Gosund SP111 mit Tasmota 13.2.0 Problem mit DP

RalfTh

@thomas-braun Dieser Befehl funktioniert bei mir nicht.

Ralla66

@ralfth

Das liegt ja an deiner Änderung, entweder Name oder Tasmota Version.
Der Empfehlung von Thomas Braun so wieso folgen.

Thomas Braun

@ralfth sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

Dieser Befehl funktioniert bei mir nicht.

Dann fix es:

iob stop
iob fix
iob nodejs-update

RalfTh

@ralla66 Kannst du mir nicht mal deine Einträge zu den von dir genannten Punkten nennen?

Ralla66

@ralfth

default Werte

Jan1

@ralfth sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

TelePeriod auf 10 gesetzt

ist auch keine so gute Idee, da das u Problemen führen kann, wenn das zu schnell aktualisiert wird. Dein Problem kommt aber wie oben schon geschrieben wurde von den veränderten topics. Bei topic kann st was ändern, bei full topic lässt man besser die Finger weg. Wenn das wieder geändert hast, dann die TelePeriod auch wieder höher setzten. Muss nicht unbedingt auf 300, aber 10 ist etwas grenzwertig.

RalfTh

@jan1 FullTopic hatte ich nie geändert und bei Topic stand vorher schon "tasmota" drin und hat einwandfrei funktioniert.
TelePeriod hatte ich auf 10 gesetzt weil ich vermutete, dass die Werte bei der Kaffeemaschine sich schneller ändern als abgefragt werden und daher das Problem entsteht.

RalfTh

@ralla66 Habe jetzt Node-JS aktuell, Topic auf deinen Wert gesetzt, Full Topic war eh schon so wie bei dir.
Die DP's alle gelöscht und Instanz neu gestartet.
DP's wurden wieder angelegt.
Das Problem mit den DP's beginnend mit "ENERGY_" existiert immer noch, sie werden nicht aktualisiert.

Hat jemand eine funktionierende Vorlage, die er mit Tasmota 13.2.0 verwendet?

Ralla66

@ralfth

telemetrieperiode Tasmota stelle auf 10 also 10 sec, nicht 300
zeig mal ein Bild der Tasmota Konsole was gesendet wird

Jan1

@ralla66
10 ist grenzwertig

Thomas Braun

Ich hab bei meinem Stromzähler die 300 gelassen. Wozu braucht man die Telemetriedaten so häufig? Die Messwerte werden natürlich häufiger übertragen.

Ralla66

@jan1

nur zum Test

Jan1

@ralla66
Dann schreib das auch gleich dazu. Wie Thomas das schon geschrieben hat, die eigentlichen Werte werden eh recht aktuell übermittelt und somit braucht man hier keine dauerhafte Änderung.
Ich hatte das zu Beginn des Shutter Mode mal runter auf 10, weil man sonst nie wusste wie der Rollladen wirklich steht, was aber schnell in Tasmota und dem passenden DP im Adapter geändert wurde und die 300 wieder völlig ausreichen. Bei einigen Rollläden kam so viel Trafik zustande und ich hatte damit noch mehr Probleme.

RalfTh

@ralla66 Habe mal die Daten aus der Tasmota-Konsole kopiert

07:59:44.150 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T07:59:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":4,"Power":13,"ApparentPower":44,"ReactivePower":43,"Factor":0.28,"Voltage":225,"Current":0.197}}
08:00:34.168 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:00:34","Uptime":"0T12:14:08","UptimeSec":44048,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:00:34.184 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:00:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":0,"Power":15,"ApparentPower":45,"ReactivePower":42,"Factor":0.33,"Voltage":225,"Current":0.198}}
08:01:24.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:01:24","Uptime":"0T12:14:58","UptimeSec":44098,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:01:24.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:01:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.826,"Yesterday":0.600,"Today":0.226,"Period":3,"Power":15,"ApparentPower":45,"ReactivePower":43,"Factor":0.32,"Voltage":224,"Current":0.202}}
08:02:14.167 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:02:14","Uptime":"0T12:15:48","UptimeSec":44148,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:02:14.182 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:02:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.830,"Yesterday":0.600,"Today":0.230,"Period":3,"Power":11,"ApparentPower":45,"ReactivePower":44,"Factor":0.24,"Voltage":225,"Current":0.201}}
08:03:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:04","Uptime":"0T12:16:38","UptimeSec":44198,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:03:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.833,"Yesterday":0.600,"Today":0.233,"Period":3,"Power":16,"ApparentPower":48,"ReactivePower":45,"Factor":0.33,"Voltage":224,"Current":0.214}}
08:03:54.149 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:54","Uptime":"0T12:17:28","UptimeSec":44248,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:03:54.164 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.842,"Yesterday":0.600,"Today":0.242,"Period":9,"Power":798,"ApparentPower":798,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.581}}
08:04:44.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:04:44","Uptime":"0T12:18:18","UptimeSec":44298,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:04:44.146 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:04:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.849,"Yesterday":0.600,"Today":0.249,"Period":7,"Power":13,"ApparentPower":48,"ReactivePower":46,"Factor":0.27,"Voltage":225,"Current":0.212}}
08:05:34.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:05:34","Uptime":"0T12:19:08","UptimeSec":44348,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:05:34.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:05:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.852,"Yesterday":0.600,"Today":0.252,"Period":3,"Power":12,"ApparentPower":48,"ReactivePower":47,"Factor":0.24,"Voltage":224,"Current":0.215}}
08:06:24.152 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:06:24","Uptime":"0T12:19:58","UptimeSec":44398,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:06:24.167 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:06:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.856,"Yesterday":0.600,"Today":0.256,"Period":3,"Power":50,"ApparentPower":50,"ReactivePower":0,"Factor":1.00,"Voltage":225,"Current":0.222}}
08:07:14.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:07:14","Uptime":"0T12:20:48","UptimeSec":44448,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:07:14.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:07:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.863,"Yesterday":0.600,"Today":0.263,"Period":8,"Power":846,"ApparentPower":846,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.806}}
08:08:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:04","Uptime":"0T12:21:38","UptimeSec":44498,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":72,"Signal":-64,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:08:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.872,"Yesterday":0.600,"Today":0.272,"Period":8,"Power":851,"ApparentPower":851,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.827}}
08:08:54.164 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:54","Uptime":"0T12:22:28","UptimeSec":44548,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:08:54.180 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.877,"Yesterday":0.600,"Today":0.277,"Period":6,"Power":14,"ApparentPower":49,"ReactivePower":47,"Factor":0.28,"Voltage":223,"Current":0.219}}
08:09:44.147 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:09:44","Uptime":"0T12:23:18","UptimeSec":44598,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:09:44.161 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:09:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.881,"Yesterday":0.600,"Today":0.281,"Period":4,"Power":13,"ApparentPower":47,"ReactivePower":45,"Factor":0.28,"Voltage":225,"Current":0.210}}
08:10:34.155 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:10:34","Uptime":"0T12:24:08","UptimeSec":44648,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:10:34.171 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:10:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.884,"Yesterday":0.600,"Today":0.284,"Period":3,"Power":13,"ApparentPower":46,"ReactivePower":44,"Factor":0.27,"Voltage":225,"Current":0.202}}
08:11:24.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:11:24","Uptime":"0T12:24:58","UptimeSec":44698,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:11:24.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:11:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.887,"Yesterday":0.600,"Today":0.287,"Period":3,"Power":10,"ApparentPower":45,"ReactivePower":44,"Factor":0.21,"Voltage":225,"Current":0.202}}
08:12:14.172 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:12:14","Uptime":"0T12:25:48","UptimeSec":44748,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:12:14.187 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:12:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.890,"Yesterday":0.600,"Today":0.290,"Period":2,"Power":797,"ApparentPower":797,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.569}}
08:13:04.151 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:13:04","Uptime":"0T12:26:38","UptimeSec":44798,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}

Wie man sehen kann sind die Werte drin und ändern sich auch. Leider nicht im ioBroker.

Ralla66

@ralfth

Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?

RalfTh

@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

@ralfth

Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?

Das werden sie doch aber, schau mal "Power", "ApparentPower" und "ReactivePower".
Genau das sind die Werte.

Geflasht habe ich über die offizielle Tasmota-Seite

Und hier habe ich http://ota.tasmota.com/tasmota/release/tasmota-DE.bin.gz verwendet

Ralla66

@ralfth

die Gosund waren schon immer anspruchsvoll zu flashen.
Vermutlich die falsche Tasmota.bin.
Würde die Sensor.bin nehmen oder mal Tante Google befragen.
Und immer schön den Flash löschen.

RalfTh

@ralla66 Was meinst du mit Flash löschen? Ich bin da kein Spezialist.

Ralla66

@ralfth

Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.

RalfTh

@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

@ralfth

Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.

FTDI fällt flach, da ich keine entsprechende Ausrüstung habe und die neueren Steckdosen geklebt sind.
Den Tasmota Online Installer kenne ich nicht und habe bis jetzt auch nicht rausbekommen wie er funktioniert. Gibt es dazu ne Anleitung?
Ursprünglich hatte ich mir diese Steckdosen gekauft weil man sie über OTA flashen kann.

NEWS

Gosund SP111 mit Tasmota 13.2.0 Problem mit DP

Gosund SP111 mit Tasmota 13.2.0 Problem mit DP

Support us

608

32.4k

81.3k

1.3m