Zigbee CC2538+CC2592 Firmware Update
-
@Rushmed sagte in Zigbee CC2538+CC2592 Firmware Update:
Muss ich nach dem Firmwareflash alle geräte neu anlernen oder bleiben die Verbindungen?
Die Antwort dieser Frage hält mich noch vom Update ab.
-
@Rushmed sagte in Zigbee CC2538+CC2592 Firmware Update:
@Rushmed sagte in Zigbee CC2538+CC2592 Firmware Update:
Muss ich nach dem Firmwareflash alle geräte neu anlernen oder bleiben die Verbindungen?
Die Antwort dieser Frage hält mich noch vom Update ab.
Ich habe gestern auf einem Stick von arteck das Update eingespielt und musste alle Geräte neu anlernen. Mein Eindruck dabei war allerdings, dass das Anlernen nicht so sauber lief, wie mit der ursprünglichen Firmware. Bin am überlegen, wieder zurück zu flashen.
-
@Kentrath Vielen Dank, dann gedulde ich mich noch etwas mit dem Update.
-
Ich habe auch noch die Rev. 20200327 drauf und hatte Probleme, dass absolut keine Geräte angelernt werden konnten.
Also, hatte ich alles gelöscht, Instanz gelöscht, Adapter (1.4) gelöscht.
Jetzt frage ich mich aber auch welche FW auf den Stick soll.
Was ist der Unterschied zwischen MODKAMRU und JH (JetHome?)
Welche ist empfehlenswert?Nachtrag:
Komme mit dem Segger nicht mehr auf den Chip.
Ausgaben:Connecting ... - Connecting via USB to probe/ programmer device 0 - Probe/ Programmer firmware: J-Link ARM V6 compiled Jun 20 2012 19:43:26 - Device "CC2538" selected. - Target interface speed: 4000 kHz (Fixed) - VTarget = 3.306V - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x7FFFFFFF - ERROR: InitTarget(): PCode returned with error code -1 InitTarget(): PCode returned with error code -1 - ERROR: Failed to connect. Could not establish a connection to target. -
@hg6806
Mach von JH 20201010 drauf. -
@dimaiv
OK danke. Kannst du mir noch sagen, wieso ich mit dem Segger nichts programmieren kann?
Mit einem zweiten 2538 Stick das Gleiche.Ging aber mal.
-
@hg6806 falsch angeschlossen?
-
@dimaiv
Also das Löschen hat geklappt mit dem Lite Programm.
Aber die neue FW kann ich nicht programmieren.
Gleiches Problem wie @trottellumme
Die alte MODKAMRU FW kann ich programmieren.
Liegt am HEX file.Auch ich habe im Browser Rechtklick auf die Datei - Download.
Dann den Stick kurz stromlos gemacht und versucht zu programmieren. Nicht.
Wie gesagt, die alte FW geht. -
Hab's hingekriegt indem ich den kompletten Ordner als ZIP runtergalden habe und dann wieder entpackt.
-
@hg6806
So ist es auch richtig
-
Ich habe gerade die JH 20201010 geflashed und hatte Probleme beim Anleren und dann auch bei der Funktion.
Bspw. stürzt der Adapter beim Tastendruck auf einem Tradfri Dimmer ab. Daraufhin habe ich die Modkram installiert und habe dort die selben Probleme.zigbee.0 2020-12-26 19:19:52.893 warn (12560) DeviceConfigure failed 0x680ae2fffe0a50c2 TRADFRI on/off switch, attempt 1 (Error: Bind 0x680ae2fffe0a50c2/1 genOnOff from '901' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onT zigbee.0 2020-12-26 19:19:42.884 info (12560) Zigbee started zigbee.0 2020-12-26 19:19:42.883 info (12560) 0x680ae2fffe0a50c2 (addr 11019): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:19:42.877 info (12560) Configuring 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:19:42.874 info (12560) Currently 1 devices are joined: zigbee.0 2020-12-26 19:19:42.867 info (12560) --> transmitPower : low zigbee.0 2020-12-26 19:19:42.864 info (12560) Disable LED zigbee.0 2020-12-26 19:19:42.860 info (12560) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200327}} zigbee.0 2020-12-26 19:19:40.976 info (12560) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:19:40.834 info (12560) Starting Zigbee npm ... zigbee.0 2020-12-26 19:19:40.733 info (12560) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:19:07.875 info (10797) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:19:07.874 info (10797) terminating zigbee.0 2020-12-26 19:19:07.609 info (10797) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:19:07.607 info (10797) cleaned everything up... zigbee.0 2020-12-26 19:19:07.606 error (10797) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at runMicrotasks (<anonymous>) at proce zigbee.0 2020-12-26 19:19:07.605 error (10797) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 19:19:07.605 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:19:02.177 info (10797) Configuring 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:19:02.153 info (10797) Device '0x680ae2fffe0a50c2' is supported, identified as: IKEA TRADFRI ON/OFF switch (E1743) zigbee.0 2020-12-26 19:19:02.152 info (10797) Successfully interviewed '0x680ae2fffe0a50c2', device has succesfully been paired zigbee.0 2020-12-26 19:18:58.864 info (10797) Zigbee: stop joining zigbee.0 2020-12-26 19:18:27.625 info (10797) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:18:21.548 info (10797) Zigbee: stop joining zigbee.0 2020-12-26 19:17:50.308 info (10797) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:17:42.078 info (10797) Zigbee: stop joining zigbee.0 2020-12-26 19:17:23.050 info (10797) Starting interview of '0x680ae2fffe0a50c2' zigbee.0 2020-12-26 19:17:10.846 info (10797) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:16:39.935 info (10797) Zigbee started zigbee.0 2020-12-26 19:16:39.934 info (10797) Currently no devices. zigbee.0 2020-12-26 19:16:39.929 info (10797) --> transmitPower : low zigbee.0 2020-12-26 19:16:39.924 info (10797) Disable LED zigbee.0 2020-12-26 19:16:39.920 info (10797) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200327}} zigbee.0 2020-12-26 19:16:32.202 info (10797) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:16:32.063 info (10797) Starting Zigbee npm ... zigbee.0 2020-12-26 19:16:31.967 info (10797) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:16:01.171 info (10494) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:16:01.169 info (10494) terminating zigbee.0 2020-12-26 19:16:01.146 error (10494) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Func zigbee.0 2020-12-26 19:16:01.144 error (10494) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2020-12-26 19:16:01.143 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:16:01.142 error (10494) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group. zigbee.0 2020-12-26 19:16:01.139 info (10494) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:16:01.136 info (10494) cleaned everything up... zigbee.0 2020-12-26 19:16:01.134 error (10494) Error: SRSP - ZDO - startupFromApp after 20000ms at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35) at listOnTimeout (internal/timers.js:55 zigbee.0 2020-12-26 19:16:01.133 error (10494) unhandled promise rejection: SRSP - ZDO - startupFromApp after 20000ms zigbee.0 2020-12-26 19:16:01.132 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:15:37.596 info (10494) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:15:37.437 info (10494) Starting Zigbee npm ... zigbee.0 2020-12-26 19:15:37.340 info (10494) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:09:34.655 info (7014) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2020-12-26 19:09:34.654 info (7014) terminating zigbee.0 2020-12-26 19:09:34.381 info (7014) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:09:34.378 info (7014) cleaned everything up... zigbee.0 2020-12-26 19:09:34.375 info (7014) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-12-26 19:09:00.163 info (7014) Zigbee started zigbee.0 2020-12-26 19:09:00.162 info (7014) 0x680ae2fffe0a50c2 (addr 64288): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:09:00.159 info (7014) 0x00158d000450d167 (addr 34485): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2020-12-26 19:09:00.154 info (7014) Currently 2 devices are joined: zigbee.0 2020-12-26 19:09:00.148 info (7014) --> transmitPower : low zigbee.0 2020-12-26 19:09:00.144 info (7014) Disable LED zigbee.0 2020-12-26 19:09:00.140 info (7014) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:08:58.311 info (7014) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:08:58.178 info (7014) Starting Zigbee npm ... zigbee.0 2020-12-26 19:08:58.063 info (7014) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:08:25.116 info (4018) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:08:25.113 info (4018) terminating zigbee.0 2020-12-26 19:08:24.820 info (4018) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:08:24.819 info (4018) cleaned everything up... zigbee.0 2020-12-26 19:08:24.818 error (4018) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at runMicrotasks (<anonymous>) at proces zigbee.0 2020-12-26 19:08:24.817 error (4018) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 19:08:24.817 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:08:11.513 info (4018) Zigbee: stop joining zigbee.0 2020-12-26 19:07:53.347 info (4018) DeviceConfigure successful 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:07:44.038 info (4018) Configuring 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:07:44.036 info (4018) Device '0x680ae2fffe0a50c2' is supported, identified as: IKEA TRADFRI ON/OFF switch (E1743) zigbee.0 2020-12-26 19:07:44.035 info (4018) Successfully interviewed '0x680ae2fffe0a50c2', device has succesfully been paired zigbee.0 2020-12-26 19:07:40.295 info (4018) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:06:05.002 info (4018) Zigbee: stop joining zigbee.0 2020-12-26 19:05:53.243 info (4018) Starting interview of '0x680ae2fffe0a50c2' zigbee.0 2020-12-26 19:05:33.771 info (4018) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:04:20.002 info (4018) Device '0x00158d000450d167' is supported, identified as: Xiaomi Aqara human body movement and illuminance sensor (RTCGQ11LM) zigbee.0 2020-12-26 19:04:20.000 info (4018) Successfully interviewed '0x00158d000450d167', device has succesfully been paired zigbee.0 2020-12-26 19:03:32.965 info (4018) Zigbee: stop joining zigbee.0 2020-12-26 19:03:13.850 info (4018) Starting interview of '0x00158d000450d167' zigbee.0 2020-12-26 19:03:01.705 info (4018) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:02:55.034 info (4018) Zigbee started zigbee.0 2020-12-26 19:02:55.033 info (4018) Currently no devices. zigbee.0 2020-12-26 19:02:55.027 info (4018) --> transmitPower : low zigbee.0 2020-12-26 19:02:55.023 info (4018) Disable LED zigbee.0 2020-12-26 19:02:55.019 info (4018) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:02:53.134 info (4018) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:02:52.996 info (4018) Starting Zigbee npm ... zigbee.0 2020-12-26 19:02:52.901 info (4018) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:02:42.279 info (3500) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:02:41.813 info (3500) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:02:41.812 info (3500) terminating zigbee.0 2020-12-26 19:02:41.753 error (3500) Failed to stop zigbee (Error: Cannot execute command, in Inter-PAN mode at ZStackAdapter.checkInterpanLock (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAda zigbee.0 2020-12-26 19:02:41.741 info (3500) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:02:41.738 info (3500) cleaned everything up... zigbee.0 2020-12-26 19:02:41.737 error (3500) Error: Cannot execute command, in Inter-PAN mode at ZStackAdapter.checkInterpanLock (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:875:19) at zigbee.0 2020-12-26 19:02:41.736 error (3500) unhandled promise rejection: Cannot execute command, in Inter-PAN mode zigbee.0 2020-12-26 19:02:41.736 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:02:41.732 info (3500) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:01:42.480 error (3500) Device 0x00158d000450d167 "undefined" not described in statesMapping. zigbee.0 2020-12-26 19:01:42.439 info (3500) Zigbee started zigbee.0 2020-12-26 19:01:42.438 info (3500) 0x00158d000450d167 (addr 9233): Not supported (model undefined)(Unknown) zigbee.0 2020-12-26 19:01:42.436 info (3500) 0x680ae2fffe0a50c2 (addr 29150): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:01:42.429 info (3500) Currently 2 devices are joined: zigbee.0 2020-12-26 19:01:42.421 info (3500) --> transmitPower : low zigbee.0 2020-12-26 19:01:42.418 info (3500) Disable LED zigbee.0 2020-12-26 19:01:42.414 info (3500) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:01:40.502 info (3500) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:01:40.362 info (3500) Starting Zigbee npm ... zigbee.0 2020-12-26 19:01:40.264 info (3500) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:01:17.929 info (2509) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:01:17.928 info (2509) terminating zigbee.0 2020-12-26 19:01:17.423 info (2509) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:01:17.421 info (2509) cleaned everything up... zigbee.0 2020-12-26 19:01:17.420 error (2509) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at processTicksAndRejections (internal/proce zigbee.0 2020-12-26 19:01:17.419 error (2509) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 19:01:17.418 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:00:20.578 error (2509) Device 0x00158d000450d167 "undefined" not described in statesMapping. zigbee.0 2020-12-26 19:00:20.530 info (2509) Zigbee started zigbee.0 2020-12-26 19:00:20.527 info (2509) 0x00158d000450d167 (addr 9233): Not supported (model undefined)(Unknown) zigbee.0 2020-12-26 19:00:20.524 info (2509) 0x680ae2fffe0a50c2 (addr 29150): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:00:20.516 info (2509) Currently 2 devices are joined: zigbee.0 2020-12-26 19:00:20.491 info (2509) --> transmitPower : low zigbee.0 2020-12-26 19:00:20.487 info (2509) Disable LED zigbee.0 2020-12-26 19:00:20.483 info (2509) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:00:17.150 info (2509) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:00:16.988 info (2509) Starting Zigbee npm ... zigbee.0 2020-12-26 19:00:16.875 info (2509) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6Was ist mein Problem?
-
@Rushmed
Installier mal Zigbee Adapter von Github, da ist es behoben, bin mir fast sicher.
-
@dimaiv Das hat nur etwas geholfen. Die meisten Ikea Geräte bringen den Adapter immer zum Absturz.
Auf welche FW sollte ich am sinnvollsten downgraden? -
@Rushmed
Habe gerade bei mir probiert, funktioniert fehlerfrei. Nur anlernen von tradfri Taster (egal 5er oder 2er) läuft nicht so wie früher, mann muss die ganze zeit drauf drücken, 1 mal pro sek.
Dann mach die Firmware von 0211, zu finden auf Koenkk Github Seite. -
@dimaiv Funktionieren alle Tasten bei dir?
Ich finde nur:
-
@Rushmed
liegt unter develop.
https://github.com/Koenkk/Z-Stack-firmware/tree/develop/coordinator/Z-Stack_3.0.x/binJa, alle Tasten und Taster funktionieren fehlerfrei.
-
@dimaiv Danke erstmal.
Das Problem bleibt bestehen.
Von der 5er Tradfri remote bringen zwei Tasten den Adapter zum Ansturz.
zigbee.0 2020-12-26 21:33:51.004 error (873) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at runMicrotasks (<anonymous>) at process zigbee.0 2020-12-26 21:33:51.003 error (873) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 21:33:51.003 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 21:33:36.946 warn (873) DeviceConfigure failed 0x680ae2fffe0a50c2 TRADFRI on/off switch, attempt 1 (Error: Bind 0x680ae2fffe0a50c2/1 genPowerCfg from '0x00124b00192e81f8/1' failed (AREQ - ZDO - bindRsp after 10000ms)Zur Info, ich habe nach deiner Anleitung jedoch mit Version 6.9 des Lite Flashers installiert. Kann das meine Probleme verusachen?
@arteck Ich habe den Stick von dir, hast du evtl. noch die Firmware die bei der Auslieferung drauf war? Ich denke das war eine Version vom Februar 2020.
-
@Rushmed
Version von Lite Flasher macht nix, war damals aktuell.
Ich habe dir doch die Firmware von Februar verlinkt, 0211. -
@dimaiv Ja und von der ist der letzte Log.
-
@Rushmed
Dann ist nich die Firmware Schuld.
Mach komplett neue Installation von Zigbee Adapter.
Adapter entfernen.
Ordner zigbee_0 löschen.
Adapter installieren.
