzwertig.
@jan1 FullTopic hatte ich nie geändert und bei Topic stand vorher schon "tasmota" drin und hat einwandfrei funktioniert.
TelePeriod hatte ich auf 10 gesetzt weil ich vermutete, dass die Werte bei der Kaffeemaschine sich schneller ändern als abgefragt werden und daher das Problem entsteht. -
@ralla66 Habe jetzt Node-JS aktuell, Topic auf deinen Wert gesetzt, Full Topic war eh schon so wie bei dir.
Die DP's alle gelöscht und Instanz neu gestartet.
DP's wurden wieder angelegt.
Das Problem mit den DP's beginnend mit "ENERGY_" existiert immer noch, sie werden nicht aktualisiert.Hat jemand eine funktionierende Vorlage, die er mit Tasmota 13.2.0 verwendet?
Wir haben uns verirrt, kommen aber gut voran.
-
@ralla66 Habe jetzt Node-JS aktuell, Topic auf deinen Wert gesetzt, Full Topic war eh schon so wie bei dir.
Die DP's alle gelöscht und Instanz neu gestartet.
DP's wurden wieder angelegt.
Das Problem mit den DP's beginnend mit "ENERGY_" existiert immer noch, sie werden nicht aktualisiert.Hat jemand eine funktionierende Vorlage, die er mit Tasmota 13.2.0 verwendet?
telemetrieperiode Tasmota stelle auf 10 also 10 sec, nicht 300
zeig mal ein Bild der Tasmota Konsole was gesendet wird -
telemetrieperiode Tasmota stelle auf 10 also 10 sec, nicht 300
zeig mal ein Bild der Tasmota Konsole was gesendet wird -
Ich hab bei meinem Stromzähler die 300 gelassen. Wozu braucht man die Telemetriedaten so häufig? Die Messwerte werden natürlich häufiger übertragen.
-
@ralla66
Dann schreib das auch gleich dazu. Wie Thomas das schon geschrieben hat, die eigentlichen Werte werden eh recht aktuell übermittelt und somit braucht man hier keine dauerhafte Änderung.
Ich hatte das zu Beginn des Shutter Mode mal runter auf 10, weil man sonst nie wusste wie der Rollladen wirklich steht, was aber schnell in Tasmota und dem passenden DP im Adapter geändert wurde und die 300 wieder völlig ausreichen. Bei einigen Rollläden kam so viel Trafik zustande und ich hatte damit noch mehr Probleme. -
telemetrieperiode Tasmota stelle auf 10 also 10 sec, nicht 300
zeig mal ein Bild der Tasmota Konsole was gesendet wird@ralla66 Habe mal die Daten aus der Tasmota-Konsole kopiert
07:59:44.150 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T07:59:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":4,"Power":13,"ApparentPower":44,"ReactivePower":43,"Factor":0.28,"Voltage":225,"Current":0.197}} 08:00:34.168 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:00:34","Uptime":"0T12:14:08","UptimeSec":44048,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:00:34.184 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:00:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":0,"Power":15,"ApparentPower":45,"ReactivePower":42,"Factor":0.33,"Voltage":225,"Current":0.198}} 08:01:24.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:01:24","Uptime":"0T12:14:58","UptimeSec":44098,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:01:24.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:01:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.826,"Yesterday":0.600,"Today":0.226,"Period":3,"Power":15,"ApparentPower":45,"ReactivePower":43,"Factor":0.32,"Voltage":224,"Current":0.202}} 08:02:14.167 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:02:14","Uptime":"0T12:15:48","UptimeSec":44148,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:02:14.182 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:02:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.830,"Yesterday":0.600,"Today":0.230,"Period":3,"Power":11,"ApparentPower":45,"ReactivePower":44,"Factor":0.24,"Voltage":225,"Current":0.201}} 08:03:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:04","Uptime":"0T12:16:38","UptimeSec":44198,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:03:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.833,"Yesterday":0.600,"Today":0.233,"Period":3,"Power":16,"ApparentPower":48,"ReactivePower":45,"Factor":0.33,"Voltage":224,"Current":0.214}} 08:03:54.149 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:54","Uptime":"0T12:17:28","UptimeSec":44248,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:03:54.164 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.842,"Yesterday":0.600,"Today":0.242,"Period":9,"Power":798,"ApparentPower":798,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.581}} 08:04:44.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:04:44","Uptime":"0T12:18:18","UptimeSec":44298,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:04:44.146 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:04:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.849,"Yesterday":0.600,"Today":0.249,"Period":7,"Power":13,"ApparentPower":48,"ReactivePower":46,"Factor":0.27,"Voltage":225,"Current":0.212}} 08:05:34.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:05:34","Uptime":"0T12:19:08","UptimeSec":44348,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:05:34.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:05:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.852,"Yesterday":0.600,"Today":0.252,"Period":3,"Power":12,"ApparentPower":48,"ReactivePower":47,"Factor":0.24,"Voltage":224,"Current":0.215}} 08:06:24.152 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:06:24","Uptime":"0T12:19:58","UptimeSec":44398,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:06:24.167 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:06:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.856,"Yesterday":0.600,"Today":0.256,"Period":3,"Power":50,"ApparentPower":50,"ReactivePower":0,"Factor":1.00,"Voltage":225,"Current":0.222}} 08:07:14.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:07:14","Uptime":"0T12:20:48","UptimeSec":44448,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:07:14.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:07:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.863,"Yesterday":0.600,"Today":0.263,"Period":8,"Power":846,"ApparentPower":846,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.806}} 08:08:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:04","Uptime":"0T12:21:38","UptimeSec":44498,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":72,"Signal":-64,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:08:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.872,"Yesterday":0.600,"Today":0.272,"Period":8,"Power":851,"ApparentPower":851,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.827}} 08:08:54.164 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:54","Uptime":"0T12:22:28","UptimeSec":44548,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:08:54.180 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.877,"Yesterday":0.600,"Today":0.277,"Period":6,"Power":14,"ApparentPower":49,"ReactivePower":47,"Factor":0.28,"Voltage":223,"Current":0.219}} 08:09:44.147 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:09:44","Uptime":"0T12:23:18","UptimeSec":44598,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:09:44.161 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:09:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.881,"Yesterday":0.600,"Today":0.281,"Period":4,"Power":13,"ApparentPower":47,"ReactivePower":45,"Factor":0.28,"Voltage":225,"Current":0.210}} 08:10:34.155 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:10:34","Uptime":"0T12:24:08","UptimeSec":44648,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:10:34.171 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:10:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.884,"Yesterday":0.600,"Today":0.284,"Period":3,"Power":13,"ApparentPower":46,"ReactivePower":44,"Factor":0.27,"Voltage":225,"Current":0.202}} 08:11:24.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:11:24","Uptime":"0T12:24:58","UptimeSec":44698,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:11:24.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:11:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.887,"Yesterday":0.600,"Today":0.287,"Period":3,"Power":10,"ApparentPower":45,"ReactivePower":44,"Factor":0.21,"Voltage":225,"Current":0.202}} 08:12:14.172 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:12:14","Uptime":"0T12:25:48","UptimeSec":44748,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:12:14.187 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:12:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.890,"Yesterday":0.600,"Today":0.290,"Period":2,"Power":797,"ApparentPower":797,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.569}} 08:13:04.151 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:13:04","Uptime":"0T12:26:38","UptimeSec":44798,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}Wie man sehen kann sind die Werte drin und ändern sich auch. Leider nicht im ioBroker.
Wir haben uns verirrt, kommen aber gut voran.
-
@ralla66 Habe mal die Daten aus der Tasmota-Konsole kopiert
07:59:44.150 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T07:59:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":4,"Power":13,"ApparentPower":44,"ReactivePower":43,"Factor":0.28,"Voltage":225,"Current":0.197}} 08:00:34.168 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:00:34","Uptime":"0T12:14:08","UptimeSec":44048,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:00:34.184 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:00:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":0,"Power":15,"ApparentPower":45,"ReactivePower":42,"Factor":0.33,"Voltage":225,"Current":0.198}} 08:01:24.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:01:24","Uptime":"0T12:14:58","UptimeSec":44098,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:01:24.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:01:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.826,"Yesterday":0.600,"Today":0.226,"Period":3,"Power":15,"ApparentPower":45,"ReactivePower":43,"Factor":0.32,"Voltage":224,"Current":0.202}} 08:02:14.167 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:02:14","Uptime":"0T12:15:48","UptimeSec":44148,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:02:14.182 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:02:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.830,"Yesterday":0.600,"Today":0.230,"Period":3,"Power":11,"ApparentPower":45,"ReactivePower":44,"Factor":0.24,"Voltage":225,"Current":0.201}} 08:03:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:04","Uptime":"0T12:16:38","UptimeSec":44198,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:03:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.833,"Yesterday":0.600,"Today":0.233,"Period":3,"Power":16,"ApparentPower":48,"ReactivePower":45,"Factor":0.33,"Voltage":224,"Current":0.214}} 08:03:54.149 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:54","Uptime":"0T12:17:28","UptimeSec":44248,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:03:54.164 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.842,"Yesterday":0.600,"Today":0.242,"Period":9,"Power":798,"ApparentPower":798,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.581}} 08:04:44.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:04:44","Uptime":"0T12:18:18","UptimeSec":44298,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:04:44.146 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:04:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.849,"Yesterday":0.600,"Today":0.249,"Period":7,"Power":13,"ApparentPower":48,"ReactivePower":46,"Factor":0.27,"Voltage":225,"Current":0.212}} 08:05:34.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:05:34","Uptime":"0T12:19:08","UptimeSec":44348,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:05:34.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:05:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.852,"Yesterday":0.600,"Today":0.252,"Period":3,"Power":12,"ApparentPower":48,"ReactivePower":47,"Factor":0.24,"Voltage":224,"Current":0.215}} 08:06:24.152 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:06:24","Uptime":"0T12:19:58","UptimeSec":44398,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:06:24.167 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:06:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.856,"Yesterday":0.600,"Today":0.256,"Period":3,"Power":50,"ApparentPower":50,"ReactivePower":0,"Factor":1.00,"Voltage":225,"Current":0.222}} 08:07:14.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:07:14","Uptime":"0T12:20:48","UptimeSec":44448,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:07:14.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:07:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.863,"Yesterday":0.600,"Today":0.263,"Period":8,"Power":846,"ApparentPower":846,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.806}} 08:08:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:04","Uptime":"0T12:21:38","UptimeSec":44498,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":72,"Signal":-64,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:08:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.872,"Yesterday":0.600,"Today":0.272,"Period":8,"Power":851,"ApparentPower":851,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.827}} 08:08:54.164 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:54","Uptime":"0T12:22:28","UptimeSec":44548,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:08:54.180 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.877,"Yesterday":0.600,"Today":0.277,"Period":6,"Power":14,"ApparentPower":49,"ReactivePower":47,"Factor":0.28,"Voltage":223,"Current":0.219}} 08:09:44.147 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:09:44","Uptime":"0T12:23:18","UptimeSec":44598,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:09:44.161 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:09:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.881,"Yesterday":0.600,"Today":0.281,"Period":4,"Power":13,"ApparentPower":47,"ReactivePower":45,"Factor":0.28,"Voltage":225,"Current":0.210}} 08:10:34.155 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:10:34","Uptime":"0T12:24:08","UptimeSec":44648,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:10:34.171 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:10:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.884,"Yesterday":0.600,"Today":0.284,"Period":3,"Power":13,"ApparentPower":46,"ReactivePower":44,"Factor":0.27,"Voltage":225,"Current":0.202}} 08:11:24.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:11:24","Uptime":"0T12:24:58","UptimeSec":44698,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:11:24.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:11:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.887,"Yesterday":0.600,"Today":0.287,"Period":3,"Power":10,"ApparentPower":45,"ReactivePower":44,"Factor":0.21,"Voltage":225,"Current":0.202}} 08:12:14.172 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:12:14","Uptime":"0T12:25:48","UptimeSec":44748,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:12:14.187 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:12:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.890,"Yesterday":0.600,"Today":0.290,"Period":2,"Power":797,"ApparentPower":797,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.569}} 08:13:04.151 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:13:04","Uptime":"0T12:26:38","UptimeSec":44798,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}Wie man sehen kann sind die Werte drin und ändern sich auch. Leider nicht im ioBroker.
Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ? -
Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?Das werden sie doch aber, schau mal "Power", "ApparentPower" und "ReactivePower".
Genau das sind die Werte.Geflasht habe ich über die offizielle Tasmota-Seite
Und hier habe ich http://ota.tasmota.com/tasmota/release/tasmota-DE.bin.gz verwendet
Wir haben uns verirrt, kommen aber gut voran.
-
@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?Das werden sie doch aber, schau mal "Power", "ApparentPower" und "ReactivePower".
Genau das sind die Werte.Geflasht habe ich über die offizielle Tasmota-Seite
Und hier habe ich http://ota.tasmota.com/tasmota/release/tasmota-DE.bin.gz verwendet
-
die Gosund waren schon immer anspruchsvoll zu flashen.
Vermutlich die falsche Tasmota.bin.
Würde die Sensor.bin nehmen oder mal Tante Google befragen.
Und immer schön den Flash löschen. -
Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.FTDI fällt flach, da ich keine entsprechende Ausrüstung habe und die neueren Steckdosen geklebt sind.
Den Tasmota Online Installer kenne ich nicht und habe bis jetzt auch nicht rausbekommen wie er funktioniert. Gibt es dazu ne Anleitung?
Ursprünglich hatte ich mir diese Steckdosen gekauft weil man sie über OTA flashen kann.Wir haben uns verirrt, kommen aber gut voran.
-
@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.FTDI fällt flach, da ich keine entsprechende Ausrüstung habe und die neueren Steckdosen geklebt sind.
Den Tasmota Online Installer kenne ich nicht und habe bis jetzt auch nicht rausbekommen wie er funktioniert. Gibt es dazu ne Anleitung?
Ursprünglich hatte ich mir diese Steckdosen gekauft weil man sie über OTA flashen kann. -
Hat jemand für die Gosund SP111 ein Template, das mit Tasmota 13.2.0 funktioniert?
Wenn nein, mit welcher Tasmota-Version und welchem Template funktioniert es bei euch?Ich habe da jetzt einiges probiert.
Die Vorlagen von Blakadder werden beim speichern konvertiert. Konkret dürfte es sich dabei um die Werte der GPIO 4,5 und 12 handeln.Das Template von Blakadder für die Gosund SP111 mit 3450 Watt lautet:
{"NAME":"Gosund SP111 v1.1","GPIO":[56,0,158,0,132,134,0,0,131,17,0,21,0],"FLAG":0,"BASE":45}Dies wird bei mir nach dem speichern in das umgewandelt:
{"NAME":"Gosund SP111 v1.1","GPIO":[320,0,576,0,2656,2720,0,0,2624,32,0,224,0,0],"FLAG":0,"BASE":45}Das wesentliche Problem dabei scheint zu sein, dass die DP im ioBroker angelegt, aber nur einmal aktualisiert werden. Verwende ich die Powertaste auf der Weboberfläche der Gosund so wird der DP im ioBroker nicht aktualisiert. Ich kann jedoch sehr wohl den DP "Power" im ioBroker ändern und der steuert die Gosund entsprechend.
Das ist alles sehr verwirrend.
Wir haben uns verirrt, kommen aber gut voran.
-
Hat jemand für die Gosund SP111 ein Template, das mit Tasmota 13.2.0 funktioniert?
Wenn nein, mit welcher Tasmota-Version und welchem Template funktioniert es bei euch?Ich habe da jetzt einiges probiert.
Die Vorlagen von Blakadder werden beim speichern konvertiert. Konkret dürfte es sich dabei um die Werte der GPIO 4,5 und 12 handeln.Das Template von Blakadder für die Gosund SP111 mit 3450 Watt lautet:
{"NAME":"Gosund SP111 v1.1","GPIO":[56,0,158,0,132,134,0,0,131,17,0,21,0],"FLAG":0,"BASE":45}Dies wird bei mir nach dem speichern in das umgewandelt:
{"NAME":"Gosund SP111 v1.1","GPIO":[320,0,576,0,2656,2720,0,0,2624,32,0,224,0,0],"FLAG":0,"BASE":45}Das wesentliche Problem dabei scheint zu sein, dass die DP im ioBroker angelegt, aber nur einmal aktualisiert werden. Verwende ich die Powertaste auf der Weboberfläche der Gosund so wird der DP im ioBroker nicht aktualisiert. Ich kann jedoch sehr wohl den DP "Power" im ioBroker ändern und der steuert die Gosund entsprechend.
Das ist alles sehr verwirrend.
@ralfth sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
Dies wird bei mir nach dem speichern in das umgewandelt:
das ist wohl der Fehler,
wenn in other Parameters das neue Template eingefügt und Aktiviert wird
ist das neue Template nach einem reboot aktiv. -
@ralfth sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:
Dies wird bei mir nach dem speichern in das umgewandelt:
das ist wohl der Fehler,
wenn in other Parameters das neue Template eingefügt und Aktiviert wird
ist das neue Template nach einem reboot aktiv.@ralla66 das hilft mir jetzt nicht so recht weiter, Denn genau bei dem von dir beschriebenen Vorgang passiert ja das oben geschilderte. D.h. Tasmota konvertiert das selbstständig auf die neuen Werte.
Wir haben uns verirrt, kommen aber gut voran.
-
@ralla66 das hilft mir jetzt nicht so recht weiter, Denn genau bei dem von dir beschriebenen Vorgang passiert ja das oben geschilderte. D.h. Tasmota konvertiert das selbstständig auf die neuen Werte.
ok, dann kann ich nur anbieten das heute Abend mal auf einem ESP8266 / 32 zu testen.
Mal die Sensor.bin geflasht und unter Info mal geschaut ob die auch geflasht wurde ?
Mal einen Reset über Taster oder so getestet ? -
@ralla66 das hilft mir jetzt nicht so recht weiter, Denn genau bei dem von dir beschriebenen Vorgang passiert ja das oben geschilderte. D.h. Tasmota konvertiert das selbstständig auf die neuen Werte.
getestet auf ESP 8266 Tasmota 13.2 -> laufen alle Template
umgeschrieben wird das Template auch.
2656 ist HLWBL CF1 HLW8012/HJL-01/BL0937 energy monitoring
erst einmal nicht verkehrt.
Support us
357
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge