NEWS
Test Adapter shuttercontrol v2.0.x
Tester
7.4k
Beiträge
332
Kommentatoren
10.6m
Aufrufe
254
Watching
-
@watcherkb sagte in Test Adapter shuttercontrol v1.6.x:
@simatec
seit der Version 1.6.0 fahren ein paar Rollos nicht mehr aus dem Sunprotect wieder hoch, d.h. sie bleiben unten obwohl die Sonne schon woanders ist. Es geht hier in dem Fall um die EG-GästeWC oder EG-HWR-*
Ich finde leider den Fehler nicht.Edit: das Fenster OG-Flur-Balkon läuft aber prima und ist auch auf derselben Seite wie die anderen Fenster.
Settings
Ich habe das gleiche Thema: Rollladen öffnen nach Sonnenschutzende durch Sonnenstand (Azimuth) nicht mehr. Hitzeschutz ist aktiviert, aber die Trigger-Temperatur ist nicht erreicht. Im Log wird Heat Protect mit active markiert, obwohl die eingestellte Temperatur (30 C) nicht erreicht ist.
Was habe ich falsch konfiguriert?
@axel sagte in Test Adapter shuttercontrol v1.6.x:
Im Log wird Heat Protect mit active markiert, obwohl die eingestellte Temperatur (30 C) nicht erreicht ist.
bitte zeigen!
als text in code-tags -
@axel sagte in Test Adapter shuttercontrol v1.6.x:
Im Log wird Heat Protect mit active markiert, obwohl die eingestellte Temperatur (30 C) nicht erreicht ist.
bitte zeigen!
als text in code-tags -
@homoran leider nur als formatiertes Excel möglich, oder wie ändere ich das Ziel des Log-Download?
@axel sagte in Test Adapter shuttercontrol v1.6.x:
oder wie ändere ich das Ziel des Log-Download?
das geht üblicherweise direkt im Browser auf.
oder hast du "Speichern unter..." konfiguriert?
-
@axel sagte in Test Adapter shuttercontrol v1.6.x:
oder wie ändere ich das Ziel des Log-Download?
das geht üblicherweise direkt im Browser auf.
oder hast du "Speichern unter..." konfiguriert?
@homoran iobroker.2023-09-08.log
So sieht das nach "Speichern unter..." aus.QNAP 677 VM 16 ´GB, 4 Kerne, 3,4 GHz
17.258 Objekte
15.633 Zustände -
@homoran iobroker.2023-09-08.log
So sieht das nach "Speichern unter..." aus.@axel bitte als Text in code-tags posten.
das nutzt mir alles am Handy nichts!https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1
-
@homoran iobroker.2023-09-08.log
So sieht das nach "Speichern unter..." aus. -
@axel Bitte poste nur den relevanten Code von Shuttercontrol. Der komplette Log ist sonst sehr unübersichtlich.
-
@axel Bitte poste nur den relevanten Code von Shuttercontrol. Der komplette Log ist sonst sehr unübersichtlich.
-
-
@simatec Wie sieht es damit aus? Mit VSC in C++ gespeichert und gezipt, da zu groß...
@axel sagte in Test Adapter shuttercontrol v1.6.x:
da zu groß...
dann nur den relevanten Zeitabschnitt.
soooo viel sollte das nicht sein. -
@axel sagte in Test Adapter shuttercontrol v1.6.x:
da zu groß...
dann nur den relevanten Zeitabschnitt.
soooo viel sollte das nicht sein.@homoran Also, ich habe jetzt alles probiert. Zugriff auf das original log file. Wie genau müssen die Tags ausshen?
Beispielsweise so:
<Zeile 1
Zeile 2
Zeile n>oder
<Zeile 1>
<Zeile 2>
<Zeile n>oder HTML-Tags und wenn ja, welche?
QNAP 677 VM 16 ´GB, 4 Kerne, 3,4 GHz
17.258 Objekte
15.633 Zustände -
@homoran Also, ich habe jetzt alles probiert. Zugriff auf das original log file. Wie genau müssen die Tags ausshen?
Beispielsweise so:
<Zeile 1
Zeile 2
Zeile n>oder
<Zeile 1>
<Zeile 2>
<Zeile n>oder HTML-Tags und wenn ja, welche?
@axel sagte in Test Adapter shuttercontrol v1.6.x:
. Wie genau müssen die Tags ausshen?
steht alles hier
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1
und noch viel gutes mehr.
-
@homoran Also, ich habe jetzt alles probiert. Zugriff auf das original log file. Wie genau müssen die Tags ausshen?
Beispielsweise so:
<Zeile 1
Zeile 2
Zeile n>oder
<Zeile 1>
<Zeile 2>
<Zeile n>oder HTML-Tags und wenn ja, welche?
@axel sagte in Test Adapter shuttercontrol v1.6.x:
Wie genau müssen die Tags ausshen?
Nix mit Tags oder sonstigem PiPaPo.
Filtere zB mit Notepad++ nach
shuttercontrol.0und dann einfach copy & paste hier in
-
@axel sagte in Test Adapter shuttercontrol v1.6.x:
. Wie genau müssen die Tags ausshen?
steht alles hier
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1
und noch viel gutes mehr.
@homoran Ich habe aus dem Log-File ein paar Zeilen kopiert und die Tags angewendet. Das sieht dann so aus. Ich glaube aber, dass das nicht das erwartete Ergebnis ist, oder?
Und: Bei der Log-File Erstellung kann ich die Quelle zwar filtern, es wird aber immer ALLES herunter geladen...
2023-09-12 00:00:00.004 - [34mdebug[39m: shuttercontrol.0 (4591) calculate astrodata ... 2023-09-12 00:00:00.007 - [34mdebug[39m: shuttercontrol.0 (4591) Sun Azimut: 336.5° 2023-09-12 00:00:00.007 - [34mdebug[39m: shuttercontrol.0 (4591) Sun Elevation: -33.9°QNAP 677 VM 16 ´GB, 4 Kerne, 3,4 GHz
17.258 Objekte
15.633 Zustände -
@homoran Ich habe aus dem Log-File ein paar Zeilen kopiert und die Tags angewendet. Das sieht dann so aus. Ich glaube aber, dass das nicht das erwartete Ergebnis ist, oder?
Und: Bei der Log-File Erstellung kann ich die Quelle zwar filtern, es wird aber immer ALLES herunter geladen...
2023-09-12 00:00:00.004 - [34mdebug[39m: shuttercontrol.0 (4591) calculate astrodata ... 2023-09-12 00:00:00.007 - [34mdebug[39m: shuttercontrol.0 (4591) Sun Azimut: 336.5° 2023-09-12 00:00:00.007 - [34mdebug[39m: shuttercontrol.0 (4591) Sun Elevation: -33.9°@axel sagte in Test Adapter shuttercontrol v1.6.x:
Ich glaube aber, dass das nicht das erwartete Ergebnis ist, oder?
knapp daneben :-)
die Stelle mit
@axel sagte in Test Adapter shuttercontrol v1.6.x:
Hitzeschutz ist aktiviert, aber die Trigger-Temperatur ist nicht erreicht. Im Log wird Heat Protect mit active markiert, obwohl die eingestellte Temperatur (30 C) nicht erreicht ist.
Wäre interessant
-
@axel sagte in Test Adapter shuttercontrol v1.6.x:
Ich glaube aber, dass das nicht das erwartete Ergebnis ist, oder?
knapp daneben :-)
die Stelle mit
@axel sagte in Test Adapter shuttercontrol v1.6.x:
Hitzeschutz ist aktiviert, aber die Trigger-Temperatur ist nicht erreicht. Im Log wird Heat Protect mit active markiert, obwohl die eingestellte Temperatur (30 C) nicht erreicht ist.
Wäre interessant
@homoran Ja, das war nur ein Test, ob ich es richtig mache. Nun habe ich einen Tag log durchgesehen und werde aber nicht schlau draus.
Heat Protect funktioniert nicht wie erwartet. Es gibt laufend Meldungen mit Heat Protect active, die Temperatur spielt dabei keine Rolle. Wenn ich das richtig verstanden habe, ist der Wert Heat Protect (bei mir auf 30 C eingestellt) für alle Rollladen gültig.
Hier mal die wichtigsten logs und die Einstellungen.
system.adapter.shuttercontrol.0(6).json
2023-09-11 13:30:39.299 - [34mdebug[39m: shuttercontrol.0 (2083) Brightness State Down is: false 2023-09-11 13:30:41.315 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WC_Roll:4.LEVEL is active 2023-09-11 13:30:51.317 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for SZ_Roll:4.LEVEL is active 2023-09-11 13:31:01.321 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for AKL_Roll:4.LEVEL is active 2023-09-11 13:31:35.391 - [34mdebug[39m: shuttercontrol.0 (2083) insidetemperature changed: hm-rpc.2.000A9D89921CB3.1.ACTUAL_TEMPERATURE Value: 26.7 2023-09-11 13:31:37.393 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for Büro_Roll is active 2023-09-11 13:31:41.330 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WZ_Roll_STür_R:4.LEVEL is active 2023-09-11 13:31:47.399 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WC_Roll:4.LEVEL is active 2023-09-11 13:31:51.332 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for K_Roll_R:4.LEVEL is active 2023-09-11 13:31:57.401 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for SZ_Roll:4.LEVEL is active 2023-09-11 13:32:01.335 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for K_Roll_L:4.LEVEL is active 2023-09-11 13:32:05.225 - [34mdebug[39m: shuttercontrol.0 (2083) Lightsensor changed: hm-rpc.2.000D5BE9A467DE.1.CURRENT_ILLUMINATION Value: 5483 2023-09-11 13:32:05.772 - [34mdebug[39m: shuttercontrol.0 (2083) outsidetemperature changed: hm-rpc.2.000EDBE9A1B50F.1.ACTUAL_TEMPERATURE Value: 30.5 2023-09-11 13:32:07.228 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for Büro_Roll is active 2023-09-11 13:32:07.403 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for AKL_Roll:4.LEVEL is active 2023-09-11 13:32:07.774 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for Büro_Roll is active 2023-09-11 13:32:11.338 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for HWR_Roll:4.LEVEL is active 2023-09-11 13:32:17.230 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WC_Roll:4.LEVEL is active 2023-09-11 13:32:17.776 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WC_Roll:4.LEVEL is active 2023-09-11 13:32:21.341 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for BZ_Rolladen:4.LEVEL is active 2023-09-11 13:32:27.231 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for SZ_Roll:4.LEVEL is active 2023-09-11 13:32:27.777 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for SZ_Roll:4.LEVEL is active 2023-09-11 13:32:37.234 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for AKL_Roll:4.LEVEL is active 2023-09-11 13:32:47.416 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WZ_Roll_STür_R:4.LEVEL is active 2023-09-11 13:32:57.418 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for K_Roll_R:4.LEVEL is active 2023-09-11 13:33:07.421 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for K_Roll_L:4.LEVEL is active 2023-09-11 13:33:17.242 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for WZ_Roll_STür_R:4.LEVEL is active 2023-09-11 13:33:17.423 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for HWR_Roll:4.LEVEL is active 2023-09-11 13:33:27.244 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for K_Roll_R:4.LEVEL is active 2023-09-11 13:33:27.426 - [34mdebug[39m: shuttercontrol.0 (2083) Heat Protection for BZ_Rolladen:4.LEVEL is activeBei Sun Protect werden die Rollladen nicht geöffnet, wenn der Azimuth ausserhalb der Definition ist.
Bei 90 + 25 Grad Azimut soll K_Roll_L wieder auf gehen. Passiert leider nicht.
2023-09-11 09:35:00.004 - [34mdebug[39m: shuttercontrol.0 (1738815) Sun Azimut: 114.2° 2023-09-11 09:35:00.004 - [34mdebug[39m: shuttercontrol.0 (1738815) Sun Elevation: 25.6° 2023-09-11 09:35:02.068 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:35:02.296 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness sensor value: 7681 2023-09-11 09:35:02.308 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.00185BE9A574BC.1.ACTUAL_TEMPERATURE Value: 23.8 2023-09-11 09:35:02.310 - [34mdebug[39m: shuttercontrol.0 (1738815) Alarm Rain changed: false 2023-09-11 09:35:02.310 - [34mdebug[39m: shuttercontrol.0 (1738815) start shutterAlarm 2023-09-11 09:35:02.315 - [32minfo[39m: shuttercontrol.0 (1738815) Lightsensor #7 Will open ID: Dachfenster value: 1% after the window has been closed 2023-09-11 09:35:02.315 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger height: 1% 2023-09-11 09:35:02.315 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger action: up 2023-09-11 09:35:04.309 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:35:12.296 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness State Down is: false 2023-09-11 09:36:53.128 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.000EDBE9A1B50F.1.ACTUAL_TEMPERATURE Value: 32.5 2023-09-11 09:36:55.131 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:37:17.293 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness sensor value: 7681 2023-09-11 09:37:17.301 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.00185BE9A574BC.1.ACTUAL_TEMPERATURE Value: 24 2023-09-11 09:37:17.303 - [34mdebug[39m: shuttercontrol.0 (1738815) Alarm Rain changed: false 2023-09-11 09:37:17.303 - [34mdebug[39m: shuttercontrol.0 (1738815) start shutterAlarm 2023-09-11 09:37:17.346 - [32minfo[39m: shuttercontrol.0 (1738815) Lightsensor #7 Will open ID: Dachfenster value: 1% after the window has been closed 2023-09-11 09:37:17.346 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger height: 1% 2023-09-11 09:37:17.346 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger action: up 2023-09-11 09:37:19.301 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:37:27.294 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness State Down is: false 2023-09-11 09:38:57.882 - [34mdebug[39m: shuttercontrol.0 (1738815) Lightsensor changed: hm-rpc.2.000D5BE9A467DE.1.CURRENT_ILLUMINATION Value: 4784 2023-09-11 09:38:59.883 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:39:15.381 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.000EDBE9A1B50F.1.ACTUAL_TEMPERATURE Value: 32.8 2023-09-11 09:39:17.384 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:39:17.793 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness sensor value: 7678 2023-09-11 09:39:17.805 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.00185BE9A574BC.1.ACTUAL_TEMPERATURE Value: 24.2 2023-09-11 09:39:17.808 - [34mdebug[39m: shuttercontrol.0 (1738815) Alarm Rain changed: false 2023-09-11 09:39:17.808 - [34mdebug[39m: shuttercontrol.0 (1738815) start shutterAlarm 2023-09-11 09:39:17.816 - [32minfo[39m: shuttercontrol.0 (1738815) Lightsensor #7 Will open ID: Dachfenster value: 1% after the window has been closed 2023-09-11 09:39:17.816 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger height: 1% 2023-09-11 09:39:17.816 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger action: up 2023-09-11 09:39:27.793 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness State Down is: false 2023-09-11 09:39:27.793 - [34mdebug[39m: shuttercontrol.0 (1738815) Lightsensor changed: hm-rpc.2.00185BE9A574BC.1.ILLUMINATION Value: 7678 2023-09-11 09:39:29.796 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:40:00.004 - [34mdebug[39m: shuttercontrol.0 (1738815) calculate astrodata ... 2023-09-11 09:40:00.005 - [34mdebug[39m: shuttercontrol.0 (1738815) Sun Azimut: 115.3° 2023-09-11 09:40:00.005 - [34mdebug[39m: shuttercontrol.0 (1738815) Sun Elevation: 26.3° 2023-09-11 09:40:02.053 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:41:23.125 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.000EDBE9A1B50F.1.ACTUAL_TEMPERATURE Value: 33.1 2023-09-11 09:41:25.128 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:41:32.752 - [34mdebug[39m: shuttercontrol.0 (1738815) Lightsensor changed: hm-rpc.2.000D5BE9A467DE.1.CURRENT_ILLUMINATION Value: 4788 2023-09-11 09:41:34.753 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:42:08.045 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness sensor value: 7683 2023-09-11 09:42:08.056 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.00185BE9A574BC.1.ACTUAL_TEMPERATURE Value: 24.4 2023-09-11 09:42:08.058 - [34mdebug[39m: shuttercontrol.0 (1738815) Alarm Rain changed: false 2023-09-11 09:42:08.058 - [34mdebug[39m: shuttercontrol.0 (1738815) start shutterAlarm 2023-09-11 09:42:08.060 - [32minfo[39m: shuttercontrol.0 (1738815) Lightsensor #7 Will open ID: Dachfenster value: 1% after the window has been closed 2023-09-11 09:42:08.061 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger height: 1% 2023-09-11 09:42:08.061 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger action: up 2023-09-11 09:42:10.057 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:42:18.046 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness State Down is: false 2023-09-11 09:42:18.046 - [34mdebug[39m: shuttercontrol.0 (1738815) Lightsensor changed: hm-rpc.2.00185BE9A574BC.1.ILLUMINATION Value: 7683 2023-09-11 09:42:20.048 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:44:20.633 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.000EDBE9A1B50F.1.ACTUAL_TEMPERATURE Value: 33.3 2023-09-11 09:44:22.635 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:44:43.800 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness sensor value: 7676 2023-09-11 09:44:43.810 - [34mdebug[39m: shuttercontrol.0 (1738815) outsidetemperature changed: hm-rpc.2.00185BE9A574BC.1.ACTUAL_TEMPERATURE Value: 24.5 2023-09-11 09:44:43.812 - [34mdebug[39m: shuttercontrol.0 (1738815) Alarm Rain changed: false 2023-09-11 09:44:43.812 - [34mdebug[39m: shuttercontrol.0 (1738815) start shutterAlarm 2023-09-11 09:44:43.815 - [32minfo[39m: shuttercontrol.0 (1738815) Lightsensor #7 Will open ID: Dachfenster value: 1% after the window has been closed 2023-09-11 09:44:43.816 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger height: 1% 2023-09-11 09:44:43.816 - [34mdebug[39m: shuttercontrol.0 (1738815) save new trigger action: up 2023-09-11 09:44:45.811 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:44:53.800 - [34mdebug[39m: shuttercontrol.0 (1738815) Brightness State Down is: false 2023-09-11 09:44:53.800 - [34mdebug[39m: shuttercontrol.0 (1738815) Lightsensor changed: hm-rpc.2.00185BE9A574BC.1.ILLUMINATION Value: 7676 2023-09-11 09:44:55.802 - [34mdebug[39m: shuttercontrol.0 (1738815) Heat Protection for Büro_Roll is active 2023-09-11 09:45:00.004 - [34mdebug[39m: shuttercontrol.0 (1738815) calculate astrodata ... 2023-09-11 09:45:00.004 - [34mdebug[39m: shuttercontrol.0 (1738815) Sun Azimut: 116.4°sentry: sieht aus wie ein Absturz. SQL-Adapter wird anschließend neu initialisiert. Passiert mehrfach.
2023-09-11 14:19:59.750 - [32minfo[39m: host.smarthome stopInstance system.adapter.shuttercontrol.0 (force=false, process=true) 2023-09-11 14:19:59.794 - [32minfo[39m: shuttercontrol.0 (2083) Got terminate signal TERMINATE_YOURSELF 2023-09-11 14:19:59.794 - [32minfo[39m: host.smarthome stopInstance system.adapter.shuttercontrol.0 send kill signal 2023-09-11 14:19:59.794 - [32minfo[39m: shuttercontrol.0 (2083) cleaned everything up... 2023-09-11 14:19:59.795 - [32minfo[39m: shuttercontrol.0 (2083) terminating 2023-09-11 14:19:59.796 - [32minfo[39m: shuttercontrol.0 (2083) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-11 14:20:00.335 - [32minfo[39m: host.smarthome instance system.adapter.shuttercontrol.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-11 14:20:02.831 - [32minfo[39m: host.smarthome instance system.adapter.shuttercontrol.0 started with pid 4528 2023-09-11 14:20:03.328 - [34mdebug[39m: shuttercontrol.0 (4528) Redis Objects: Use Redis connection: 127.0.0.1:9001 2023-09-11 14:20:03.358 - [34mdebug[39m: shuttercontrol.0 (4528) Objects client ready ... initialize now 2023-09-11 14:20:03.359 - [34mdebug[39m: shuttercontrol.0 (4528) Objects create System PubSub Client 2023-09-11 14:20:03.359 - [34mdebug[39m: shuttercontrol.0 (4528) Objects create User PubSub Client 2023-09-11 14:20:03.405 - [34mdebug[39m: shuttercontrol.0 (4528) Objects client initialize lua scripts 2023-09-11 14:20:03.407 - [34mdebug[39m: shuttercontrol.0 (4528) Objects connected to redis: 127.0.0.1:9001 2023-09-11 14:20:03.447 - [34mdebug[39m: shuttercontrol.0 (4528) Redis States: Use Redis connection: 127.0.0.1:9000 2023-09-11 14:20:03.469 - [34mdebug[39m: shuttercontrol.0 (4528) States create System PubSub Client 2023-09-11 14:20:03.470 - [34mdebug[39m: shuttercontrol.0 (4528) States create User PubSub Client 2023-09-11 14:20:03.491 - [34mdebug[39m: shuttercontrol.0 (4528) States connected to redis: 127.0.0.1:9000 2023-09-11 14:20:03.577 - [34mdebug[39m: shuttercontrol.0 (4528) Plugin sentry Do not initialize Plugin (enabled=false) 2023-09-11 14:20:03.620 - [34mdebug[39m: shuttercontrol.0 (4528) Plugin sentry destroyed because not initialized correctly 2023-09-11 14:20:03.686 - [32minfo[39m: sql.0 (1132) enabled logging of system.adapter.shuttercontrol.0.sigKill, Alias=false, WriteNulls=false 2023-09-11 14:20:03.693 - [32minfo[39m: sql.0 (1132) enabled logging of system.adapter.shuttercontrol.0.logLevel, Alias=false, WriteNulls=false 2023-09-11 14:20:03.773 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.upTimeSleep, Alias=false, WriteNulls=false 2023-09-11 14:20:03.773 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.upTimeLiving, Alias=false, WriteNulls=false 2023-09-11 14:20:03.773 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.downTimeSleep, Alias=false, WriteNulls=false 2023-09-11 14:20:03.773 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.downTimeLiving, Alias=false, WriteNulls=false 2023-09-11 14:20:03.773 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.Sunrise, Alias=false, WriteNulls=false 2023-09-11 14:20:03.773 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.Sunset, Alias=false, WriteNulls=false 2023-09-11 14:20:03.776 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.Elevation, Alias=false, WriteNulls=false 2023-09-11 14:20:03.778 - [32minfo[39m: sql.0 (1132) enabled logging of shuttercontrol.0.info.Azimut, Alias=false, WriteNulls=false 2023-09-11 14:20:03.780 - [32minfo[39m: shuttercontrol.0 (4528) starting. Version 1.6.1 in /opt/iobroker/node_modules/iobroker.shuttercontrol, node: v18.17.0, js-controller: 4.0.24 2023-09-11 14:20:03.797 - [34mdebug[39m: shuttercontrol.0 (4528) shutter Config Check started 2023-09-11 14:20:03.798 - [34mdebug[39m: shuttercontrol.0 (4528) shutter Config Check successfully completed 2023-09-11 14:20:03.800 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0A94A.1.STATE 2023-09-11 14:20:03.800 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0A93E.1.STATE 2023-09-11 14:20:03.801 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0A9B4.1.STATE 2023-09-11 14:20:03.801 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0BB59.1.STATE 2023-09-11 14:20:03.801 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0A952.1.STATE 2023-09-11 14:20:03.801 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.00155D8993D127.1.STATE 2023-09-11 14:20:03.802 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: klf200.0.products.0.targetPosition 2023-09-11 14:20:03.802 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.00155D8993CE0D.1.STATE 2023-09-11 14:20:03.802 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0A939.1.STATE 2023-09-11 14:20:03.802 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0AD76.1.STATE 2023-09-11 14:20:03.802 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0AD71.1.STATE 2023-09-11 14:20:03.802 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for shuttercontrol: hm-rpc.2.0000DBE9A0B99D.1.STATE 2023-09-11 14:20:03.803 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for inside temperature: hm-rpc.2.000A9D89921CB3.1.ACTUAL_TEMPERATURE 2023-09-11 14:20:03.803 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for inside temperature: hm-rpc.2.000A9D899221E3.1.ACTUAL_TEMPERATURE 2023-09-11 14:20:03.803 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for outside temperature: hm-rpc.2.000EDBE9A1B50F.1.ACTUAL_TEMPERATURE 2023-09-11 14:20:03.803 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for outside temperature: hm-rpc.2.00185BE9A574BC.1.ACTUAL_TEMPERATURE 2023-09-11 14:20:03.803 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for Light Sensor: hm-rpc.2.000BDD898AD676.1.ILLUMINATION 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for Light Sensor: hm-rpc.2.00185BE9A574BC.1.ILLUMINATION 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) trigger for Light Sensor: hm-rpc.2.000D5BE9A467DE.1.CURRENT_ILLUMINATION 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A36104.4.LEVEL 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A3609C.4.LEVEL 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A3610B.4.LEVEL 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A36113.4.LEVEL 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A36110.4.LEVEL 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A360FF.4.LEVEL 2023-09-11 14:20:03.804 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: klf200.0.products.1.targetPosition 2023-09-11 14:20:03.805 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A360A0.4.LEVEL 2023-09-11 14:20:03.805 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A3609F.4.LEVEL 2023-09-11 14:20:03.805 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A36124.4.LEVEL 2023-09-11 14:20:03.805 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A3611A.4.LEVEL 2023-09-11 14:20:03.805 - [34mdebug[39m: shuttercontrol.0 (4528) Shutter State: hm-rpc.2.00111BE9A3610D.4.LEVELQNAP 677 VM 16 ´GB, 4 Kerne, 3,4 GHz
17.258 Objekte
15.633 Zustände -
@unbeliveable89 Bitte poste mit deaktivierter Option den Debuglog, wenn du den Rollladen in den Manu Mode fährst
@simatec sagte in Test Adapter shuttercontrol v1.6.x:
@unbeliveable89 Bitte poste mit deaktivierter Option den Debuglog, wenn du den Rollladen in den Manu Mode fährst
Sorry, hat etwas gedauert. Das Problem besteht aber nach wie vor. Hier der Test mit dem "ez-lesefenster". Zum Start befand es sich im Sunprotect Mode (75), dann manuell auf Value 56 gefahren. Kurz danach fährt er komplett hoch (hier ist bei diesem Rollladen 25 eingestellt, nicht 0) und dann direkt wieder in den Sunprotect Mode. Das ist seit v1.6.x
2023-09-17 12:29:37.400 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 56. Old value = 75. New value = 56 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 shutterState: 56 % 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 oldHeight: 75 % 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:29:37.582 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 56. Old value = 75. New value = 56 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) #1 shutterState: 56 % 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 oldHeight: 75 % 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:29:38.737 - debug: shuttercontrol.0 (425866) Lightsensor up wz-ost already up at: 0% - setting current action: up 2023-09-17 12:29:38.756 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 56. Old value = 75. New value = 56 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 shutterState: 56 % 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 oldHeight: 75 % 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:29:40.410 - debug: shuttercontrol.0 (425866) save current height after State Check: 56% from ez-lesefenster-sued 2023-09-17 12:29:40.410 - debug: shuttercontrol.0 (425866) Shutter ez-lesefenster-sued was moved manually to: 56% - prevent trigger from driving back 2023-09-17 12:29:42.529 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:29:42.531 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:42.531 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Old value = 75. New value = 56. automatic is active 2023-09-17 12:29:49.742 - debug: shuttercontrol.0 (425866) Lightsensor up ez-terrasse-ost already up at: 0% - setting current action: up 2023-09-17 12:30:00.007 - debug: shuttercontrol.0 (425866) calculate astrodata ... 2023-09-17 12:30:00.007 - debug: shuttercontrol.0 (425866) Sun Azimut: 164.1° 2023-09-17 12:30:00.007 - debug: shuttercontrol.0 (425866) Sun Elevation: 42.2° 2023-09-17 12:30:00.041 - info: host.iobroker instance system.adapter.netatmo-crawler.0 started with pid 425881 2023-09-17 12:30:00.626 - info: netatmo-crawler.0 (425881) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.17.1, js-controller: 4.0.24 2023-09-17 12:30:00.645 - info: netatmo-crawler.0 (425881) Getting data for stationid:70:ee:50:52:c5:fe 2023-09-17 12:30:00.749 - debug: shuttercontrol.0 (425866) Lightsensor up ez-terrasse-sued already up at: 0% - setting current action: sunProtect 2023-09-17 12:30:01.163 - info: netatmo-crawler.0 (425881) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-09-17 12:30:01.681 - info: host.iobroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-17 12:30:10.751 - info: shuttercontrol.0 (425866) Lightsensor #6 Set ID: ez-lesefenster-sued value: 25% 2023-09-17 12:30:10.754 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:10.759 - debug: shuttercontrol.0 (425866) last automatic Action for ez-lesefenster-sued: up_Brightness 2023-09-17 12:30:10.759 - debug: shuttercontrol.0 (425866) save current height: 25% from ez-lesefenster-sued 2023-09-17 12:30:11.007 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:11.531 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:11.663 - debug: shuttercontrol.0 (425866) Lightsensor changed: hmip.0.devices.3014F711A0000D5D89B9F1BB.channels.1.averageIllumination Value: 12323 2023-09-17 12:30:18.817 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:20.763 - debug: shuttercontrol.0 (425866) Lightsensor up kueche-sued already up at: 0% - setting current action: sunProtect 2023-09-17 12:30:30.767 - debug: shuttercontrol.0 (425866) Lightsensor up spk-west already up at: 0% - setting current action: up 2023-09-17 12:30:32.024 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued: Check basis for sunprotect. Height:25 > HeightDownSun: 75 AND Height:25 == currentHeight:25 AND currentHeight:25 == heightUp:25 2023-09-17 12:30:32.025 - info: shuttercontrol.0 (425866) Sunprotect #412 Set ID: ez-lesefenster-sued value: 75% 2023-09-17 12:30:32.027 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Sunprotect for ez-lesefenster-sued is active 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Temperature inside: 23.7 > 22 AND ( Temperatur outside: 28.6 > 20 AND Light: 83130 > 20000 ) 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Sunprotect ez-lesefenster-sued old height: 25% new height: 75% 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) last automatic Action for ez-lesefenster-sued: down_Sunprotect 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Sunprotect ez-lesefenster-sued old height: 25% new height: 75% 2023-09-17 12:30:32.263 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:33.382 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:40.772 - debug: shuttercontrol.0 (425866) Lightsensor up gaestebad-west already up at: 0% - setting current action: up 2023-09-17 12:30:41.755 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 30 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 30. Old value = 25. New value = 30 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 shutterState: 30 % 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 oldHeight: 25 % 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:30:42.008 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 30 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 30. Old value = 25. New value = 30 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 shutterState: 30 % 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 oldHeight: 25 % 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:30:42.532 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:42.533 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 30 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 30. Old value = 25. New value = 30 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 shutterState: 30 % 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 oldHeight: 25 % 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:30:43.061 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:49.818 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:49.820 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:30:50.776 - debug: shuttercontrol.0 (425866) Lightsensor up gaestebad-nord already up at: 0% - setting current action: up 2023-09-17 12:31:00.780 - debug: shuttercontrol.0 (425866) Lightsensor up buero-sued already up at: 0% - setting current action: sunProtect 2023-09-17 12:31:03.028 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:03.029 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:31:03.264 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:03.266 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:31:04.383 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:04.384 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:31:14.062 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:14.063 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 -
@simatec sagte in Test Adapter shuttercontrol v1.6.x:
@unbeliveable89 Bitte poste mit deaktivierter Option den Debuglog, wenn du den Rollladen in den Manu Mode fährst
Sorry, hat etwas gedauert. Das Problem besteht aber nach wie vor. Hier der Test mit dem "ez-lesefenster". Zum Start befand es sich im Sunprotect Mode (75), dann manuell auf Value 56 gefahren. Kurz danach fährt er komplett hoch (hier ist bei diesem Rollladen 25 eingestellt, nicht 0) und dann direkt wieder in den Sunprotect Mode. Das ist seit v1.6.x
2023-09-17 12:29:37.400 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 56. Old value = 75. New value = 56 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 shutterState: 56 % 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 oldHeight: 75 % 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:29:37.401 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:29:37.582 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 56. Old value = 75. New value = 56 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:29:37.584 - debug: shuttercontrol.0 (425866) #1 shutterState: 56 % 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 oldHeight: 75 % 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:29:37.585 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:29:38.737 - debug: shuttercontrol.0 (425866) Lightsensor up wz-ost already up at: 0% - setting current action: up 2023-09-17 12:29:38.756 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 56. Old value = 75. New value = 56 2023-09-17 12:29:38.758 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 shutterState: 56 % 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 oldHeight: 75 % 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:29:38.759 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:29:40.410 - debug: shuttercontrol.0 (425866) save current height after State Check: 56% from ez-lesefenster-sued 2023-09-17 12:29:40.410 - debug: shuttercontrol.0 (425866) Shutter ez-lesefenster-sued was moved manually to: 56% - prevent trigger from driving back 2023-09-17 12:29:42.529 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:29:42.531 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 75 new value = 56 2023-09-17 12:29:42.531 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Old value = 75. New value = 56. automatic is active 2023-09-17 12:29:49.742 - debug: shuttercontrol.0 (425866) Lightsensor up ez-terrasse-ost already up at: 0% - setting current action: up 2023-09-17 12:30:00.007 - debug: shuttercontrol.0 (425866) calculate astrodata ... 2023-09-17 12:30:00.007 - debug: shuttercontrol.0 (425866) Sun Azimut: 164.1° 2023-09-17 12:30:00.007 - debug: shuttercontrol.0 (425866) Sun Elevation: 42.2° 2023-09-17 12:30:00.041 - info: host.iobroker instance system.adapter.netatmo-crawler.0 started with pid 425881 2023-09-17 12:30:00.626 - info: netatmo-crawler.0 (425881) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.17.1, js-controller: 4.0.24 2023-09-17 12:30:00.645 - info: netatmo-crawler.0 (425881) Getting data for stationid:70:ee:50:52:c5:fe 2023-09-17 12:30:00.749 - debug: shuttercontrol.0 (425866) Lightsensor up ez-terrasse-sued already up at: 0% - setting current action: sunProtect 2023-09-17 12:30:01.163 - info: netatmo-crawler.0 (425881) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-09-17 12:30:01.681 - info: host.iobroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-17 12:30:10.751 - info: shuttercontrol.0 (425866) Lightsensor #6 Set ID: ez-lesefenster-sued value: 25% 2023-09-17 12:30:10.754 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:10.759 - debug: shuttercontrol.0 (425866) last automatic Action for ez-lesefenster-sued: up_Brightness 2023-09-17 12:30:10.759 - debug: shuttercontrol.0 (425866) save current height: 25% from ez-lesefenster-sued 2023-09-17 12:30:11.007 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:11.531 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:11.663 - debug: shuttercontrol.0 (425866) Lightsensor changed: hmip.0.devices.3014F711A0000D5D89B9F1BB.channels.1.averageIllumination Value: 12323 2023-09-17 12:30:18.817 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:20.763 - debug: shuttercontrol.0 (425866) Lightsensor up kueche-sued already up at: 0% - setting current action: sunProtect 2023-09-17 12:30:30.767 - debug: shuttercontrol.0 (425866) Lightsensor up spk-west already up at: 0% - setting current action: up 2023-09-17 12:30:32.024 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued: Check basis for sunprotect. Height:25 > HeightDownSun: 75 AND Height:25 == currentHeight:25 AND currentHeight:25 == heightUp:25 2023-09-17 12:30:32.025 - info: shuttercontrol.0 (425866) Sunprotect #412 Set ID: ez-lesefenster-sued value: 75% 2023-09-17 12:30:32.027 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Sunprotect for ez-lesefenster-sued is active 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Temperature inside: 23.7 > 22 AND ( Temperatur outside: 28.6 > 20 AND Light: 83130 > 20000 ) 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Sunprotect ez-lesefenster-sued old height: 25% new height: 75% 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) last automatic Action for ez-lesefenster-sued: down_Sunprotect 2023-09-17 12:30:32.032 - debug: shuttercontrol.0 (425866) Sunprotect ez-lesefenster-sued old height: 25% new height: 75% 2023-09-17 12:30:32.263 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:33.382 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:40.772 - debug: shuttercontrol.0 (425866) Lightsensor up gaestebad-west already up at: 0% - setting current action: up 2023-09-17 12:30:41.755 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 30 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 30. Old value = 25. New value = 30 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 shutterState: 30 % 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 oldHeight: 25 % 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:30:41.757 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:30:42.008 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 30 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 30. Old value = 25. New value = 30 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 shutterState: 30 % 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 oldHeight: 25 % 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:30:42.010 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:30:42.532 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:42.533 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 30 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) set Manu_Mode #1 ez-lesefenster-sued 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued drived manually to 30. Old value = 25. New value = 30 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) ez-lesefenster-sued Updated trigger action to Manu_Mode to prevent moving after window close 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 shutterName: ez-lesefenster-sued 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 shutterState: 30 % 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentAction: Manu_Mode 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 triggerAction: Manu_Mode 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentHeight: 75 % 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 oldHeight: 25 % 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentShutterState: activated 2023-09-17 12:30:42.534 - debug: shuttercontrol.0 (425866) #1 currentShutterStateTime: 31 seconds 2023-09-17 12:30:43.061 - debug: shuttercontrol.0 (425866) #0 wait for shutter check started 2023-09-17 12:30:49.818 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:30:49.820 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:30:50.776 - debug: shuttercontrol.0 (425866) Lightsensor up gaestebad-nord already up at: 0% - setting current action: up 2023-09-17 12:31:00.780 - debug: shuttercontrol.0 (425866) Lightsensor up buero-sued already up at: 0% - setting current action: sunProtect 2023-09-17 12:31:03.028 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:03.029 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:31:03.264 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:03.266 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:31:04.383 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:04.384 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75 2023-09-17 12:31:14.062 - debug: shuttercontrol.0 (425866) #0 wait for shutter check end 2023-09-17 12:31:14.063 - debug: shuttercontrol.0 (425866) Shutter state changed: ez-lesefenster-sued old value = 25 new value = 75@unbeliveable89 Bei mir ähnliche Probleme. Erst 1.6.2 drauf, jetzt zurück auf 1.6.1, gleiches Problem. Es wird der Sonnenschutz nicht richtig geprüft.
Die States openAll etc. waren früher auch Buttons, jetzt sind das true/false Einträge - ist das so richtig?
-
@unbeliveable89 Bei mir ähnliche Probleme. Erst 1.6.2 drauf, jetzt zurück auf 1.6.1, gleiches Problem. Es wird der Sonnenschutz nicht richtig geprüft.
Die States openAll etc. waren früher auch Buttons, jetzt sind das true/false Einträge - ist das so richtig?
@guitardoc
eventuell gleiches Problem wie hier?
https://forum.iobroker.net/topic/22405/test-adapter-shuttercontrol-v1-6-x/6356?_=1694940263292
Support us
407
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge