[ Geklärt ] Problem bei Influx Installation

crunchip

@Altersrentner probier mal bei Host, anstatt "localhost" die Ip deines Rechners bei den Settings einzutragen.

Edit:
was gibt folgendes aus?

systemctl status influxdb

Altersrentner

@crunchip
Brachte keine Änderung

influxdb.0	2020-12-20 11:36:27.294	error	(14640) Error: connect ECONNREFUSED 192.168.178.41:8086
influxdb.0	2020-12-20 11:36:27.290	info	(14640) Connecting http://192.168.178.41:8086 ...
fhem.0	2020-12-20 11:36:25.223	info	(835) Update channel: WattUsageAnDummy | fhem.0.WattUsageAnDummy - native
fhem.0	2020-12-20 11:36:25.218	info	(835) check channel fhem.0.WattUsageAnDummy | name: WattUsa

Altersrentner

@crunchip

pi@raspberrypi:~ $ sudo systemctl status influxdb
● influxdb.service - InfluxDB is an open-source, distributed, time series database
   Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabl
   Active: failed (Result: exit-code) since Sun 2020-12-20 11:12:30 CET; 27min ago
     Docs: https://docs.influxdata.com/influxdb/
  Process: 12273 ExecStart=/usr/bin/influxd -config /etc/influxdb/influxdb.conf $INFLU
 Main PID: 12273 (code=exited, status=1/FAILURE)

Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms exp
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, resta
Dec 20 11:12:30 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distribute
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Start request repeated too q
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Failed with result 'exit-cod
Dec 20 11:12:30 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, di
lines 1-13/13 (END)...skipping...
● influxdb.service - InfluxDB is an open-source, distributed, time series database
   Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabl
   Active: failed (Result: exit-code) since Sun 2020-12-20 11:12:30 CET; 27min ago
     Docs: https://docs.influxdata.com/influxdb/
  Process: 12273 ExecStart=/usr/bin/influxd -config /etc/influxdb/influxdb.conf $INFLU
 Main PID: 12273 (code=exited, status=1/FAILURE)

Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms exp
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, resta
Dec 20 11:12:30 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distribute
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Start request repeated too q
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Failed with result 'exit-cod
Dec 20 11:12:30 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, di
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-13/13 (END)
● influxdb.service - InfluxDB is an open-source, distributed, time series database
   Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sun 2020-12-20 11:12:30 CET; 27min ago
     Docs: https://docs.influxdata.com/influxdb/
  Process: 12273 ExecStart=/usr/bin/influxd -config /etc/influxdb/influxdb.conf $INFLUXD_OPTS (code=exited, s
 Main PID: 12273 (code=exited, status=1/FAILURE)

Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms expired, scheduling restar
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5.
Dec 20 11:12:30 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distributed, time series database
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Start request repeated too quickly.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Failed with result 'exit-code'.
Dec 20 11:12:30 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, distributed, time series
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-13/13 (END)
● influxdb.service - InfluxDB is an open-source, distributed, time series database
   Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sun 2020-12-20 11:12:30 CET; 27min ago
     Docs: https://docs.influxdata.com/influxdb/
  Process: 12273 ExecStart=/usr/bin/influxd -config /etc/influxdb/influxdb.conf $INFLUXD_OPTS (code=exited, status=1/FAILURE)
 Main PID: 12273 (code=exited, status=1/FAILURE)

Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms expired, scheduling restart.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5.
Dec 20 11:12:30 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distributed, time series database.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Start request repeated too quickly.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Failed with result 'exit-code'.
Dec 20 11:12:30 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, distributed, time series database.
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-13/13 (END)
● influxdb.service - InfluxDB is an open-source, distributed, time series database
   Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sun 2020-12-20 11:12:30 CET; 27min ago
     Docs: https://docs.influxdata.com/influxdb/
  Process: 12273 ExecStart=/usr/bin/influxd -config /etc/influxdb/influxdb.conf $INFLUXD_OPTS (code=exited, status=1/FAILURE)
 Main PID: 12273 (code=exited, status=1/FAILURE)

Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms expired, scheduling restart.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5.
Dec 20 11:12:30 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distributed, time series database.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Start request repeated too quickly.
Dec 20 11:12:30 raspberrypi systemd[1]: influxdb.service: Failed with result 'exit-code'.
Dec 20 11:12:30 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, distributed, time series database.
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-13/13 (END)

crunchip

@Altersrentner ok, also da kann auch keine Verbindung zustande kommen, da dein Influx gar nicht läuft.
wie oder nach welcher Anleitung hast du denn installiert?

Thomas Braun

@Altersrentner
Ganz doofe Frage:

apt policy influxdb

Altersrentner

@crunchip

wget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add -
source /etc/os-release
echo "deb https://repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list

sudo apt-get update
sudo apt-get install influxdb

sudo service influxdb start

sudo influx

Jetzt sollte es eigentlich laufen

Altersrentner

@Thomas-Braun said in Problem bei Influx Installation:

pi@raspberrypi:~ $ sudo service influxdb start
pi@raspberrypi:~ $ sudo influx
Failed to connect to http://localhost:8086: Get http://localhost:8086/ping: dial tcp [::1]:8086: connect: connection refused
Please check your connection settings and ensure 'influxd' is running.
pi@raspberrypi:~ $ sudo apt policy influxdb
influxdb:
  Installed: 1.8.3-1
  Candidate: 1.8.3-1
  Version table:
 *** 1.8.3-1 500
        500 https://repos.influxdata.com/debian buster/stable armhf Packages
        100 /var/lib/dpkg/status
     1.6.4-1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
pi@raspberrypi:~ $

crunchip

ok, hast zwar noch die "alte" Version aber sollte passen.
ist dein Port vllt belegt?

netstat -tulpen

Altersrentner

@crunchip said in Problem bei Influx Installation:

netstat -tulpen

Leider das selbe Ergebnis:anguished:

pi@raspberrypi:~ $ sudo netstat -tulpen
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       17609      637/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       17608      637/iobroker.js-con
tcp        0      0 192.168.178.41:2000     0.0.0.0:*               LISTEN      1001       20269      1195/io.hm-rpc.2
tcp        0      0 192.168.178.41:2001     0.0.0.0:*               LISTEN      1001       20769      1156/io.hm-rpc.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15904      644/sshd
tcp        0      0 127.0.0.1:6010          0.0.0.0:*               LISTEN      1000       285748     16680/sshd: pi@pts/
tcp        0      0 192.168.178.41:8701     0.0.0.0:*               LISTEN      1001       20759      1175/io.hm-rpc.1
tcp6       0      0 :::61991                :::*                    LISTEN      1001       19711      903/io.harmony.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       17670      662/io.admin.0
tcp6       0      0 :::8083                 :::*                    LISTEN      1001       17292      1127/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       16792      731/io.socketio.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          15906      644/sshd
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       20792      1237/io.terminal.0
tcp6       0      0 ::1:6010                :::*                    LISTEN      1000       285747     16680/sshd: pi@pts/
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14271      402/avahi-daemon: r
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       19712      903/io.harmony.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       17212      1093/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15151      636/dhcpcd
udp        0      0 0.0.0.0:43619           0.0.0.0:*                           108        14273      402/avahi-daemon: r
udp        0      0 0.0.0.0:9898            0.0.0.0:*                           1001       18957      869/io.mihome.0
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1001       18929      858/io.mihome-vacuu
udp6       0      0 :::5353                 :::*                                108        14272      402/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          18566      636/dhcpcd
udp6       0      0 :::51291                :::*                                108        14274      402/avahi-daemon: r
pi@raspberrypi:~ $ sudo influx
Failed to connect to http://localhost:8086: Get http://localhost:8086/ping: dial tcp [::1]:8086: connect: connection refused
Please check your connection settings and ensure 'influxd' is running.
pi@raspberrypi:~ $

crunchip

@Altersrentner
Standardmäßig verwendet InfluxDB die folgenden Netzwerkports:

Der TCP-Port 8086 ist für die Client-Server-Kommunikation über die InfluxDB-API verfügbar.
Der TCP-Port 8088 steht dem RPC-Dienst zur Verfügung, um Sicherungs- und Wiederherstellungsvorgänge durchzuführen.

bei dir ist, siehe Zeile 16 dein iobroker terminal auf port 8088, bin mir da nicht sicher ob das Probleme bereitet
@Altersrentner änder mal deinen terminal port in iobroker und probier es dann nochmal den Service enable, start....
siehe auch hier
https://forum.iobroker.net/post/378412

Altersrentner

@crunchip
ich verzweifle bald

Zustand wie gehabt

Habe jetzt mal
influxd eingegeben

pi@raspberrypi:~ $ sudo influxd

 8888888           .d888 888                   8888888b.  888888b.
   888            d88P"  888                   888  "Y88b 888  "88b
   888            888    888                   888    888 888  .88P
   888   88888b.  888888 888 888  888 888  888 888    888 8888888K.
   888   888 "88b 888    888 888  888  Y8bd8P' 888    888 888  "Y88b
   888   888  888 888    888 888  888   X88K   888    888 888    888
   888   888  888 888    888 Y88b 888 .d8""8b. 888  .d88P 888   d88P
 8888888 888  888 888    888  "Y88888 888  888 8888888P"  8888888P"

2020-12-20T13:31:40.279443Z     info    InfluxDB starting       {"log_id": "0RC5QVTG000", "version": "1.8.3", "branch": "1.8", "commit": "563e6                            c3d1a7a2790763c6289501095dbec19244e"}
2020-12-20T13:31:40.280532Z     info    Go runtime      {"log_id": "0RC5QVTG000", "version": "go1.13.8", "maxprocs": 4}
2020-12-20T13:31:41.290904Z     info    Using data dir  {"log_id": "0RC5QVTG000", "service": "store", "path": "/var/lib/influxdb/data"}
2020-12-20T13:31:41.293624Z     info    Compaction settings     {"log_id": "0RC5QVTG000", "service": "store", "max_concurrent_compactions": 2,                             "throughput_bytes_per_second": 50331648, "throughput_bytes_per_second_burst": 50331648}
2020-12-20T13:31:41.296007Z     info    Open store (start)      {"log_id": "0RC5QVTG000", "service": "store", "trace_id": "0RC5QZRl000", "op_na                            me": "tsdb_open", "op_event": "start"}
2020-12-20T13:31:41.298469Z     info    Open store (end)        {"log_id": "0RC5QVTG000", "service": "store", "trace_id": "0RC5QZRl000", "op_na                            me": "tsdb_open", "op_event": "end", "op_elapsed": "2.477ms"}
2020-12-20T13:31:41.300868Z     info    Opened service  {"log_id": "0RC5QVTG000", "service": "subscriber"}
2020-12-20T13:31:41.310202Z     info    Starting monitor service        {"log_id": "0RC5QVTG000", "service": "monitor"}
2020-12-20T13:31:41.312167Z     info    Registered diagnostics client   {"log_id": "0RC5QVTG000", "service": "monitor", "name": "build"}
2020-12-20T13:31:41.312781Z     info    Registered diagnostics client   {"log_id": "0RC5QVTG000", "service": "monitor", "name": "runtime"}
2020-12-20T13:31:41.313403Z     info    Registered diagnostics client   {"log_id": "0RC5QVTG000", "service": "monitor", "name": "network"}
2020-12-20T13:31:41.313732Z     info    Registered diagnostics client   {"log_id": "0RC5QVTG000", "service": "monitor", "name": "system"}
2020-12-20T13:31:41.314463Z     info    Starting precreation service    {"log_id": "0RC5QVTG000", "service": "shard-precreation", "check_interv                            al": "10m", "advance_period": "30m"}
2020-12-20T13:31:41.315897Z     info    Starting snapshot service       {"log_id": "0RC5QVTG000", "service": "snapshot"}
2020-12-20T13:31:41.316280Z     info    Storing statistics      {"log_id": "0RC5QVTG000", "service": "monitor", "db_instance": "_internal", "db                            _rp": "monitor", "interval": "10s"}
2020-12-20T13:31:41.317118Z     info    Starting continuous query service       {"log_id": "0RC5QVTG000", "service": "continuous_querier"}
2020-12-20T13:31:41.319668Z     info    Starting HTTP service   {"log_id": "0RC5QVTG000", "service": "httpd", "authentication": false}
2020-12-20T13:31:41.321326Z     info    opened HTTP access log  {"log_id": "0RC5QVTG000", "service": "httpd", "path": "stderr"}
2020-12-20T13:31:41.322670Z     info    Listening on HTTP       {"log_id": "0RC5QVTG000", "service": "httpd", "addr": "[::]:8086", "https": fal                            se}
2020-12-20T13:31:41.326261Z     info    Starting retention policy enforcement service   {"log_id": "0RC5QVTG000", "service": "retention", "chec                            k_interval": "30m"}
2020-12-20T13:31:41.327863Z     info    Sending usage statistics to usage.influxdata.com        {"log_id": "0RC5QVTG000"}
2020-12-20T13:31:41.331840Z     info    Listening for signals   {"log_id": "0RC5QVTG000"}
2020-12-20T13:31:44.084613Z     info    Executing query {"log_id": "0RC5QVTG000", "service": "query", "query": "SHOW DATABASES"}
[httpd] 192.168.178.41 - admin [20/Dec/2020:14:31:44 +0100] "GET /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=show+databases&u=admin HTTP                            /1.1" 200 84 "-" "-" b3681eb6-42c7-11eb-8001-dca6321bbd83 9249
2020-12-20T13:31:54.107193Z     info    Executing query {"log_id": "0RC5QVTG000", "service": "query", "query": "SHOW DATABASES"}
[httpd] 192.168.178.41 - admin [20/Dec/2020:14:31:54 +0100] "GET /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=show+databases&u=admin HTTP                            /1.1" 200 84 "-" "-" b9620632-42c7-11eb-8002-dca6321bbd83 1031
2020-12-20T13:32:04.115541Z     info    Executing query {"log_id": "0RC5QVTG000", "service": "query", "query": "SHOW DATABASES"}
[httpd] 192.168.178.41 - admin [20/Dec/2020:14:32:04 +0100] "GET /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=show+databases&u=admin HTTP                            /1.1" 200 109 "-" "-" bf592910-42c7-11eb-8003-dca6321bbd83 2055833
2020-12-20T13:32:06.177505Z     info    Executing query {"log_id": "0RC5QVTG000", "service": "query", "query": "CREATE DATABASE iobroker"}
[httpd] 192.168.178.41 - admin [20/Dec/2020:14:32:06 +0100] "POST /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=create+database+%22iobroke                            r%22&u=admin HTTP/1.1" 200 33 "-" "-" c093ce61-42c7-11eb-8004-dca6321bbd83 468972
2020-12-20T13:32:06.651822Z     info    Executing query {"log_id": "0RC5QVTG000", "service": "query", "query": "CREATE RETENTION POLICY global                             ON iobroker DURATION 365d REPLICATION 1 DEFAULT"}
[httpd] 192.168.178.41 - admin [20/Dec/2020:14:32:06 +0100] "GET /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=CREATE+RETENTION+POLICY+%22                            global%22+ON+iobroker+DURATION+31536000s+REPLICATION+1+DEFAULT&u=admin HTTP/1.1" 200 232 "-" "-" c0dc2b88-42c7-11eb-8005-dca6321bbd83 2247119
2020-12-20T13:32:08.905601Z     info    Executing query {"log_id": "0RC5QVTG000", "service": "query", "query": "SHOW DATABASES"}
[httpd] 192.168.178.41 - admin [20/Dec/2020:14:32:08 +0100] "GET /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=show+databases&u=admin HTTP                            /1.1" 200 122 "-" "-" c234151c-42c7-11eb-8006-dca6321bbd83 2841

Kannst Du hier etwas lokalisierne?

crunchip

@Altersrentner es läuft immer noch auf port 8088, gegebenenfalls system neustarten.
danach nochmal prüfen, wenn dieser port dann auf 8090 läuft
nochmal

sudo systemctl daemon-reload
sudo systemctl enable influxdb
sudo systemctl start influxdb

anschliessend prüfen, ob influx läuft mit

sudo systemctl status influx

@Altersrentner sagte in Problem bei Influx Installation:

Kannst Du hier etwas lokalisierne?

dein influx läuft noch nicht

Altersrentner

@crunchip
jetzt wird influx nicht mehr gefunden

pi@raspberrypi:~ $ sudo iobroker stop
pi@raspberrypi:~ $ sudo iobroker restart
pi@raspberrypi:~ $ sudo systemctl daemon-reload
pi@raspberrypi:~ $ sudo systemctl enable influxdb
pi@raspberrypi:~ $ sudo systemctl start influxdb
pi@raspberrypi:~ $ sudo systemctl status influx
Unit influx.service could not be found.
pi@raspberrypi:~ $

crunchip

@Altersrentner mein Fehler

sudo systemctl status influxdb

Altersrentner

@crunchip

pi@raspberrypi:~ $ sudo systemctl status influxdb
● influxdb.service - InfluxDB is an open-source, distributed, time series database
   Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sun 2020-12-20 14:47:04 CET; 12min ago
     Docs: https://docs.influxdata.com/influxdb/
  Process: 22523 ExecStart=/usr/bin/influxd -config /etc/influxdb/influxdb.conf $INFLUXD_OPTS (code=exited, status=1/FAILURE)
 Main PID: 22523 (code=exited, status=1/FAILURE)

Dec 20 14:47:04 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms expired, scheduling restart.
Dec 20 14:47:04 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5.
Dec 20 14:47:04 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distributed, time series database.
Dec 20 14:47:04 raspberrypi systemd[1]: influxdb.service: Start request repeated too quickly.
Dec 20 14:47:04 raspberrypi systemd[1]: influxdb.service: Failed with result 'exit-code'.
Dec 20 14:47:04 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, distributed, time series database.
pi@raspberrypi:~ $

konnte nicht gestartet werden

crunchip

@Altersrentner weil ich gerade systemd.... lese
geb mal folgendes ein

sudo systemctl unmask influxdb.service
sudo systemctl start influxdb

und prüfe danach ob der service läuft

Altersrentner

@crunchip

pi@raspberrypi:~ $ sudo systemctl unmask influxdb.service
pi@raspberrypi:~ $ sudo systemctl start influxdb
pi@raspberrypi:~ $ sudo influxd

 8888888           .d888 888                   8888888b.  888888b.
   888            d88P"  888                   888  "Y88b 888  "88b
   888            888    888                   888    888 888  .88P
   888   88888b.  888888 888 888  888 888  888 888    888 8888888K.
   888   888 "88b 888    888 888  888  Y8bd8P' 888    888 888  "Y88b
   888   888  888 888    888 888  888   X88K   888    888 888    888
   888   888  888 888    888 Y88b 888 .d8""8b. 888  .d88P 888   d88P
 8888888 888  888 888    888  "Y88888 888  888 8888888P"  8888888P"

2020-12-20T14:15:35.152027Z     info    InfluxDB starting       {"log_id": "0RC7wJwl000", "version": "1.8.3", "branch": "1.8", "commit": "563e6c3d1a7a2790763c6289501095dbec19244e"}
2020-12-20T14:15:35.152128Z     info    Go runtime      {"log_id": "0RC7wJwl000", "version": "go1.13.8", "maxprocs": 4}
2020-12-20T14:15:35.253479Z     info    Using data dir  {"log_id": "0RC7wJwl000", "service": "store", "path": "/var/lib/influxdb/data"}
2020-12-20T14:15:35.253597Z     info    Compaction settings     {"log_id": "0RC7wJwl000", "service": "store", "max_concurrent_compactions": 2, "throughput_bytes_per_second": 50331648, "throughput_bytes_per_second_burst": 50331648}
2020-12-20T14:15:35.253674Z     info    Open store (start)      {"log_id": "0RC7wJwl000", "service": "store", "trace_id": "0RC7wKLG000", "op_name": "tsdb_open", "op_event": "start"}
2020-12-20T14:15:35.257327Z     info    Reading file    {"log_id": "0RC7wJwl000", "engine": "tsm1", "service": "cacheloader", "path": "/var/lib/influxdb/wal/_internal/monitor/1/_00001.wal", "size": 132881}
2020-12-20T14:15:37.573216Z     info    Opened shard    {"log_id": "0RC7wJwl000", "service": "store", "trace_id": "0RC7wKLG000", "op_name": "tsdb_open", "index_version": "inmem", "path": "/var/lib/influxdb/data/_internal/monitor/1", "duration": "2317.079ms"}
2020-12-20T14:15:37.573402Z     info    Open store (end)        {"log_id": "0RC7wJwl000", "service": "store", "trace_id": "0RC7wKLG000", "op_name": "tsdb_open", "op_event": "end", "op_elapsed": "2319.731ms"}
2020-12-20T14:15:37.573525Z     info    Opened service  {"log_id": "0RC7wJwl000", "service": "subscriber"}
2020-12-20T14:15:37.573570Z     info    Starting monitor service        {"log_id": "0RC7wJwl000", "service": "monitor"}
2020-12-20T14:15:37.573611Z     info    Registered diagnostics client   {"log_id": "0RC7wJwl000", "service": "monitor", "name": "build"}
2020-12-20T14:15:37.573649Z     info    Registered diagnostics client   {"log_id": "0RC7wJwl000", "service": "monitor", "name": "runtime"}
2020-12-20T14:15:37.573688Z     info    Registered diagnostics client   {"log_id": "0RC7wJwl000", "service": "monitor", "name": "network"}
2020-12-20T14:15:37.573737Z     info    Registered diagnostics client   {"log_id": "0RC7wJwl000", "service": "monitor", "name": "system"}
2020-12-20T14:15:37.573810Z     info    Starting precreation service    {"log_id": "0RC7wJwl000", "service": "shard-precreation", "check_interval": "10m", "advance_period": "30m"}
2020-12-20T14:15:37.573888Z     info    Starting snapshot service       {"log_id": "0RC7wJwl000", "service": "snapshot"}
2020-12-20T14:15:37.573929Z     info    Starting continuous query service       {"log_id": "0RC7wJwl000", "service": "continuous_querier"}
2020-12-20T14:15:37.573983Z     info    Starting HTTP service   {"log_id": "0RC7wJwl000", "service": "httpd", "authentication": false}
2020-12-20T14:15:37.574022Z     info    opened HTTP access log  {"log_id": "0RC7wJwl000", "service": "httpd", "path": "stderr"}
2020-12-20T14:15:37.574321Z     info    Storing statistics      {"log_id": "0RC7wJwl000", "service": "monitor", "db_instance": "_internal", "db_rp": "monitor", "interval": "10s"}
2020-12-20T14:15:37.574445Z     info    Listening on HTTP       {"log_id": "0RC7wJwl000", "service": "httpd", "addr": "[::]:8086", "https": false}
2020-12-20T14:15:37.574529Z     info    Starting retention policy enforcement service   {"log_id": "0RC7wJwl000", "service": "retention", "check_interval": "30m"}
2020-12-20T14:15:37.574895Z     info    Sending usage statistics to usage.influxdata.com        {"log_id": "0RC7wJwl000"}
2020-12-20T14:15:37.575398Z     info    Listening for signals   {"log_id": "0RC7wJwl000"}
2020-12-20T14:15:43.954822Z     info    Executing query {"log_id": "0RC7wJwl000", "service": "query", "query": "SHOW DATABASES"}
[httpd] 192.168.178.41 - MEB [20/Dec/2020:15:15:43 +0100] "GET /query?db=iobroker&p=%5BREDACTED%5D&precision=ms&q=show+databases&u=MEB HTTP/1.1" 200 122 "-" "-" d8e47f87-42cd-11eb-8001-dca6321bbd83 5504

crunchip

@Altersrentner sudo systemctl status influxdb

Altersrentner

@crunchip
Jetzt hat der influxdb.0 Adapter auf grün gewechselt.:blush:
Wenn ich aber auf "Verbindung testen" gehe,
gibt es keine Reaktion.
Ist das normal?

crunchip

@Altersrentner sagte in Problem bei Influx Installation:

Wenn ich aber auf "Verbindung testen" geh

im Iobroker? ja

Community Forum

NEWS

[ Geklärt ] Problem bei Influx Installation

Support us

684

32.6k

82.3k

1.3m