Test Adapter Fronius 2.0.x

jmeister79

@negalein Was interessiert dich denn? :-)

Ich nutze WAC_minus und plus, die anderen habe ich nicht.

Ich speichere sie via Trigger mit einem Regex in eigene Datenpunkte und verwalte die. In Kombination mit dem Ertrag der PV Anlage kannst Du wunderbar sehen wie effektiv du bist.

Minus ist Einspeisung
Plus ist Bezug.

Die Differenz aus PV und Bezug/Einspeisung ist dann dein Hausverbrauch.
Die Leistung ist Vorzeichenbehaftet und kann immer verwendet werden.
Der Ertrag des Fremdwechselrichters muss dann selber eingebracht werden um dann damit deine Verbraucher zu errechnen. Das geht dann leider nur in seinem Takt.

Ich habe zusätzlich zur Fronius Anlage noch n haufen Mikrowechselrichter, die werden aber vom Fronius Smartmeter nicht explizit als PV Energie erkannt sondern werden mit dem Bezug der Verbraucher verrechnet. Beim Einspeisen aber berücksichtigt.

Der Ganze Kram bezüglich Überschussladen usw. klärt Fronius systemintern. Soll heißen, dass deine Wallbox nur weiß was an Überschuss da ist wenn sie selber Istwerte liefern kann. Sonst ist sie für dein Smartmeter nur ein weiterer Verbraucher.
Entweder musst Du dir selber da was programmieren wenn Du n Fremdgerät mit OCPP hast (ist aber simpel, mache das auch für meinen Pool) oder im Falle der Fronius Wallbox macht sie das alleine.

grazer2500

Ich habe den Adapter jetzt Installiert. Aber irgendwie erkennt er nicht die IP Adresse vom Wechselrichter. Es ist ein Fronius Symo Gen24 6.0 Plus. Aber im Browser komme ich mit der IP direkt auf das Dashboard vom WR. habe ich übersehen das ich nicht was einrichten muss auser die IP Adresse?

fronius.0
2023-11-26 14:49:11.339	error	Please configure the Fronius adapter
fronius.0
2023-11-26 14:49:11.339	error	Please configure the Fronius adapter
fronius.0
2023-11-26 14:49:11.339	error	Please configure the Fronius adapter
fronius.0
2023-11-26 14:49:11.339	error	Please configure the Fronius adapter
fronius.0
2023-11-26 14:49:11.278	info	starting. Version 2.0.2 in /opt/iobroker/node_modules/iobroker.fronius, node: v18.16.0, js-controller: 5.0.12
fronius.0
2023-11-26 14:49:11.278	info	starting. Version 2.0.2 in /opt/iobroker/node_modules/iobroker.fronius, node: v18.16.0, js-controller: 5.0.12
fronius.0
2023-11-26 14:49:11.278	info	starting. Version 2.0.2 in /opt/iobroker/node_modules/iobroker.fronius, node: v18.16.0, js-controller: 5.0.12
fronius.0
2023-11-26 14:49:11.278	info	starting. Version 2.0.2 in /opt/iobroker/node_modules/iobroker.fronius, node: v18.16.0, js-controller: 5.0.12
fronius.0
2023-11-26 14:49:06.232	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
fronius.0
2023-11-26 14:49:06.232	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
fronius.0
2023-11-26 14:49:06.232	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
fronius.0
2023-11-26 14:49:06.232	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
fronius.0
2023-11-26 14:49:06.225	info	terminating
fronius.0
2023-11-26 14:49:06.225	info	terminating
fronius.0
2023-11-26 14:49:06.225	info	terminating
fronius.0
2023-11-26 14:49:06.225	info	terminating

Wenn

legro

@grazer2500

Hast du den Zugriff auf die API im Wechselrichter aktiviert?

grazer2500

@legro Danke für den Hinweis.
Werde ich mir zuhause nochmal anschauen. Vermute aber gerade stark das ich dies vergessen habe.

grazer2500

@legro ja das hat gefehlt. Jetzt funktioniert es

hssk

Nutzer die 2. Weihnachtstage zum erweitern meines PV-Projekts. Leider habe ich dabei für folgendes keine Lösung gefunden:

Suche die Datenpunkte für den EnergyForecast z.B. für heute erwarteter Ertrag oder verbleibender erwarteter Ertrag für den restlichen Tag. In der Flow-App werden diese Daten ja angezeigt. In den Objekten werden unter Energyforecast verschiedenen Datenpunkte angezeigt. Leider beinhaltet aber keine diese Information.
Hat jemand einen Tipp, wie man an diese Forecast-Daten rankommt?
Vielen Dank und einen schönen 2. Weihnachtsfeiertag.

Eaglefire

Bei mir läuft der Adapter aktuell nicht. Kann jemand helfen. Ich dachte Pro ist keine Voraussetzung.


fronius-solarweb.0
2023-12-27 10:46:49.336	info	{"responseError":3503,"responseMessage":"Not a Pro PV system."}

fronius-solarweb.0
2023-12-27 10:46:49.335	info	Disable Pro Endpoints

mcm1957

@eaglefire
Die Meldung besagt nur, dass die PRO Funktionen ohne PRO nicht angelegt / ausgelesen werden. Das its KEIN Fehler - sihe auch Severity info.

Ansonsten:
Bitte bei allen Fehlermeldungen immer die betroffenen Versionen angeben:
adapter
admin
js-controller
node
O/S

Und ein haöbwegs klare Fehlermeldung "läuft nicht" ist nicht viel besser wie "gibt ein problem" und dazu ein vollständiges Log das otimaler Weise die / eine Fehlermelung zeigt.

klassisch

[OT] Edit: - Sorry habe Post flasch Platziert! Betrifft einen anderen Adapter. Kein Fehler in diesem Adapter, der läuft bei mir weiterhin problemlos.

Es scheint ein neues Problem zu geben:
https://forum.iobroker.net/topic/71753/fronius-solarweb-troubles/2?_=1704631208352

Habt Ihr auch solche Fehlermeldungen im log? Log bitte Downloaden weil das aktuelle log in der logansicht abgeschnitten wird

2024-01-07 13:40:25.695  - [31merror[39m: fronius-solarweb.0 (7800) https://swqapi.solarweb.com/pvsystems/Geheime-Hex-Zahl/aggdata/years/2024/months/1
2024-01-07 13:40:25.695  - [31merror[39m: fronius-solarweb.0 (7800) AxiosError: Request failed with status code 500
2024-01-07 13:40:25.696  - [31merror[39m: fronius-solarweb.0 (7800) "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\"\r\n\"http://www.w3.org/TR/html4/strict.dtd\">\r\n<html>\r\n<head>\r\n<title>Fronius International GmbH</title>\r\n<meta http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\">\r\n<style type=\"text/css\">\r\n        body {\r\n                 background-image: url('data:image/jpeg;base64,/9j/4QAY

Und dann seitenweise Hexwerte im log.

da_Woody

@klassisch fronius und fronius- solar ist ein unterschied...

klassisch

@da_woody Vielen Dank, da habe ich nicht gut genug gesucht sorry.
Werde den richtigen Thread suchen.
Nutzt Du auch den solar web Adapter und hast Du das gleiche Phänomen?

da_Woody

@klassisch isch nur fronius. der solar hat mich genervt...

piForscher

Ich hatte den Adapter einige Monate gut am Laufen, jetzt wollte ich ein Update auf 2.1.0 machen und bekomme die Meldung 'Invalid version of "admin". Installed "6.12.0", required ">=6.13.16"' - obwohl ich admin 6.13.16 installiert habe.
Auch ein Downgrade zu 2.0 ändert an der Meldung nichts.
Hat jemand eine Idee, woran das liegen kann ?
Danke für jeden Hinweis... :-)

$ iobroker add fronius auto --host kallicube --debug
Installing iobroker.fronius@2.1.0... (System call)
added 1 package in 3m296 packages are looking for funding run `npm fund` for details
host.kallicube install adapter fronius
upload [6] fronius.admin /opt/iobroker/node_modules/iobroker.fronius/admin/fronius.png fronius.png image/png
upload [5] fronius.admin /opt/iobroker/node_modules/iobroker.fronius/admin/img/cancel.png img/cancel.png image/png
upload [3] fronius.admin /opt/iobroker/node_modules/iobroker.fronius/admin/img/ok.png img/ok.png image/png
upload [0] fronius.admin /opt/iobroker/node_modules/iobroker.fronius/admin/words.js words.js application/javascript
host.kallicube Invalid version of "admin". Installed "6.12.0", required ">=6.13.16"
ERROR: Process exited with code 32

mcm1957

@piforscher
Hast du ein Multihost system? Wenn ja - admin überall auf 6.13.16 ?

Ansonsten versuch bitte mal ein 'iob upload'.
Aus irgendeinem Grund hat admin im zwieten Fall nicht mitbekommen dass admin aktualisiert wurde.

piForscher · @piforscher Hast du ein Multihost system? Wenn ja - admin überall auf 6.13.16 ?

@mcm1957 Danke für die schnelle Antwort!
Ja, es ist ein Multihost.
Wie kann ich auf dem Slave die Admin-Version feststellen bzw. updaten ?
'iob upload all' habe ich gemacht...

mcm1957

@piforscher said in Test Adapter Fronius 2.0.x:

@mcm1957 Danke für die schnelle Antwort!
Ja, es ist ein Multihost.
Wie kann ich auf dem Slave die Admin-Version feststellen bzw. updaten ?
'iob upload all' habe ich gemacht...

@Thomas-Braun
Bezüglich admin / slave kannst du sicher mehr sagen. Ich hab grad mal 'nen einsamen pi4

Thomas Braun

@mcm1957 sagte in Test Adapter Fronius 2.0.x:

Bezüglich admin / slave kannst du sicher mehr sagen. Ich hab grad mal 'nen einsamen pi4

Ich bin auch kein Sklavenhalter...

@piForscher

Bitte mal auf jedem host die Ausgabe von

cd /opt/iobroker && npm ls

anschauen.

piForscher

@thomas-braun said in Test Adapter Fronius 2.0.x:

cd /opt/iobroker && npm ls

Tja, das sieht nicht so gut aus...
Master:

cd /opt/iobroker && npm ls
[sudo] password for xx:
npm ERR! code ELSPROBLEMS
npm ERR! extraneous: @types/caseless@0.12.5 /opt/iobroker/node_modules/@types/caseless
npm ERR! extraneous: @types/request@2.48.12 /opt/iobroker/node_modules/@types/request
npm ERR! extraneous: @types/tough-cookie@4.0.5 /opt/iobroker/node_modules/@types/tough-cookie
npm ERR! extraneous: coffeescript@2.7.0 /opt/iobroker/node_modules/coffeescript
npm ERR! invalid: iobroker.awattar@1.0.6 /opt/iobroker/node_modules/iobroker.awattar
npm ERR! invalid: iobroker.slideshow@0.1.4 /opt/iobroker/node_modules/iobroker.slideshow
npm ERR! invalid: iobroker.tuya@3.15.0 /opt/iobroker/node_modules/iobroker.tuya
npm ERR! extraneous: jsonata@2.0.5 /opt/iobroker/node_modules/jsonata
npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect
npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors
npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2
npm ERR! extraneous: typescript@5.3.3 /opt/iobroker/node_modules/typescript
npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc
npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan
iobroker.inst@2.0.3 /opt/iobroker
├── @types/caseless@0.12.5 extraneous
├── @types/request@2.48.12 extraneous
├── @types/tough-cookie@4.0.5 extraneous
├── coffeescript@2.7.0 extraneous
├── colors@1.4.0
├── fs-extra@7.0.1
├── iobroker.admin@6.13.16
├── iobroker.alias-manager@1.2.6
├── iobroker.awattar@1.0.6 invalid: "github:sirjojo69/ioBroker.awattar" from the root project
├── iobroker.backitup@2.11.0
├── iobroker.cleveron@0.1.0
├── iobroker.daswetter@3.1.13
├── iobroker.discovery@4.2.0
├── iobroker.energiefluss@3.6.0
├── iobroker.flot@1.12.0
├── iobroker.followthesun@0.5.0
├── iobroker.fritzbox@0.5.0
├── iobroker.fronius@2.1.0
├── iobroker.fullybrowser@3.0.12
├── iobroker.g-homa@0.5.3
├── iobroker.heatingcontrol@2.12.5
├── iobroker.hm-rega@4.0.0
├── iobroker.hm-rpc@1.16.0
├── iobroker.ical@1.15.0
├── iobroker.icons-mfd-png@1.2.1
├── iobroker.icons-open-icon-library-png@0.1.2
├── iobroker.icons-ultimate-png@1.0.1
├── iobroker.info@2.0.0
├── iobroker.javascript@7.8.0
├── iobroker.js-controller@5.0.19
├── iobroker.linux-control@1.1.5
├── iobroker.meteoalarm@3.0.2
├── iobroker.node-red@5.1.0
├── iobroker.ping@1.6.2
├── iobroker.pvforecast@2.9.1
├── iobroker.rpi2@1.3.2
├── iobroker.sayit@3.0.5
├── iobroker.shelly@6.9.0
├── iobroker.simple-api@2.8.0
├── iobroker.slideshow@0.1.4 invalid: "github:gaudes/ioBroker.slideshow#main" from the root project
├── iobroker.smartmeter@3.3.4
├── iobroker.socketio@6.6.0
├── iobroker.sql@2.2.0
├── iobroker.statistics@2.4.0
├── iobroker.telegram@3.1.0
├── iobroker.tr-064@4.2.18
├── iobroker.trashschedule@3.2.0
├── iobroker.tuya@3.15.0 invalid: "github:Apollon77/ioBroker.tuya" from the root project
├── iobroker.upnp@1.0.21
├── iobroker.viessmannapi@2.4.0
├── iobroker.vis-2-widgets-energy@0.3.9
├── iobroker.vis-bars@0.1.4
├── iobroker.vis-canvas-gauges@1.0.1
├── iobroker.vis-fancyswitch@1.1.0
├── iobroker.vis-history@1.0.0
├── iobroker.vis-hqwidgets@1.4.0
├── iobroker.vis-jqui-mfd@1.0.12
├── iobroker.vis-justgage@2.1.0
├── iobroker.vis-material-webfont@0.0.3
├── iobroker.vis-materialdesign@0.5.9
├── iobroker.vis-metro@1.2.0
├── iobroker.vis-plumb@1.0.2
├── iobroker.vis-rgraph@0.0.2
├── iobroker.vis-timeandweather@1.2.2
├── iobroker.vis-weather@2.5.6
├── iobroker.vis@1.5.4
├── iobroker.weatherunderground@3.6.0
├── iobroker.web@6.2.3
├── iobroker.wifilight@1.1.4
├── iobroker.ws@2.6.1
├── iobroker.yr@5.3.0
├── iobroker@2.0.3
├── jsonata@2.0.5 extraneous
├── node-inspect@2.0.0 extraneous
├── picocolors@1.0.0 extraneous
├── semver@5.7.2
├── suncalc2@1.8.1 extraneous
├── typescript@5.3.3 extraneous
├── virtual-tsc@0.6.2 extraneous
├── wake_on_lan@1.0.0 extraneous
└── yargs@7.1.2


npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-06-21T16_38_27_354Z-debug-0.log

Slave:

 $ cd /opt/iobroker && npm ls
iobroker.inst@3.0.0 /opt/iobroker
├── iobroker.admin@6.13.16
├── iobroker.awattar@1.0.6 (git+ssh://git@github.com/sirjojo69/ioBroker.awattar.git#8af7d95549fd67ea06fcd36a1eb35584d3b05186)
├── iobroker.backitup@2.10.11
├── iobroker.discovery@4.2.0
├── iobroker.followthesun@0.5.0
├── iobroker.fronius@2.1.0
├── iobroker.javascript@7.1.4
├── iobroker.js-controller@5.0.19
├── iobroker.pvforecast@2.9.1
├── iobroker.sayit@3.0.5
├── iobroker.slideshow@0.1.4 (git+ssh://git@github.com/gaudes/ioBroker.slideshow.git#f581e48b8fcef963e9c0048231993128e0fc3526)
├── iobroker.trashschedule@2.2.0
├── iobroker.vis@1.4.16
└── iobroker.web@6.2.3

Thomas Braun

@piforscher sagte in Test Adapter Fronius 2.0.x:

Da ist generell der Wurm drin...

Langfassung von

iob diag

(zunächst vom primären Host)

piForscher

@thomas-braun

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: kallicube
         Icon name: computer-desktop
           Chassis: desktop
  Operating System: Ubuntu 20.04.6 LTS
            Kernel: Linux 5.4.0-186-generic
      Architecture: x86-64

model name      : Intel(R) Celeron(R) CPU  N3160  @ 1.60GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 18:54:50 up  5:35,  2 users,  load average: 0.89, 1.09, 1.12
CPU threads: 4


*** Time and Time Zones ***
               Local time: Fri 2024-06-21 18:54:50 CEST
           Universal time: Fri 2024-06-21 16:54:50 UTC
                 RTC time: Fri 2024-06-21 16:54:50
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
kalle
HOME=/home/kalle
GROUPS=kalle adm cdrom sudo audio dip plugdev lxd iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        2.7G        757M        0.0K        305M        820M
Swap:          3.8G        1.4G        2.4G
Total:         7.6G        4.1G        3.2G

Active iob-Instances:   18

         3773 M total memory
         2711 M used memory
         2013 M active memory
          708 M inactive memory
          757 M free memory
           46 M buffer memory
          258 M swap cache
         3798 M total swap
         1373 M used swap
         2425 M free swap

*** top - Table Of Processes  ***
top - 18:54:51 up  5:35,  2 users,  load average: 0.89, 1.09, 1.12
Tasks: 182 total,   1 running, 181 sleeping,   0 stopped,   0 zombie
%Cpu(s): 10.7 us,  4.0 sy,  0.0 ni, 85.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3774.0 total,    756.9 free,   2711.7 used,    305.4 buff/cache
MiB Swap:   3799.0 total,   2426.0 free,   1373.0 used.    820.4 avail Mem

*** FAILED SERVICES ***

  UNIT                        LOAD   ACTIVE SUB    DESCRIPTION
* influxdb.service            loaded failed failed InfluxDB is an open-source, distributed, time series database
* snap.docker.dockerd.service loaded failed failed Service for snap application docker.dockerd

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

2 loaded units listed.

*** FILESYSTEM ***
Filesystem                      Type      Size  Used Avail Use% Mounted on
udev                            devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs                           tmpfs     378M  1.4M  377M   1% /run
/dev/sdb2                       ext4       29G   23G  4.3G  85% /
tmpfs                           tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs                           tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs                           tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sdb1                       vfat      511M  6.1M  505M   2% /boot/efi
/dev/loop0                      squashfs  106M  106M     0 100% /snap/core/16574
/dev/loop2                      squashfs   56M   56M     0 100% /snap/core18/2812
/dev/loop3                      squashfs   64M   64M     0 100% /snap/core20/2264
/dev/loop5                      squashfs   56M   56M     0 100% /snap/core18/2823
/dev/loop4                      squashfs   75M   75M     0 100% /snap/core22/1122
/dev/loop1                      squashfs  104M  104M     0 100% /snap/core/16928
/dev/loop6                      squashfs   64M   64M     0 100% /snap/core20/2318
/dev/loop7                      squashfs   75M   75M     0 100% /snap/core22/1380
/dev/loop8                      squashfs  129M  129M     0 100% /snap/docker/2904
/dev/loop9                      squashfs   37M   37M     0 100% /snap/heroku/4092
/dev/loop10                     squashfs  131M  131M     0 100% /snap/docker/2915
/dev/loop11                     squashfs   39M   39M     0 100% /snap/postgresql10/47
/dev/loop12                     squashfs   37M   37M     0 100% /snap/heroku/4087
/dev/loop13                     squashfs   92M   92M     0 100% /snap/lxd/24061
192.168.178.42:/volume1/Diashow nfs4      2.7T  1.6T  1.2T  58% /opt/iobroker/iobroker-data/files/vis/img/bilder_nas
tmpfs                           tmpfs     378M     0  378M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jun 21 13:19:42 2024] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Jun 21 13:19:43 2024] EXT4-fs (sdb2): re-mounted. Opts: (null)

Show mounted filesystems:
TARGET                                                 SOURCE                          FSTYPE      OPTIONS
/                                                      /dev/sdb2                       ext4        rw,relatime
|-/sys                                                 sysfs                           sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                               securityfs                      securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                     tmpfs                           tmpfs       ro,nosuid,nodev,noexec,mode=755
| | |-/sys/fs/cgroup/unified                           cgroup2                         cgroup2     rw,nosuid,nodev,noexec,relatime
| | |-/sys/fs/cgroup/systemd                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,xattr,name=systemd
| | |-/sys/fs/cgroup/cpu,cpuacct                       cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,cpu,cpuacct
| | |-/sys/fs/cgroup/cpuset                            cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,cpuset
| | |-/sys/fs/cgroup/pids                              cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,pids
| | |-/sys/fs/cgroup/blkio                             cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,blkio
| | |-/sys/fs/cgroup/freezer                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,freezer
| | |-/sys/fs/cgroup/devices                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,devices
| | |-/sys/fs/cgroup/hugetlb                           cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,hugetlb
| | |-/sys/fs/cgroup/perf_event                        cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,perf_event
| | |-/sys/fs/cgroup/net_cls,net_prio                  cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,net_cls,net_prio
| | |-/sys/fs/cgroup/memory                            cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,memory
| | `-/sys/fs/cgroup/rdma                              cgroup                          cgroup      rw,nosuid,nodev,noexec,relatime,rdma
| |-/sys/fs/pstore                                     pstore                          pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/firmware/efi/efivars                          efivarfs                        efivarfs    rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                        none                            bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                                  debugfs                         debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing                                tracefs                         tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections                           fusectl                         fusectl     rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config                                 configfs                        configfs    rw,nosuid,nodev,noexec,relatime
|-/proc                                                proc                            proc        rw,nosuid,nodev,noexec,relatime
| `-/proc/sys/fs/binfmt_misc                           systemd-1                       autofs      rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=17334
|   `-/proc/sys/fs/binfmt_misc                         binfmt_misc                     binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                                 udev                            devtmpfs    rw,nosuid,noexec,relatime,size=1885544k,nr_inodes=471386,mode=755
| |-/dev/pts                                           devpts                          devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                           tmpfs                           tmpfs       rw,nosuid,nodev
| |-/dev/hugepages                                     hugetlbfs                       hugetlbfs   rw,relatime,pagesize=2M
| `-/dev/mqueue                                        mqueue                          mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                                 tmpfs                           tmpfs       rw,nosuid,nodev,noexec,relatime,size=386456k,mode=755
| |-/run/lock                                          tmpfs                           tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs                                    sunrpc                          rpc_pipefs  rw,relatime
| |-/run/snapd/ns                                      tmpfs[/snapd/ns]                tmpfs       rw,nosuid,nodev,noexec,relatime,size=386456k,mode=755
| | |-/run/snapd/ns/lxd.mnt                            nsfs[mnt:[4026532450]]          nsfs        rw
| | `-/run/snapd/ns/docker.mnt                         nsfs[mnt:[4026532449]]          nsfs        rw
| `-/run/user/1000                                     tmpfs                           tmpfs       rw,nosuid,nodev,relatime,size=386452k,mode=700,uid=1000,gid=1000
|-/boot/efi                                            /dev/sdb1                       vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
|-/snap/core/16574                                     /dev/loop0                      squashfs    ro,nodev,relatime
|-/snap/core18/2812                                    /dev/loop2                      squashfs    ro,nodev,relatime
|-/snap/core20/2264                                    /dev/loop3                      squashfs    ro,nodev,relatime
|-/snap/core18/2823                                    /dev/loop5                      squashfs    ro,nodev,relatime
|-/snap/core22/1122                                    /dev/loop4                      squashfs    ro,nodev,relatime
|-/snap/core/16928                                     /dev/loop1                      squashfs    ro,nodev,relatime
|-/snap/core20/2318                                    /dev/loop6                      squashfs    ro,nodev,relatime
|-/snap/core22/1380                                    /dev/loop7                      squashfs    ro,nodev,relatime
|-/snap/docker/2904                                    /dev/loop8                      squashfs    ro,nodev,relatime
|-/snap/heroku/4092                                    /dev/loop9                      squashfs    ro,nodev,relatime
|-/snap/docker/2915                                    /dev/loop10                     squashfs    ro,nodev,relatime
|-/snap/postgresql10/47                                /dev/loop11                     squashfs    ro,nodev,relatime
|-/snap/heroku/4087                                    /dev/loop12                     squashfs    ro,nodev,relatime
|-/snap/lxd/24061                                      /dev/loop13                     squashfs    ro,nodev,relatime
|-/var/lib/lxcfs                                       lxcfs                           fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
`-/opt/iobroker/iobroker-data/files/vis/img/bilder_nas 192.168.178.42:/volume1/Diashow nfs4        rw,relatime,vers=4.0,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=192.168.178.64,local_lock=none,addr=192.168.178.42

Files in neuralgic directories:

/var:
3.8G    /var/
1.9G    /var/lib
1.8G    /var/log/journal/715d8eb78de6413b8a3b89c9cd36af8d
1.8G    /var/log/journal
1.8G    /var/log

Archived and active journals take up 1.7G in the file system.

/opt/iobroker/backups:
144M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.4G    /opt/iobroker/iobroker-data/
701M    /opt/iobroker/iobroker-data/backup-objects
537M    /opt/iobroker/iobroker-data/files
187M    /opt/iobroker/iobroker-data/files/vis
146M    /opt/iobroker/iobroker-data/files/vis/img

The five largest files in iobroker-data are:
75M     /opt/iobroker/iobroker-data/backup-objects/2024-06-21_02-30_states.jsonl.gz
70M     /opt/iobroker/iobroker-data/states.jsonl
44M     /opt/iobroker/iobroker-data/objects.jsonl
44M     /opt/iobroker/iobroker-data/backup-objects/2024-06-19_18-30_states.jsonl.gz
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.3-1nodesource1
  Version table:
     18.20.3-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
 *** 18.20.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     10.19.0~dfsg-3ubuntu1.6 500
        500 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages
        500 http://archive.ubuntu.com/ubuntu focal-security/universe amd64 Packages
     10.19.0~dfsg-3ubuntu1 500
        500 http://archive.ubuntu.com/ubuntu focal/universe amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

nodejs modules from github:     1
|   `-- xmlbuilder@0.4.2 invalid: "https://github.com/hobbyquaker/xmlbuilder-js/tarball/29fe5030dc6852007dc8d1bfd5109d75f8da58d5" from node_modules/homematic-xmlrpc

Adapter State
+ system.adapter.admin.0                  : admin                 : kallicube                                -  enabled, port: 8081, bind: 192.168.178.64, run as: admin
  system.adapter.admin.1                  : admin                 : Pi2                                      - disabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : kallicube                                -  enabled
  system.adapter.awattar.0                : awattar               : kallicube                                -  enabled
+ system.adapter.backitup.0               : backitup              : kallicube                                -  enabled
  system.adapter.backitup.2               : backitup              : iobroker-pi                              - disabled
  system.adapter.cleveron.0               : cleveron              : kallicube                                - disabled
  system.adapter.daswetter.0              : daswetter             : kallicube                                -  enabled
  system.adapter.discovery.0              : discovery             : kallicube                                - disabled
  system.adapter.energiefluss.0           : energiefluss          : Pi3                                      - disabled
  system.adapter.flot.0                   : flot                  : kallicube                                -  enabled
  system.adapter.followthesun.1           : followthesun          : kallicube                                - disabled
  system.adapter.fritzbox.0               : fritzbox              : Pi3                                      - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : Pi3                                      - disabled
+ system.adapter.g-homa.0                 : g-homa                : kallicube                                -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : kallicube                                - disabled
+ system.adapter.hm-rega.0                : hm-rega               : kallicube                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : kallicube                                -  enabled, port: 0
  system.adapter.ical.0                   : ical                  : kallicube                                -  enabled
  system.adapter.ical.1                   : ical                  : kallicube                                -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : kallicube                                -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: kallicube                                -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : kallicube                                -  enabled
  system.adapter.info.0                   : info                  : kallicube                                - disabled
+ system.adapter.javascript.0             : javascript            : kallicube                                -  enabled
  system.adapter.javascript.1             : javascript            : iobroker-pi                              - disabled
  system.adapter.linux-control.0          : linux-control         : Pi2                                      - disabled
  system.adapter.meteoalarm.0             : meteoalarm            : kallicube                                - disabled
  system.adapter.node-red.0               : node-red              : kallicube                                - disabled, port: 1880, bind: 192.168.178.64
  system.adapter.ping.0                   : ping                  : Pi3                                      - disabled
+ system.adapter.pvforecast.0             : pvforecast            : kallicube                                -  enabled
  system.adapter.rpi2.1                   : rpi2                  : Pi3                                      - disabled
+ system.adapter.sayit.0                  : sayit                 : kallicube                                -  enabled
+ system.adapter.shelly.0                 : shelly                : kallicube                                -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.slideshow.0              : slideshow             : iobroker-pi                              - disabled
+ system.adapter.slideshow.1              : slideshow             : kallicube                                -  enabled
  system.adapter.smartmeter.0             : smartmeter            : kallicube                                - disabled
+ system.adapter.sql.0                    : sql                   : kallicube                                -  enabled, port: 3307
+ system.adapter.statistics.0             : statistics            : kallicube                                -  enabled
  system.adapter.telegram.0               : telegram              : kallicube                                - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : Pi2                                      - disabled
+ system.adapter.trashschedule.0          : trashschedule         : kallicube                                -  enabled
  system.adapter.upnp.0                   : upnp                  : Pi2                                      - disabled
+ system.adapter.viessmannapi.0           : viessmannapi          : kallicube                                -  enabled
  system.adapter.vis-2-widgets-energy.0   : vis-2-widgets-energy  : kallicube                                -  enabled
  system.adapter.vis-bars.0               : vis-bars              : kallicube                                -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : kallicube                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : kallicube                                -  enabled
  system.adapter.vis-history.0            : vis-history           : kallicube                                -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : kallicube                                -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : kallicube                                -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : kallicube                                -  enabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : kallicube                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : kallicube                                -  enabled
  system.adapter.vis-metro.0              : vis-metro             : kallicube                                -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : kallicube                                -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : kallicube                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : kallicube                                -  enabled
  system.adapter.vis-weather.0            : vis-weather           : kallicube                                -  enabled
  system.adapter.vis.0                    : vis                   : kallicube                                -  enabled
+ system.adapter.web.0                    : web                   : kallicube                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.web.1                    : web                   : iobroker-pi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wifilight.0              : wifilight             : Pi2                                      - disabled
+ system.adapter.ws.0                     : ws                    : kallicube                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.ws.1                     : ws                    : Pi2                                      - disabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : kallicube                                -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : kallicube                                -  enabled, port: 8081, bind: 192.168.178.64, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : kallicube                                -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : kallicube                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : kallicube                                -  enabled, port: 3307
+ system.adapter.web.0                    : web                   : kallicube                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : kallicube                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awattar"      : 1.0.6    , installed 1.0.6
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "cleveron"     : 0.1.0    , installed 0.1.0
Adapter    "daswetter"    : 3.1.15   , installed 3.1.13 [Updatable]
Adapter    "discovery"    : 4.5.0    , installed 4.2.0  [Updatable]
Adapter    "energiefluss" : 3.6.0    , installed 3.6.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "followthesun" : 0.5.0    , installed 0.5.0
Adapter    "fritzbox"     : 0.6.0    , installed 0.5.0  [Updatable]
Adapter    "fronius"      : 2.1.0    , installed 2.1.0
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "g-homa"       : 0.5.3    , installed 0.5.3
Adapter    "heatingcontrol": 2.12.8  , installed 2.12.5 [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.16.0 [Updatable]
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "javascript"   : 8.3.1    , installed 7.8.0  [Updatable]
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "meteoalarm"   : 3.0.2    , installed 3.0.2
Adapter    "node-red"     : 5.2.1    , installed 5.1.0  [Updatable]
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "shelly"       : 7.0.0    , installed 6.9.0  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.3.4  [Updatable]
Adapter    "socketio"     : 6.7.0    , installed 6.6.0  [Updatable]
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "telegram"     : 3.3.2    , installed 3.1.0  [Updatable]
Adapter    "tr-064"       : 4.3.0    , installed 4.2.18 [Updatable]
Adapter    "trashschedule": 3.3.0    , installed 3.2.0  [Updatable]
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "viessmannapi" : 2.3.0    , installed 2.4.0
Adapter    "vis"          : 1.5.6    , installed 1.5.4  [Updatable]
Adapter    "vis-2-widgets-energy": 0.3.11, installed 0.3.9 [Updatable]
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.4.0  [Updatable]
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.0.12 [Updatable]
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.0  [Updatable]
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.9    , installed 2.5.6  [Updatable]
Adapter    "weatherunderground": 3.7.0, installed 3.6.0 [Updatable]
Adapter    "web"          : 6.2.5    , installed 6.2.3  [Updatable]
Adapter    "wifilight"    : 1.2.2    , installed 1.1.4  [Updatable]
Adapter    "ws"           : 2.6.1    , installed 2.6.1
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        34466
States:         29732

*** OS-Repositories and Updates ***
Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:2 http://archive.ubuntu.com/ubuntu focal InRelease
Hit:3 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:5 http://archive.ubuntu.com/ubuntu focal-security InRelease
Reading package lists...
Pending Updates: 10

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          34866      908/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       237164     11197/io.shelly.0
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       236884     11011/iobroker.js-c
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       236877     11011/iobroker.js-c
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          17773      1/init
tcp        0      0 192.168.178.64:2001     0.0.0.0:*               LISTEN      1001       237807     11151/io.hm-rpc.0
tcp        0      0 192.168.178.64:8081     0.0.0.0:*               LISTEN      1001       236225     11090/io.admin.0
tcp        0      0 0.0.0.0:35347           0.0.0.0:*               LISTEN      0          35032      -
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      101        29576      797/systemd-resolve
tcp6       0      0 :::22                   :::*                    LISTEN      0          34868      908/sshd: /usr/sbin
tcp6       0      0 :::46017                :::*                    LISTEN      0          35033      -
tcp6       0      0 :::111                  :::*                    LISTEN      0          12015      1/init
tcp6       0      0 :::50000                :::*                    LISTEN      1001       238839     11257/io.g-homa.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       237152     11204/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       238857     11322/io.ws.0
udp        0      0 0.0.0.0:55916           0.0.0.0:*                           111        30073      813/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           111        30071      813/avahi-daemon: r
udp        0      0 127.0.0.53:53           0.0.0.0:*                           101        29575      797/systemd-resolve
udp        0      0 192.168.178.64:68       0.0.0.0:*                           100        28197      794/systemd-network
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          12012      1/init
udp6       0      0 fe80::4ecc:6aff:fe4:546 :::*                                100        29582      794/systemd-network
udp6       0      0 :::5353                 :::*                                111        30072      813/avahi-daemon: r
udp6       0      0 :::57129                :::*                                111        30074      813/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          17776      1/init

*** Log File - Last 25 Lines ***

2024-06-21 18:41:56.706  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:41:56.712  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:42:57.433  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:42:57.439  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:43:56.653  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:43:56.660  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:44:56.846  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:44:56.853  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:45:56.787  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:45:56.793  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:46:56.852  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:46:56.858  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:47:48.389  - debug: host.kallicube Incoming Host message addNotification
2024-06-21 18:47:50.535  - debug: host.kallicube Incoming Host message getNotifications
2024-06-21 18:47:50.569  - debug: host.kallicube Incoming Host message getNotifications
2024-06-21 18:47:56.699  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:47:56.706  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:48:56.790  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:48:56.799  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:49:56.669  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:49:56.675  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:50:56.845  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.lastSevenDays.value" has to be type "number" but received type "string"
2024-06-21 18:50:56.852  - info: viessmannapi.0 (11353) State value to set for "viessmannapi.0.2476945.0.features.heating.power.consumption.summary.dhw.properties.currentYear.value" has to be type "string" but received type "number"
2024-06-21 18:55:03.024  - info: host.kallicube instance system.adapter.yr.0 started with pid 12367
2024-06-21 18:55:44.250  - info: host.kallicube instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Community Forum

NEWS

Test Adapter Fronius 2.0.x

Support us

590

32.4k

81.5k

1.3m