iobroker kaum benutzbar - redis 100%
-
@wal Habe ich und natürlich nichts gefunden... Deshalb frage ich ja.
-
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
@wal Habe ich und natürlich nichts gefunden... Deshalb frage ich ja.
https://forum.iobroker.net/search?term=npip%3A Permission denied&in=titlesposts
-
@wal
Das habe ich auch so gefunden, aber: Was ist die Lösung? Esphome brauche ich gar nicht und ist eigentlich auch nicht aktiv. -
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
Esphome brauche ich gar nicht und ist eigentlich auch nicht aktiv.
Dann schmeiß es raus. Wenn du es beheben willst:
nopyist das Stichwort für die Suche. -
@thomas-braun Das mit dem rausschmeißen habe ich auch versucht. Geht aber nicht. Was muss ich denn löschen, damit er es nicht mehr mit neu bauen will?
npm i nopy habe ich auch gemacht. Dann ist der Admin irgendwann aufrufbar wärend des Prozesses, aber der läuft dann auf einen Fehler (eben den oben genannten mit esphome) und dann war es das dann wieder.
ein iob fix in sagt dann eben ist nicht installiert...npm -v aktuell = 9.6.7
node -v = v18.17.1 -
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
npm i nopy habe ich auch gemacht. Dann ist der Admin irgendwann aufrufbar wärend des Prozesses, aber der läuft dann auf einen Fehler (eben den oben genannten mit esphome) und dann war es das dann wieder.
ein iob fix in sagt dann eben ist nicht installiert...Damit kann ich nix anfangen.
Hier:
https://forum.iobroker.net/topic/67980/esphome-dashboard-geht-nicht
hat es jedenfalls funktioniert. -
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
npm i nopy habe ich auch gemacht.
aber nicht gezeigt!
wo hast du es ausgeführt?
mit welchem user? -
@homoran Nach einem Reboor klappte es nun mit npm i nopy.
Jetzt ist alles aktuell - das alte Problem mit dem Redis aber noch da.
Fast alle Adapter stehen auch nur noch auf Errorlog. Trozdem keine Veränderung.[H[2J[3J [34;107m*** ioBroker Diagnosis ***[0m Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue [H[2J[3J [34;107m*** ioBroker Diagnosis ***[0m Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue [H[2J[3J [33m======== Start marking the full check here =========[0mSkript v.2023-04-16 [34;107m*** BASE SYSTEM ***[0m Architecture : x86_64 Docker : false Virtualization : lxc Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 13:04:39 up 1:18, 1 user, load average: 6.87, 7.29, 6.93 CPU threads: 4 [34;107m*** Time and Time Zones ***[0m Local time: Fri 2023-09-01 13:04:39 CEST Universal time: Fri 2023-09-01 11:04:39 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no [34;107m*** User and Groups ***[0m iobroker /home/iobroker iobroker tty dialout audio video ssh redis [34;107m*** X-Server-Setup ***[0m X-Server: false Desktop: Terminal: tty Boot Target: graphical.target [34;107m*** MEMORY ***[0m total used free shared buff/cache available Mem: 12G 5.0G 5.2G 0.0K 1.8G 7.0G Swap: 7.2G 657M 6.5G Total: 19G 5.6G 11G 12000 M total memory 4951 M used memory 796 M active memory 5633 M inactive memory 5228 M free memory 0 M buffer memory 1819 M swap cache 7167 M total swap 657 M used swap 6510 M free swap [34;107m*** FILESYSTEM ***[0m Filesystem Type Size Used Avail Use% Mounted on /dev/loop0 ext4 63G 19G 41G 32% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 7.8G 0 7.8G 0% /dev/fuse tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.2G 184K 3.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock //192.168.0.89/video cifs 14T 7.4T 5.8T 56% /mnt/filme //192.168.0.89/VU cifs 14T 7.4T 5.8T 56% /mnt/vu //192.168.0.89/Backup cifs 14T 7.4T 5.8T 56% /mnt/backup //192.168.0.89/docker/paperless/data/consume cifs 14T 7.4T 5.8T 56% /mnt/dms_input //192.168.0.89/homes cifs 14T 7.4T 5.8T 56% /mnt/homes //192.168.0.89/Kram cifs 14T 7.4T 5.8T 56% /mnt/Kram tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1001 //192.168.0.89/Backup/iobroker cifs 14T 7.4T 5.8T 56% /opt/iobroker/backups [32mMessages concerning ext4 filesystem in dmesg:[0m [Thu Aug 10 13:41:28 2023] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Aug 10 13:41:29 2023] EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro. Quota mode: none. [Thu Aug 10 13:41:40 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Aug 10 13:41:43 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Mon Aug 21 14:07:03 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 08:20:42 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 11:42:04 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 11:45:58 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [32mShow mounted filesystems (real ones only):[0m TARGET SOURCE FSTYPE OPTIONS / /dev/loop0 ext4 rw,relatime |-/mnt/filme //192.168.0.89/video cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/vu //192.168.0.89/VU cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/backup //192.168.0.89/Backup cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/dms_input //192.168.0.89/docker/paperless/data/consume cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/homes //192.168.0.89/homes cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/Kram //192.168.0.89/Kram cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 `-/opt/iobroker/backups //192.168.0.89/Backup/iobroker cifs rw,relatime,vers=2.0,cache=strict,username=heckmic,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.0.89,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=65536,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1 [32mFiles in neuralgic directories:[0m [32m/var:[0m 5.8G /var/ 3.7G /var/log/journal/c01d62f951a24586b96d69a8f9b64825 3.7G /var/log/journal 3.7G /var/log 1.6G /var/lib Archived and active journals take up 2.9G in the file system. [32m/opt/iobroker/backups:[0m 6.0G /opt/iobroker/backups/ 8.8M /opt/iobroker/backups/vis 6.2M /opt/iobroker/backups/vis/MeinHaus 2.5M /opt/iobroker/backups/vis/main 752K /opt/iobroker/backups/vis/main/img/Hintergrund [32m/opt/iobroker/iobroker-data:[0m 55M /opt/iobroker/iobroker-data/ 16M /opt/iobroker/iobroker-data/files 11M /opt/iobroker/iobroker-data/files/vis.0 6.3M /opt/iobroker/iobroker-data/files/vis.0/MeinHaus 4.6M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo [32mThe five largest files in iobroker-data are:[0m 33M /opt/iobroker/iobroker-data/objects.jsonl 6.4M /opt/iobroker/iobroker-data/states.jsonl 1.7M /opt/iobroker/iobroker-data/files/vis.0/main/vis-views.json 1.3M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo/green.jpg 840K /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo/bakestone.jpg [34;107m*** NodeJS-Installation ***[0m /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org bullseye-security/main amd64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://ftp.debian.org/debian bullseye/main amd64 Packages [32mTemp directories causing npm8 problem:[0m 1 Some problems detected, please run [031miob fix[0m [34;107m*** ioBroker-Installation ***[0m [32mioBroker Status[0m No connection to objects 192.168.0.160:6379[redis] MULTIHOSTSERVICE/enabled: false [32mCore adapters versions[0m js-controller: 5.0.12 admin: 6.9.1 javascript: 7.1.4 Adapters from github: 5 [32mAdapter State[0m system.adapter.adguard.0 : adguard : SmarthomeVM - disabled + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : SmarthomeVM - enabled + system.adapter.backitup.0 : backitup : SmarthomeVM - enabled + system.adapter.bring.0 : bring : SmarthomeVM - enabled system.adapter.chromecast.0 : chromecast : SmarthomeVM - enabled system.adapter.daswetter.0 : daswetter : SmarthomeVM - enabled + system.adapter.denon.0 : denon : SmarthomeVM - enabled system.adapter.devices.0 : devices : SmarthomeVM - disabled + system.adapter.discovery.0 : discovery : SmarthomeVM - enabled system.adapter.dwd.0 : dwd : SmarthomeVM - enabled + system.adapter.energiefluss.0 : energiefluss : SmarthomeVM - enabled + system.adapter.energiefluss.1 : energiefluss : SmarthomeVM - enabled + system.adapter.enigma2.0 : enigma2 : SmarthomeVM - enabled + system.adapter.enigma2.1 : enigma2 : SmarthomeVM - enabled + system.adapter.fhem.0 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.1 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.2 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.3 : fhem : SmarthomeVM - enabled, port: 7072 system.adapter.flot.0 : flot : SmarthomeVM - disabled + system.adapter.fritzdect.0 : fritzdect : SmarthomeVM - enabled + system.adapter.fullcalendar.0 : fullcalendar : SmarthomeVM - enabled + system.adapter.go-e.0 : go-e : SmarthomeVM - enabled + system.adapter.ham.0 : ham : SmarthomeVM - enabled + system.adapter.harmony.0 : harmony : SmarthomeVM - enabled system.adapter.ical.0 : ical : SmarthomeVM - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: SmarthomeVM - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : SmarthomeVM - disabled system.adapter.icons-icons8.0 : icons-icons8 : SmarthomeVM - disabled system.adapter.icons-material-png.0 : icons-material-png : SmarthomeVM - disabled system.adapter.icons-material-svg.0 : icons-material-svg : SmarthomeVM - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : SmarthomeVM - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : SmarthomeVM - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: SmarthomeVM - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : SmarthomeVM - disabled + system.adapter.info.0 : info : SmarthomeVM - enabled + system.adapter.iot.0 : iot : SmarthomeVM - enabled + system.adapter.javascript.0 : javascript : SmarthomeVM - enabled system.adapter.kodi.0 : kodi : SmarthomeVM - disabled, port: 9090 system.adapter.lgtv.0 : lgtv : SmarthomeVM - disabled system.adapter.midea.0 : midea : SmarthomeVM - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : SmarthomeVM - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : SmarthomeVM - enabled, port: 54321, bind: 0.0.0.0 system.adapter.mihome-vacuum.1 : mihome-vacuum : SmarthomeVM - disabled, port: 54321 + system.adapter.mihome.0 : mihome : SmarthomeVM - enabled, port: 9898, bind: 192.168.0.160 system.adapter.mobile.0 : mobile : SmarthomeVM - disabled + system.adapter.mqtt.0 : mqtt : SmarthomeVM - enabled, port: 1889, bind: 192.168.0.160 + system.adapter.mqtt.1 : mqtt : solaranzeige - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : SmarthomeVM - enabled + system.adapter.nina.0 : nina : SmarthomeVM - enabled + system.adapter.nuki.0 : nuki : SmarthomeVM - enabled system.adapter.openweathermap.0 : openweathermap : SmarthomeVM - enabled + system.adapter.ping.0 : ping : SmarthomeVM - enabled + system.adapter.proxmox.0 : proxmox : SmarthomeVM - enabled, port: 8006 + system.adapter.pvforecast.0 : pvforecast : SmarthomeVM - enabled + system.adapter.pvoutputorg.0 : pvoutputorg : SmarthomeVM - enabled + system.adapter.renault.0 : renault : SmarthomeVM - enabled + system.adapter.sainlogic.0 : sainlogic : SmarthomeVM - enabled, port: 45000, bind: 192.168.0.160 + system.adapter.scenes.0 : scenes : SmarthomeVM - enabled + system.adapter.scheduler.0 : scheduler : SmarthomeVM - enabled system.adapter.schoolfree.0 : schoolfree : SmarthomeVM - enabled + system.adapter.shelly.0 : shelly : SmarthomeVM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : SmarthomeVM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : SmarthomeVM - enabled, port: 1883, bind: 192.168.0.160 + system.adapter.sql.0 : sql : SmarthomeVM - enabled, port: 3306 + system.adapter.synology.0 : synology : SmarthomeVM - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : SmarthomeVM - enabled + system.adapter.telegram.0 : telegram : SmarthomeVM - enabled, port: 8443, bind: 0.0.0.0 system.adapter.telegram.1 : telegram : SmarthomeVM - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : SmarthomeVM - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.tesla-motors.0 : tesla-motors : SmarthomeVM - enabled + system.adapter.text2command.0 : text2command : SmarthomeVM - enabled + system.adapter.tr-064.0 : tr-064 : SmarthomeVM - enabled system.adapter.tuya.0 : tuya : SmarthomeVM - disabled + system.adapter.unifi.0 : unifi : SmarthomeVM - enabled + system.adapter.upnp.0 : upnp : SmarthomeVM - enabled + system.adapter.vedirect.0 : vedirect : solaranzeige - enabled system.adapter.vis-2-beta.0 : vis-2-beta : SmarthomeVM - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : SmarthomeVM - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: SmarthomeVM - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : SmarthomeVM - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : SmarthomeVM - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : SmarthomeVM - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : SmarthomeVM - disabled system.adapter.vis-justgage.0 : vis-justgage : SmarthomeVM - disabled system.adapter.vis-lcars.0 : vis-lcars : SmarthomeVM - disabled system.adapter.vis-map.0 : vis-map : SmarthomeVM - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : SmarthomeVM - disabled system.adapter.vis-metro.0 : vis-metro : SmarthomeVM - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : SmarthomeVM - disabled system.adapter.vis-weather.0 : vis-weather : SmarthomeVM - disabled system.adapter.vis.0 : vis : SmarthomeVM - enabled system.adapter.weatherunderground.0 : weatherunderground : SmarthomeVM - enabled + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : SmarthomeVM - enabled system.adapter.windows-control.0 : windows-control : SmarthomeVM - disabled + system.adapter.wolf.0 : wolf : SmarthomeVM - enabled, port: 12004, bind: 192.168.0.160 + system.adapter.worx.0 : worx : SmarthomeVM - enabled + system.adapter.ws.0 : ws : SmarthomeVM - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.xbox.0 : xbox : SmarthomeVM - disabled + system.adapter.yahka.0 : yahka : SmarthomeVM - enabled system.adapter.yeelight-2.0 : yeelight-2 : SmarthomeVM - enabled + system.adapter.zigbee.0 : zigbee : SmarthomeVM - enabled, port: /dev/ttyUSB0 + instance is alive [32mEnabled adapters with bindings[0m + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.fhem.0 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.1 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.2 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.3 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.mihome-vacuum.0 : mihome-vacuum : SmarthomeVM - enabled, port: 54321, bind: 0.0.0.0 + system.adapter.mihome.0 : mihome : SmarthomeVM - enabled, port: 9898, bind: 192.168.0.160 + system.adapter.mqtt.0 : mqtt : SmarthomeVM - enabled, port: 1889, bind: 192.168.0.160 + system.adapter.mqtt.1 : mqtt : solaranzeige - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : SmarthomeVM - enabled, port: 8006 + system.adapter.sainlogic.0 : sainlogic : SmarthomeVM - enabled, port: 45000, bind: 192.168.0.160 + system.adapter.shelly.0 : shelly : SmarthomeVM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : SmarthomeVM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : SmarthomeVM - enabled, port: 1883, bind: 192.168.0.160 + system.adapter.sql.0 : sql : SmarthomeVM - enabled, port: 3306 + system.adapter.synology.0 : synology : SmarthomeVM - enabled, port: 5000 + system.adapter.telegram.0 : telegram : SmarthomeVM - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : SmarthomeVM - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin + system.adapter.wolf.0 : wolf : SmarthomeVM - enabled, port: 12004, bind: 192.168.0.160 + system.adapter.ws.0 : ws : SmarthomeVM - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : SmarthomeVM - enabled, port: /dev/ttyUSB0 [32mioBroker-Repositories[0m Beta (latest) : http://download.iobroker.net/sources-dist.json stable : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable [32mInstalled ioBroker-Instances[0m Used repository: stable Adapter "adguard" : 0.0.8 , installed 0.0.8 Adapter "admin" : 6.9.1 , installed 6.9.1 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "backitup" : 2.7.0 , installed 2.7.0 Adapter "bring" : 1.8.1 , installed 1.8.1 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.2.0 , installed 3.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "enigma2" : 2.0.2 , installed 2.0.2 Adapter "esphome" : 0.2.4 , installed 0.2.4 Adapter "fhem" : 2.0.5 , installed 2.0.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullcalendar" : 2.2.6 , installed 2.2.6 Adapter "go-e" : 1.0.27 , installed 1.0.27 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 2.0.9 , installed 2.0.9 Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openweathermap": 0.4.2 , installed 0.4.2 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 1.3.5 , installed 1.3.5 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "pvoutputorg" : 1.8.9 , installed 1.8.9 Adapter "renault" : 0.0.21 , installed 0.0.21 Adapter "sainlogic" : 0.10.5 , installed 0.10.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "scheduler" : 1.1.9 , installed 1.1.9 Adapter "schoolfree" : 1.1.1 , installed 1.1.1 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.7 , installed 2.5.7 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vedirect" : 0.3.0 , installed 0.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.3.0, installed 0.3.0 Adapter "vis-2-widgets-jaeger-design": 1.0.0, installed 1.0.0 Adapter "vis-2-widgets-material": 1.0.0, installed 1.0.0 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.3, installed 3.4.3 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wolf" : 1.7.0 , installed 1.7.0 Adapter "worx" : 2.3.2 , installed 2.3.2 Adapter "ws" : 2.5.3 , installed 2.5.3 Adapter "xbox" : 1.0.2 , installed 1.0.2 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "yeelight-2" : 1.2.1 , installed 1.2.1 Adapter "zigbee" : 1.8.23 , installed 1.8.23 [32mObjects and States[0m Please stand by - This may take a while Objects: 224862 States: 170114 [34;107m*** OS-Repositories and Updates ***[0m Hit:1 http://security.debian.org bullseye-security InRelease Hit:2 http://ftp.debian.org/debian bullseye InRelease Hit:3 http://ftp.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 [34;107m*** Listening Ports ***[0m Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:33965 0.0.0.0:* LISTEN 0 213136649 211/rpc.mountd tcp 0 0 0.0.0.0:34099 0.0.0.0:* LISTEN 0 213135008 - tcp 0 0 192.168.0.160:1883 0.0.0.0:* LISTEN 1001 213177430 3884/io.sonoff.0 tcp 0 0 192.168.0.160:1890 0.0.0.0:* LISTEN 1001 213485766 68123/io.mqtt.0 tcp 0 0 192.168.0.160:1889 0.0.0.0:* LISTEN 1001 213485765 68123/io.mqtt.0 tcp 0 0 127.0.0.1:33275 0.0.0.0:* LISTEN 1001 213198887 5603/io.yahka.0 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 104 213135940 157/systemd-resolve tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 213134111 1/init tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 213149422 2124/master tcp 0 0 0.0.0.0:36395 0.0.0.0:* LISTEN 0 213136661 211/rpc.mountd tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 110 213137479 265/mariadbd tcp 0 0 192.168.0.160:45000 0.0.0.0:* LISTEN 1001 213180762 4101/io.sainlogic.0 tcp 0 0 192.168.0.160:12004 0.0.0.0:* LISTEN 1001 213176337 3765/io.wolf.0 tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN 0 213135966 - tcp 0 0 0.0.0.0:46657 0.0.0.0:* LISTEN 1001 213190075 5603/io.yahka.0 tcp 0 0 0.0.0.0:46873 0.0.0.0:* LISTEN 0 213136673 211/rpc.mountd tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 104 213135934 157/systemd-resolve tcp 0 0 0.0.0.0:8084 0.0.0.0:* LISTEN 998 213150307 2215/perl tcp 0 0 0.0.0.0:8085 0.0.0.0:* LISTEN 998 213150308 2215/perl tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 998 213150306 2215/perl tcp 0 0 192.168.0.160:6379 0.0.0.0:* LISTEN 109 213541673 81725/redis-server tcp 0 0 192.168.0.160:8082 0.0.0.0:* LISTEN 1001 213186243 4697/io.web.0 tcp 0 0 0.0.0.0:7072 0.0.0.0:* LISTEN 998 213151890 2215/perl tcp6 0 0 :::34457 :::* LISTEN 0 213135982 - tcp6 0 0 ::1:6379 :::* LISTEN 109 213541674 81725/redis-server tcp6 0 0 :::80 :::* LISTEN 0 213151075 2156/apache2 tcp6 0 0 :::111 :::* LISTEN 0 213136394 1/init tcp6 0 0 :::22 :::* LISTEN 0 213135903 1/init tcp6 0 0 :::52417 :::* LISTEN 0 213136667 211/rpc.mountd tcp6 0 0 :::2049 :::* LISTEN 0 213135973 - tcp6 0 0 :::5355 :::* LISTEN 104 213135937 157/systemd-resolve tcp6 0 0 :::37563 :::* LISTEN 0 213136679 211/rpc.mountd tcp6 0 0 :::61991 :::* LISTEN 1001 213181724 4241/io.harmony.0 tcp6 0 0 :::37757 :::* LISTEN 0 213136655 211/rpc.mountd tcp6 0 0 :::8088 :::* LISTEN 1001 213192646 6820/io.ws.0 tcp6 0 0 :::8089 :::* LISTEN 1001 213186350 4926/io.terminal.0 tcp6 0 0 :::8087 :::* LISTEN 1001 213316775 33376/io.simple-api tcp6 0 0 :::8081 :::* LISTEN 1001 213559664 83132/io.admin.0 tcp6 0 0 :::8000 :::* LISTEN 1001 213559744 83010/io.upnp.0 tcp6 0 0 ::1:25 :::* LISTEN 0 213149423 2124/master udp 0 0 0.0.0.0:2049 0.0.0.0:* 0 213136686 - udp 0 0 0.0.0.0:51426 0.0.0.0:* 0 213135007 - udp 0 0 0.0.0.0:52404 0.0.0.0:* 1001 213549428 83010/io.upnp.0 udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 213301600 29585/io.mihome-vac udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 213181725 4241/io.harmony.0 udp 0 0 192.168.0.160:5353 0.0.0.0:* 1001 213327960 35089/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 213190072 5603/io.yahka.0 udp 0 0 0.0.0.0:5355 0.0.0.0:* 104 213135933 157/systemd-resolve udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 213176354 3783/io.shelly.0 udp 0 0 0.0.0.0:55457 0.0.0.0:* 0 213136658 211/rpc.mountd udp 0 0 127.0.0.53:53 0.0.0.0:* 104 213135939 157/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 213135815 1/init udp 0 0 0.0.0.0:57623 0.0.0.0:* 0 213136646 211/rpc.mountd udp 0 0 0.0.0.0:41969 0.0.0.0:* 0 213136670 211/rpc.mountd udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 213299115 30131/io.mihome.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 213552686 83010/io.upnp.0 udp6 0 0 :::2049 :::* 0 213135974 - udp6 0 0 :::5355 :::* 104 213135936 157/systemd-resolve udp6 0 0 :::54956 :::* 0 213135981 - udp6 0 0 :::55128 :::* 0 213136676 211/rpc.mountd udp6 0 0 :::40961 :::* 0 213136652 211/rpc.mountd udp6 0 0 :::111 :::* 0 213134777 1/init udp6 0 0 :::57937 :::* 0 213136664 211/rpc.mountd [34;107m*** Log File - Last 25 Lines ***[0m 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Vorherage: 59 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_WInd0 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_Regen0 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_zu_dunkel: true 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_zu_dunkel_MIttelwert11817 2023-09-01 13:06:00.036 - [32minfo[39m: javascript.0 (3684) script.js.go-e.Leistungsregelung_Solarinsel: Go-e an Insel 2023-09-01 13:06:00.036 - [32minfo[39m: javascript.0 (3684) script.js.go-e.Leistungsregelung_Solarinsel: Ladeleistung: -145 2023-09-01 13:06:00.036 - [32minfo[39m: javascript.0 (3684) script.js.go-e.Leistungsregelung_Solarinsel: Gesamtleistung: 758 2023-09-01 13:06:00.042 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.Bilderrahmen_view_wechsel: 8 2023-09-01 13:06:00.042 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.Bilderrahmen_view_wechsel: Energiefluss 2023-09-01 13:06:02.974 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-01 13:06:03.129 - [31merror[39m: go-e.0 (11175) connect EHOSTUNREACH 192.168.0.29:80 at amx / 2 2023-09-01 13:06:03.132 - [31merror[39m: go-e.0 (11175) connect EHOSTUNREACH 192.168.0.29:80 at amx / 6 2023-09-01 13:06:03.134 - [31merror[39m: go-e.0 (11175) connect EHOSTUNREACH 192.168.0.29:80 at amx / 6 2023-09-01 13:06:07.396 - [32minfo[39m: javascript.0 (3684) script.js.common.Stromkosten.Solarinsel_Zellendifferenz: Mittelwert Liste: 22.2 2023-09-01 13:06:16.449 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 55.8 2023-09-01 13:06:17.943 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.KatzenHeizdecke: 1 2023-09-01 13:06:17.943 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.KatzenHeizdecke: false 2023-09-01 13:06:18.014 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-01 13:06:18.133 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.Bilderrahmen_view_wechsel: Wetter Außentemperatur 2023-09-01 13:06:26.412 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 56.1 2023-09-01 13:06:32.984 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-01 13:06:36.419 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 55.9 2023-09-01 13:06:46.455 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 56.1 2023-09-01 13:06:48.014 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000[33m============ Mark until here for C&P =============[0m
iob diag has finished.
Press any key for a summary
[H[2J[3JCopy text starting here:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 5.15.83-1-pve Installation: lxc Timezone: Europe/Berlin (CEST, +0200) User-ID: 1001 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 12G 4.9G 5.3G 0.0K 1.8G 7.1G Swap: 7.2G 738M 6.4G Total: 19G 5.6G 11G Active iob-Instances: 60 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.9.1 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin Objects: 224862 States: 170114 Size of iob-Database: 33M /opt/iobroker/iobroker-data/objects.jsonl 6.4M /opt/iobroker/iobroker-data/states.jsonl ********************************************************************* Some problems detected, please run [031miob fix[0m and try to have them fixed ********************************************************************* =================== END OF SUMMARY ==================== -
@homoran Nach einem Reboor klappte es nun mit npm i nopy.
Jetzt ist alles aktuell - das alte Problem mit dem Redis aber noch da.
Fast alle Adapter stehen auch nur noch auf Errorlog. Trozdem keine Veränderung.[H[2J[3J [34;107m*** ioBroker Diagnosis ***[0m Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue [H[2J[3J [34;107m*** ioBroker Diagnosis ***[0m Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue [H[2J[3J [33m======== Start marking the full check here =========[0mSkript v.2023-04-16 [34;107m*** BASE SYSTEM ***[0m Architecture : x86_64 Docker : false Virtualization : lxc Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 13:04:39 up 1:18, 1 user, load average: 6.87, 7.29, 6.93 CPU threads: 4 [34;107m*** Time and Time Zones ***[0m Local time: Fri 2023-09-01 13:04:39 CEST Universal time: Fri 2023-09-01 11:04:39 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no [34;107m*** User and Groups ***[0m iobroker /home/iobroker iobroker tty dialout audio video ssh redis [34;107m*** X-Server-Setup ***[0m X-Server: false Desktop: Terminal: tty Boot Target: graphical.target [34;107m*** MEMORY ***[0m total used free shared buff/cache available Mem: 12G 5.0G 5.2G 0.0K 1.8G 7.0G Swap: 7.2G 657M 6.5G Total: 19G 5.6G 11G 12000 M total memory 4951 M used memory 796 M active memory 5633 M inactive memory 5228 M free memory 0 M buffer memory 1819 M swap cache 7167 M total swap 657 M used swap 6510 M free swap [34;107m*** FILESYSTEM ***[0m Filesystem Type Size Used Avail Use% Mounted on /dev/loop0 ext4 63G 19G 41G 32% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 7.8G 0 7.8G 0% /dev/fuse tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.2G 184K 3.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock //192.168.0.89/video cifs 14T 7.4T 5.8T 56% /mnt/filme //192.168.0.89/VU cifs 14T 7.4T 5.8T 56% /mnt/vu //192.168.0.89/Backup cifs 14T 7.4T 5.8T 56% /mnt/backup //192.168.0.89/docker/paperless/data/consume cifs 14T 7.4T 5.8T 56% /mnt/dms_input //192.168.0.89/homes cifs 14T 7.4T 5.8T 56% /mnt/homes //192.168.0.89/Kram cifs 14T 7.4T 5.8T 56% /mnt/Kram tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1001 //192.168.0.89/Backup/iobroker cifs 14T 7.4T 5.8T 56% /opt/iobroker/backups [32mMessages concerning ext4 filesystem in dmesg:[0m [Thu Aug 10 13:41:28 2023] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Aug 10 13:41:29 2023] EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro. Quota mode: none. [Thu Aug 10 13:41:40 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Aug 10 13:41:43 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Mon Aug 21 14:07:03 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 08:20:42 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 11:42:04 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 11:45:58 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [32mShow mounted filesystems (real ones only):[0m TARGET SOURCE FSTYPE OPTIONS / /dev/loop0 ext4 rw,relatime |-/mnt/filme //192.168.0.89/video cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/vu //192.168.0.89/VU cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/backup //192.168.0.89/Backup cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/dms_input //192.168.0.89/docker/paperless/data/consume cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/homes //192.168.0.89/homes cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/Kram //192.168.0.89/Kram cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 `-/opt/iobroker/backups //192.168.0.89/Backup/iobroker cifs rw,relatime,vers=2.0,cache=strict,username=heckmic,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.0.89,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=65536,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1 [32mFiles in neuralgic directories:[0m [32m/var:[0m 5.8G /var/ 3.7G /var/log/journal/c01d62f951a24586b96d69a8f9b64825 3.7G /var/log/journal 3.7G /var/log 1.6G /var/lib Archived and active journals take up 2.9G in the file system. [32m/opt/iobroker/backups:[0m 6.0G /opt/iobroker/backups/ 8.8M /opt/iobroker/backups/vis 6.2M /opt/iobroker/backups/vis/MeinHaus 2.5M /opt/iobroker/backups/vis/main 752K /opt/iobroker/backups/vis/main/img/Hintergrund [32m/opt/iobroker/iobroker-data:[0m 55M /opt/iobroker/iobroker-data/ 16M /opt/iobroker/iobroker-data/files 11M /opt/iobroker/iobroker-data/files/vis.0 6.3M /opt/iobroker/iobroker-data/files/vis.0/MeinHaus 4.6M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo [32mThe five largest files in iobroker-data are:[0m 33M /opt/iobroker/iobroker-data/objects.jsonl 6.4M /opt/iobroker/iobroker-data/states.jsonl 1.7M /opt/iobroker/iobroker-data/files/vis.0/main/vis-views.json 1.3M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo/green.jpg 840K /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo/bakestone.jpg [34;107m*** NodeJS-Installation ***[0m /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org bullseye-security/main amd64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://ftp.debian.org/debian bullseye/main amd64 Packages [32mTemp directories causing npm8 problem:[0m 1 Some problems detected, please run [031miob fix[0m [34;107m*** ioBroker-Installation ***[0m [32mioBroker Status[0m No connection to objects 192.168.0.160:6379[redis] MULTIHOSTSERVICE/enabled: false [32mCore adapters versions[0m js-controller: 5.0.12 admin: 6.9.1 javascript: 7.1.4 Adapters from github: 5 [32mAdapter State[0m system.adapter.adguard.0 : adguard : SmarthomeVM - disabled + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : SmarthomeVM - enabled + system.adapter.backitup.0 : backitup : SmarthomeVM - enabled + system.adapter.bring.0 : bring : SmarthomeVM - enabled system.adapter.chromecast.0 : chromecast : SmarthomeVM - enabled system.adapter.daswetter.0 : daswetter : SmarthomeVM - enabled + system.adapter.denon.0 : denon : SmarthomeVM - enabled system.adapter.devices.0 : devices : SmarthomeVM - disabled + system.adapter.discovery.0 : discovery : SmarthomeVM - enabled system.adapter.dwd.0 : dwd : SmarthomeVM - enabled + system.adapter.energiefluss.0 : energiefluss : SmarthomeVM - enabled + system.adapter.energiefluss.1 : energiefluss : SmarthomeVM - enabled + system.adapter.enigma2.0 : enigma2 : SmarthomeVM - enabled + system.adapter.enigma2.1 : enigma2 : SmarthomeVM - enabled + system.adapter.fhem.0 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.1 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.2 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.3 : fhem : SmarthomeVM - enabled, port: 7072 system.adapter.flot.0 : flot : SmarthomeVM - disabled + system.adapter.fritzdect.0 : fritzdect : SmarthomeVM - enabled + system.adapter.fullcalendar.0 : fullcalendar : SmarthomeVM - enabled + system.adapter.go-e.0 : go-e : SmarthomeVM - enabled + system.adapter.ham.0 : ham : SmarthomeVM - enabled + system.adapter.harmony.0 : harmony : SmarthomeVM - enabled system.adapter.ical.0 : ical : SmarthomeVM - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: SmarthomeVM - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : SmarthomeVM - disabled system.adapter.icons-icons8.0 : icons-icons8 : SmarthomeVM - disabled system.adapter.icons-material-png.0 : icons-material-png : SmarthomeVM - disabled system.adapter.icons-material-svg.0 : icons-material-svg : SmarthomeVM - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : SmarthomeVM - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : SmarthomeVM - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: SmarthomeVM - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : SmarthomeVM - disabled + system.adapter.info.0 : info : SmarthomeVM - enabled + system.adapter.iot.0 : iot : SmarthomeVM - enabled + system.adapter.javascript.0 : javascript : SmarthomeVM - enabled system.adapter.kodi.0 : kodi : SmarthomeVM - disabled, port: 9090 system.adapter.lgtv.0 : lgtv : SmarthomeVM - disabled system.adapter.midea.0 : midea : SmarthomeVM - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : SmarthomeVM - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : SmarthomeVM - enabled, port: 54321, bind: 0.0.0.0 system.adapter.mihome-vacuum.1 : mihome-vacuum : SmarthomeVM - disabled, port: 54321 + system.adapter.mihome.0 : mihome : SmarthomeVM - enabled, port: 9898, bind: 192.168.0.160 system.adapter.mobile.0 : mobile : SmarthomeVM - disabled + system.adapter.mqtt.0 : mqtt : SmarthomeVM - enabled, port: 1889, bind: 192.168.0.160 + system.adapter.mqtt.1 : mqtt : solaranzeige - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : SmarthomeVM - enabled + system.adapter.nina.0 : nina : SmarthomeVM - enabled + system.adapter.nuki.0 : nuki : SmarthomeVM - enabled system.adapter.openweathermap.0 : openweathermap : SmarthomeVM - enabled + system.adapter.ping.0 : ping : SmarthomeVM - enabled + system.adapter.proxmox.0 : proxmox : SmarthomeVM - enabled, port: 8006 + system.adapter.pvforecast.0 : pvforecast : SmarthomeVM - enabled + system.adapter.pvoutputorg.0 : pvoutputorg : SmarthomeVM - enabled + system.adapter.renault.0 : renault : SmarthomeVM - enabled + system.adapter.sainlogic.0 : sainlogic : SmarthomeVM - enabled, port: 45000, bind: 192.168.0.160 + system.adapter.scenes.0 : scenes : SmarthomeVM - enabled + system.adapter.scheduler.0 : scheduler : SmarthomeVM - enabled system.adapter.schoolfree.0 : schoolfree : SmarthomeVM - enabled + system.adapter.shelly.0 : shelly : SmarthomeVM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : SmarthomeVM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : SmarthomeVM - enabled, port: 1883, bind: 192.168.0.160 + system.adapter.sql.0 : sql : SmarthomeVM - enabled, port: 3306 + system.adapter.synology.0 : synology : SmarthomeVM - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : SmarthomeVM - enabled + system.adapter.telegram.0 : telegram : SmarthomeVM - enabled, port: 8443, bind: 0.0.0.0 system.adapter.telegram.1 : telegram : SmarthomeVM - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : SmarthomeVM - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.tesla-motors.0 : tesla-motors : SmarthomeVM - enabled + system.adapter.text2command.0 : text2command : SmarthomeVM - enabled + system.adapter.tr-064.0 : tr-064 : SmarthomeVM - enabled system.adapter.tuya.0 : tuya : SmarthomeVM - disabled + system.adapter.unifi.0 : unifi : SmarthomeVM - enabled + system.adapter.upnp.0 : upnp : SmarthomeVM - enabled + system.adapter.vedirect.0 : vedirect : solaranzeige - enabled system.adapter.vis-2-beta.0 : vis-2-beta : SmarthomeVM - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : SmarthomeVM - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: SmarthomeVM - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : SmarthomeVM - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : SmarthomeVM - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : SmarthomeVM - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : SmarthomeVM - disabled system.adapter.vis-justgage.0 : vis-justgage : SmarthomeVM - disabled system.adapter.vis-lcars.0 : vis-lcars : SmarthomeVM - disabled system.adapter.vis-map.0 : vis-map : SmarthomeVM - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : SmarthomeVM - disabled system.adapter.vis-metro.0 : vis-metro : SmarthomeVM - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : SmarthomeVM - disabled system.adapter.vis-weather.0 : vis-weather : SmarthomeVM - disabled system.adapter.vis.0 : vis : SmarthomeVM - enabled system.adapter.weatherunderground.0 : weatherunderground : SmarthomeVM - enabled + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : SmarthomeVM - enabled system.adapter.windows-control.0 : windows-control : SmarthomeVM - disabled + system.adapter.wolf.0 : wolf : SmarthomeVM - enabled, port: 12004, bind: 192.168.0.160 + system.adapter.worx.0 : worx : SmarthomeVM - enabled + system.adapter.ws.0 : ws : SmarthomeVM - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.xbox.0 : xbox : SmarthomeVM - disabled + system.adapter.yahka.0 : yahka : SmarthomeVM - enabled system.adapter.yeelight-2.0 : yeelight-2 : SmarthomeVM - enabled + system.adapter.zigbee.0 : zigbee : SmarthomeVM - enabled, port: /dev/ttyUSB0 + instance is alive [32mEnabled adapters with bindings[0m + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.fhem.0 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.1 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.2 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.3 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.mihome-vacuum.0 : mihome-vacuum : SmarthomeVM - enabled, port: 54321, bind: 0.0.0.0 + system.adapter.mihome.0 : mihome : SmarthomeVM - enabled, port: 9898, bind: 192.168.0.160 + system.adapter.mqtt.0 : mqtt : SmarthomeVM - enabled, port: 1889, bind: 192.168.0.160 + system.adapter.mqtt.1 : mqtt : solaranzeige - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : SmarthomeVM - enabled, port: 8006 + system.adapter.sainlogic.0 : sainlogic : SmarthomeVM - enabled, port: 45000, bind: 192.168.0.160 + system.adapter.shelly.0 : shelly : SmarthomeVM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : SmarthomeVM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : SmarthomeVM - enabled, port: 1883, bind: 192.168.0.160 + system.adapter.sql.0 : sql : SmarthomeVM - enabled, port: 3306 + system.adapter.synology.0 : synology : SmarthomeVM - enabled, port: 5000 + system.adapter.telegram.0 : telegram : SmarthomeVM - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : SmarthomeVM - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin + system.adapter.wolf.0 : wolf : SmarthomeVM - enabled, port: 12004, bind: 192.168.0.160 + system.adapter.ws.0 : ws : SmarthomeVM - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : SmarthomeVM - enabled, port: /dev/ttyUSB0 [32mioBroker-Repositories[0m Beta (latest) : http://download.iobroker.net/sources-dist.json stable : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable [32mInstalled ioBroker-Instances[0m Used repository: stable Adapter "adguard" : 0.0.8 , installed 0.0.8 Adapter "admin" : 6.9.1 , installed 6.9.1 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "backitup" : 2.7.0 , installed 2.7.0 Adapter "bring" : 1.8.1 , installed 1.8.1 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.2.0 , installed 3.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "enigma2" : 2.0.2 , installed 2.0.2 Adapter "esphome" : 0.2.4 , installed 0.2.4 Adapter "fhem" : 2.0.5 , installed 2.0.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullcalendar" : 2.2.6 , installed 2.2.6 Adapter "go-e" : 1.0.27 , installed 1.0.27 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 2.0.9 , installed 2.0.9 Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openweathermap": 0.4.2 , installed 0.4.2 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 1.3.5 , installed 1.3.5 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "pvoutputorg" : 1.8.9 , installed 1.8.9 Adapter "renault" : 0.0.21 , installed 0.0.21 Adapter "sainlogic" : 0.10.5 , installed 0.10.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "scheduler" : 1.1.9 , installed 1.1.9 Adapter "schoolfree" : 1.1.1 , installed 1.1.1 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.7 , installed 2.5.7 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vedirect" : 0.3.0 , installed 0.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.3.0, installed 0.3.0 Adapter "vis-2-widgets-jaeger-design": 1.0.0, installed 1.0.0 Adapter "vis-2-widgets-material": 1.0.0, installed 1.0.0 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.3, installed 3.4.3 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wolf" : 1.7.0 , installed 1.7.0 Adapter "worx" : 2.3.2 , installed 2.3.2 Adapter "ws" : 2.5.3 , installed 2.5.3 Adapter "xbox" : 1.0.2 , installed 1.0.2 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "yeelight-2" : 1.2.1 , installed 1.2.1 Adapter "zigbee" : 1.8.23 , installed 1.8.23 [32mObjects and States[0m Please stand by - This may take a while Objects: 224862 States: 170114 [34;107m*** OS-Repositories and Updates ***[0m Hit:1 http://security.debian.org bullseye-security InRelease Hit:2 http://ftp.debian.org/debian bullseye InRelease Hit:3 http://ftp.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 [34;107m*** Listening Ports ***[0m Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:33965 0.0.0.0:* LISTEN 0 213136649 211/rpc.mountd tcp 0 0 0.0.0.0:34099 0.0.0.0:* LISTEN 0 213135008 - tcp 0 0 192.168.0.160:1883 0.0.0.0:* LISTEN 1001 213177430 3884/io.sonoff.0 tcp 0 0 192.168.0.160:1890 0.0.0.0:* LISTEN 1001 213485766 68123/io.mqtt.0 tcp 0 0 192.168.0.160:1889 0.0.0.0:* LISTEN 1001 213485765 68123/io.mqtt.0 tcp 0 0 127.0.0.1:33275 0.0.0.0:* LISTEN 1001 213198887 5603/io.yahka.0 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 104 213135940 157/systemd-resolve tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 213134111 1/init tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 213149422 2124/master tcp 0 0 0.0.0.0:36395 0.0.0.0:* LISTEN 0 213136661 211/rpc.mountd tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 110 213137479 265/mariadbd tcp 0 0 192.168.0.160:45000 0.0.0.0:* LISTEN 1001 213180762 4101/io.sainlogic.0 tcp 0 0 192.168.0.160:12004 0.0.0.0:* LISTEN 1001 213176337 3765/io.wolf.0 tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN 0 213135966 - tcp 0 0 0.0.0.0:46657 0.0.0.0:* LISTEN 1001 213190075 5603/io.yahka.0 tcp 0 0 0.0.0.0:46873 0.0.0.0:* LISTEN 0 213136673 211/rpc.mountd tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 104 213135934 157/systemd-resolve tcp 0 0 0.0.0.0:8084 0.0.0.0:* LISTEN 998 213150307 2215/perl tcp 0 0 0.0.0.0:8085 0.0.0.0:* LISTEN 998 213150308 2215/perl tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 998 213150306 2215/perl tcp 0 0 192.168.0.160:6379 0.0.0.0:* LISTEN 109 213541673 81725/redis-server tcp 0 0 192.168.0.160:8082 0.0.0.0:* LISTEN 1001 213186243 4697/io.web.0 tcp 0 0 0.0.0.0:7072 0.0.0.0:* LISTEN 998 213151890 2215/perl tcp6 0 0 :::34457 :::* LISTEN 0 213135982 - tcp6 0 0 ::1:6379 :::* LISTEN 109 213541674 81725/redis-server tcp6 0 0 :::80 :::* LISTEN 0 213151075 2156/apache2 tcp6 0 0 :::111 :::* LISTEN 0 213136394 1/init tcp6 0 0 :::22 :::* LISTEN 0 213135903 1/init tcp6 0 0 :::52417 :::* LISTEN 0 213136667 211/rpc.mountd tcp6 0 0 :::2049 :::* LISTEN 0 213135973 - tcp6 0 0 :::5355 :::* LISTEN 104 213135937 157/systemd-resolve tcp6 0 0 :::37563 :::* LISTEN 0 213136679 211/rpc.mountd tcp6 0 0 :::61991 :::* LISTEN 1001 213181724 4241/io.harmony.0 tcp6 0 0 :::37757 :::* LISTEN 0 213136655 211/rpc.mountd tcp6 0 0 :::8088 :::* LISTEN 1001 213192646 6820/io.ws.0 tcp6 0 0 :::8089 :::* LISTEN 1001 213186350 4926/io.terminal.0 tcp6 0 0 :::8087 :::* LISTEN 1001 213316775 33376/io.simple-api tcp6 0 0 :::8081 :::* LISTEN 1001 213559664 83132/io.admin.0 tcp6 0 0 :::8000 :::* LISTEN 1001 213559744 83010/io.upnp.0 tcp6 0 0 ::1:25 :::* LISTEN 0 213149423 2124/master udp 0 0 0.0.0.0:2049 0.0.0.0:* 0 213136686 - udp 0 0 0.0.0.0:51426 0.0.0.0:* 0 213135007 - udp 0 0 0.0.0.0:52404 0.0.0.0:* 1001 213549428 83010/io.upnp.0 udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 213301600 29585/io.mihome-vac udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 213181725 4241/io.harmony.0 udp 0 0 192.168.0.160:5353 0.0.0.0:* 1001 213327960 35089/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 213190072 5603/io.yahka.0 udp 0 0 0.0.0.0:5355 0.0.0.0:* 104 213135933 157/systemd-resolve udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 213176354 3783/io.shelly.0 udp 0 0 0.0.0.0:55457 0.0.0.0:* 0 213136658 211/rpc.mountd udp 0 0 127.0.0.53:53 0.0.0.0:* 104 213135939 157/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 213135815 1/init udp 0 0 0.0.0.0:57623 0.0.0.0:* 0 213136646 211/rpc.mountd udp 0 0 0.0.0.0:41969 0.0.0.0:* 0 213136670 211/rpc.mountd udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 213299115 30131/io.mihome.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 213552686 83010/io.upnp.0 udp6 0 0 :::2049 :::* 0 213135974 - udp6 0 0 :::5355 :::* 104 213135936 157/systemd-resolve udp6 0 0 :::54956 :::* 0 213135981 - udp6 0 0 :::55128 :::* 0 213136676 211/rpc.mountd udp6 0 0 :::40961 :::* 0 213136652 211/rpc.mountd udp6 0 0 :::111 :::* 0 213134777 1/init udp6 0 0 :::57937 :::* 0 213136664 211/rpc.mountd [34;107m*** Log File - Last 25 Lines ***[0m 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Vorherage: 59 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_WInd0 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_Regen0 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_zu_dunkel: true 2023-09-01 13:06:00.026 - [32minfo[39m: javascript.0 (3684) script.js.common.Markisenauomatik: Markise_auslöser_zu_dunkel_MIttelwert11817 2023-09-01 13:06:00.036 - [32minfo[39m: javascript.0 (3684) script.js.go-e.Leistungsregelung_Solarinsel: Go-e an Insel 2023-09-01 13:06:00.036 - [32minfo[39m: javascript.0 (3684) script.js.go-e.Leistungsregelung_Solarinsel: Ladeleistung: -145 2023-09-01 13:06:00.036 - [32minfo[39m: javascript.0 (3684) script.js.go-e.Leistungsregelung_Solarinsel: Gesamtleistung: 758 2023-09-01 13:06:00.042 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.Bilderrahmen_view_wechsel: 8 2023-09-01 13:06:00.042 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.Bilderrahmen_view_wechsel: Energiefluss 2023-09-01 13:06:02.974 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-01 13:06:03.129 - [31merror[39m: go-e.0 (11175) connect EHOSTUNREACH 192.168.0.29:80 at amx / 2 2023-09-01 13:06:03.132 - [31merror[39m: go-e.0 (11175) connect EHOSTUNREACH 192.168.0.29:80 at amx / 6 2023-09-01 13:06:03.134 - [31merror[39m: go-e.0 (11175) connect EHOSTUNREACH 192.168.0.29:80 at amx / 6 2023-09-01 13:06:07.396 - [32minfo[39m: javascript.0 (3684) script.js.common.Stromkosten.Solarinsel_Zellendifferenz: Mittelwert Liste: 22.2 2023-09-01 13:06:16.449 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 55.8 2023-09-01 13:06:17.943 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.KatzenHeizdecke: 1 2023-09-01 13:06:17.943 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.KatzenHeizdecke: false 2023-09-01 13:06:18.014 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-01 13:06:18.133 - [32minfo[39m: javascript.0 (3684) script.js.common.Sonstiges.Bilderrahmen_view_wechsel: Wetter Außentemperatur 2023-09-01 13:06:26.412 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 56.1 2023-09-01 13:06:32.984 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-01 13:06:36.419 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 55.9 2023-09-01 13:06:46.455 - [32minfo[39m: javascript.0 (3684) script.js.common.Fenster.Garagensteuerung_ESP: 56.1 2023-09-01 13:06:48.014 - [31merror[39m: sainlogic.0 (4101) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000[33m============ Mark until here for C&P =============[0m
iob diag has finished.
Press any key for a summary
[H[2J[3JCopy text starting here:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 5.15.83-1-pve Installation: lxc Timezone: Europe/Berlin (CEST, +0200) User-ID: 1001 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 12G 4.9G 5.3G 0.0K 1.8G 7.1G Swap: 7.2G 738M 6.4G Total: 19G 5.6G 11G Active iob-Instances: 60 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.9.1 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin Objects: 224862 States: 170114 Size of iob-Database: 33M /opt/iobroker/iobroker-data/objects.jsonl 6.4M /opt/iobroker/iobroker-data/states.jsonl ********************************************************************* Some problems detected, please run [031miob fix[0m and try to have them fixed ********************************************************************* =================== END OF SUMMARY ==================== -
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
Nach einem Reboor klappte es nun mit npm i nopy.
ich hab's wieder nicht gesehen!
was sind das alles für Sonderzeichen in deinem Output?
-
@homoran Ich leite die Ausgabe von iob diag in eine Datei um und paste das hier. Ich weiß nicht warum die Zeichen dabei komisch werden.
-
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
Ich leite die Ausgabe von iob diag in eine Datei um
Nicht notwendig, das landet eh schon in /home/iobroker
Besser kopiert man das aber 1:1 aus dem Terminal. Mit gescheiten funktioniert das auch sehr gut.
-
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
Ich weiß nicht warum die Zeichen dabei komisch werden.
wahrscheinlich handeltces sich um Steuerzeichen von einem unnötigen Windows Programm
-
@homoran sagte in iobroker kaum benutzbar - redis 100%:
wahrscheinlich handeltces sich um Steuerzeichen von einem unnötigen Windows Programm
Nein, das sind die Zeichen, die für bunte Schrift usw. in der Ausgabe von iob diag sorgen. Das Terminal wandelt die entsprechend in der Darstellung auf der Standard-Ausgabe um, aber nicht wenn der Datenstrom in eine Datei umgeleitet wird.
-
@thomas-braun sagte in iobroker kaum benutzbar - redis 100%:
das sind die Zeichen, die für bunte Schrift usw. in der Ausgabe von iob diag sorgen
as I said:
und das unnötige WIN Programm stellt diese als Steuerzeichen dar -
@homoran MIt der Node 18 Tuts dann der yeelight Adapter nicht mehr. Ich habe ja zwei instanzen. Eine in der Garage beim Wechselrichter via USB (Ve. direkt) und eine im Haus. Auf der in der Garage läuft nun node 16 wieder und das yeelight ist da. Aber: Auf dem Master ist die Performance dank redis immernoch unterirdisch.
-
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Architecture : x86_64 Docker : false Virtualization : lxc Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 08:28:39 up 1 day, 17:00, 1 user, load average: 1.42, 1.51, 1.39 CPU threads: 4 *** Time and Time Zones *** Local time: Mon 2023-09-04 08:28:41 CEST Universal time: Mon 2023-09-04 06:28:41 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker tty dialout audio video ssh redis *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 12G 5.2G 3.8G 0.0K 2.9G 6.8G Swap: 7.2G 938M 6.2G Total: 19G 6.2G 10G 12000 M total memory 5238 M used memory 1763 M active memory 6093 M inactive memory 3823 M free memory 0 M buffer memory 2937 M swap cache 7167 M total swap 938 M used swap 6229 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/loop0 ext4 63G 19G 41G 32% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 7.8G 0 7.8G 0% /dev/fuse tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.2G 184K 3.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock //192.168.0.89/video cifs 14T 7.4T 5.8T 57% /mnt/filme //192.168.0.89/Kram cifs 14T 7.4T 5.8T 57% /mnt/Kram //192.168.0.89/VU cifs 14T 7.4T 5.8T 57% /mnt/vu //192.168.0.89/Backup cifs 14T 7.4T 5.8T 57% /mnt/backup //192.168.0.89/homes cifs 14T 7.4T 5.8T 57% /mnt/homes //192.168.0.89/docker/paperless/data/consume cifs 14T 7.4T 5.8T 57% /mnt/dms_input tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Thu Aug 10 13:41:28 2023] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Aug 10 13:41:29 2023] EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro. Quota mode: none. [Thu Aug 10 13:41:40 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Aug 10 13:41:43 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Mon Aug 21 14:07:03 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 08:20:42 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 11:42:04 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Fri Sep 1 11:45:58 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Sep 2 14:24:50 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Sep 2 15:00:06 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Sep 2 15:00:22 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Sep 2 15:01:23 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Sep 2 15:28:28 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/loop0 ext4 rw,relatime |-/mnt/filme //192.168.0.89/video cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/Kram //192.168.0.89/Kram cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/vu //192.168.0.89/VU cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/backup //192.168.0.89/Backup cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 |-/mnt/homes //192.168.0.89/homes cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 `-/mnt/dms_input //192.168.0.89/docker/paperless/data/consume cifs rw,relatime,vers=3.1.1,cache=strict,username=heckmic,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.89,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1 Files in neuralgic directories: /var: 5.8G /var/ 3.7G /var/log/journal/c01d62f951a24586b96d69a8f9b64825 3.7G /var/log/journal 3.7G /var/log 1.6G /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 2.9G in the file system. /opt/iobroker/backups: 739M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 55M /opt/iobroker/iobroker-data/ 16M /opt/iobroker/iobroker-data/files 11M /opt/iobroker/iobroker-data/files/vis.0 6.3M /opt/iobroker/iobroker-data/files/vis.0/MeinHaus 4.6M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/objects.jsonl 6.4M /opt/iobroker/iobroker-data/states.jsonl 1.7M /opt/iobroker/iobroker-data/files/vis.0/main/vis-views.json 1.3M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo/green.jpg 840K /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/demo/bakestone.jpg *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org bullseye-security/main amd64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://ftp.debian.org/debian bullseye/main amd64 Packages Temp directories causing npm8 problem: 1 Some problems detected, please run iob fix *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 5.0.12 admin: 6.9.2 javascript: 7.1.4 Adapters from github: 5 Adapter State system.adapter.adguard.0 : adguard : SmarthomeVM - disabled + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : SmarthomeVM - enabled + system.adapter.backitup.0 : backitup : SmarthomeVM - enabled + system.adapter.bring.0 : bring : SmarthomeVM - enabled + system.adapter.chromecast.0 : chromecast : SmarthomeVM - enabled system.adapter.daswetter.0 : daswetter : SmarthomeVM - enabled + system.adapter.denon.0 : denon : SmarthomeVM - enabled system.adapter.devices.0 : devices : SmarthomeVM - disabled + system.adapter.discovery.0 : discovery : SmarthomeVM - enabled system.adapter.dwd.0 : dwd : SmarthomeVM - enabled + system.adapter.energiefluss.0 : energiefluss : SmarthomeVM - enabled + system.adapter.energiefluss.1 : energiefluss : SmarthomeVM - enabled + system.adapter.enigma2.0 : enigma2 : SmarthomeVM - enabled + system.adapter.enigma2.1 : enigma2 : SmarthomeVM - enabled + system.adapter.fhem.0 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.1 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.2 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.3 : fhem : SmarthomeVM - enabled, port: 7072 system.adapter.flot.0 : flot : SmarthomeVM - disabled + system.adapter.fritzdect.0 : fritzdect : SmarthomeVM - enabled + system.adapter.fullcalendar.0 : fullcalendar : SmarthomeVM - enabled + system.adapter.go-e.0 : go-e : SmarthomeVM - enabled + system.adapter.ham.0 : ham : SmarthomeVM - enabled + system.adapter.harmony.0 : harmony : SmarthomeVM - enabled system.adapter.ical.0 : ical : SmarthomeVM - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: SmarthomeVM - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : SmarthomeVM - disabled system.adapter.icons-icons8.0 : icons-icons8 : SmarthomeVM - disabled system.adapter.icons-material-png.0 : icons-material-png : SmarthomeVM - disabled system.adapter.icons-material-svg.0 : icons-material-svg : SmarthomeVM - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : SmarthomeVM - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : SmarthomeVM - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: SmarthomeVM - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : SmarthomeVM - disabled + system.adapter.info.0 : info : SmarthomeVM - enabled + system.adapter.iot.0 : iot : SmarthomeVM - enabled + system.adapter.javascript.0 : javascript : SmarthomeVM - enabled system.adapter.kodi.0 : kodi : SmarthomeVM - disabled, port: 9090 system.adapter.lgtv.0 : lgtv : SmarthomeVM - disabled + system.adapter.midea.0 : midea : SmarthomeVM - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : SmarthomeVM - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : SmarthomeVM - enabled, port: 54321, bind: 0.0.0.0 system.adapter.mihome-vacuum.1 : mihome-vacuum : SmarthomeVM - disabled, port: 54321 + system.adapter.mihome.0 : mihome : SmarthomeVM - enabled, port: 9898, bind: 192.168.0.160 system.adapter.mobile.0 : mobile : SmarthomeVM - disabled + system.adapter.mqtt.0 : mqtt : SmarthomeVM - enabled, port: 1889, bind: 192.168.0.160 + system.adapter.mqtt.1 : mqtt : solaranzeige - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : SmarthomeVM - enabled + system.adapter.nina.0 : nina : SmarthomeVM - enabled + system.adapter.nuki.0 : nuki : SmarthomeVM - enabled system.adapter.openweathermap.0 : openweathermap : SmarthomeVM - enabled + system.adapter.ping.0 : ping : SmarthomeVM - enabled + system.adapter.proxmox.0 : proxmox : SmarthomeVM - enabled, port: 8006 + system.adapter.pvforecast.0 : pvforecast : SmarthomeVM - enabled + system.adapter.pvoutputorg.0 : pvoutputorg : SmarthomeVM - enabled + system.adapter.renault.0 : renault : SmarthomeVM - enabled + system.adapter.sainlogic.0 : sainlogic : SmarthomeVM - enabled, port: 45000, bind: 192.168.0.160 + system.adapter.scenes.0 : scenes : SmarthomeVM - enabled + system.adapter.scheduler.0 : scheduler : SmarthomeVM - enabled system.adapter.schoolfree.0 : schoolfree : SmarthomeVM - enabled + system.adapter.shelly.0 : shelly : SmarthomeVM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : SmarthomeVM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : SmarthomeVM - enabled, port: 1883, bind: 192.168.0.160 + system.adapter.sql.0 : sql : SmarthomeVM - enabled, port: 3306 + system.adapter.synology.0 : synology : SmarthomeVM - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : SmarthomeVM - enabled + system.adapter.telegram.0 : telegram : SmarthomeVM - enabled, port: 8443, bind: 0.0.0.0 system.adapter.telegram.1 : telegram : SmarthomeVM - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : SmarthomeVM - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.tesla-motors.0 : tesla-motors : SmarthomeVM - enabled + system.adapter.text2command.0 : text2command : SmarthomeVM - enabled + system.adapter.tr-064.0 : tr-064 : SmarthomeVM - enabled system.adapter.tuya.0 : tuya : SmarthomeVM - disabled + system.adapter.unifi.0 : unifi : SmarthomeVM - enabled + system.adapter.upnp.0 : upnp : SmarthomeVM - enabled + system.adapter.vedirect.0 : vedirect : solaranzeige - enabled system.adapter.vis-2-beta.0 : vis-2-beta : SmarthomeVM - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : SmarthomeVM - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: SmarthomeVM - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : SmarthomeVM - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : SmarthomeVM - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : SmarthomeVM - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : SmarthomeVM - disabled system.adapter.vis-justgage.0 : vis-justgage : SmarthomeVM - disabled system.adapter.vis-lcars.0 : vis-lcars : SmarthomeVM - disabled system.adapter.vis-map.0 : vis-map : SmarthomeVM - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : SmarthomeVM - disabled system.adapter.vis-metro.0 : vis-metro : SmarthomeVM - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : SmarthomeVM - disabled system.adapter.vis-weather.0 : vis-weather : SmarthomeVM - disabled system.adapter.vis.0 : vis : SmarthomeVM - enabled system.adapter.weatherunderground.0 : weatherunderground : SmarthomeVM - enabled + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : SmarthomeVM - enabled system.adapter.windows-control.0 : windows-control : SmarthomeVM - disabled + system.adapter.wolf.0 : wolf : SmarthomeVM - enabled, port: 12004, bind: 192.168.0.160 + system.adapter.worx.0 : worx : SmarthomeVM - enabled + system.adapter.ws.0 : ws : SmarthomeVM - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.xbox.0 : xbox : SmarthomeVM - disabled + system.adapter.yahka.0 : yahka : SmarthomeVM - enabled + system.adapter.yeelight-2.0 : yeelight-2 : solaranzeige - enabled + system.adapter.zigbee.0 : zigbee : SmarthomeVM - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : SmarthomeVM - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.fhem.0 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.1 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.2 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.fhem.3 : fhem : SmarthomeVM - enabled, port: 7072 + system.adapter.mihome-vacuum.0 : mihome-vacuum : SmarthomeVM - enabled, port: 54321, bind: 0.0.0.0 + system.adapter.mihome.0 : mihome : SmarthomeVM - enabled, port: 9898, bind: 192.168.0.160 + system.adapter.mqtt.0 : mqtt : SmarthomeVM - enabled, port: 1889, bind: 192.168.0.160 + system.adapter.mqtt.1 : mqtt : solaranzeige - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : SmarthomeVM - enabled, port: 8006 + system.adapter.sainlogic.0 : sainlogic : SmarthomeVM - enabled, port: 45000, bind: 192.168.0.160 + system.adapter.shelly.0 : shelly : SmarthomeVM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : SmarthomeVM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : SmarthomeVM - enabled, port: 1883, bind: 192.168.0.160 + system.adapter.sql.0 : sql : SmarthomeVM - enabled, port: 3306 + system.adapter.synology.0 : synology : SmarthomeVM - enabled, port: 5000 + system.adapter.telegram.0 : telegram : SmarthomeVM - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : SmarthomeVM - enabled, port: 8089, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : SmarthomeVM - enabled, port: 8082, bind: 192.168.0.160, run as: admin + system.adapter.wolf.0 : wolf : SmarthomeVM - enabled, port: 12004, bind: 192.168.0.160 + system.adapter.ws.0 : ws : SmarthomeVM - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : SmarthomeVM - enabled, port: /dev/ttyUSB0 ioBroker-Repositories Beta (latest) : http://download.iobroker.net/sources-dist.json stable : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "adguard" : 0.0.8 , installed 0.0.8 Adapter "admin" : 6.9.2 , installed 6.9.2 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "backitup" : 2.7.0 , installed 2.7.0 Adapter "bring" : 1.8.1 , installed 1.8.1 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.2.0 , installed 3.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "enigma2" : 2.0.2 , installed 2.0.2 Adapter "esphome" : 0.2.4 , installed 0.2.4 Adapter "fhem" : 2.0.5 , installed 2.0.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullcalendar" : 2.2.6 , installed 2.2.6 Adapter "go-e" : 1.0.27 , installed 1.0.27 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 2.0.9 , installed 2.0.9 Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openweathermap": 0.4.2 , installed 0.4.2 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 1.3.5 , installed 1.3.5 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "pvoutputorg" : 1.8.9 , installed 1.8.9 Adapter "renault" : 0.0.21 , installed 0.0.21 Adapter "sainlogic" : 0.10.5 , installed 0.10.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "scheduler" : 1.1.9 , installed 1.1.9 Adapter "schoolfree" : 1.1.1 , installed 1.1.1 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.7 , installed 2.5.7 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vedirect" : 0.3.0 , installed 0.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.3.0, installed 0.3.0 Adapter "vis-2-widgets-jaeger-design": 1.0.0, installed 1.0.0 Adapter "vis-2-widgets-material": 1.0.0, installed 1.0.0 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.3, installed 3.4.3 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wolf" : 1.7.0 , installed 1.7.0 Adapter "worx" : 2.3.2 , installed 2.3.2 Adapter "ws" : 2.5.3 , installed 2.5.3 Adapter "xbox" : 1.0.2 , installed 1.0.2 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "yeelight-2" : 1.2.1 , installed 1.2.1 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 225120 States: 170334 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org bullseye-security InRelease Hit:2 http://ftp.debian.org/debian bullseye InRelease Hit:3 http://ftp.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.0.160:1889 0.0.0.0:* LISTEN 1001 237838121 3345500/io.mqtt.0 tcp 0 0 192.168.0.160:1890 0.0.0.0:* LISTEN 1001 237838122 3345500/io.mqtt.0 tcp 0 0 192.168.0.160:1883 0.0.0.0:* LISTEN 1001 223197660 1052/io.sonoff.0 tcp 0 0 0.0.0.0:36915 0.0.0.0:* LISTEN 1001 223214833 4189/io.yahka.0 tcp 0 0 127.0.0.1:34695 0.0.0.0:* LISTEN 1001 238242887 4189/io.yahka.0 tcp 0 0 127.0.0.1:34621 0.0.0.0:* LISTEN 1001 229383613 4189/io.yahka.0 tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 104 223190531 216/systemd-resolve tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 223215451 5038/master tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 110 223190750 309/mariadbd tcp 0 0 192.168.0.160:45000 0.0.0.0:* LISTEN 1001 223217924 5113/io.sainlogic.0 tcp 0 0 192.168.0.160:12004 0.0.0.0:* LISTEN 1001 223194922 809/io.wolf.0 tcp 0 0 127.0.0.1:44547 0.0.0.0:* LISTEN 1001 238513809 4189/io.yahka.0 tcp 0 0 0.0.0.0:7072 0.0.0.0:* LISTEN 998 223216130 5075/perl tcp 0 0 127.0.0.1:43673 0.0.0.0:* LISTEN 1001 223214885 4189/io.yahka.0 tcp 0 0 0.0.0.0:56851 0.0.0.0:* LISTEN 0 223191442 253/rpc.mountd tcp 0 0 0.0.0.0:8084 0.0.0.0:* LISTEN 998 223214507 5075/perl tcp 0 0 0.0.0.0:8085 0.0.0.0:* LISTEN 998 223214508 5075/perl tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 998 223214506 5075/perl tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 104 223190537 216/systemd-resolve tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 223191196 1/init tcp 0 0 0.0.0.0:33899 0.0.0.0:* LISTEN 0 223191459 253/rpc.mountd tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN 0 223191482 - tcp 0 0 192.168.0.160:8082 0.0.0.0:* LISTEN 1001 223213573 3965/io.web.0 tcp 0 0 0.0.0.0:52439 0.0.0.0:* LISTEN 0 223191451 253/rpc.mountd tcp 0 0 0.0.0.0:36577 0.0.0.0:* LISTEN 0 223191501 - tcp 0 0 192.168.0.160:6379 0.0.0.0:* LISTEN 109 223192404 249/redis-server 19 tcp6 0 0 :::45311 :::* LISTEN 0 223191463 253/rpc.mountd tcp6 0 0 :::61991 :::* LISTEN 1001 223204847 2040/io.harmony.0 tcp6 0 0 :::5355 :::* LISTEN 104 223190534 216/systemd-resolve tcp6 0 0 ::1:25 :::* LISTEN 0 223215452 5038/master tcp6 0 0 :::8087 :::* LISTEN 1001 223203085 2106/io.simple-api. tcp6 0 0 :::8081 :::* LISTEN 1001 225328997 481188/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 223219004 5260/io.ws.0 tcp6 0 0 :::8089 :::* LISTEN 1001 223204154 2237/io.terminal.0 tcp6 0 0 :::8000 :::* LISTEN 1001 223265564 4034/io.upnp.0 tcp6 0 0 :::22 :::* LISTEN 0 223192281 1/init tcp6 0 0 :::80 :::* LISTEN 0 223215272 4759/apache2 tcp6 0 0 :::111 :::* LISTEN 0 223190283 1/init tcp6 0 0 ::1:6379 :::* LISTEN 109 223192405 249/redis-server 19 tcp6 0 0 :::42367 :::* LISTEN 0 223191455 253/rpc.mountd tcp6 0 0 :::2049 :::* LISTEN 0 223191493 - tcp6 0 0 :::43361 :::* LISTEN 0 223191503 - tcp6 0 0 :::60265 :::* LISTEN 0 223191446 253/rpc.mountd udp 0 0 127.0.0.53:53 0.0.0.0:* 104 223190536 216/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 223191197 1/init udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 223201036 1467/io.mihome.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 223215737 4034/io.upnp.0 udp 0 0 0.0.0.0:59377 0.0.0.0:* 0 223191449 253/rpc.mountd udp 0 0 0.0.0.0:2049 0.0.0.0:* 0 223190610 - udp 0 0 0.0.0.0:60799 0.0.0.0:* 0 223191500 - udp 0 0 0.0.0.0:60925 0.0.0.0:* 0 223191457 253/rpc.mountd udp 0 0 0.0.0.0:37012 0.0.0.0:* 1001 223213102 4034/io.upnp.0 udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 223199340 1133/io.mihome-vacu udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 223204848 2040/io.harmony.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 237935756 3366917/io.chromeca udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 223214830 4189/io.yahka.0 udp 0 0 192.168.0.160:5353 0.0.0.0:* 1001 223199863 1357/io.tr-064.0 udp 0 0 0.0.0.0:5355 0.0.0.0:* 104 223190530 216/systemd-resolve udp 0 0 0.0.0.0:38293 0.0.0.0:* 0 223192360 253/rpc.mountd udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 231276398 1851724/io.shelly.0 udp6 0 0 :::47971 :::* 0 223191461 253/rpc.mountd udp6 0 0 :::111 :::* 0 223192111 1/init udp6 0 0 :::2049 :::* 0 223190611 - udp6 0 0 :::59677 :::* 0 223191502 - udp6 0 0 :::43399 :::* 0 223191453 253/rpc.mountd udp6 0 0 :::36573 :::* 0 223191444 253/rpc.mountd udp6 0 0 :::5355 :::* 104 223190533 216/systemd-resolve *** Log File - Last 25 Lines *** 2023-09-04 08:33:00.016 - info: javascript.0 (3026558) script.js.common.Markisenauomatik: Markise_auslöser_zu_dunkel_MIttelwert0 2023-09-04 08:33:00.016 - info: javascript.0 (3026558) script.js.common.Markisenauomatik: aktiv 2023-09-04 08:33:00.016 - info: javascript.0 (3026558) script.js.common.Markisenauomatik: In der Schleife 2023-09-04 08:33:00.030 - info: javascript.0 (3026558) script.js.go-e.Leistungsregelung_Solarinsel: Go-e an Insel 2023-09-04 08:33:00.030 - info: javascript.0 (3026558) script.js.go-e.Leistungsregelung_Solarinsel: Ladeleistung: 1837 2023-09-04 08:33:00.030 - info: javascript.0 (3026558) script.js.go-e.Leistungsregelung_Solarinsel: Gesamtleistung: 2346 2023-09-04 08:33:00.030 - info: javascript.0 (3026558) script.js.go-e.Leistungsregelung_Solarinsel: Ladeleistung > 0 2023-09-04 08:33:03.931 - warn: javascript.0 (3026558) getState "mihome.0.devices.magnet_158d0001ab40f1.percent" not found (3) states[id]=null 2023-09-04 08:33:03.931 - warn: javascript.0 (3026558) at Object.<anonymous> (script.js.common.Haussteuerung_Überwachnung.Batterieüberwachung:11:20) 2023-09-04 08:33:03.931 - warn: javascript.0 (3026558) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1266:38) 2023-09-04 08:33:03.931 - warn: javascript.0 (3026558) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:645:29) 2023-09-04 08:33:03.931 - warn: javascript.0 (3026558) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.ts:11178:62) 2023-09-04 08:33:03.931 - warn: javascript.0 (3026558) at processImmediate (node:internal/timers:476:21) 2023-09-04 08:33:06.411 - error: sainlogic.0 (5113) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-04 08:33:07.945 - info: javascript.0 (3026558) script.js.common.Stromkosten.Solarinsel_Zellendifferenz: Mittelwert Liste: 36.8 2023-09-04 08:33:09.404 - info: javascript.0 (3026558) script.js.common.Fenster.Garagensteuerung_ESP: 55.7 2023-09-04 08:33:19.421 - info: javascript.0 (3026558) script.js.common.Fenster.Garagensteuerung_ESP: 56.1 2023-09-04 08:33:21.371 - error: sainlogic.0 (5113) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-04 08:33:22.612 - info: javascript.0 (3026558) script.js.common.Sonstiges.KatzenHeizdecke: 1 2023-09-04 08:33:22.612 - info: javascript.0 (3026558) script.js.common.Sonstiges.KatzenHeizdecke: undefined 2023-09-04 08:33:29.442 - info: javascript.0 (3026558) script.js.common.Fenster.Garagensteuerung_ESP: 56 2023-09-04 08:33:32.639 - info: javascript.0 (3026558) script.js.common.Sonstiges.KatzenHeizdecke: -1 2023-09-04 08:33:32.639 - info: javascript.0 (3026558) script.js.common.Sonstiges.KatzenHeizdecke: undefined 2023-09-04 08:33:36.411 - error: sainlogic.0 (5113) Connection error on 192.168.66.10:45000: Error: connect EHOSTUNREACH 192.168.66.10:45000 2023-09-04 08:33:39.411 - info: javascript.0 (3026558) script.js.common.Fenster.Garagensteuerung_ESP: 56.1============ Mark until here for C&P =============
-
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
Temp directories causing npm8 problem: 1
Some problems detected, please run iob fixMoin,
bin zwar nicht auf dem Laufenden, bezüglich des Problems, aber ich sehe da auf die Schnelle im Log
Temp directories causing npm8 problem: 1 Some problems detected, please run iob fixUnd, das
journalist recht groß, kann aber auch daran liegen, dass da seit Aufsetzen des LXC Containers nichts aufgeräumt wurde/wird/var: 5.8G /var/ 3.7G /var/log/journal/c01d62f951a24586b96d69a8f9b64825 3.7G /var/log/journal 3.7G /var/logDu kannst da mal schauen, wer da was hineinschreibt
# sudo journalctl -f oder # sudo journalctl -n 1000VG
Bernd -
@caravandriver sagte in iobroker kaum benutzbar - redis 100%:
Aber: Auf dem Master ist die Performance dank redis immernoch unterirdisch.
woher weisst du das?
ohne Redis wäre sie wahrscheinlich noch viel grausamer -
@homoran mag sein, aber mir geht es darum, dass redis so viel Auslastung macht und wie man das Problem löst. Hast du etwas beizutragen?
@dp20eic iob fix habe ich schon einige male hinter mir... journal habe ich bereinigt und einen Cronjob gemacht, damit alles älter als 7 Tage rausfliegt.
