Zigbee CC2538+CC2592 Firmware Update
-
Hab's hingekriegt indem ich den kompletten Ordner als ZIP runtergalden habe und dann wieder entpackt.
-
@hg6806
So ist es auch richtig
-
Ich habe gerade die JH 20201010 geflashed und hatte Probleme beim Anleren und dann auch bei der Funktion.
Bspw. stürzt der Adapter beim Tastendruck auf einem Tradfri Dimmer ab. Daraufhin habe ich die Modkram installiert und habe dort die selben Probleme.zigbee.0 2020-12-26 19:19:52.893 warn (12560) DeviceConfigure failed 0x680ae2fffe0a50c2 TRADFRI on/off switch, attempt 1 (Error: Bind 0x680ae2fffe0a50c2/1 genOnOff from '901' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onT zigbee.0 2020-12-26 19:19:42.884 info (12560) Zigbee started zigbee.0 2020-12-26 19:19:42.883 info (12560) 0x680ae2fffe0a50c2 (addr 11019): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:19:42.877 info (12560) Configuring 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:19:42.874 info (12560) Currently 1 devices are joined: zigbee.0 2020-12-26 19:19:42.867 info (12560) --> transmitPower : low zigbee.0 2020-12-26 19:19:42.864 info (12560) Disable LED zigbee.0 2020-12-26 19:19:42.860 info (12560) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200327}} zigbee.0 2020-12-26 19:19:40.976 info (12560) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:19:40.834 info (12560) Starting Zigbee npm ... zigbee.0 2020-12-26 19:19:40.733 info (12560) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:19:07.875 info (10797) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:19:07.874 info (10797) terminating zigbee.0 2020-12-26 19:19:07.609 info (10797) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:19:07.607 info (10797) cleaned everything up... zigbee.0 2020-12-26 19:19:07.606 error (10797) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at runMicrotasks (<anonymous>) at proce zigbee.0 2020-12-26 19:19:07.605 error (10797) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 19:19:07.605 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:19:02.177 info (10797) Configuring 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:19:02.153 info (10797) Device '0x680ae2fffe0a50c2' is supported, identified as: IKEA TRADFRI ON/OFF switch (E1743) zigbee.0 2020-12-26 19:19:02.152 info (10797) Successfully interviewed '0x680ae2fffe0a50c2', device has succesfully been paired zigbee.0 2020-12-26 19:18:58.864 info (10797) Zigbee: stop joining zigbee.0 2020-12-26 19:18:27.625 info (10797) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:18:21.548 info (10797) Zigbee: stop joining zigbee.0 2020-12-26 19:17:50.308 info (10797) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:17:42.078 info (10797) Zigbee: stop joining zigbee.0 2020-12-26 19:17:23.050 info (10797) Starting interview of '0x680ae2fffe0a50c2' zigbee.0 2020-12-26 19:17:10.846 info (10797) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:16:39.935 info (10797) Zigbee started zigbee.0 2020-12-26 19:16:39.934 info (10797) Currently no devices. zigbee.0 2020-12-26 19:16:39.929 info (10797) --> transmitPower : low zigbee.0 2020-12-26 19:16:39.924 info (10797) Disable LED zigbee.0 2020-12-26 19:16:39.920 info (10797) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200327}} zigbee.0 2020-12-26 19:16:32.202 info (10797) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:16:32.063 info (10797) Starting Zigbee npm ... zigbee.0 2020-12-26 19:16:31.967 info (10797) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:16:01.171 info (10494) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:16:01.169 info (10494) terminating zigbee.0 2020-12-26 19:16:01.146 error (10494) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Func zigbee.0 2020-12-26 19:16:01.144 error (10494) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2020-12-26 19:16:01.143 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:16:01.142 error (10494) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group. zigbee.0 2020-12-26 19:16:01.139 info (10494) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:16:01.136 info (10494) cleaned everything up... zigbee.0 2020-12-26 19:16:01.134 error (10494) Error: SRSP - ZDO - startupFromApp after 20000ms at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35) at listOnTimeout (internal/timers.js:55 zigbee.0 2020-12-26 19:16:01.133 error (10494) unhandled promise rejection: SRSP - ZDO - startupFromApp after 20000ms zigbee.0 2020-12-26 19:16:01.132 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:15:37.596 info (10494) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:15:37.437 info (10494) Starting Zigbee npm ... zigbee.0 2020-12-26 19:15:37.340 info (10494) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:09:34.655 info (7014) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2020-12-26 19:09:34.654 info (7014) terminating zigbee.0 2020-12-26 19:09:34.381 info (7014) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:09:34.378 info (7014) cleaned everything up... zigbee.0 2020-12-26 19:09:34.375 info (7014) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-12-26 19:09:00.163 info (7014) Zigbee started zigbee.0 2020-12-26 19:09:00.162 info (7014) 0x680ae2fffe0a50c2 (addr 64288): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:09:00.159 info (7014) 0x00158d000450d167 (addr 34485): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2020-12-26 19:09:00.154 info (7014) Currently 2 devices are joined: zigbee.0 2020-12-26 19:09:00.148 info (7014) --> transmitPower : low zigbee.0 2020-12-26 19:09:00.144 info (7014) Disable LED zigbee.0 2020-12-26 19:09:00.140 info (7014) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:08:58.311 info (7014) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:08:58.178 info (7014) Starting Zigbee npm ... zigbee.0 2020-12-26 19:08:58.063 info (7014) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:08:25.116 info (4018) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:08:25.113 info (4018) terminating zigbee.0 2020-12-26 19:08:24.820 info (4018) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:08:24.819 info (4018) cleaned everything up... zigbee.0 2020-12-26 19:08:24.818 error (4018) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at runMicrotasks (<anonymous>) at proces zigbee.0 2020-12-26 19:08:24.817 error (4018) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 19:08:24.817 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:08:11.513 info (4018) Zigbee: stop joining zigbee.0 2020-12-26 19:07:53.347 info (4018) DeviceConfigure successful 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:07:44.038 info (4018) Configuring 0x680ae2fffe0a50c2 TRADFRI on/off switch zigbee.0 2020-12-26 19:07:44.036 info (4018) Device '0x680ae2fffe0a50c2' is supported, identified as: IKEA TRADFRI ON/OFF switch (E1743) zigbee.0 2020-12-26 19:07:44.035 info (4018) Successfully interviewed '0x680ae2fffe0a50c2', device has succesfully been paired zigbee.0 2020-12-26 19:07:40.295 info (4018) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:06:05.002 info (4018) Zigbee: stop joining zigbee.0 2020-12-26 19:05:53.243 info (4018) Starting interview of '0x680ae2fffe0a50c2' zigbee.0 2020-12-26 19:05:33.771 info (4018) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:04:20.002 info (4018) Device '0x00158d000450d167' is supported, identified as: Xiaomi Aqara human body movement and illuminance sensor (RTCGQ11LM) zigbee.0 2020-12-26 19:04:20.000 info (4018) Successfully interviewed '0x00158d000450d167', device has succesfully been paired zigbee.0 2020-12-26 19:03:32.965 info (4018) Zigbee: stop joining zigbee.0 2020-12-26 19:03:13.850 info (4018) Starting interview of '0x00158d000450d167' zigbee.0 2020-12-26 19:03:01.705 info (4018) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:02:55.034 info (4018) Zigbee started zigbee.0 2020-12-26 19:02:55.033 info (4018) Currently no devices. zigbee.0 2020-12-26 19:02:55.027 info (4018) --> transmitPower : low zigbee.0 2020-12-26 19:02:55.023 info (4018) Disable LED zigbee.0 2020-12-26 19:02:55.019 info (4018) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:02:53.134 info (4018) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:02:52.996 info (4018) Starting Zigbee npm ... zigbee.0 2020-12-26 19:02:52.901 info (4018) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:02:42.279 info (3500) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:02:41.813 info (3500) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:02:41.812 info (3500) terminating zigbee.0 2020-12-26 19:02:41.753 error (3500) Failed to stop zigbee (Error: Cannot execute command, in Inter-PAN mode at ZStackAdapter.checkInterpanLock (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAda zigbee.0 2020-12-26 19:02:41.741 info (3500) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:02:41.738 info (3500) cleaned everything up... zigbee.0 2020-12-26 19:02:41.737 error (3500) Error: Cannot execute command, in Inter-PAN mode at ZStackAdapter.checkInterpanLock (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:875:19) at zigbee.0 2020-12-26 19:02:41.736 error (3500) unhandled promise rejection: Cannot execute command, in Inter-PAN mode zigbee.0 2020-12-26 19:02:41.736 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:02:41.732 info (3500) Zigbee: allowing new devices to join. zigbee.0 2020-12-26 19:01:42.480 error (3500) Device 0x00158d000450d167 "undefined" not described in statesMapping. zigbee.0 2020-12-26 19:01:42.439 info (3500) Zigbee started zigbee.0 2020-12-26 19:01:42.438 info (3500) 0x00158d000450d167 (addr 9233): Not supported (model undefined)(Unknown) zigbee.0 2020-12-26 19:01:42.436 info (3500) 0x680ae2fffe0a50c2 (addr 29150): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:01:42.429 info (3500) Currently 2 devices are joined: zigbee.0 2020-12-26 19:01:42.421 info (3500) --> transmitPower : low zigbee.0 2020-12-26 19:01:42.418 info (3500) Disable LED zigbee.0 2020-12-26 19:01:42.414 info (3500) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:01:40.502 info (3500) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:01:40.362 info (3500) Starting Zigbee npm ... zigbee.0 2020-12-26 19:01:40.264 info (3500) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6 zigbee.0 2020-12-26 19:01:17.929 info (2509) Terminated (NO_ERROR): Without reason zigbee.0 2020-12-26 19:01:17.928 info (2509) terminating zigbee.0 2020-12-26 19:01:17.423 info (2509) Zigbee: disabling joining new devices. zigbee.0 2020-12-26 19:01:17.421 info (2509) cleaned everything up... zigbee.0 2020-12-26 19:01:17.420 error (2509) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at processTicksAndRejections (internal/proce zigbee.0 2020-12-26 19:01:17.419 error (2509) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 19:01:17.418 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 19:00:20.578 error (2509) Device 0x00158d000450d167 "undefined" not described in statesMapping. zigbee.0 2020-12-26 19:00:20.530 info (2509) Zigbee started zigbee.0 2020-12-26 19:00:20.527 info (2509) 0x00158d000450d167 (addr 9233): Not supported (model undefined)(Unknown) zigbee.0 2020-12-26 19:00:20.524 info (2509) 0x680ae2fffe0a50c2 (addr 29150): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) zigbee.0 2020-12-26 19:00:20.516 info (2509) Currently 2 devices are joined: zigbee.0 2020-12-26 19:00:20.491 info (2509) --> transmitPower : low zigbee.0 2020-12-26 19:00:20.487 info (2509) Disable LED zigbee.0 2020-12-26 19:00:20.483 info (2509) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2020-12-26 19:00:17.150 info (2509) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-26 19:00:16.988 info (2509) Starting Zigbee npm ... zigbee.0 2020-12-26 19:00:16.875 info (2509) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6Was ist mein Problem?
-
@Rushmed
Installier mal Zigbee Adapter von Github, da ist es behoben, bin mir fast sicher.
-
@dimaiv Das hat nur etwas geholfen. Die meisten Ikea Geräte bringen den Adapter immer zum Absturz.
Auf welche FW sollte ich am sinnvollsten downgraden? -
@Rushmed
Habe gerade bei mir probiert, funktioniert fehlerfrei. Nur anlernen von tradfri Taster (egal 5er oder 2er) läuft nicht so wie früher, mann muss die ganze zeit drauf drücken, 1 mal pro sek.
Dann mach die Firmware von 0211, zu finden auf Koenkk Github Seite. -
@dimaiv Funktionieren alle Tasten bei dir?
Ich finde nur:
-
@Rushmed
liegt unter develop.
https://github.com/Koenkk/Z-Stack-firmware/tree/develop/coordinator/Z-Stack_3.0.x/binJa, alle Tasten und Taster funktionieren fehlerfrei.
-
@dimaiv Danke erstmal.
Das Problem bleibt bestehen.
Von der 5er Tradfri remote bringen zwei Tasten den Adapter zum Ansturz.
zigbee.0 2020-12-26 21:33:51.004 error (873) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:337:36) at runMicrotasks (<anonymous>) at process zigbee.0 2020-12-26 21:33:51.003 error (873) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2020-12-26 21:33:51.003 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2020-12-26 21:33:36.946 warn (873) DeviceConfigure failed 0x680ae2fffe0a50c2 TRADFRI on/off switch, attempt 1 (Error: Bind 0x680ae2fffe0a50c2/1 genPowerCfg from '0x00124b00192e81f8/1' failed (AREQ - ZDO - bindRsp after 10000ms)Zur Info, ich habe nach deiner Anleitung jedoch mit Version 6.9 des Lite Flashers installiert. Kann das meine Probleme verusachen?
@arteck Ich habe den Stick von dir, hast du evtl. noch die Firmware die bei der Auslieferung drauf war? Ich denke das war eine Version vom Februar 2020.
-
@Rushmed
Version von Lite Flasher macht nix, war damals aktuell.
Ich habe dir doch die Firmware von Februar verlinkt, 0211. -
@dimaiv Ja und von der ist der letzte Log.
-
@Rushmed
Dann ist nich die Firmware Schuld.
Mach komplett neue Installation von Zigbee Adapter.
Adapter entfernen.
Ordner zigbee_0 löschen.
Adapter installieren. -
@dimaiv DAs war ne sehrgute Idee, danke.
Sieht erstmal ganz gut aus, die meisten Geräte lassen sich bisher problemlos anlernen. -
@dimaiv also ich konnte den 2er vorgestern normal anlernen. Vier mal die kleine Taste im Batteriefach drücken und er war im pairing Modus. Hat sich dann auch verbunden ohne das ich noch was drücken musste
-
@vikk88 Ich denke das ging bei mir auch.
-
Direkt via USB flashen ohne Extragerät geht nicht oder?
Hab noch ne recht alte Firmware..
Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20190523}}
-
@ShneedleWoods
Bei deinem Stick geht es nicht.
Brauchst J-Link Adapter. -
Für den cc2538 benötigt es ja einen JTAG Adapter zum Flashen. Segger bieter Adapter an, aber regulär sind die nicht grad billig. Alternativ kann man die China-Klone nehmen, die aber irgendwann wieder von Segger gesperrt werden (letztendlich ja zurecht).
Für private Nutzung bietet Segger für kleines Geld allerdings den JLink EDU Mini für knapp 20€ an:
Die Stiftleiste ist leider im 1.27mm Format gehalten, von daher benötigt man noch einen Adapter:
https://www.amazon.de/-/en/gp/product/B07QKB3W97/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Das ganze wie unten auf dem Bild zu sehen zusammenstecken, und dann JFlash Lite öffnen. Als Target den cc2538sf53 wählen, als Interface JTAG.
Zum Schluß die Firmware Datei auswählen und flashen!
-
Hallo zusammen,
habe leider schon wieder massive Probleme mit Segger den CC2538 zu flashen.
Habe 2 CC2538 Boards vor mir liegen, eins selbst aufgebaut, das andere fertig gekauft.
Zum Flashen habe ich den normalen original Segger J-Link und die aktuelle SW 7.20
Folgender Fehler kommt immer:Application log started - J-Flash V7.20 (J-Flash compiled Apr 28 2021 17:34:40) - JLinkARM.dll V7.20 (DLL compiled Apr 28 2021 17:34:08) Reading flash device list [C:\Program Files (x86)\SEGGER\Flasher\ETC/JFlash/Flash.csv] ... - List of flash devices read successfully (451 Devices) Reading MCU device list ... - List of MCU devices read successfully (8389 Devices) Creating new project ... - New project created successfully Connecting ... - Connecting via USB to probe/ programmer device 0 - Probe/ Programmer firmware: J-Link ARM V6 compiled Jun 20 2012 19:43:26 - Device "CC2538SF53" selected. - Target interface speed: 4000 kHz (Fixed) - VTarget = 3.313V - InitTarget: Found ICE-Pick with ID: 0x8B96402F - InitTarget: Found CPU TAP 0x4BA00477 - DPv0 detected - Scanning AP map to find all available APs - AP[1]: Stopped AP scan as end of AP map has been reached - AP[0]: AHB-AP (IDR: 0x24770011) - Iterating through AP map to find AHB-AP to use - AP[0]: Core found - AP[0]: AHB-AP ROM base: 0xE00FF000 - CPUID register: 0x412FC230. Implementer code: 0x41 (ARM) - Found Cortex-M3 r2p0, Little endian. - ERROR: Failed to connect. Could not establish a connection to target.Ich habe auch schon "SWD" probiert und auch mit der EDU Mini besorgt, da der J-Link uralt in der V6.0 ist.
Überall das Gleiche.Gibt es eine besondere Reihenfolge wie man das ansteckt? Taster am CC2538?
Power des CC2538 habe ich von einer Powerbank genommen, da er sich am Notebook immer enummeriert.Irgendwie riecht das Problem danach, dass er den Reset nicht ziehen kann, habe aber hier leider kein Scope um das zu checken.
Zumindest erkennt er den Chip.Nachtrag:
Es läuft endlich wieder !!!
Und zwar hatte ich einfach mal eine ältere Segger J-Link Software ausprobiert.
Mit der V6.70 ging es dann. Aber auch nur mit dem Lite.
Für alle die auch Probleme mit dem Flashen haben. -
@dimaiv Ich habe damals einen Stick von dir gekauft und möchte ihn jetzt updaten. Den Jlink habe ich organisiert ich muss jetzt nur die Kabel "anbringen", wo mache ich dIe dran?
Für diesen Stick dann auch die Firmware "USB stick MODKAM_V3.hex" nehmen?
Gruß
Ja.rod
