Monatsrückblick Januar/Februar 2026 ist online!

[Thomas Braun]

@Shadowhunter23

Oh, das ist jetzt etwas zu ausführlich in der Ausgabe. Mal schauen wie ich das eingefangen bekomme...

[Thomas Braun]

@Shadowhunter23

Probier jetzt nochmal bitte.

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                Available by-id Port           Status
--------        ----------------               ----------------------------   ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                              TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                              TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                              TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.4        tcp://192.168.0.99:20108       -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.99:20108       -                              TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Und nochmal bitte einen Lauf... :-)

[Shadowhunter23]

Für dich als Info, zur Sicherheit lösche ich das Script vorher immer.

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.4        tcp://192.168.0.99:20108            -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.99:20108            -                                   TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23 sagte in iob diag - Skript:

zur Sicherheit lösche ich das Script vorher immer.

Brauchst du nicht.
curl überschreibt das Ziel immer mit dem aktuellen Inhalt.

Schau bitte jetzt nochmal.

[Shadowhunter23]

Wollte nur sicher gehen.

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.4        tcp://192.168.0.99:20108            -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.99:20108            -                                   TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

Auf meinem 'simpel'-System schaut es so aus:

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status              
--------        ----------------                    ----------------------------        ------              
zigbee.0        ...00_23_93_2C_A8-if00-port0        ...00_23_93_2C_A8-if00-port0        ✓ Matching

[Thomas Braun]

@Shadowhunter23

Und nochmal bitte...

Ziel ist solch ein Layout:

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        ...00_23_93_2C_A8-if00-port0         ...00_23_93_2C_A8-if00-port0         ✓ Matching
                                                ...00_23_93_2C_A8-if00-port2         ✗ Not matching
zigbee.1        /dev/ttyUSB0                        ...00_23_93_2C_A8-if00-port0         ✗ Not matching
                                                ...00_23_93_2C_A8-if00-port2         ✗ Not matching
zigbee.2        tcp://192.168.0.64:20108             -                                   TCP Connection

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.4        tcp://192.168.0.99:20108            -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.99:20108            -                                   TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Deine 5 tcp-Verbindungen sind aber eine harte Nuss für mich... :-)
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...

Versuch nun nochmal, bitte.

[Shadowhunter23]

@Thomas-Braun sagte in iob diag - Skript:

Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...

Die Stabilität gibt mir für meinen Teil Recht auch wenn es 5 Instanzen sind.

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Bitte nochmal.

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

So langsam gehen mir die Ideen aus...

Versuch nochmal.

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Das schaut doch schon fast aus wie gewünscht...
Bitte jetzt nochmal laufen lassen.

Ich brauch übrigens nur den Part ab
=== ZigBee Port Overview ===

Der Code davor wird nicht geändert.

[Shadowhunter23]

Komplett ohne Log:

Script v.2026-03-08

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: iobroker
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
          Kernel: Linux 6.17.13-1-pve
    Architecture: x86-64
OS is similar to:
model name      : Intel(R) Core(TM) i5-10500T CPU @ 2.30GHz
CPU threads     : 6
Docker          : false                                                                                                                                                          Virtualization  : lxc                                                                                                                                                            Kernel          : x86_64                                                                                                                                                         Userland        : 64bit                                                                                                                                                          Systemuptime and Load:                                                                                                                                                            22:55:31 up  3:01,  2 users,  load average: 0.41, 0.39, 0.31                                                                                                                    *** LIFE CYCLE STATUS ***                                                                                                                                                        Operating System is the current Debian stable version codenamed 'trixie'!                                                                                                        *** TIME AND TIMEZONES ***                                                                                                                                                                      Local time: Sun 2026-03-08 22:55:31 CET                                                                                                                                      Universal time: Sun 2026-03-08 21:55:31 UTC                                                                                                                                            RTC time: n/a                                                                                                                                                                   Time zone: Europe/Berlin (CET, +0100)                                                                                                                            System clock synchronized: yes                                                                                                                                                                 NTP service: inactive                                                                                                                                                        RTC in local TZ: no                                                                                                                                                    *** Users and Groups ***                                                                                                                                                         User that called 'iob diag':                                                                                                                                                     tobias
HOME=/home/tobias
GROUPS=tobias adm dialout sudo audio video plugdev users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/tobias
GROUPS=iobroker tty dialout audio video plugdev redis
*** DISPLAY-SERVER SETUP ***
Display-Server:         Unknown
Display-Manager:        Not found
Desktop:
Session:                tty
*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             10G        4.6G        6.1G        2.4M         63M        6.2G
Swap:           5.4G          0B        5.4G
Total:           16G        4.6G         11G                                                                                                                                     
Active iob-Instances:   46

        10240 M total memory
         4355 M used memory
         4240 M active memory
            0 M inactive memory
         5825 M free memory
            0 M buffer memory
           60 M swap cache
         5120 M total swap
            0 M used swap
         5120 M free swap

*** top - Table Of Processes  ***
top - 22:55:31 up  3:01,  2 users,  load average: 0.41, 0.39, 0.31
Tasks:  78 total,   1 running,  77 sleeping,   0 stopped,   0 zombie
%Cpu(s):  1.6 us,  1.6 sy,  0.0 ni, 96.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :  10240.0 total,   5824.9 free,   4356.4 used,     60.8 buff/cache
MiB Swap:   5120.0 total,   5120.0 free,      0.0 used.   5883.6 avail Mem

*** FAILED SERVICES ***
  UNIT                                 LOAD   ACTIVE SUB    DESCRIPTION
* systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

1 loaded units listed.

*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem             Type      Size  Used Avail Use% Mounted on
DATA/subvol-400-disk-0 zfs        20G  4.3G   16G  22% /
none                   tmpfs     492K  4.0K  488K   1% /dev
udev                   devtmpfs   16G     0   16G   0% /dev/tty
tmpfs                  tmpfs      16G     0   16G   0% /dev/shm
tmpfs                  tmpfs     6.3G  152K  6.3G   1% /run
tmpfs                  tmpfs      16G  1.9M   16G   1% /tmp
tmpfs                  tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                  tmpfs     3.2G   12K  3.2G   1% /run/user/1000

Messages concerning filesystems in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE                 FSTYPE OPTIONS
/      DATA/subvol-400-disk-0 zfs    rw,relatime,xattr,posixacl,casesensitive

Files in neuralgic directories:
/var:
559M    /var/
221M    /var/cache
219M    /var/cache/apt
209M    /var/lib
166M    /var/cache/apt/archives
Archived and active journals take up 125.1M in the file system.

/opt/iobroker/backups:
136M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
31M     /opt/iobroker/iobroker-data/
27M     /opt/iobroker/iobroker-data/files
20M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
20M     /opt/iobroker/iobroker-data/files/admin.admin/custom
20M     /opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
3.3M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js
2.8M    /opt/iobroker/iobroker-data/objects.jsonl
1.2M    /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-00V6sJFg.js
1.2M    /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js
1.2M    /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.1
/usr/bin/node           v22.22.1
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4

✓ Node.js installation is correct

nodejs:
  Installed: 22.22.1-1nodesource1
  Candidate: 22.22.1-1nodesource1
  Version table:
 *** 22.22.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██




*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: redis
States  type: redis

Hosts:
iobroker            iobroker (version: 7.1.0, hostname: iobroker      , alive, uptime: 10891)

Core adapters versions
js-controller:  7.1.0
admin:          7.8.3
javascript:     9.0.18

nodejs modules from github:     0


Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
  system.adapter.ankersolix2.0            : ankersolix2           : iobroker                                 - disabled
+ system.adapter.awtrix-light.0           : awtrix-light          : iobroker                                 -  enabled
+ system.adapter.awtrix-light.1           : awtrix-light          : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.birthdays.0              : birthdays             : iobroker                                 -  enabled
+ system.adapter.chromecast.0             : chromecast            : iobroker                                 -  enabled
+ system.adapter.cloud.0                  : cloud                 : iobroker                                 -  enabled
+ system.adapter.device-watcher.0         : device-watcher        : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker                                 -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : iobroker                                 -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
  system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
  system.adapter.ical.1                   : ical                  : iobroker                                 -  enabled
+ system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.lg-thinq.0               : lg-thinq              : iobroker                                 - disabled
+ system.adapter.mqtt-client.0            : mqtt-client           : iobroker                                 -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mytime.0                 : mytime                : iobroker                                 -  enabled
+ system.adapter.netatmo.0                : netatmo               : iobroker                                 -  enabled
+ system.adapter.notification-manager.0   : notification-manager  : iobroker                                 -  enabled
+ system.adapter.nuki.0                   : nuki                  : iobroker                                 -  enabled
+ system.adapter.operating-hours.0        : operating-hours       : iobroker                                 -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.ping.1                   : ping                  : iobroker                                 -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker                                 -  enabled
+ system.adapter.pushover.1               : pushover              : iobroker                                 -  enabled
+ system.adapter.sayit.0                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.1                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.2                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.3                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : iobroker                                 -  enabled
+ system.adapter.text2command.1           : text2command          : iobroker                                 -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : iobroker                                 -  enabled
+ system.adapter.tuya.0                   : tuya                  : iobroker                                 -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 - disabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker                                 - disabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.64:20108
+ system.adapter.zigbee.1                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.69:20108
+ system.adapter.zigbee.2                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.79:20108
+ system.adapter.zigbee.3                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.63:20108
+ system.adapter.zigbee.4                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.99:20108

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt-client.0            : mqtt-client           : iobroker                                 -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.64:20108
+ system.adapter.zigbee.1                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.69:20108
+ system.adapter.zigbee.2                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.79:20108
+ system.adapter.zigbee.3                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.63:20108
+ system.adapter.zigbee.4                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.99:20108


ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): beta
Upgrade policy: none


Installed ioBroker-Adapters
Used repository: beta
Adapter    "admin"        : 7.8.3    , installed 7.8.3
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "ankersolix2"  : 2.4.1    , installed 2.4.1
Adapter    "awtrix-light" : 3.0.0    , installed 3.0.0
Adapter    "backitup"     : 3.3.14   , installed 3.3.14
Adapter    "birthdays"    : 5.0.0    , installed 5.0.0
Adapter    "chromecast"   : 4.1.1    , installed 4.1.1
Adapter    "cloud"        : 6.0.1    , installed 6.0.1
Adapter    "device-watcher": 2.15.5  , installed 2.15.5
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "fb-checkpresence": 1.4.2 , installed 1.4.2
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "fullybrowser" : 3.1.2    , installed 3.1.2
Adapter    "ical"         : 1.19.7   , installed 1.19.7
Adapter    "iot"          : 5.0.12   , installed 5.0.12
Adapter    "javascript"   : 9.0.18   , installed 9.0.18
Controller "js-controller": 7.1.0    , installed 7.1.0
Adapter    "lg-thinq"     : 1.1.6    , installed 1.1.6
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "mqtt-client"  : 3.0.0    , installed 3.0.0
Adapter    "mytime"       : 2.3.2    , installed 2.3.2
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "notification-manager": 1.3.0, installed 1.3.0
Adapter    "nuki"         : 2.0.0    , installed 2.0.0
Adapter    "operating-hours": 1.4.1  , installed 1.4.1
Adapter    "ping"         : 2.1.0    , installed 2.1.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "sayit"        : 5.1.0    , installed 5.1.0
Adapter    "shelly"       : 10.6.1   , installed 10.6.1
Adapter    "simple-api"   : 3.0.7    , installed 3.0.7
Adapter    "socketio"     : 7.0.8    , installed 7.0.8
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "text2command" : 4.0.0    , installed 4.0.0
Adapter    "trashschedule": 5.2.1    , installed 5.2.1
Adapter    "tuya"         : 3.17.0   , installed 3.17.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-icontwo"  : 2.11.1   , installed 2.11.1
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.13   , installed 2.5.13
Adapter    "web"          : 8.0.0    , installed 8.0.0
Adapter    "ws"           : 4.0.0    , installed 4.0.0
Adapter    "zigbee"       : 3.3.5    , installed 3.3.5


Objects and States
Please stand by - This may take a while

Objects:        12439
States:         11004

*** OS-Repositories and Updates ***

Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists... Done

Pending systemupdates: 0

*** Listening Ports ***
Netid    State     Recv-Q    Send-Q       Local Address:Port         Peer Address:Port    Process                                                                                udp      UNCONN    0         0                  0.0.0.0:6666              0.0.0.0:*        users:(("io.tuya.0",pid=943,fd=40))                                                   udp      UNCONN    0         0                  0.0.0.0:6667              0.0.0.0:*        users:(("io.tuya.0",pid=943,fd=41))                                                   udp      UNCONN    0         0                  0.0.0.0:sunrpc            0.0.0.0:*        users:(("rpcbind",pid=141,fd=5),("systemd",pid=1,fd=35))                              udp      UNCONN    0         0                  0.0.0.0:mdns              0.0.0.0:*        users:(("io.chromecast.0",pid=615,fd=35))                                             udp      UNCONN    0         0                  0.0.0.0:coap              0.0.0.0:*        users:(("io.shelly.0",pid=899,fd=52))                                                 udp      UNCONN    0         0                     [::]:sunrpc               [::]:*        users:(("rpcbind",pid=141,fd=7),("systemd",pid=1,fd=37))                              tcp      LISTEN    0         511          192.168.0.222:9092              0.0.0.0:*        users:(("io.nuki.0",pid=808,fd=31))                                                   tcp      LISTEN    0         4096               0.0.0.0:sunrpc            0.0.0.0:*        users:(("rpcbind",pid=141,fd=4),("systemd",pid=1,fd=34))                              tcp      LISTEN    0         511                0.0.0.0:1882              0.0.0.0:*        users:(("io.shelly.1",pid=921,fd=45))                                                 tcp      LISTEN    0         511                0.0.0.0:1883              0.0.0.0:*        users:(("io.mqtt.0",pid=756,fd=35))                                                   tcp      LISTEN    0         100              127.0.0.1:smtp              0.0.0.0:*        users:(("master",pid=371,fd=13))                                                      tcp      LISTEN    0         511              127.0.0.1:redis             0.0.0.0:*        users:(("redis-server",pid=164,fd=8))                                                 tcp      LISTEN    0         100                  [::1]:smtp                 [::]:*        users:(("master",pid=371,fd=14))                                                      tcp      LISTEN    0         511                  [::1]:redis                [::]:*        users:(("redis-server",pid=164,fd=9))                                                 tcp      LISTEN    0         4096                  [::]:sunrpc               [::]:*        users:(("rpcbind",pid=141,fd=6),("systemd",pid=1,fd=36))                              tcp      LISTEN    0         511                      *:http                    *:*        users:(("apache2",pid=207,fd=4),("apache2",pid=206,fd=4),("apache2",pid=204,fd=4))    tcp      LISTEN    0         4096                     *:ssh                     *:*        users:(("sshd",pid=191,fd=3),("systemd",pid=1,fd=65))                                 tcp      LISTEN    0         511                      *:3000                    *:*        users:(("io.fullybrowser",pid=689,fd=30))                                             tcp      LISTEN    0         511                      *:8087                    *:*        users:(("io.simple-api.0",pid=1316,fd=35))                                            tcp      LISTEN    0         511                      *:8082                    *:*        users:(("io.web.0",pid=1441,fd=35))                                                   tcp      LISTEN    0         511                      *:tproxy                  *:*        users:(("io.admin.0",pid=401,fd=39))                                                  
       

Das einfügen ab Listening Ports ist gerade schwierig. Müsste ich morgen Mal vom PC machen.

[Thomas Braun]

@Shadowhunter23

Nur die Tabelle mit den Zigbee-Ports (oder wie es gerade bei dir aussieht) reicht.

Versuch nochmal.

[Shadowhunter23]

Leider als Bild