MAX! Cube Blockly Abwesenheit

[mickym]

@mickym Nein noch ein Fehler:

Die setze AUTO (0) Change Node muss natürlich auch mit dem Ausgang des Auto Modes verkabelt werden.

Wenn Du mit der Maus - über die Ausgänge fährst siehst Du die Definition:

[Marko1974]

@mickym ja...ich habe nur einmal nen fehler gemacht und hab dann blind kopiert

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@mickym Nein noch ein Fehler:

wo?

[mickym]

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym said in MAX! Cube Blockly Abwesenheit:

@mickym Nein noch ein Fehler:

wo?

Die Verzögerung

ahh - hab mich verguckt - scheint doch richtig verkabelt zu sein. Sorry. Also alles gut. Schau einfach nochmal ob alles funktioniert mit den 3 Alexa Kommandos und dann kannst ja ruhig in die Heia.

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym said in MAX! Cube Blockly Abwesenheit:

@mickym Nein noch ein Fehler:

wo?

Die Verzögerung

ahh - hab mich verguckt - scheint doch richtig verkabelt zu sein. Sorry. Also alles gut. Schau einfach nochmal ob alles funktioniert mit den 3 Alexa Kommandos und dann kannst ja ruhig in die Heia.

Ja ...habe alles nochmal durchgeguckt. Die sind alle richtig! :-)))
Siehste....Du musst auch mal ins Bett

[mickym]

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym ja...ich habe nur einmal nen fehler gemacht und hab dann blind kopiert

Wundert mich aber - weil das war doch in meinem Flow - den ich für Dich exportiert habe bereits richtig verkabelt?

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 Die Anwesenheitserkennung kannst ja im Blockly belassen - die Steuerung ändern wir nach NodeRED.

Wenn ich das Blockly richtig verstehe hast Du ja ein Datenpunkt der über ein Blockly gesetzt wird und der heißt absenceAll und ist true, wenn alle gegangen sind und false wenn einer da ist.

Nee false ist, wenn alle beide da sind.
Und der ist falsch. Es gbt aber in diesem Fritzbox adapter auch einen, der die Anzahl der Personen zählt.

So der Flow ist schon fertig - das ist alles pipi.

Und jetzt solltest Du den Vorteil der Subflows (Templates) sehen:

Spoiler

[
   {
       "id": "4c7438ae.bcfe38",
       "type": "subflow",
       "name": "MAX Auto Schlafzimmer",
       "info": "# MAX Wochenprofil erstellen",
       "category": "MAX Auto Profil",
       "in": [
           {
               "x": 40,
               "y": 260,
               "wires": [
                   {
                       "id": "51b555c8.ab71cc"
                   }
               ]
           }
       ],
       "out": [
           {
               "x": 1240,
               "y": 260,
               "wires": [
                   {
                       "id": "11d5c223.e9692e",
                       "port": 0
                   },
                   {
                       "id": "5b3e5dc0.e43c84",
                       "port": 0
                   },
                   {
                       "id": "9c7d7d2e.50637",
                       "port": 0
                   },
                   {
                       "id": "4a57bb1a.df9924",
                       "port": 0
                   },
                   {
                       "id": "fb565e5a.fe907",
                       "port": 0
                   },
                   {
                       "id": "13a2b125.6ee33f",
                       "port": 0
                   },
                   {
                       "id": "fdd1014.e542e",
                       "port": 0
                   },
                   {
                       "id": "957e2c3a.ab6f6",
                       "port": 0
                   },
                   {
                       "id": "130aec2a.282f04",
                       "port": 0
                   }
               ]
           }
       ],
       "env": [],
       "meta": {},
       "color": "#FFAAAA",
       "outputLabels": [
           "AUTO Temperatur"
       ],
       "icon": "font-awesome/fa-thermometer-2"
   },
   {
       "id": "ea94e8f5.b33ed8",
       "type": "switch",
       "z": "4c7438ae.bcfe38",
       "name": "Automatik <Template>- Zeitprofil Mo - Fr",
       "property": "payload.time",
       "propertyType": "msg",
       "rules": [
           {
               "t": "btwn",
               "v": "00:00",
               "vt": "str",
               "v2": "08:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "08:00",
               "vt": "str",
               "v2": "09:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "09:00",
               "vt": "str",
               "v2": "22:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "22:00",
               "vt": "str",
               "v2": "23:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "23:00",
               "vt": "str",
               "v2": "24:00",
               "v2t": "str"
           }
       ],
       "checkall": "false",
       "repair": false,
       "outputs": 5,
       "x": 780,
       "y": 160,
       "wires": [
           [
               "11d5c223.e9692e"
           ],
           [
               "5b3e5dc0.e43c84"
           ],
           [
               "9c7d7d2e.50637"
           ],
           [
               "4a57bb1a.df9924"
           ],
           [
               "fb565e5a.fe907"
           ]
       ]
   },
   {
       "id": "51b555c8.ab71cc",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "Change $moment",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "{\"weekday\":\"\",\"time\":\"\"}",
               "tot": "json"
           },
           {
               "t": "set",
               "p": "payload.weekday",
               "pt": "msg",
               "to": "$moment().locale(\"de\").tz('Europe/Berlin').format('dddd')",
               "tot": "jsonata"
           },
           {
               "t": "set",
               "p": "payload.time",
               "pt": "msg",
               "to": "$moment().locale(\"de\").tz('Europe/Berlin').format('HH:mm')",
               "tot": "jsonata"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 190,
       "y": 260,
       "wires": [
           [
               "87830eea.d7c75"
           ]
       ]
   },
   {
       "id": "5b3e5dc0.e43c84",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 120,
       "wires": [
           []
       ]
   },
   {
       "id": "9c7d7d2e.50637",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "17°C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 160,
       "wires": [
           []
       ]
   },
   {
       "id": "4a57bb1a.df9924",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "19 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "19",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 200,
       "wires": [
           []
       ]
   },
   {
       "id": "fb565e5a.fe907",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 240,
       "wires": [
           []
       ]
   },
   {
       "id": "fd71c298.e38d",
       "type": "switch",
       "z": "4c7438ae.bcfe38",
       "name": "Automatik <Template> - Zeitprofil Sa + So",
       "property": "payload.time",
       "propertyType": "msg",
       "rules": [
           {
               "t": "btwn",
               "v": "00:00",
               "vt": "str",
               "v2": "08:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "08:00",
               "vt": "str",
               "v2": "09:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "09:00",
               "vt": "str",
               "v2": "22:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "22:00",
               "vt": "str",
               "v2": "23:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "23:00",
               "vt": "str",
               "v2": "24:00",
               "v2t": "str"
           }
       ],
       "checkall": "false",
       "repair": false,
       "outputs": 5,
       "x": 780,
       "y": 380,
       "wires": [
           [
               "13a2b125.6ee33f"
           ],
           [
               "fdd1014.e542e"
           ],
           [
               "957e2c3a.ab6f6"
           ],
           [
               "92e95f00.95ffb"
           ],
           [
               "130aec2a.282f04"
           ]
       ]
   },
   {
       "id": "fdd1014.e542e",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "topic",
               "pt": "msg",
               "to": "SaSo-Periode1",
               "tot": "str"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 340,
       "wires": [
           []
       ]
   },
   {
       "id": "87830eea.d7c75",
       "type": "switch",
       "z": "4c7438ae.bcfe38",
       "name": "Selektiere Wochentage",
       "property": "payload.weekday",
       "propertyType": "msg",
       "rules": [
           {
               "t": "regex",
               "v": "Montag|Dienstag|Mittwoch|Donnerstag|Freitag",
               "vt": "str",
               "case": true
           },
           {
               "t": "regex",
               "v": "Samstag|Sonntag",
               "vt": "str",
               "case": true
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 430,
       "y": 260,
       "wires": [
           [
               "ea94e8f5.b33ed8"
           ],
           [
               "fd71c298.e38d"
           ]
       ]
   },
   {
       "id": "957e2c3a.ab6f6",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "topic",
               "pt": "msg",
               "to": "SaSo-Periode1",
               "tot": "str"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 380,
       "wires": [
           []
       ]
   },
   {
       "id": "92e95f00.95ffb",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 420,
       "wires": [
           []
       ]
   },
   {
       "id": "130aec2a.282f04",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 460,
       "wires": [
           []
       ]
   },
   {
       "id": "13a2b125.6ee33f",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "topic",
               "pt": "msg",
               "to": "SaSo-Periode1",
               "tot": "str"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 300,
       "wires": [
           []
       ]
   },
   {
       "id": "11d5c223.e9692e",
       "type": "change",
       "z": "4c7438ae.bcfe38",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 80,
       "wires": [
           []
       ]
   },
   {
       "id": "82638b0c.eb3498",
       "type": "subflow",
       "name": "MAX Auto Bad",
       "info": "# MAX Wochenprofil erstellen",
       "category": "MAX Auto Profil",
       "in": [
           {
               "x": 40,
               "y": 260,
               "wires": [
                   {
                       "id": "39d58864.e30568"
                   }
               ]
           }
       ],
       "out": [
           {
               "x": 1240,
               "y": 260,
               "wires": [
                   {
                       "id": "d23bc85e.43b228",
                       "port": 0
                   },
                   {
                       "id": "b9148fcf.db6b7",
                       "port": 0
                   },
                   {
                       "id": "3859cbf8.efeb64",
                       "port": 0
                   },
                   {
                       "id": "3687dedb.049902",
                       "port": 0
                   },
                   {
                       "id": "a1ea0b5e.c64828",
                       "port": 0
                   },
                   {
                       "id": "ce13d754.54b508",
                       "port": 0
                   },
                   {
                       "id": "7a662555.d7e99c",
                       "port": 0
                   },
                   {
                       "id": "b8f81c14.7e00e",
                       "port": 0
                   },
                   {
                       "id": "22fce80d.d8032",
                       "port": 0
                   }
               ]
           }
       ],
       "env": [],
       "meta": {},
       "color": "#FFAAAA",
       "outputLabels": [
           "AUTO Temperatur"
       ],
       "icon": "font-awesome/fa-thermometer-2"
   },
   {
       "id": "54394067.3d759",
       "type": "switch",
       "z": "82638b0c.eb3498",
       "name": "Automatik <Template>- Zeitprofil Mo - Fr",
       "property": "payload.time",
       "propertyType": "msg",
       "rules": [
           {
               "t": "btwn",
               "v": "00:00",
               "vt": "str",
               "v2": "08:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "08:00",
               "vt": "str",
               "v2": "09:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "09:00",
               "vt": "str",
               "v2": "22:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "22:00",
               "vt": "str",
               "v2": "23:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "23:00",
               "vt": "str",
               "v2": "24:00",
               "v2t": "str"
           }
       ],
       "checkall": "false",
       "repair": false,
       "outputs": 5,
       "x": 780,
       "y": 160,
       "wires": [
           [
               "d23bc85e.43b228"
           ],
           [
               "b9148fcf.db6b7"
           ],
           [
               "3859cbf8.efeb64"
           ],
           [
               "3687dedb.049902"
           ],
           [
               "a1ea0b5e.c64828"
           ]
       ]
   },
   {
       "id": "39d58864.e30568",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "Change $moment",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "{\"weekday\":\"\",\"time\":\"\"}",
               "tot": "json"
           },
           {
               "t": "set",
               "p": "payload.weekday",
               "pt": "msg",
               "to": "$moment().locale(\"de\").tz('Europe/Berlin').format('dddd')",
               "tot": "jsonata"
           },
           {
               "t": "set",
               "p": "payload.time",
               "pt": "msg",
               "to": "$moment().locale(\"de\").tz('Europe/Berlin').format('HH:mm')",
               "tot": "jsonata"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 190,
       "y": 260,
       "wires": [
           [
               "223e7dcb.393e22"
           ]
       ]
   },
   {
       "id": "b9148fcf.db6b7",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 120,
       "wires": [
           []
       ]
   },
   {
       "id": "3859cbf8.efeb64",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "17°C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 160,
       "wires": [
           []
       ]
   },
   {
       "id": "3687dedb.049902",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 200,
       "wires": [
           []
       ]
   },
   {
       "id": "a1ea0b5e.c64828",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 240,
       "wires": [
           []
       ]
   },
   {
       "id": "e4cd333c.7cb3c",
       "type": "switch",
       "z": "82638b0c.eb3498",
       "name": "Automatik <Template> - Zeitprofil Sa + So",
       "property": "payload.time",
       "propertyType": "msg",
       "rules": [
           {
               "t": "btwn",
               "v": "00:00",
               "vt": "str",
               "v2": "08:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "08:00",
               "vt": "str",
               "v2": "09:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "09:00",
               "vt": "str",
               "v2": "22:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "22:00",
               "vt": "str",
               "v2": "23:00",
               "v2t": "str"
           },
           {
               "t": "btwn",
               "v": "23:00",
               "vt": "str",
               "v2": "24:00",
               "v2t": "str"
           }
       ],
       "checkall": "false",
       "repair": false,
       "outputs": 5,
       "x": 780,
       "y": 380,
       "wires": [
           [
               "ce13d754.54b508"
           ],
           [
               "7a662555.d7e99c"
           ],
           [
               "b8f81c14.7e00e"
           ],
           [
               "f6138415.06d2f8"
           ],
           [
               "22fce80d.d8032"
           ]
       ]
   },
   {
       "id": "7a662555.d7e99c",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "topic",
               "pt": "msg",
               "to": "SaSo-Periode1",
               "tot": "str"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 340,
       "wires": [
           []
       ]
   },
   {
       "id": "223e7dcb.393e22",
       "type": "switch",
       "z": "82638b0c.eb3498",
       "name": "Selektiere Wochentage",
       "property": "payload.weekday",
       "propertyType": "msg",
       "rules": [
           {
               "t": "regex",
               "v": "Montag|Dienstag|Mittwoch|Donnerstag|Freitag",
               "vt": "str",
               "case": true
           },
           {
               "t": "regex",
               "v": "Samstag|Sonntag",
               "vt": "str",
               "case": true
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 430,
       "y": 260,
       "wires": [
           [
               "54394067.3d759"
           ],
           [
               "e4cd333c.7cb3c"
           ]
       ]
   },
   {
       "id": "b8f81c14.7e00e",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "topic",
               "pt": "msg",
               "to": "SaSo-Periode1",
               "tot": "str"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 380,
       "wires": [
           []
       ]
   },
   {
       "id": "f6138415.06d2f8",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "22 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "22",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 420,
       "wires": [
           []
       ]
   },
   {
       "id": "22fce80d.d8032",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 460,
       "wires": [
           []
       ]
   },
   {
       "id": "ce13d754.54b508",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "topic",
               "pt": "msg",
               "to": "SaSo-Periode1",
               "tot": "str"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 300,
       "wires": [
           []
       ]
   },
   {
       "id": "d23bc85e.43b228",
       "type": "change",
       "z": "82638b0c.eb3498",
       "name": "17 °C",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "17",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1070,
       "y": 80,
       "wires": [
           []
       ]
   },
   {
       "id": "ab72ca6c.56b658",
       "type": "ioBroker in",
       "z": "6f3801b9.ba4b6",
       "name": "absenceAll",
       "topic": "0_userdata.0.testType",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "true",
       "x": 730,
       "y": 940,
       "wires": [
           [
               "7fb84e52.ded01"
           ]
       ]
   },
   {
       "id": "7fb84e52.ded01",
       "type": "switch",
       "z": "6f3801b9.ba4b6",
       "name": "alle weg?",
       "property": "payload",
       "propertyType": "msg",
       "rules": [
           {
               "t": "true"
           },
           {
               "t": "false"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 900,
       "y": 940,
       "wires": [
           [
               "ccc4a8e2.b3d208"
           ],
           [
               "d9b6f8e1.43a028",
               "cb6c610c.b148b"
           ]
       ]
   },
   {
       "id": "ccc4a8e2.b3d208",
       "type": "change",
       "z": "6f3801b9.ba4b6",
       "name": "setze Temperatur auf 4.5 Grad",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "4.5",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1160,
       "y": 880,
       "wires": [
           [
               "42b431b2.7dc6b",
               "bbdabb1a.476468"
           ]
       ]
   },
   {
       "id": "42b431b2.7dc6b",
       "type": "ioBroker out",
       "z": "6f3801b9.ba4b6",
       "name": "setze setpoint Bad",
       "topic": "0_userdata.0.testType",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1470,
       "y": 820,
       "wires": []
   },
   {
       "id": "bbdabb1a.476468",
       "type": "ioBroker out",
       "z": "6f3801b9.ba4b6",
       "name": "setze setpoint Schlafzimmer",
       "topic": "0_userdata.0.testType",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1500,
       "y": 860,
       "wires": []
   },
   {
       "id": "d9b6f8e1.43a028",
       "type": "subflow:82638b0c.eb3498",
       "z": "6f3801b9.ba4b6",
       "name": "",
       "x": 1200,
       "y": 960,
       "wires": [
           [
               "42b431b2.7dc6b",
               "88838135.299f8"
           ]
       ]
   },
   {
       "id": "cb6c610c.b148b",
       "type": "subflow:4c7438ae.bcfe38",
       "z": "6f3801b9.ba4b6",
       "name": "",
       "x": 1170,
       "y": 1000,
       "wires": [
           [
               "bbdabb1a.476468",
               "88838135.299f8"
           ]
       ]
   },
   {
       "id": "88838135.299f8",
       "type": "delay",
       "z": "6f3801b9.ba4b6",
       "name": "",
       "pauseType": "delay",
       "timeout": "1",
       "timeoutUnits": "minutes",
       "rate": "1",
       "nbRateUnits": "1",
       "rateUnits": "second",
       "randomFirst": "1",
       "randomLast": "5",
       "randomUnits": "seconds",
       "drop": false,
       "x": 1460,
       "y": 980,
       "wires": [
           [
               "ca582e80.a5362"
           ]
       ]
   },
   {
       "id": "ca582e80.a5362",
       "type": "change",
       "z": "6f3801b9.ba4b6",
       "name": "setze AUTO(0)",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "0",
               "tot": "num"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 1660,
       "y": 980,
       "wires": [
           [
               "37a8e748.b93b78",
               "db3c124d.be0ee"
           ]
       ]
   },
   {
       "id": "37a8e748.b93b78",
       "type": "ioBroker out",
       "z": "6f3801b9.ba4b6",
       "name": "setze mode Bad",
       "topic": "0_userdata.0.testType",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1880,
       "y": 960,
       "wires": []
   },
   {
       "id": "db3c124d.be0ee",
       "type": "ioBroker out",
       "z": "6f3801b9.ba4b6",
       "name": "setze mode Schlafzimmer",
       "topic": "0_userdata.0.testType",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1910,
       "y": 1000,
       "wires": []
   }
]

Jetzt muss man halt noch in die iobroker in und out Nodes - die entsprechenden Datenpunkte setzen-

Und das ankommen?
Es gibt ein present_count als Zahl. Einer da=1 Zwei da=2

[mickym]

@marko1974 Ist doch wie in Deinem Blockly.

In dem Switch alle weg= wird dich geprüft ob der absenceAll Node true oder false ist. Wenn also false dann wird der untere Flow abgearbeitet auf AUTO Temperatur gesetzt und nach einer Minute der Modus auf AUTO

Wo zu ist es wichtig wieviele da sind. Ich dachte die absenceALL Node wird false, sobald EINER da ist.

Du kannst natürlich auch den present_count als Input nehmen.

Dann musst halt im oberen Ausgang auf 0 und im unteren auf größer 0 prüfen. Mir ist das egal.

Dann aber schauen, dass Du mit Zahlen vergleichst:

Inzwischen solltest Du die Basics verstehen

[Marko1974]

@mickym Aber wenn einer wiederkommt oder gar nicht da ist bleibt es kalt.

[Marko1974]

@mickym

[mickym]

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym xxx

Hat doch perfekt ausgesehen. Ok - hast halt noch die fehlenden Verkabelungen nachgereicht.

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym xxx

Hat doch perfekt ausgesehen.

Nein...hatte was vergessen

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym xxx

Ok - hast halt noch die fehlenden Verkabelungen nachgereicht.

DAS SOLLTEST DU GAAAAR NICHT SEHEN.
Es war nur 1 sekunde online

[mickym]

@marko1974 Wie gesagt - Du hast ja nun das Basisprinzip von NodeRed verstanden und wenn Du present_count lieber nehmen willst - kannst ja die Switch Node ändern.

Und wenn Dir NodeRed nicht mehr gefällt, dann solltest Du aber nun die Logik verstehen und dann kannst Du es ja selbst wieder in Blockly umsetzen.

[Marko1974]

@mickym Mir gefiel node-red schon immer. Hatte frueher die max thermostate NUR in Node red. Nur ohne ioBroker. Probiert habe ich schon alles.

Hmmm...ob absence all false wird wenn einer da ist weiss ich nicht. Müsste eigentlich, der Logik nach.

Boar...ich muss ins Bett. Gleich arbeiten. Ich verabschiede mich, sage nochmal 1000 Dank und melde mich morgen.

[mickym]

@marko1974 Dann schlaf gut.

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 Dann schlaf gut.

Dito!

[Marko1974]

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym xxx

Hat doch perfekt ausgesehen. Ok - hast halt noch die fehlenden Verkabelungen nachgereicht.

Telegram daran wäre noch gut. Alle Heizungen aus - alle an

[mickym]

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym said in MAX! Cube Blockly Abwesenheit:

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym xxx

Hat doch perfekt ausgesehen. Ok - hast halt noch die fehlenden Verkabelungen nachgereicht.

Telegram daran wäre noch gut. Alle Heizungen aus - alle an

@marko1974 Das hast doch sicher einen Adapter und einen Datenpunkt wohin man den Text schreiben muss.

Ich habe gerade die Hilfe im Telegramm Adapter gelesen:

Im Prinzip musst also nur den Text an den Datenpunkt telegram0.communicate.response schicken. Den müsstest Du haben.

und unten halt - Alle Heizungen eingeschaltet - das sollte aber nun kein Problem sein.

[mickym]

@marko1974 sagte in MAX! Cube Blockly Abwesenheit:

@mickym

Leider sind noch ein paar Änderungen erforderlich - damit das wie gewünscht funktioniert.

Die Delay Node - solltest Du gegen folgende Trigger Node tauschen - sonst braucht es 6 Minuten bis alle Modi gesetzt sind - es ging aber nur darum jedes Modus Änderung nach 1 Minute der setpoint Änderung durch zu führen.

Spoiler

[
   {
       "id": "376a8206.8eb7de",
       "type": "trigger",
       "z": "6f3801b9.ba4b6",
       "name": "",
       "op1": "",
       "op2": "",
       "op1type": "nul",
       "op2type": "pay",
       "duration": "1",
       "extend": false,
       "overrideDelay": false,
       "units": "min",
       "reset": "",
       "bytopic": "topic",
       "topic": "topic",
       "outputs": 1,
       "x": 1480,
       "y": 980,
       "wires": [
           [
               "ca582e80.a5362"
           ]
       ]
   }
]

In dem Template ist leider noch ein Fehler. Also musst Du alle Template Nodes den Topic noch löschen der ersten beiden Topics am Wochenende rauslöschen:

Markierte Nodes.

Dies ist wichtig damit das Topic aus den ALEXA Nodes durchgereicht wird.

Dafür müssen wir bei dem An-/Abwesenheitsflow für die Trigger Node - den Topic setzen.

Und topic halt entsprechend den vorangegangenen Topic setzen.

Ich hatte mir überlegt, ob man das Topic in den Subflow setzen sollte - aber finde es so besser - da so die Orginal msg.topic der Alexa Node durchgelassen wird.