UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

[Thu Aug 8 18:12:52 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Thu Aug 8 18:12:53 2024] EXT4-fs (mmcblk0p2): recovery complete

Dein Dateisystem hängt in den Angeln. Kommt besonders gerne und häufig bei Kisten vor, die nicht ordentlich behandelt werden. Auch bekannt als 'Tod durch plötzlichen Stromentzug'

[Homoran]

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

~ Under-voltage has occurred
~ Arm frequency capping has occurred

was hängt alkes am USB dran?

was für ein Netzteil hast du?

[keineAhnungvonProgrmieren]

@homoran said in Probleme beim Update Host node.js:

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

~ Under-voltage has occurred
~ Arm frequency capping has occurred

was hängt alkes am USB dran?

was für ein Netzteil hast du?

ist alles an der Fritzbox, anschluss via Netzwerk und Stromversorgung via USB von der Fritzbox

[Thomas Braun]

@keineahnungvonprogrmieren

??? Du befeuerst den Raspberry Pi 4 Model B Rev 1.5 über den USB-Anschluss der FritzBox????

[keineAhnungvonProgrmieren]

@thomas-braun said in Probleme beim Update Host node.js:

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

[Thu Aug 8 18:12:52 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Thu Aug 8 18:12:53 2024] EXT4-fs (mmcblk0p2): recovery complete

Dein Dateisystem hängt in den Angeln. Kommt besonders gerne und häufig bei Kisten vor, die nicht ordentlich behandelt werden. Auch bekannt als 'Tod durch plötzlichen Stromentzug'

d.h. ein Netzteil und nicht versorgen via Fritzbox und dann läuft es wieder?
oder was ist die abhilfe?

[Thomas Braun]

@keineahnungvonprogrmieren

Manche Ideen gibt es...
Ja, besorg dir ein stabiles, richtiges Netzteil für den Raspberry. Kein Handyladegerät oder sowas, ein richtiges, ausgewiesenes Netzteil. Am besten gleich das originale.

[keineAhnungvonProgrmieren]

@thomas-braun said in Probleme beim Update Host node.js:

@keineahnungvonprogrmieren

Manche Ideen gibt es...
Ja, besorg dir ein stabiles, richtiges Netzteil für den Raspberry. Kein Handyladegerät oder sowas, ein richtiges, ausgewiesenes Netzteil. Am besten gleich das originale.

ok Netzteil ist bestellt bei Berrybase als offizielles Netzteil mit 3A Leistung.
und die Fehler zb.

Node.js v20.16.0
admin:
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'

kommen also von zuwenig bereitgestelltem Strom?

[Homoran]

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

kommen also von zuwenig bereitgestelltem Strom?

durchaus möglich, wenn die Spannung beim Schreiben von Daten wegbricht und dasurch korrupte Dateien entstehen.

[keineAhnungvonProgrmieren]

@thomas-braun said in Probleme beim Update Host node.js:

@keineahnungvonprogrmieren

Manche Ideen gibt es...
Ja, besorg dir ein stabiles, richtiges Netzteil für den Raspberry. Kein Handyladegerät oder sowas, ein richtiges, ausgewiesenes Netzteil. Am besten gleich das originale.

@thomas-braun said in Probleme beim Update Host node.js:

@keineahnungvonprogrmieren

Manche Ideen gibt es...
Ja, besorg dir ein stabiles, richtiges Netzteil für den Raspberry. Kein Handyladegerät oder sowas, ein richtiges, ausgewiesenes Netzteil. Am besten gleich das originale.

Originales Netzteil ist angeschlossen, scheinbar ohne erfolg.

iob diag

======== Start marking the full check here =========

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: SmartHomeRohlik
         Icon name: computer
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 14:01:53 up 7 min,  1 user,  load average: 0.51, 0.24, 0.10
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2024-08-10 14:01:53 CEST
           Universal time: Sat 2024-08-10 12:01:53 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
SmartHomeRohlik
HOME=/home/SmartHomeRohlik
GROUPS=SmartHomeRohlik adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
js-controller is not running

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G         86M        7.5G        1.0M        193M        7.6G
Swap:            99M          0B         99M
Total:          7.9G         86M        7.6G

Active iob-Instances:   0

         7812 M total memory
           86 M used memory
          141 M active memory
           54 M inactive memory
         7532 M free memory
           33 M buffer memory
          160 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 14:01:53 up 7 min,  1 user,  load average: 0.55, 0.25, 0.11
Tasks: 153 total,   1 running, 152 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.9 sy,  0.0 ni, 97.1 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7812.3 total,   7531.9 free,     86.6 used,    193.8 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   7614.7 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  6.6G   50G  12% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.1M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     782M     0  782M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Aug 10 13:54:13 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:26:C6:E7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=f99eefee-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Aug 10 13:54:14 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Aug 10 13:54:14 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Aug 10 13:54:14 2024] EXT4-fs (mmcblk0p2): recovery complete
[Sat Aug 10 13:54:14 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Aug 10 13:54:14 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Aug 10 13:54:17 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET                       SOURCE         FSTYPE     OPTIONS
/                            /dev/mmcblk0p2 ext4       rw,noatime
|-/dev                       devtmpfs       devtmpfs   rw,relatime,size=3735680k,nr_inodes=933920,mode=755
| |-/dev/shm                 tmpfs          tmpfs      rw,nosuid,nodev
| |-/dev/pts                 devpts         devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| `-/dev/mqueue              mqueue         mqueue     rw,nosuid,nodev,noexec,relatime
|-/proc                      proc           proc       rw,relatime
| `-/proc/sys/fs/binfmt_misc systemd-1      autofs     rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct
|-/sys                       sysfs          sysfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security     securityfs     securityfs rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup           cgroup2        cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore           pstore         pstore     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf              bpf            bpf        rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug        debugfs        debugfs    rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing      tracefs        tracefs    rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections fusectl        fusectl    rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config       configfs       configfs   rw,nosuid,nodev,noexec,relatime
|-/run                       tmpfs          tmpfs      rw,nosuid,nodev,size=1599964k,nr_inodes=819200,mode=755
| |-/run/lock                tmpfs          tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs          sunrpc         rpc_pipefs rw,relatime
| `-/run/user/1000           tmpfs          tmpfs      rw,nosuid,nodev,relatime,size=799980k,nr_inodes=199995,mode=700,uid=1000,gid=1000
`-/boot                      /dev/mmcblk0p1 vfat       rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.4G    /var/
1.9G    /var/log
1.6G    /var/log/journal/9ab67524321c46fcbcc935773dd5bf51
1.6G    /var/log/journal
379M    /var/cache

Archived and active journals take up 1.5G in the file system.

/opt/iobroker/backups:
67M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
646M    /opt/iobroker/iobroker-data/
561M    /opt/iobroker/iobroker-data/files
441M    /opt/iobroker/iobroker-data/files/javascript.admin
409M    /opt/iobroker/iobroker-data/files/javascript.admin/static
408M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
9.0M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js
8.7M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v20.16.0
/usr/bin/node           v20.16.0
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.2


nodejs:
  Installed: 20.16.0-1nodesource1
  Candidate: 20.16.0-1nodesource1
  Version table:
 *** 20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0

Core adapters versions
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
js-controller:
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
admin:
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
javascript:

nodejs modules from github:     0

Adapter State


Enabled adapters with bindings

ioBroker-Repositories
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0

Installed ioBroker-Instances
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15389      540/sshd: /usr/sbin
tcp6       0      0 :::22                   :::*                    LISTEN      0          15391      540/sshd: /usr/sbin
udp        0      0 0.0.0.0:52459           0.0.0.0:*                           108        11249      393/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12667      739/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11247      393/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          12694      739/dhcpcd
udp6       0      0 :::5353                 :::*                                108        11248      393/avahi-daemon: r
udp6       0      0 :::42978                :::*                                108        11250      393/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-08-08 17:05:54.683  - info: shelly.0 (1028) [firmwareUpdate] Auto-Update enabled - devices will be updated automatically
2024-08-08 17:05:54.693  - info: shelly.0 (1028) Starting in CoAP mode. Listening on 0.0.0.0:5683
2024-08-08 17:05:54.752  - info: shelly.1 (1045) starting. Version 7.0.0 in /opt/iobroker/node_modules/iobroker.shelly, node: v20.16.0, js-controller: 6.0.9
2024-08-08 17:05:54.940  - info: shelly.0 (1028) [CoAP Server] Listening for packets in the network
2024-08-08 17:05:55.072  - error: host.SmartHomeRohlik Caught by controller[0]: /opt/iobroker/node_modules/iobroker.rainbird/main.js:33
2024-08-08 17:05:55.073  - error: host.SmartHomeRohlik Caught by controller[0]:         adapter = new utils.Adapter(options);
2024-08-08 17:05:55.073  - error: host.SmartHomeRohlik Caught by controller[0]:                   ^
2024-08-08 17:05:55.074  - error: host.SmartHomeRohlik Caught by controller[0]: TypeError: utils.Adapter is not a constructor
2024-08-08 17:05:55.074  - error: host.SmartHomeRohlik Caught by controller[0]:     at startAdapter (/opt/iobroker/node_modules/iobroker.rainbird/main.js:33:12)
2024-08-08 17:05:55.075  - error: host.SmartHomeRohlik Caught by controller[0]:     at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.rainbird/main.js:319:2)
2024-08-08 17:05:55.075  - error: host.SmartHomeRohlik Caught by controller[0]:     at Module._compile (node:internal/modules/cjs/loader:1358:14)
2024-08-08 17:05:55.076  - error: host.SmartHomeRohlik Caught by controller[0]:     at Module._extensions..js (node:internal/modules/cjs/loader:1416:10)
2024-08-08 17:05:55.076  - error: host.SmartHomeRohlik Caught by controller[0]:     at Module.load (node:internal/modules/cjs/loader:1208:32)
2024-08-08 17:05:55.077  - error: host.SmartHomeRohlik Caught by controller[0]:     at Module._load (node:internal/modules/cjs/loader:1024:12)
2024-08-08 17:05:55.077  - error: host.SmartHomeRohlik Caught by controller[0]:     at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
2024-08-08 17:05:55.078  - error: host.SmartHomeRohlik Caught by controller[0]:     at node:internal/main/run_main_module:28:49
2024-08-08 17:05:55.090  - error: host.SmartHomeRohlik Caught by controller[0]: Node.js v20.16.0
2024-08-08 17:05:55.091  - error: host.SmartHomeRohlik instance system.adapter.rainbird.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-08-08 17:05:55.092  - info: host.SmartHomeRohlik Restart adapter system.adapter.rainbird.0 because enabled
2024-08-08 17:05:56.105  - info: host.SmartHomeRohlik instance system.adapter.modbus.0 in version "6.2.3" started with pid 1112
2024-08-08 17:05:56.334  - info: shelly.1 (1045) [firmwareUpdate] Auto-Update enabled - devices will be updated automatically
2024-08-08 17:05:56.337  - info: shelly.1 (1045) Starting in MQTT mode. Listening on 0.0.0.0:1882 (QoS 0)
2024-08-08 17:05:56.795  - info: rpi2.0 (1089) starting. Version 1.3.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.16.0, js-controller: 6.0.9
2024-08-08 17:05:57.071  - info: rpi2.0 (1089) GPIO ports are not configured

============ Mark until here for C&P =============

iob diag has finished.

======================= SUMMARY =======================
                        v.2024-05-22


   Static hostname: SmartHomeRohlik
         Icon name: computer
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               64 bit
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
Display-Server:         false
Boot Target:            multi-user.target

Pending OS-Updates:     0
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v20.16.0
/usr/bin/node           v20.16.0
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.2

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G         87M        7.5G        1.0M        257M        7.6G
Swap:            99M          0B         99M
Total:          7.9G         87M        7.6G

Active iob-Instances:   0
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0

node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
ioBroker Core:          js-controller
node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
                        admin

node:internal/modules/package_json_reader:83
        throw new ERR_INVALID_PACKAGE_CONFIG(
              ^

Error [ERR_INVALID_PACKAGE_CONFIG]: Invalid package config /opt/iobroker/node_modules/axios/package.json while importing "axios" from /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupUpload.js. Unexpected end of JSON input
    at Object.read (node:internal/modules/package_json_reader:83:15)
    at packageResolve (node:internal/modules/esm/resolve:835:45)
    at moduleResolve (node:internal/modules/esm/resolve:927:18)
    at defaultResolve (node:internal/modules/esm/resolve:1169:11)
    at ModuleLoader.defaultResolve (node:internal/modules/esm/loader:383:12)
    at ModuleLoader.resolve (node:internal/modules/esm/loader:352:25)
    at ModuleLoader.getModuleJob (node:internal/modules/esm/loader:227:38)
    at ModuleWrap.<anonymous> (node:internal/modules/esm/module_job:87:39)
    at link (node:internal/modules/esm/module_job:86:36) {
  code: 'ERR_INVALID_PACKAGE_CONFIG'
}

Node.js v20.16.0
ioBroker Status:

Status admin and web instance:

Objects:                0
States:                 0

Size of iob-Database:

11M     /opt/iobroker/iobroker-data/objects.jsonl
236K    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

=== Mark text until here for copying ===
SmartHomeRohlik@SmartHomeRohlik:/opt/iobroker $

[Thomas Braun]

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

Das ist der 'Erfolg'. Die Meldungen zur wackeligen Stromversorgung sind weg.
Einmal zerbröselte Dateien bekommst du natürlich nicht zurück, die sind kaputt.

[keineAhnungvonProgrmieren]

@thomas-braun said in Probleme beim Update Host node.js:

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

Das ist der 'Erfolg'. Die Meldungen zur wackeligen Stromversorgung sind weg.
Einmal zerbröselte Dateien bekommst du natürlich nicht zurück, die sind kaputt.

ok das heiß ich muss alles neu ausetzten? oder gibts da nen trick?

[Wildbill]

@keineahnungvonprogrmieren Da Dir niemand sagen kann, ob und welche Dateien da bereits zerstört wurden und Du die einfach so auch eh nicht mehr „retten“ kannst und damit auch niemand voraussehen kann, ob und wann sich das in welcher Form auswirkt, bleibt Dir da nur ein komplettes Neu-Installieren mit anschließendem Einspielen des Backups. Zumindest wäre das für mich die einzige Lösung, da ich für solche Dinge wie Smarthome und dergleichen ein 100% lauffähiges und verlässliches System ohne tickende Zeitbomben haben wollte.
Deshalb laufen für etwaige Stromausfälle auch USVs bei den kritischen Rechnern/Geräten, um da im Bedarfsfall sauber runterzufahren anhand Strom hart weg zu nehmen. Das war noch nie eine gute Idee oder gar Lösung für Probleme.

Gruss, Jürgen

[keineAhnungvonProgrmieren]

Chat GPT sagt dazu folgendes:

Zusammenfassung der möglichen Ursachen:

Beschädigte package.json-Datei: Die Datei könnte fehlerhaft sein, was bedeutet, dass sie möglicherweise nicht korrekt geladen wurde oder während der Installation beschädigt wurde.
Kompatibilitätsprobleme: Es könnte auch ein Problem mit der Node.js-Version oder mit der Art und Weise, wie ioBroker und seine Abhängigkeiten installiert wurden, geben.

Schritte zur Problemlösung:

1. Überprüfen der package.json von axios:
   Öffne die Datei /opt/iobroker/node_modules/axios/package.json und stelle sicher, dass sie vollständig und korrekt formatiert ist.
   Eine typische package.json-Datei sollte korrekt geschlossen sein und keine Syntaxfehler enthalten.

2. Neuinstallation von axios:

   Führe in deinem ioBroker-Verzeichnis den Befehl zur Neuinstallation von axios aus:

bash 
cd /opt/iobroker/ npm install axios --force

Dies sollte die fehlerhafte package.json-Datei ersetzen.

3. Neuinstallation der Abhängigkeiten:
   Wenn das Problem weiterhin besteht, führe den folgenden Befehl aus, um alle Abhängigkeiten von ioBroker neu zu installieren:

bash
npm install --production --force

4. Node.js-Version prüfen:

Stelle sicher, dass die Node.js-Version, die du verwendest (v20.16.0), mit ioBroker kompatibel ist. Es kann sein, dass ioBroker oder bestimmte Adapter Probleme mit dieser Node.js-Version haben. Eventuell ist eine frühere Version stabiler.

5. Backup und Neuinstallation von ioBroker:

Falls alle oben genannten Schritte nicht helfen, könnte eine vollständige Neuinstallation von ioBroker erforderlich sein. Stelle sicher, dass du vorher ein Backup aller wichtigen Konfigurationen und Daten machst.

Ist das eine möglich Abhilfe für das Problem?
wenn ja wie kann ich auf den ordner zugreifen? und wo bekomme ich die Datei her? oder doch besser gleich Abhilfe 2? sind die befehle korrekt?

wäre echt froh wenn ich um eine Neuinstallation rum komme da wir kommende Woche in den Familien Urlaub fahren wollen und die Automationen da wieder laufen sollten zwecks wasserversorgung unserer Pflanzen.

Danke fürs Helfen

[Homoran]

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

, könnte eine vollständige Neuinstallation von ioBroker erforderlich sein.

und für dies "Neuigkeit" dafür quälst du chatGPT?

oder hattest du gehofft, dass chatGPT dir was anderes erzählt als wir?

@keineahnungvonprogrmieren sagte in Probleme beim Update Host node.js:

wäre echt froh wenn ich um eine Neuinstallation rum komme da wir kommende Woche in den Familien Urlaub fahren wollen und die Automationen da wieder laufen sollten zwecks wasserversorgung unserer Pflanzen.

du wärst schon längst damit fertig, wenn du dich direkt daran gemacht hättest.
dauert erwa 1h.