Nach Shutdown vom Raspberry ioBroker weg
-
@Glasfaser das ist jetzt der USB Stick mit 8GB.
Also halten die doch nicht länger. LOL
Und nun?
Nils
Ich glaube nicht das er defekt ist ...
(8.02 GB/7.47 GiB)hat du mal nach dem mount des Sticks geschaut .......
...... deshalb habe ich dir den Link von deinem alten Thread auch genannt .! -
@Glasfaser das ist jetzt der USB Stick mit 8GB.
Also halten die doch nicht länger. LOL
Und nun?
Nils
mount | grep ^/dev cat /etc/fstab -
mount | grep ^/dev cat /etc/fstabpi@iobrokerpi:~ $ mount | grep ^/dev /dev/sda2 on / type ext4 (rw,noatime) /dev/sda1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) pi@iobrokerpi:~ $ cat /etc/fstab proc /proc proc defaults 0 0 PARTUUID=6c586e13-01 /boot vfat defaults 0 2 PARTUUID=6c586e13-02 / ext4 defaults,noatime 0 1 # a swapfile is not a swap partition, no line here # use dphys-swapfile swap[on|off] for that //medianas/intern /home/pi/nas_intern cifs username=iobroker,password=xxxxxxxxxxxx,vers=1.0,users,auto,user_xattr 0 0 -
Zeige mal :
cd /opt/iobroker iobroker status iobroker list adapters iobroker list instances ls -lund der ioBroker läuft von USB.
[ 3.192557] scsi 0:0:0:0: Direct-Access Intenso Micro Line 1.01 PQ: 0 ANSI: [ 3.193622] sd 0:0:0:0: [sda] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 3.193971] sd 0:0:0:0: [sda] Write Protect is off [ 3.194003] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 3.194374] sd 0:0:0:0: [sda] No Caching mode page found [ 3.194407] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.197846] sda: sda1 sda [ 3.200748] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.236260] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.236345] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 3.246542] devtmpfs: mounted [ 3.254441] Freeing unused kernel memory: 2048KIst das der Stick mit 8 GB !?
EDIT :
siehe dazu in deinem anderen Thread !
.
Link Text
.@Glasfaser said in Nach Shutdown vom Raspberry ioBroker weg:
iobroker status
iobroker list adapters
iobroker list instances
ls -lpi@iobrokerpi:~ $ iobroker status No objects found! pi@iobrokerpi:~ $ iobroker list adapters No objects found! pi@iobrokerpi:~ $ iobroker list instances No objects found! pi@iobrokerpi:~ $ ls -l total 0 drwxrwxrwx 12 root root 0 Aug 24 17:05 nas_intern -
@Glasfaser said in Nach Shutdown vom Raspberry ioBroker weg:
iobroker status
iobroker list adapters
iobroker list instances
ls -lpi@iobrokerpi:~ $ iobroker status No objects found! pi@iobrokerpi:~ $ iobroker list adapters No objects found! pi@iobrokerpi:~ $ iobroker list instances No objects found! pi@iobrokerpi:~ $ ls -l total 0 drwxrwxrwx 12 root root 0 Aug 24 17:05 nas_interncd /opt/iobroker ls -la -
cd /opt/iobroker ls -la@Thomas-Braun said in Nach Shutdown vom Raspberry ioBroker weg:
cd /opt/iobroker
ls -lapi@iobrokerpi:/opt/iobroker $ ls -la total 308 drwxrwxrwx+ 9 iobroker iobroker 4096 Sep 16 14:19 . drwxr-xr-x 4 root root 4096 Oct 21 2019 .. drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 16 13:10 backups drwxrwxrwx+ 2 iobroker iobroker 12288 Sep 17 17:08 cache -rwxrwxrwx+ 1 iobroker iobroker 1049 Oct 21 2019 CHANGELOG_FIXER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 3556 Oct 21 2019 CHANGELOG_INSTALLER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 23988 Oct 21 2019 fix_installation.sh drwxrwxrwx+ 3 iobroker iobroker 4096 Oct 21 2019 install -rwxrwxrwx+ 1 iobroker iobroker 371 Sep 16 14:19 INSTALLER_INFO.txt lrwxrwxrwx 1 iobroker iobroker 22 Sep 16 14:19 iob -> /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 305 Sep 16 14:19 iobroker drwxrwxrwx+ 8 iobroker iobroker 4096 Sep 15 15:57 iobroker-data drwxrwxrwx+ 2 iobroker iobroker 4096 Oct 21 2019 lib -rwxrwxrwx+ 1 iobroker iobroker 1137 Oct 21 2019 LICENSE drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 26 11:36 log drwxrwxrwx+ 805 iobroker iobroker 28672 Sep 15 16:14 node_modules -rwxrwxrwx+ 1 iobroker iobroker 109 Sep 16 14:18 .npmrc -rwxrwxrwx+ 1 iobroker iobroker 1861 Sep 15 16:14 package.json -rwxrwxrwx+ 1 iobroker iobroker 169201 Oct 21 2019 package-lock.json -rwxrwxrwx+ 1 iobroker iobroker 6101 Oct 21 2019 README.md -rwxrwxrwx+ 1 iobroker iobroker 5728 Sep 16 15:31 reinstall.js -
@Thomas-Braun said in Nach Shutdown vom Raspberry ioBroker weg:
cd /opt/iobroker
ls -lapi@iobrokerpi:/opt/iobroker $ ls -la total 308 drwxrwxrwx+ 9 iobroker iobroker 4096 Sep 16 14:19 . drwxr-xr-x 4 root root 4096 Oct 21 2019 .. drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 16 13:10 backups drwxrwxrwx+ 2 iobroker iobroker 12288 Sep 17 17:08 cache -rwxrwxrwx+ 1 iobroker iobroker 1049 Oct 21 2019 CHANGELOG_FIXER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 3556 Oct 21 2019 CHANGELOG_INSTALLER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 23988 Oct 21 2019 fix_installation.sh drwxrwxrwx+ 3 iobroker iobroker 4096 Oct 21 2019 install -rwxrwxrwx+ 1 iobroker iobroker 371 Sep 16 14:19 INSTALLER_INFO.txt lrwxrwxrwx 1 iobroker iobroker 22 Sep 16 14:19 iob -> /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 305 Sep 16 14:19 iobroker drwxrwxrwx+ 8 iobroker iobroker 4096 Sep 15 15:57 iobroker-data drwxrwxrwx+ 2 iobroker iobroker 4096 Oct 21 2019 lib -rwxrwxrwx+ 1 iobroker iobroker 1137 Oct 21 2019 LICENSE drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 26 11:36 log drwxrwxrwx+ 805 iobroker iobroker 28672 Sep 15 16:14 node_modules -rwxrwxrwx+ 1 iobroker iobroker 109 Sep 16 14:18 .npmrc -rwxrwxrwx+ 1 iobroker iobroker 1861 Sep 15 16:14 package.json -rwxrwxrwx+ 1 iobroker iobroker 169201 Oct 21 2019 package-lock.json -rwxrwxrwx+ 1 iobroker iobroker 6101 Oct 21 2019 README.md -rwxrwxrwx+ 1 iobroker iobroker 5728 Sep 16 15:31 reinstall.js./iobroker status -
@Thomas-Braun said in Nach Shutdown vom Raspberry ioBroker weg:
cd /opt/iobroker
ls -lapi@iobrokerpi:/opt/iobroker $ ls -la total 308 drwxrwxrwx+ 9 iobroker iobroker 4096 Sep 16 14:19 . drwxr-xr-x 4 root root 4096 Oct 21 2019 .. drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 16 13:10 backups drwxrwxrwx+ 2 iobroker iobroker 12288 Sep 17 17:08 cache -rwxrwxrwx+ 1 iobroker iobroker 1049 Oct 21 2019 CHANGELOG_FIXER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 3556 Oct 21 2019 CHANGELOG_INSTALLER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 23988 Oct 21 2019 fix_installation.sh drwxrwxrwx+ 3 iobroker iobroker 4096 Oct 21 2019 install -rwxrwxrwx+ 1 iobroker iobroker 371 Sep 16 14:19 INSTALLER_INFO.txt lrwxrwxrwx 1 iobroker iobroker 22 Sep 16 14:19 iob -> /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 305 Sep 16 14:19 iobroker drwxrwxrwx+ 8 iobroker iobroker 4096 Sep 15 15:57 iobroker-data drwxrwxrwx+ 2 iobroker iobroker 4096 Oct 21 2019 lib -rwxrwxrwx+ 1 iobroker iobroker 1137 Oct 21 2019 LICENSE drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 26 11:36 log drwxrwxrwx+ 805 iobroker iobroker 28672 Sep 15 16:14 node_modules -rwxrwxrwx+ 1 iobroker iobroker 109 Sep 16 14:18 .npmrc -rwxrwxrwx+ 1 iobroker iobroker 1861 Sep 15 16:14 package.json -rwxrwxrwx+ 1 iobroker iobroker 169201 Oct 21 2019 package-lock.json -rwxrwxrwx+ 1 iobroker iobroker 6101 Oct 21 2019 README.md -rwxrwxrwx+ 1 iobroker iobroker 5728 Sep 16 15:31 reinstall.jsSynology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
-
@Glasfaser hab das selbe ergebnis
which iobroker ls -la /usr/bin/iobroker ls -la /opt/iobroker/iobroker -
which iobroker ls -la /usr/bin/iobroker ls -la /opt/iobroker/iobrokerThomas, zunächst einmal danke dass du dir die Zeit nimmst.
Wonach suchst Du genau? Bin bei Linux leider nur soweit bewandert wie ich es immer brauche. Vielleicht kannst du ein zwei worte dazu sagen. Danke Dir
Nils
pi@iobrokerpi:~ $ which iobroker /usr/bin/iobroker pi@iobrokerpi:~ $ ls -la /usr/bin/iobroker lrwxrwxrwx 1 root root 22 Sep 16 14:19 /usr/bin/iobroker -> /opt/iobroker/iobroker pi@iobrokerpi:~ $ ls -la /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 305 Sep 16 14:19 /opt/iobroker/iobroker pi@iobrokerpi:~ $ -
in htop ist kein iobroker aufgelistet.
-
@Thomas-Braun said in Nach Shutdown vom Raspberry ioBroker weg:
cd /opt/iobroker
ls -lapi@iobrokerpi:/opt/iobroker $ ls -la total 308 drwxrwxrwx+ 9 iobroker iobroker 4096 Sep 16 14:19 . drwxr-xr-x 4 root root 4096 Oct 21 2019 .. drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 16 13:10 backups drwxrwxrwx+ 2 iobroker iobroker 12288 Sep 17 17:08 cache -rwxrwxrwx+ 1 iobroker iobroker 1049 Oct 21 2019 CHANGELOG_FIXER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 3556 Oct 21 2019 CHANGELOG_INSTALLER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 23988 Oct 21 2019 fix_installation.sh drwxrwxrwx+ 3 iobroker iobroker 4096 Oct 21 2019 install -rwxrwxrwx+ 1 iobroker iobroker 371 Sep 16 14:19 INSTALLER_INFO.txt lrwxrwxrwx 1 iobroker iobroker 22 Sep 16 14:19 iob -> /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 305 Sep 16 14:19 iobroker drwxrwxrwx+ 8 iobroker iobroker 4096 Sep 15 15:57 iobroker-data drwxrwxrwx+ 2 iobroker iobroker 4096 Oct 21 2019 lib -rwxrwxrwx+ 1 iobroker iobroker 1137 Oct 21 2019 LICENSE drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 26 11:36 log drwxrwxrwx+ 805 iobroker iobroker 28672 Sep 15 16:14 node_modules -rwxrwxrwx+ 1 iobroker iobroker 109 Sep 16 14:18 .npmrc -rwxrwxrwx+ 1 iobroker iobroker 1861 Sep 15 16:14 package.json -rwxrwxrwx+ 1 iobroker iobroker 169201 Oct 21 2019 package-lock.json -rwxrwxrwx+ 1 iobroker iobroker 6101 Oct 21 2019 README.md -rwxrwxrwx+ 1 iobroker iobroker 5728 Sep 16 15:31 reinstall.js@jmeister79 sagte in Nach Shutdown vom Raspberry ioBroker weg:
drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 26 11:36 log
das ist das letzte Lebenszeichen ....
Zeige mal :
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejsSynology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
in htop ist kein iobroker aufgelistet.
@jmeister79
Und jag den Fixer mal über das System:curl -sL https://iobroker.net/fix.sh | bash - -
@jmeister79 sagte in Nach Shutdown vom Raspberry ioBroker weg:
drwxrwxrwx+ 2 iobroker iobroker 4096 Sep 26 11:36 log
das ist das letzte Lebenszeichen ....
Zeige mal :
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs@Glasfaser said in Nach Shutdown vom Raspberry ioBroker weg:
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs
Hatte letzte woche einmal komplett geupdatet. also müsste es recht frisch sein.
Der Stick ist von letzter Woche Komplett gesichert. Und gestern nacht lief ein backitup. also sind hopfen und malz nicht verloren. Aber wäre mal interessant zu wissen was nun wieder schief gelaufen ist...pi@iobrokerpi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.18.4 /usr/bin/node v12.18.4 /usr/bin/npm 6.14.6 nodejs: Installed: 12.18.4-1nodesource1 Candidate: 12.18.4-1nodesource1 Version table: *** 12.18.4-1nodesource1 500 500 https://deb.nodesource.com/node_12.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.21.0~dfsg-1~deb10u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages pi@iobrokerpi:~ $ -
@jmeister79
Und jag den Fixer mal über das System:curl -sL https://iobroker.net/fix.sh | bash -========================================================================== Welcome to the ioBroker installation fixer! Script version: 2020-06-15 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== Get:1 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB] Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Hit:3 https://deb.nodesource.com/node_12.x buster InRelease Get:4 http://archive.raspberrypi.org/debian buster/main armhf Packages [331 kB] Get:5 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB] Get:6 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.7 kB] Fetched 13.4 MB in 13s (1,007 kB/s) Reading package lists... Done Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... chown: changing ownership of '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/jest-resolve-dependencies/node_modules/ansi-styles/readme.md': Structure needs cleaning chown: changing ownership of '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/jest-resolve-dependencies/node_modules/ansi-styles/readme.md': Structure needs cleaning This system does not support setting default permissions. Do not use npm to manually install adapters unless you know what you are doing! ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== -
========================================================================== Welcome to the ioBroker installation fixer! Script version: 2020-06-15 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== Get:1 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB] Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Hit:3 https://deb.nodesource.com/node_12.x buster InRelease Get:4 http://archive.raspberrypi.org/debian buster/main armhf Packages [331 kB] Get:5 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB] Get:6 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.7 kB] Fetched 13.4 MB in 13s (1,007 kB/s) Reading package lists... Done Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... chown: changing ownership of '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/jest-resolve-dependencies/node_modules/ansi-styles/readme.md': Structure needs cleaning chown: changing ownership of '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/jest-resolve-dependencies/node_modules/ansi-styles/readme.md': Structure needs cleaning This system does not support setting default permissions. Do not use npm to manually install adapters unless you know what you are doing! ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ==========================================================================@jmeister79
und jetzt :cd /opt/iobroker iobroker start iobroker status iobroker list instancesSynology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@jmeister79
und jetzt :cd /opt/iobroker iobroker start iobroker status iobroker list instances:-(
pi@iobrokerpi:~ $ cd /opt/iobroker pi@iobrokerpi:/opt/iobroker $ pi@iobrokerpi:/opt/iobroker $ iobroker start pi@iobrokerpi:/opt/iobroker $ pi@iobrokerpi:/opt/iobroker $ iobroker status No objects found! pi@iobrokerpi:/opt/iobroker $ pi@iobrokerpi:/opt/iobroker $ iobroker list instances No objects found! -
========================================================================== Welcome to the ioBroker installation fixer! Script version: 2020-06-15 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== Get:1 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB] Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Hit:3 https://deb.nodesource.com/node_12.x buster InRelease Get:4 http://archive.raspberrypi.org/debian buster/main armhf Packages [331 kB] Get:5 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB] Get:6 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.7 kB] Fetched 13.4 MB in 13s (1,007 kB/s) Reading package lists... Done Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... chown: changing ownership of '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/jest-resolve-dependencies/node_modules/ansi-styles/readme.md': Structure needs cleaning chown: changing ownership of '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/jest-resolve-dependencies/node_modules/ansi-styles/readme.md': Structure needs cleaning This system does not support setting default permissions. Do not use npm to manually install adapters unless you know what you are doing! ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ==========================================================================@jmeister79 sagte in Nach Shutdown vom Raspberry ioBroker weg:
This system does not support setting default permissions.
das habt ihr aber gesehen?
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@jmeister79 sagte in Nach Shutdown vom Raspberry ioBroker weg:
This system does not support setting default permissions.
das habt ihr aber gesehen?
Ja ..
ist bei mir auch ( Syn Docker ) , deshalb nicht beachtet :
========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker sudo: Hostname iobroker kann nicht aufgelöst werden: Der Name oder der Dienst ist nicht bekannt sudo: Hostname iobroker kann nicht aufgelöst werden: Der Name oder der Dienst ist nicht bekannt Fixing directory permissions... This system does not support setting default permissions. Do not use npm to manually install adapters unless you know what you are doing! ==========================================================================Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden484
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge