Backitup und Grafana

Thomas Braun

Bitte keine Scteenshots aus der Konsole sondern den Text in CodeTags eingebettet hier rein.

iob diag

sagt nun zu deiner Installation?

Ich vermute da ist deine nodejs-Installation nicht auf Stand.

simatec

@thomas-braun sieht mir auch so aus. Da sind teilweise ganz alte Versionen

Thomas Braun

@simatec
Ja, npm>7 sollte auch eigentlich für eine andere Ausgabe bei npm ls sorgen.

kratan75

@simatec Meinst du den js-controller ?

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "countdown"    : 1.2.5    , installed 1.2.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "email"        : 1.1.4    , installed 1.1.4
Adapter    "fronius"      : 1.1.3    , installed 1.1.3
Adapter    "i2c"          : 1.2.1    , installed 1.2.1
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "kecontact"    : 1.5.2    , installed 1.5.2
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "openweathermap": 0.3.3   , installed 0.3.3
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pvforecast"   : 2.3.0    , installed 2.3.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.15 [Updatable]
Adapter    "vis-icontwo"  : 0.90.0   , installed 0.90.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

kratan75

@kratan75 Hier nochmal die ganze Ausgabe.

======== Start marking the full check here =========

Skript v.2023-04-02

*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.5
Architecture : armv7l
Docker : false
Virtualization : none
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 10 (buster)
Release: 10
Codename: buster

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
15:36:22 up 19:59, 1 user, load average: 0.54, 0.64, 0.79
CPU threads: 4

*** Time and Time Zones ***
Local time: Sat 2023-04-08 15:36:22 CEST
Universal time: Sat 2023-04-08 13:36:22 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi

*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: graphical.target

*** MEMORY ***
total used free shared buff/cache available
Mem: 3.8G 1.1G 1.5G 48M 1.2G 2.9G
Swap: 99M 0B 99M
Total: 3.9G 1.1G 1.6G

     3838 M total memory
     1141 M used memory
      401 M active memory
     1774 M inactive memory
     1478 M free memory
      130 M buffer memory
     1088 M swap cache
       99 M total swap
        0 M used swap
       99 M free swap

*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 30G 4.8G 24G 18% /
devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 49M 1.9G 3% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/loop1 squashfs 99M 99M 0 100% /snap/core/14788
/dev/loop0 squashfs 384K 384K 0 100% /snap/minicom/1
/dev/loop2 squashfs 99M 99M 0 100% /snap/core/14950
/dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot
tmpfs tmpfs 384M 0 384M 0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Apr 7 19:36:26 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4 :5F:01:A9:73:27 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=t tyS0,115200 console=tty1 root=PARTUUID=a62f624d-02 rootfstype=ext4 fsck.repair=y es rootwait
[Fri Apr 7 19:36:27 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Apr 7 19:36:27 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 179:2.
[Fri Apr 7 19:36:29 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
|-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode= 700
|-/snap/core/14788 /dev/loop1 squashfs ro,nodev,relatime
|-/snap/minicom/1 /dev/loop0 squashfs ro,nodev,relatime
|-/snap/core/14950 /dev/loop2 squashfs ro,nodev,relatime
`-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,cod epage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.2G /var/
510M /var/lib
325M /var/log
294M /var/lib/snapd
197M /var/lib/snapd/snaps

/opt/iobroker/backups:
461M /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
302M /opt/iobroker/iobroker-data/
252M /opt/iobroker/iobroker-data/files
78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
51M /opt/iobroker/iobroker-data/files/javascript.admin
35M /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
11M /opt/iobroker/iobroker-data/objects.jsonl
6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c 9.chunk.js.map
6.6M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.8083c40d.j s.map
6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-n ode_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_ iobr-99c23e.847b8ad9.chunk.js.map
5.3M /opt/iobroker/iobroker-data/states.jsonl

*** NodeJS-Installation ***

/usr/bin/nodejs v14.19.3
/usr/bin/node v14.19.3
/usr/bin/npm 6.14.17
/usr/bin/npx 6.14.17

nodejs:
Installed: 14.19.3-deb-1nodesource1
Candidate: 14.21.3-deb-1nodesource1
Version table:
14.21.3-deb-1nodesource1 500
500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
*** 14.19.3-deb-1nodesource1 100
100 /var/lib/dpkg/status
10.24.0~dfsg-1~deb10u3 500
500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

Objects type: jsonl
States type: jsonl

Core adapters versions
js-controller: 4.0.23
admin: 6.3.5
javascript: 6.1.4

npm ERR! peer dep missing: buffer@>=6.0.3, required by crc@4.1.1
Adapters from github: 5

Adapter State

system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admi n
system.adapter.backitup.0 : backitup : iobroker - enabled
system.adapter.countdown.0 : countdown : iobroker - enabled
system.adapter.discovery.0 : discovery : iobroker - enabled
system.adapter.email.0 : email : iobroker - enabled
system.adapter.fronius.0 : fronius : iobroker - enabled
system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iob roker - enabled
system.adapter.icons-icons8.0 : icons-icons8 : iobroker - enabled
system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled
system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled
system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled
system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iob roker - enabled
system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker - enabled
system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086
system.adapter.javascript.0 : javascript : iobroker - enabled
system.adapter.kecontact.0 : kecontact : iobroker - enabled
system.adapter.modbus.0 : modbus : iobroker - enabled
system.adapter.modbus.1 : modbus : iobroker - enabled
system.adapter.modbus.2 : modbus : iobroker - enabled
system.adapter.modbus.3 : modbus : iobroker - enabled
system.adapter.openweathermap.0 : openweathermap : iobroker - enabled
system.adapter.ping.0 : ping : iobroker - enabled
system.adapter.pvforecast.0 : pvforecast : iobroker - enabled
system.adapter.rpi2.0 : rpi2 : iobroker - enabled
system.adapter.smartmeter.0 : smartmeter : iobroker - enabled
system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled
system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled
system.adapter.vis.0 : vis : iobroker - enabled
system.adapter.weatherunderground.0 : weatherunderground : iobroker - enabled
system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admi n
instance is alive

Enabled adapters with bindings

system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admi n
system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086
system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admi n

ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.3.5 , installed 6.3.5
Adapter "backitup" : 2.6.16 , installed 2.6.16
Adapter "countdown" : 1.2.5 , installed 1.2.5
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "email" : 1.1.4 , installed 1.1.4
Adapter "fronius" : 1.1.3 , installed 1.1.3
Adapter "i2c" : 1.2.1 , installed 1.2.1
Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter "icons-icons8" : 0.0.1 , installed 0.0.1
Adapter "icons-material-png": 0.1.0, installed 0.1.0
Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0
Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0
Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter "influxdb" : 3.2.0 , installed 3.2.0
Adapter "javascript" : 6.1.4 , installed 6.1.4
Controller "js-controller": 4.0.24 , installed 4.0.23 [Updatable]
Adapter "kecontact" : 1.5.2 , installed 1.5.2
Adapter "modbus" : 5.0.11 , installed 5.0.11
Adapter "openweathermap": 0.3.3 , installed 0.3.3
Adapter "ping" : 1.5.3 , installed 1.5.3
Adapter "pvforecast" : 2.3.0 , installed 2.3.0
Adapter "rpi2" : 1.3.2 , installed 1.3.2
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "smartmeter" : 3.3.4 , installed 3.3.4
Adapter "socketio" : 4.2.0 , installed 4.2.0
Adapter "vis" : 1.4.16 , installed 1.4.15 [Updatable]
Adapter "vis-icontwo" : 0.90.0 , installed 0.90.0
Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "weatherunderground": 3.4.2, installed 3.4.2
Adapter "web" : 4.3.0 , installed 4.3.0
Adapter "ws" : 1.3.0 , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects: 3680
States: 3190

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 http://archive.raspbian.org/raspbian buster InRelease
Get:4 https://repos.influxdata.com/debian buster InRelease [7029 B]
Hit:5 https://deb.nodesource.com/node_14.x buster InRelease
Err:4 https://repos.influxdata.com/debian buster InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 7029 B in 2s (4352 B/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 107

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18055 659/sshd
tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 15205 652/influxd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 1140135 19291/iobroker.js-c
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 1140128 19291/iobroker.js-c
tcp6 0 0 :::8081 :::* LISTEN 1001 1141192 19309/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 1140639 19686/io.web.0
tcp6 0 0 :::8086 :::* LISTEN 999 18118 652/influxd
tcp6 0 0 :::22 :::* LISTEN 0 18057 659/sshd
tcp6 0 0 :::3000 :::* LISTEN 109 16125 643/grafana-server
udp 0 0 0.0.0.0:60833 0.0.0.0:* 108 16868 396/avahi-daemon: r
udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 1141592 19670/io.kecontact.
udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 1141593 19670/io.kecontact.
udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15891 633/dhcpcd
udp 0 0 0.0.0.0:47717 0.0.0.0:* 1001 1141594 19670/io.kecontact.
udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16866 396/avahi-daemon: r
udp6 0 0 :::49312 :::* 108 16869 396/avahi-daemon: r
udp6 0 0 :::5353 :::* 108 16867 396/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-04-08 15:34:52.440 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:34:58.571 - info: smartmeter.0 (19375) Received 13 values, 5 updated
2023-04-08 15:35:04.644 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:10.874 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:17.246 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:23.619 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:30.126 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:36.534 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:42.060 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:47.670 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:35:53.339 - info: smartmeter.0 (19375) Received 13 values, 5 updated
2023-04-08 15:35:59.067 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:04.617 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:10.358 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:16.341 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:22.283 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:28.263 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:34.442 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:40.609 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:47.138 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:36:54.256 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:37:00.904 - info: smartmeter.0 (19375) Received 13 values, 5 updated
2023-04-08 15:37:07.485 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:37:16.405 - info: smartmeter.0 (19375) Received 13 values, 6 updated
2023-04-08 15:37:23.365 - info: smartmeter.0 (19375) Received 13 values, 6 updated


============ Mark until here for C&P =============

iob diag has finished.

kratan75 · Skript v.2023-04-02

@kratan75 Hier die NodeJS Installation. Denke die wolltet Ihr sehen.

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.19.3
/usr/bin/node           v14.19.3
/usr/bin/npm            6.14.17
/usr/bin/npx            6.14.17

nodejs:
  Installed: 14.19.3-deb-1nodesource1
  Candidate: 14.21.3-deb-1nodesource1
  Version table:
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
 *** 14.19.3-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

kratan75

@kratan75 ```

======================= SUMMARY =======================
                     v.2023-04-02


Operatingsystem:        Raspbian GNU/Linux 10 (buster)
Kernel:                 5.10.103-v7l+
Installation:           Native
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     107
Pending iob updates:    2

Nodejs-Installation:    /usr/bin/nodejs         v14.19.3
                        /usr/bin/node           v14.19.3
                        /usr/bin/npm            6.14.17
                        /usr/bin/npx            6.14.17

Recommended versions are nodejs 18.x.y and npm 9.x.y

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.2G        1.5G         48M        1.2G        2.9G
Swap:           99M          0B         99M
Total:         3.9G        1.2G        1.6G

Active iob-Instances:   20
Active repo(s): stable

ioBroker Core:          js-controller           4.0.23
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                3680
States:                 3190

Size of iob-Database:

11M     /opt/iobroker/iobroker-data/objects.jsonl
6.9M    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================
ext

Thomas Braun

@kratan75
Die influxdb-Quelle muss angepackt werden.
Dann funktionieren auch Upgrades wieder und du kannst die 107 geschluderten Upgrades einspielen.
Und was haste da mit snapd gemacht? Vollkommen unüblich für Server.
Dann das Ganze auf nodejs 18 bringen.

Und zu guter Letzt den abgekündigten Buster beerdigen und Bullseye installieren.

Das wiederum würde ich in der 64bit-Version gleich neu installieren.

kratan75

@thomas-braun Kannst mir das bitte etwas näher erklären ?
Vor dem Update hat ja alles noch wunderbar funktioniert.
Wie passe ich die influxdb-Quelle an ?Die Upgrades denke ich bekomme ich mit

sudo apt-get update
sudo apt-get upgrade

noch hin, aber wo passe ich zum Henker die InfluxDB Quelle an.

Sorry, ich arbeite eigentlich fast nur mit IObroker selbst, nicht mit dem Linuxsystem dahinter.

Gruß Andi

Thomas Braun

@kratan75

Steht hier mit drin:

https://forum.iobroker.net/topic/62040/linux-debian-grafana-repo-muss-aktualisiert-werden

Der Grund für die notwendigen Anpassungen bei influxdb und grafana ist der gleiche.

kratan75

@thomas-braun
Ok Danke, ich lese mich da mal ein und probiere es aus. Ich berichte dann wieder wie es gelaufen ist.
Frohe Ostern

Gruß Andi

Thomas Braun

@kratan75 sagte in Backitup und Grafana:

Sorry, ich arbeite eigentlich fast nur mit IObroker selbst, nicht mit dem Linuxsystem dahinter.

Dann musst du das ändern. Ein wenig Systempflege ist durchaus abgebracht.

vstrasser

@thomas-braun @simatec
ich häng' mich mal hier rein. Seit dem 25.3. lässt sich kein erfolgreiches Grafana Backup mehr durchführen. Ich kann leider nicht nachvollziehen, was sich zu diesem Zeitpunkt hin verändert hat. Ich tippe aber auf Adapter Updates oder System Updates.

Hier der (denke ich) relevante Auszug aus dem BackItUp Log im iobroker:

[DEBUG] [grafana] - Start Grafana Backup ...
[DEBUG] [grafana] - Created grafana_tmp directory: "/opt/iobroker/backups/grafana_tmp"
[DEBUG] [grafana] - Created dashboard directory
[DEBUG] [grafana] - Created dashboards_manually_restore directory
[DEBUG] [grafana] - Created datasource directory
[DEBUG] [grafana] - start Grafana request ...
[ERROR] [grafana] - Grafana is not available: Error: getaddrinfo ENOTFOUND http
[ERROR] [grafana] - Grafana is not available!
[DEBUG] [grafana] - Try deleting the Grafana tmp directory: "/opt/iobroker/backups/grafana_tmp"
[DEBUG] [grafana] - Grafana tmp directory "/opt/iobroker/backups/grafana_tmp" successfully deleted
[ERROR] [grafana] - Grafana Backup cannot created ...
[DEBUG] [grafana] - done

Hier der Output von "iob diag"

======================= SUMMARY =======================
		     v.2023-04-02


Operatingsystem: 	Raspbian GNU/Linux 10 (buster)
Kernel: 		5.10.103-v7l+
Installation: 		Native
Timezone: 		Europe/London (BST, +0100)
User-ID: 		1000
X-Server: 		false
Boot Target: 		multi-user.target

Pending OS-Updates: 	0
Pending iob updates: 	0

Nodejs-Installation: 	/usr/bin/nodejs 	v16.19.1
			/usr/bin/node 		v16.19.1
			/usr/bin/npm 		8.19.3
			/usr/bin/npx 		8.19.3

Recommended versions are nodejs 18.x.y and npm 9.x.y

MEMORY: 
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.8G        577M         24M        1.5G        2.5G
Swap:           99M        2.0M         97M
Total:         3.9G        1.8G        675M

Active iob-Instances: 	24
Active repo(s): stable

ioBroker Core: 		js-controller 		4.0.24
			admin 			6.3.5

ioBroker Status: 	iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypiIOB                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypiIOB                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects: 		23901
States: 		21127

Size of iob-Database:

26M	/opt/iobroker/iobroker-data/objects.jsonl
12M	/opt/iobroker/iobroker-data/objects.json.migrated
12M	/opt/iobroker/iobroker-data/objects.json.bak.migrated
27M	/opt/iobroker/iobroker-data/states.jsonl
3.8M	/opt/iobroker/iobroker-data/states.json.migrated
3.8M	/opt/iobroker/iobroker-data/states.json.bak.migrated



=================== END OF SUMMARY ====================

iobroker, influxdb, grafana laufen alle auf dem gleichen Raspi. Systemupdates alle durchgeführt. Infos und Anweisungen aus diesem Thread angeschaut und durchgeführt. Ergebnis ist nach wie vor das gleiche.

Was kann/soll ich noch tun um das Problem zu beheben?

Danke und viele Grüße, Volker

Thomas Braun

@vstrasser sagte in Backitup und Grafana:

buster

Muss durch 'Bullseye' ersetzt werden.

Timezone: Europe/London

Mutmaßlich wohnt der ioBroker nicht in dieser Zeitzone

nodejs v16.19.1

nodejs 18 ist die derzeitige Empfehlung.

Zum Thema:

Grafana is not available: Error: getaddrinfo ENOTFOUND http

Ich würde sagen, da fehlt entweder im log was oder der Grafana-Server ist nicht richtig eingetragen.

simatec

@vstrasser Zeige doch mal den vollständigen Debuglog vom Backup und deine Config von Backitup.
Mit welchem Protokoll ist Grafana erreichbar? http oder https?

vstrasser

@simatec DANKE - dein Hinweis (http / https) hat mir die Lösung gezeigt. Ich hatte im "host-feld" ein "http" vorgestellt. Frag' mich bitte nicht, warum. Nun steht wieder "nur" die IP Adresse drin und das Backup läuft erfolgreich durch.

viele Grüße, Volker

vstrasser

@thomas-braun das mit buster --> bullseye hab' ich bereits gesehen und es steht auf dem Plan. Bin noch nicht dazu gekommen. TimeZone-settings korrigiere ich. Danke. Den Update von nodejs hab' ich ebenfalls auf dem Radar. Hab's nur noch nicht hingekriegt.

viele Grüße, Volker

simatec

@vstrasser sagte in Backitup und Grafana:

@simatec DANKE - dein Hinweis (http / https) hat mir die Lösung gezeigt. Ich hatte im "host-feld" ein "http" vorgestellt. Frag' mich bitte nicht, warum. Nun steht wieder "nur" die IP Adresse drin und das Backup läuft erfolgreich durch.

viele Grüße, Volker

Hmmm wie kommt das da von alleine hin?

Ich kann leider nicht nachvollziehen, was sich zu diesem Zeitpunkt hin verändert hat.

Nun verstehe ich deine Frage noch weniger... Das kannst nur du eingetragen haben.

vstrasser

@simatec wie gesagt - ich weiß nicht, warum ich das http da vorgestellt hatte. War aber sicherlich mein eigener Fehler. Nun funktioniert es ja wieder. Nochmal "Danke"
und viele Grüße, Volker

kratan75

@thomas-braun Hallo Thomas
Jetzt habe ich mal das System auf den neuesten Stand gebracht, allerdings habe ich noch Buster drauf. Das möchte ich vorerst auch nicht ändern. Nun bekomme ich aber folgende Fehlermeldung wenn ich npm list ausführe.

pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $ npm list
npm ERR! code ELSPROBLEMS
npm ERR! missing: @alcalzone/release-script-plugin-iobroker@^3.5.9, required by iobroker.backitup@2.6.16
npm ERR! missing: @alcalzone/release-script-plugin-license@^3.5.9, required by iobroker.backitup@2.6.16
npm ERR! missing: @alcalzone/release-script@^3.5.9, required by iobroker.backitup@2.6.16
npm ERR! missing: @googleapis/drive@^4.0.2, required by iobroker.backitup@2.6.16
npm ERR! missing: @iobroker/adapter-core@^2.6.7, required by iobroker.backitup@2.6.16
npm ERR! missing: @iobroker/testing@^4.1.0, required by iobroker.backitup@2.6.16
npm ERR! missing: chai@^4.3.7, required by iobroker.backitup@2.6.16
npm ERR! missing: dropbox-v2-api@^2.5.10, required by iobroker.backitup@2.6.16
npm ERR! missing: express@^4.18.2, required by iobroker.backitup@2.6.16
npm ERR! missing: ftp@^0.3.10, required by iobroker.backitup@2.6.16
npm ERR! missing: google-auth-library@^8.7.0, required by iobroker.backitup@2.6.16
npm ERR! missing: gulp@^4.0.2, required by iobroker.backitup@2.6.16
npm ERR! missing: mocha@^10.2.0, required by iobroker.backitup@2.6.16
npm ERR! missing: node-wol@^0.1.1, required by iobroker.backitup@2.6.16
npm ERR! missing: onedrive-api@^1.0.7, required by iobroker.backitup@2.6.16
npm ERR! missing: request@^2.88.2, required by iobroker.backitup@2.6.16
npm ERR! missing: tar-fs@^2.1.1, required by iobroker.backitup@2.6.16
npm ERR! missing: webdav@^4.11.2, required by iobroker.backitup@2.6.16
iobroker.backitup@2.6.16 /opt/iobroker/node_modules/iobroker.backitup
├── UNMET DEPENDENCY @alcalzone/release-script-plugin-iobroker@^3.5.9
├── UNMET DEPENDENCY @alcalzone/release-script-plugin-license@^3.5.9
├── UNMET DEPENDENCY @alcalzone/release-script@^3.5.9
├── UNMET DEPENDENCY @googleapis/drive@^4.0.2
├── UNMET DEPENDENCY @iobroker/adapter-core@^2.6.7
├── UNMET DEPENDENCY @iobroker/testing@^4.1.0
├── axios@1.3.5
├── UNMET DEPENDENCY chai@^4.3.7
├── UNMET DEPENDENCY dropbox-v2-api@^2.5.10
├── UNMET DEPENDENCY express@^4.18.2
├── fs-extra@11.1.1
├── UNMET DEPENDENCY ftp@^0.3.10
├── UNMET DEPENDENCY google-auth-library@^8.7.0
├── UNMET DEPENDENCY gulp@^4.0.2
├── UNMET DEPENDENCY mocha@^10.2.0
├── node-schedule@2.1.1
├── UNMET DEPENDENCY node-wol@^0.1.1
├── UNMET DEPENDENCY onedrive-api@^1.0.7
├── UNMET DEPENDENCY request@^2.88.2
├── UNMET DEPENDENCY tar-fs@^2.1.1
└── UNMET DEPENDENCY webdav@^4.11.2


npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-04-14T15_06_19_781Z-debug-0.log

apt update:

pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $ sudo apt update
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 http://archive.raspbian.org/raspbian buster InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://apt.grafana.com stable InRelease
Hit:6 https://deb.nodesource.com/node_19.x buster InRelease
Reading package lists... Done
Building dependency tree
Reading state information... Done
All packages are up to date.

pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $ npm -v
9.6.3
pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $ nodejs -v
v19.9.0
pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $

iob diag Ausgabe:

Skript v.2023-04-02

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.5
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 17:16:51 up  2:17,  1 user,  load average: 0.75, 0.43, 0.34
CPU threads: 4

*** Time and Time Zones ***
               Local time: Fri 2023-04-14 17:16:51 CEST
           Universal time: Fri 2023-04-14 15:16:51 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        801M        1.6G         16M        1.4G        3.0G
Swap:           99M          0B         99M
Total:         3.9G        801M        1.7G

         3838 M total memory
          801 M used memory
          494 M active memory
         1569 M inactive memory
         1588 M free memory
          152 M buffer memory
         1296 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       30G  5.2G   23G  19% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     1.9G   17M  1.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/loop1     squashfs   99M   99M     0 100% /snap/core/14788
/dev/loop0     squashfs   99M   99M     0 100% /snap/core/14950
/dev/loop2     squashfs  384K  384K     0 100% /snap/minicom/1
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Apr 14 14:59:30 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:BC:F7:27 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=a62f624d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Apr 14 14:59:31 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Apr 14 14:59:31 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Apr 14 14:59:33 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET             SOURCE         FSTYPE   OPTIONS
/                  /dev/mmcblk0p2 ext4     rw,noatime
|-/sys/fs/bpf      none           bpf      rw,nosuid,nodev,noexec,relatime,mode=700
|-/snap/core/14788 /dev/loop1     squashfs ro,nodev,relatime
|-/snap/core/14950 /dev/loop0     squashfs ro,nodev,relatime
|-/snap/minicom/1  /dev/loop2     squashfs ro,nodev,relatime
`-/boot            /dev/mmcblk0p1 vfat     rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G    /var/
506M    /var/lib
294M    /var/lib/snapd
253M    /var/log
197M    /var/lib/snapd/snaps

/opt/iobroker/backups:
491M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
298M    /opt/iobroker/iobroker-data/
252M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
51M     /opt/iobroker/iobroker-data/files/javascript.admin
35M     /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
6.9M    /opt/iobroker/iobroker-data/objects.jsonl
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map
6.6M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.8083c40d.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
5.1M    /opt/iobroker/iobroker-data/states.jsonl

*** NodeJS-Installation ***

/usr/bin/nodejs         v19.9.0
/usr/bin/node           v19.9.0
/usr/bin/npm            9.6.3
/usr/bin/npx            9.6.3

nodejs:
  Installed: 19.9.0-deb-1nodesource1
  Candidate: 19.9.0-deb-1nodesource1
  Version table:
 *** 19.9.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_19.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.23
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.countdown.0              : countdown             : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
  system.adapter.fronius.0                : fronius               : iobroker                                 - disabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker                                 -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : iobroker                                 -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : iobroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker                                 -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobroker                                 -  enabled
+ system.adapter.influxdb.1               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.kecontact.0              : kecontact             : iobroker                                 - disabled
  system.adapter.modbus.0                 : modbus                : iobroker                                 - disabled
  system.adapter.modbus.1                 : modbus                : iobroker                                 - disabled
  system.adapter.modbus.2                 : modbus                : iobroker                                 - disabled
  system.adapter.modbus.3                 : modbus                : iobroker                                 - disabled
  system.adapter.openweathermap.0         : openweathermap        : iobroker                                 -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : iobroker                                 -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : iobroker                                 -  enabled
  system.adapter.smartmeter.0             : smartmeter            : iobroker                                 - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.1               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "countdown"    : 1.2.5    , installed 1.2.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "email"        : 1.1.4    , installed 1.1.4
Adapter    "fronius"      : 1.1.3    , installed 1.1.3
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "kecontact"    : 1.5.2    , installed 1.5.2
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "openweathermap": 0.3.3   , installed 0.3.3
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pvforecast"   : 2.3.0    , installed 2.3.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-icontwo"  : 0.93.0   , installed 0.93.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        3685
States:         3195

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspbian.org/raspbian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 http://archive.raspberrypi.org/debian buster InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://apt.grafana.com stable InRelease
Hit:6 https://deb.nodesource.com/node_19.x buster InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          18691      633/sshd
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        16738      626/influxd
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       87197      10363/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       87190      10363/iobroker.js-c
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       87273      10384/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       85926      10666/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        16177      626/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          18693      633/sshd
tcp6       0      0 :::3000                 :::*                    LISTEN      109        16764      620/grafana
udp        0      0 0.0.0.0:51197           0.0.0.0:*                           108        16508      372/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16663      618/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        16506      372/avahi-daemon: r
udp6       0      0 :::37553                :::*                                108        16509      372/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        16507      372/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-04-14 17:15:45.097  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:15:50.051  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:15:55.104  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:00.119  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:05.074  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:10.119  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:15.097  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:20.099  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:25.091  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:30.122  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:35.068  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:40.118  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:45.093  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:50.090  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:16:55.085  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:00.099  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:05.054  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:10.084  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:15.089  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:20.088  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:27.049  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:31.218  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:35.063  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:40.090  - error: rpi2.0 (10894) GPIO is not initialized!
2023-04-14 17:17:45.078  - error: rpi2.0 (10894) GPIO is not initialized!

Nun gibt es die Meldung GPIO is not initialized.
Die GPIO brauche ich aber dringend.

Wenn ich das Backitup ausführe selbe Fehlermeldung:

BackItUp:
Your backup was not completely created. Please check the errors!!

grafana: {"message":"Request failed with status code 401","name":"AxiosError","stack":"AxiosError: Request failed with status code 401\n at settle (/opt/iobroker/node_modules/iobroker.backitup/node_modules/axios/dist/node/axios.cjs:1898:12)\n at IncomingMessage.handleStreamEnd (/opt/iobroker/node_modules/iobroker.backitup/node_modules/axios/dist/node/axios.cjs:2950:11)\n at IncomingMessage.emit (node:events:525:35)\n at endReadableNT (node:internal/streams/readable:1359:12)\n at process.processTicksAndRejections (node:internal/process/task_queues:82:21)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":0,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, /","Authorization":"Bearer ****","User-Agent":"axios/1.3.5","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","url":"http://localhost:3000/api/search","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":false,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ERR_BAD_REQUEST","status":401}

Oder ist jetzt "nodejs19" wieder zu neu ?
Was zum Henker mach ich falsch ???

Gruß Andi

Community Forum

NEWS

Backitup und Grafana

Support us

991

32.4k

81.5k

1.3m