NEWS
Test Adapter rpi2 2.x
Test Adapter rpi2 2.x
-
@garfonso said in Test Adapter rpi2 2.x:
@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
Wenn die GPIOs im Adapter nicht konfiguriert sind "sollte" der Adapter sich da auch nicht einmischen. Oder geht das über den Adapter irgendwie?
Ging das denn vorher auf Bookworm?
Es gibt system-tools um mit den gpios zu reden. Vielleicht kommst du damit irgendwie weiter... ehrlich gesagt hab ich da nicht wirklich viel Ahnung.
Ja, bis heute Mittag ging das. Ich komme wahrscheinlich nicht umhin den Vorschlag von @janga anzunehmen.
Ok, dann musst du mir erklären, das du genau tust und was nun nicht mehr geht. Also, z.B.
- Welche Adapter Version war "heute Mittag" noch im Einsatz?
- Welches Betriebssystem (z.B. Raspain Bookworm)? (z.B. rausfinden über die Kommandozeile mit
cat /etc/os-release) - Was sind die Einstellungen für die GPIOs? Eingang? Spielt entprellen da eine Rolle?
- Was heißt "funktioniert nicht mehr"?
Wenn es vorher ging und jetzt nicht mehr, wird da bestimmt was mit zu tun haben. Da stellt sich dann die frage, ob es wieder funktionieren kann, oder nicht.
Insbesondere, wenn das vorher mit der 1.x war und du nicht auf Bookworm bist, kann das damit zusammenhängen.@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
Wenn die GPIOs im Adapter nicht konfiguriert sind "sollte" der Adapter sich da auch nicht einmischen. Oder geht das über den Adapter irgendwie?
Ging das denn vorher auf Bookworm?
Es gibt system-tools um mit den gpios zu reden. Vielleicht kommst du damit irgendwie weiter... ehrlich gesagt hab ich da nicht wirklich viel Ahnung.Was bedeuten denn eigentlich die unteren beiden Auswahlmöglichkeiten?
DHT11 bzw. DHT22 kenne ich als Temperatur- und Feuchtigkeitssensoren. Im Grunde werden die GPIOs an diese Library weiter gereicht und die Werte regelmäßig ausgelesen (vermute ich). Ob das noch funktioniert, oder nicht, weiß ich nicht. Da geht es mir etwas wie mit dem Support für "Button" (gab es früher als Einstellung), da wäre für mich erstmal interessant, wie viele das wirklich nutzen und was damit gemacht wird, um zu sehen, wie viel Energie ich da rein stecken soll oder ob es nicht anders einfacher geht.
- Bis gestern Mittag hatte ich die Version 2.0.0 .Danach Update auf 2.1.1 .
pi@Raspi58GB:~ $ cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/"- Ja, an allen benutzten GPIO habe ich "Eingang" ausgewählt. Entprellen spielt keine Rolle.
- Der "Smartmeter" Adapter zeigt bei "Serielles Gerät: Name" nicht mehr "/dev/ttyS0" an, nur noch "/dev/ttyAMA0 und /dev/ttyAMA10". Somit startet der Adapter nicht mehr und liest über GPIO 14 und 15 (TXD0 und RXD0) die Stromdaten nicht mehr aus. In der Config des Raspi5 habe ich die serielle Schnittstelle aktiviert.
Das ist leider nicht das einzige Problem. Den Zigbee 3.0 USB Dongle bekomme ich auch nicht mehr gestartet.
Also es gab bis zur Version 2.0.0 gab es ein Sytemgerät
/dev/ttyS0? Aber was hat das mit dem Adapter zu tun? kopfkratzHypothese: bis zur 2.0.0 hat bei dir GPIO gar nicht funktioniert, weil die Bibliothek nicht inistialisiert / installiert war und daher hat das System sich um das
/dev/ttyS0gekümmert. Dadurch, dass der Adapter sich da nun "einmischt", geht das halt nicht mehr.
Daher die Frage: Was passiert, wenn du die GPIOs im Adapter deaktivierst oder den Adapter mal temporär stopst?Ich hab jetzt gerade mal etwas rumprobiert und in raspi-config -> Interface -> Serial Port shell und serial port aktiviert. Seitdem habe ich ein Gerät
/dev/serial0, was lautdmesgwas mit ttyS0 zu tun hat und auf den BCM7271 Chip zurück geht. Allerdings wird das bei mir nicht auf ttyS0, sondern auf ttyAMA10 gelinkt.
Im Netz hab ich gelesen, dass AMA0 möglicherweise Bluetooth ist.Grundsätzlich stellt sich bei mir die Frage, warum du die beiden GPIOs im Adapter aktiviert hast, wenn du sie anderweitig als tty nutzen möchtest. Also das würde ich definitiv ausstellen... oder willst du per ioBroker Objekten "zuhören"? kopfkratz
Ansonsten kannst du auch mal mit
gpioinfogucken, was der zu den GPIOs sagt. Bei mir kriege ich z.B. folgende Info:pi@kueche:~ $ gpioinfo | grep UART line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-highUltimativer Lovelace Leitfaden: https://forum.iobroker.net/topic/35937/der-ultimative-iobroker-lovelace-leitfaden-dokumentation
Lovelace UI Beispiele: https://forum.iobroker.net/topic/35950/zeigt-her-eure-lovelace-visualisierung
-
Also es gab bis zur Version 2.0.0 gab es ein Sytemgerät
/dev/ttyS0? Aber was hat das mit dem Adapter zu tun? kopfkratzHypothese: bis zur 2.0.0 hat bei dir GPIO gar nicht funktioniert, weil die Bibliothek nicht inistialisiert / installiert war und daher hat das System sich um das
/dev/ttyS0gekümmert. Dadurch, dass der Adapter sich da nun "einmischt", geht das halt nicht mehr.
Daher die Frage: Was passiert, wenn du die GPIOs im Adapter deaktivierst oder den Adapter mal temporär stopst?Ich hab jetzt gerade mal etwas rumprobiert und in raspi-config -> Interface -> Serial Port shell und serial port aktiviert. Seitdem habe ich ein Gerät
/dev/serial0, was lautdmesgwas mit ttyS0 zu tun hat und auf den BCM7271 Chip zurück geht. Allerdings wird das bei mir nicht auf ttyS0, sondern auf ttyAMA10 gelinkt.
Im Netz hab ich gelesen, dass AMA0 möglicherweise Bluetooth ist.Grundsätzlich stellt sich bei mir die Frage, warum du die beiden GPIOs im Adapter aktiviert hast, wenn du sie anderweitig als tty nutzen möchtest. Also das würde ich definitiv ausstellen... oder willst du per ioBroker Objekten "zuhören"? kopfkratz
Ansonsten kannst du auch mal mit
gpioinfogucken, was der zu den GPIOs sagt. Bei mir kriege ich z.B. folgende Info:pi@kueche:~ $ gpioinfo | grep UART line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high@garfonso Das passt zu dem was ich in der Zwischenzeit mit meinem Halbwissen ergoogelt habe.
AMA0 soll korrekt sein.
serial0 auch
ttyS0 auchIrgendwo hab ich noch gefunden, dass wohl AMA0 im Moment (??) gar nicht funktioniert, das Paket (welches auch immer) sei broken.
Irgendwo stand auch etwas davon, dass man nur die GPIOs aktivieren soll, die man nutzt, sonst gäbe es Probleme
-
Also es gab bis zur Version 2.0.0 gab es ein Sytemgerät
/dev/ttyS0? Aber was hat das mit dem Adapter zu tun? kopfkratzHypothese: bis zur 2.0.0 hat bei dir GPIO gar nicht funktioniert, weil die Bibliothek nicht inistialisiert / installiert war und daher hat das System sich um das
/dev/ttyS0gekümmert. Dadurch, dass der Adapter sich da nun "einmischt", geht das halt nicht mehr.
Daher die Frage: Was passiert, wenn du die GPIOs im Adapter deaktivierst oder den Adapter mal temporär stopst?Ich hab jetzt gerade mal etwas rumprobiert und in raspi-config -> Interface -> Serial Port shell und serial port aktiviert. Seitdem habe ich ein Gerät
/dev/serial0, was lautdmesgwas mit ttyS0 zu tun hat und auf den BCM7271 Chip zurück geht. Allerdings wird das bei mir nicht auf ttyS0, sondern auf ttyAMA10 gelinkt.
Im Netz hab ich gelesen, dass AMA0 möglicherweise Bluetooth ist.Grundsätzlich stellt sich bei mir die Frage, warum du die beiden GPIOs im Adapter aktiviert hast, wenn du sie anderweitig als tty nutzen möchtest. Also das würde ich definitiv ausstellen... oder willst du per ioBroker Objekten "zuhören"? kopfkratz
Ansonsten kannst du auch mal mit
gpioinfogucken, was der zu den GPIOs sagt. Bei mir kriege ich z.B. folgende Info:pi@kueche:~ $ gpioinfo | grep UART line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high -
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-highWenn ich Dich richtig verstehe, dann müsste doch auch gpiochip15 aufgeführt sein, oder...?
-
@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-highWenn ich Dich richtig verstehe, dann müsste doch auch gpiochip15 aufgeführt sein, oder...?
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
-
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
@laser sagte in Test Adapter rpi2 2.x:
Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
einen Raspi und ein Terminal
-
@laser sagte in Test Adapter rpi2 2.x:
Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
einen Raspi und ein Terminal
-
-
@garfonso Installieren kann ich (Version 2.2.0 manuell eingegeben), Ansicht wird die Neue, aber der Adapter startet nicht (linkes eigentlich grün werdendes Feld bleibt rotes Rad).
Werde den Adapter löschen und nochmal neu installieren.
EDIT: geht nicht? Bzw. bleibt in der Instanzübersicht rot (Rad).
RAM Nutzung wird auch mit 0 MB angezeigt.
2.1.2 hat funktioniert.otto@neuheizung:~ $ cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUGPIO's Entprellen: 100mSec
-
@thomas-braun sagte in Test Adapter rpi2 2.x:
Das Paket nennt sich
gpiod
dann hat @laser noch nicht den bookworm "patch"?
dann würde ich an seiner Stelle das Paket nicht installieren. -
@thomas-braun sagte in Test Adapter rpi2 2.x:
Das Paket nennt sich
gpiod
dann hat @laser noch nicht den bookworm "patch"?
dann würde ich an seiner Stelle das Paket nicht installieren. -
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
@laser said in Test Adapter rpi2 2.x:
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
Aber das war das doch, oder...)
-
@laser said in Test Adapter rpi2 2.x:
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
Aber das war das doch, oder...)
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
-
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
@laser said in Test Adapter rpi2 2.x:
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
Ich habe doch oben die Ausgabe von gpioinfo gegeben.
-
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
-
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
sudo apt update && apt policy gpiod -
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
@laser said in Test Adapter rpi2 2.x:
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
Ja und was brauchst Du dann?
-
@laser said in Test Adapter rpi2 2.x:
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
Ja und was brauchst Du dann?
@thomas-braun sagte in Test Adapter rpi2 2.x:
sudo apt update && apt policy gpiod
und das ist der bookworm- patch?
@searcher57 Das weiß ich eben nicht, was ich installieren muß, um den Befehl zu bekommen. -
@thomas-braun sagte in Test Adapter rpi2 2.x:
sudo apt update && apt policy gpiod
und das ist der bookworm- patch?
@searcher57 Das weiß ich eben nicht, was ich installieren muß, um den Befehl zu bekommen.Das ist das Paket, welche das Kommando
gpioinfobeinhaltet. -
Das ist das Paket, welche das Kommando
gpioinfobeinhaltet.@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found
Support us
611
Online32.4k
Users81.3k
Topics1.3m
Posts