Noch ein Zigbee Problem....

DJMarc75

So auf die Schnelle:

@brokeling sagte in Noch ein Zigbee Problem....:

Raspbian GNU/Linux 10 (buster)

alt

@brokeling sagte in Noch ein Zigbee Problem....:

load average: 4.56, 4.04, 1.85

Da läuft was aus dem Ruder

@brokeling sagte in Noch ein Zigbee Problem....:

volt=0.8375V

Original Netzteil ?

@brokeling sagte in Noch ein Zigbee Problem....:

js-controller: 5.0.11

Warum ? Da kann es noch Problemchen geben.

@brokeling sagte in Noch ein Zigbee Problem....:

Pending Updates: 8

mal updaten

? Offline

@brokeling sagte in Noch ein Zigbee Problem....:

Adapter Neustart mit senetry aus, folgende logs:

Moin,

ist das korrekt, bei Dir,

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00

was kommt, wenn Du, ein ls auf das Verzeichnis machst?

ls -la /dev/serial/by-id/

Bei mir sieht das so aus

# ls -la /dev/serial/by-id/
total 0
lrwxrwxrwx 1 root root  13 Aug 17 10:46 usb-Texas_Instruments_XDS110__03.00.00.12__Embed_with_CMSIS-DAP_L1100FRC-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root  13 Aug 17 10:46 usb-Texas_Instruments_XDS110__03.00.00.12__Embed_with_CMSIS-DAP_L1100FRC-if03 -> ../../ttyACM1

VG
Bernd

brokeling

@djmarc75

na, ich mach doch immer schön brav die updates

sudo apt update
sudo apt dist-upgrade

warum ist dann nicht die neueste Version drauf?

Dann Netzteil: Da habt ihr mich wieder. Ich hatte es umgesteckt auf eine USV.
Ich habe es SOFORT wieder zurück auf das ORIGINAL.

Und was ist mit dem js-controller: 5.0.11?
Ist der nicht stable?
Hab gerade gesehen, der ist ja noch ganz jung...
Ich führe regelmäßig diese Routine durch:

iobroker stop
iobroker update
iobroker upgrade self
iobroker upgrade
iobroker start

brokeling

@dp20eic

pi@raspi:~ $ ls -la /dev/serial/by-id/
insgesamt 0
drwxr-xr-x 2 root root 80 Aug 17 14:13 .
drwxr-xr-x 4 root root 80 Aug 17 14:13 ..
lrwxrwxrwx 1 root root 13 Aug 17 14:13 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root 13 Aug 17 14:13 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if03 -> ../../ttyACM1
pi@raspi:~ $

Die Zahlen stimmen nicht überein.
Muss ich die im Adapter ändern? 18->26?

DJMarc75

@brokeling sagte in Noch ein Zigbee Problem....:

Ich führe regelmäßig diese Routine durch:

Das führt lediglich dazu dass Du den Host auf Beta upgradest.
Warum auch immer man den Tester spielen will :thinking_face:

Thomas Braun

@brokeling sagte in Noch ein Zigbee Problem....:

warum ist dann nicht die neueste Version drauf?

Weil Ugrades der Distribution nicht so funktionieren.
Da muss man anders herangehen. So z. B.

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

? Offline

@brokeling sagte in Noch ein Zigbee Problem....:

Die Zahlen stimmen nicht überein.
Muss ich die im Adapter ändern? 18->26?

Moin,

genau, es sollte schon so da stehen, wie es auch im Dateisystem steht ;)

VG
Bernd

brokeling

@dp20eic
zigbee jetzt auf alle Fälle grün :+1:

brokeling

@thomas-braun
das bullseye update mache ich dann gleich.

? Offline

@brokeling sagte in Noch ein Zigbee Problem....:

ioBroker-Repositories

Moin,

@brokeling sagte in Noch ein Zigbee Problem....:

Und was ist mit dem js-controller: 5.0.11?
Ist der nicht stable?

Moin,

laut iob diag bist Du im Beta Universum vom ioBroker unterwegs

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

VG
Bernd

brokeling · Und was ist mit dem js-controller: 5.0.11? Ist der nicht stable?

@dp20eic
wie komme ich da wieder raus und nicht wieder hinein?

Thomas Braun

@brokeling sagte in Noch ein Zigbee Problem....:

wie komme ich da wieder raus und nicht wieder hinein?

Du meinst den Beta-Bereich?

iob repo unset beta
iob repo set stable
iob update

brokeling

@thomas-braun
ok danke.
Aber jetzt komme ich am update zum bullseye.
Alles gemacht, aber ich komme jetzt in die admin Oberfläche nicht rein.
auch

iobroker start admin

bringt nichts

Thomas Braun

@brokeling

Wir bist du da jetzt genau unterwegs?

iob diag

anschauen.

brokeling

@thomas-braun


======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.1
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 16:42:38 up 3 min,  1 user,  load average: 7.83, 3.25, 1.25
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=68.6'C
volt=0.8375V

*** Time and Time Zones ***
               Local time: Thu 2023-08-17 16:42:39 CEST
           Universal time: Thu 2023-08-17 14:42:39 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.9G        1.1G        0.0K        778M        1.8G
Swap:            99M          0B         99M
Total:          3.9G        1.9G        1.2G

         3786 M total memory
         1875 M used memory
          240 M active memory
         2294 M inactive memory
         1132 M free memory
           73 M buffer memory
          704 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G   18G   94G  16% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     758M  864K  757M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sdb1      ext4      113G   71G   37G  66% /backup
/dev/sda1      vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     379M   16K  379M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Aug 17 16:38:50 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:40:0F:7D vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Aug 17 16:38:52 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Aug 17 16:38:52 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Thu Aug 17 16:38:54 2023] EXT4-fs (sda2): re-mounted. Opts: (null)
[Thu Aug 17 16:38:56 2023] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

Show mounted filesystems (real ones only):
TARGET    SOURCE    FSTYPE OPTIONS
/         /dev/sda2 ext4   rw,noatime,stripe=8191
|-/backup /dev/sdb1 ext4   rw,noatime
`-/boot   /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
5.9G    /var/
3.4G    /var/cache/apt
3.4G    /var/cache
3.3G    /var/cache/apt/archives
2.4G    /var/lib

Archived and active journals take up 40.0M in the file system.

/opt/iobroker/backups:
2.9G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
541M    /opt/iobroker/iobroker-data/backup-objects
383M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
52M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
41M     /opt/iobroker/iobroker-data/states.json.old
41M     /opt/iobroker/iobroker-data/states.json.bak
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
31M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     16.20.2-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages
     12.22.12-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_12.x bullseye/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: redis

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  5.0.11
admin:          6.7.2
javascript:     7.1.4

Adapters from github:   3

Adapter State
  system.adapter.admin.1                  : admin                 : raspi                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspi                                    -  enabled
+ system.adapter.backitup.0               : backitup              : raspi                                    -  enabled
+ system.adapter.chromecast.0             : chromecast            : raspi                                    -  enabled
+ system.adapter.cloud.0                  : cloud                 : raspi                                    -  enabled
  system.adapter.deconz.0                 : deconz                : raspi                                    - disabled, port: 80
  system.adapter.devices.0                : devices               : raspi                                    -  enabled
+ system.adapter.discovery.0              : discovery             : raspi                                    -  enabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspi                                    - disabled
  system.adapter.feiertage.0              : feiertage             : raspi                                    -  enabled
  system.adapter.flot.0                   : flot                  : raspi                                    -  enabled
  system.adapter.fritzdect.0              : fritzdect             : raspi                                    - disabled
  system.adapter.hue-extended.0           : hue-extended          : raspi                                    - disabled
  system.adapter.hue.0                    : hue                   : raspi                                    - disabled, port: 443
  system.adapter.ical.0                   : ical                  : raspi                                    -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : raspi                                    -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspi                                    -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspi                                    -  enabled
  system.adapter.iqontrol.0               : iqontrol              : raspi                                    - disabled
+ system.adapter.javascript.0             : javascript            : raspi                                    -  enabled
  system.adapter.luftdaten.0              : luftdaten             : raspi                                    -  enabled
  system.adapter.luftdaten.1              : luftdaten             : raspi                                    -  enabled
  system.adapter.mqtt.0                   : mqtt                  : raspi                                    - disabled, port: 1884, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : raspi                                    -  enabled
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : raspi                                    -  enabled
+ system.adapter.nuki.0                   : nuki                  : raspi                                    -  enabled
+ system.adapter.onvif.0                  : onvif                 : raspi                                    -  enabled, port: 80, 7575, 8000, 8080, 8081, 8899
+ system.adapter.ping.0                   : ping                  : raspi                                    -  enabled
+ system.adapter.pushover.0               : pushover              : raspi                                    -  enabled
+ system.adapter.reolink.0                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.1                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.2                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.3                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.4                : reolink               : raspi                                    -  enabled
  system.adapter.samsung_tizen.0          : samsung_tizen         : raspi                                    -  enabled, port: 8002
+ system.adapter.sayit.0                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.1                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.2                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.3                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.4                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.5                  : sayit                 : raspi                                    -  enabled
+ system.adapter.shelly.0                 : shelly                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspi                                    -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.smartcontrol.0           : smartcontrol          : raspi                                    - disabled
+ system.adapter.sonoff.0                 : sonoff                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspi                                    -  enabled
+ system.adapter.spotify-premium.0        : spotify-premium       : raspi                                    -  enabled
+ system.adapter.sql.0                    : sql                   : raspi                                    -  enabled, port: 0
  system.adapter.statistics.0             : statistics            : raspi                                    -  enabled
+ system.adapter.telegram.0               : telegram              : raspi                                    -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : raspi                                    - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspi                                    -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspi                                    -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : raspi                                    -  enabled
  system.adapter.vis-history.0            : vis-history           : raspi                                    -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspi                                    -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspi                                    -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspi                                    -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspi                                    -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspi                                    -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspi                                    -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : raspi                                    -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspi                                    -  enabled
  system.adapter.vis.0                    : vis                   : raspi                                    -  enabled
+ system.adapter.web.0                    : web                   : raspi                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspi                                    -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspi                                    -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if00

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.1                  : admin                 : raspi                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.onvif.0                  : onvif                 : raspi                                    -  enabled, port: 80, 7575, 8000, 8080, 8081, 8899
  system.adapter.samsung_tizen.0          : samsung_tizen         : raspi                                    -  enabled, port: 8002
+ system.adapter.shelly.0                 : shelly                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspi                                    -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : raspi                                    -  enabled, port: 0
+ system.adapter.telegram.0               : telegram              : raspi                                    -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspi                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi                                    -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.8.2    , installed 6.7.2  [Updatable]
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "asterisk"     : 1.0.6    , installed 1.0.6
Adapter    "backitup"     : 2.7.0    , installed 2.6.23 [Updatable]
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "countdown"    : 2.1.0    , installed 2.0.1  [Updatable]
Adapter    "deconz"       : 1.3.21   , installed 1.3.21
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "digitalstrom" : 2.3.0    , installed 2.3.0
Adapter    "discovery"    : 3.2.0    , installed 3.2.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "hue"          : 3.9.6    , installed 3.9.3  [Updatable]
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iqontrol"     : 2.3.0    , installed 2.2.0  [Updatable]
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.11   , installed 5.0.11
Adapter    "luftdaten"    : 3.0.0    , installed 3.0.0
Adapter    "moma"         : 1.2.9    , installed 1.2.9
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "mydlink"      : 1.3.2    , installed 1.3.2
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "nuki"         : 1.6.0    , installed 1.6.0
Adapter    "nuki-extended": 2.6.5    , installed 2.6.5
Adapter    "octoprint"    : 5.0.1    , installed 5.0.1
Adapter    "onvif"        : 1.0.5    , installed 1.0.5
Adapter    "owntracks"    : 1.0.5    , installed 1.0.5
Adapter    "paw"          : 0.3.2    , installed 0.3.2
Adapter    "ph803w"       : 1.1.1    , installed 1.1.1
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pushover"     : 3.0.4    , installed 3.0.4
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartcontrol" : 1.3.2    , installed 1.3.2
Adapter    "socketio"     : 6.5.2    , installed 6.5.2
Adapter    "sonoff"       : 2.5.7    , installed 2.5.7
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "spotify-premium": 1.2.2  , installed 1.2.2
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "text2command" : 3.0.2    , installed 3.0.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.96.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.1.0    , installed 6.1.0
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "wiobrowser"   : 2.0.1    , installed 2.0.1
Adapter    "ws"           : 2.5.3    , installed 2.5.3
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        17061
States:         12802

*** OS-Repositories and Updates ***
Hit:1 http://phoscon.de/apt/deconz bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 https://deb.nodesource.com/node_12.x bullseye InRelease
Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease
Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      119        15505      393/motion
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      1000       13397      376/deCONZ
tcp        0      0 127.0.0.1:8081          0.0.0.0:*               LISTEN      119        15504      393/motion
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15448      544/sshd: /usr/sbin
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          15509      529/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       20690      2004/io.sonoff.0
tcp        0      0 0.0.0.0:443             0.0.0.0:*               LISTEN      1000       15588      376/deCONZ
tcp        0      0 192.168.178.53:9092     0.0.0.0:*               LISTEN      1001       23103      2718/io.nuki.0
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       13587      602/iobroker.js-con
tcp        0      0 127.0.0.1:3306          0.0.0.0:*               LISTEN      110        13451      618/mariadbd
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      118        14601      532/redis-server 12
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       21194      2452/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          15450      544/sshd: /usr/sbin
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       31661      3739/io.simple-api.
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          15508      529/cupsd
tcp6       0      0 ::1:6379                :::*                    LISTEN      118        14602      532/redis-server 12
udp        0      0 0.0.0.0:51718           0.0.0.0:*                           108        13333      369/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       21832      2408/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14733      988/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          10205      642/cups-browsed
udp        0      0 0.0.0.0:55934           0.0.0.0:*                           1001       48081      2408/io.shelly.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       18145      2194/io.chromecast.
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13331      369/avahi-daemon: r
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1000       14732      376/deCONZ
udp6       0      0 :::546                  :::*                                0          14885      988/dhcpcd
udp6       0      0 :::60506                :::*                                108        13334      369/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        13332      369/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-17 16:42:28.713  - info: onvif.0 (3793) Found Adapter Device: onvif.0.192_168_178_119_8000 Manufacturer IPC_523128M5MP 192.168.178.119:8000
2023-08-17 16:42:31.896  - error: onvif.0 (3793) Data: null XML: undefined
2023-08-17 16:42:31.896  - error: onvif.0 (3793) Error initializing device: Error: connect EHOSTUNREACH 192.168.178.119:8000 device: {"id":"192_168_178_119_8000","name":"Manufacturer IPC_523128M5MP 192.168.178.119:8000","ip":"192.168.178.119","port":"8000","hostname":"192.168.178.119","user":"admin","password":"fCmqvxM4ZCJMY7Tpv51SSlsso","snapshotUrl":"http://192.168.178.119:80/cgi-bin/api.cgi?cmd=onvifSnapPic&channel=0","majorStreamUrl":"rtsp://admin:fCmqvxM4ZCJMY7Tpv51SSlsso@192.168.178.119:554/","minorStreamUrl":"rtsp://admin:fCmqvxM4ZCJMY7Tpv51SSlsso@192.168.178.119:554/h264Preview_01_sub"}
2023-08-17 16:42:31.897  - error: onvif.0 (3793) You can change user and password under object and edit device or delete device under objects and restart adapter
2023-08-17 16:42:31.897  - error: onvif.0 (3793) Error: connect EHOSTUNREACH 192.168.178.119:8000
    at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1495:16)
2023-08-17 16:42:31.898  - info: onvif.0 (3793) Found Adapter Device: onvif.0.192_168_178_127_8000 ManufacturerE1 Outdoor 192.168.178.127:8000
2023-08-17 16:42:33.300  - info: onvif.0 (3793) Device successful initialized: 192.168.178.127:8000
2023-08-17 16:42:34.075  - info: sourceanalytix.0 (3641) Initialization of 0_userdata.0.Holger2.Energie_Haus.SolarErzeugung successfully
2023-08-17 16:42:34.076  - info: sourceanalytix.0 (3641) Initialising (7 of 7) "0_userdata.0.Holger2.Energie_Haus.Strombezug_STAWA"
2023-08-17 16:42:37.306  - info: onvif.0 (3793) Start onvif discovery
2023-08-17 16:42:37.331  - warn: onvif.0 (3793) Used invalid characters: onvif.0.192_168_178_127_8000.infos.presets.GelÃ¤nder changed to onvif.0.192_168_178_127_8000.infos.presets.GelÃ_nder
2023-08-17 16:42:37.382  - info: onvif.0 (3793) Discovery Reply from 192.168.178.127 (name,IPC) (E1Outdoor) (http://192.168.178.127:8000/onvif/device_service) (urn:uuid:2419d68a-2dd2-21b2-a205-c4:3c:b0:9c:12:34)
2023-08-17 16:42:37.383  - info: onvif.0 (3793) Skip device 192.168.178.127 because it is already configured via iobroker object. Delete the device under objects for reconfigure.
2023-08-17 16:42:37.457  - info: onvif.0 (3793) Discovery Reply from 192.168.178.128 (name,IPC) (E1Outdoor) (http://192.168.178.128:8000/onvif/device_service) (urn:uuid:2419d68a-2dd2-21b2-a205-68:39:43:f8:6c:69)
2023-08-17 16:42:37.457  - info: onvif.0 (3793) Skip device 192.168.178.128 because it is already configured via iobroker object. Delete the device under objects for reconfigure.
2023-08-17 16:42:37.475  - info: onvif.0 (3793) Discovery Reply from 192.168.178.132 (name,IPC) (E1Outdoor) (http://192.168.178.132:8000/onvif/device_service) (urn:uuid:2419d68a-2dd2-21b2-a205-5c:c3:36:2e:0e:73)
2023-08-17 16:42:37.476  - info: onvif.0 (3793) Skip device 192.168.178.132 because it is already configured via iobroker object. Delete the device under objects for reconfigure.
2023-08-17 16:42:37.535  - warn: onvif.0 (3793) State "onvif.0.192_168_178_127_8000.infos.presets.GelÃ¤nder" has no existing object, this might lead to an error in future versions
2023-08-17 16:42:42.316  - info: onvif.0 (3793) Finished onvif discovery
2023-08-17 16:42:51.240  - info: sourceanalytix.0 (3641) Initialization of 0_userdata.0.Holger2.Energie_Haus.Strombezug_STAWA successfully
2023-08-17 16:42:51.283  - warn: sourceanalytix.0 (3641) Cannot handle calculations for 1 of 7 enabled states, check error messages
2023-08-17 16:42:51.303  - info: sourceanalytix.0 (3641) Successfully activated SourceAnalytix for 6 of 7 states, will do my Job until you stop me!
2023-08-17 16:44:03.228  - info: javascript.0 (910) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink
2023-08-17 16:44:25.874  - info: javascript.0 (910) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink


============ Mark until here for C&P =============

iob diag has finished.

DJMarc75

@brokeling sagte in Noch ein Zigbee Problem....:

js-controller: js-controller: 5.0.11

admin: 6.7.2

javascript: 7.1.4

jetzt sogar überall Betauser

@brokeling sagte in Noch ein Zigbee Problem....:

load average: 7.83, 3.25, 1.25

Hammer... über 7 sieht man selten

@brokeling sagte in Noch ein Zigbee Problem....:

temp=68.6'C

grenzwertig

@brokeling sagte in Noch ein Zigbee Problem....:

volt=0.8375V

hm...

Objects type: jsonl
States  type: redis

*** OS-Repositories and Updates ***

Hit:1 http://phoscon.de/apt/deconz bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 https://deb.nodesource.com/node_12.x bullseye InRelease
Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease
Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease

2023-08-17 16:42:31.897  - error: onvif.0 (3793) Error: connect EHOSTUNREACH 192.168.178.119:8000

Thomas Braun

@brokeling

Warum hast du den Beta-Kram nicht ausgeschaltet?

iob start admin.1

sagt was im LogFile?

Thomas Braun · js-controller: js-controller: 5.0.11

@djmarc75 sagte in Noch ein Zigbee Problem....:

Hammer... über 7 sieht man selten

Systemstart und dann Motion mit mehreren Kameras aktiv kann schonmal für so eine Auslastung sorgen.

brokeling

@thomas-braun

pi@raspi:~ $ iob start admin.1

iobroker läuft aber ich komme noch nicht auf die Oberfläche.
Wie kann ich das logfile ohne die Oberfläche auslesen?

Thomas Braun

@brokeling

iob logs --watch | uniq

Community Forum

NEWS

Noch ein Zigbee Problem....

Support us

964

32.4k

81.5k

1.3m