Backup wiederherstellen

Codierknecht

@christoph-g sagte in Backup wiederherstellen:

Bin sowieso nur über ssh drauf

Eben

Habe aktuell nur nen Raspi 2 zur Hand

Zur Not eine Windows-Kiste, um erstmal das alte Backup wiederherstellen zu können.
Danach Upgrade und neues Backup erzeugen. Das kann dann in einem frischen ioBroker wiederhergestellt werden.

Oder wie @Thomas-Braun schreibt: Alle neu macht der ~~Mai~~ Oktober.
Backup hast Du ja. ioBroker neu aufsetzen, Downgrade des JS-Controller auf die passende Version und nach dem Restore alles auf neuesten Stand bringen.

Dr. Bakterius

@christoph-g sagte in Backup wiederherstellen:

Habe aktuell nur nen Raspi 2 zur Hand

Da musst du dann wirklich viel Geduld aufbringen nach dem Restore. Es werden dann nämlich erst die ganzen Adapter neu installiert - und das dauert eben seine Zeit. Und unter Umständen wird dabei auch der RAM / Cache voll ausgelastet und der Restore klappt dann nicht vollständig. Vor allem wenn auch noch ein Desktop geladen werden muss. Also wie @Thomas-Braun schon schrieb: ein paar Euro für aktuellere Hardware in die Hand nehmen (und den Desktop weg lassen) ist sicher nicht verkehrt.

Du hast auch nicht die Langfassung von iob diag gezeigt, sondern die Kurzfassung. Und da sieht man schon, dass die web-Instanz nicht läuft - also auch keine VIS. Es wurde vermutlich auch noch kein Restore durchgeführt (bei lediglich 2 aktiven Instanzen). Und warum bist du im beta-Zweig unterwegs? Es stehen auch 139 Systemupdates an und ein Reboot wäre fällig. Beim nächsten Mal vor der Installation von ioBroker das System auf aktuellen Stand bringen (sudo apt-get update && upgrade).

Christoph G

@dr-bakterius said in Backup wiederherstellen:

Da musst du dann wirklich viel Geduld aufbringen nach dem Restore. Es werden dann nämlich erst die ganzen Adapter neu installiert - und das dauert eben seine Zeit. Und unter Umständen wird dabei auch der RAM / Cache voll ausgelastet und der Restore klappt dann nicht vollständig. Vor allem wenn auch noch ein Desktop geladen werden muss. Also wie @Thomas-Braun schon schrieb: ein paar Euro für aktuellere Hardware in die Hand nehmen (und den Desktop weg lassen) ist sicher nicht verkehrt.
Du hast auch nicht die Langfassung von iob diag gezeigt, sondern die Kurzfassung. Und da sieht man schon, dass die web-Instanz nicht läuft - also auch keine VIS. Es wurde vermutlich auch noch kein Restore durchgeführt (bei lediglich 2 aktiven Instanzen). Und warum bist du im beta-Zweig unterwegs? Es stehen auch 139 Systemupdates an und ein Reboot wäre fällig. Beim nächsten Mal vor der Installation von ioBroker das System auf aktuellen Stand bringen (sudo apt-get update && upgrade).

Christoph G

@christoph-g
Ich probiere gerade den js controller zu downgraden . Habe das mit

cd /opt/iobroker
iobroker fix
iobroker stop
npm i iobroker.js-controller@3.3.20 --production
iobroker start

Richtig?

Weil es danach nichtmehr lief.
Oder muss node js auch downgraden werden??

Gruß

Christoph G

@dr-bakterius
======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v7+
      Architecture: arm

Model           : Raspberry Pi 2 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 15:40:41 up  1:00,  1 user,  load average: 0.10, 0.03, 0.01
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2023-10-27 15:40:42 CEST
           Universal time: Fri 2023-10-27 13:40:42 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
budde
/home/budde
budde adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            921M        137M        628M        0.0K        155M        732M
Swap:            99M          0B         99M
Total:          1.0G        137M        728M

          921 M total memory
          138 M used memory
           91 M active memory
          153 M inactive memory
          628 M free memory
           28 M buffer memory
          126 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       57G  2.5G   52G   5% /
devtmpfs       devtmpfs  333M     0  333M   0% /dev
tmpfs          tmpfs     461M     0  461M   0% /dev/shm
tmpfs          tmpfs     185M  988K  184M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs      93M     0   93M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Oct 27 14:39:56 2023] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=de441372-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Oct 27 14:40:00 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Fri Oct 27 14:40:00 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Fri Oct 27 14:40:01 2023] EXT4-fs (mmcblk0p2): recovery complete
[Fri Oct 27 14:40:01 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Oct 27 14:40:01 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Oct 27 14:40:05 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
506M    /var/
247M    /var/cache
241M    /var/cache/apt
177M    /var/cache/apt/archives
94M     /var/lib

Archived and active journals take up 64.0M in the file system.

/opt/iobroker/backups:
3.4M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
72M     /opt/iobroker/iobroker-data/
58M     /opt/iobroker/iobroker-data/files
30M     /opt/iobroker/iobroker-data/files/web.admin/static
30M     /opt/iobroker/iobroker-data/files/web.admin
29M     /opt/iobroker/iobroker-data/files/web.admin/static/js

The five largest files in iobroker-data are:
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.8M    /opt/iobroker/iobroker-data/objects.jsonl
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  3.3.20
admin:          6.10.1
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
  system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable      : http://download.iobroker.net/sources-dist.json
beta        : http://download.iobroker.net/sources-dist-latest.json

Active repo: stable

Installed ioBroker-Instances
Used repository: stable
hash changed or no sources cached => force download of new sources
Cannot get any information of "_repoInfo". Ignored.
update done
Adapter    "admin"         : 6.12.0   , installed 6.10.1 [Updateable]
Adapter    "backitup"      : 2.8.1    , installed 2.8.1
Adapter    "discovery"     : 3.1.0    , installed 3.1.0
Controller "js-controller" : 5.0.12   , installed 3.3.20 [Updateable]
Adapter    "simple-api"    : 2.7.2    , installed 2.7.2
Adapter    "socketio"      : 6.5.5    , installed 6.5.5
Adapter    "vis"           : 1.4.16   , installed 1.4.16
Adapter    "web"           : 6.1.2    , installed 6.1.2
Adapter    "ws"            : 2.5.5    , installed 2.5.5

Objects and States
Please stand by - This may take a while
Objects:        170
States:         126

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       12550      521/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       12543      521/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12445      430/sshd: /usr/sbin
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       12665      591/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          12447      430/sshd: /usr/sbin
udp        0      0 0.0.0.0:33276           0.0.0.0:*                           108        11802      326/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          11101      490/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11800      326/avahi-daemon: r
udp6       0      0 :::39337                :::*                                108        11803      326/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        11801      326/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-10-27 14:40:48.475  - info: host.raspberrypi added notifications configuration of host
2023-10-27 14:40:49.789  - info: host.raspberrypi 5 instances found
2023-10-27 14:40:49.843  - info: host.raspberrypi starting 5 instances
2023-10-27 14:40:49.957  - error: host.raspberrypi startInstance system.adapter.admin.0 Invalid version of "js-controller". Installed "3.3.20", required ">=3.3.22
2023-10-27 14:40:53.977  - info: host.raspberrypi instance system.adapter.discovery.0 started with pid 539
2023-10-27 14:40:57.879  - error: host.raspberrypi startInstance system.adapter.backitup.0 Invalid version of "js-controller". Installed "3.3.20", required ">=4.0.0
2023-10-27 14:40:59.366  - error: discovery.0 (539) discovery.0 already running
2023-10-27 14:40:59.379  - warn: discovery.0 (539) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-10-27 14:41:00.052  - error: host.raspberrypi instance system.adapter.discovery.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-10-27 14:41:00.056  - info: host.raspberrypi Restart adapter system.adapter.discovery.0 because enabled
2023-10-27 14:41:01.972  - info: host.raspberrypi instance system.adapter.web.0 started with pid 550
2023-10-27 14:41:08.790  - error: web.0 (550) web.0 already running
2023-10-27 14:41:08.805  - warn: web.0 (550) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-10-27 14:41:09.523  - error: host.raspberrypi instance system.adapter.web.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-10-27 14:41:09.528  - info: host.raspberrypi Restart adapter system.adapter.web.0 because enabled
2023-10-27 14:41:11.811  - info: vis.0 (557) starting. Version 1.4.16 in /opt/iobroker/node_modules/iobroker.vis, node: v18.18.2, js-controller: 3.3.20
2023-10-27 14:41:11.984  - error: vis.0 (557) No license found for vis. Please get one on https://iobroker.net !
2023-10-27 14:41:12.990  - info: vis.0 (557) Terminated (NO_ERROR): Without reason
2023-10-27 14:41:13.657  - info: host.raspberrypi instance system.adapter.vis.0 terminated while should be started once
2023-10-27 14:41:30.121  - info: host.raspberrypi instance system.adapter.discovery.0 started with pid 576
2023-10-27 14:41:36.634  - info: discovery.0 (576) starting. Version 3.1.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.18.2, js-controller: 3.3.20
2023-10-27 14:41:39.586  - info: host.raspberrypi instance system.adapter.web.0 started with pid 591
2023-10-27 14:41:47.015  - info: web.0 (591) starting. Version 6.1.2 in /opt/iobroker/node_modules/iobroker.web, node: v18.18.2, js-controller: 3.3.20
2023-10-27 14:41:48.100  - info: web.0 (591) socket.io server listening on port 8082
2023-10-27 14:41:48.167  - info: web.0 (591) http server listening on port 8082

so sieht es gerade aus

Dr. Bakterius

@christoph-g Der admin-Adapter startet nicht, weil er zu neu für den js-controller v3.3.20 ist. Also eine frühere Version des admin-Adapters installieren oder eine js-controller-Version ab v3.3.22. Aus dem selben Grund startet auch der backitup-Adapter nicht. Der benötigt in der aktuellen Version js-controller-Version ab v4.0.0.

Christoph G

@dr-bakterius

super dankeschön
Ich werde es nächste Woche probieren und berichten!!

Christoph G

@dr-bakterius
Gibt es irgendwo eine Übersicht welcher admin bzw backitup adapter mit welcher js controller version funktioniert?

Dr. Bakterius

@christoph-g keine Ahnung, sorry.

DJMarc75

@christoph-g sagte in Backup wiederherstellen:

Gibt es irgendwo eine Übersicht welcher admin bzw backitup adapter mit welcher js controller version funktioniert?

Wenn Du auf Stable bist (was ich Dir anhand Deiner Frage empfehle) dann sind diese "stable" Versionen alle kompatibel.

Dr. Bakterius

@djmarc75 Er hat ja extra wegen dem Restore eines Systems welches offenbar schon länger kein Update bekommen hat den js-controller v3.3.20 installiert. Und damit ist schon mal der admin- und backitup-Adapter in der aktuellen stable nicht mehr kompatibel.

Dr. Bakterius

@christoph-g Vielleicht kann dir der Backup/Restore Guru @simatec weiterhelfen?

simatec

@dr-bakterius Backitup v2.6.9 unterstützt den alten js-controller noch

Dr. Bakterius

@christoph-g Also die benötigte backitup-Adapter Version kennst du jetzt. Beim admin-Adapter kann dir sicher @foxriver76 weiter helfen...

André Koschnik

Moin,

ich habe beim node.js update mein system zerschossen. Hab von node 16 auf 18 geupdated.
Habe dann mein system neu aufgesetzt und die backups vom dem gleichnamigen adapter wieder eingespielt. hat alles funktioniert bis auf beim postgres db.
Hab naturlich die aktulle version installiert --> bin jetzt wieder auf der vorherrigen version zurückgegangen und bekomme folgenden fehler:

Started restore ...
[DEBUG] [pgsql] - Start postgresql Restore ...
[ERROR] [pgsql] - Error: EPERM: operation not permitted, utime '/opt/iobroker/backups/pgsql_restore_backupiobroker.sql'
[ERROR] [pgsql] - postgresql Restore not completed
[EXIT]

mit psql geht auch nicht

sudo psql -U postgres anko_iobroker_v1 < pgsql_2023_10_30-02_40_33_backupiobroker.sql
psql: error: connection to server on socket "/var/run/postgresql/.s.PGSQL.5432" failed: FATAL:  Peer authentication failed for user "postgres"

verbindung ist aber offen

sudo psql --host=localhost --port=5432 --username=iobroker --password --dbname=anko_iobroker_v1
Password:
psql (13.12 (Debian 13.12-1.pgdg120+1))
SSL connection (protocol: TLSv1.3, cipher: TLS_AES_256_GCM_SHA384, bits: 256, compression: off)
Type "help" for help.

anko_iobroker_v1=# \q

pg_restore bring auch nen fehler.

hat eine/r ne idee.
gibts noch eine möglichkeit?

Thomas Braun

@andré-koschnik sagte in Backup wiederherstellen:

ch habe beim node.js update mein system zerschossen. Hab von node 16 auf 18 geupdated.

Wie schafft man das?
Wie bist du denn da nun unterwegs?

iob diag

anschauen.

André Koschnik

@thomas-braun

bin leider nicht so fit unter debin bin her ein mausschubser.
der iobroker hat eine neue node.js version empfohlen. apt update | apt upgrate hat aber nix geupated und dann hat google nicht immer gute tips gegeben.
Egal lauft ja alles wieder bis auf die daten in der db.

bin peer ssh auf dem bulleyes oder im webinterface des iob

Thomas Braun

@andré-koschnik

iob diag

sagt?

André Koschnik

postgresql.conf

pg_hba.conf

status postgres

André Koschnik

@thomas-braun said in Backup wiederherstellen:

iob diag


======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi6-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 12:30:07 up 22:12,  5 users,  load average: 0.90, 0.89, 0.75
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-11-09 12:30:07 CET
           Universal time: Thu 2023-11-09 11:30:07 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        2.3G        507M         23M        1.3G        1.7G
Swap:           104M        5.5M         99M
Total:          4.1G        2.3G        606M

         3792 M total memory
         2192 M used memory
         2221 M active memory
          829 M inactive memory
          483 M free memory
           26 M buffer memory
         1187 M swap cache
           99 M total swap
            5 M used swap
           94 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT                       LOAD   ACTIVE SUB    DESCRIPTION
* postgresql@13-main.service loaded failed failed PostgreSQL Cluster 13-main

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem                              Type      Size  Used Avail Use% Mounted on
udev                                    devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs                                   tmpfs     380M  1.4M  378M   1% /run
/dev/sda2                               ext4      235G  7.7G  215G   4% /
tmpfs                                   tmpfs     1.9G  4.3M  1.9G   1% /dev/shm
tmpfs                                   tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1                               vfat      510M   73M  438M  15% /boot/firmware
tmpfs                                   tmpfs     380M   36K  380M   1% /run/user/1000
//192.168.100.2/share/ioBrokerbackupDir cifs      5.4T  2.3T  3.2T  42% /opt/iobroker/backups

Messages concerning ext4 filesystem in dmesg:
[Wed Nov  8 14:17:42 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:54:39:F9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=20713d2e-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Nov  8 14:17:46 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Nov  8 14:17:48 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET                              SOURCE                                  FSTYPE      OPTIONS
/                                   /dev/sda2                               ext4        rw,noatime
|-/run/user/1000/doc                portal                                  fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
|-/boot/firmware                    /dev/sda1                               vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/opt/iobroker/backups             //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
  `-/opt/iobroker/backups           //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
    `-/opt/iobroker/backups         //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
      `-/opt/iobroker/backups       //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
        `-/opt/iobroker/backups     //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
          `-/opt/iobroker/backups   //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
            `-/opt/iobroker/backups //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

Files in neuralgic directories:

/var:
890M    /var/
463M    /var/cache
454M    /var/cache/apt
340M    /var/cache/apt/archives
248M    /var/lib

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
11G     /opt/iobroker/backups/
9.2G    /opt/iobroker/backups/1/iobroker/iobroker-tar-backup-20230129-122153
9.2G    /opt/iobroker/backups/1/iobroker
9.2G    /opt/iobroker/backups/1
84M     /opt/iobroker/backups/iobroker_2023_03_06-02_40_21_backupiobroker.tar

/opt/iobroker/iobroker-data:
255M    /opt/iobroker/iobroker-data/
171M    /opt/iobroker/iobroker-data/files
52M     /opt/iobroker/iobroker-data/files/javascript.admin
45M     /opt/iobroker/iobroker-data/files/devices.admin/static
45M     /opt/iobroker/iobroker-data/files/devices.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
27M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.eafddf6f.js.map
8.6M    /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.eafddf6f.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_36651404c719ec11b22276e5f01c6278-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0037-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.5.1
/usr/bin/node           v20.5.1
/usr/bin/npm            9.8.0
/usr/bin/npx            9.8.0
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 20.5.1-deb-1nodesource1
  Candidate: 20.5.1-deb-1nodesource1
  Version table:
 *** 20.5.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x bookworm/main arm64 Packages
        100 /var/lib/dpkg/status
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! missing: moment-parseformat@^4.0.0, required by iobroker.javascript@7.1.4

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-11-09T11_30_15_066Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.12.0
javascript:     7.1.4

Adapters from github:   1

Adapter State
+ system.adapter.accuweather.0            : accuweather           : iobroker                                 -  enabled
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.alexa2.1                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 - disabled
  system.adapter.discovery.0              : discovery             : iobroker                                 - disabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker                                 - disabled
+ system.adapter.go-e.0                   : go-e                  : iobroker                                 -  enabled
+ system.adapter.hue-extended.0           : hue-extended          : iobroker                                 -  enabled
  system.adapter.ical.1                   : ical                  : iobroker                                 -  enabled
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
  system.adapter.javascript.0             : javascript            : iobroker                                 - disabled
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.meater.0                 : meater                : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker                                 -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.parser.0                 : parser                : iobroker                                 -  enabled
+ system.adapter.pi-hole.0                : pi-hole               : iobroker                                 -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : iobroker                                 -  enabled
+ system.adapter.samsung.0                : samsung               : iobroker                                 -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : iobroker                                 -  enabled
  system.adapter.sql.0                    : sql                   : iobroker                                 - disabled, port: 5432
+ system.adapter.terminal.0               : terminal              : iobroker                                 -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.trashschedule.1          : trashschedule         : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
  system.adapter.web.0                    : web                   : iobroker                                 - disabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : iobroker                                 -  enabled
+ system.adapter.worx.0                   : worx                  : iobroker                                 -  enabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker                                 -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : iobroker                                 -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.3.1    , installed 1.3.1
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.25.2   , installed 3.25.2
Adapter    "backitup"     : 2.8.7    , installed 2.8.7
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "go-e"         : 1.0.27   , installed 1.0.28
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lovelace"     : 3.0.1    , installed 3.0.1
Adapter    "meater"       : 1.0.2    , installed 1.0.2
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "node-red"     : 4.0.3    , installed 4.0.3
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 6.5.5    , installed 6.5.7
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "trashschedule": 2.3.0    , installed 2.3.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "web"          : 6.1.4    , installed 6.1.4
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.5    , installed 2.5.7
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        12144
States:         9183

*** OS-Repositories and Updates ***
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://packages.grafana.com/oss/deb stable InRelease
Hit:6 https://deb.nodesource.com/node_20.x bookworm InRelease
Hit:7 https://apt.postgresql.org/pub/repos/apt bookworm-pgdg InRelease
Reading package lists...
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name  
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1938       819/sshd: /usr/sbin
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      999        19800      1452/pihole-FTL   
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          19860      1470/lighttpd     
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       19044      789/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       14231      789/iobroker.js-con
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          356850     63306/cupsd       
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      999        19806      1452/pihole-FTL   
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       21150      2537/io.mqtt.0    
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       609835     106360/node-red   
tcp6       0      0 :::22                   :::*                    LISTEN      0          1940       819/sshd: /usr/sbin
tcp6       0      0 :::53                   :::*                    LISTEN      999        19802      1452/pihole-FTL   
tcp6       0      0 :::80                   :::*                    LISTEN      0          19859      1470/lighttpd     
tcp6       0      0 ::1:4711                :::*                    LISTEN      999        19807      1452/pihole-FTL   
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          356849     63306/cupsd       
tcp6       0      0 :::3000                 :::*                    LISTEN      112        133357     24886/grafana     
tcp6       0      0 :::8091                 :::*                    LISTEN      1001       25648      2944/io.lovelace.0
tcp6       0      0 :::8090                 :::*                    LISTEN      1001       631380     106360/node-red   
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       25985      3106/io.terminal.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       215821     39107/io.admin.0  
tcp6       0      0 :::2011                 :::*                    LISTEN      1001       629991     106360/node-red   
tcp6       0      0 :::2010                 :::*                    LISTEN      1001       629973     106360/node-red   
tcp6       0      0 :::2009                 :::*                    LISTEN      1001       629975     106360/node-red   
tcp6       0      0 :::2008                 :::*                    LISTEN      1001       629977     106360/node-red   
tcp6       0      0 :::2007                 :::*                    LISTEN      1001       629989     106360/node-red   
tcp6       0      0 :::2006                 :::*                    LISTEN      1001       629987     106360/node-red   
tcp6       0      0 :::2005                 :::*                    LISTEN      1001       629985     106360/node-red   
tcp6       0      0 :::2004                 :::*                    LISTEN      1001       629983     106360/node-red   
tcp6       0      0 :::2003                 :::*                    LISTEN      1001       629979     106360/node-red   
tcp6       0      0 :::2002                 :::*                    LISTEN      1001       631382     106360/node-red   
tcp6       0      0 :::2001                 :::*                    LISTEN      1001       631384     106360/node-red   
tcp6       0      0 :::2000                 :::*                    LISTEN      1001       629981     106360/node-red   
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          356185     63324/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        13697      603/avahi-daemon: r
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       629993     106360/node-red   
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       629992     106360/node-red   
udp        0      0 0.0.0.0:53              0.0.0.0:*                           999        19799      1452/pihole-FTL   
udp        0      0 0.0.0.0:55396           0.0.0.0:*                           104        13699      603/avahi-daemon: r
udp6       0      0 fe80::f4dc:1a48:40a:546 :::*                                0          17893      756/NetworkManager
udp6       0      0 :::47665                :::*                                104        13700      603/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        13698      603/avahi-daemon: r
udp6       0      0 :::53                   :::*                                999        19801      1452/pihole-FTL   

*** Log File - Last 25 Lines ***

2023-11-09 12:12:45.260  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:14:02.441  - info: smartmeter.0 (2697) Received 351 values, 1 updated
2023-11-09 12:15:19.701  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:16:37.058  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:17:54.089  - info: smartmeter.0 (2697) Received 351 values, 4 updated
2023-11-09 12:19:11.274  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:20:28.407  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:21:45.645  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:22:03.305  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:22:26.668  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:22:28.653  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:22:28.994  - info: zigbee.0 (2757) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"36651404c719ec11b22276e5f01c6278","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_36651404c719ec11b22276e5f01c6278-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyUSB1","manufacturer":"Silicon Labs","serialNumber":"0037","pnpId":"usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0037-if00-port0","vendorId":"10c4","productId":"ea60"}]
2023-11-09 12:23:02.860  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:23:28.510  - error: zigbee.0 (2757) Send command to 0xa4c138ab4e1a5a57 failed with no error code (undefined)
2023-11-09 12:23:49.390  - error: zigbee.0 (2757) Send command to 0xa4c138aadf131aa8 failed with no error code (undefined)
2023-11-09 12:23:52.068  - error: zigbee.0 (2757) Send command to 0xa4c138aadf131aa8 failed with no error code (undefined)
2023-11-09 12:23:55.604  - error: zigbee.0 (2757) Send command to 0xa4c138ab4e1a5a57 failed with no error code (undefined)
2023-11-09 12:24:20.139  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:24:59.312  - info: admin.0 (39107) <== Disconnect system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:25:00.815  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:25:37.319  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:26:54.526  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:28:11.561  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:29:28.694  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:30:45.784  - info: smartmeter.0 (2697) Received 351 values, 2 updated

============ Mark until here for C&P =============

iob diag has finished.

NEWS

Backup wiederherstellen

Backup wiederherstellen

Support us

366

32.4k

81.3k

1.3m