NEWS
iobroker web Interface nicht mehr erreichbar nach Absturz
iobroker web Interface nicht mehr erreichbar nach Absturz
ioBroker Allgemein
44
Posts
5
Posters
4.1k
Views
4
Watching
-
@saschal sagte in iobroker web Interface nicht mehr erreichbar nach Absturz:
Kann ich das Rückgängig machen (ohne Neuinstallation)?
Jein. Aber du kannst zumindest erstmal nur bis zu den Terminals booten. Siehe meinen Befehl dazu unmittelbar drunter.
Im iobroker habe ich alle Updates installiert und es wurde auch sonst nichts angezeigt.
Die 228 Updates stehen ja auch eine Etage tiefer beim Betriebssystem ins Haus.
sudo apt update sudo apt full-upgrade sudo rebootUnd zu sury / PHP musste mal googlen, wie deren Repo richtig aufgesetzt wird. Brauchst du den ganzen LAMP-Stack da überhaupt?
@thomas-braun
OK, den Befehl für das Terminal hatte ich nicht erkannt, aber jetzt mal durchgeführt.
Die 228 Updates
habe ich dann auch mal installiert (Das sollte ich wohl regelmäßiger machen - ich gelobe Besserung)Was das mit sury / PHP auf sich hat, kann ich nicht sagen, keine Ahnung wo das herkommt.
Hier mal die vollständige Diagnose:
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.20+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 18:40:56 up 1 min, 3 users, load average: 1.62, 0.64, 0.24 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2024-04-18 18:40:57 CEST Universal time: Thu 2024-04-18 16:40:57 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.4G 1.6G 1.4M 1.0G 2.5G Swap: 104M 0B 104M Total: 4.1G 1.4G 1.7G 3791 M total memory 1377 M used memory 1660 M active memory 473 M inactive memory 1535 M free memory 59 M buffer memory 896 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * apache2.service loaded failed failed The Apache HTTP Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 378M 1% /run /dev/sda2 ext4 440G 26G 396G 7% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 32K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Apr 18 18:39:18 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:A5:A4:0E vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=234b4562-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Apr 18 18:39:21 2024] EXT4-fs (sda2): mounted filesystem cb6f0e18-5add-4177-ab98-e9f0235e06b3 ro with ordered data mode. Quota mode: none. [Thu Apr 18 18:39:23 2024] EXT4-fs (sda2): re-mounted cb6f0e18-5add-4177-ab98-e9f0235e06b3 r/w. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 15G /var/ 13G /var/lib/influxdb/engine/data/4418a96cfa747ddf/autogen 13G /var/lib/influxdb/engine/data/4418a96cfa747ddf 13G /var/lib/influxdb/engine/data 13G /var/lib/influxdb/engine Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 4.4G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 245M /opt/iobroker/iobroker-data/ 160M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/backup-objects 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 18M /opt/iobroker/iobroker-data/states.jsonl 17M /opt/iobroker/iobroker-data/objects.jsonl 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2260065-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.doorbird.0 : doorbird : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - enabled + system.adapter.openknx.0 : openknx : raspberrypi - enabled system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.178.168 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sony-bravia.0 : sony-bravia : raspberrypi - enabled + system.adapter.sprinklecontrol.0 : sprinklecontrol : raspberrypi - enabled system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2260065-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.178.168 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2260065-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "doorbird" : 1.5.0 , installed 1.5.0 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openknx" : 0.7.2 , installed 0.7.2 Adapter "radar2" : 2.1.0 , installed 2.1.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.8.0 , installed 6.8.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.1 , installed 6.6.1 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sony-bravia" : 1.0.9 , installed 1.0.9 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.5.11 , installed 2.5.11 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 6870 States: 5722 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Get:7 https://packages.sury.org/php bookworm InRelease [7542 B] Hit:8 https://deb.nodesource.com/node_18.x nodistro InRelease Fetched 7542 B in 3s (2668 B/s) Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 10803 1909/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7426 760/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7407 736/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9672 992/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 9005 992/iobroker.js-con tcp 0 0 192.168.178.168:1882 0.0.0.0:* LISTEN 1001 10985 2141/io.shelly.0 tcp 0 0 192.168.178.168:8100 0.0.0.0:* LISTEN 1001 12173 2191/io.doorbird.0 tcp6 0 0 :::35889 :::* LISTEN 1001 11067 2218/io.yahka.0 tcp6 0 0 :::8082 :::* LISTEN 1001 13691 2414/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 9051 1652/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 8512 827/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 14821 2565/io.ws.0 tcp6 0 0 ::1:631 :::* LISTEN 0 7406 736/cupsd tcp6 0 0 :::22 :::* LISTEN 0 7428 760/sshd: /usr/sbin tcp6 0 0 :::3000 :::* LISTEN 112 9660 991/grafana udp 0 0 0.0.0.0:33542 0.0.0.0:* 104 6374 553/avahi-daemon: r udp 0 0 192.168.178.168:5353 0.0.0.0:* 1001 10682 1815/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6372 553/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 6580 822/cups-browsed udp 0 0 0.0.0.0:55951 0.0.0.0:* 1001 10762 1845/io.openknx.0 udp6 0 0 :::5353 :::* 104 6373 553/avahi-daemon: r udp6 0 0 :::45562 :::* 104 6375 553/avahi-daemon: r udp6 0 0 fe80::b255:d617:bb8:546 :::* 0 6026 660/NetworkManager *** Log File - Last 25 Lines *** 2024-04-18 18:41:55.297 - info: fritzdect.0 (3070) start creating routines 2024-04-18 18:41:55.365 - info: statistics.0 (3105) starting. Version 2.4.0 in /opt/iobroker/node_modules/iobroker.statistics, node: v18.20.2, js-controller: 5.0.19 2024-04-18 18:41:55.384 - info: fritzdect.0 (3070) finished creating routines (if any) 2024-04-18 18:41:55.385 - info: fritzdect.0 (3070) start initial updating devices/groups 2024-04-18 18:41:56.280 - info: fritzdect.0 (3070) finished initial updating devices/groups 2024-04-18 18:41:56.282 - info: fritzdect.0 (3070) going over to cyclic polling, messages to poll activity only in debug-mode 2024-04-18 18:41:56.604 - info: statistics.0 (3105) [SETUP] observing 0 values after startup 2024-04-18 18:41:59.921 - info: host.raspberrypi instance system.adapter.radar2.0 started with pid 3137 2024-04-18 18:42:04.395 - warn: radar2.0 (3137) Uncaught Exception: bind EACCES 0.0.0.0:67 2024-04-18 18:42:04.404 - error: radar2.0 (3137) uncaught exception: bind EACCES 0.0.0.0:67 2024-04-18 18:42:04.407 - error: radar2.0 (3137) Error: bind EACCES 0.0.0.0:67 at node:dgram:364:20 at process.processTicksAndRejections (node:internal/process/task_queues:83:21) 2024-04-18 18:42:04.414 - error: radar2.0 (3137) Exception-Code: EACCES: bind EACCES 0.0.0.0:67 2024-04-18 18:42:04.439 - warn: radar2.0 (3137) Terminated (UNCAUGHT_EXCEPTION): Without reason 2024-04-18 18:42:05.052 - error: host.raspberrypi instance system.adapter.radar2.0 terminated with code 6 (UNCAUGHT_EXCEPTION) 2024-04-18 18:42:05.053 - info: host.raspberrypi Restart adapter system.adapter.radar2.0 because enabled 2024-04-18 18:42:05.053 - warn: host.raspberrypi Do not restart adapter system.adapter.radar2.0 because restart loop detected 2024-04-18 18:42:13.263 - warn: javascript.0 (1695) You are assigning a string to the state "0_userdata.0.Konvertierung.FBH_Pumpe_AN" which expects a object. Please fix your code to use a object or change the state type to string. This warning might become an error in future versions. 2024-04-18 18:42:13.858 - warn: javascript.0 (1695) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1819:20) 2024-04-18 18:42:13.860 - warn: javascript.0 (1695) at Object.<anonymous> (script.js.common.Status.Status_Pmp__FBH:5:5) 2024-04-18 18:42:13.861 - warn: javascript.0 (1695) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1269:38) 2024-04-18 18:42:13.861 - warn: javascript.0 (1695) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:641:29) 2024-04-18 18:42:13.861 - warn: javascript.0 (1695) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.ts:11200:62) 2024-04-18 18:42:13.862 - warn: javascript.0 (1695) at processImmediate (node:internal/timers:476:21)============ Mark until here for C&P =============
-
@thomas-braun
OK, den Befehl für das Terminal hatte ich nicht erkannt, aber jetzt mal durchgeführt.
Die 228 Updates habe ich dann auch mal installiert (Das sollte ich wohl regelmäßiger machen - ich gelobe Besserung)Was das mit sury / PHP auf sich hat, kann ich nicht sagen, keine Ahnung wo das herkommt.
Hier mal die vollständige Diagnose:
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.20+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 18:40:56 up 1 min, 3 users, load average: 1.62, 0.64, 0.24 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2024-04-18 18:40:57 CEST Universal time: Thu 2024-04-18 16:40:57 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.4G 1.6G 1.4M 1.0G 2.5G Swap: 104M 0B 104M Total: 4.1G 1.4G 1.7G 3791 M total memory 1377 M used memory 1660 M active memory 473 M inactive memory 1535 M free memory 59 M buffer memory 896 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * apache2.service loaded failed failed The Apache HTTP Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 378M 1% /run /dev/sda2 ext4 440G 26G 396G 7% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 32K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Apr 18 18:39:18 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:A5:A4:0E vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=234b4562-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Apr 18 18:39:21 2024] EXT4-fs (sda2): mounted filesystem cb6f0e18-5add-4177-ab98-e9f0235e06b3 ro with ordered data mode. Quota mode: none. [Thu Apr 18 18:39:23 2024] EXT4-fs (sda2): re-mounted cb6f0e18-5add-4177-ab98-e9f0235e06b3 r/w. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 15G /var/ 13G /var/lib/influxdb/engine/data/4418a96cfa747ddf/autogen 13G /var/lib/influxdb/engine/data/4418a96cfa747ddf 13G /var/lib/influxdb/engine/data 13G /var/lib/influxdb/engine Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 4.4G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 245M /opt/iobroker/iobroker-data/ 160M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/backup-objects 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 18M /opt/iobroker/iobroker-data/states.jsonl 17M /opt/iobroker/iobroker-data/objects.jsonl 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2260065-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.doorbird.0 : doorbird : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - enabled + system.adapter.openknx.0 : openknx : raspberrypi - enabled system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.178.168 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sony-bravia.0 : sony-bravia : raspberrypi - enabled + system.adapter.sprinklecontrol.0 : sprinklecontrol : raspberrypi - enabled system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2260065-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.178.168 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2260065-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "doorbird" : 1.5.0 , installed 1.5.0 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openknx" : 0.7.2 , installed 0.7.2 Adapter "radar2" : 2.1.0 , installed 2.1.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.8.0 , installed 6.8.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.1 , installed 6.6.1 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sony-bravia" : 1.0.9 , installed 1.0.9 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.5.11 , installed 2.5.11 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 6870 States: 5722 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Get:7 https://packages.sury.org/php bookworm InRelease [7542 B] Hit:8 https://deb.nodesource.com/node_18.x nodistro InRelease Fetched 7542 B in 3s (2668 B/s) Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 10803 1909/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7426 760/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7407 736/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9672 992/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 9005 992/iobroker.js-con tcp 0 0 192.168.178.168:1882 0.0.0.0:* LISTEN 1001 10985 2141/io.shelly.0 tcp 0 0 192.168.178.168:8100 0.0.0.0:* LISTEN 1001 12173 2191/io.doorbird.0 tcp6 0 0 :::35889 :::* LISTEN 1001 11067 2218/io.yahka.0 tcp6 0 0 :::8082 :::* LISTEN 1001 13691 2414/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 9051 1652/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 8512 827/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 14821 2565/io.ws.0 tcp6 0 0 ::1:631 :::* LISTEN 0 7406 736/cupsd tcp6 0 0 :::22 :::* LISTEN 0 7428 760/sshd: /usr/sbin tcp6 0 0 :::3000 :::* LISTEN 112 9660 991/grafana udp 0 0 0.0.0.0:33542 0.0.0.0:* 104 6374 553/avahi-daemon: r udp 0 0 192.168.178.168:5353 0.0.0.0:* 1001 10682 1815/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6372 553/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 6580 822/cups-browsed udp 0 0 0.0.0.0:55951 0.0.0.0:* 1001 10762 1845/io.openknx.0 udp6 0 0 :::5353 :::* 104 6373 553/avahi-daemon: r udp6 0 0 :::45562 :::* 104 6375 553/avahi-daemon: r udp6 0 0 fe80::b255:d617:bb8:546 :::* 0 6026 660/NetworkManager *** Log File - Last 25 Lines *** 2024-04-18 18:41:55.297 - info: fritzdect.0 (3070) start creating routines 2024-04-18 18:41:55.365 - info: statistics.0 (3105) starting. Version 2.4.0 in /opt/iobroker/node_modules/iobroker.statistics, node: v18.20.2, js-controller: 5.0.19 2024-04-18 18:41:55.384 - info: fritzdect.0 (3070) finished creating routines (if any) 2024-04-18 18:41:55.385 - info: fritzdect.0 (3070) start initial updating devices/groups 2024-04-18 18:41:56.280 - info: fritzdect.0 (3070) finished initial updating devices/groups 2024-04-18 18:41:56.282 - info: fritzdect.0 (3070) going over to cyclic polling, messages to poll activity only in debug-mode 2024-04-18 18:41:56.604 - info: statistics.0 (3105) [SETUP] observing 0 values after startup 2024-04-18 18:41:59.921 - info: host.raspberrypi instance system.adapter.radar2.0 started with pid 3137 2024-04-18 18:42:04.395 - warn: radar2.0 (3137) Uncaught Exception: bind EACCES 0.0.0.0:67 2024-04-18 18:42:04.404 - error: radar2.0 (3137) uncaught exception: bind EACCES 0.0.0.0:67 2024-04-18 18:42:04.407 - error: radar2.0 (3137) Error: bind EACCES 0.0.0.0:67 at node:dgram:364:20 at process.processTicksAndRejections (node:internal/process/task_queues:83:21) 2024-04-18 18:42:04.414 - error: radar2.0 (3137) Exception-Code: EACCES: bind EACCES 0.0.0.0:67 2024-04-18 18:42:04.439 - warn: radar2.0 (3137) Terminated (UNCAUGHT_EXCEPTION): Without reason 2024-04-18 18:42:05.052 - error: host.raspberrypi instance system.adapter.radar2.0 terminated with code 6 (UNCAUGHT_EXCEPTION) 2024-04-18 18:42:05.053 - info: host.raspberrypi Restart adapter system.adapter.radar2.0 because enabled 2024-04-18 18:42:05.053 - warn: host.raspberrypi Do not restart adapter system.adapter.radar2.0 because restart loop detected 2024-04-18 18:42:13.263 - warn: javascript.0 (1695) You are assigning a string to the state "0_userdata.0.Konvertierung.FBH_Pumpe_AN" which expects a object. Please fix your code to use a object or change the state type to string. This warning might become an error in future versions. 2024-04-18 18:42:13.858 - warn: javascript.0 (1695) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1819:20) 2024-04-18 18:42:13.860 - warn: javascript.0 (1695) at Object.<anonymous> (script.js.common.Status.Status_Pmp__FBH:5:5) 2024-04-18 18:42:13.861 - warn: javascript.0 (1695) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1269:38) 2024-04-18 18:42:13.861 - warn: javascript.0 (1695) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:641:29) 2024-04-18 18:42:13.861 - warn: javascript.0 (1695) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.ts:11200:62) 2024-04-18 18:42:13.862 - warn: javascript.0 (1695) at processImmediate (node:internal/timers:476:21)============ Mark until here for C&P =============
@saschal sagte in iobroker web Interface nicht mehr erreichbar nach Absturz:
Was das mit sury / PHP auf sich hat, kann ich nicht sagen, keine Ahnung wo das herkommt.
Das ist schlecht. Du solltest wissen, warum und wie da zusätzliche Softwarequellen auf deinem System leben. Ich kann es dir nicht beantworten, die legt man sich i.d.R. nämlich aus Gründen an.
-
hilft vielleicht der Erinnerung auf die Sprünge
-
@saschal sagte in iobroker web Interface nicht mehr erreichbar nach Absturz:
Was das mit sury / PHP auf sich hat, kann ich nicht sagen, keine Ahnung wo das herkommt.
Das ist schlecht. Du solltest wissen, warum und wie da zusätzliche Softwarequellen auf deinem System leben. Ich kann es dir nicht beantworten, die legt man sich i.d.R. nämlich aus Gründen an.
@thomas-braun
Das kann ja nur durch irgendein Adapter für den iobroker gekommen sein.
Da müsste ich mal die zuletzt installierten Adapter prüfen ob das daher kommt (Nuki-extendet oder Shelly)Sonst läuft auf dem Raspi nichts.
Danke und Gruß,
Sascha -
@thomas-braun
Das kann ja nur durch irgendein Adapter für den iobroker gekommen sein.
Da müsste ich mal die zuletzt installierten Adapter prüfen ob das daher kommt (Nuki-extendet oder Shelly)Sonst läuft auf dem Raspi nichts.
Danke und Gruß,
Sascha@saschal sagte in iobroker web Interface nicht mehr erreichbar nach Absturz:
Das kann ja nur durch irgendein Adapter für den iobroker gekommen sein.
Nein. iobroker-Adapter schleppen keine Repos für das Betriebssystem an. Da hast du dir ganz offenbar einen LAMP ans Bein gehängt.
https://wiki.ubuntuusers.de/LAMP/Es gibt wohl draußen irgendwelche Anleitungen, die dann empfehlen das sury-Repo in das System zu heben. Vermutlich bist du mal so einer Anleitung gefolgt. Setzt du den LAMP denn überhaupt ein?
-
@saschal sagte in iobroker web Interface nicht mehr erreichbar nach Absturz:
Das kann ja nur durch irgendein Adapter für den iobroker gekommen sein.
Nein. iobroker-Adapter schleppen keine Repos für das Betriebssystem an. Da hast du dir ganz offenbar einen LAMP ans Bein gehängt.
https://wiki.ubuntuusers.de/LAMP/Es gibt wohl draußen irgendwelche Anleitungen, die dann empfehlen das sury-Repo in das System zu heben. Vermutlich bist du mal so einer Anleitung gefolgt. Setzt du den LAMP denn überhaupt ein?
@thomas-braun
Mir dämmert da was - das könnte passiert sein, als ich versucht habe den Tasmo Admin zu installieren, das hat aber aus Unvermögen meinerseits nicht funktioniert und ich habe da nicht mehr weitergemacht.
Das kann es nur gewesen sein.Da könnte ich also gut drauf verzichten…
Das müsste sich doch deinstallieren lassen
Gruß,
Sascha -
@thomas-braun
Mir dämmert da was - das könnte passiert sein, als ich versucht habe den Tasmo Admin zu installieren, das hat aber aus Unvermögen meinerseits nicht funktioniert und ich habe da nicht mehr weitergemacht.
Das kann es nur gewesen sein.Da könnte ich also gut drauf verzichten…
Das müsste sich doch deinstallieren lassen
Gruß,
Sascha -
@thomas-braun
So, Apache2 konnte ich dann auch entfernen. Allerdings verbleibt noch ein Eintrag von sury, das bekomme ich nicht weg.
In der sources.list ist es auch nicht zu finden.*** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Get:7 https://packages.sury.org/php bookworm InRelease [7542 B] Hit:8 https://deb.nodesource.com/node_18.x nodistro InRelease Fetched 7542 B in 3s (2223 B/s) Reading package lists... Pending Updates: 0Wie kann ich das denn noch bereinigen?
-
Dir sury.list (Oder so ähnlich dürfte die heißen) liegt im Verzeichnis /etc/apt/sources list.d/
-
Dir sury.list (Oder so ähnlich dürfte die heißen) liegt im Verzeichnis /etc/apt/sources list.d/
Ja, jetzt ist auch die weg. (Sie hieß nicht sury.list sondern php.list).
*** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0Vielen Dank für die Hilfe!
102
Online32.4k
Users81.3k
Topics1.3m
Posts