Noch ein Zigbee Problem....
-
@dp20eic
zigbee jetzt auf alle Fälle grün
-
@thomas-braun
das bullseye update mache ich dann gleich. -
@brokeling sagte in Noch ein Zigbee Problem....:
ioBroker-Repositories
Moin,
@brokeling sagte in Noch ein Zigbee Problem....:
Und was ist mit dem js-controller: 5.0.11?
Ist der nicht stable?Moin,
laut
iob diagbist Du im Beta Universum vomioBrokerunterwegsioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): betaVG
Bernd -
@dp20eic
wie komme ich da wieder raus und nicht wieder hinein? -
@brokeling sagte in Noch ein Zigbee Problem....:
wie komme ich da wieder raus und nicht wieder hinein?
Du meinst den Beta-Bereich?
iob repo unset beta iob repo set stable iob update -
@thomas-braun
ok danke.
Aber jetzt komme ich am update zum bullseye.
Alles gemacht, aber ich komme jetzt in die admin Oberfläche nicht rein.
auchiobroker start adminbringt nichts
-
-
======== Start marking the full check here ========= Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : armv7l Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 16:42:38 up 3 min, 1 user, load average: 7.83, 3.25, 1.25 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=68.6'C volt=0.8375V *** Time and Time Zones *** Local time: Thu 2023-08-17 16:42:39 CEST Universal time: Thu 2023-08-17 14:42:39 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.9G 1.1G 0.0K 778M 1.8G Swap: 99M 0B 99M Total: 3.9G 1.9G 1.2G 3786 M total memory 1875 M used memory 240 M active memory 2294 M inactive memory 1132 M free memory 73 M buffer memory 704 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 18G 94G 16% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 758M 864K 757M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sdb1 ext4 113G 71G 37G 66% /backup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 379M 16K 379M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Aug 17 16:38:50 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:40:0F:7D vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Aug 17 16:38:52 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Thu Aug 17 16:38:52 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Aug 17 16:38:54 2023] EXT4-fs (sda2): re-mounted. Opts: (null) [Thu Aug 17 16:38:56 2023] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 |-/backup /dev/sdb1 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 5.9G /var/ 3.4G /var/cache/apt 3.4G /var/cache 3.3G /var/cache/apt/archives 2.4G /var/lib Archived and active journals take up 40.0M in the file system. /opt/iobroker/backups: 2.9G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.1G /opt/iobroker/iobroker-data/ 541M /opt/iobroker/iobroker-data/backup-objects 383M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 41M /opt/iobroker/iobroker-data/states.json.old 41M /opt/iobroker/iobroker-data/states.json.bak 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 31M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 16.20.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 14.21.3-deb-1nodesource1 500 500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages 12.22.12-deb-1nodesource1 500 500 https://deb.nodesource.com/node_12.x bullseye/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 5.0.11 admin: 6.7.2 javascript: 7.1.4 Adapters from github: 3 Adapter State system.adapter.admin.1 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspi - enabled + system.adapter.backitup.0 : backitup : raspi - enabled + system.adapter.chromecast.0 : chromecast : raspi - enabled + system.adapter.cloud.0 : cloud : raspi - enabled system.adapter.deconz.0 : deconz : raspi - disabled, port: 80 system.adapter.devices.0 : devices : raspi - enabled + system.adapter.discovery.0 : discovery : raspi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspi - disabled system.adapter.feiertage.0 : feiertage : raspi - enabled system.adapter.flot.0 : flot : raspi - enabled system.adapter.fritzdect.0 : fritzdect : raspi - disabled system.adapter.hue-extended.0 : hue-extended : raspi - disabled system.adapter.hue.0 : hue : raspi - disabled, port: 443 system.adapter.ical.0 : ical : raspi - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspi - enabled system.adapter.iqontrol.0 : iqontrol : raspi - disabled + system.adapter.javascript.0 : javascript : raspi - enabled system.adapter.luftdaten.0 : luftdaten : raspi - enabled system.adapter.luftdaten.1 : luftdaten : raspi - enabled system.adapter.mqtt.0 : mqtt : raspi - disabled, port: 1884, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : raspi - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : raspi - enabled + system.adapter.nuki.0 : nuki : raspi - enabled + system.adapter.onvif.0 : onvif : raspi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : raspi - enabled + system.adapter.pushover.0 : pushover : raspi - enabled + system.adapter.reolink.0 : reolink : raspi - enabled + system.adapter.reolink.1 : reolink : raspi - enabled + system.adapter.reolink.2 : reolink : raspi - enabled + system.adapter.reolink.3 : reolink : raspi - enabled + system.adapter.reolink.4 : reolink : raspi - enabled system.adapter.samsung_tizen.0 : samsung_tizen : raspi - enabled, port: 8002 + system.adapter.sayit.0 : sayit : raspi - enabled + system.adapter.sayit.1 : sayit : raspi - enabled + system.adapter.sayit.2 : sayit : raspi - enabled + system.adapter.sayit.3 : sayit : raspi - enabled + system.adapter.sayit.4 : sayit : raspi - enabled + system.adapter.sayit.5 : sayit : raspi - enabled + system.adapter.shelly.0 : shelly : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspi - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartcontrol.0 : smartcontrol : raspi - disabled + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspi - enabled + system.adapter.spotify-premium.0 : spotify-premium : raspi - enabled + system.adapter.sql.0 : sql : raspi - enabled, port: 0 system.adapter.statistics.0 : statistics : raspi - enabled + system.adapter.telegram.0 : telegram : raspi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : raspi - enabled system.adapter.vis-history.0 : vis-history : raspi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspi - enabled system.adapter.vis-justgage.0 : vis-justgage : raspi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspi - enabled system.adapter.vis-metro.0 : vis-metro : raspi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - enabled system.adapter.vis.0 : vis : raspi - enabled + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspi - enabled + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if00 + instance is alive Enabled adapters with bindings system.adapter.admin.1 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.onvif.0 : onvif : raspi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.samsung_tizen.0 : samsung_tizen : raspi - enabled, port: 8002 + system.adapter.shelly.0 : shelly : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspi - enabled, port: 0 + system.adapter.telegram.0 : telegram : raspi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.8.2 , installed 6.7.2 [Updatable] Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "backitup" : 2.7.0 , installed 2.6.23 [Updatable] Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "countdown" : 2.1.0 , installed 2.0.1 [Updatable] Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "digitalstrom" : 2.3.0 , installed 2.3.0 Adapter "discovery" : 3.2.0 , installed 3.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "hue" : 3.9.6 , installed 3.9.3 [Updatable] Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iqontrol" : 2.3.0 , installed 2.2.0 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.11 , installed 5.0.11 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "moma" : 1.2.9 , installed 1.2.9 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mydlink" : 1.3.2 , installed 1.3.2 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "octoprint" : 5.0.1 , installed 5.0.1 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "owntracks" : 1.0.5 , installed 1.0.5 Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "ph803w" : 1.1.1 , installed 1.1.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.4 , installed 3.0.4 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 1.3.2 , installed 1.3.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.7 , installed 2.5.7 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "spotify-premium": 1.2.2 , installed 1.2.2 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wiobrowser" : 2.0.1 , installed 2.0.1 Adapter "ws" : 2.5.3 , installed 2.5.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 17061 States: 12802 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_12.x bullseye InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 119 15505 393/motion tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 13397 376/deCONZ tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 119 15504 393/motion tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15448 544/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15509 529/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 20690 2004/io.sonoff.0 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 15588 376/deCONZ tcp 0 0 192.168.178.53:9092 0.0.0.0:* LISTEN 1001 23103 2718/io.nuki.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 13587 602/iobroker.js-con tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 110 13451 618/mariadbd tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 118 14601 532/redis-server 12 tcp6 0 0 :::8082 :::* LISTEN 1001 21194 2452/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 15450 544/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 31661 3739/io.simple-api. tcp6 0 0 ::1:631 :::* LISTEN 0 15508 529/cupsd tcp6 0 0 ::1:6379 :::* LISTEN 118 14602 532/redis-server 12 udp 0 0 0.0.0.0:51718 0.0.0.0:* 108 13333 369/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21832 2408/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14733 988/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 10205 642/cups-browsed udp 0 0 0.0.0.0:55934 0.0.0.0:* 1001 48081 2408/io.shelly.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 18145 2194/io.chromecast. udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13331 369/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 14732 376/deCONZ udp6 0 0 :::546 :::* 0 14885 988/dhcpcd udp6 0 0 :::60506 :::* 108 13334 369/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13332 369/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-08-17 16:42:28.713 - info: onvif.0 (3793) Found Adapter Device: onvif.0.192_168_178_119_8000 Manufacturer IPC_523128M5MP 192.168.178.119:8000 2023-08-17 16:42:31.896 - error: onvif.0 (3793) Data: null XML: undefined 2023-08-17 16:42:31.896 - error: onvif.0 (3793) Error initializing device: Error: connect EHOSTUNREACH 192.168.178.119:8000 device: {"id":"192_168_178_119_8000","name":"Manufacturer IPC_523128M5MP 192.168.178.119:8000","ip":"192.168.178.119","port":"8000","hostname":"192.168.178.119","user":"admin","password":"fCmqvxM4ZCJMY7Tpv51SSlsso","snapshotUrl":"http://192.168.178.119:80/cgi-bin/api.cgi?cmd=onvifSnapPic&channel=0","majorStreamUrl":"rtsp://admin:fCmqvxM4ZCJMY7Tpv51SSlsso@192.168.178.119:554/","minorStreamUrl":"rtsp://admin:fCmqvxM4ZCJMY7Tpv51SSlsso@192.168.178.119:554/h264Preview_01_sub"} 2023-08-17 16:42:31.897 - error: onvif.0 (3793) You can change user and password under object and edit device or delete device under objects and restart adapter 2023-08-17 16:42:31.897 - error: onvif.0 (3793) Error: connect EHOSTUNREACH 192.168.178.119:8000 at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1495:16) 2023-08-17 16:42:31.898 - info: onvif.0 (3793) Found Adapter Device: onvif.0.192_168_178_127_8000 ManufacturerE1 Outdoor 192.168.178.127:8000 2023-08-17 16:42:33.300 - info: onvif.0 (3793) Device successful initialized: 192.168.178.127:8000 2023-08-17 16:42:34.075 - info: sourceanalytix.0 (3641) Initialization of 0_userdata.0.Holger2.Energie_Haus.SolarErzeugung successfully 2023-08-17 16:42:34.076 - info: sourceanalytix.0 (3641) Initialising (7 of 7) "0_userdata.0.Holger2.Energie_Haus.Strombezug_STAWA" 2023-08-17 16:42:37.306 - info: onvif.0 (3793) Start onvif discovery 2023-08-17 16:42:37.331 - warn: onvif.0 (3793) Used invalid characters: onvif.0.192_168_178_127_8000.infos.presets.Geländer changed to onvif.0.192_168_178_127_8000.infos.presets.GelÃ_nder 2023-08-17 16:42:37.382 - info: onvif.0 (3793) Discovery Reply from 192.168.178.127 (name,IPC) (E1Outdoor) (http://192.168.178.127:8000/onvif/device_service) (urn:uuid:2419d68a-2dd2-21b2-a205-c4:3c:b0:9c:12:34) 2023-08-17 16:42:37.383 - info: onvif.0 (3793) Skip device 192.168.178.127 because it is already configured via iobroker object. Delete the device under objects for reconfigure. 2023-08-17 16:42:37.457 - info: onvif.0 (3793) Discovery Reply from 192.168.178.128 (name,IPC) (E1Outdoor) (http://192.168.178.128:8000/onvif/device_service) (urn:uuid:2419d68a-2dd2-21b2-a205-68:39:43:f8:6c:69) 2023-08-17 16:42:37.457 - info: onvif.0 (3793) Skip device 192.168.178.128 because it is already configured via iobroker object. Delete the device under objects for reconfigure. 2023-08-17 16:42:37.475 - info: onvif.0 (3793) Discovery Reply from 192.168.178.132 (name,IPC) (E1Outdoor) (http://192.168.178.132:8000/onvif/device_service) (urn:uuid:2419d68a-2dd2-21b2-a205-5c:c3:36:2e:0e:73) 2023-08-17 16:42:37.476 - info: onvif.0 (3793) Skip device 192.168.178.132 because it is already configured via iobroker object. Delete the device under objects for reconfigure. 2023-08-17 16:42:37.535 - warn: onvif.0 (3793) State "onvif.0.192_168_178_127_8000.infos.presets.Geländer" has no existing object, this might lead to an error in future versions 2023-08-17 16:42:42.316 - info: onvif.0 (3793) Finished onvif discovery 2023-08-17 16:42:51.240 - info: sourceanalytix.0 (3641) Initialization of 0_userdata.0.Holger2.Energie_Haus.Strombezug_STAWA successfully 2023-08-17 16:42:51.283 - warn: sourceanalytix.0 (3641) Cannot handle calculations for 1 of 7 enabled states, check error messages 2023-08-17 16:42:51.303 - info: sourceanalytix.0 (3641) Successfully activated SourceAnalytix for 6 of 7 states, will do my Job until you stop me! 2023-08-17 16:44:03.228 - info: javascript.0 (910) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 16:44:25.874 - info: javascript.0 (910) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink ============ Mark until here for C&P ============= iob diag has finished. -
@brokeling sagte in Noch ein Zigbee Problem....:
js-controller: js-controller: 5.0.11
admin: 6.7.2
javascript: 7.1.4
jetzt sogar überall Betauser
@brokeling sagte in Noch ein Zigbee Problem....:
load average: 7.83, 3.25, 1.25
Hammer... über 7 sieht man selten
@brokeling sagte in Noch ein Zigbee Problem....:
temp=68.6'C
grenzwertig
@brokeling sagte in Noch ein Zigbee Problem....:
volt=0.8375V
hm...
Objects type: jsonl States type: redis*** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_12.x bullseye InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease2023-08-17 16:42:31.897 - error: onvif.0 (3793) Error: connect EHOSTUNREACH 192.168.178.119:8000 -
-
@djmarc75 sagte in Noch ein Zigbee Problem....:
Hammer... über 7 sieht man selten
Systemstart und dann Motion mit mehreren Kameras aktiv kann schonmal für so eine Auslastung sorgen.
-
pi@raspi:~ $ iob start admin.1iobroker läuft aber ich komme noch nicht auf die Oberfläche.
Wie kann ich das logfile ohne die Oberfläche auslesen? -
iob logs --watch | uniq -
@brokeling said in Noch ein Zigbee Problem....:
pi@raspi:~ $ iob start admin.1iobroker läuft aber ich komme noch nicht auf die Oberfläche.
Wie kann ich das logfile ohne die Oberfläche auslesen?das wird zu viel. Wie kann man das loglevel von info auf warning stellen?
-
-
@brokeling sagte in Noch ein Zigbee Problem....:
Wie kann man das loglevel von info auf warning stellen?
Du als Betauser müsstest das doch wissen
-
@djmarc75
ja schon aber ohne admin Oberfläche... -
@brokeling sagte in Noch ein Zigbee Problem....:
ohne admin Oberfläche
keine Ahnung da ich mein System noch nie so verbogen hab
-
also ich weiß jetzt nicht was ich aus dem log rauskopieren soll.
Alles ist zu lang....am Anfang kommen zudem Hieroglyphen...2023-08-17 17:44:37.750 - info: host.raspi instance system.adapter.samsung_tizen.0 started with pid 6653 2023-08-17 17:44:38.377 - error: host.raspi Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-17 17:44:38.378 - error: host.raspi Caught by controller[0]: throw err; 2023-08-17 17:44:38.378 - error: host.raspi Caught by controller[0]: ^ 2023-08-17 17:44:38.378 - error: host.raspi Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js' 2023-08-17 17:44:38.379 - error: host.raspi Caught by controller[0]: Require stack: 2023-08-17 17:44:38.379 - error: host.raspi Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js 2023-08-17 17:44:38.379 - error: host.raspi Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.samsung_tizen/main.js 2023-08-17 17:44:38.380 - error: host.raspi Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-17 17:44:38.380 - error: host.raspi Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-17 17:44:38.380 - error: host.raspi Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-17 17:44:38.380 - error: host.raspi Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-17 17:44:38.381 - error: host.raspi Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js:46:25) 2023-08-17 17:44:38.381 - error: host.raspi Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-17 17:44:38.381 - error: host.raspi Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-17 17:44:38.381 - error: host.raspi Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-17 17:44:38.382 - error: host.raspi Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-17 17:44:38.382 - error: host.raspi Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-17 17:44:38.383 - error: host.raspi Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-17 17:44:38.383 - error: host.raspi Caught by controller[0]: requireStack: [ 2023-08-17 17:44:38.384 - error: host.raspi Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js', 2023-08-17 17:44:38.384 - error: host.raspi Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.samsung_tizen/main.js' 2023-08-17 17:44:38.384 - error: host.raspi Caught by controller[0]: ] 2023-08-17 17:44:38.385 - error: host.raspi Caught by controller[0]: } 2023-08-17 17:44:38.385 - error: host.raspi Caught by controller[0]: Node.js v18.17.1 2023-08-17 17:44:38.385 - error: host.raspi instance system.adapter.samsung_tizen.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2023-08-17 17:44:38.386 - info: host.raspi Adapter system.adapter.samsung_tizen.0 needs rebuild of iobroker.js-controller and will be restarted afterwards. 2023-08-17 17:44:38.387 - info: host.raspi system.adapter.samsung_tizen.0 will be rebuilt (Args: {"path":"/opt/iobroker/node_modules","module":"iobroker.js-controller","version":"5.0.11"}) 2023-08-17 17:44:38.388 - warn: host.raspi adapter "samsung_tizen" seems to be installed for a different version of Node.js. Trying to rebuild it... 2 attempt 2023-08-17 17:44:38.389 - info: host.raspi iobroker rebuild iobroker.js-controller@5.0.11 --path /opt/iobroker/node_modules 2023-08-17 17:44:40.582 - info: host.raspi iobroker npm-rebuild: Rebuilding native module "iobroker.js-controller@5.0.11" in /opt/iobroker/node_modules ... 2023-08-17 17:44:58.925 - info: sql.0 (1910) Do not store value "NULL" for PM10 Outdoor because no number 2023-08-17 17:44:58.934 - info: sql.0 (1910) Do not store value "NULL" for PM25 Outdoor because no number 2023-08-17 17:44:58.940 - info: sql.0 (1910) Do not store value "NULL" for DevPointLueftung because no number 2023-08-17 17:45:00.117 - info: host.raspi instance system.adapter.netatmo-crawler.0 started with pid 6954 2023-08-17 17:45:04.184 - info: host.raspi instance system.adapter.luftdaten.1 started with pid 6989 2023-08-17 17:45:04.489 - info: netatmo-crawler.0 (6954) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.17.1, js-controller: 5.0.11 2023-08-17 17:45:04.584 - info: netatmo-crawler.0 (6954) Getting data for stationid:70:ee:50:29:08:fe 2023-08-17 17:45:05.918 - info: netatmo-crawler.0 (6954) Getting data for stationid:70:ee:50:3f:34:04 2023-08-17 17:45:07.176 - info: netatmo-crawler.0 (6954) Getting data for stationid:70:ee:50:52:e9:96 2023-08-17 17:45:08.147 - info: netatmo-crawler.0 (6954) Getting data for stationid:70:ee:50:05:53:68 2023-08-17 17:45:08.236 - info: host.raspi instance system.adapter.luftdaten.0 started with pid 7028 2023-08-17 17:45:08.728 - info: luftdaten.1 (6989) starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.17.1, js-controller: 5.0.11 2023-08-17 17:45:09.492 - info: netatmo-crawler.0 (6954) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-08-17 17:45:10.042 - info: host.raspi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-17 17:45:12.552 - info: luftdaten.1 (6989) Terminated (NO_ERROR): Without reason 2023-08-17 17:45:13.009 - info: luftdaten.0 (7028) starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.17.1, js-controller: 5.0.11 2023-08-17 17:45:13.094 - info: host.raspi instance system.adapter.luftdaten.1 terminated with code 0 (NO_ERROR) 2023-08-17 17:45:13.386 - info: luftdaten.0 (7028) Terminated (NO_ERROR): Without reason 2023-08-17 17:45:14.227 - info: host.raspi instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-08-17 17:45:18.766 - info: host.raspi iobroker npm-rebuild: rebuilt dependencies successfully 2023-08-17 17:45:18.810 - info: host.raspi iobroker npm-rebuild: 2023-08-17 17:45:18.810 - info: host.raspi iobroker npm-rebuild: Rebuilding native modules done 2023-08-17 17:45:19.824 - info: host.raspi iobroker npm-rebuild: exit 0 2023-08-17 17:45:19.896 - info: host.raspi instance system.adapter.samsung_tizen.0 started with pid 7192 2023-08-17 17:45:20.527 - error: host.raspi Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-17 17:45:20.527 - error: host.raspi Caught by controller[0]: throw err; 2023-08-17 17:45:20.527 - error: host.raspi Caught by controller[0]: ^ 2023-08-17 17:45:20.528 - error: host.raspi Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js' 2023-08-17 17:45:20.528 - error: host.raspi Caught by controller[0]: Require stack: 2023-08-17 17:45:20.528 - error: host.raspi Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js 2023-08-17 17:45:20.529 - error: host.raspi Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.samsung_tizen/main.js 2023-08-17 17:45:20.529 - error: host.raspi Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-17 17:45:20.529 - error: host.raspi Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-17 17:45:20.529 - error: host.raspi Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-17 17:45:20.530 - error: host.raspi Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-17 17:45:20.530 - error: host.raspi Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js:46:25) 2023-08-17 17:45:20.530 - error: host.raspi Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-17 17:45:20.530 - error: host.raspi Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-17 17:45:20.530 - error: host.raspi Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-17 17:45:20.531 - error: host.raspi Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-17 17:45:20.531 - error: host.raspi Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-17 17:45:20.531 - error: host.raspi Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-17 17:45:20.531 - error: host.raspi Caught by controller[0]: requireStack: [ 2023-08-17 17:45:20.532 - error: host.raspi Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js', 2023-08-17 17:45:20.532 - error: host.raspi Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.samsung_tizen/main.js' 2023-08-17 17:45:20.532 - error: host.raspi Caught by controller[0]: ] 2023-08-17 17:45:20.532 - error: host.raspi Caught by controller[0]: } 2023-08-17 17:45:20.533 - error: host.raspi Caught by controller[0]: Node.js v18.17.1 2023-08-17 17:45:20.533 - error: host.raspi instance system.adapter.samsung_tizen.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2023-08-17 17:45:20.533 - info: host.raspi Adapter system.adapter.samsung_tizen.0 needs rebuild and will be restarted afterwards. 2023-08-17 17:45:20.534 - info: host.raspi system.adapter.samsung_tizen.0 will be rebuilt 2023-08-17 17:45:20.534 - warn: host.raspi adapter "samsung_tizen" seems to be installed for a different version of Node.js. Trying to rebuild it... 3 attempt 2023-08-17 17:45:20.535 - info: host.raspi iobroker rebuild 2023-08-17 17:45:22.718 - info: host.raspi iobroker npm-rebuild: Rebuilding native modules ... 2023-08-17 17:45:46.339 - info: javascript.0 (1204) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 17:45:46.791 - info: vis.0 (7554) starting. Version 1.4.16 in /opt/iobroker/node_modules/iobroker.vis, node: v18.17.1, js-controller: 5.0.11 2023-08-17 17:45:47.213 - info: vis.0 (7554) vis license is OK. 2023-08-17 17:45:48.048 - info: sayit.0 (7533) starting. Version 3.0.5 in /opt/iobroker/node_modules/iobroker.sayit, node: v18.17.1, js-controller: 5.0.11 2023-08-17 17:45:48.066 - info: sayit.0 (7533) Install process. Upload files and stop. 2023-08-17 17:45:48.069 - info: sayit.0 (7533) Upload announce mp3 files 2023-08-17 17:45:48.295 - info: sayit.0 (7533) stopping... 2023-08-17 17:45:48.303 - info: sayit.0 (7533) terminating 2023-08-17 17:45:48.308 - info: sayit.0 (7533) Terminated (NO_ERROR): Without reason 2023-08-17 17:45:48.847 - info: sayit.0 (7533) terminating 2023-08-17 17:45:48.893 - info: sayit.0 (7533) stopping... 2023-08-17 17:45:49.571 - info: vis.0 (7554) Terminated (NO_ERROR): Without reason 2023-08-17 17:45:52.969 - info: vis-google-fonts.0 (7725) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.vis-google-fonts, node: v18.17.1, js-controller: 5.0.11 2023-08-17 17:45:53.694 - info: vis-google-fonts.0 (7725) Terminated (NO_ERROR): Without reason 2023-08-17 17:47:33.102 - info: host.raspi iobroker npm-rebuild: rebuilt dependencies successfully 2023-08-17 17:47:33.150 - info: host.raspi iobroker npm-rebuild: 2023-08-17 17:47:33.151 - info: host.raspi iobroker npm-rebuild: Rebuilding native modules done 2023-08-17 17:47:34.165 - info: host.raspi iobroker npm-rebuild: exit 0 2023-08-17 17:47:34.223 - info: host.raspi instance system.adapter.samsung_tizen.0 started with pid 9608 2023-08-17 17:47:34.965 - error: host.raspi Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-17 17:47:34.966 - error: host.raspi Caught by controller[0]: throw err; 2023-08-17 17:47:34.966 - error: host.raspi Caught by controller[0]: ^ 2023-08-17 17:47:34.966 - error: host.raspi Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js' 2023-08-17 17:47:34.967 - error: host.raspi Caught by controller[0]: Require stack: 2023-08-17 17:47:34.967 - error: host.raspi Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js 2023-08-17 17:47:34.967 - error: host.raspi Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.samsung_tizen/main.js 2023-08-17 17:47:34.968 - error: host.raspi Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-17 17:47:34.968 - error: host.raspi Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-17 17:47:34.968 - error: host.raspi Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-17 17:47:34.968 - error: host.raspi Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-17 17:47:34.968 - error: host.raspi Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js:46:25) 2023-08-17 17:47:34.969 - error: host.raspi Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-17 17:47:34.969 - error: host.raspi Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-17 17:47:34.969 - error: host.raspi Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-17 17:47:34.969 - error: host.raspi Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-17 17:47:34.989 - error: host.raspi Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-17 17:47:34.989 - error: host.raspi Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-17 17:47:34.990 - error: host.raspi Caught by controller[0]: requireStack: [ 2023-08-17 17:47:34.990 - error: host.raspi Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.samsung_tizen/lib/utils.js', 2023-08-17 17:47:34.990 - error: host.raspi Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.samsung_tizen/main.js' 2023-08-17 17:47:34.990 - error: host.raspi Caught by controller[0]: ] 2023-08-17 17:47:34.990 - error: host.raspi Caught by controller[0]: } 2023-08-17 17:47:34.990 - error: host.raspi Caught by controller[0]: Node.js v18.17.1 2023-08-17 17:47:34.991 - error: host.raspi instance system.adapter.samsung_tizen.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2023-08-17 17:47:34.991 - info: host.raspi Rebuild for adapter system.adapter.samsung_tizen.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually. 2023-08-17 17:47:58.747 - info: javascript.0 (1204) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 17:48:32.275 - info: javascript.0 (1204) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 17:48:36.374 - info: javascript.0 (1204) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 17:49:58.535 - error: sql.0 (1910) Cannot insert INSERT INTO `iobroker`.ts_bool (id, ts, val, ack, _from, q) VALUES (undefined, 1692286783814, NULL, 1, 1, 64),(undefined, 1692286783818, true, 1, 1, 0);: Error: Unknown column 'undefined' in 'field list' (id: reolink.0.network.connected) 2023-08-17 17:49:58.537 - error: sql.0 (1910) Cannot insert INSERT INTO `iobroker`.ts_bool (id, ts, val, ack, _from, q) VALUES (undefined, 1692286783814, NULL, 1, 1, 64),(undefined, 1692286783818, true, 1, 1, 0);: Error: Unknown column 'undefined' in 'field list' (id: reolink.1.network.connected) 2023-08-17 17:49:58.539 - error: sql.0 (1910) Cannot insert INSERT INTO `iobroker`.ts_bool (id, ts, val, ack, _from, q) VALUES (undefined, 1692286783814, NULL, 1, 1, 64),(undefined, 1692286783818, true, 1, 1, 0);: Error: Unknown column 'undefined' in 'field list' (id: reolink.2.network.connected) 2023-08-17 17:49:58.540 - error: sql.0 (1910) Cannot insert INSERT INTO `iobroker`.ts_bool (id, ts, val, ack, _from, q) VALUES (undefined, 1692286783814, NULL, 1, 1, 64),(undefined, 1692286783818, true, 1, 1, 0);: Error: Unknown column 'undefined' in 'field list' (id: reolink.3.network.connected) 2023-08-17 17:49:58.929 - info: sql.0 (1910) Do not store value "NULL" for HumAußen because no number 2023-08-17 17:49:58.933 - info: sql.0 (1910) D -
iob logs --watch | uniqeinfach nur die neu hinzukommenden Zeilen beobachten. Kann ja nicht so viel sein. Oder knallt dir da irgendwas anderes im Sekundentakt Meldungen rein? Dann den Adapter stoppen.
