UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Frederik Buss]

@schtallone Dein Load ist immer noch zu hoch. Wie vorher schon geschrieben liegt die Vermutung nahe, dass es nicht der iobroker Container ist, der das verursacht. Ich würde grundlegender anfangen und alle Container deaktivieren, Load für ein paar Minuten anzeigen lassen und sukzessive Container aktivieren und den Load betrachten. Sonst kommst Du denke ich nie an die eigentliche Ursache.

[Schtallone]

@dp20eic ja, alles aktuell

[Ein ehemaliger Benutzer]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15

Moin,

kannst Du mal Docker stoppen und schauen, ob der load avarage auf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch per ssh einloggen, dann kannst Du da auch TOP nutzen.

VG
Bernd

[DJMarc75]

@schtallone hast Du den dubiosen JD2 Container immernoch aus ? ;)

[Schtallone]

@djmarc75 ja

[Schtallone]

@dp20eic said in Performance Probleme durch Shelly Adapter?:

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15

Moin,

kannst Du mal Docker stoppen und schauen, ob der load avarage auf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch per ssh einloggen, dann kannst Du da auch TOP nutzen.

VG
Bernd

Mittel SSH (Putty) und top

Vor dem Stop der Container-Station:

Mem: 4056084K used, 3923148K free, 399060K shrd, 462308K buff, 898664K cached
CPU:  0.0% usr 50.0% sys  0.0% nic 50.0% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 4.20 4.25 4.16 6/1289 29424
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
    1     0 admin    S     7756  0.1   0  0.0 init
    2     0 admin    SW       0  0.0   0  0.0 [kthreadd]
    3     2 admin    IW<      0  0.0   0  0.0 [rcu_gp]
    4     2 admin    IW<      0  0.0   0  0.0 [rcu_par_gp]
    8     2 admin    IWN      0  0.0   0  0.0 [mm_percpu_wq]
    9     2 admin    SW       0  0.0   0  0.0 [ksoftirqd/0]
   10     2 admin    IW       0  0.0   0  0.0 [rcu_sched]
   11     2 admin    SW       0  0.0   0  0.0 [migration/0]
   13     2 admin    SWN      0  0.0   0  0.0 [cpuhp/0]
   14     2 admin    SWN      0  0.0   1  0.0 [cpuhp/1]
   15     2 admin    SW       0  0.0   1  0.0 [migration/1]
   16     2 admin    SW       0  0.0   1  0.0 [ksoftirqd/1]
   19     2 admin    SW       0  0.0   0  0.0 [kdevtmpfs]
   20     2 admin    IW<      0  0.0   1  0.0 [netns]
   25     2 admin    SW       0  0.0   0  0.0 [kauditd]
  586     2 admin    SW       0  0.0   1  0.0 [khungtaskd]
  587     2 admin    SW       0  0.0   0  0.0 [oom_reaper]
  588     2 admin    IW<      0  0.0   1  0.0 [writeback]
  590     2 admin    SW       0  0.0   0  0.0 [kcompactd0]
  591     2 admin    SWN      0  0.0   0  0.0 [ksmd]
  605     2 admin    IW<      0  0.0   0  0.0 [cryptd]
  632     2 admin    IW<      0  0.0   1  0.0 [kintegrityd]
  633     2 admin    IW<      0  0.0   0  0.0 [kblockd]
  634     2 admin    IW<      0  0.0   1  0.0 [blkcg_punt_bio]
  760     1 admin    S     165m  2.1   0  0.0 python /usr/local/network/nmd/nmd.pyc
  775     1 admin    S    23040  0.2   1  0.0 {qmmsd} python /usr/local/network/nmd/nmd.pyc
  853     2 admin    IW<      0  0.0   0  0.0 [tifm]
  860     2 admin    IW<      0  0.0   1  0.0 [ata_sff]
  880     2 admin    IW<      0  0.0   0  0.0 [md]
  899     2 admin    SW       0  0.0   0  0.0 [watchdogd]
  955     1 admin    S     147m  1.8   1  0.0 ./Plex Media Server
  998     2 admin    IW<      0  0.0   0  0.0 [rpciod]
  999     2 admin    IW<      0  0.0   0  0.0 [kworker/u9:0-i9]
 1000     2 admin    IW<      0  0.0   0  0.0 [xprtiod]
 1037     2 admin    SW       0  0.0   1  0.0 [kswapd0]
 1038     2 admin    SW       0  0.0   0  0.0 [ecryptfs-kthrea]
 1041     2 admin    IW<      0  0.0   1  0.0 [nfsiod]
 1042     2 admin    IW<      0  0.0   0  0.0 [cifsiod]
 1043     2 admin    IW<      0  0.0   0  0.0 [smb3decryptd]
 1044     2 admin    IW<      0  0.0   0  0.0 [cifsfileinfoput]
 1045     2 admin    IW<      0  0.0   0  0.0 [cifsoplockd]
 1050     2 admin    IW<      0  0.0   0  0.0 [kthrotld]
 1114     2 admin    SW       0  0.0   1  0.0 [card0-crtc0]
 1115     2 admin    SW       0  0.0   0  0.0 [card0-crtc1]
 1116     2 admin    SW       0  0.0   0  0.0 [card0-crtc2]
 1127   955 admin    S N  64540  0.8   0  0.0 {Plex Script Hos} Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle
 1725     2 admin    IW<      0  0.0   0  0.0 [kmpath_rdacd]
 1732     2 admin    IW<      0  0.0   0  0.0 [nvme-wq]
 1734     2 admin    IW<      0  0.0   0  0.0 [nvme-reset-wq]
 1736     2 admin    IW<      0  0.0   0  0.0 [nvme-delete-wq]
 1747     2 admin    SW       0  0.0   1  0.0 [scsi_eh_0]
 1748     2 admin    IW<      0  0.0   0  0.0 [scsi_tmf_0]
 1752     2 admin    SW       0  0.0   0  0.0 [scsi_eh_1]
 1753     2 admin    IW<      0  0.0   0  0.0 [scsi_tmf_1]
 1796     2 admin    SW       0  0.0   0  0.0 [rc0]
 1801     2 admin    IW<      0  0.0   1  0.0 [raid5wq]
 1803     2 admin    IW<      0  0.0   0  0.0 [dm-block-clone]
 1805     2 admin    IW<      0  0.0   1  0.0 [dm_bufio_cache]
 1806     2 admin    IW<      0  0.0   0  0.0 [kmpathd]
 1807     2 admin    IW<      0  0.0   0  0.0 [kmpath_handlerd]
 1813     2 admin    IW<      0  0.0   1  0.0 [sdhci]
 1814     2 admin    SW       0  0.0   0  0.0 [irq/39-mmc0]
 1871     2 admin    IW<      0  0.0   1  0.0 [zswap-shrink]
 1873     2 admin    IW<      0  0.0   1  0.0 [mmc_complete]
 1997     2 admin    IW<      0  0.0   1  0.0 [uas]
 2200     1 admin    S     698m  8.9   0  0.0 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-station/etc/supervisord.conf -d
 2274  2200 admin    S    38792  0.4   0  0.0 container-station/redis-server *:0
 2289     2 admin    IW<      0  0.0   0  0.0 [kcopyd]
 2290     2 admin    IW<      0  0.0   1  0.0 [kcopyd_tracked]
 2302     2 admin    IW<      0  0.0   0  0.0 [drbd-reissue]
 2466     1 admin    S    15124  0.1   1  0.0 udevd --daemon
 2843  2200 admin    S    1385m 17.7   0  0.0 container-station/dockerd -H unix:///var/run/system-docker.sock --bridge=docker0 --storage-driver=overlay2 --dns 10.0.5.1 --data-root=/var/lib/system-docker --exec-root=/var/run/system-docker --pidfile=/var/run/system-docker.pid -D --userland-proxy=false --config-file /share/CACHEDEV1_DATA/.qpkg/container-station/etc/system-docker.json
 2873  2843 admin    S    1302m 16.6   1  0.0 container-station/containerd --config /var/run/system-docker/containerd/containerd.toml --log-level debug
 2887  2200 admin    S    4362m 55.8   1  0.0 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station
 3052  2200 admin    S    1911m 24.4   0  0.0 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --bridge=lxcbr0 --tlsverify --tlscacert=/etc/docker/tls/ca.pem --tlscert=/etc/docker/tls/server.pem --tlskey=/etc/docker/tls/server-key.pem --storage-driver=overlay2 --dns 10.0.3.1 --data-root=/var/lib/docker --exec-root=/var/run/docker --pidfile=/var/run/docker.pid -D --userland-proxy=false --config-
 3100  2200 admin    S    1499m 19.1   1  0.0 container-station/lxd
 3101  3052 admin    S    1375m 17.5   1  0.0 container-station/containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
 3215     2 admin    SW       0  0.0   0  0.0 [md9_raid1]
 3228     2 admin    SW       0  0.0   0  0.0 [jbd2/md9-8]
 3229     2 admin    IW<      0  0.0   1  0.0 [ext4-rsv-conver]
 3237   955 admin    S    41212  0.5   1  0.0 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600
 3239     2 admin    SW       0  0.0   1  0.0 [md13_raid1]

NAch Stop der Container-Station

Mem: 4409348K used, 3569884K free, 399108K shrd, 1484984K buff, 545384K cached
CPU: 20.0% usr 19.2% sys  1.2% nic 59.3% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 2.14 3.08 3.78 9/1123 11343
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
 5479     2 admin    RW       0  0.0   1  5.0 [notify thread]
 3441     1 admin    S    1326m 16.9   0  2.6 /sbin/hal_daemon -f
32076     2 admin    IW       0  0.0   0  1.4 [kworker/0:0-kac]
 8632     2 admin    IW       0  0.0   1  1.1 [kworker/1:5-fno]
31533     2 admin    IW       0  0.0   1  0.8 [kworker/1:0-eve]
15037     2 admin    DW       0  0.0   0  0.6 [kworker/0:75+pm]
15069     2 admin    IW       0  0.0   0  0.4 [kworker/0:95-ka]
13304     1 admin    S     424m  5.4   1  0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4
10394     1 admin    S     222m  2.8   0  0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py
 7597     1 admin    S    41708  0.5   0  0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0
 6268 18618 admin    S <  2189m 28.0   0  0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf
14488     1 admin    S    1397m 17.8   1  0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/python/bin/cc3-fastcgi -w /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3 start
12222 11744 admin    S     882m 11.2   1  0.1 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.system/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.system/tmp --log-error=/share/CACHEDEV1_DATA/.system/data/QNAP-TS251D.err --pid-file
 7559     1 admin    S     559m  7.1   0  0.1 /mnt/ext/opt/Python/bin/python ./manage.pyc runfcgi method=threaded socket=/tmp/netmgr.sock pidfile=/tmp/netmgr.pid errlog=/tmp/nvs-django-e.log outlog=/tmp/nvs-django-o.log
16003     1 admin    S     382m  4.9   0  0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app qufirewall-monitor start
 4487     1 admin    S     239m  3.0   1  0.1 /sbin/lvmetad
 8545  8463 admin    S     222m  2.8   0  0.1 {gwd} python /usr/local/network/nmd/nmd.pyc
 8493  8463 admin    S     219m  2.8   0  0.1 {ncaas} python /usr/local/network/nmd/nmd.pyc
10072 22367 admin    S     176m  2.2   0  0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bilder/Bilder Unsortiert/ -filter:0x400 -root_event -dbdir:/share/CACHEDEV1_DATA/.system/qmonitor/dbdir
32102     1 admin    S     114m  1.4   0  0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_folder -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b
21706 20140 admin    S    88172  1.1   0  0.1 sshd: admin@pts/1
22664     1 admin    S    84952  1.0   0  0.1 /sbin/rfsd -i -f /etc/rfsd.conf
11426     1 admin    S    74752  0.9   1  0.1 /sbin/vdd_control -d
 3237   955 admin    S    41212  0.5   0  0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600
29203     1 admin    S    20692  0.2   1  0.1 {qdesk_soldier} /bin/sh /sbin/qdesk_soldier
10947 24645 admin    R    16180  0.2   1  0.1 top
21295 21014 admin    S    2463m 31.5   1  0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaults-file=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/my.cnf --basedir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10 --datadir=/share/CACHEDEV1_DATA/.system/data.m10 --plugin-dir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/lib/plugin --user=admin --tmpdir=/share/CACHEDEV1_DATA/.sys
17255 16150 httpdusr S    2180m 27.8   1  0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc/config/apache/apache.conf
 6809 20178 admin    S    1360m 17.4   0  0.0 /usr/local/apache/bin/apache_proxys -k start -f /etc/apache-sys-proxy-ssl.conf
14539 14537 admin    S    1212m 15.5   1  0.0 /usr/local/sbin/ncd
13710     1 admin    S    1196m 15.3   1  0.0 /usr/local/sbin/qulogdb --defaults-file=/mnt/ext/opt/QuLog/etc/qulog-mariadb.conf
26954 26952 admin    S    1051m 13.4   0  0.0 /usr/bin/qDmcd
31913 31423 admin    S     865m 11.0   1  0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qbox-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qbox/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qbox/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qbox/mysql/data/QNAP-TS251D.err --pid-file
26094 25688 admin    S     857m 10.9   1  0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qcoolie-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qcoolie/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qcoolie/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qcoolie/mysql/data/QNAP-TS251D.er
29133     1 admin    S N   830m 10.6   0  0.0 /usr/local/medialibrary/bin/myidbserver -d
22367     1 admin    S     766m  9.8   0  0.0 /usr/local/medialibrary/bin/mymediadbserver -t -d -i -1
10610     1 admin    S     704m  9.0   0  0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080
10603     1 admin    S     704m  9.0   1  0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080
22489     1 admin    S     549m  7.0   1  0.0 /sbin/upnpd br0 br0
14499     1 admin    S     507m  6.5   0  0.0 /usr/local/sbin/ncdb --defaults-file=/mnt/ext/opt/NotificationCenter/etc/nc-mariadb.conf
 9830     1 admin    S     440m  5.6   0  0.0 /mnt/ext/opt/Python/bin/python /mnt/ext/opt/netmgr/api service ip_monitor start
19033 19030 admin    S     431m  5.5   1  0.0 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/
17787     1 admin    S     401m  5.1   1  0.0 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app api start
28520 17710 Peter Pa S     383m  4.9   0  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
 7232     1 admin    S     360m  4.6   1  0.0 {php-fpm-proxy} php-fpm: master process (/etc/php-fpm-sys-proxy.conf)
 7236  7232 admin    S     360m  4.6   0  0.0 {php-fpm-proxy} php-fpm: pool www
 7237  7232 admin    S     360m  4.6   1  0.0 {php-fpm-proxy} php-fpm: pool www
16091     1 admin    S     360m  4.6   0  0.0 {php-fpm-qweb} php-fpm: master process (/etc/config/apache/php-fpm-qweb.conf)
16092 16091 httpdusr S     360m  4.6   1  0.0 {php-fpm-qweb} php-fpm: pool www
16093 16091 httpdusr S     360m  4.6   1  0.0 {php-fpm-qweb} php-fpm: pool www
 7158     1 admin    S     359m  4.6   1  0.0 {qumagie-php-fpm} php-fpm: master process (/share/CACHEDEV1_DATA/.qpkg/qumagie/v2.1.2/php-fpm-qumagie.conf)
17720 17710 admin    S     355m  4.5   1  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17710     1 admin    S     350m  4.4   0  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17718 17710 admin    S     349m  4.4   1  0.0 {cleanupd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17717 17710 admin    S     349m  4.4   1  0.0 {smbd-notifyd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
13801 13794 admin    S     341m  4.3   0  0.0 /usr/local/sbin/qulogd
26414     1 admin    S     336m  4.3   0  0.0 /usr/local/sbin/pp_qcoolied -f /etc/config/pp_qcoolie/qcoolie.conf
28267     1 admin    S     336m  4.3   0  0.0 tunnelagent
26936 26934 admin    S     325m  4.1   1  0.0 /usr/local/medialibrary/bin/myupnpmediasvr
17648 17621 admin    S <   316m  4.0   1  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
 5756     1 admin    S     312m  4.0   0  0.0 /sbin/cs_qdaemon
17621     1 admin    S <   308m  3.9   1  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
17719 17621 admin    S <   308m  3.9   0  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
32137     1 admin    S     306m  3.9   1  0.0 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b
19516     1 admin    S     302m  3.8   1  0.0 /sbin/multipathd
 8494  8463 admin    S     293m  3.7   1  0.0 {qserviced} python /usr/local/network/nmd/nmd.pyc
32046     1 admin    S     280m  3.5   1  0.0 /sbin/qsyncsrv_dbm -b
17751     1 admin    S     252m  3.2   1  0.0 /usr/local/samba/sbin/nmbd -l /var/log -D -s /etc/config/smb.conf
22937     1 admin    S     237m  3.0   1  0.0 /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/
23781     1 admin    S     227m  2.9   0  0.0 /sbin/qShield
22703     1 admin    S     226m  2.9   0  0.0 /usr/local/bin/rfsd_qmonitor -f:/tmp/rfsd_qmonitor.conf
 8547  8463 admin    S     219m  2.8   0  0.0 {ressd} python /usr/local/network/nmd/nmd.pyc
23772     1 admin    S     219m  2.8   1  0.0 qLogEngined: Write log is enabled...
19499     1 admin    S     211m  2.7   0  0.0 /usr/local/medialibrary/bin/myconvertserver -d
 6264  6082 admin    S <   207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6578  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6084  6082 admin    S <   207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6759  6082 admin    S <   207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6803  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6962  6082 admin    S <   207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 7060  6576 admin    S     207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 7220  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi

[Ein ehemaliger Benutzer]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

CPU: 0.0% usr 50.0% sys 0.0% nic 50.0%

Moin,

User Prozesse nutzen 50 % und NIC 50 %
Da läuft was ganz Seltsames.

Bei mir sieht das so aus
%Cpu(s):
8.9 usr,
5.9 sys,
0.0 nic,
84.7 idel,
0.5 wait,

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0%

Jetzt kommt da mal Ruhe rein, wobei mich das mit NIC ~60 % immer noch stutzig macht und das die Maschine nicht in den Idel kommt, da ist in der Grundinstallation was schräg.

Wann wurde die QNAP das letzte Mal sauber heruntergefahren und neu gestartet?

VG
Bernd

P.S.: redis? Mal die Ausgabe nach CPU sortieren.

[Schtallone]

@dp20eic said in Performance Probleme durch Shelly Adapter?:

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

CPU: 0.0% usr 50.0% sys 0.0% nic 50.0%

das ist ja eine Momentaufnahme und kein average Wert, oder?

Moin,

User Prozesse nutzen 50 % und NIC 50 %
Da läuft was ganz Seltsames.

Bei mir sieht das so aus
%Cpu(s):
8.9 usr,
5.9 sys,
0.0 nic,
84.7 idel,
0.5 wait,

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0%

Jetzt kommt da mal ruhe rein, wobei mich das mit NIC ~60 % immer noch stutzig macht und das die Maschine nicht in den Idel kommt, da ist in der Grundinstallation was schräg.

Wann wurde die QNAP das letzte Mal sauber heruntergefahren und neu gestartet?

gestern

VG
Bernd

[Ein ehemaliger Benutzer]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

das ist ja eine Momentaufnahme und kein average Wert, oder?

Moin,

ja, aber bei mir auch und bei mir läuft alles und nichts ist angehalten, und trotzdem komme ich nicht annähernd auf solche Werte wie bei Du auf der QNAP.
Gut, kann man jetzt auch nicht 1:1 vergleichen, da sich die CPUs vielleicht unterscheiden, bei mir

DS716+II 	Intel Celeron N3160 	4 Kerne 	4 Threads

VG
Bernd

[Schtallone]

@dp20eic aktuell schwakt es in Putty CPU zwischen ca. 10 unud 30% (aktualisierung alle 5 sekunden oder so)

[Ein ehemaliger Benutzer]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Moin,

was ist denn das alles?

13304     1 admin    S     424m  5.4   1  0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4
10394     1 admin    S     222m  2.8   0  0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py
 7597     1 admin    S    41708  0.5   0  0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0
 6268 18618 admin    S <  2189m 28.0   0  0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf
14488     1 admin    S    1397m 17.8   1  0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/pyt

Python, tutk_agent, Redis?

VG
Bernd

[Schtallone]

@dp20eic

Da bin ich detail überfragt, es laufen ja einige systemseitige Prozesse der QNAP..

jetzt sieht es gerade so aus:

Mem: 7295456K used, 683776K free, 399416K shrd, 1253444K buff, 2503808K cached
CPU: 23.4% usr 26.0% sys  2.2% nic 48.0% idle  0.0% io  0.0% irq  0.2% sirq
Load average: 3.64 4.11 4.59 3/1369 12369
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
 5479     2 admin    SW       0  0.0   1  6.5 [notify thread]
 3441     1 admin    S    1326m 16.9   1  4.7 /sbin/hal_daemon -f
 9038     2 admin    IW       0  0.0   1  1.8 [kworker/1:2-fno]
26170     2 admin    IW       0  0.0   0  1.4 [kworker/0:0-kac]
 4441  2996 Peter Pa S     704m  9.0   1  0.8 io.shelly.0
29898     2 admin    IW       0  0.0   0  0.8 [kworker/0:2-fno]
 2996 31990 Peter Pa R   11405m145.9   1  0.6 iobroker.js-controller
 9734     2 admin    DW       0  0.0   0  0.6 [kworker/0:3+pm]
18549 18618 admin    S <  2189m 28.0   0  0.4 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf
19283 18513 admin    S    2026m 25.9   1  0.4 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station
 6150  2996 Peter Pa S     689m  8.8   1  0.3 io.mqtt.0
 3038     2 admin    IW       0  0.0   1  0.3 [kworker/1:0-fno]
19444 18513 admin    S    1941m 24.8   1  0.2 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.soc
18513     1 admin    S     698m  8.9   1  0.2 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-statio
19033 19030 admin    S     495m  6.3   0  0.2 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/
13304     1 admin    S     424m  5.4   1  0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4
32137     1 admin    S     306m  3.9   1  0.2 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recent
10394     1 admin    S     222m  2.8   0  0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py
19506 19444 admin    S    1446m 18.5   1  0.1 container-station/containerd --config /var/run/docker/containerd/containerd.t
16003     1 admin    S     382m  4.9   1  0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app quf
10072 22367 admin    S     176m  2.2   1  0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bil
32102     1 admin    S     114m  1.4   1  0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_f
22664     1 admin    S    84952  1.0   0  0.1 /sbin/rfsd -i -f /etc/rfsd.conf
 3237   955 admin    S    41212  0.5   1  0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDE
21946     1 guest    S    30660  0.3   1  0.1 avahi-daemon: running [QNAP-TS251D.local]
11909  1436 admin    R    16180  0.2   1  0.1 top
   10     2 admin    IW       0  0.0   1  0.1 [rcu_sched]
    9     2 admin    SW       0  0.0   0  0.1 [ksoftirqd/0]
 4453  2996 Peter Pa S   10914m139.6   0  0.0 io.backitup.0
21295 21014 admin    S    2463m 31.5   0  0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaul
17255 16150 httpdusr S    2180m 27.8   1  0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc

[Homoran]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

jetzt sieht es gerade so aus:

immer noch viel zu hoch

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Load average: 3.64 4.11 4.59 3/1369 12369

hast du nicht

@frederik-buss sagte in Performance Probleme durch Shelly Adapter?:

grundlegender anfangen und alle Container deaktivieren

da laufen immer noch iob Prozesse

[Schtallone]

@schtallone said in Performance Probleme durch Shelly Adapter?:

@dp20eic said in Performance Probleme durch Shelly Adapter?:

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15

Moin,

kannst Du mal Docker stoppen und schauen, ob der load avarage auf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch per ssh einloggen, dann kannst Du da auch TOP nutzen.

VG
Bernd

Mittel SSH (Putty) und top

Vor dem Stop der Container-Station:

Mem: 4056084K used, 3923148K free, 399060K shrd, 462308K buff, 898664K cached
CPU:  0.0% usr 50.0% sys  0.0% nic 50.0% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 4.20 4.25 4.16 6/1289 29424
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
    1     0 admin    S     7756  0.1   0  0.0 init
    2     0 admin    SW       0  0.0   0  0.0 [kthreadd]
    3     2 admin    IW<      0  0.0   0  0.0 [rcu_gp]
    4     2 admin    IW<      0  0.0   0  0.0 [rcu_par_gp]
    8     2 admin    IWN      0  0.0   0  0.0 [mm_percpu_wq]
    9     2 admin    SW       0  0.0   0  0.0 [ksoftirqd/0]
   10     2 admin    IW       0  0.0   0  0.0 [rcu_sched]
   11     2 admin    SW       0  0.0   0  0.0 [migration/0]
   13     2 admin    SWN      0  0.0   0  0.0 [cpuhp/0]
   14     2 admin    SWN      0  0.0   1  0.0 [cpuhp/1]
   15     2 admin    SW       0  0.0   1  0.0 [migration/1]
   16     2 admin    SW       0  0.0   1  0.0 [ksoftirqd/1]
   19     2 admin    SW       0  0.0   0  0.0 [kdevtmpfs]
   20     2 admin    IW<      0  0.0   1  0.0 [netns]
   25     2 admin    SW       0  0.0   0  0.0 [kauditd]
  586     2 admin    SW       0  0.0   1  0.0 [khungtaskd]
  587     2 admin    SW       0  0.0   0  0.0 [oom_reaper]
  588     2 admin    IW<      0  0.0   1  0.0 [writeback]
  590     2 admin    SW       0  0.0   0  0.0 [kcompactd0]
  591     2 admin    SWN      0  0.0   0  0.0 [ksmd]
  605     2 admin    IW<      0  0.0   0  0.0 [cryptd]
  632     2 admin    IW<      0  0.0   1  0.0 [kintegrityd]
  633     2 admin    IW<      0  0.0   0  0.0 [kblockd]
  634     2 admin    IW<      0  0.0   1  0.0 [blkcg_punt_bio]
  760     1 admin    S     165m  2.1   0  0.0 python /usr/local/network/nmd/nmd.pyc
  775     1 admin    S    23040  0.2   1  0.0 {qmmsd} python /usr/local/network/nmd/nmd.pyc
  853     2 admin    IW<      0  0.0   0  0.0 [tifm]
  860     2 admin    IW<      0  0.0   1  0.0 [ata_sff]
  880     2 admin    IW<      0  0.0   0  0.0 [md]
  899     2 admin    SW       0  0.0   0  0.0 [watchdogd]
  955     1 admin    S     147m  1.8   1  0.0 ./Plex Media Server
  998     2 admin    IW<      0  0.0   0  0.0 [rpciod]
  999     2 admin    IW<      0  0.0   0  0.0 [kworker/u9:0-i9]
 1000     2 admin    IW<      0  0.0   0  0.0 [xprtiod]
 1037     2 admin    SW       0  0.0   1  0.0 [kswapd0]
 1038     2 admin    SW       0  0.0   0  0.0 [ecryptfs-kthrea]
 1041     2 admin    IW<      0  0.0   1  0.0 [nfsiod]
 1042     2 admin    IW<      0  0.0   0  0.0 [cifsiod]
 1043     2 admin    IW<      0  0.0   0  0.0 [smb3decryptd]
 1044     2 admin    IW<      0  0.0   0  0.0 [cifsfileinfoput]
 1045     2 admin    IW<      0  0.0   0  0.0 [cifsoplockd]
 1050     2 admin    IW<      0  0.0   0  0.0 [kthrotld]
 1114     2 admin    SW       0  0.0   1  0.0 [card0-crtc0]
 1115     2 admin    SW       0  0.0   0  0.0 [card0-crtc1]
 1116     2 admin    SW       0  0.0   0  0.0 [card0-crtc2]
 1127   955 admin    S N  64540  0.8   0  0.0 {Plex Script Hos} Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle
 1725     2 admin    IW<      0  0.0   0  0.0 [kmpath_rdacd]
 1732     2 admin    IW<      0  0.0   0  0.0 [nvme-wq]
 1734     2 admin    IW<      0  0.0   0  0.0 [nvme-reset-wq]
 1736     2 admin    IW<      0  0.0   0  0.0 [nvme-delete-wq]
 1747     2 admin    SW       0  0.0   1  0.0 [scsi_eh_0]
 1748     2 admin    IW<      0  0.0   0  0.0 [scsi_tmf_0]
 1752     2 admin    SW       0  0.0   0  0.0 [scsi_eh_1]
 1753     2 admin    IW<      0  0.0   0  0.0 [scsi_tmf_1]
 1796     2 admin    SW       0  0.0   0  0.0 [rc0]
 1801     2 admin    IW<      0  0.0   1  0.0 [raid5wq]
 1803     2 admin    IW<      0  0.0   0  0.0 [dm-block-clone]
 1805     2 admin    IW<      0  0.0   1  0.0 [dm_bufio_cache]
 1806     2 admin    IW<      0  0.0   0  0.0 [kmpathd]
 1807     2 admin    IW<      0  0.0   0  0.0 [kmpath_handlerd]
 1813     2 admin    IW<      0  0.0   1  0.0 [sdhci]
 1814     2 admin    SW       0  0.0   0  0.0 [irq/39-mmc0]
 1871     2 admin    IW<      0  0.0   1  0.0 [zswap-shrink]
 1873     2 admin    IW<      0  0.0   1  0.0 [mmc_complete]
 1997     2 admin    IW<      0  0.0   1  0.0 [uas]
 2200     1 admin    S     698m  8.9   0  0.0 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-station/etc/supervisord.conf -d
 2274  2200 admin    S    38792  0.4   0  0.0 container-station/redis-server *:0
 2289     2 admin    IW<      0  0.0   0  0.0 [kcopyd]
 2290     2 admin    IW<      0  0.0   1  0.0 [kcopyd_tracked]
 2302     2 admin    IW<      0  0.0   0  0.0 [drbd-reissue]
 2466     1 admin    S    15124  0.1   1  0.0 udevd --daemon
 2843  2200 admin    S    1385m 17.7   0  0.0 container-station/dockerd -H unix:///var/run/system-docker.sock --bridge=docker0 --storage-driver=overlay2 --dns 10.0.5.1 --data-root=/var/lib/system-docker --exec-root=/var/run/system-docker --pidfile=/var/run/system-docker.pid -D --userland-proxy=false --config-file /share/CACHEDEV1_DATA/.qpkg/container-station/etc/system-docker.json
 2873  2843 admin    S    1302m 16.6   1  0.0 container-station/containerd --config /var/run/system-docker/containerd/containerd.toml --log-level debug
 2887  2200 admin    S    4362m 55.8   1  0.0 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station
 3052  2200 admin    S    1911m 24.4   0  0.0 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --bridge=lxcbr0 --tlsverify --tlscacert=/etc/docker/tls/ca.pem --tlscert=/etc/docker/tls/server.pem --tlskey=/etc/docker/tls/server-key.pem --storage-driver=overlay2 --dns 10.0.3.1 --data-root=/var/lib/docker --exec-root=/var/run/docker --pidfile=/var/run/docker.pid -D --userland-proxy=false --config-
 3100  2200 admin    S    1499m 19.1   1  0.0 container-station/lxd
 3101  3052 admin    S    1375m 17.5   1  0.0 container-station/containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
 3215     2 admin    SW       0  0.0   0  0.0 [md9_raid1]
 3228     2 admin    SW       0  0.0   0  0.0 [jbd2/md9-8]
 3229     2 admin    IW<      0  0.0   1  0.0 [ext4-rsv-conver]
 3237   955 admin    S    41212  0.5   1  0.0 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600
 3239     2 admin    SW       0  0.0   1  0.0 [md13_raid1]

NAch Stop der Container-Station

Mem: 4409348K used, 3569884K free, 399108K shrd, 1484984K buff, 545384K cached
CPU: 20.0% usr 19.2% sys  1.2% nic 59.3% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 2.14 3.08 3.78 9/1123 11343
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
 5479     2 admin    RW       0  0.0   1  5.0 [notify thread]
 3441     1 admin    S    1326m 16.9   0  2.6 /sbin/hal_daemon -f
32076     2 admin    IW       0  0.0   0  1.4 [kworker/0:0-kac]
 8632     2 admin    IW       0  0.0   1  1.1 [kworker/1:5-fno]
31533     2 admin    IW       0  0.0   1  0.8 [kworker/1:0-eve]
15037     2 admin    DW       0  0.0   0  0.6 [kworker/0:75+pm]
15069     2 admin    IW       0  0.0   0  0.4 [kworker/0:95-ka]
13304     1 admin    S     424m  5.4   1  0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4
10394     1 admin    S     222m  2.8   0  0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py
 7597     1 admin    S    41708  0.5   0  0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0
 6268 18618 admin    S <  2189m 28.0   0  0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf
14488     1 admin    S    1397m 17.8   1  0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/python/bin/cc3-fastcgi -w /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3 start
12222 11744 admin    S     882m 11.2   1  0.1 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.system/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.system/tmp --log-error=/share/CACHEDEV1_DATA/.system/data/QNAP-TS251D.err --pid-file
 7559     1 admin    S     559m  7.1   0  0.1 /mnt/ext/opt/Python/bin/python ./manage.pyc runfcgi method=threaded socket=/tmp/netmgr.sock pidfile=/tmp/netmgr.pid errlog=/tmp/nvs-django-e.log outlog=/tmp/nvs-django-o.log
16003     1 admin    S     382m  4.9   0  0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app qufirewall-monitor start
 4487     1 admin    S     239m  3.0   1  0.1 /sbin/lvmetad
 8545  8463 admin    S     222m  2.8   0  0.1 {gwd} python /usr/local/network/nmd/nmd.pyc
 8493  8463 admin    S     219m  2.8   0  0.1 {ncaas} python /usr/local/network/nmd/nmd.pyc
10072 22367 admin    S     176m  2.2   0  0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bilder/Bilder Unsortiert/ -filter:0x400 -root_event -dbdir:/share/CACHEDEV1_DATA/.system/qmonitor/dbdir
32102     1 admin    S     114m  1.4   0  0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_folder -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b
21706 20140 admin    S    88172  1.1   0  0.1 sshd: admin@pts/1
22664     1 admin    S    84952  1.0   0  0.1 /sbin/rfsd -i -f /etc/rfsd.conf
11426     1 admin    S    74752  0.9   1  0.1 /sbin/vdd_control -d
 3237   955 admin    S    41212  0.5   0  0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600
29203     1 admin    S    20692  0.2   1  0.1 {qdesk_soldier} /bin/sh /sbin/qdesk_soldier
10947 24645 admin    R    16180  0.2   1  0.1 top
21295 21014 admin    S    2463m 31.5   1  0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaults-file=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/my.cnf --basedir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10 --datadir=/share/CACHEDEV1_DATA/.system/data.m10 --plugin-dir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/lib/plugin --user=admin --tmpdir=/share/CACHEDEV1_DATA/.sys
17255 16150 httpdusr S    2180m 27.8   1  0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc/config/apache/apache.conf
 6809 20178 admin    S    1360m 17.4   0  0.0 /usr/local/apache/bin/apache_proxys -k start -f /etc/apache-sys-proxy-ssl.conf
14539 14537 admin    S    1212m 15.5   1  0.0 /usr/local/sbin/ncd
13710     1 admin    S    1196m 15.3   1  0.0 /usr/local/sbin/qulogdb --defaults-file=/mnt/ext/opt/QuLog/etc/qulog-mariadb.conf
26954 26952 admin    S    1051m 13.4   0  0.0 /usr/bin/qDmcd
31913 31423 admin    S     865m 11.0   1  0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qbox-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qbox/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qbox/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qbox/mysql/data/QNAP-TS251D.err --pid-file
26094 25688 admin    S     857m 10.9   1  0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qcoolie-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qcoolie/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qcoolie/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qcoolie/mysql/data/QNAP-TS251D.er
29133     1 admin    S N   830m 10.6   0  0.0 /usr/local/medialibrary/bin/myidbserver -d
22367     1 admin    S     766m  9.8   0  0.0 /usr/local/medialibrary/bin/mymediadbserver -t -d -i -1
10610     1 admin    S     704m  9.0   0  0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080
10603     1 admin    S     704m  9.0   1  0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080
22489     1 admin    S     549m  7.0   1  0.0 /sbin/upnpd br0 br0
14499     1 admin    S     507m  6.5   0  0.0 /usr/local/sbin/ncdb --defaults-file=/mnt/ext/opt/NotificationCenter/etc/nc-mariadb.conf
 9830     1 admin    S     440m  5.6   0  0.0 /mnt/ext/opt/Python/bin/python /mnt/ext/opt/netmgr/api service ip_monitor start
19033 19030 admin    S     431m  5.5   1  0.0 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/
17787     1 admin    S     401m  5.1   1  0.0 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app api start
28520 17710 Peter Pa S     383m  4.9   0  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
 7232     1 admin    S     360m  4.6   1  0.0 {php-fpm-proxy} php-fpm: master process (/etc/php-fpm-sys-proxy.conf)
 7236  7232 admin    S     360m  4.6   0  0.0 {php-fpm-proxy} php-fpm: pool www
 7237  7232 admin    S     360m  4.6   1  0.0 {php-fpm-proxy} php-fpm: pool www
16091     1 admin    S     360m  4.6   0  0.0 {php-fpm-qweb} php-fpm: master process (/etc/config/apache/php-fpm-qweb.conf)
16092 16091 httpdusr S     360m  4.6   1  0.0 {php-fpm-qweb} php-fpm: pool www
16093 16091 httpdusr S     360m  4.6   1  0.0 {php-fpm-qweb} php-fpm: pool www
 7158     1 admin    S     359m  4.6   1  0.0 {qumagie-php-fpm} php-fpm: master process (/share/CACHEDEV1_DATA/.qpkg/qumagie/v2.1.2/php-fpm-qumagie.conf)
17720 17710 admin    S     355m  4.5   1  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17710     1 admin    S     350m  4.4   0  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17718 17710 admin    S     349m  4.4   1  0.0 {cleanupd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17717 17710 admin    S     349m  4.4   1  0.0 {smbd-notifyd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
13801 13794 admin    S     341m  4.3   0  0.0 /usr/local/sbin/qulogd
26414     1 admin    S     336m  4.3   0  0.0 /usr/local/sbin/pp_qcoolied -f /etc/config/pp_qcoolie/qcoolie.conf
28267     1 admin    S     336m  4.3   0  0.0 tunnelagent
26936 26934 admin    S     325m  4.1   1  0.0 /usr/local/medialibrary/bin/myupnpmediasvr
17648 17621 admin    S <   316m  4.0   1  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
 5756     1 admin    S     312m  4.0   0  0.0 /sbin/cs_qdaemon
17621     1 admin    S <   308m  3.9   1  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
17719 17621 admin    S <   308m  3.9   0  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
32137     1 admin    S     306m  3.9   1  0.0 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b
19516     1 admin    S     302m  3.8   1  0.0 /sbin/multipathd
 8494  8463 admin    S     293m  3.7   1  0.0 {qserviced} python /usr/local/network/nmd/nmd.pyc
32046     1 admin    S     280m  3.5   1  0.0 /sbin/qsyncsrv_dbm -b
17751     1 admin    S     252m  3.2   1  0.0 /usr/local/samba/sbin/nmbd -l /var/log -D -s /etc/config/smb.conf
22937     1 admin    S     237m  3.0   1  0.0 /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/
23781     1 admin    S     227m  2.9   0  0.0 /sbin/qShield
22703     1 admin    S     226m  2.9   0  0.0 /usr/local/bin/rfsd_qmonitor -f:/tmp/rfsd_qmonitor.conf
 8547  8463 admin    S     219m  2.8   0  0.0 {ressd} python /usr/local/network/nmd/nmd.pyc
23772     1 admin    S     219m  2.8   1  0.0 qLogEngined: Write log is enabled...
19499     1 admin    S     211m  2.7   0  0.0 /usr/local/medialibrary/bin/myconvertserver -d
 6264  6082 admin    S <   207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6578  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6084  6082 admin    S <   207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6759  6082 admin    S <   207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6803  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6962  6082 admin    S <   207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 7060  6576 admin    S     207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 7220  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi

inzwischen habe ich den iob ja auch wieder laufen und teste einzelene Adapter bzgl. Performance-Verhalten. Alle Container aus: siehe Post oben

Ich kann die Übung aber nochmals machen...

[Homoran]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Alle Container aus: siehe Post oben

link bitte!

das wird hier schnell unübersichtlich

[DJMarc75]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

siehe Post oben

Du erwartest aber nicht von Helfenden dass man "siehe Post oben" alle Beiträge durchsucht ? Du machst es Dir echt einfach !

[Homoran]

ok, hab's (hoffentlich)

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Load average: 2.14 3.08 3.78 9/1123 11343

noch immer zu hoch.
wie lange war die Container station aus?

[Marc Berg]

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Mittel SSH (Putty) und top

Ich glaube mittlerweile, dass es kein CPU Problem, sondern ein Problem mit den/der Festplatte(n) ist. Das klang ja auch in einigen Kommentaren schon an.

Ist auf QNAP "iotop" installiert, welches du über das Terminal starten kannst?

[Homoran]

@marc-berg sagte in Performance Probleme durch Shelly Adapter?:

sondern ein Problem mit den/der Festplatte(n) ist

würde zum hohen I/O passen

[Marc Berg]

@homoran sagte in Performance Probleme durch Shelly Adapter?:

würde zum hohen I/O passen

genau, das ist der Gedanke dahinter. Bzw. der hohe Load.