NEWS
Test Adapter rpi2 2.x
Tester
519
Posts
29
Posters
148.2k
Views
20
Watching
-
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-highWenn ich Dich richtig verstehe, dann müsste doch auch gpiochip15 aufgeführt sein, oder...?
-
@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-highWenn ich Dich richtig verstehe, dann müsste doch auch gpiochip15 aufgeführt sein, oder...?
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
-
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
@laser sagte in Test Adapter rpi2 2.x:
Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
einen Raspi und ein Terminal
-
@laser sagte in Test Adapter rpi2 2.x:
Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
einen Raspi und ein Terminal
-
-
@garfonso Installieren kann ich (Version 2.2.0 manuell eingegeben), Ansicht wird die Neue, aber der Adapter startet nicht (linkes eigentlich grün werdendes Feld bleibt rotes Rad).
Werde den Adapter löschen und nochmal neu installieren.
EDIT: geht nicht? Bzw. bleibt in der Instanzübersicht rot (Rad).
RAM Nutzung wird auch mit 0 MB angezeigt.
2.1.2 hat funktioniert.otto@neuheizung:~ $ cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUGPIO's Entprellen: 100mSec
-
@thomas-braun sagte in Test Adapter rpi2 2.x:
Das Paket nennt sich
gpiod
dann hat @laser noch nicht den bookworm "patch"?
dann würde ich an seiner Stelle das Paket nicht installieren. -
@thomas-braun sagte in Test Adapter rpi2 2.x:
Das Paket nennt sich
gpiod
dann hat @laser noch nicht den bookworm "patch"?
dann würde ich an seiner Stelle das Paket nicht installieren. -
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
@laser said in Test Adapter rpi2 2.x:
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
Aber das war das doch, oder...)
-
@laser said in Test Adapter rpi2 2.x:
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
Aber das war das doch, oder...)
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
-
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
@laser said in Test Adapter rpi2 2.x:
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
Ich habe doch oben die Ausgabe von gpioinfo gegeben.
-
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
-
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
sudo apt update && apt policy gpiod -
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
@laser said in Test Adapter rpi2 2.x:
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
Ja und was brauchst Du dann?
-
@laser said in Test Adapter rpi2 2.x:
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
Ja und was brauchst Du dann?
@thomas-braun sagte in Test Adapter rpi2 2.x:
sudo apt update && apt policy gpiod
und das ist der bookworm- patch?
@searcher57 Das weiß ich eben nicht, was ich installieren muß, um den Befehl zu bekommen. -
@thomas-braun sagte in Test Adapter rpi2 2.x:
sudo apt update && apt policy gpiod
und das ist der bookworm- patch?
@searcher57 Das weiß ich eben nicht, was ich installieren muß, um den Befehl zu bekommen.Das ist das Paket, welche das Kommando
gpioinfobeinhaltet. -
Das ist das Paket, welche das Kommando
gpioinfobeinhaltet.@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found -
@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found -
@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found@laser said in Test Adapter rpi2 2.x:
@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not foundNa dann merke ic endlich, daß auch bei Euch Uneinigkeit besteht!
-
sudo apt update && apt policy gpiod Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://packages.grafana.com/enterprise/deb stable InRelease Hit:6 https://repos.influxdata.com/debian stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 1 package can be upgraded. Run 'apt list --upgradable' to see it. W: https://packages.grafana.com/enterprise/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. gpiod: Installed: (none) Candidate: 1.6.3-1+b3 Version table: 1.6.3-1+b3 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages otto@neuheizung:/dev $ gpioinfo -bash: gpioinfo: command not found otto@neuheizung:/dev $ gpioinfo -bash: gpioinfo: command not found
Support us
570
Online32.4k
Users81.4k
Topics1.3m
Posts