[Aufruf] ZigBee CC253x Adapter

worfinator

Geräte mit Dauer-Strom können per Mesh normaler Weise das Signal verstärken.

Stoni

Geräte mit Dauer-Strom können per Mesh normaler Weise das Signal verstärken. ` Also beispielsweise Steckdosen wie die Smart+ von Osram? Was ist mit Leuchten, die hängen ja auch am Dauerstrom? Was ist mit Batteriebetriebenen Sensoren? Die dann wohl eher nicht oder?

Gesendet von meinem MI 8 mit Tapatalk

worfinator

Smart+ verstärkt und die Leuchten auch so gut wie alle. Batterie-Geräte hingegen nicht.

arteck

ALLE AM STROM HÄNGENDEN GERÄTE…

EGAL was es ist.. fungieren als Repeater

Kueppert

Cool, hab nen Haufen Osram smart+ Steckdosen. Gilt ja dann auch für die

Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk

der_Auge

Habe mir nun auch ein Stick zugelegt.

Wird wohl Anfang der Woche da sein.

Dann kann ich mit testen.

ZigBee ist ja Mittlerweile eine spannende Sache geworden.

Gruß

Jürgen

Stoni

~~@der_Auge:~~

Habe mir nun auch ein Stick zugelegt.

Wird wohl Anfang der Woche da sein.

Dann kann ich mit testen.

ZigBee ist ja Mittlerweile eine spannende Sache geworden.

Gruß

Jürgen ` Wo hast Du Deinen her? Hatte hier im Forum auch schonmal gelesen, dass jemand mehrere Sticks anbietet.

Gesendet von meinem MI 8 mit Tapatalk

Kueppert

~~@arteck:~~

ALLE AM STROM HÄNGENDEN GERÄTE…

EGAL was es ist.. fungieren als Repeater ` Auch, wenn der Plug zwar am Netz hängt aber ausgeschaltet ist? Denke ja, weiß es aber aktuell noch nicht sicher…

Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk

umbm

~~@Kueppert:~~

~~@arteck:~~

ALLE AM STROM HÄNGENDEN GERÄTE…

EGAL was es ist.. fungieren als Repeater ` Auch, wenn der Plug zwar am Netz hängt aber ausgeschaltet ist? Denke ja, weiß es aber aktuell noch nicht sicher…

Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk ` Definitiv ja.

Der Schaltzustand des Plugs ist unwichtig, er ist ja permanent auf Empfang/Bereitschaft und somit ist auch der Repeater/Router aktiv.

Deshalb machen es die Batterie-Aktoren ja auch nicht, weil die nur kurzzeitig zum Senden der eigenen Daten aktiv sind.

NetFritz

Hallo

Habe den ConBee für Deconz mit dem dezonz-Adapter.

Ist die Lösung mit dem ZigBee CC253x Adapter smarter ?

Der ConBee Stick kann der für diesen Adapter auch verwendet werden ?

Gruß NetFritz

worfinator

Meines Erachtens ist der Adapter schon sehr spezifisch für den CC253X gebaut. Glaube nicht, dass der Adapter mit deiner Hardware funktioniert.

Das ist alles sehr Low Cost mit dem CC253X, dafür aber noch nicht ausgereift. Insgesamt aber vielversprechend.

Das kann wirklich eine richtig gute Lösung werden…

der_Auge

Hallo,

Adapter läuft.

Das erste Device angelernt.

2018-08-27 14:28:34.515  - debug: zigbee.0 Join countdown. 44
2018-08-27 14:28:34.522  - debug: zigbee.0 User stateChange zigbee.0.info.pairingCountdown {"val":44,"ack":false,"ts":1535372914518,"q":0,"from":"system.adapter.zigbee.0","lc":1535372914518}
2018-08-27 14:28:34.526  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Time left: 44","ack":false,"ts":1535372914521,"q":0,"from":"system.adapter.zigbee.0","lc":1535372914521}
2018-08-27 14:28:35.397  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":1},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:35.399  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":11}
2018-08-27 14:28:35.407  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 11%","ack":false,"ts":1535372915400,"q":0,"from":"system.adapter.zigbee.0","lc":1535372915400}
2018-08-27 14:28:35.517  - debug: zigbee.0 Join countdown. 43
2018-08-27 14:28:35.528  - debug: zigbee.0 User stateChange zigbee.0.info.pairingCountdown {"val":43,"ack":false,"ts":1535372915518,"q":0,"from":"system.adapter.zigbee.0","lc":1535372915518}
2018-08-27 14:28:35.529  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Time left: 43","ack":false,"ts":1535372915523,"q":0,"from":"system.adapter.zigbee.0","lc":1535372915523}
2018-08-27 14:28:35.550  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":2},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:35.551  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":22}
2018-08-27 14:28:35.561  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 22%","ack":false,"ts":1535372915552,"q":0,"from":"system.adapter.zigbee.0","lc":1535372915552}
2018-08-27 14:28:35.690  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":3},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:35.691  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":33}
2018-08-27 14:28:35.701  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 33%","ack":false,"ts":1535372915692,"q":0,"from":"system.adapter.zigbee.0","lc":1535372915692}
2018-08-27 14:28:35.869  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":4},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:35.870  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":44}
2018-08-27 14:28:35.877  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 44%","ack":false,"ts":1535372915870,"q":0,"from":"system.adapter.zigbee.0","lc":1535372915870}
2018-08-27 14:28:36.032  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":5},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:36.034  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":56}
2018-08-27 14:28:36.041  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 56%","ack":false,"ts":1535372916035,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916035}
2018-08-27 14:28:36.244  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":6},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:36.245  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":67}
2018-08-27 14:28:36.254  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 67%","ack":false,"ts":1535372916246,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916246}
2018-08-27 14:28:36.319  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":7},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:36.320  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":78}
2018-08-27 14:28:36.327  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 78%","ack":false,"ts":1535372916321,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916321}
2018-08-27 14:28:36.417  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":8},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:36.418  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":89}
2018-08-27 14:28:36.425  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 89%","ack":false,"ts":1535372916419,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916419}
2018-08-27 14:28:36.518  - debug: zigbee.0 Join countdown. 42
2018-08-27 14:28:36.525  - debug: zigbee.0 User stateChange zigbee.0.info.pairingCountdown {"val":42,"ack":false,"ts":1535372916519,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916519}
2018-08-27 14:28:36.527  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Time left: 42","ack":false,"ts":1535372916522,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916522}
2018-08-27 14:28:36.618  - debug: zigbee.0 handleMessage. {"type":"devInterview","status":{"endpoint":{"current":3,"cluster":{"total":9,"current":9},"total":1}},"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:36.619  - debug: zigbee.0 Device 0x7cb03eaa00ac2638 try to connect {"totalEp":1,"currentEp":3,"progress":100}
2018-08-27 14:28:36.635  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"Interview state: step 3/1\. progress: 100%","ack":false,"ts":1535372916619,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916619}
2018-08-27 14:28:36.642  - debug: zigbee.0 handleMessage. {"type":"devIncoming","endpoints":[{"device":{"_id":2,"type":"Router","ieeeAddr":"0x7cb03eaa00ac2638","nwkAddr":19504,"manufId":48042,"manufName":"OSRAM","powerSource":"Mains (single phase)","modelId":"Classic A60 W clear - LIGHTIFY","epList":[3],"status":"online","joinTime":1535372914,"endpoints":{"3":"[Circular]"}},"profId":49246,"epId":3,"devId":256,"inClusterList":[0,3,4,5,6,8,4096,64527],"outClusterList":[25],"clusters":{"64527":{"dir":{"cid":"64527","sid":"dir","value":1},"attrs":{"0":0,"cid":"64527","sid":"attrs"}},"zapp":null,"genBasic":{"dir":{"cid":"genBasic","sid":"dir","value":1},"attrs":{"cid":"genBasic","sid":"attrs","zclVersion":1,"appVersion":0,"stackVersion":2,"hwVersion":1,"manufacturerName":"OSRAM","modelId":"Classic A60 W clear - LIGHTIFY","dateCode":"20140331CNEF****","powerSource":1,"deviceEnabled":1,"swBuildId":"V1.04.12"}},"genIdentify":{"dir":{"cid":"genIdentify","sid":"dir","value":1},"attrs":{"cid":"genIdentify","sid":"attrs","identifyTime":0}},"genGroups":{"dir":{"cid":"genGroups","sid":"dir","value":1},"attrs":{"cid":"genGroups","sid":"attrs","nameSupport":0}},"genScenes":{"dir":{"cid":"genScenes","sid":"dir","value":1},"attrs":{"cid":"genScenes","sid":"attrs","count":0,"currentScene":0,"currentGroup":0,"sceneValid":0,"nameSupport":0}},"genOnOff":{"dir":{"cid":"genOnOff","sid":"dir","value":1},"attrs":{"cid":"genOnOff","sid":"attrs","onOff":1,"globalSceneCtrl":1,"onTime":0,"offWaitTime":0}},"genLevelCtrl":{"dir":{"cid":"genLevelCtrl","sid":"dir","value":1},"attrs":{"cid":"genLevelCtrl","sid":"attrs","currentLevel":254,"remainingTime":0,"onOffTransitionTime":0,"onLevel":255,"onTransitionTime":0,"offTransitionTime":0,"defaultMoveRate":255}},"genOta":{"dir":{"cid":"genOta","sid":"dir","value":2},"attrs":{"cid":"genOta","sid":"attrs"}},"lightLink":{"dir":{"cid":"lightLink","sid":"dir","value":1},"attrs":{"cid":"lightLink","sid":"attrs"}}},"onAfDataConfirm":null,"onAfReflectError":null,"onAfIncomingMsg":null,"onAfIncomingMsgExt":null,"onZclFoundation":null,"onZclFunctional":null}],"data":"0x7cb03eaa00ac2638"}
2018-08-27 14:28:36.643  - debug: zigbee.0 new device 0x7cb03eaa00ac2638 joining the network!
2018-08-27 14:28:36.646  - info: zigbee.0 new dev 0x7cb03eaa00ac2638 19504 Classic A60 W clear - LIGHTIFY
2018-08-27 14:28:36.650  - debug: zigbee.0 handleMessage. {"type":"devStatus","endpoints":[{"device":{"_id":2,"type":"Router","ieeeAddr":"0x7cb03eaa00ac2638","nwkAddr":19504,"manufId":48042,"manufName":"OSRAM","powerSource":"Mains (single phase)","modelId":"Classic A60 W clear - LIGHTIFY","epList":[3],"status":"online","joinTime":1535372914,"endpoints":{"3":"[Circular]"}},"profId":49246,"epId":3,"devId":256,"inClusterList":[0,3,4,5,6,8,4096,64527],"outClusterList":[25],"clusters":{"64527":{"dir":{"cid":"64527","sid":"dir","value":1},"attrs":{"0":0,"cid":"64527","sid":"attrs"}},"zapp":null,"genBasic":{"dir":{"cid":"genBasic","sid":"dir","value":1},"attrs":{"cid":"genBasic","sid":"attrs","zclVersion":1,"appVersion":0,"stackVersion":2,"hwVersion":1,"manufacturerName":"OSRAM","modelId":"Classic A60 W clear - LIGHTIFY","dateCode":"20140331CNEF****","powerSource":1,"deviceEnabled":1,"swBuildId":"V1.04.12"}},"genIdentify":{"dir":{"cid":"genIdentify","sid":"dir","value":1},"attrs":{"cid":"genIdentify","sid":"attrs","identifyTime":0}},"genGroups":{"dir":{"cid":"genGroups","sid":"dir","value":1},"attrs":{"cid":"genGroups","sid":"attrs","nameSupport":0}},"genScenes":{"dir":{"cid":"genScenes","sid":"dir","value":1},"attrs":{"cid":"genScenes","sid":"attrs","count":0,"currentScene":0,"currentGroup":0,"sceneValid":0,"nameSupport":0}},"genOnOff":{"dir":{"cid":"genOnOff","sid":"dir","value":1},"attrs":{"cid":"genOnOff","sid":"attrs","onOff":1,"globalSceneCtrl":1,"onTime":0,"offWaitTime":0}},"genLevelCtrl":{"dir":{"cid":"genLevelCtrl","sid":"dir","value":1},"attrs":{"cid":"genLevelCtrl","sid":"attrs","currentLevel":254,"remainingTime":0,"onOffTransitionTime":0,"onLevel":255,"onTransitionTime":0,"offTransitionTime":0,"defaultMoveRate":255}},"genOta":{"dir":{"cid":"genOta","sid":"dir","value":2},"attrs":{"cid":"genOta","sid":"attrs"}},"lightLink":{"dir":{"cid":"lightLink","sid":"dir","value":1},"attrs":{"cid":"lightLink","sid":"attrs"}}},"onAfDataConfirm":null,"onAfReflectError":null,"onAfIncomingMsg":null,"onAfIncomingMsgExt":null,"onZclFoundation":null,"onZclFunctional":null}],"data":"online"}
2018-08-27 14:28:36.650  - debug: zigbee.0 Message without data cluster!
2018-08-27 14:28:36.654  - debug: zigbee.0 User stateChange zigbee.0.info.pairingMessage {"val":"New device joined 0x7cb03eaa00ac2638 model Classic A60 W clear - LIGHTIFY","ack":false,"ts":1535372916646,"q":0,"from":"system.adapter.zigbee.0","lc":1535372916646}
2018-08-27 14:28:36.673  - debug: zigbee.0 Device 7cb03eaa00ac2638 "Classic A60 W clear - LIGHTIFY" not described in statesMapping.
2018-08-27 14:28:36.757  - debug: zigbee.0 getDevices result: [{"type":"device","common":{"name":"Classic A60 W clear - LIGHTIFY","type":"Classic A60 W clear - LIGHTIFY","icon":"img/unknown.png"},"from":"system.adapter zigbee.0","ts":1535372916665,"_id":"zigbee.0.7cb03eaa00ac2638","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"},"icon":"img/unknown.png","rooms":[],"info":{"type":"Router","ieeeAddr":"0x7cb03eaa00ac2638","nwkAddr":19504,"manufId":48042,"manufName":"OSRAM","powerSource":"Mains (single phase)","modelId":"Classic A60 W clear - LIGHTIFY","epList":[3],"status":"online","joinTime":1535372914},"paired":true},{"_id":"0x00124b0014d9d7f7","icon":"img/unknown.png","paired":true,"info":{"type":"Coordinator","ieeeAddr":"0x00124b0014d9d7f7","nwkAddr":0,"manufId":0,"epList":[1,2,3,4,5,6],"status":"online","joinTime":1535364174},"common":{}}]
2018-08-27 14:28:36.758  - debug: zigbee.0 sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
2018-08-27 14:28:36.777  - debug: zigbee.0 getDevices result: [{"type":"device","common":{"name":"Classic A60 W clear - LIGHTIFY","type":"Classic A60 W clear - LIGHTIFY","icon":"img/unknown.png"},"from":"system.adapter zigbee.0","ts":1535372916665,"_id":"zigbee.0.7cb03eaa00ac2638","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"},"icon":"img/unknown.png","rooms":[],"info":{"type":"Router","ieeeAddr":"0x7cb03eaa00ac2638","nwkAddr":19504,"manufId":48042,"manufName":"OSRAM","powerSource":"Mains (single phase)","modelId":"Classic A60 W clear - LIGHTIFY","epList":[3],"status":"online","joinTime":1535372914},"paired":true},{"_id":"0x00124b0014d9d7f7","icon":"img/unknown.png","paired":true,"info":{"type":"Coordinator","ieeeAddr":"0x00124b0014d9d7f7","nwkAddr":0,"manufId":0,"epList":[1,2,3,4,5,6],"status":"online","joinTime":1535364174},"common":{}}]
2018-08-27 14:28:36.778  - debug: zigbee.0 sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
2018-08-27 14:28:37.520  - debug: zigbee.0 Join countdown. 41

Wie lange wird es dauern bis ich die Lampe schalten kann ?

Gruß

Jürgen

worfinator

Es sieht so aus, dass das Gerät nicht unterstützt wird. Du kannst einen Case bei Github aufmachen und um Unterstützung bitten. Das sollte bei der Lampe eigentlich machbar sein. Eventuell kann alternativ auch arteck hier im Thread weiterhelfen.

arteck

installiere den adapter aus meiner Repo dann gehts direkt

https://github.com/arteck/ioBroker.zigbee

wird in der nächsten Version offiziell

der_Auge

~~@arteck:~~

installiere den adapter aus meiner Repo dann gehts direkt

https://github.com/arteck/ioBroker.zigbee

wird in der nächsten Version offiziell `

Habe den Adapter gelöscht und neu über die URL installiert

Nun wird die Lampe angezeigt

Leider kann ich sie nicht schalten / Dimmen

Gruß

Jürgen

arteck

stoppe den Adapter

lösche nur das Objekt ..

starte den Adapter

Das Objekt wird dann neu erzeugt..

ansonsten wieder melden dann schau ich mir das heute Abend an

der_Auge

leider ohne erfolg

Gruß

Jürgen

Lars89

Hallo, das selbe Problem hatte ich auch mit dieser Lampe. Leider habe ich bisher auch noch keine Lösung gefunden, Habe auch alle Versionen ausprobiert.

Gruß Lars

arteck

so Fehler gefunden

stoppe den Adapter

installiere den adapter aus meiner Repo dann gehts direkt

https://github.com/arteck/ioBroker.zigbee

lösche nur das Objekt ..

starte den Adapter

Lars89

Es funktioniert. Vielen vielen Dank.

Gruß Lars

NEWS

[Aufruf] ZigBee CC253x Adapter

Support us

707
Online

30.2k
Users

76.2k
Topics

1.2m
Posts

NEWS

[Aufruf] ZigBee CC253x Adapter

Support us

707Online

30.2kUsers

76.2kTopics

1.2mPosts

707
Online

30.2k
Users

76.2k
Topics

1.2m
Posts