NEWS
-
@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
apt policy influx*
pi@iobroker:~ $ apt policy influx* N: Unable to locate package influx N: Unable to locate package influxdata-archive_compat.key N: Unable to locate package influxdata-archive_compat.key.1 N: Unable to locate package influxdb2-client-2.3.0-linux-amd64.tar.gz N: Couldn't find any package by glob 'influxdb2-client-2.3.0-linux-amd64.tar.gz' N: Unable to locate package influxdb2-client-2.7.3-linux-amd64.tar.gz N: Couldn't find any package by glob 'influxdb2-client-2.7.3-linux-amd64.tar.gz'Ähm, das sieht aber nicht gut aus, InfluxDB läuft aber......
Software wird nicht so installiert, man verwendet einen Paketmanager.
sudo apt install PAKETNAMEDas entsprechende Repository muss zuvor ggfs . installiert werden.
-
@willi-wunder Läuft Influxdb auf dem gleichen System wie iobroker?
@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
@willi-wunder Läuft Influxdb auf dem gleichen System wie iobroker?
Ja
-
@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
@willi-wunder Läuft Influxdb auf dem gleichen System wie iobroker?
Ja
cd rm influx* sudo apt update apt policy influx* -
cd rm influx* sudo apt update apt policy influx*pi@iobroker:~ $ apt policy influx* influxdb2-cli: Installed: 2.7.3-1 Candidate: 2.7.3-1 Version table: *** 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.1-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages influxdb-client: Installed: (none) Candidate: 1.6.7~rc0-1+b13 Version table: 1.6.7~rc0-1+b13 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages influxdb-dev: Installed: (none) Candidate: (none) Version table: influxdb2-client: Installed: (none) Candidate: 2.7.1-1 Version table: 2.7.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages influxdb: Installed: (none) Candidate: 1.8.10-1 Version table: 1.8.10-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.6.7~rc0-1+b13 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages influxctl: Installed: (none) Candidate: 2.4.2 Version table: 2.4.2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.2.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.1.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.4 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.3 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages influxdb2: Installed: 2.7.4-1 Candidate: 2.7.4-1 Version table: *** 2.7.4-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.7.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.7.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.2.0 500 500 https://repos.influxdata.com/debian stable/main arm64 PackagesDanke, sieht jetzt schon besser aus :-)
-
pi@iobroker:~ $ apt policy influx* influxdb2-cli: Installed: 2.7.3-1 Candidate: 2.7.3-1 Version table: *** 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.1-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages influxdb-client: Installed: (none) Candidate: 1.6.7~rc0-1+b13 Version table: 1.6.7~rc0-1+b13 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages influxdb-dev: Installed: (none) Candidate: (none) Version table: influxdb2-client: Installed: (none) Candidate: 2.7.1-1 Version table: 2.7.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages influxdb: Installed: (none) Candidate: 1.8.10-1 Version table: 1.8.10-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.6.7~rc0-1+b13 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages influxctl: Installed: (none) Candidate: 2.4.2 Version table: 2.4.2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.2.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.1.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.4 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.3 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.0.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages influxdb2: Installed: 2.7.4-1 Candidate: 2.7.4-1 Version table: *** 2.7.4-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.7.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.7.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.1-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.2.0 500 500 https://repos.influxdata.com/debian stable/main arm64 PackagesDanke, sieht jetzt schon besser aus :-)
sudo apt install influxdb2-client -
sudo apt install influxdb2-client@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
sudo apt install influxdb2-client
pi@iobroker:~ $ sudo apt install influxdb2-client Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: influxdb2-client 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 10.5 MB of archives. After this operation, 24.0 MB of additional disk space will be used. Get:1 https://repos.influxdata.com/debian stable/main arm64 influxdb2-client arm64 2.7.1-1 [10.5 MB] Fetched 10.5 MB in 2s (4392 kB/s) apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Selecting previously unselected package influxdb2-client. (Reading database ... 146179 files and directories currently installed.) Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ... Unpacking influxdb2-client (2.7.1-1) ... dpkg: error processing archive /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb (--unpack): trying to overwrite '/usr/bin/influx', which is also in package influxdb2-cli 2.7.3-1 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)Hätte ich vorher InfluxDB stoppen müssen?
-
@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
sudo apt install influxdb2-client
pi@iobroker:~ $ sudo apt install influxdb2-client Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: influxdb2-client 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 10.5 MB of archives. After this operation, 24.0 MB of additional disk space will be used. Get:1 https://repos.influxdata.com/debian stable/main arm64 influxdb2-client arm64 2.7.1-1 [10.5 MB] Fetched 10.5 MB in 2s (4392 kB/s) apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Selecting previously unselected package influxdb2-client. (Reading database ... 146179 files and directories currently installed.) Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ... Unpacking influxdb2-client (2.7.1-1) ... dpkg: error processing archive /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb (--unpack): trying to overwrite '/usr/bin/influx', which is also in package influxdb2-cli 2.7.3-1 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)Hätte ich vorher InfluxDB stoppen müssen?
@willi-wunder sagte in mit backitup kein Influxdb und Grafana backup möglich:
/usr/bin/influx
ohhh man da ist einiges vermurkst ...
sudo rm /usr/bin/influx sudo apt install influxdb2-client -
@willi-wunder sagte in mit backitup kein Influxdb und Grafana backup möglich:
/usr/bin/influx
ohhh man da ist einiges vermurkst ...
sudo rm /usr/bin/influx sudo apt install influxdb2-client@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
sudo apt install influxdb2-client
pi@iobroker:~ $ sudo rm /usr/bin/influx pi@iobroker:~ $ sudo apt install influxdb2-client Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: influxdb2-client 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 0 B/10.5 MB of archives. After this operation, 24.0 MB of additional disk space will be used. apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146179 files and directories currently installed.) Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ... Unpacking influxdb2-client (2.7.1-1) ... dpkg: error processing archive /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb (--unpack): trying to overwrite '/usr/bin/influx', which is also in package influxdb2-cli 2.7.3-1 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)Hab den Rasp von Buster auf Bookworm neu eingerichtet, allerdings ein Backup vom Iobroker eingespielt. Hatte unter Buster influxDB 1.x gehabt. Mist...... Vielen Dank für eure Hilfe.
-
@simatec sagte in mit backitup kein Influxdb und Grafana backup möglich:
sudo apt install influxdb2-client
pi@iobroker:~ $ sudo rm /usr/bin/influx pi@iobroker:~ $ sudo apt install influxdb2-client Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: influxdb2-client 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 0 B/10.5 MB of archives. After this operation, 24.0 MB of additional disk space will be used. apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146179 files and directories currently installed.) Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ... Unpacking influxdb2-client (2.7.1-1) ... dpkg: error processing archive /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb (--unpack): trying to overwrite '/usr/bin/influx', which is also in package influxdb2-cli 2.7.3-1 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/influxdb2-client_2.7.1-1_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)Hab den Rasp von Buster auf Bookworm neu eingerichtet, allerdings ein Backup vom Iobroker eingespielt. Hatte unter Buster influxDB 1.x gehabt. Mist...... Vielen Dank für eure Hilfe.
@willi-wunder Hast du vorher nicht den Befehl zum löschen ausgeführt?
-
@willi-wunder Hast du vorher nicht den Befehl zum löschen ausgeführt?
-
@simatec
Doch, gerade oben mit ergänzt, hatte ich zuvor mit ausgeführt......apt policy influxdb2-cli -
apt policy influxdb2-clipi@iobroker:~ $ apt policy influxdb2-cli influxdb2-cli: Installed: 2.7.3-1 Candidate: 2.7.3-1 Version table: *** 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.1-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages -
pi@iobroker:~ $ apt policy influxdb2-cli influxdb2-cli: Installed: 2.7.3-1 Candidate: 2.7.3-1 Version table: *** 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.1-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages@willi-wunder Dann war aber die Ausgabe vorher nicht vollständig...
-
pi@iobroker:~ $ apt policy influxdb2-cli influxdb2-cli: Installed: 2.7.3-1 Candidate: 2.7.3-1 Version table: *** 2.7.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 100 /var/lib/dpkg/status 2.7.1-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.6.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.5.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.4.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 2.3.0 500 500 https://repos.influxdata.com/debian stable/main arm64 Packagessudo apt remove influxdb2-cli sudo apt install influxdb2-client -
@willi-wunder Dann war aber die Ausgabe vorher nicht vollständig...
@simatec
Du meinst wegensudo rm /usr/bin/influx? Das hatte ich beim Code kopieren übersehen und dann nachgetragen. -
@simatec
Du meinst wegensudo rm /usr/bin/influx? Das hatte ich beim Code kopieren übersehen und dann nachgetragen.pi@iobroker:~ $ sudo apt remove influxdb2-cli Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: influxdb2-cli 0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded. After this operation, 24.1 MB disk space will be freed. Do you want to continue? [Y/n] y apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146179 files and directories currently installed.) Removing influxdb2-cli (2.7.3-1) ... pi@iobroker:~ $ sudo apt install influxdb2-client Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: influxdb2-client 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 0 B/10.5 MB of archives. After this operation, 24.0 MB of additional disk space will be used. apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146176 files and directories currently installed.) Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ... Unpacking influxdb2-client (2.7.1-1) ... Setting up influxdb2-client (2.7.1-1) ... -
pi@iobroker:~ $ sudo apt remove influxdb2-cli Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: influxdb2-cli 0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded. After this operation, 24.1 MB disk space will be freed. Do you want to continue? [Y/n] y apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146179 files and directories currently installed.) Removing influxdb2-cli (2.7.3-1) ... pi@iobroker:~ $ sudo apt install influxdb2-client Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: influxdb2-client 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 0 B/10.5 MB of archives. After this operation, 24.0 MB of additional disk space will be used. apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146176 files and directories currently installed.) Preparing to unpack .../influxdb2-client_2.7.1-1_arm64.deb ... Unpacking influxdb2-client (2.7.1-1) ... Setting up influxdb2-client (2.7.1-1) ...@willi-wunder ohhh je da ist soviel krum ...
Was bekommst du nun als Ausgabe vonsudo influx auth list -t 74VTRbf_Qc6sAG_goAo4AMkdEdPKkPdWFyxVzrPhY5hNuxX43QdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --json -
@willi-wunder ohhh je da ist soviel krum ...
Was bekommst du nun als Ausgabe vonsudo influx auth list -t 74VTRbf_Qc6sAG_goAo4AMkdEdPKkPdWFyxVzrPhY5hNuxX43QdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --jsonpi@iobroker:~ $ sudo influx auth list -t 74VTRbf_Qc6sAG_goAo4AMkdEdPKkPdWFyxVzrPhY5hNuxX43QdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --json /usr/local/bin/influx: 1: Syntax error: ")" unexpected -
pi@iobroker:~ $ sudo influx auth list -t 74VTRbf_Qc6sAG_goAo4AMkdEdPKkPdWFyxVzrPhY5hNuxX43QdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --json /usr/local/bin/influx: 1: Syntax error: ")" unexpectedsudo apt update sudo apt full-upgrade sudo reboot -
sudo apt update sudo apt full-upgrade sudo rebootpi@iobroker:~ $ sudo apt update Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 3 packages can be upgraded. Run 'apt list --upgradable' to see them. pi@iobroker:~ $ sudo apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: curl libcurl3-gnutls libcurl4 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 1034 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian-security bookworm-security/main arm64 curl arm64 7.88.1-10+deb12u5 [308 kB] Get:2 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl4 arm64 7.88.1-10+deb12u5 [366 kB] Get:3 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl3-gnutls arm64 7.88.1-10+deb12u5 [360 kB] Fetched 1034 kB in 0s (3344 kB/s) apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct! Changelogs werden gelesen... Fertig perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "de_DE", LC_ALL = "de_DE", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... 146179 files and directories currently installed.) Preparing to unpack .../curl_7.88.1-10+deb12u5_arm64.deb ... Unpacking curl (7.88.1-10+deb12u5) over (7.88.1-10+deb12u4) ... Preparing to unpack .../libcurl4_7.88.1-10+deb12u5_arm64.deb ... Unpacking libcurl4:arm64 (7.88.1-10+deb12u5) over (7.88.1-10+deb12u4) ... Preparing to unpack .../libcurl3-gnutls_7.88.1-10+deb12u5_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.88.1-10+deb12u5) over (7.88.1-10+deb12u4) ... Setting up libcurl3-gnutls:arm64 (7.88.1-10+deb12u5) ... Setting up libcurl4:arm64 (7.88.1-10+deb12u5) ... Setting up curl (7.88.1-10+deb12u5) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ...Nach Reboot:
pi@iobroker:~ $ sudo influx auth list -t 74VTRbf_Qc6sAG_goAo4AMkdEdPKkPdWFyxVzrPhY5hNuxX43QdnYAiIWp9rmexTYHJbxa1I0dQ_wNkqkexV7A== --json /usr/local/bin/influx: 1: Syntax error: ")" unexpectedBleibt es leider so......
Support us
729
Online32.4k
Users81.5k
Topics1.3m
Posts