Performance Probleme durch Shelly Adapter?
-
@schtallone said in Performance Probleme durch Shelly Adapter?:
@diamand2k22 said in Performance Probleme durch Shelly Adapter?:
Ja ich hatte den selber Fehler mit dem Mqqt Präfix, das hat mein ganzes System lahm gelegt. Mach es mal so wie ich geschrieben habe!
Gruß
Habe den Adapter (in V. 5.3.2) wieder am laufen, alle Shellys sind da und online. Alle Aliase sind auch ok. Ich berichte nach 10 Minuten...
top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15 Tasks: 10 total, 1 running, 9 sleeping, 0 stopped, 0 zombie %Cpu(s): 33,6 us, 30,6 sy, 1,7 ni, 34,0 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Mem : 7792,2 total, 3109,9 free, 3531,4 used, 1150,8 buff/cache MiB Swap: 23447,2 total, 23447,2 free, 0,0 used. 3392,0 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2644 iobroker 20 0 712300 79676 8656 S 2,3 1,0 0:30.25 io.shelly.0 142 iobroker 20 0 11,0g 229816 10096 S 1,3 2,9 1:09.76 iobroker.js-con 198 iobroker 20 0 10,7g 52016 8016 S 0,3 0,7 0:04.17 io.backitup.0 1 root 20 0 7372 732 392 S 0,0 0,0 0:00.07 bash 163 iobroker 20 0 1038376 137704 12920 S 0,0 1,7 0:13.57 io.admin.0 836 root 20 0 7504 920 400 S 0,0 0,0 0:00.03 bash 843 root 20 0 10308 948 472 R 0,0 0,0 0:01.06 top 2503 root 20 0 7504 824 380 S 0,0 0,0 0:00.04 bash 2509 root 20 0 7240 564 332 S 0,0 0,0 0:00.00 iob 2510 iobroker 20 0 921676 35672 7864 S 0,0 0,4 0:01.67 node2023-09-17 11:25:20.498 - info: host.iobroker "system.adapter.shelly.0" enabled 2023-09-17 11:25:20.806 - info: host.iobroker instance system.adapter.shelly.0 started with pid 2644 2023-09-17 11:25:24.926 - info: shelly.0 (2644) starting. Version 5.3.2 in /opt/iobroker/node_modules/iobroker.shelly, node: v18.17.1, js-controller: 5.0.12 2023-09-17 11:25:24.994 - info: shelly.0 (2644) Starting in MQTT mode. Listening on 0.0.0.0:1882 2023-09-17 11:25:26.746 - info: shelly.0 (2644) [MQTT] Device 192.168.1.62 (shellyplus2pm / shellyplus2pm-b8d61a8b94fc / shellyplus2pm#b8d61a8b94fc#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:30.584 - info: shelly.0 (2644) [MQTT] Device 192.168.1.16 (shellyplus1pm / shellyplus1pm-a8032abc230c / shellyplus1pm#a8032abc230c#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:41.763 - info: shelly.0 (2644) [MQTT] Device 192.168.1.18 (shellyplus1pm / shellyplus1pm-a8032ab96370 / shellyplus1pm#a8032ab96370#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:42.276 - info: shelly.0 (2644) [MQTT] Device 192.168.1.27 (shellyplus1 / shellyplus1-441793a820f4 / shellyplus1#441793a820f4#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:43.629 - info: shelly.0 (2644) [MQTT] Device 192.168.1.50 (shellyplus2pm / shellyplus2pm-485519a2a5d4 / shellyplus2pm#485519a2a5d4#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:45.802 - info: shelly.0 (2644) [MQTT] Device 192.168.1.56 (shellyplus2pm / shellyplus2pm-5443b23e5f74 / shellyplus2pm#5443b23e5f74#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:47.014 - info: shelly.0 (2644) [MQTT] Device 192.168.1.17 (shellyplus1pm / shellyplus1pm-a8032ab96980 / shellyplus1pm#a8032ab96980#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:47.718 - info: shelly.0 (2644) [MQTT] Device 192.168.1.52 (shellyplus2pm / shellyplus2pm-5443b23ecce4 / shellyplus2pm#5443b23ecce4#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:48.160 - info: shelly.0 (2644) [MQTT] Device 192.168.1.49 (shellyplusi4 / shellyplusi4-c049ef89b85c / shellyplusi4#c049ef89b85c#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:49.989 - info: shelly.0 (2644) [MQTT] Device 192.168.1.12 (shellyplus1pm / shellyplus1pm-7c87ce65d970 / shellyplus1pm#7c87ce65d970#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:50.030 - info: shelly.0 (2644) [MQTT] Device 192.168.1.26 (shellyplus1 / shellyplus1-441793ab9088 / shellyplus1#441793ab9088#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:50.572 - info: shelly.0 (2644) [MQTT] Device 192.168.1.15 (shellyplus1pm / shellyplus1pm-3c610579df44 / shellyplus1pm#3c610579df44#1) connected! Polltime set to 15 sec. 2023-09-17 11:25:56.423 - info: shelly.0 (2644) [MQTT] Device 192.168.1.14 (shellyplus1pm / shellyplus1pm-7c87ce65d794 / shellyplus1pm#7c87ce65d794#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:00.854 - info: shelly.0 (2644) [MQTT] Device 192.168.1.53 (shellyplus2pm / shellyplus2pm-b8d61a863524 / shellyplus2pm#b8d61a863524#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:01.275 - info: shelly.0 (2644) [MQTT] Device 192.168.1.19 (shellyplug-s / shellyplug-s-4022D8897556 / SHPLG-S#4022D8897556#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:04.593 - info: shelly.0 (2644) [MQTT] Device 192.168.1.51 (shellyplus2pm / shellyplus2pm-441793acae2c / shellyplus2pm#441793acae2c#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:05.722 - info: shelly.0 (2644) [MQTT] Device 192.168.1.59 (shellyplus2pm / shellyplus2pm-5443b23d6114 / shellyplus2pm#5443b23d6114#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:05.894 - info: shelly.0 (2644) [MQTT] Device 192.168.1.60 (shellyplus2pm / shellyplus2pm-5443b23e1a90 / shellyplus2pm#5443b23e1a90#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:07.658 - info: shelly.0 (2644) [MQTT] Device 192.168.1.63 (shellyplus2pm / shellyplus2pm-4022d8da969c / shellyplus2pm#4022d8da969c#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:07.673 - info: shelly.0 (2644) [MQTT] Device 192.168.1.55 (shellyplus2pm / shellyplus2pm-4022d8dbe474 / shellyplus2pm#4022d8dbe474#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:09.633 - info: shelly.0 (2644) [MQTT] Device 192.168.1.58 (shellyplus2pm / shellyplus2pm-b8d61a8abb7c / shellyplus2pm#b8d61a8abb7c#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:10.093 - info: shelly.0 (2644) [MQTT] Device 192.168.1.20 (shellyplug-s / shellyplug-s-4022D8897200 / SHPLG-S#4022D8897200#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:12.710 - info: shelly.0 (2644) [MQTT] Device 192.168.1.57 (shellyplus2pm / shellyplus2pm-b8d61a876248 / shellyplus2pm#b8d61a876248#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:14.130 - info: shelly.0 (2644) [MQTT] Device 192.168.1.22 (shellyplus1pm / shellyplus1pm-a8032ab94e10 / shellyplus1pm#a8032ab94e10#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:15.531 - info: shelly.0 (2644) [MQTT] Device 192.168.1.54 (shellyplus2pm / shellyplus2pm-b8d61a8bf730 / shellyplus2pm#b8d61a8bf730#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:19.453 - info: shelly.0 (2644) [MQTT] Device 192.168.1.61 (shellyplus2pm / shellyplus2pm-5443b23fd3dc / shellyplus2pm#5443b23fd3dc#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:19.515 - info: shelly.0 (2644) [MQTT] Device 192.168.1.13 (shellyplus1pm / shellyplus1pm-3c610579bd34 / shellyplus1pm#3c610579bd34#1) connected! Polltime set to 15 sec. 2023-09-17 11:26:22.667 - info: shelly.0 (2644) [MQTT] Device 192.168.1.23 (shellyplus1pm / shellyplus1pm-4855199a5d7c / shellyplus1pm#4855199a5d7c#1) connected! Polltime set to 15 sec.SEHR ruhig im log....
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
benannte Speicherbereichnigung hat den SWAP geleert.
Moin,
mal was anderes, ist die QNAP denn auf dem neusten Stand, alle Updates von QNAP eingespielt und auch sonstige Applikationen, auf dem NAS, sind aktuell?
VG
Bernd -
@schtallone Dein Load ist immer noch zu hoch. Wie vorher schon geschrieben liegt die Vermutung nahe, dass es nicht der iobroker Container ist, der das verursacht. Ich würde grundlegender anfangen und alle Container deaktivieren, Load für ein paar Minuten anzeigen lassen und sukzessive Container aktivieren und den Load betrachten. Sonst kommst Du denke ich nie an die eigentliche Ursache.
-
@dp20eic ja, alles aktuell
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15
Moin,
kannst Du mal Docker stoppen und schauen, ob der
load avarageauf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch perssheinloggen, dann kannst Du da auch TOP nutzen.VG
Bernd -
@schtallone hast Du den dubiosen JD2 Container immernoch aus ?
-
@djmarc75 ja
-
@dp20eic said in Performance Probleme durch Shelly Adapter?:
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15
Moin,
kannst Du mal Docker stoppen und schauen, ob der
load avarageauf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch perssheinloggen, dann kannst Du da auch TOP nutzen.VG
BerndMittel SSH (Putty) und top
Vor dem Stop der Container-Station:
Mem: 4056084K used, 3923148K free, 399060K shrd, 462308K buff, 898664K cached CPU: 0.0% usr 50.0% sys 0.0% nic 50.0% idle 0.0% io 0.0% irq 0.0% sirq Load average: 4.20 4.25 4.16 6/1289 29424 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 1 0 admin S 7756 0.1 0 0.0 init 2 0 admin SW 0 0.0 0 0.0 [kthreadd] 3 2 admin IW< 0 0.0 0 0.0 [rcu_gp] 4 2 admin IW< 0 0.0 0 0.0 [rcu_par_gp] 8 2 admin IWN 0 0.0 0 0.0 [mm_percpu_wq] 9 2 admin SW 0 0.0 0 0.0 [ksoftirqd/0] 10 2 admin IW 0 0.0 0 0.0 [rcu_sched] 11 2 admin SW 0 0.0 0 0.0 [migration/0] 13 2 admin SWN 0 0.0 0 0.0 [cpuhp/0] 14 2 admin SWN 0 0.0 1 0.0 [cpuhp/1] 15 2 admin SW 0 0.0 1 0.0 [migration/1] 16 2 admin SW 0 0.0 1 0.0 [ksoftirqd/1] 19 2 admin SW 0 0.0 0 0.0 [kdevtmpfs] 20 2 admin IW< 0 0.0 1 0.0 [netns] 25 2 admin SW 0 0.0 0 0.0 [kauditd] 586 2 admin SW 0 0.0 1 0.0 [khungtaskd] 587 2 admin SW 0 0.0 0 0.0 [oom_reaper] 588 2 admin IW< 0 0.0 1 0.0 [writeback] 590 2 admin SW 0 0.0 0 0.0 [kcompactd0] 591 2 admin SWN 0 0.0 0 0.0 [ksmd] 605 2 admin IW< 0 0.0 0 0.0 [cryptd] 632 2 admin IW< 0 0.0 1 0.0 [kintegrityd] 633 2 admin IW< 0 0.0 0 0.0 [kblockd] 634 2 admin IW< 0 0.0 1 0.0 [blkcg_punt_bio] 760 1 admin S 165m 2.1 0 0.0 python /usr/local/network/nmd/nmd.pyc 775 1 admin S 23040 0.2 1 0.0 {qmmsd} python /usr/local/network/nmd/nmd.pyc 853 2 admin IW< 0 0.0 0 0.0 [tifm] 860 2 admin IW< 0 0.0 1 0.0 [ata_sff] 880 2 admin IW< 0 0.0 0 0.0 [md] 899 2 admin SW 0 0.0 0 0.0 [watchdogd] 955 1 admin S 147m 1.8 1 0.0 ./Plex Media Server 998 2 admin IW< 0 0.0 0 0.0 [rpciod] 999 2 admin IW< 0 0.0 0 0.0 [kworker/u9:0-i9] 1000 2 admin IW< 0 0.0 0 0.0 [xprtiod] 1037 2 admin SW 0 0.0 1 0.0 [kswapd0] 1038 2 admin SW 0 0.0 0 0.0 [ecryptfs-kthrea] 1041 2 admin IW< 0 0.0 1 0.0 [nfsiod] 1042 2 admin IW< 0 0.0 0 0.0 [cifsiod] 1043 2 admin IW< 0 0.0 0 0.0 [smb3decryptd] 1044 2 admin IW< 0 0.0 0 0.0 [cifsfileinfoput] 1045 2 admin IW< 0 0.0 0 0.0 [cifsoplockd] 1050 2 admin IW< 0 0.0 0 0.0 [kthrotld] 1114 2 admin SW 0 0.0 1 0.0 [card0-crtc0] 1115 2 admin SW 0 0.0 0 0.0 [card0-crtc1] 1116 2 admin SW 0 0.0 0 0.0 [card0-crtc2] 1127 955 admin S N 64540 0.8 0 0.0 {Plex Script Hos} Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle 1725 2 admin IW< 0 0.0 0 0.0 [kmpath_rdacd] 1732 2 admin IW< 0 0.0 0 0.0 [nvme-wq] 1734 2 admin IW< 0 0.0 0 0.0 [nvme-reset-wq] 1736 2 admin IW< 0 0.0 0 0.0 [nvme-delete-wq] 1747 2 admin SW 0 0.0 1 0.0 [scsi_eh_0] 1748 2 admin IW< 0 0.0 0 0.0 [scsi_tmf_0] 1752 2 admin SW 0 0.0 0 0.0 [scsi_eh_1] 1753 2 admin IW< 0 0.0 0 0.0 [scsi_tmf_1] 1796 2 admin SW 0 0.0 0 0.0 [rc0] 1801 2 admin IW< 0 0.0 1 0.0 [raid5wq] 1803 2 admin IW< 0 0.0 0 0.0 [dm-block-clone] 1805 2 admin IW< 0 0.0 1 0.0 [dm_bufio_cache] 1806 2 admin IW< 0 0.0 0 0.0 [kmpathd] 1807 2 admin IW< 0 0.0 0 0.0 [kmpath_handlerd] 1813 2 admin IW< 0 0.0 1 0.0 [sdhci] 1814 2 admin SW 0 0.0 0 0.0 [irq/39-mmc0] 1871 2 admin IW< 0 0.0 1 0.0 [zswap-shrink] 1873 2 admin IW< 0 0.0 1 0.0 [mmc_complete] 1997 2 admin IW< 0 0.0 1 0.0 [uas] 2200 1 admin S 698m 8.9 0 0.0 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-station/etc/supervisord.conf -d 2274 2200 admin S 38792 0.4 0 0.0 container-station/redis-server *:0 2289 2 admin IW< 0 0.0 0 0.0 [kcopyd] 2290 2 admin IW< 0 0.0 1 0.0 [kcopyd_tracked] 2302 2 admin IW< 0 0.0 0 0.0 [drbd-reissue] 2466 1 admin S 15124 0.1 1 0.0 udevd --daemon 2843 2200 admin S 1385m 17.7 0 0.0 container-station/dockerd -H unix:///var/run/system-docker.sock --bridge=docker0 --storage-driver=overlay2 --dns 10.0.5.1 --data-root=/var/lib/system-docker --exec-root=/var/run/system-docker --pidfile=/var/run/system-docker.pid -D --userland-proxy=false --config-file /share/CACHEDEV1_DATA/.qpkg/container-station/etc/system-docker.json 2873 2843 admin S 1302m 16.6 1 0.0 container-station/containerd --config /var/run/system-docker/containerd/containerd.toml --log-level debug 2887 2200 admin S 4362m 55.8 1 0.0 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station 3052 2200 admin S 1911m 24.4 0 0.0 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --bridge=lxcbr0 --tlsverify --tlscacert=/etc/docker/tls/ca.pem --tlscert=/etc/docker/tls/server.pem --tlskey=/etc/docker/tls/server-key.pem --storage-driver=overlay2 --dns 10.0.3.1 --data-root=/var/lib/docker --exec-root=/var/run/docker --pidfile=/var/run/docker.pid -D --userland-proxy=false --config- 3100 2200 admin S 1499m 19.1 1 0.0 container-station/lxd 3101 3052 admin S 1375m 17.5 1 0.0 container-station/containerd --config /var/run/docker/containerd/containerd.toml --log-level debug 3215 2 admin SW 0 0.0 0 0.0 [md9_raid1] 3228 2 admin SW 0 0.0 0 0.0 [jbd2/md9-8] 3229 2 admin IW< 0 0.0 1 0.0 [ext4-rsv-conver] 3237 955 admin S 41212 0.5 1 0.0 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600 3239 2 admin SW 0 0.0 1 0.0 [md13_raid1]NAch Stop der Container-Station
Mem: 4409348K used, 3569884K free, 399108K shrd, 1484984K buff, 545384K cached CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0% io 0.0% irq 0.0% sirq Load average: 2.14 3.08 3.78 9/1123 11343 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 5479 2 admin RW 0 0.0 1 5.0 [notify thread] 3441 1 admin S 1326m 16.9 0 2.6 /sbin/hal_daemon -f 32076 2 admin IW 0 0.0 0 1.4 [kworker/0:0-kac] 8632 2 admin IW 0 0.0 1 1.1 [kworker/1:5-fno] 31533 2 admin IW 0 0.0 1 0.8 [kworker/1:0-eve] 15037 2 admin DW 0 0.0 0 0.6 [kworker/0:75+pm] 15069 2 admin IW 0 0.0 0 0.4 [kworker/0:95-ka] 13304 1 admin S 424m 5.4 1 0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4 10394 1 admin S 222m 2.8 0 0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py 7597 1 admin S 41708 0.5 0 0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0 6268 18618 admin S < 2189m 28.0 0 0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf 14488 1 admin S 1397m 17.8 1 0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/python/bin/cc3-fastcgi -w /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3 start 12222 11744 admin S 882m 11.2 1 0.1 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.system/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.system/tmp --log-error=/share/CACHEDEV1_DATA/.system/data/QNAP-TS251D.err --pid-file 7559 1 admin S 559m 7.1 0 0.1 /mnt/ext/opt/Python/bin/python ./manage.pyc runfcgi method=threaded socket=/tmp/netmgr.sock pidfile=/tmp/netmgr.pid errlog=/tmp/nvs-django-e.log outlog=/tmp/nvs-django-o.log 16003 1 admin S 382m 4.9 0 0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app qufirewall-monitor start 4487 1 admin S 239m 3.0 1 0.1 /sbin/lvmetad 8545 8463 admin S 222m 2.8 0 0.1 {gwd} python /usr/local/network/nmd/nmd.pyc 8493 8463 admin S 219m 2.8 0 0.1 {ncaas} python /usr/local/network/nmd/nmd.pyc 10072 22367 admin S 176m 2.2 0 0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bilder/Bilder Unsortiert/ -filter:0x400 -root_event -dbdir:/share/CACHEDEV1_DATA/.system/qmonitor/dbdir 32102 1 admin S 114m 1.4 0 0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_folder -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b 21706 20140 admin S 88172 1.1 0 0.1 sshd: admin@pts/1 22664 1 admin S 84952 1.0 0 0.1 /sbin/rfsd -i -f /etc/rfsd.conf 11426 1 admin S 74752 0.9 1 0.1 /sbin/vdd_control -d 3237 955 admin S 41212 0.5 0 0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600 29203 1 admin S 20692 0.2 1 0.1 {qdesk_soldier} /bin/sh /sbin/qdesk_soldier 10947 24645 admin R 16180 0.2 1 0.1 top 21295 21014 admin S 2463m 31.5 1 0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaults-file=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/my.cnf --basedir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10 --datadir=/share/CACHEDEV1_DATA/.system/data.m10 --plugin-dir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/lib/plugin --user=admin --tmpdir=/share/CACHEDEV1_DATA/.sys 17255 16150 httpdusr S 2180m 27.8 1 0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc/config/apache/apache.conf 6809 20178 admin S 1360m 17.4 0 0.0 /usr/local/apache/bin/apache_proxys -k start -f /etc/apache-sys-proxy-ssl.conf 14539 14537 admin S 1212m 15.5 1 0.0 /usr/local/sbin/ncd 13710 1 admin S 1196m 15.3 1 0.0 /usr/local/sbin/qulogdb --defaults-file=/mnt/ext/opt/QuLog/etc/qulog-mariadb.conf 26954 26952 admin S 1051m 13.4 0 0.0 /usr/bin/qDmcd 31913 31423 admin S 865m 11.0 1 0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qbox-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qbox/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qbox/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qbox/mysql/data/QNAP-TS251D.err --pid-file 26094 25688 admin S 857m 10.9 1 0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qcoolie-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qcoolie/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qcoolie/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qcoolie/mysql/data/QNAP-TS251D.er 29133 1 admin S N 830m 10.6 0 0.0 /usr/local/medialibrary/bin/myidbserver -d 22367 1 admin S 766m 9.8 0 0.0 /usr/local/medialibrary/bin/mymediadbserver -t -d -i -1 10610 1 admin S 704m 9.0 0 0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080 10603 1 admin S 704m 9.0 1 0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080 22489 1 admin S 549m 7.0 1 0.0 /sbin/upnpd br0 br0 14499 1 admin S 507m 6.5 0 0.0 /usr/local/sbin/ncdb --defaults-file=/mnt/ext/opt/NotificationCenter/etc/nc-mariadb.conf 9830 1 admin S 440m 5.6 0 0.0 /mnt/ext/opt/Python/bin/python /mnt/ext/opt/netmgr/api service ip_monitor start 19033 19030 admin S 431m 5.5 1 0.0 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/ 17787 1 admin S 401m 5.1 1 0.0 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app api start 28520 17710 Peter Pa S 383m 4.9 0 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 7232 1 admin S 360m 4.6 1 0.0 {php-fpm-proxy} php-fpm: master process (/etc/php-fpm-sys-proxy.conf) 7236 7232 admin S 360m 4.6 0 0.0 {php-fpm-proxy} php-fpm: pool www 7237 7232 admin S 360m 4.6 1 0.0 {php-fpm-proxy} php-fpm: pool www 16091 1 admin S 360m 4.6 0 0.0 {php-fpm-qweb} php-fpm: master process (/etc/config/apache/php-fpm-qweb.conf) 16092 16091 httpdusr S 360m 4.6 1 0.0 {php-fpm-qweb} php-fpm: pool www 16093 16091 httpdusr S 360m 4.6 1 0.0 {php-fpm-qweb} php-fpm: pool www 7158 1 admin S 359m 4.6 1 0.0 {qumagie-php-fpm} php-fpm: master process (/share/CACHEDEV1_DATA/.qpkg/qumagie/v2.1.2/php-fpm-qumagie.conf) 17720 17710 admin S 355m 4.5 1 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17710 1 admin S 350m 4.4 0 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17718 17710 admin S 349m 4.4 1 0.0 {cleanupd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17717 17710 admin S 349m 4.4 1 0.0 {smbd-notifyd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 13801 13794 admin S 341m 4.3 0 0.0 /usr/local/sbin/qulogd 26414 1 admin S 336m 4.3 0 0.0 /usr/local/sbin/pp_qcoolied -f /etc/config/pp_qcoolie/qcoolie.conf 28267 1 admin S 336m 4.3 0 0.0 tunnelagent 26936 26934 admin S 325m 4.1 1 0.0 /usr/local/medialibrary/bin/myupnpmediasvr 17648 17621 admin S < 316m 4.0 1 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 5756 1 admin S 312m 4.0 0 0.0 /sbin/cs_qdaemon 17621 1 admin S < 308m 3.9 1 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 17719 17621 admin S < 308m 3.9 0 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 32137 1 admin S 306m 3.9 1 0.0 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b 19516 1 admin S 302m 3.8 1 0.0 /sbin/multipathd 8494 8463 admin S 293m 3.7 1 0.0 {qserviced} python /usr/local/network/nmd/nmd.pyc 32046 1 admin S 280m 3.5 1 0.0 /sbin/qsyncsrv_dbm -b 17751 1 admin S 252m 3.2 1 0.0 /usr/local/samba/sbin/nmbd -l /var/log -D -s /etc/config/smb.conf 22937 1 admin S 237m 3.0 1 0.0 /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/ 23781 1 admin S 227m 2.9 0 0.0 /sbin/qShield 22703 1 admin S 226m 2.9 0 0.0 /usr/local/bin/rfsd_qmonitor -f:/tmp/rfsd_qmonitor.conf 8547 8463 admin S 219m 2.8 0 0.0 {ressd} python /usr/local/network/nmd/nmd.pyc 23772 1 admin S 219m 2.8 1 0.0 qLogEngined: Write log is enabled... 19499 1 admin S 211m 2.7 0 0.0 /usr/local/medialibrary/bin/myconvertserver -d 6264 6082 admin S < 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6578 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6084 6082 admin S < 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6759 6082 admin S < 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6803 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6962 6082 admin S < 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 7060 6576 admin S 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 7220 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
CPU: 0.0% usr 50.0% sys 0.0% nic 50.0%
Moin,
User Prozesse nutzen 50 % und NIC 50 %
Da läuft was ganz Seltsames.Bei mir sieht das so aus
%Cpu(s):
8.9 usr,
5.9 sys,
0.0 nic,
84.7 idel,
0.5 wait,@schtallone sagte in Performance Probleme durch Shelly Adapter?:
CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0%
Jetzt kommt da mal Ruhe rein, wobei mich das mit
NIC~60 % immer noch stutzig macht und das die Maschine nicht in denIdelkommt, da ist in der Grundinstallation was schräg.Wann wurde die QNAP das letzte Mal sauber heruntergefahren und neu gestartet?
VG
BerndP.S.: redis? Mal die Ausgabe nach CPU sortieren.
-
@dp20eic said in Performance Probleme durch Shelly Adapter?:
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
CPU: 0.0% usr 50.0% sys 0.0% nic 50.0%
das ist ja eine Momentaufnahme und kein average Wert, oder?
Moin,
User Prozesse nutzen 50 % und NIC 50 %
Da läuft was ganz Seltsames.Bei mir sieht das so aus
%Cpu(s):
8.9 usr,
5.9 sys,
0.0 nic,
84.7 idel,
0.5 wait,@schtallone sagte in Performance Probleme durch Shelly Adapter?:
CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0%
Jetzt kommt da mal ruhe rein, wobei mich das mit
NIC~60 % immer noch stutzig macht und das die Maschine nicht in denIdelkommt, da ist in der Grundinstallation was schräg.Wann wurde die QNAP das letzte Mal sauber heruntergefahren und neu gestartet?
gestern
VG
Bernd -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
das ist ja eine Momentaufnahme und kein average Wert, oder?
Moin,
ja, aber bei mir auch und bei mir läuft alles und nichts ist angehalten, und trotzdem komme ich nicht annähernd auf solche Werte wie bei Du auf der QNAP.
Gut, kann man jetzt auch nicht 1:1 vergleichen, da sich die CPUs vielleicht unterscheiden, bei mirDS716+II Intel Celeron N3160 4 Kerne 4 ThreadsVG
Bernd -
@dp20eic aktuell schwakt es in Putty CPU zwischen ca. 10 unud 30% (aktualisierung alle 5 sekunden oder so)
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Moin,
was ist denn das alles?
13304 1 admin S 424m 5.4 1 0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4 10394 1 admin S 222m 2.8 0 0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py 7597 1 admin S 41708 0.5 0 0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0 6268 18618 admin S < 2189m 28.0 0 0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf 14488 1 admin S 1397m 17.8 1 0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/pytPython, tutk_agent, Redis?
VG
Bernd -
@dp20eic
Da bin ich detail überfragt, es laufen ja einige systemseitige Prozesse der QNAP..
jetzt sieht es gerade so aus:
Mem: 7295456K used, 683776K free, 399416K shrd, 1253444K buff, 2503808K cached CPU: 23.4% usr 26.0% sys 2.2% nic 48.0% idle 0.0% io 0.0% irq 0.2% sirq Load average: 3.64 4.11 4.59 3/1369 12369 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 5479 2 admin SW 0 0.0 1 6.5 [notify thread] 3441 1 admin S 1326m 16.9 1 4.7 /sbin/hal_daemon -f 9038 2 admin IW 0 0.0 1 1.8 [kworker/1:2-fno] 26170 2 admin IW 0 0.0 0 1.4 [kworker/0:0-kac] 4441 2996 Peter Pa S 704m 9.0 1 0.8 io.shelly.0 29898 2 admin IW 0 0.0 0 0.8 [kworker/0:2-fno] 2996 31990 Peter Pa R 11405m145.9 1 0.6 iobroker.js-controller 9734 2 admin DW 0 0.0 0 0.6 [kworker/0:3+pm] 18549 18618 admin S < 2189m 28.0 0 0.4 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf 19283 18513 admin S 2026m 25.9 1 0.4 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station 6150 2996 Peter Pa S 689m 8.8 1 0.3 io.mqtt.0 3038 2 admin IW 0 0.0 1 0.3 [kworker/1:0-fno] 19444 18513 admin S 1941m 24.8 1 0.2 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.soc 18513 1 admin S 698m 8.9 1 0.2 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-statio 19033 19030 admin S 495m 6.3 0 0.2 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/ 13304 1 admin S 424m 5.4 1 0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4 32137 1 admin S 306m 3.9 1 0.2 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recent 10394 1 admin S 222m 2.8 0 0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py 19506 19444 admin S 1446m 18.5 1 0.1 container-station/containerd --config /var/run/docker/containerd/containerd.t 16003 1 admin S 382m 4.9 1 0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app quf 10072 22367 admin S 176m 2.2 1 0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bil 32102 1 admin S 114m 1.4 1 0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_f 22664 1 admin S 84952 1.0 0 0.1 /sbin/rfsd -i -f /etc/rfsd.conf 3237 955 admin S 41212 0.5 1 0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDE 21946 1 guest S 30660 0.3 1 0.1 avahi-daemon: running [QNAP-TS251D.local] 11909 1436 admin R 16180 0.2 1 0.1 top 10 2 admin IW 0 0.0 1 0.1 [rcu_sched] 9 2 admin SW 0 0.0 0 0.1 [ksoftirqd/0] 4453 2996 Peter Pa S 10914m139.6 0 0.0 io.backitup.0 21295 21014 admin S 2463m 31.5 0 0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaul 17255 16150 httpdusr S 2180m 27.8 1 0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
jetzt sieht es gerade so aus:
immer noch viel zu hoch
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Load average: 3.64 4.11 4.59 3/1369 12369
hast du nicht
@frederik-buss sagte in Performance Probleme durch Shelly Adapter?:
grundlegender anfangen und alle Container deaktivieren
da laufen immer noch iob Prozesse
-
@schtallone said in Performance Probleme durch Shelly Adapter?:
@dp20eic said in Performance Probleme durch Shelly Adapter?:
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15
Moin,
kannst Du mal Docker stoppen und schauen, ob der
load avarageauf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch perssheinloggen, dann kannst Du da auch TOP nutzen.VG
BerndMittel SSH (Putty) und top
Vor dem Stop der Container-Station:
Mem: 4056084K used, 3923148K free, 399060K shrd, 462308K buff, 898664K cached CPU: 0.0% usr 50.0% sys 0.0% nic 50.0% idle 0.0% io 0.0% irq 0.0% sirq Load average: 4.20 4.25 4.16 6/1289 29424 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 1 0 admin S 7756 0.1 0 0.0 init 2 0 admin SW 0 0.0 0 0.0 [kthreadd] 3 2 admin IW< 0 0.0 0 0.0 [rcu_gp] 4 2 admin IW< 0 0.0 0 0.0 [rcu_par_gp] 8 2 admin IWN 0 0.0 0 0.0 [mm_percpu_wq] 9 2 admin SW 0 0.0 0 0.0 [ksoftirqd/0] 10 2 admin IW 0 0.0 0 0.0 [rcu_sched] 11 2 admin SW 0 0.0 0 0.0 [migration/0] 13 2 admin SWN 0 0.0 0 0.0 [cpuhp/0] 14 2 admin SWN 0 0.0 1 0.0 [cpuhp/1] 15 2 admin SW 0 0.0 1 0.0 [migration/1] 16 2 admin SW 0 0.0 1 0.0 [ksoftirqd/1] 19 2 admin SW 0 0.0 0 0.0 [kdevtmpfs] 20 2 admin IW< 0 0.0 1 0.0 [netns] 25 2 admin SW 0 0.0 0 0.0 [kauditd] 586 2 admin SW 0 0.0 1 0.0 [khungtaskd] 587 2 admin SW 0 0.0 0 0.0 [oom_reaper] 588 2 admin IW< 0 0.0 1 0.0 [writeback] 590 2 admin SW 0 0.0 0 0.0 [kcompactd0] 591 2 admin SWN 0 0.0 0 0.0 [ksmd] 605 2 admin IW< 0 0.0 0 0.0 [cryptd] 632 2 admin IW< 0 0.0 1 0.0 [kintegrityd] 633 2 admin IW< 0 0.0 0 0.0 [kblockd] 634 2 admin IW< 0 0.0 1 0.0 [blkcg_punt_bio] 760 1 admin S 165m 2.1 0 0.0 python /usr/local/network/nmd/nmd.pyc 775 1 admin S 23040 0.2 1 0.0 {qmmsd} python /usr/local/network/nmd/nmd.pyc 853 2 admin IW< 0 0.0 0 0.0 [tifm] 860 2 admin IW< 0 0.0 1 0.0 [ata_sff] 880 2 admin IW< 0 0.0 0 0.0 [md] 899 2 admin SW 0 0.0 0 0.0 [watchdogd] 955 1 admin S 147m 1.8 1 0.0 ./Plex Media Server 998 2 admin IW< 0 0.0 0 0.0 [rpciod] 999 2 admin IW< 0 0.0 0 0.0 [kworker/u9:0-i9] 1000 2 admin IW< 0 0.0 0 0.0 [xprtiod] 1037 2 admin SW 0 0.0 1 0.0 [kswapd0] 1038 2 admin SW 0 0.0 0 0.0 [ecryptfs-kthrea] 1041 2 admin IW< 0 0.0 1 0.0 [nfsiod] 1042 2 admin IW< 0 0.0 0 0.0 [cifsiod] 1043 2 admin IW< 0 0.0 0 0.0 [smb3decryptd] 1044 2 admin IW< 0 0.0 0 0.0 [cifsfileinfoput] 1045 2 admin IW< 0 0.0 0 0.0 [cifsoplockd] 1050 2 admin IW< 0 0.0 0 0.0 [kthrotld] 1114 2 admin SW 0 0.0 1 0.0 [card0-crtc0] 1115 2 admin SW 0 0.0 0 0.0 [card0-crtc1] 1116 2 admin SW 0 0.0 0 0.0 [card0-crtc2] 1127 955 admin S N 64540 0.8 0 0.0 {Plex Script Hos} Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle 1725 2 admin IW< 0 0.0 0 0.0 [kmpath_rdacd] 1732 2 admin IW< 0 0.0 0 0.0 [nvme-wq] 1734 2 admin IW< 0 0.0 0 0.0 [nvme-reset-wq] 1736 2 admin IW< 0 0.0 0 0.0 [nvme-delete-wq] 1747 2 admin SW 0 0.0 1 0.0 [scsi_eh_0] 1748 2 admin IW< 0 0.0 0 0.0 [scsi_tmf_0] 1752 2 admin SW 0 0.0 0 0.0 [scsi_eh_1] 1753 2 admin IW< 0 0.0 0 0.0 [scsi_tmf_1] 1796 2 admin SW 0 0.0 0 0.0 [rc0] 1801 2 admin IW< 0 0.0 1 0.0 [raid5wq] 1803 2 admin IW< 0 0.0 0 0.0 [dm-block-clone] 1805 2 admin IW< 0 0.0 1 0.0 [dm_bufio_cache] 1806 2 admin IW< 0 0.0 0 0.0 [kmpathd] 1807 2 admin IW< 0 0.0 0 0.0 [kmpath_handlerd] 1813 2 admin IW< 0 0.0 1 0.0 [sdhci] 1814 2 admin SW 0 0.0 0 0.0 [irq/39-mmc0] 1871 2 admin IW< 0 0.0 1 0.0 [zswap-shrink] 1873 2 admin IW< 0 0.0 1 0.0 [mmc_complete] 1997 2 admin IW< 0 0.0 1 0.0 [uas] 2200 1 admin S 698m 8.9 0 0.0 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-station/etc/supervisord.conf -d 2274 2200 admin S 38792 0.4 0 0.0 container-station/redis-server *:0 2289 2 admin IW< 0 0.0 0 0.0 [kcopyd] 2290 2 admin IW< 0 0.0 1 0.0 [kcopyd_tracked] 2302 2 admin IW< 0 0.0 0 0.0 [drbd-reissue] 2466 1 admin S 15124 0.1 1 0.0 udevd --daemon 2843 2200 admin S 1385m 17.7 0 0.0 container-station/dockerd -H unix:///var/run/system-docker.sock --bridge=docker0 --storage-driver=overlay2 --dns 10.0.5.1 --data-root=/var/lib/system-docker --exec-root=/var/run/system-docker --pidfile=/var/run/system-docker.pid -D --userland-proxy=false --config-file /share/CACHEDEV1_DATA/.qpkg/container-station/etc/system-docker.json 2873 2843 admin S 1302m 16.6 1 0.0 container-station/containerd --config /var/run/system-docker/containerd/containerd.toml --log-level debug 2887 2200 admin S 4362m 55.8 1 0.0 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station 3052 2200 admin S 1911m 24.4 0 0.0 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --bridge=lxcbr0 --tlsverify --tlscacert=/etc/docker/tls/ca.pem --tlscert=/etc/docker/tls/server.pem --tlskey=/etc/docker/tls/server-key.pem --storage-driver=overlay2 --dns 10.0.3.1 --data-root=/var/lib/docker --exec-root=/var/run/docker --pidfile=/var/run/docker.pid -D --userland-proxy=false --config- 3100 2200 admin S 1499m 19.1 1 0.0 container-station/lxd 3101 3052 admin S 1375m 17.5 1 0.0 container-station/containerd --config /var/run/docker/containerd/containerd.toml --log-level debug 3215 2 admin SW 0 0.0 0 0.0 [md9_raid1] 3228 2 admin SW 0 0.0 0 0.0 [jbd2/md9-8] 3229 2 admin IW< 0 0.0 1 0.0 [ext4-rsv-conver] 3237 955 admin S 41212 0.5 1 0.0 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600 3239 2 admin SW 0 0.0 1 0.0 [md13_raid1]NAch Stop der Container-Station
Mem: 4409348K used, 3569884K free, 399108K shrd, 1484984K buff, 545384K cached CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0% io 0.0% irq 0.0% sirq Load average: 2.14 3.08 3.78 9/1123 11343 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 5479 2 admin RW 0 0.0 1 5.0 [notify thread] 3441 1 admin S 1326m 16.9 0 2.6 /sbin/hal_daemon -f 32076 2 admin IW 0 0.0 0 1.4 [kworker/0:0-kac] 8632 2 admin IW 0 0.0 1 1.1 [kworker/1:5-fno] 31533 2 admin IW 0 0.0 1 0.8 [kworker/1:0-eve] 15037 2 admin DW 0 0.0 0 0.6 [kworker/0:75+pm] 15069 2 admin IW 0 0.0 0 0.4 [kworker/0:95-ka] 13304 1 admin S 424m 5.4 1 0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4 10394 1 admin S 222m 2.8 0 0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py 7597 1 admin S 41708 0.5 0 0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0 6268 18618 admin S < 2189m 28.0 0 0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf 14488 1 admin S 1397m 17.8 1 0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/python/bin/cc3-fastcgi -w /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3 start 12222 11744 admin S 882m 11.2 1 0.1 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.system/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.system/tmp --log-error=/share/CACHEDEV1_DATA/.system/data/QNAP-TS251D.err --pid-file 7559 1 admin S 559m 7.1 0 0.1 /mnt/ext/opt/Python/bin/python ./manage.pyc runfcgi method=threaded socket=/tmp/netmgr.sock pidfile=/tmp/netmgr.pid errlog=/tmp/nvs-django-e.log outlog=/tmp/nvs-django-o.log 16003 1 admin S 382m 4.9 0 0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app qufirewall-monitor start 4487 1 admin S 239m 3.0 1 0.1 /sbin/lvmetad 8545 8463 admin S 222m 2.8 0 0.1 {gwd} python /usr/local/network/nmd/nmd.pyc 8493 8463 admin S 219m 2.8 0 0.1 {ncaas} python /usr/local/network/nmd/nmd.pyc 10072 22367 admin S 176m 2.2 0 0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bilder/Bilder Unsortiert/ -filter:0x400 -root_event -dbdir:/share/CACHEDEV1_DATA/.system/qmonitor/dbdir 32102 1 admin S 114m 1.4 0 0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_folder -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b 21706 20140 admin S 88172 1.1 0 0.1 sshd: admin@pts/1 22664 1 admin S 84952 1.0 0 0.1 /sbin/rfsd -i -f /etc/rfsd.conf 11426 1 admin S 74752 0.9 1 0.1 /sbin/vdd_control -d 3237 955 admin S 41212 0.5 0 0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600 29203 1 admin S 20692 0.2 1 0.1 {qdesk_soldier} /bin/sh /sbin/qdesk_soldier 10947 24645 admin R 16180 0.2 1 0.1 top 21295 21014 admin S 2463m 31.5 1 0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaults-file=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/my.cnf --basedir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10 --datadir=/share/CACHEDEV1_DATA/.system/data.m10 --plugin-dir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/lib/plugin --user=admin --tmpdir=/share/CACHEDEV1_DATA/.sys 17255 16150 httpdusr S 2180m 27.8 1 0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc/config/apache/apache.conf 6809 20178 admin S 1360m 17.4 0 0.0 /usr/local/apache/bin/apache_proxys -k start -f /etc/apache-sys-proxy-ssl.conf 14539 14537 admin S 1212m 15.5 1 0.0 /usr/local/sbin/ncd 13710 1 admin S 1196m 15.3 1 0.0 /usr/local/sbin/qulogdb --defaults-file=/mnt/ext/opt/QuLog/etc/qulog-mariadb.conf 26954 26952 admin S 1051m 13.4 0 0.0 /usr/bin/qDmcd 31913 31423 admin S 865m 11.0 1 0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qbox-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qbox/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qbox/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qbox/mysql/data/QNAP-TS251D.err --pid-file 26094 25688 admin S 857m 10.9 1 0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qcoolie-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qcoolie/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qcoolie/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qcoolie/mysql/data/QNAP-TS251D.er 29133 1 admin S N 830m 10.6 0 0.0 /usr/local/medialibrary/bin/myidbserver -d 22367 1 admin S 766m 9.8 0 0.0 /usr/local/medialibrary/bin/mymediadbserver -t -d -i -1 10610 1 admin S 704m 9.0 0 0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080 10603 1 admin S 704m 9.0 1 0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080 22489 1 admin S 549m 7.0 1 0.0 /sbin/upnpd br0 br0 14499 1 admin S 507m 6.5 0 0.0 /usr/local/sbin/ncdb --defaults-file=/mnt/ext/opt/NotificationCenter/etc/nc-mariadb.conf 9830 1 admin S 440m 5.6 0 0.0 /mnt/ext/opt/Python/bin/python /mnt/ext/opt/netmgr/api service ip_monitor start 19033 19030 admin S 431m 5.5 1 0.0 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/ 17787 1 admin S 401m 5.1 1 0.0 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app api start 28520 17710 Peter Pa S 383m 4.9 0 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 7232 1 admin S 360m 4.6 1 0.0 {php-fpm-proxy} php-fpm: master process (/etc/php-fpm-sys-proxy.conf) 7236 7232 admin S 360m 4.6 0 0.0 {php-fpm-proxy} php-fpm: pool www 7237 7232 admin S 360m 4.6 1 0.0 {php-fpm-proxy} php-fpm: pool www 16091 1 admin S 360m 4.6 0 0.0 {php-fpm-qweb} php-fpm: master process (/etc/config/apache/php-fpm-qweb.conf) 16092 16091 httpdusr S 360m 4.6 1 0.0 {php-fpm-qweb} php-fpm: pool www 16093 16091 httpdusr S 360m 4.6 1 0.0 {php-fpm-qweb} php-fpm: pool www 7158 1 admin S 359m 4.6 1 0.0 {qumagie-php-fpm} php-fpm: master process (/share/CACHEDEV1_DATA/.qpkg/qumagie/v2.1.2/php-fpm-qumagie.conf) 17720 17710 admin S 355m 4.5 1 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17710 1 admin S 350m 4.4 0 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17718 17710 admin S 349m 4.4 1 0.0 {cleanupd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17717 17710 admin S 349m 4.4 1 0.0 {smbd-notifyd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 13801 13794 admin S 341m 4.3 0 0.0 /usr/local/sbin/qulogd 26414 1 admin S 336m 4.3 0 0.0 /usr/local/sbin/pp_qcoolied -f /etc/config/pp_qcoolie/qcoolie.conf 28267 1 admin S 336m 4.3 0 0.0 tunnelagent 26936 26934 admin S 325m 4.1 1 0.0 /usr/local/medialibrary/bin/myupnpmediasvr 17648 17621 admin S < 316m 4.0 1 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 5756 1 admin S 312m 4.0 0 0.0 /sbin/cs_qdaemon 17621 1 admin S < 308m 3.9 1 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 17719 17621 admin S < 308m 3.9 0 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 32137 1 admin S 306m 3.9 1 0.0 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b 19516 1 admin S 302m 3.8 1 0.0 /sbin/multipathd 8494 8463 admin S 293m 3.7 1 0.0 {qserviced} python /usr/local/network/nmd/nmd.pyc 32046 1 admin S 280m 3.5 1 0.0 /sbin/qsyncsrv_dbm -b 17751 1 admin S 252m 3.2 1 0.0 /usr/local/samba/sbin/nmbd -l /var/log -D -s /etc/config/smb.conf 22937 1 admin S 237m 3.0 1 0.0 /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/ 23781 1 admin S 227m 2.9 0 0.0 /sbin/qShield 22703 1 admin S 226m 2.9 0 0.0 /usr/local/bin/rfsd_qmonitor -f:/tmp/rfsd_qmonitor.conf 8547 8463 admin S 219m 2.8 0 0.0 {ressd} python /usr/local/network/nmd/nmd.pyc 23772 1 admin S 219m 2.8 1 0.0 qLogEngined: Write log is enabled... 19499 1 admin S 211m 2.7 0 0.0 /usr/local/medialibrary/bin/myconvertserver -d 6264 6082 admin S < 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6578 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6084 6082 admin S < 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6759 6082 admin S < 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6803 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6962 6082 admin S < 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 7060 6576 admin S 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 7220 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgiinzwischen habe ich den iob ja auch wieder laufen und teste einzelene Adapter bzgl. Performance-Verhalten. Alle Container aus: siehe Post oben
Ich kann die Übung aber nochmals machen...
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Alle Container aus: siehe Post oben
link bitte!
das wird hier schnell unübersichtlich
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
siehe Post oben
Du erwartest aber nicht von Helfenden dass man "siehe Post oben" alle Beiträge durchsucht ? Du machst es Dir echt einfach !
-
ok, hab's (hoffentlich)
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Load average: 2.14 3.08 3.78 9/1123 11343
noch immer zu hoch.
wie lange war die Container station aus? -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Mittel SSH (Putty) und top
Ich glaube mittlerweile, dass es kein CPU Problem, sondern ein Problem mit den/der Festplatte(n) ist. Das klang ja auch in einigen Kommentaren schon an.
Ist auf QNAP "iotop" installiert, welches du über das Terminal starten kannst?
